[PATCH 0/5] Various hwmon patches - Kernel

This is a discussion on [PATCH 0/5] Various hwmon patches - Kernel ; Hi all, Here are a myriad of hwmon patches that I've been working on. Please have a look and let me know what you think. - New driver: adt7462 - Automatic loading for i5k-amb driver - adt7470/adt7473: Check input values ...

+ Reply to Thread
Results 1 to 19 of 19

Thread: [PATCH 0/5] Various hwmon patches

  1. [PATCH 0/5] Various hwmon patches

    Hi all,

    Here are a myriad of hwmon patches that I've been working on. Please have a
    look and let me know what you think.

    - New driver: adt7462
    - Automatic loading for i5k-amb driver
    - adt7470/adt7473: Check input values from sysfs
    - lm85: Add adt7468 support

    --D
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  2. [PATCH 5/5] lm85: Support adt7468 chips


    The adt7468 is a follow-on to the adt7463, so plumb in adt7468 support along
    the same code paths.

    Signed-off-by: Darrick J. Wong
    ---

    drivers/hwmon/lm85.c | 52 ++++++++++++++++++++++++++++++++++++++++++++------
    1 files changed, 46 insertions(+), 6 deletions(-)

    diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
    index 3ff0285..cfc1ee9 100644
    --- a/drivers/hwmon/lm85.c
    +++ b/drivers/hwmon/lm85.c
    @@ -39,7 +39,8 @@
    static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };

    /* Insmod parameters */
    -I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
    +I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100,
    + emc6d102);

    /* The LM85 registers */

    @@ -59,6 +60,12 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);

    #define LM85_REG_COMPANY 0x3e
    #define LM85_REG_VERSTEP 0x3f
    +
    +#define ADT7468_REG_CFG5 0x7c
    +#define ADT7468_OFF64 0x01
    +#define IS_ADT7468_OFF64(data) \
    + ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
    +
    /* These are the recognized values for the above regs */
    #define LM85_COMPANY_NATIONAL 0x01
    #define LM85_COMPANY_ANALOG_DEV 0x41
    @@ -70,6 +77,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
    #define LM85_VERSTEP_ADM1027 0x60
    #define LM85_VERSTEP_ADT7463 0x62
    #define LM85_VERSTEP_ADT7463C 0x6A
    +#define LM85_VERSTEP_ADT7468_1 0x71
    +#define LM85_VERSTEP_ADT7468_2 0x72
    #define LM85_VERSTEP_EMC6D100_A0 0x60
    #define LM85_VERSTEP_EMC6D100_A1 0x61
    #define LM85_VERSTEP_EMC6D102 0x65
    @@ -306,6 +315,7 @@ struct lm85_data {
    u8 vid; /* Register value */
    u8 vrm; /* VRM version */
    u32 alarms; /* Register encoding, combined */
    + u8 cfg5; /* Config Register 5 on ADT7468 */
    struct lm85_autofan autofan[3];
    struct lm85_zone zone[3];
    };
    @@ -685,6 +695,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
    struct lm85_data *data = i2c_get_clientdata(client);
    long val = simple_strtol(buf, NULL, 10);

    + if (IS_ADT7468_OFF64(data))
    + val += 64;
    +
    mutex_lock(&data->update_lock);
    data->temp_min[nr] = TEMP_TO_REG(val);
    lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
    @@ -708,6 +721,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
    struct lm85_data *data = i2c_get_clientdata(client);
    long val = simple_strtol(buf, NULL, 10);

    + if (IS_ADT7468_OFF64(data))
    + val += 64;
    +
    mutex_lock(&data->update_lock);
    data->temp_max[nr] = TEMP_TO_REG(val);
    lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
    @@ -1163,6 +1179,10 @@ static int lm85_detect(struct i2c_client *client, int kind,
    case LM85_VERSTEP_ADT7463C:
    kind = adt7463;
    break;
    + case LM85_VERSTEP_ADT7468_1:
    + case LM85_VERSTEP_ADT7468_2:
    + kind = adt7468;
    + break;
    }
    } else if (company == LM85_COMPANY_SMSC) {
    switch (verstep) {
    @@ -1195,6 +1215,9 @@ static int lm85_detect(struct i2c_client *client, int kind,
    case adt7463:
    type_name = "adt7463";
    break;
    + case adt7468:
    + type_name = "adt7468";
    + break;
    case emc6d100:
    type_name = "emc6d100";
    break;
    @@ -1246,10 +1269,11 @@ static int lm85_probe(struct i2c_client *client,
    if (err)
    goto err_kfree;

    - /* The ADT7463 has an optional VRM 10 mode where pin 21 is used
    + /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
    as a sixth digital VID input rather than an analog input. */
    data->vid = lm85_read_value(client, LM85_REG_VID);
    - if (!(data->type == adt7463 && (data->vid & 0x80)))
    + if (!((data->type == adt7463 || data->type == adt7468) &&
    + (data->vid & 0x80)))
    if ((err = sysfs_create_group(&client->dev.kobj,
    &lm85_group_in4)))
    goto err_remove_files;
    @@ -1357,7 +1381,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
    * There are 2 additional resolution bits per channel and we
    * have room for 4, so we shift them to the left.
    */
    - if (data->type == adm1027 || data->type == adt7463) {
    + if (data->type == adm1027 || data->type == adt7463 ||
    + data->type == adt7468) {
    int ext1 = lm85_read_value(client,
    ADM1027_REG_EXTEND_ADC1);
    int ext2 = lm85_read_value(client,
    @@ -1382,16 +1407,23 @@ static struct lm85_data *lm85_update_device(struct device *dev)
    lm85_read_value(client, LM85_REG_FAN(i));
    }

    - if (!(data->type == adt7463 && (data->vid & 0x80))) {
    + if (!((data->type == adt7463 || data->type == adt7468) &&
    + (data->vid & 0x80))) {
    data->in[4] = lm85_read_value(client,
    LM85_REG_IN(4));
    }

    + if (data->type == adt7468)
    + data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
    +
    for (i = 0; i <= 2; ++i) {
    data->temp[i] =
    lm85_read_value(client, LM85_REG_TEMP(i));
    data->pwm[i] =
    lm85_read_value(client, LM85_REG_PWM(i));
    +
    + if (IS_ADT7468_OFF64(data))
    + data->temp[i] -= 64;
    }

    data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
    @@ -1446,7 +1478,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
    lm85_read_value(client, LM85_REG_FAN_MIN(i));
    }

    - if (!(data->type == adt7463 && (data->vid & 0x80))) {
    + if (!((data->type == adt7463 || data->type == adt7468) &&
    + (data->vid & 0x80))) {
    data->in_min[4] = lm85_read_value(client,
    LM85_REG_IN_MIN(4));
    data->in_max[4] = lm85_read_value(client,
    @@ -1481,6 +1514,13 @@ static struct lm85_data *lm85_update_device(struct device *dev)
    lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
    data->zone[i].critical =
    lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
    +
    + if (IS_ADT7468_OFF64(data)) {
    + data->temp_min[i] -= 64;
    + data->temp_max[i] -= 64;
    + data->zone[i].limit -= 64;
    + data->zone[i].critical -= 64;
    + }
    }

    i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  3. [PATCH 2/5] i5k_amb: Load automatically on all 5000/5400 chipsets


    It turns out that we cannot create a pci_driver in this driver because PCI will
    not call this module's probe function if the i5000-edac driver is already
    loaded. That said, we only want one value (AMBASE) from the PCI config space.
    Neither driver alters this value, so it's safe to read it. However, we still
    want the module aliases, so provide that.

    Signed-off-by: Darrick J. Wong
    ---

    drivers/hwmon/i5k_amb.c | 8 ++++++++
    1 files changed, 8 insertions(+), 0 deletions(-)

    diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
    index 2ede938..a3fa639 100644
    --- a/drivers/hwmon/i5k_amb.c
    +++ b/drivers/hwmon/i5k_amb.c
    @@ -490,6 +490,14 @@ static unsigned long chipset_ids[] = {
    0
    };

    +static struct pci_device_id i5k_amb_ids[] __devinitdata = {
    + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
    + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
    + { 0, },
    +};
    +
    +MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
    +
    static int __devinit i5k_amb_probe(struct platform_device *pdev)
    {
    struct i5k_amb_data *data;

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  4. [PATCH 3/5] adt7470: Check input range when sysfs files are written


    Implement correct rounding and range checking for adt7470.

