Re: [mp2] make fails - `modperl_thx_interp_get' undeclared here (notin a function) - modperl

This is a discussion on Re: [mp2] make fails - `modperl_thx_interp_get' undeclared here (notin a function) - modperl ; Charlie Reddington wrote: > > -------------8 > 1. Problem Description: > > I am trying to statically build mod_perl into apache. I start it off > by running the command..... > > perl Makefile.PL MP_USE_STATIC=1 \ > MP_AP_PREFIX=/home/charlier/httpd-2.0.63 \ > ...

+ Reply to Thread
Results 1 to 4 of 4

Thread: Re: [mp2] make fails - `modperl_thx_interp_get' undeclared here (notin a function)

  1. Re: [mp2] make fails - `modperl_thx_interp_get' undeclared here (notin a function)

    Charlie Reddington wrote:
    >
    > -------------8<---------- Start Bug Report ------------8<----------
    > 1. Problem Description:
    >
    > I am trying to statically build mod_perl into apache. I start it off
    > by running the command.....
    >
    > perl Makefile.PL MP_USE_STATIC=1 \
    > MP_AP_PREFIX=/home/charlier/httpd-2.0.63 \
    > MP_AP_CONFIGURE="--prefix=/usr/local/apache-2.0.63 --enable-ssl
    > --enable-rewrite --enable-so --with-included-apr --enable-cgi"


    You are passing options to build both as a static module and as a shared
    object. The error below was seen about a week ago:

