nfs client does not see nfs server - Networking

This is a discussion on nfs client does not see nfs server - Networking ; Hello, first, for any regulars who may find this post eerily familiar, yes, I have read this very similar thread: http://groups.google.com/group/comp....b08216d60e5651 But I'm still lost in the woods. Among the howto's I've found, I'm leaning on this one the most: ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: nfs client does not see nfs server

  1. nfs client does not see nfs server

    Hello,

    first, for any regulars who may find this post eerily familiar, yes, I
    have read this very similar thread:
    http://groups.google.com/group/comp....b08216d60e5651

    But I'm still lost in the woods.

    Among the howto's I've found, I'm leaning on this one the most:
    http://nfs.sourceforge.net/nfs-howto/index.html

    Here's my situation.

    Two SuSE 10.1 boxes, server's named May; client is June. NFS appears
    to be running on May and both computers see the same services:
    ---
    June:/ # /usr/sbin/rpcinfo -p may
    program vers proto port
    100000 2 tcp 111 portmapper
    100000 2 udp 111 portmapper
    100003 2 udp 2049 nfs
    100003 3 udp 2049 nfs
    100003 4 udp 2049 nfs
    100003 2 tcp 2049 nfs
    100003 3 tcp 2049 nfs
    100003 4 tcp 2049 nfs
    100024 1 udp 1420 status
    100021 1 udp 1420 nlockmgr
    100021 3 udp 1420 nlockmgr
    100021 4 udp 1420 nlockmgr
    100024 1 tcp 14993 status
    100021 1 tcp 14993 nlockmgr
    100021 3 tcp 14993 nlockmgr
    100021 4 tcp 14993 nlockmgr
    100005 1 udp 996 mountd
    100005 1 tcp 997 mountd
    100005 2 udp 996 mountd
    100005 2 tcp 997 mountd
    100005 3 udp 996 mountd
    100005 3 tcp 997 mountd
    ---

    Here is May's /etc/exports
    ----
    /band/ 192.168.0.0/255.255.255.0(rw)
    ---

    Here is May's /etc/hosts
    ---
    127.0.0.1 localhost

    # special IPv6 addresses
    ::1 localhost ipv6-localhost ipv6-loopback

    fe00::0 ipv6-localnet

    ff00::0 ipv6-mcastprefix
    ff02::1 ipv6-allnodes
    ff02::2 ipv6-allrouters
    ff02::3 ipv6-allhosts
    192.168.1.104 Holly
    127.0.0.2 May
    192.168.1.108 June
    ---

    Here is May's /etc/hosts.deny
    ---
    portmap:ALL
    lockd:ALL
    mountd:ALL
    rquotad:ALL
    statd:ALL
    ---

    Here is May's /etc/hosts.allow
    ---
    portmap: 192.168.1.108(rw)
    lockd: 192.168.1.108(rw)
    mountd: 192.168.1.108(rw)
    rquotad: 192.168.1.1089(rw)
    statd: 192.168.1.108(rw)
    ---

    I have been following this howto:
    http://nfs.sourceforge.net/nfs-howto/index.html

    This is what I get when I tell June to mount the directory band,

    June:/ # mount may://beverly /mnt/beverly
    mount server reported tcp not available, falling back to udp
    mount: RPC: Program not registered

    What do you think I should do?


  2. Re: nfs client does not see nfs server

    Hi Niels,

    Niels Olson schrieb:
    [...]

    > Here is May's /etc/hosts.allow
    > ---
    > portmap: 192.168.1.108(rw)
    > lockd: 192.168.1.108(rw)
    > mountd: 192.168.1.108(rw)
    > rquotad: 192.168.1.1089(rw)

    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    This is not an ip address (.1089).

    Dirk

+ Reply to Thread