    Signed-off-by: Darrick J. Wong
    ---

    drivers/hwmon/adt7470.c | 75 +++++++++++++++++++++++++++++++++++++++--------
    1 files changed, 62 insertions(+), 13 deletions(-)

    diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
    index d368d8f..1311a59 100644
    --- a/drivers/hwmon/adt7470.c
    +++ b/drivers/hwmon/adt7470.c
    @@ -137,6 +137,8 @@ I2C_CLIENT_INSMOD_1(adt7470);
    #define FAN_PERIOD_INVALID 65535
    #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)

    +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))
    +
    struct adt7470_data {
    struct device *hwmon_dev;
    struct attribute_group attrs;
    @@ -353,7 +355,13 @@ static ssize_t set_temp_min(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10) / 1000;
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = ROUND_DIV(temp, 1000);
    + temp = SENSORS_LIMIT(temp, 0, 255);

    mutex_lock(&data->lock);
    data->temp_min[attr->index] = temp;
    @@ -381,7 +389,13 @@ static ssize_t set_temp_max(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10) / 1000;
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = ROUND_DIV(temp, 1000);
    + temp = SENSORS_LIMIT(temp, 0, 255);

    mutex_lock(&data->lock);
    data->temp_max[attr->index] = temp;
    @@ -430,11 +444,13 @@ static ssize_t set_fan_max(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10);
    + long temp;

    - if (!temp)
    + if (strict_strtol(buf, 10, &temp) || !temp)
    return -EINVAL;
    +
    temp = FAN_RPM_TO_PERIOD(temp);
    + temp = SENSORS_LIMIT(temp, 1, 65534);

    mutex_lock(&data->lock);
    data->fan_max[attr->index] = temp;
    @@ -465,11 +481,13 @@ static ssize_t set_fan_min(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10);
    + long temp;

    - if (!temp)
    + if (strict_strtol(buf, 10, &temp) || !temp)
    return -EINVAL;
    +
    temp = FAN_RPM_TO_PERIOD(temp);
    + temp = SENSORS_LIMIT(temp, 1, 65534);

    mutex_lock(&data->lock);
    data->fan_min[attr->index] = temp;
    @@ -507,9 +525,12 @@ static ssize_t set_force_pwm_max(struct device *dev,
    {
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10);
    + long temp;
    u8 reg;

    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    mutex_lock(&data->lock);
    data->force_pwm_max = temp;
    reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
    @@ -537,7 +558,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = SENSORS_LIMIT(temp, 0, 255);

    mutex_lock(&data->lock);
    data->pwm[attr->index] = temp;
    @@ -564,7 +590,12 @@ static ssize_t set_pwm_max(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = SENSORS_LIMIT(temp, 0, 255);

    mutex_lock(&data->lock);
    data->pwm_max[attr->index] = temp;
    @@ -592,7 +623,12 @@ static ssize_t set_pwm_min(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = SENSORS_LIMIT(temp, 0, 255);

    mutex_lock(&data->lock);
    data->pwm_min[attr->index] = temp;
    @@ -630,7 +666,13 @@ static ssize_t set_pwm_tmin(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10) / 1000;
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = ROUND_DIV(temp, 1000);
    + temp = SENSORS_LIMIT(temp, 0, 255);

    mutex_lock(&data->lock);
    data->pwm_tmin[attr->index] = temp;
    @@ -658,11 +700,14 @@ static ssize_t set_pwm_auto(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = simple_strtol(buf, NULL, 10);
    int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index);
    int pwm_auto_reg_mask;
    + long temp;
    u8 reg;

    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    if (attr->index % 2)
    pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK;
    else
    @@ -716,10 +761,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev,
    struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    struct i2c_client *client = to_i2c_client(dev);
    struct adt7470_data *data = i2c_get_clientdata(client);
    - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10));
    int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index);
    + long temp;
    u8 reg;

    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = cvt_auto_temp(temp);
    if (temp < 0)
    return temp;


    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  5. [PATCH 1/5] adt7462: New hwmon driver


    New driver to play with. As Jean mentioned a couple of years ago, this
    chip is a beast with odd combinations of 8 fans, 4 temperatures, and
    13 voltage sensors. This driver has been tested on an IntelliStation
    Z30.

    Signed-off-by: Darrick J. Wong
    ---

    Documentation/hwmon/adt7462 | 67 +
    drivers/hwmon/Kconfig | 10
    drivers/hwmon/Makefile | 1
    drivers/hwmon/adt7462.c | 2002 +++++++++++++++++++++++++++++++++++++++++++
    4 files changed, 2080 insertions(+), 0 deletions(-)

    diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462
    new file mode 100644
    index 0000000..ec660b3
    --- /dev/null
    +++ b/Documentation/hwmon/adt7462
    @@ -0,0 +1,67 @@
    +Kernel driver adt7462
    +======================
    +
    +Supported chips:
    + * Analog Devices ADT7462
    + Prefix: 'adt7462'
    + Addresses scanned: I2C 0x58, 0x5C
    + Datasheet: Publicly available at the Analog Devices website
    +
    +Author: Darrick J. Wong
    +
    +Description
    +-----------
    +
    +This driver implements support for the Analog Devices ADT7462 chip family.
    +
    +This chip is a bit of a beast. It has 8 counters for measuring fan speed. It
    +can also measure 13 voltages or 4 temperatures, or various combinations of the
    +two. See the chip documentation for more details about the exact set of
    +configurations. This driver does not allow one to configure the chip; that is
    +left to the system designer.
    +
    +A sophisticated control system for the PWM outputs is designed into the ADT7462
    +that allows fan speed to be adjusted automatically based on any of the three
    +temperature sensors. Each PWM output is individually adjustable and
    +programmable. Once configured, the ADT7462 will adjust the PWM outputs in
    +response to the measured temperatures without further host intervention. This
    +feature can also be disabled for manual control of the PWM's.
    +
    +Each of the measured inputs (voltage, temperature, fan speed) has
    +corresponding high/low limit values. The ADT7462 will signal an ALARM if
    +any measured value exceeds either limit.
    +
    +The ADT7462 samples all inputs continuously. The driver will not read
    +the registers more often than once every other second. Further,
    +configuration data is only read once per minute.
    +
    +Special Features
    +----------------
    +
    +The ADT7462 have a 10-bit ADC and can therefore measure temperatures
    +with 0.25 degC resolution.
    +
    +The Analog Devices datasheet is very detailed and describes a procedure for
    +determining an optimal configuration for the automatic PWM control.
    +
    +The driver will report sensor labels when it is able to determine that
    +information from the configuration registers.
    +
    +Configuration Notes
    +-------------------
    +
    +Besides standard interfaces driver adds the following:
    +
    +* PWM Control
    +
    +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
    +* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
    +
    +point1: Set the pwm speed at a lower temperature bound.
    +point2: Set the pwm speed at a higher temperature bound.
    +
    +The ADT7462 will scale the pwm between the lower and higher pwm speed when
    +the temperature is between the two temperature boundaries. PWM values range
    +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the
    +temperature sensor associated with the PWM control exceeds temp#_max.
    +
    diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
    index 6de1e0f..f98f5e5 100644
    --- a/drivers/hwmon/Kconfig
    +++ b/drivers/hwmon/Kconfig
    @@ -159,6 +159,16 @@ config SENSORS_ADM9240
    This driver can also be built as a module. If so, the module
    will be called adm9240.