    http://www.gossamer-threads.com/list...erp_get;#97894

    Suggest rebuilding without MP_USE_STATIC=1 and just building the .so

    >
    > This seems to go well and doesn't throw any red flags. From here I run
    > 'make'. It goes and fails with the following lines. Throughout the make
    > process everything else seems fine.
    >
    > cc -I/home/charlier/mod_perl-2.0.4/src/modules/perl
    > -I/home/charlier/mod_perl-2.0.4/xs -I/home/charlier/httpd-2.0.63/include
    > -I/home/charlier/httpd-2.0.63/srclib/apr/include
    > -I/home/charlier/httpd-2.0.63/srclib/apr-util/include
    > -I/home/charlier/httpd-2.0.63/os/unix -fno-strict-aliasing -pipe
    > -Wdeclaration-after-statement -I/usr/local/include -I/usr/include/gdbm
    > -I/usr/local/lib/perl5/5.8.8/x86_64-linux/CORE -DMOD_PERL -DMP_COMPAT_1X
    > -O2 -c modperl_exports.c
    > modperl_exports.c:1169: error: `modperl_thx_interp_get' undeclared here
    > (not in a function)
    > modperl_exports.c:1173: error: `modperl_thx_interp_set' undeclared here
    > (not in a function)
    > make[1]: *** [modperl_exports.o] Error 1
    > make[1]: Leaving directory `/home/charlier/mod_perl-2.0.4/src/modules/perl'
    > make: *** [modperl_lib] Error 2
    >
    > I have tried with the current version of mod-perl and the latest. I get
    > the same result every time.
    >
    > I have also tried the following versions of apache - 2.0.63, 2.2.6,
    > 2.2.9 all fail with the similar message.
    >
    > The only other thing to note is that perl was built with ccflags='fPIC'
    > but the rest is pretty much the accepted defaults in regards to an
    > x86_64 system.
    >
    > 2. Used Components and their Configuration:
    >
    > *** mod_perl version 2.000004
    >
    > *** using /home/charlier/mod_perl-2.0.4/lib/Apache2/BuildConfig.pm
    >
    > *** Makefile.PL options:
    > MP_APR_LIB => aprext
    > MP_AP_CONFIGURE => --prefix=/usr/local/apache-2.0.63 --enable-ssl
    > --enable-rewrite --enable-so --with-included-apr --enable-cgi
    > MP_AP_PREFIX => /home/charlier/httpd-2.0.63
    > MP_COMPAT_1X => 1
    > MP_GENERATE_XS => 1
    > MP_LIBNAME => mod_perl
    > MP_USE_STATIC => 1
    >
    >
    > *** The httpd binary was not found
    >
    >
    > *** (apr|apu)-config linking info
    >
    > -L/home/charlier/httpd-2.0.63/srclib/apr-util/.libs
    > -L/home/charlier/httpd-2.0.63/srclib/apr-util -laprutil-0 -lexpat
    > -L/home/charlier/httpd-2.0.63/srclib/apr/.libs
    > -L/home/charlier/httpd-2.0.63/srclib/apr -lapr-0 -lrt -lm -lcrypt
    > -lnsl -lpthread -ldl
    >
    >
    >
    > *** /usr/local/bin/perl5.8.8 -V
    > Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
    > Platform:
    > osname=linux, osvers=2.6.9-67.0.1.elsmp, archname=x86_64-linux
    > uname='linux serv45.services.cymru.com 2.6.9-67.0.1.elsmp #1 smp fri
    > nov 30 11:57:43 est 2007 x86_64 x86_64 x86_64 gnulinux '
    > config_args=''
    > hint=recommended, useposix=true, d_sigaction=define
    > usethreads=undef use5005threads=undef useithreads=undef
    > usemultiplicity=undef
    > useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    > use64bitint=define use64bitall=define uselongdouble=undef
    > usemymalloc=n, bincompat5005=undef
    > Compiler:
    > cc='cc', ccflags ='-fno-strict-aliasing -pipe
    > -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE
