Is there a way how to setup external USB ISDN device (such types of devices
usually people call ISDN TA)?

And how?
My model is Elcon NT1+Multi USB ISDN TA device.

I think that device is like standard modem but it works on USB (it works
with AT command).
I tried with acm and /dev/usb/ttyACM0 and ttyACM1 but don't work with
redhat-config-network.

Usually that types of devices have both RS232 and USB ports, but mine have
not (my telephone provider asked manufactured to deliver devices without
RS232 ((.

So, now I have real problem to configure Linux ((.

Please help.
Thanks in advance, Mladen.


Below is some data from scanModem
-------------- System information ------------------------
redhat Red Hat Linux release 9 (Shrike)
on System with processor: i686
supported by kernel: 2.4.20-8
assembled with compiler: 3.2.2
with current System compiler GCC=3.2.2
COMM services are not active

redhat is not yet providing pre-compiled drivers for WinModems

An AC'97 modem codec was not detected

Path to lspci is: /sbin/lspci
--------- lspci scan ----------------
PCI_bus
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev
03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97
Audio Controller (rev 50)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440
AGP 8x] (rev a4)
-------------------------------------

A modem was not detected among the above PCI devices.
This indicates that the modem, if present has a non-standard or ISA bridge.
Please follow the directions in ModemData.txt.2 for identifying the modem
properties
when booting under Microsoft Windows. Also access any documentation sources
on yourchipset. Guidance can only be provided AFTER
the chipset and/or its drivers have been identified.

======= PCI_ID checking completed ======
Update=2004 April 2
The following information blocks just query some ppp support items.
================================================== ==
grep ppp /etc/modules.conf
-------------------------------------

-------------------------------------
Be sure to read the section about ppp related modules and aliases in
ModemData.txt.2
DEVPPP=crw------- 1 root root 108, 0 Jan 31 2003 /dev/ppp
A /dev/modem symbolic link is not present

No devfsd.conf file found, indicated absense of the devfsd daemon package
for device file system (devfs) symbolic link support.

DEVFSD=
---- dmesg queries -------
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)

The ModemDriverCompiling.txt is a MUST READ,
if you are not experienced in configuring kernel-source/
or get "unresolved symbols" upon driver insertion.

Most recent WinModem fixes are in:
http://linmodems.technion.ac.il/FAQ.html