    +config SENSORS_ADT7462
    + tristate "Analog Devices ADT7462"
    + depends on I2C && EXPERIMENTAL
    + help
    + If you say yes here you get support for the Analog Devices
    + ADT7462 temperature monitoring chips.
    +
    + This driver can also be built as a module. If so, the module
    + will be called adt7462.
    +
    config SENSORS_ADT7470
    tristate "Analog Devices ADT7470"
    depends on I2C && EXPERIMENTAL
    diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
    index 042d5a7..be4c8dc 100644
    --- a/drivers/hwmon/Makefile
    +++ b/drivers/hwmon/Makefile
    @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o
    obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
    obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
    obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o
    +obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
    obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
    obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o
    obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
    diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
    new file mode 100644
    index 0000000..66107b4
    --- /dev/null
    +++ b/drivers/hwmon/adt7462.c
    @@ -0,0 +1,2002 @@
    +/*
    + * A hwmon driver for the Analog Devices ADT7462
    + * Copyright (C) 2008 IBM
    + *
    + * Author: Darrick J. Wong
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License as published by
    + * the Free Software Foundation; either version 2 of the License, or
    + * (at your option) any later version.
    + *
    + * This program is distributed in the hope that it will be useful,
    + * but WITHOUT ANY WARRANTY; without even the implied warranty of
    + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    + * GNU General Public License for more details.
    + *
    + * You should have received a copy of the GNU General Public License
    + * along with this program; if not, write to the Free Software
    + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    + */
    +
    +#include
    +#include
    +#include
    +#include
    +#include
    +#include
    +#include
    +#include
    +#include
    +
    +/* Addresses to scan */
    +static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END };
    +
    +/* Insmod parameters */
    +I2C_CLIENT_INSMOD_1(adt7462);
    +
    +/* ADT7462 registers */
    +#define ADT7462_REG_DEVICE 0x3D
    +#define ADT7462_REG_VENDOR 0x3E
    +#define ADT7462_REG_REVISION 0x3F
    +
    +#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44
    +#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47
    +#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48
    +#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B
    +#define ADT7462_REG_TEMP_BASE_ADDR 0x88
    +#define ADT7462_REG_TEMP_MAX_ADDR 0x8F
    +
    +#define ADT7462_REG_FAN_BASE_ADDR 0x98
    +#define ADT7462_REG_FAN_MAX_ADDR 0x9F
    +#define ADT7462_REG_FAN2_BASE_ADDR 0xA2
    +#define ADT7462_REG_FAN2_MAX_ADDR 0xA9
    +#define ADT7462_REG_FAN_ENABLE 0x07
    +#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78
    +#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F
    +
    +#define ADT7462_REG_CFG2 0x02
    +#define ADT7462_FSPD_MASK 0x20
    +
    +#define ADT7462_REG_PWM_BASE_ADDR 0xAA
    +#define ADT7462_REG_PWM_MAX_ADDR 0xAD
    +#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28
    +#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B
    +#define ADT7462_REG_PWM_MAX 0x2C
    +#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C
    +#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F
    +#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60
    +#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63
    +#define ADT7462_PWM_HYST_MASK 0x0F
    +#define ADT7462_PWM_RANGE_MASK 0xF0
    +#define ADT7462_PWM_RANGE_SHIFT 4
    +#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21
    +#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24
    +#define ADT7462_PWM_CHANNEL_MASK 0xE0
    +#define ADT7462_PWM_CHANNEL_SHIFT 5
    +
    +#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10
    +#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13
    +#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */
    +#define ADT7462_DIODE3_INPUT 0x20
    +#define ADT7462_DIODE1_INPUT 0x40
    +#define ADT7462_VID_INPUT 0x80
    +#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */
    +#define ADT7462_PIN21_INPUT 0x08
    +#define ADT7462_PIN19_INPUT 0x10
    +#define ADT7462_PIN15_INPUT 0x20
    +#define ADT7462_PIN13_INPUT 0x40
    +#define ADT7462_PIN8_INPUT 0x80
    +#define ADT7462_PIN23_MASK 0x03
    +#define ADT7462_PIN23_SHIFT 0
    +#define ADT7462_PIN26_MASK 0x0C /* cfg2 */
    +#define ADT7462_PIN26_SHIFT 2
    +#define ADT7462_PIN25_MASK 0x30
    +#define ADT7462_PIN25_SHIFT 4
    +#define ADT7462_PIN24_MASK 0xC0
    +#define ADT7462_PIN24_SHIFT 6
    +#define ADT7462_PIN26_VOLT_INPUT 0x08
    +#define ADT7462_PIN25_VOLT_INPUT 0x20
    +#define ADT7462_PIN28_SHIFT 6 /* cfg3 */
    +#define ADT7462_PIN28_VOLT 0x5
    +
    +#define ADT7462_REG_ALARM1 0xB8
    +#define ADT7462_LT_ALARM 0x02
    +#define ADT7462_R1T_ALARM 0x04
    +#define ADT7462_R2T_ALARM 0x08
    +#define ADT7462_R3T_ALARM 0x10
    +#define ADT7462_REG_ALARM2 0xBB
    +#define ADT7462_V0_ALARM 0x01
    +#define ADT7462_V1_ALARM 0x02
    +#define ADT7462_V2_ALARM 0x04
    +#define ADT7462_V3_ALARM 0x08
    +#define ADT7462_V4_ALARM 0x10
    +#define ADT7462_V5_ALARM 0x20
    +#define ADT7462_V6_ALARM 0x40
    +#define ADT7462_V7_ALARM 0x80
    +#define ADT7462_REG_ALARM3 0xBC
    +#define ADT7462_V8_ALARM 0x08
    +#define ADT7462_V9_ALARM 0x10
    +#define ADT7462_V10_ALARM 0x20
    +#define ADT7462_V11_ALARM 0x40
    +#define ADT7462_V12_ALARM 0x80
    +#define ADT7462_REG_ALARM4 0xBD
    +#define ADT7462_F0_ALARM 0x01
    +#define ADT7462_F1_ALARM 0x02
    +#define ADT7462_F2_ALARM 0x04
    +#define ADT7462_F3_ALARM 0x08
    +#define ADT7462_F4_ALARM 0x10
    +#define ADT7462_F5_ALARM 0x20
    +#define ADT7462_F6_ALARM 0x40
    +#define ADT7462_F7_ALARM 0x80
    +#define ADT7462_ALARM1 0x0000
    +#define ADT7462_ALARM2 0x0100
    +#define ADT7462_ALARM3 0x0200
    +#define ADT7462_ALARM4 0x0300
    +#define ADT7462_ALARM_REG_SHIFT 8
    +#define ADT7462_ALARM_FLAG_MASK 0x0F
    +
    +#define ADT7462_TEMP_COUNT 4
    +#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2))
    +#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x))
    +#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x))
    +#define TEMP_FRAC_OFFSET 6
    +
    +#define ADT7462_FAN_COUNT 8
    +#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x))
    +
    +#define ADT7462_PWM_COUNT 4
    +#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x))
    +#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x))
    +#define ADT7462_REG_PWM_TMIN(x) \
    + (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x))
    +#define ADT7462_REG_PWM_TRANGE(x) \
    + (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x))
    +
    +#define ADT7462_PIN_CFG_REG_COUNT 4
    +#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x))
    +#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x))
    +
    +#define ADT7462_ALARM_REG_COUNT 4
    +
    +/*
    + * The chip can measure 13 different voltage sources:
    + *
    + * 1. +12V1 (pin 7)
    + * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23)
    + * 3. +12V3 (pin 22)
    + * 4. +5V (pin 21)
    + * 5. +1.25V/+0.9V (pin 19)
    + * 6. +2.5V/+1.8V (pin 15)
    + * 7. +3.3v (pin 13)
    + * 8. +12V2 (pin 8)
    + * 9. Vbatt/FSB_Vtt (pin 26)
    + * A. +3.3V/+1.2V1 (pin 25)
    + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24)
    + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V)
    + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V)
    + *
    + * Each of these 13 has a factor to convert raw to voltage. Even better,
    + * the pins can be connected to other sensors (tach/gpio/hot/etc), which
    + * makes the bookkeeping tricky.
    + *
    + * Some, but not all, of these voltages have low/high limits.
    + */
    +#define ADT7462_VOLT_COUNT 12
    +
    +#define ADT7462_VENDOR 0x41
    +#define ADT7462_DEVICE 0x62
    +/* datasheet only mentions a revision 4 */
    +#define ADT7462_REVISION 0x04
    +
    +/* How often do we reread sensors values? (In jiffies) */
    +#define SENSOR_REFRESH_INTERVAL (2 * HZ)
    +
    +/* How often do we reread sensor limit values? (In jiffies) */
    +#define LIMIT_REFRESH_INTERVAL (60 * HZ)
    +
    +/* datasheet says to divide this number by the fan reading to get fan rpm */
    +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x))
    +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM
    +#define FAN_PERIOD_INVALID 65535
    +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
    +
    +#define MASK_AND_SHIFT(value, prefix) \
    + (((value) & prefix##_MASK) >> prefix##_SHIFT)
    +
    +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))
    +
    +struct adt7462_data {
    + struct device *hwmon_dev;
    + struct attribute_group attrs;
    + struct mutex lock;
    + char sensors_valid;
    + char limits_valid;
    + unsigned long sensors_last_updated; /* In jiffies */
    + unsigned long limits_last_updated; /* In jiffies */
    +
    + u8 temp[ADT7462_TEMP_COUNT];
    + /* bits 6-7 are quarter pieces of temp */
    + u8 temp_frac[ADT7462_TEMP_COUNT];