    > -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    > optimize='-O2',
    > cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement
    > -I/usr/local/include -I/usr/include/gdbm'
    > ccversion='', gccversion='3.4.6 20060404 (Red Hat 3.4.6-9)',
    > gccosandvers=''
    > intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    > d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    > ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
    > lseeksize=8
    > alignbytes=8, prototype=define
    > Linker and Libraries:
    > ld='cc', ldflags =' -L/usr/local/lib'
    > libpth=/usr/local/lib /lib /usr/lib
    > libs=-lnsl -ldl -lm -lcrypt -lutil -lc
    > perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    > libc=/lib/libc-2.3.4.so, so=so, useshrplib=false, libperl=libperl.a
    > gnulibc_version='2.3.4'
    > Dynamic Linking:
    > dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    > cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
    >
    >
    > Characteristics of this binary (from libperl):
    > Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
    > USE_LARGE_FILES USE_PERLIO
    > Built under linux
    > Compiled at Aug 28 2008 16:56:21
    > %ENV:
    > PERL_LWP_USE_HTTP_10="1"
    > @INC:
    > /usr/local/lib/perl5/5.8.8/x86_64-linux
    > /usr/local/lib/perl5/5.8.8
    > /usr/local/lib/perl5/site_perl/5.8.8/x86_64-linux
    > /usr/local/lib/perl5/site_perl/5.8.8
    > /usr/local/lib/perl5/site_perl
    > .
    >
    > *** Packages of interest status:
    >
    > Apache2 : -
    > Apache2::Request : -
    > CGI : 3.15
    > ExtUtils::MakeMaker: 6.30
    > LWP : -
    > mod_perl : -
    > mod_perl2 : -
    >
    >
    > 3. This is the core dump trace: (if you get a core dump):
    >
    > [CORE TRACE COMES HERE]
    >
    > This report was generated by ./REPORT on Thu Aug 28 20:34:21 2008 GMT.
    >
    > -------------8<---------- End Bug Report --------------8<----------
    >
    > Note: Complete the rest of the details and post this bug report to
    > modperl perl.apache.org. To subscribe to the list send an empty
    > email to modperl-subscribe@perl.apache.org.
    >
    >
    >
    >



    --
    Red Hot Penguin Consulting LLC
    mod_perl/PostgreSQL consulting and implementation
    http://www.redhotpenguin.com/


  2. Re: [mp2] make fails - `modperl_thx_interp_get' undeclared here (not in a function)

    Forget to reply to list....


    On Aug 28, 2008, at 4:20 PM, Charlie Reddington wrote:

    > I thought I was building mod_perl as static and apache to allow
    > dynamic modules as well. Is this where my confusion is coming in?
    >
    > Can't do dynamic, it has to be static as per the rules where I work.
    >
    > Thanks,
    >
    > Charlie
    >
    > On Aug 28, 2008, at 4:05 PM, Fred Moyer wrote:
    >
    >> Charlie Reddington wrote:
    >>> -------------8<---------- Start Bug Report ------------8<----------
    >>> 1. Problem Description:
    >>> I am trying to statically build mod_perl into apache. I start it
    >>> off by running the command.....
    >>> perl Makefile.PL MP_USE_STATIC=1 \ MP_AP_PREFIX=/home/charlier/
    >>> httpd-2.0.63 \ MP_AP_CONFIGURE="--prefix=/usr/local/apache-2.0.63
    >>> --enable-ssl --enable-rewrite --enable-so --with-included-apr --
    >>> enable-cgi"

