loop-Aes mount problem HELP ;\ - Linux

This is a discussion on loop-Aes mount problem HELP ;\ - Linux ; Hi I have just updated FC4 to FC5 and my problems begin. I can't mount partition. I have compiled linux-2.6.16.1 kernel with CONFIG_BLK_DEV_LOOP = n I've installed loop-AES-v3.1c.tar.bz2 and util-linux-2.12r.tar.gz patched. Everything seems to be ok [root@fox src]# uname -r ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: loop-Aes mount problem HELP ;\

  1. loop-Aes mount problem HELP ;\


    Hi
    I have just updated FC4 to FC5 and my problems begin.
    I can't mount partition.

    I have compiled linux-2.6.16.1 kernel with CONFIG_BLK_DEV_LOOP = n
    I've installed loop-AES-v3.1c.tar.bz2 and util-linux-2.12r.tar.gz patched.
    Everything seems to be ok

    [root@fox src]# uname -r
    2.6.16.1

    [root@fox loop-AES-v3.1c]# make tests
    ....
    md5sum test-file1 >test-file2
    echo "e12fd55fbae9fc0e03517593e253e239 test-file1" | cmp test-file2 -
    cmp test-file3 test-file4
    make[1]: Leaving directory `/usr/src/loop-AES-v3.1c'
    rm -f -r test-file[1234] test-dir1
    *** Test results ok ***


    --- fstab ----------------
    /dev/hda4 /mnt/szyfr ext2
    defaults,noauto,user,loop=/dev/loop0,encryption=AES128,gpgkey=/home/keyfile.gpg
    0 0
    --- fstab ----------------

    Unfortunately when I make

    [root@fox loop-AES-v3.1c]# mount /mnt/szyfr/
    Password:
    mount: wrong fs type, bad option, bad superblock on /dev/loop0,
    missing codepage or other error
    In some cases useful info is found in syslog - try
    dmesg | tail or so

    Password is ok I'm sure.

    What is wrong ?
    Have I forgotten about something?


    regards
    vr


  2. Re: loop-Aes mount problem HELP ;\

    vr wrote:
    >
    > Hi
    > I have just updated FC4 to FC5 and my problems begin.
    > I can't mount partition.
    >
    > I have compiled linux-2.6.16.1 kernel with CONFIG_BLK_DEV_LOOP = n
    > I've installed loop-AES-v3.1c.tar.bz2 and util-linux-2.12r.tar.gz patched.
    > Everything seems to be ok
    >
    > [root@fox src]# uname -r
    > 2.6.16.1
    >
    > [root@fox loop-AES-v3.1c]# make tests
    > ...
    > md5sum test-file1 >test-file2
    > echo "e12fd55fbae9fc0e03517593e253e239 test-file1" | cmp test-file2 -
    > cmp test-file3 test-file4
    > make[1]: Leaving directory `/usr/src/loop-AES-v3.1c'
    > rm -f -r test-file[1234] test-dir1
    > *** Test results ok ***
    >
    >
    > --- fstab ----------------
    > /dev/hda4 /mnt/szyfr ext2
    > defaults,noauto,user,loop=/dev/loop0,encryption=AES128,gpgkey=/home/keyfile.gpg
    > 0 0
    > --- fstab ----------------
    >
    > Unfortunately when I make
    >
    > [root@fox loop-AES-v3.1c]# mount /mnt/szyfr/
    > Password:
    > mount: wrong fs type, bad option, bad superblock on /dev/loop0,
    > missing codepage or other error
    > In some cases useful info is found in syslog - try
    > dmesg | tail or so
    >
    > Password is ok I'm sure.
    >
    > What is wrong ?
    > Have I forgotten about something?


    A module you need to load, perhaps?

    --
    -bill davidsen (davidsen@tmr.com)
    "The secret to procrastination is to put things off until the
    last possible moment - but no longer" -me

  3. Re: loop-Aes mount problem HELP ;\

    Bill Davidsen wrote:
    > vr wrote:
    >
    >>
    >> Hi
    >> I have just updated FC4 to FC5 and my problems begin.
    >> I can't mount partition.
    >>
    >> I have compiled linux-2.6.16.1 kernel with CONFIG_BLK_DEV_LOOP = n
    >> I've installed loop-AES-v3.1c.tar.bz2 and util-linux-2.12r.tar.gz
    >> patched.
    >> Everything seems to be ok
    >>
    >> [root@fox src]# uname -r
    >> 2.6.16.1
    >>
    >> [root@fox loop-AES-v3.1c]# make tests
    >> ...
    >> md5sum test-file1 >test-file2
    >> echo "e12fd55fbae9fc0e03517593e253e239 test-file1" | cmp test-file2 -
    >> cmp test-file3 test-file4
    >> make[1]: Leaving directory `/usr/src/loop-AES-v3.1c'
    >> rm -f -r test-file[1234] test-dir1
    >> *** Test results ok ***
    >>
    >>
    >> --- fstab ----------------
    >> /dev/hda4 /mnt/szyfr ext2
    >> defaults,noauto,user,loop=/dev/loop0,encryption=AES128,gpgkey=/home/keyfile.gpg
    >> 0 0
    >> --- fstab ----------------
    >>
    >> Unfortunately when I make
    >>
    >> [root@fox loop-AES-v3.1c]# mount /mnt/szyfr/
    >> Password:
    >> mount: wrong fs type, bad option, bad superblock on /dev/loop0,
    >> missing codepage or other error
    >> In some cases useful info is found in syslog - try
    >> dmesg | tail or so
    >>
    >> Password is ok I'm sure.
    >>
    >> What is wrong ?
    >> Have I forgotten about something?

    >
    >
    > A module you need to load, perhaps?
    >


    In some cases useful info is found in syslog - try "dmesg | tail" or so

+ Reply to Thread