    + u8 temp_min[ADT7462_TEMP_COUNT];
    + u8 temp_max[ADT7462_TEMP_COUNT];
    + u16 fan[ADT7462_FAN_COUNT];
    + u8 fan_enabled;
    + u8 fan_min[ADT7462_FAN_COUNT];
    + u8 cfg2;
    + u8 pwm[ADT7462_PWM_COUNT];
    + u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT];
    + u8 voltages[ADT7462_VOLT_COUNT];
    + u8 volt_max[ADT7462_VOLT_COUNT];
    + u8 volt_min[ADT7462_VOLT_COUNT];
    + u8 pwm_min[ADT7462_PWM_COUNT];
    + u8 pwm_tmin[ADT7462_PWM_COUNT];
    + u8 pwm_trange[ADT7462_PWM_COUNT];
    + u8 pwm_max; /* only one per chip */
    + u8 pwm_cfg[ADT7462_PWM_COUNT];
    + u8 alarms[ADT7462_ALARM_REG_COUNT];
    +};
    +
    +static int adt7462_probe(struct i2c_client *client,
    + const struct i2c_device_id *id);
    +static int adt7462_detect(struct i2c_client *client, int kind,
    + struct i2c_board_info *info);
    +static int adt7462_remove(struct i2c_client *client);
    +
    +static const struct i2c_device_id adt7462_id[] = {
    + { "adt7462", adt7462 },
    + { }
    +};
    +MODULE_DEVICE_TABLE(i2c, adt7462_id);
    +
    +static struct i2c_driver adt7462_driver = {
    + .class = I2C_CLASS_HWMON,
    + .driver = {
    + .name = "adt7462",
    + },
    + .probe = adt7462_probe,
    + .remove = adt7462_remove,
    + .id_table = adt7462_id,
    + .detect = adt7462_detect,
    + .address_data = &addr_data,
    +};
    +
    +/*
    + * 16-bit registers on the ADT7462 are low-byte first. The data sheet says
    + * that the low byte must be read before the high byte.
    + */
    +static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg)
    +{
    + u16 foo;
    + foo = i2c_smbus_read_byte_data(client, reg);
    + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
    + return foo;
    +}
    +
    +/* For some reason these registers are not contiguous. */
    +static int ADT7462_REG_FAN(int fan)
    +{
    + if (fan < 4)
    + return ADT7462_REG_FAN_BASE_ADDR + (2 * fan);
    + return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4));
    +}
    +
    +/* Voltage registers are scattered everywhere */
    +static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which)
    +{
    + switch (which) {
    + case 0:
    + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
    + return 0x7C;
    + break;
    + case 1:
    + return 0x69;
    + case 2:
    + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
    + return 0x7F;
    + break;
    + case 3:
    + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
    + return 0x7E;
    + break;
    + case 4:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
    + return 0x4B;
    + break;
    + case 5:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
    + return 0x49;
    + break;
    + case 6:
    + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
    + return 0x68;
    + break;
    + case 7:
    + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
    + return 0x7D;
    + break;
    + case 8:
    + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
    + return 0x6C;
    + break;
    + case 9:
    + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
    + return 0x6B;
    + break;
    + case 10:
    + return 0x6A;
    + case 11:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return 0x50;
    + break;
    + case 12:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return 0x4C;
    + break;
    + }
    + return -ENODEV;
    +}
    +
    +static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which)
    +{
    + switch (which) {
    + case 0:
    + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
    + return 0x6D;
    + break;
    + case 1:
    + return 0x72;
    + case 2:
    + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
    + return 0x6F;
    + break;
    + case 3:
    + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
    + return 0x71;
    + break;
    + case 4:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
    + return 0x47;
    + break;
    + case 5:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
    + return 0x45;
    + break;
    + case 6:
    + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
    + return 0x70;
    + break;
    + case 7:
    + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
    + return 0x6E;
    + break;
    + case 8:
    + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
    + return 0x75;
    + break;
    + case 9:
    + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
    + return 0x74;
    + break;
    + case 10:
    + return 0x73;
    + case 11:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return 0x76;
    + break;
    + case 12:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return 0x77;
    + break;
    + }
    + return -ENODEV;
    +}
    +
    +static int ADT7462_REG_VOLT(struct adt7462_data *data, int which)
    +{
    + switch (which) {
    + case 0:
    + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
    + return 0xA3;
    + break;
    + case 1:
    + return 0x90;
    + case 2:
    + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
    + return 0xA9;
    + break;
    + case 3:
    + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
    + return 0xA7;
    + break;
    + case 4:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
    + return 0x8F;
    + break;
    + case 5:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
    + return 0x8B;
    + break;
    + case 6:
    + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
    + return 0x96;
    + break;
    + case 7:
    + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
    + return 0xA5;
    + break;
    + case 8:
    + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
    + return 0x93;
    + break;
    + case 9:
    + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
    + return 0x92;
    + break;
    + case 10:
    + return 0x91;
    + case 11:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return 0x94;
    + break;
    + case 12:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return 0x95;
    + break;
    + }
    + return -ENODEV;
    +}
    +
    +/* Provide labels for sysfs */
    +static const char *voltage_label(struct adt7462_data *data, int which)
    +{
    + switch (which) {
    + case 0:
    + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
    + return "+12V1";
    + break;
    + case 1:
    + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) {
    + case 0:
    + return "Vccp1";
    + case 1:
    + return "+2.5V";
    + case 2:
    + return "+1.8V";
    + case 3:
    + return "+1.5V";
    + }
    + case 2:
    + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
    + return "+12V3";
    + break;
    + case 3:
    + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
    + return "+5V";
    + break;
    + case 4:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) {
    + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
    + return "+0.9V";
    + return "+1.25V";
    + }
    + break;
    + case 5:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) {
    + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
    + return "+1.8V";
    + return "+2.5V";
    + }
    + break;
    + case 6:
    + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
    + return "+3.3V";
    + break;
    + case 7:
    + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
    + return "+12V2";
    + break;
    + case 8:
    + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) {
    + case 0:
    + return "Vbatt";
    + case 1:
    + return "FSB_Vtt";
    + }
    + break;
    + case 9:
    + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) {
    + case 0:
    + return "+3.3V";
    + case 1:
    + return "+1.2V1";
    + }
    + break;
    + case 10:
    + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) {
    + case 0:
    + return "Vccp2";
    + case 1:
    + return "+2.5V";
    + case 2:
    + return "+1.8V";
    + case 3:
    + return "+1.5";
    + }
    + case 11:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return "+1.5V ICH";
    + break;
    + case 12:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return "+1.5V 3GPIO";
    + break;
    + }
    + return "N/A";
    +}
    +
    +/* Multipliers are actually in uV, not mV. */
    +static int voltage_multiplier(struct adt7462_data *data, int which)
    +{
    + switch (which) {
    + case 0:
    + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
    + return 62500;
    + break;
    + case 1:
    + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) {
    + case 0:
    + if (data->pin_cfg[0] & ADT7462_VID_INPUT)
    + return 12500;
    + return 6250;
    + case 1:
    + return 13000;
    + case 2:
    + return 9400;
    + case 3:
    + return 7800;
    + }
    + case 2:
    + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
    + return 62500;
    + break;
    + case 3:
    + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
    + return 26000;
    + break;
    + case 4:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) {
    + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
    + return 4690;
    + return 6500;
    + }
    + break;
    + case 5:
    + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) {
    + if (data->pin_cfg[1] & ADT7462_PIN15_INPUT)
    + return 9400;
    + return 13000;
    + }
    + break;
    + case 6:
    + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
    + return 17200;
    + break;
    + case 7:
    + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
    + return 62500;
    + break;
    + case 8:
    + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) {