    >>
    >> You are passing options to build both as a static module and as a
    >> shared object. The error below was seen about a week ago:
    >>
    >> http://www.gossamer-threads.com/list...erp_get;#97894
    >>
    >> Suggest rebuilding without MP_USE_STATIC=1 and just building the .so
    >>
    >>> This seems to go well and doesn't throw any red flags. From here I
    >>> run 'make'. It goes and fails with the following lines. Throughout
    >>> the make process everything else seems fine.
    >>> cc -I/home/charlier/mod_perl-2.0.4/src/modules/perl -I/home/
    >>> charlier/mod_perl-2.0.4/xs -I/home/charlier/httpd-2.0.63/include -
    >>> I/home/charlier/httpd-2.0.63/srclib/apr/include -I/home/charlier/
    >>> httpd-2.0.63/srclib/apr-util/include -I/home/charlier/httpd-2.0.63/
    >>> os/unix -fno-strict-aliasing -pipe -Wdeclaration-after-statement -
    >>> I/usr/local/include -I/usr/include/gdbm -I/usr/local/lib/
    >>> perl5/5.8.8/x86_64-linux/CORE -DMOD_PERL -DMP_COMPAT_1X -O2 -c
    >>> modperl_exports.c
    >>> modperl_exports.c:1169: error: `modperl_thx_interp_get' undeclared
    >>> here (not in a function)
    >>> modperl_exports.c:1173: error: `modperl_thx_interp_set' undeclared
    >>> here (not in a function)
    >>> make[1]: *** [modperl_exports.o] Error 1
    >>> make[1]: Leaving directory `/home/charlier/mod_perl-2.0.4/src/
    >>> modules/perl'
    >>> make: *** [modperl_lib] Error 2
    >>> I have tried with the current version of mod-perl and the latest.
    >>> I get the same result every time.
    >>> I have also tried the following versions of apache - 2.0.63,
    >>> 2.2.6, 2.2.9 all fail with the similar message.
    >>> The only other thing to note is that perl was built with
    >>> ccflags='fPIC' but the rest is pretty much the accepted defaults
    >>> in regards to an x86_64 system.
    >>> 2. Used Components and their Configuration:
    >>> *** mod_perl version 2.000004
    >>> *** using /home/charlier/mod_perl-2.0.4/lib/Apache2/BuildConfig.pm
    >>> *** Makefile.PL options:
    >>> MP_APR_LIB => aprext
    >>> MP_AP_CONFIGURE => --prefix=/usr/local/apache-2.0.63 --enable-ssl
    >>> --enable-rewrite --enable-so --with-included-apr --enable-cgi
    >>> MP_AP_PREFIX => /home/charlier/httpd-2.0.63
    >>> MP_COMPAT_1X => 1
    >>> MP_GENERATE_XS => 1
    >>> MP_LIBNAME => mod_perl
    >>> MP_USE_STATIC => 1
    >>> *** The httpd binary was not found
    >>> *** (apr|apu)-config linking info
    >>> -L/home/charlier/httpd-2.0.63/srclib/apr-util/.libs
    >>> -L/home/charlier/httpd-2.0.63/srclib/apr-util -laprutil-0 -lexpat
    >>> -L/home/charlier/httpd-2.0.63/srclib/apr/.libs
    >>> -L/home/charlier/httpd-2.0.63/srclib/apr -lapr-0 -lrt -lm -lcrypt -
    >>> lnsl -lpthread -ldl
    >>> *** /usr/local/bin/perl5.8.8 -V
    >>> Summary of my perl5 (revision 5 version 8 subversion 8)
    >>> configuration:
    >>> Platform:
    >>> osname=linux, osvers=2.6.9-67.0.1.elsmp, archname=x86_64-linux
    >>> uname='linux serv45.services.cymru.com 2.6.9-67.0.1.elsmp #1 smp
    >>> fri nov 30 11:57:43 est 2007 x86_64 x86_64 x86_64 gnulinux '
    >>> config_args=''
    >>> hint=recommended, useposix=true, d_sigaction=define
    >>> usethreads=undef use5005threads=undef useithreads=undef
    >>> usemultiplicity=undef
    >>> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    >>> use64bitint=define use64bitall=define uselongdouble=undef
    >>> usemymalloc=n, bincompat5005=undef
    >>> Compiler:
    >>> cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-
    >>> after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -
    >>> D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    >>> optimize='-O2',
    >>> cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-
    >>> statement -I/usr/local/include -I/usr/include/gdbm'
    >>> ccversion='', gccversion='3.4.6 20060404 (Red Hat 3.4.6-9)',
    >>> gccosandvers=''
    >>> intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    >>> d_longlong=define, longlongsize=8, d_longdbl=define,
    >>> longdblsize=16
    >>> ivtype='long', ivsize=8, nvtype='double', nvsize=8,
    >>> Off_t='off_t', lseeksize=8
    >>> alignbytes=8, prototype=define
    >>> Linker and Libraries:
    >>> ld='cc', ldflags =' -L/usr/local/lib'
    >>> libpth=/usr/local/lib /lib /usr/lib
    >>> libs=-lnsl -ldl -lm -lcrypt -lutil -lc
    >>> perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    >>> libc=/lib/libc-2.3.4.so, so=so, useshrplib=false,
    >>> libperl=libperl.a
    >>> gnulibc_version='2.3.4'
    >>> Dynamic Linking:
    >>> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    >>> cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
    >>> Characteristics of this binary (from libperl):
    >>> Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
    >>> USE_LARGE_FILES USE_PERLIO
    >>> Built under linux
    >>> Compiled at Aug 28 2008 16:56:21
    >>> %ENV:
    >>> PERL_LWP_USE_HTTP_10="1"
    >>> @INC:
    >>> /usr/local/lib/perl5/5.8.8/x86_64-linux
    >>> /usr/local/lib/perl5/5.8.8
    >>> /usr/local/lib/perl5/site_perl/5.8.8/x86_64-linux
    >>> /usr/local/lib/perl5/site_perl/5.8.8
    >>> /usr/local/lib/perl5/site_perl
    >>> .
    >>> *** Packages of interest status:
    >>> Apache2 : -
    >>> Apache2::Request : -
    >>> CGI : 3.15
    >>> ExtUtils::MakeMaker: 6.30
    >>> LWP : -
    >>> mod_perl : -
    >>> mod_perl2 : -
    >>> 3. This is the core dump trace: (if you get a core dump):
    >>> [CORE TRACE COMES HERE]
    >>> This report was generated by ./REPORT on Thu Aug 28 20:34:21 2008
    >>> GMT.
    >>> -------------8<---------- End Bug Report --------------8<----------
    >>> Note: Complete the rest of the details and post this bug report to
    >>> modperl perl.apache.org. To subscribe to the list send an empty
    >>> email to modperl-subscribe@perl.apache.org.

