[VPN] Re: VPN to Netgear FVS318 v2.4
Thanks Travis
I tried the Class B too, that didn't work, so it looks like we're stuck
with Class C. I've helped the netgear admin open a ticket with netgear.
....I really don't feel like managing all the class C's but will if I
have to. ...hopefully Netgear will come back with something.
~Todd
-----Original Message-----
From: vpn-bounces+tsimons=delphi-tech.com@lists.shmoo.com
[mailto:vpn-bounces+tsimons=delphi-tech.com@lists.shmoo.com] On Behalf
Of Travis Watson
Sent: Thursday, June 01, 2006 7:46 PM
To: [email]SymantecFirewalls@yahoogroups.com[/email]
Cc: [email]vpn@lists.shmoo.com[/email]
Subject: [VPN] Re: VPN to Netgear FVS318 v2.4
Todd,
I've never set up a tunnel with a Netgear, but I know that it is more of
a SOHO appliance, of course. Their design people probably never
anticipated something like a /20 being used by their customers. I would
either just enter all 16 class Cs or, if it can do it, build the tunnel
for a class B (if you have that much IP space anyway). I've done things
like that for a work around. On the non-netgear side you can build the
tunnel for a class B to, say, tcp port 3, and then the rules below it
can give more granular access to the stuff you really want them to have.
Just a thought.
The encouraging thing is that you can do it for a class C. If it can do
that, a class B is (hopefully) possible.
Good luck,
Travis
Todd M. Simons wrote:[color=blue]
>
> Hello All
>
> We have a 20 bit subnet mask (255.255.240.0 aka 0.0 thru 15.255),
> We're trying to setup a VPN to a Netgear FVS318 v2.1 but can't get
> Phase 2 to come up for our entire subnet. We can bring up a VPN to a
> single host in our subnet, or to a Class C section ( x.x.x.1 to
> x.x.x.255), but not our 20bit mask (x.x.0.1 to x.x.15.255)
>
> The Netgear requires a start and end address (not a subnet and mask)
> on its VPN settings. We've tried all combinations. The netgear side is[/color]
[color=blue]
> odd, for the Class C it takes 1 to 255 as beginning and end address,
> not to 254. I tried all different combinations with the remote Netgear[/color]
[color=blue]
> admin, and got nothing.
>
> I've asked him to upgrade to the lastest firmware (v2.4)
>
> Has anyone ever setup a VPN to this model Netgear?
>
> Thanks,
> ~Todd
> _____________________________
> */Todd M. Simons/*
> *IT Supervisor*
> *Delphi Technology, Inc*
> *New Brunswick, NJ*
>
> ###########################################
>
> This message has been scanned by F-Secure Anti-Virus for Microsoft
> Exchange.
> For more information, connect to [url]http://www.f-secure.com/[/url]
>
> SPONSORED LINKS
> Technical support
>[/color]
<[url]http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp[/url]
ort&w2=Computer+security&w3=Computer+technical+support&w4=Computer+train
ing&w5=Free+computer+technical+support&c=5&s=138&.sig=77sbeaNS_CB99ND1Np
Q02w>[color=blue]
> Computer security
>[/color]
<[url]http://groups.yahoo.com/gads?t=ms&k=Computer+security&w1=Technical+supp[/url]
ort&w2=Computer+security&w3=Computer+technical+support&w4=Computer+train
ing&w5=Free+computer+technical+support&c=5&s=138&.sig=h-vpfglcVDyMom6ZGR
j-AA>[color=blue]
> Computer technical support
> <[url]http://groups.yahoo.com/gads?t=ms&k=Computer+technical+support&w1=Tec[/url]
> hnical+support&w2=Computer+security&w3=Computer+technical+support&w4=C
> omputer+training&w5=Free+computer+technical+support&c=5&s=138&.sig=0Pt
> Ye-giICy1KkECNuG2EA>
>
> Computer training
>[/color]
<[url]http://groups.yahoo.com/gads?t=ms&k=Computer+training&w1=Technical+supp[/url]
ort&w2=Computer+security&w3=Computer+technical+support&w4=Computer+train
ing&w5=Free+computer+technical+support&c=5&s=138&.sig=psUjUcHSklN7Uvu_cJ
ch-g>[color=blue]
> Free computer technical support
> <[url]http://groups.yahoo.com/gads?t=ms&k=Free+computer+technical+support&w[/url]
> 1=Technical+support&w2=Computer+security&w3=Computer+technical+support
> &w4=Computer+training&w5=Free+computer+technical+support&c=5&s=138&.si
> g=isTctikpuewr3b607bkoUA>
>
>
>
> ----------------------------------------------------------------------
> --
> YAHOO! GROUPS LINKS
>
> * Visit your group "SymantecFirewalls
> <http://groups.yahoo.com/group/SymantecFirewalls>" on the web.
> * To unsubscribe from this group, send an email to:
> [email]SymantecFirewalls-unsubscribe@yahoogroups.com[/email]
>[/color]
<mailto:SymantecFirewalls-unsubscribe@yahoogroups.com?subject=Unsubscrib
e>[color=blue]
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
> ----------------------------------------------------------------------
> --
>
> ----------------------------------------------------------------------
> --
>
> _______________________________________________
> VPN mailing list
> [email]VPN@lists.shmoo.com[/email]
> [url]http://lists.shmoo.com/mailman/listinfo/vpn[/url][/color]
_______________________________________________
VPN mailing list
[email]VPN@lists.shmoo.com[/email]
[url]http://lists.shmoo.com/mailman/listinfo/vpn[/url]
##Scanned by dti##
_______________________________________________
VPN mailing list
[email]VPN@lists.shmoo.com[/email]
[url]http://lists.shmoo.com/mailman/listinfo/vpn[/url]