    + case 0:
    + return 15600;
    + case 1:
    + return 6250;
    + }
    + break;
    + case 9:
    + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) {
    + case 0:
    + return 17200;
    + case 1:
    + return 6250;
    + }
    + break;
    + case 10:
    + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) {
    + case 0:
    + return 6250;
    + case 1:
    + return 13000;
    + case 2:
    + return 9400;
    + case 3:
    + return 7800;
    + }
    + case 11:
    + case 12:
    + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
    + ADT7462_PIN28_VOLT &&
    + !(data->pin_cfg[0] & ADT7462_VID_INPUT))
    + return 7800;
    + }
    + return 0;
    +}
    +
    +static int temp_enabled(struct adt7462_data *data, int which)
    +{
    + switch (which) {
    + case 0:
    + case 2:
    + return 1;
    + case 1:
    + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT)
    + return 1;
    + break;
    + case 3:
    + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT)
    + return 1;
    + break;
    + }
    + return 0;
    +}
    +
    +static const char *temp_label(struct adt7462_data *data, int which)
    +{
    + switch (which) {
    + case 0:
    + return "local";
    + case 1:
    + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT)
    + return "remote1";
    + break;
    + case 2:
    + return "remote2";
    + case 3:
    + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT)
    + return "remote3";
    + break;
    + }
    + return "N/A";
    +}
    +
    +/* Map Trange register values to mC */
    +#define NUM_TRANGE_VALUES 16
    +static const int trange_values[NUM_TRANGE_VALUES] = {
    + 2000,
    + 2500,
    + 3300,
    + 4000,
    + 5000,
    + 6700,
    + 8000,
    + 10000,
    + 13300,
    + 16000,
    + 20000,
    + 26700,
    + 32000,
    + 40000,
    + 53300,
    + 80000
    +};
    +
    +static int find_trange_value(int trange)
    +{
    + int i;
    +
    + for (i = 0; i < NUM_TRANGE_VALUES; i++)
    + if (trange_values[i] == trange)
    + return i;
    +
    + return -ENODEV;
    +}
    +
    +static struct adt7462_data *adt7462_update_device(struct device *dev)
    +{
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + unsigned long local_jiffies = jiffies;
    + int i;
    +
    + mutex_lock(&data->lock);
    + if (time_before(local_jiffies, data->sensors_last_updated +
    + SENSOR_REFRESH_INTERVAL)
    + && data->sensors_valid)
    + goto no_sensor_update;
    +
    + for (i = 0; i < ADT7462_TEMP_COUNT; i++) {
    + /*
    + * Reading the fractional register locks the integral
    + * register until both have been read.
    + */
    + data->temp_frac[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_TEMP_REG(i));
    + data->temp[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_TEMP_REG(i) + 1);
    + }
    +
    + for (i = 0; i < ADT7462_FAN_COUNT; i++)
    + data->fan[i] = adt7462_read_word_data(client,
    + ADT7462_REG_FAN(i));
    +
    + data->fan_enabled = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_FAN_ENABLE);
    +
    + for (i = 0; i < ADT7462_PWM_COUNT; i++)
    + data->pwm[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_PWM(i));
    +
    + for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++)
    + data->pin_cfg[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_PIN_CFG(i));
    +
    + for (i = 0; i < ADT7462_VOLT_COUNT; i++) {
    + int reg = ADT7462_REG_VOLT(data, i);
    + if (!reg)
    + data->voltages[i] = 0;
    + else
    + data->voltages[i] = i2c_smbus_read_byte_data(client,
    + reg);
    + }
    +
    + data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1);
    + data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2);
    + data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3);
    + data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4);
    +
    + data->sensors_last_updated = local_jiffies;
    + data->sensors_valid = 1;
    +
    +no_sensor_update:
    + if (time_before(local_jiffies, data->limits_last_updated +
    + LIMIT_REFRESH_INTERVAL)
    + && data->limits_valid)
    + goto out;
    +
    + for (i = 0; i < ADT7462_TEMP_COUNT; i++) {
    + data->temp_min[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_TEMP_MIN_REG(i));
    + data->temp_max[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_TEMP_MAX_REG(i));
    + }
    +
    + for (i = 0; i < ADT7462_FAN_COUNT; i++)
    + data->fan_min[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_FAN_MIN(i));
    +
    + for (i = 0; i < ADT7462_VOLT_COUNT; i++) {
    + int reg = ADT7462_REG_VOLT_MAX(data, i);
    + data->volt_max[i] =
    + (reg ? i2c_smbus_read_byte_data(client, reg) : 0);
    +
    + reg = ADT7462_REG_VOLT_MIN(data, i);
    + data->volt_min[i] =
    + (reg ? i2c_smbus_read_byte_data(client, reg) : 0);
    + }
    +
    + for (i = 0; i < ADT7462_PWM_COUNT; i++) {
    + data->pwm_min[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_PWM_MIN(i));
    + data->pwm_tmin[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_PWM_TMIN(i));
    + data->pwm_trange[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_PWM_TRANGE(i));
    + data->pwm_cfg[i] = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_PWM_CFG(i));
    + }
    +
    + data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX);
    +
    + data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2);
    +
    + data->limits_last_updated = local_jiffies;
    + data->limits_valid = 1;
    +
    +out:
    + mutex_unlock(&data->lock);
    + return data;
    +}
    +
    +static ssize_t show_temp_min(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    +
    + if (!temp_enabled(data, attr->index))
    + return sprintf(buf, "0\n");
    +
    + return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64));
    +}
    +
    +static ssize_t set_temp_min(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index))
    + return -EINVAL;
    +
    + temp = ROUND_DIV(temp, 1000) + 64;
    + temp = SENSORS_LIMIT(temp, 0, 255);
    +
    + mutex_lock(&data->lock);
    + data->temp_min[attr->index] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_temp_max(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    +
    + if (!temp_enabled(data, attr->index))
    + return sprintf(buf, "0\n");
    +
    + return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64));
    +}
    +
    +static ssize_t set_temp_max(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index))
    + return -EINVAL;
    +
    + temp = ROUND_DIV(temp, 1000) + 64;
    + temp = SENSORS_LIMIT(temp, 0, 255);
    +
    + mutex_lock(&data->lock);
    + data->temp_max[attr->index] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET;
    +
    + if (!temp_enabled(data, attr->index))
    + return sprintf(buf, "0\n");
    +
    + return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) +
    + 250 * frac);
    +}
    +
    +static ssize_t show_temp_label(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    +
    + return sprintf(buf, "%s\n", temp_label(data, attr->index));
    +}
    +
    +static ssize_t show_volt_max(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + int x = voltage_multiplier(data, attr->index);
    +
    + x *= data->volt_max[attr->index];
    + x /= 1000; /* convert from uV to mV */
    +
    + return sprintf(buf, "%d\n", x);
    +}
    +
    +static ssize_t set_volt_max(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + int x = voltage_multiplier(data, attr->index);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp) || !x)
    + return -EINVAL;
    +
    + temp *= 1000; /* convert mV to uV */
    + temp = ROUND_DIV(temp, x);
    + temp = SENSORS_LIMIT(temp, 0, 255);
    +
    + mutex_lock(&data->lock);
    + data->volt_max[attr->index] = temp;
    + i2c_smbus_write_byte_data(client,
    + ADT7462_REG_VOLT_MAX(data, attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_volt_min(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + int x = voltage_multiplier(data, attr->index);
    +
    + x *= data->volt_min[attr->index];
    + x /= 1000; /* convert from uV to mV */
    +
    + return sprintf(buf, "%d\n", x);
    +}
    +
    +static ssize_t set_volt_min(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + int x = voltage_multiplier(data, attr->index);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp) || !x)
    + return -EINVAL;
    +
    + temp *= 1000; /* convert mV to uV */
    + temp = ROUND_DIV(temp, x);
    + temp = SENSORS_LIMIT(temp, 0, 255);
    +
    + mutex_lock(&data->lock);
    + data->volt_min[attr->index] = temp;
    + i2c_smbus_write_byte_data(client,
    + ADT7462_REG_VOLT_MIN(data, attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_voltage(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + int x = voltage_multiplier(data, attr->index);
    +
    + x *= data->voltages[attr->index];
    + x /= 1000; /* convert from uV to mV */
    +
    + return sprintf(buf, "%d\n", x);
    +}
    +
    +static ssize_t show_voltage_label(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    +
    + return sprintf(buf, "%s\n", voltage_label(data, attr->index));
    +}
    +
    +static ssize_t show_alarm(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + int reg = attr->index >> ADT7462_ALARM_REG_SHIFT;
    + int mask = attr->index & ADT7462_ALARM_FLAG_MASK;
    +
    + if (data->alarms[reg] & mask)
    + return sprintf(buf, "1\n");
    + else
    + return sprintf(buf, "0\n");
    +}
    +
    +static int fan_enabled(struct adt7462_data *data, int fan)