    >>
    >>
    >> --
    >> Red Hot Penguin Consulting LLC
    >> mod_perl/PostgreSQL consulting and implementation
    >> http://www.redhotpenguin.com/

    >



  3. Re: [mp2] make fails - `modperl_thx_interp_get' undeclared here (notin a function)

    Charlie Reddington wrote:
    > On Aug 28, 2008, at 4:20 PM, Charlie Reddington wrote:
    >
    >> I thought I was building mod_perl as static and apache to allow
    >> dynamic modules as well. Is this where my confusion is coming in?


    No you're right there - I missed that detail. I just tried a static
    build on my laptop with the parameters you posted and hit some other APR
    issues [1] so I haven't been able to replicate this and maybe take a
    hopeless swing at fixing it I might be able to try later on a linux box.

    >> Can't do dynamic, it has to be static as per the rules where I work.


    Most of the linux distributions I have seen recently (including OS X)
    build almost all modules dynamically except for the prefork/mpm worker
    modules. In my experience, building modules dynamically is "easier"
    than trying to do a giant static build with lots of modules. I remember
    the days of trying to configure apache 1.3 with mod_perl, mod_php, etc.
    build in and shudder - .so's are imho so much easier to build and maintain.


    [1]
    Configuring Apache/2.0.63 mod_perl/2.0.5-dev Perl/v5.8.8
    Can't find apr include/ directory,
    use MP_APR_CONFIG=/path/to/apr-config

    >>
    >> Thanks,
    >>
    >> Charlie
    >>
    >> On Aug 28, 2008, at 4:05 PM, Fred Moyer wrote:
    >>
    >>> Charlie Reddington wrote:
    >>>> -------------8<---------- Start Bug Report ------------8<----------
    >>>> 1. Problem Description:
    >>>> I am trying to statically build mod_perl into apache. I start it off
    >>>> by running the command.....
    >>>> perl Makefile.PL MP_USE_STATIC=1 \
    >>>> MP_AP_PREFIX=/home/charlier/httpd-2.0.63 \
    >>>> MP_AP_CONFIGURE="--prefix=/usr/local/apache-2.0.63 --enable-ssl
    >>>> --enable-rewrite --enable-so --with-included-apr --enable-cgi"
    >>>
    >>> You are passing options to build both as a static module and as a
    >>> shared object. The error below was seen about a week ago:
    >>>
    >>> http://www.gossamer-threads.com/list...erp_get;#97894
    >>>
    >>>
    >>> Suggest rebuilding without MP_USE_STATIC=1 and just building the .so
    >>>
    >>>> This seems to go well and doesn't throw any red flags. From here I
    >>>> run 'make'. It goes and fails with the following lines. Throughout
    >>>> the make process everything else seems fine.
    >>>> cc -I/home/charlier/mod_perl-2.0.4/src/modules/perl
    >>>> -I/home/charlier/mod_perl-2.0.4/xs
    >>>> -I/home/charlier/httpd-2.0.63/include
    >>>> -I/home/charlier/httpd-2.0.63/srclib/apr/include
    >>>> -I/home/charlier/httpd-2.0.63/srclib/apr-util/include
    >>>> -I/home/charlier/httpd-2.0.63/os/unix -fno-strict-aliasing -pipe
    >>>> -Wdeclaration-after-statement -I/usr/local/include
    >>>> -I/usr/include/gdbm -I/usr/local/lib/perl5/5.8.8/x86_64-linux/CORE
    >>>> -DMOD_PERL -DMP_COMPAT_1X -O2 -c modperl_exports.c
    >>>> modperl_exports.c:1169: error: `modperl_thx_interp_get' undeclared
    >>>> here (not in a function)
    >>>> modperl_exports.c:1173: error: `modperl_thx_interp_set' undeclared
    >>>> here (not in a function)
    >>>> make[1]: *** [modperl_exports.o] Error 1
    >>>> make[1]: Leaving directory
    >>>> `/home/charlier/mod_perl-2.0.4/src/modules/perl'
    >>>> make: *** [modperl_lib] Error 2
    >>>> I have tried with the current version of mod-perl and the latest. I
    >>>> get the same result every time.
    >>>> I have also tried the following versions of apache - 2.0.63, 2.2.6,
    >>>> 2.2.9 all fail with the similar message.
    >>>> The only other thing to note is that perl was built with
    >>>> ccflags='fPIC' but the rest is pretty much the accepted defaults in
    >>>> regards to an x86_64 system.
    >>>> 2. Used Components and their Configuration:
    >>>> *** mod_perl version 2.000004
    >>>> *** using /home/charlier/mod_perl-2.0.4/lib/Apache2/BuildConfig.pm
    >>>> *** Makefile.PL options:
    >>>> MP_APR_LIB => aprext
    >>>> MP_AP_CONFIGURE => --prefix=/usr/local/apache-2.0.63 --enable-ssl
    >>>> --enable-rewrite --enable-so --with-included-apr --enable-cgi
    >>>> MP_AP_PREFIX => /home/charlier/httpd-2.0.63
    >>>> MP_COMPAT_1X => 1
    >>>> MP_GENERATE_XS => 1
    >>>> MP_LIBNAME => mod_perl
    >>>> MP_USE_STATIC => 1
    >>>> *** The httpd binary was not found
    >>>> *** (apr|apu)-config linking info
    >>>> -L/home/charlier/httpd-2.0.63/srclib/apr-util/.libs
    >>>> -L/home/charlier/httpd-2.0.63/srclib/apr-util -laprutil-0 -lexpat
    >>>> -L/home/charlier/httpd-2.0.63/srclib/apr/.libs
    >>>> -L/home/charlier/httpd-2.0.63/srclib/apr -lapr-0 -lrt -lm -lcrypt
    >>>> -lnsl -lpthread -ldl
    >>>> *** /usr/local/bin/perl5.8.8 -V
    >>>> Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
    >>>> Platform:
    >>>> osname=linux, osvers=2.6.9-67.0.1.elsmp, archname=x86_64-linux
    >>>> uname='linux serv45.services.cymru.com 2.6.9-67.0.1.elsmp #1 smp
    >>>> fri nov 30 11:57:43 est 2007 x86_64 x86_64 x86_64 gnulinux '
    >>>> config_args=''
    >>>> hint=recommended, useposix=true, d_sigaction=define
    >>>> usethreads=undef use5005threads=undef useithreads=undef
    >>>> usemultiplicity=undef
    >>>> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    >>>> use64bitint=define use64bitall=define uselongdouble=undef
    >>>> usemymalloc=n, bincompat5005=undef
    >>>> Compiler:
    >>>> cc='cc', ccflags ='-fno-strict-aliasing -pipe
    >>>> -Wdeclaration-after-statement -I/usr/local/include
    >>>> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    >>>> optimize='-O2',
    >>>> cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement
    >>>> -I/usr/local/include -I/usr/include/gdbm'
    >>>> ccversion='', gccversion='3.4.6 20060404 (Red Hat 3.4.6-9)',
    >>>> gccosandvers=''
    >>>> intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    >>>> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    >>>> ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
    >>>> lseeksize=8
    >>>> alignbytes=8, prototype=define
    >>>> Linker and Libraries:
    >>>> ld='cc', ldflags =' -L/usr/local/lib'
    >>>> libpth=/usr/local/lib /lib /usr/lib
    >>>> libs=-lnsl -ldl -lm -lcrypt -lutil -lc
    >>>> perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    >>>> libc=/lib/libc-2.3.4.so, so=so, useshrplib=false, libperl=libperl.a
    >>>> gnulibc_version='2.3.4'
    >>>> Dynamic Linking:
    >>>> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    >>>> cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
    >>>> Characteristics of this binary (from libperl):
    >>>> Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
    >>>> USE_LARGE_FILES USE_PERLIO
    >>>> Built under linux
    >>>> Compiled at Aug 28 2008 16:56:21
    >>>> %ENV:
    >>>> PERL_LWP_USE_HTTP_10="1"
    >>>> @INC:
    >>>> /usr/local/lib/perl5/5.8.8/x86_64-linux
    >>>> /usr/local/lib/perl5/5.8.8
    >>>> /usr/local/lib/perl5/site_perl/5.8.8/x86_64-linux
    >>>> /usr/local/lib/perl5/site_perl/5.8.8
    >>>> /usr/local/lib/perl5/site_perl
    >>>> .
    >>>> *** Packages of interest status:
    >>>> Apache2 : -
    >>>> Apache2::Request : -
    >>>> CGI : 3.15
    >>>> ExtUtils::MakeMaker: 6.30
    >>>> LWP : -
    >>>> mod_perl : -
    >>>> mod_perl2 : -
    >>>> 3. This is the core dump trace: (if you get a core dump):
    >>>> [CORE TRACE COMES HERE]
    >>>> This report was generated by ./REPORT on Thu Aug 28 20:34:21 2008 GMT.
    >>>> -------------8<---------- End Bug Report --------------8<----------
    >>>> Note: Complete the rest of the details and post this bug report to
    >>>> modperl perl.apache.org. To subscribe to the list send an empty
    >>>> email to modperl-subscribe@perl.apache.org.
    >>>