    +{
    + return data->fan_enabled & (1 << fan);
    +}
    +
    +static ssize_t show_fan_min(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + u16 temp;
    +
    + /* Only the MSB of the min fan period is stored... */
    + temp = data->fan_min[attr->index];
    + temp <<= 8;
    +
    + if (!fan_enabled(data, attr->index) ||
    + !FAN_DATA_VALID(temp))
    + return sprintf(buf, "0\n");
    +
    + return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp));
    +}
    +
    +static ssize_t set_fan_min(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf, size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp) || !temp ||
    + !fan_enabled(data, attr->index))
    + return -EINVAL;
    +
    + temp = FAN_RPM_TO_PERIOD(temp);
    + temp >>= 8;
    + temp = SENSORS_LIMIT(temp, 1, 255);
    +
    + mutex_lock(&data->lock);
    + data->fan_min[attr->index] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    +
    + if (!fan_enabled(data, attr->index) ||
    + !FAN_DATA_VALID(data->fan[attr->index]))
    + return sprintf(buf, "0\n");
    +
    + return sprintf(buf, "%d\n",
    + FAN_PERIOD_TO_RPM(data->fan[attr->index]));
    +}
    +
    +static ssize_t show_force_pwm_max(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct adt7462_data *data = adt7462_update_device(dev);
    + return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0));
    +}
    +
    +static ssize_t set_force_pwm_max(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    + u8 reg;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + mutex_lock(&data->lock);
    + reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2);
    + if (temp)
    + reg |= ADT7462_FSPD_MASK;
    + else
    + reg &= ~ADT7462_FSPD_MASK;
    + data->cfg2 = reg;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + return sprintf(buf, "%d\n", data->pwm[attr->index]);
    +}
    +
    +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
    + const char *buf, size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = SENSORS_LIMIT(temp, 0, 255);
    +
    + mutex_lock(&data->lock);
    + data->pwm[attr->index] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_pwm_max(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct adt7462_data *data = adt7462_update_device(dev);
    + return sprintf(buf, "%d\n", data->pwm_max);
    +}
    +
    +static ssize_t set_pwm_max(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = SENSORS_LIMIT(temp, 0, 255);
    +
    + mutex_lock(&data->lock);
    + data->pwm_max = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_pwm_min(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
    +}
    +
    +static ssize_t set_pwm_min(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = SENSORS_LIMIT(temp, 0, 255);
    +
    + mutex_lock(&data->lock);
    + data->pwm_min[attr->index] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_pwm_hyst(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + return sprintf(buf, "%d\n", 1000 *
    + (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK));
    +}
    +
    +static ssize_t set_pwm_hyst(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = ROUND_DIV(temp, 1000);
    + temp = SENSORS_LIMIT(temp, 0, 15);
    +
    + /* package things up */
    + temp &= ADT7462_PWM_HYST_MASK;
    + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK;
    +
    + mutex_lock(&data->lock);
    + data->pwm_trange[attr->index] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_pwm_tmax(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    +
    + /* tmax = tmin + trange */
    + int trange = trange_values[data->pwm_trange[attr->index] >>
    + ADT7462_PWM_RANGE_SHIFT];
    + int tmin = (data->pwm_tmin[attr->index] - 64) * 1000;
    +
    + return sprintf(buf, "%d\n", tmin + trange);
    +}
    +
    +static ssize_t set_pwm_tmax(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + int temp;
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + int tmin, trange_value;
    + long trange;
    +
    + if (strict_strtol(buf, 10, &trange))
    + return -EINVAL;
    +
    + /* trange = tmax - tmin */
    + tmin = (data->pwm_tmin[attr->index] - 64) * 1000;
    + trange_value = find_trange_value(trange - tmin);
    +
    + if (trange_value < 0)
    + return -EINVAL;
    +
    + temp = trange_value << ADT7462_PWM_RANGE_SHIFT;
    + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK;
    +
    + mutex_lock(&data->lock);
    + data->pwm_trange[attr->index] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_pwm_tmin(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64));
    +}
    +
    +static ssize_t set_pwm_tmin(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = ROUND_DIV(temp, 1000) + 64;
    + temp = SENSORS_LIMIT(temp, 0, 255);
    +
    + mutex_lock(&data->lock);
    + data->pwm_tmin[attr->index] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index),
    + temp);
    + mutex_unlock(&data->lock);
    +
    + return count;
    +}
    +
    +static ssize_t show_pwm_auto(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT;
    +
    + switch (cfg) {
    + case 4: /* off */
    + return sprintf(buf, "0\n");
    + case 7: /* manual */
    + return sprintf(buf, "1\n");
    + default: /* automatic */
    + return sprintf(buf, "2\n");
    + }
    +}
    +
    +static void set_pwm_channel(struct i2c_client *client,
    + struct adt7462_data *data,
    + int which,
    + int value)
    +{
    + int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK;
    + temp |= value << ADT7462_PWM_CHANNEL_SHIFT;
    +
    + mutex_lock(&data->lock);
    + data->pwm_cfg[which] = temp;
    + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp);
    + mutex_unlock(&data->lock);
    +}
    +
    +static ssize_t set_pwm_auto(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + switch (temp) {
    + case 0: /* off */
    + set_pwm_channel(client, data, attr->index, 4);
    + return count;
    + case 1: /* manual */
    + set_pwm_channel(client, data, attr->index, 7);
    + return count;
    + default:
    + return -EINVAL;
    + }
    +}
    +
    +static ssize_t show_pwm_auto_temp(struct device *dev,
    + struct device_attribute *devattr,
    + char *buf)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct adt7462_data *data = adt7462_update_device(dev);
    + int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT;
    +
    + switch (channel) {
    + case 0: /* temp[1234] only */
    + case 1:
    + case 2:
    + case 3:
    + return sprintf(buf, "%d\n", (1 << channel));
    + case 5: /* temp1 & temp4 */
    + return sprintf(buf, "9\n");
    + case 6:
    + return sprintf(buf, "15\n");
    + default:
    + return sprintf(buf, "0\n");
    + }
    +}
    +
    +static int cvt_auto_temp(int input)
    +{
    + if (input == 0xF)
    + return 6;
    + if (input == 0x9)
    + return 5;
    + if (input < 1 || !is_power_of_2(input))
    + return -EINVAL;
    + return ilog2(input);
    +}
    +
    +static ssize_t set_pwm_auto_temp(struct device *dev,
    + struct device_attribute *devattr,
    + const char *buf,
    + size_t count)
    +{
    + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    + struct i2c_client *client = to_i2c_client(dev);
    + struct adt7462_data *data = i2c_get_clientdata(client);
    + long temp;
    +
    + if (strict_strtol(buf, 10, &temp))
    + return -EINVAL;
    +
    + temp = cvt_auto_temp(temp);
    + if (temp < 0)
    + return temp;
    +
    + set_pwm_channel(client, data, attr->index, temp);
    +
    + return count;
    +}
    +
    +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
    + set_temp_max, 0);
    +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
    + set_temp_max, 1);
    +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max,
    + set_temp_max, 2);
    +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max,
    + set_temp_max, 3);
    +
    +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
    + set_temp_min, 0);
    +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
    + set_temp_min, 1);
    +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min,
    + set_temp_min, 2);
    +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min,
    + set_temp_min, 3);
    +
    +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
    +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
    +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
    +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
    +
    +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0);
    +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1);
    +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2);
    +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3);
    +
    +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM1 | ADT7462_LT_ALARM);
    +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM1 | ADT7462_R1T_ALARM);
    +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM1 | ADT7462_R2T_ALARM);
    +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM1 | ADT7462_R3T_ALARM);
    +
    +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 0);
    +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 1);
    +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 2);
    +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 3);
    +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 4);
    +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 5);
    +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 6);