  4. Re: [mp2] make fails - `modperl_thx_interp_get' undeclared here (not in a function)

    I'm going to start guessing that this is an issue with perl 5.8.8. I
    was trying to stick with updated versions of everything but I
    eventually said screw it and tried it with perl 5.8.5. Which allowed
    everything to compile right away......

    So I guess I'm good to go though it's not exactly how I'd like it done.

    Charlie

    On Aug 28, 2008, at 5:37 PM, Fred Moyer wrote:

    > Charlie Reddington wrote:
    >> On Aug 28, 2008, at 4:20 PM, Charlie Reddington wrote:
    >>> I thought I was building mod_perl as static and apache to allow
    >>> dynamic modules as well. Is this where my confusion is coming in?

    >
    > No you're right there - I missed that detail. I just tried a static
    > build on my laptop with the parameters you posted and hit some other
    > APR issues [1] so I haven't been able to replicate this and maybe
    > take a hopeless swing at fixing it I might be able to try later
    > on a linux box.
    >
    >>> Can't do dynamic, it has to be static as per the rules where I work.

    >
    > Most of the linux distributions I have seen recently (including OS
    > X) build almost all modules dynamically except for the prefork/mpm
    > worker modules. In my experience, building modules dynamically is
    > "easier" than trying to do a giant static build with lots of
    > modules. I remember the days of trying to configure apache 1.3 with
    > mod_perl, mod_php, etc. build in and shudder - .so's are imho so
    > much easier to build and maintain.
    >
    >
    > [1]
    > Configuring Apache/2.0.63 mod_perl/2.0.5-dev Perl/v5.8.8
    > Can't find apr include/ directory,
    > use MP_APR_CONFIG=/path/to/apr-config
    >
    >>>
    >>> Thanks,
    >>>
    >>> Charlie
    >>>
    >>> On Aug 28, 2008, at 4:05 PM, Fred Moyer wrote:
    >>>
    >>>> Charlie Reddington wrote:
    >>>>> -------------8<---------- Start Bug Report
    >>>>> ------------8<----------
    >>>>> 1. Problem Description:
    >>>>> I am trying to statically build mod_perl into apache. I start it
    >>>>> off by running the command.....
    >>>>> perl Makefile.PL MP_USE_STATIC=1 \ MP_AP_PREFIX=/home/charlier/
    >>>>> httpd-2.0.63 \ MP_AP_CONFIGURE="--prefix=/usr/local/
    >>>>> apache-2.0.63 --enable-ssl --enable-rewrite --enable-so --with-
    >>>>> included-apr --enable-cgi"
    >>>>
    >>>> You are passing options to build both as a static module and as a
    >>>> shared object. The error below was seen about a week ago:
    >>>>
    >>>> http://www.gossamer-threads.com/list...erp_get;#97894
    >>>>
    >>>> Suggest rebuilding without MP_USE_STATIC=1 and just building
    >>>> the .so
    >>>>
    >>>>> This seems to go well and doesn't throw any red flags. From here
    >>>>> I run 'make'. It goes and fails with the following lines.
    >>>>> Throughout the make process everything else seems fine.
    >>>>> cc -I/home/charlier/mod_perl-2.0.4/src/modules/perl -I/home/
    >>>>> charlier/mod_perl-2.0.4/xs -I/home/charlier/httpd-2.0.63/include
    >>>>> -I/home/charlier/httpd-2.0.63/srclib/apr/include -I/home/
    >>>>> charlier/httpd-2.0.63/srclib/apr-util/include -I/home/charlier/
    >>>>> httpd-2.0.63/os/unix -fno-strict-aliasing -pipe -Wdeclaration-
    >>>>> after-statement -I/usr/local/include -I/usr/include/gdbm -I/usr/
    >>>>> local/lib/perl5/5.8.8/x86_64-linux/CORE -DMOD_PERL -
    >>>>> DMP_COMPAT_1X -O2 -c modperl_exports.c
    >>>>> modperl_exports.c:1169: error: `modperl_thx_interp_get'
    >>>>> undeclared here (not in a function)
    >>>>> modperl_exports.c:1173: error: `modperl_thx_interp_set'
    >>>>> undeclared here (not in a function)
    >>>>> make[1]: *** [modperl_exports.o] Error 1
    >>>>> make[1]: Leaving directory `/home/charlier/mod_perl-2.0.4/src/
    >>>>> modules/perl'
    >>>>> make: *** [modperl_lib] Error 2
    >>>>> I have tried with the current version of mod-perl and the
    >>>>> latest. I get the same result every time.
    >>>>> I have also tried the following versions of apache - 2.0.63,
    >>>>> 2.2.6, 2.2.9 all fail with the similar message.
    >>>>> The only other thing to note is that perl was built with
    >>>>> ccflags='fPIC' but the rest is pretty much the accepted defaults
    >>>>> in regards to an x86_64 system.
    >>>>> 2. Used Components and their Configuration:
    >>>>> *** mod_perl version 2.000004
    >>>>> *** using /home/charlier/mod_perl-2.0.4/lib/Apache2/BuildConfig.pm
    >>>>> *** Makefile.PL options:
    >>>>> MP_APR_LIB => aprext
    >>>>> MP_AP_CONFIGURE => --prefix=/usr/local/apache-2.0.63 --enable-
    >>>>> ssl --enable-rewrite --enable-so --with-included-apr --enable-cgi
    >>>>> MP_AP_PREFIX => /home/charlier/httpd-2.0.63
    >>>>> MP_COMPAT_1X => 1
    >>>>> MP_GENERATE_XS => 1
    >>>>> MP_LIBNAME => mod_perl
    >>>>> MP_USE_STATIC => 1
    >>>>> *** The httpd binary was not found
    >>>>> *** (apr|apu)-config linking info
    >>>>> -L/home/charlier/httpd-2.0.63/srclib/apr-util/.libs
    >>>>> -L/home/charlier/httpd-2.0.63/srclib/apr-util -laprutil-0 -lexpat
    >>>>> -L/home/charlier/httpd-2.0.63/srclib/apr/.libs
    >>>>> -L/home/charlier/httpd-2.0.63/srclib/apr -lapr-0 -lrt -lm -
    >>>>> lcrypt -lnsl -lpthread -ldl
    >>>>> *** /usr/local/bin/perl5.8.8 -V
    >>>>> Summary of my perl5 (revision 5 version 8 subversion 8)
    >>>>> configuration:
    >>>>> Platform:
    >>>>> osname=linux, osvers=2.6.9-67.0.1.elsmp, archname=x86_64-linux
    >>>>> uname='linux serv45.services.cymru.com 2.6.9-67.0.1.elsmp #1
    >>>>> smp fri nov 30 11:57:43 est 2007 x86_64 x86_64 x86_64 gnulinux '
    >>>>> config_args=''
    >>>>> hint=recommended, useposix=true, d_sigaction=define
    >>>>> usethreads=undef use5005threads=undef useithreads=undef
    >>>>> usemultiplicity=undef
    >>>>> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    >>>>> use64bitint=define use64bitall=define uselongdouble=undef
    >>>>> usemymalloc=n, bincompat5005=undef
    >>>>> Compiler:
    >>>>> cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-
    >>>>> after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -
    >>>>> D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    >>>>> optimize='-O2',
    >>>>> cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-
    >>>>> statement -I/usr/local/include -I/usr/include/gdbm'
    >>>>> ccversion='', gccversion='3.4.6 20060404 (Red Hat 3.4.6-9)',
    >>>>> gccosandvers=''
    >>>>> intsize=4, longsize=8, ptrsize=8, doublesize=8,
    >>>>> byteorder=12345678
    >>>>> d_longlong=define, longlongsize=8, d_longdbl=define,
    >>>>> longdblsize=16
    >>>>> ivtype='long', ivsize=8, nvtype='double', nvsize=8,
    >>>>> Off_t='off_t', lseeksize=8
    >>>>> alignbytes=8, prototype=define
    >>>>> Linker and Libraries:
    >>>>> ld='cc', ldflags =' -L/usr/local/lib'
    >>>>> libpth=/usr/local/lib /lib /usr/lib
    >>>>> libs=-lnsl -ldl -lm -lcrypt -lutil -lc
    >>>>> perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    >>>>> libc=/lib/libc-2.3.4.so, so=so, useshrplib=false,
    >>>>> libperl=libperl.a
    >>>>> gnulibc_version='2.3.4'
    >>>>> Dynamic Linking:
    >>>>> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    >>>>> cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
    >>>>> Characteristics of this binary (from libperl):
    >>>>> Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL
    >>>>> USE_64_BIT_INT
    >>>>> USE_LARGE_FILES USE_PERLIO
    >>>>> Built under linux
    >>>>> Compiled at Aug 28 2008 16:56:21
    >>>>> %ENV:
    >>>>> PERL_LWP_USE_HTTP_10="1"
    >>>>> @INC:
    >>>>> /usr/local/lib/perl5/5.8.8/x86_64-linux
    >>>>> /usr/local/lib/perl5/5.8.8
    >>>>> /usr/local/lib/perl5/site_perl/5.8.8/x86_64-linux
    >>>>> /usr/local/lib/perl5/site_perl/5.8.8
    >>>>> /usr/local/lib/perl5/site_perl
    >>>>> .
    >>>>> *** Packages of interest status:
    >>>>> Apache2 : -
    >>>>> Apache2::Request : -
    >>>>> CGI : 3.15
    >>>>> ExtUtils::MakeMaker: 6.30
    >>>>> LWP : -
    >>>>> mod_perl : -
    >>>>> mod_perl2 : -
    >>>>> 3. This is the core dump trace: (if you get a core dump):
    >>>>> [CORE TRACE COMES HERE]
    >>>>> This report was generated by ./REPORT on Thu Aug 28 20:34:21
    >>>>> 2008 GMT.
    >>>>> -------------8<---------- End Bug Report
    >>>>> --------------8<----------
    >>>>> Note: Complete the rest of the details and post this bug report to
    >>>>> modperl perl.apache.org. To subscribe to the list send an
    >>>>> empty
    >>>>> email to modperl-subscribe@perl.apache.org.
    >>>>

    >



+ Reply to Thread