    +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 7);
    +static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 8);
    +static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 9);
    +static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 10);
    +static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 11);
    +static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max,
    + set_volt_max, 12);
    +
    +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 0);
    +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 1);
    +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 2);
    +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 3);
    +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 4);
    +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 5);
    +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 6);
    +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 7);
    +static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 8);
    +static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 9);
    +static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 10);
    +static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 11);
    +static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min,
    + set_volt_min, 12);
    +
    +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0);
    +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1);
    +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2);
    +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3);
    +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4);
    +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5);
    +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6);
    +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7);
    +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8);
    +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9);
    +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10);
    +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11);
    +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12);
    +
    +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0);
    +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1);
    +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2);
    +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3);
    +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4);
    +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5);
    +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6);
    +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7);
    +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8);
    +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9);
    +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10);
    +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11);
    +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12);
    +
    +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM2 | ADT7462_V0_ALARM);
    +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM2 | ADT7462_V7_ALARM);
    +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM2 | ADT7462_V2_ALARM);
    +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM2 | ADT7462_V6_ALARM);
    +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM2 | ADT7462_V5_ALARM);
    +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM2 | ADT7462_V4_ALARM);
    +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM2 | ADT7462_V3_ALARM);
    +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM2 | ADT7462_V1_ALARM);
    +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM3 | ADT7462_V10_ALARM);
    +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM3 | ADT7462_V9_ALARM);
    +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM3 | ADT7462_V8_ALARM);
    +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM3 | ADT7462_V11_ALARM);
    +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM3 | ADT7462_V12_ALARM);
    +
    +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
    + set_fan_min, 0);
    +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
    + set_fan_min, 1);
    +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
    + set_fan_min, 2);
    +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
    + set_fan_min, 3);
    +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min,
    + set_fan_min, 4);
    +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min,
    + set_fan_min, 5);
    +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min,
    + set_fan_min, 6);
    +static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min,
    + set_fan_min, 7);
    +
    +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
    +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
    +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
    +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
    +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4);
    +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5);
    +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6);
    +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7);
    +
    +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM4 | ADT7462_F0_ALARM);
    +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM4 | ADT7462_F1_ALARM);
    +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM4 | ADT7462_F2_ALARM);
    +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM4 | ADT7462_F3_ALARM);
    +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM4 | ADT7462_F4_ALARM);
    +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM4 | ADT7462_F5_ALARM);
    +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM4 | ADT7462_F6_ALARM);
    +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL,
    + ADT7462_ALARM4 | ADT7462_F7_ALARM);
    +
    +static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO,
    + show_force_pwm_max, set_force_pwm_max, 0);
    +
    +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
    +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
    +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
    +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3);
    +
    +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
    + show_pwm_min, set_pwm_min, 0);
    +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
    + show_pwm_min, set_pwm_min, 1);
    +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
    + show_pwm_min, set_pwm_min, 2);
    +static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO,
    + show_pwm_min, set_pwm_min, 3);
    +
    +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
    + show_pwm_max, set_pwm_max, 0);
    +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
    + show_pwm_max, set_pwm_max, 1);
    +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
    + show_pwm_max, set_pwm_max, 2);
    +static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO,
    + show_pwm_max, set_pwm_max, 3);
    +
    +static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO,
    + show_pwm_hyst, set_pwm_hyst, 0);
    +static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO,
    + show_pwm_hyst, set_pwm_hyst, 1);
    +static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO,
    + show_pwm_hyst, set_pwm_hyst, 2);
    +static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO,
    + show_pwm_hyst, set_pwm_hyst, 3);
    +
    +static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO,
    + show_pwm_hyst, set_pwm_hyst, 0);
    +static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO,
    + show_pwm_hyst, set_pwm_hyst, 1);
    +static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO,
    + show_pwm_hyst, set_pwm_hyst, 2);
    +static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO,
    + show_pwm_hyst, set_pwm_hyst, 3);
    +
    +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO,
    + show_pwm_tmin, set_pwm_tmin, 0);
    +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
    + show_pwm_tmin, set_pwm_tmin, 1);
    +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO,
    + show_pwm_tmin, set_pwm_tmin, 2);
    +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO,
    + show_pwm_tmin, set_pwm_tmin, 3);
    +
    +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
    + show_pwm_tmax, set_pwm_tmax, 0);
    +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
    + show_pwm_tmax, set_pwm_tmax, 1);
    +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO,
    + show_pwm_tmax, set_pwm_tmax, 2);
    +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO,
    + show_pwm_tmax, set_pwm_tmax, 3);
    +
    +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
    + set_pwm_auto, 0);
    +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
    + set_pwm_auto, 1);
    +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
    + set_pwm_auto, 2);
    +static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
    + set_pwm_auto, 3);
    +
    +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO,
    + show_pwm_auto_temp, set_pwm_auto_temp, 0);
    +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO,
    + show_pwm_auto_temp, set_pwm_auto_temp, 1);
    +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO,
    + show_pwm_auto_temp, set_pwm_auto_temp, 2);
    +static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO,
    + show_pwm_auto_temp, set_pwm_auto_temp, 3);
    +
    +static struct attribute *adt7462_attr[] =
    +{
    + &sensor_dev_attr_temp1_max.dev_attr.attr,
    + &sensor_dev_attr_temp2_max.dev_attr.attr,
    + &sensor_dev_attr_temp3_max.dev_attr.attr,
    + &sensor_dev_attr_temp4_max.dev_attr.attr,
    +
    + &sensor_dev_attr_temp1_min.dev_attr.attr,
    + &sensor_dev_attr_temp2_min.dev_attr.attr,
    + &sensor_dev_attr_temp3_min.dev_attr.attr,
    + &sensor_dev_attr_temp4_min.dev_attr.attr,
    +
    + &sensor_dev_attr_temp1_input.dev_attr.attr,
    + &sensor_dev_attr_temp2_input.dev_attr.attr,
    + &sensor_dev_attr_temp3_input.dev_attr.attr,
    + &sensor_dev_attr_temp4_input.dev_attr.attr,
    +
    + &sensor_dev_attr_temp1_label.dev_attr.attr,
    + &sensor_dev_attr_temp2_label.dev_attr.attr,
    + &sensor_dev_attr_temp3_label.dev_attr.attr,
    + &sensor_dev_attr_temp4_label.dev_attr.attr,
    +
    + &sensor_dev_attr_temp1_alarm.dev_attr.attr,
    + &sensor_dev_attr_temp2_alarm.dev_attr.attr,
    + &sensor_dev_attr_temp3_alarm.dev_attr.attr,
    + &sensor_dev_attr_temp4_alarm.dev_attr.attr,
    +
    + &sensor_dev_attr_in1_max.dev_attr.attr,
    + &sensor_dev_attr_in2_max.dev_attr.attr,
    + &sensor_dev_attr_in3_max.dev_attr.attr,
    + &sensor_dev_attr_in4_max.dev_attr.attr,
    + &sensor_dev_attr_in5_max.dev_attr.attr,
    + &sensor_dev_attr_in6_max.dev_attr.attr,
    + &sensor_dev_attr_in7_max.dev_attr.attr,
    + &sensor_dev_attr_in8_max.dev_attr.attr,
    + &sensor_dev_attr_in9_max.dev_attr.attr,
    + &sensor_dev_attr_in10_max.dev_attr.attr,
    + &sensor_dev_attr_in11_max.dev_attr.attr,
    + &sensor_dev_attr_in12_max.dev_attr.attr,
    + &sensor_dev_attr_in13_max.dev_attr.attr,
    +
    + &sensor_dev_attr_in1_min.dev_attr.attr,
    + &sensor_dev_attr_in2_min.dev_attr.attr,
    + &sensor_dev_attr_in3_min.dev_attr.attr,
    + &sensor_dev_attr_in4_min.dev_attr.attr,
    + &sensor_dev_attr_in5_min.dev_attr.attr,
    + &sensor_dev_attr_in6_min.dev_attr.attr,
    + &sensor_dev_attr_in7_min.dev_attr.attr,
    + &sensor_dev_attr_in8_min.dev_attr.attr,
    + &sensor_dev_attr_in9_min.dev_attr.attr,
    + &sensor_dev_attr_in10_min.dev_attr.attr,
    + &sensor_dev_attr_in11_min.dev_attr.attr,
    + &sensor_dev_attr_in12_min.dev_attr.attr,
    + &sensor_dev_attr_in13_min.dev_attr.attr,
    +
    + &sensor_dev_attr_in1_input.dev_attr.attr,
    + &sensor_dev_attr_in2_input.dev_attr.attr,
    + &sensor_dev_attr_in3_input.dev_attr.attr,
    + &sensor_dev_attr_in4_input.dev_attr.attr,
    + &sensor_dev_attr_in5_input.dev_attr.attr,
    + &sensor_dev_attr_in6_input.dev_attr.attr,
    + &sensor_dev_attr_in7_input.dev_attr.attr,
    + &sensor_dev_attr_in8_input.dev_attr.attr,
    + &sensor_dev_attr_in9_input.dev_attr.attr,
    + &sensor_dev_attr_in10_input.dev_attr.attr,
    + &sensor_dev_attr_in11_input.dev_attr.attr,
    + &sensor_dev_attr_in12_input.dev_attr.attr,
    + &sensor_dev_attr_in13_input.dev_attr.attr,
    +
    + &sensor_dev_attr_in1_label.dev_attr.attr,
    + &sensor_dev_attr_in2_label.dev_attr.attr,
    + &sensor_dev_attr_in3_label.dev_attr.attr,
    + &sensor_dev_attr_in4_label.dev_attr.attr,
    + &sensor_dev_attr_in5_label.dev_attr.attr,
    + &sensor_dev_attr_in6_label.dev_attr.attr,
    + &sensor_dev_attr_in7_label.dev_attr.attr,
    + &sensor_dev_attr_in8_label.dev_attr.attr,
    + &sensor_dev_attr_in9_label.dev_attr.attr,
    + &sensor_dev_attr_in10_label.dev_attr.attr,
    + &sensor_dev_attr_in11_label.dev_attr.attr,
    + &sensor_dev_attr_in12_label.dev_attr.attr,
    + &sensor_dev_attr_in13_label.dev_attr.attr,
    +
    + &sensor_dev_attr_in1_alarm.dev_attr.attr,
    + &sensor_dev_attr_in2_alarm.dev_attr.attr,
    + &sensor_dev_attr_in3_alarm.dev_attr.attr,
    + &sensor_dev_attr_in4_alarm.dev_attr.attr,
    + &sensor_dev_attr_in5_alarm.dev_attr.attr,
    + &sensor_dev_attr_in6_alarm.dev_attr.attr,
    + &sensor_dev_attr_in7_alarm.dev_attr.attr,
    + &sensor_dev_attr_in8_alarm.dev_attr.attr,
    + &sensor_dev_attr_in9_alarm.dev_attr.attr,
    + &sensor_dev_attr_in10_alarm.dev_attr.attr,
    + &sensor_dev_attr_in11_alarm.dev_attr.attr,
    + &sensor_dev_attr_in12_alarm.dev_attr.attr,
    + &sensor_dev_attr_in13_alarm.dev_attr.attr,
    +
    + &sensor_dev_attr_fan1_min.dev_attr.attr,
    + &sensor_dev_attr_fan2_min.dev_attr.attr,
    + &sensor_dev_attr_fan3_min.dev_attr.attr,
    + &sensor_dev_attr_fan4_min.dev_attr.attr,
    + &sensor_dev_attr_fan5_min.dev_attr.attr,
    + &sensor_dev_attr_fan6_min.dev_attr.attr,
    + &sensor_dev_attr_fan7_min.dev_attr.attr,
    + &sensor_dev_attr_fan8_min.dev_attr.attr,
    +
    + &sensor_dev_attr_fan1_input.dev_attr.attr,
    + &sensor_dev_attr_fan2_input.dev_attr.attr,
    + &sensor_dev_attr_fan3_input.dev_attr.attr,
    + &sensor_dev_attr_fan4_input.dev_attr.attr,
    + &sensor_dev_attr_fan5_input.dev_attr.attr,
    + &sensor_dev_attr_fan6_input.dev_attr.attr,
    + &sensor_dev_attr_fan7_input.dev_attr.attr,
    + &sensor_dev_attr_fan8_input.dev_attr.attr,
    +
    + &sensor_dev_attr_fan1_alarm.dev_attr.attr,
    + &sensor_dev_attr_fan2_alarm.dev_attr.attr,
    + &sensor_dev_attr_fan3_alarm.dev_attr.attr,
    + &sensor_dev_attr_fan4_alarm.dev_attr.attr,
    + &sensor_dev_attr_fan5_alarm.dev_attr.attr,
    + &sensor_dev_attr_fan6_alarm.dev_attr.attr,
    + &sensor_dev_attr_fan7_alarm.dev_attr.attr,
    + &sensor_dev_attr_fan8_alarm.dev_attr.attr,
    +
    + &sensor_dev_attr_force_pwm_max.dev_attr.attr,
    + &sensor_dev_attr_pwm1.dev_attr.attr,
    + &sensor_dev_attr_pwm2.dev_attr.attr,
    + &sensor_dev_attr_pwm3.dev_attr.attr,
    + &sensor_dev_attr_pwm4.dev_attr.attr,
    +
    + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr ,
    + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr ,
    + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr ,
    + &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr ,
    +
    + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr ,
    + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr ,
    + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr ,
    + &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr ,
    +
    + &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.at tr,
    + &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.at tr,
    + &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.at tr,
    + &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.at tr,
    +
    + &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.at tr,
    + &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.at tr,
    + &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.at tr,
    + &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.at tr,
    +
    + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.at tr,
    + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.at tr,
    + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.at tr,
    + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.at tr,
    +
    + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.at tr,
    + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.at tr,
    + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.at tr,
    + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.at tr,
    +
    + &sensor_dev_attr_pwm1_enable.dev_attr.attr,
    + &sensor_dev_attr_pwm2_enable.dev_attr.attr,
    + &sensor_dev_attr_pwm3_enable.dev_attr.attr,
    + &sensor_dev_attr_pwm4_enable.dev_attr.attr,
    +
    + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.a ttr,
    + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.a ttr,
    + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.a ttr,
    + &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.a ttr,
    + NULL
    +};
    +
    +/* Return 0 if detection is successful, -ENODEV otherwise */
    +static int adt7462_detect(struct i2c_client *client, int kind,
    + struct i2c_board_info *info)
    +{
    + struct i2c_adapter *adapter = client->adapter;
    +
    + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
    + return -ENODEV;
    +
    + if (kind <= 0) {
    + int vendor, device, revision;
    +
    + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
    + if (vendor != ADT7462_VENDOR)
    + return -ENODEV;
    +
    + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
    + if (device != ADT7462_DEVICE)
    + return -ENODEV;
    +
    + revision = i2c_smbus_read_byte_data(client,
    + ADT7462_REG_REVISION);
    + if (revision != ADT7462_REVISION)
    + return -ENODEV;
    + } else
    + dev_dbg(&adapter->dev, "detection forced\n");
    +
    + strlcpy(info->type, "adt7462", I2C_NAME_SIZE);
    +
    + return 0;
    +}
    +
    +static int adt7462_probe(struct i2c_client *client,
    + const struct i2c_device_id *id)
    +{
    + struct adt7462_data *data;
    + int err;
    +
    + data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL);
    + if (!data) {
    + err = -ENOMEM;
    + goto exit;
    + }
    +
    + i2c_set_clientdata(client, data);
    + mutex_init(&data->lock);
    +
    + dev_info(&client->dev, "%s chip found\n", client->name);
    +
    + /* Register sysfs hooks */
    + data->attrs.attrs = adt7462_attr;
    + err = sysfs_create_group(&client->dev.kobj, &data->attrs);
    + if (err)
    + goto exit_free;
    +
    + data->hwmon_dev = hwmon_device_register(&client->dev);
    + if (IS_ERR(data->hwmon_dev)) {
    + err = PTR_ERR(data->hwmon_dev);
    + goto exit_remove;
    + }
    +
    + return 0;
    +
    +exit_remove:
    + sysfs_remove_group(&client->dev.kobj, &data->attrs);
    +exit_free:
    + kfree(data);
    +exit:
    + return err;
    +}
    +
    +static int adt7462_remove(struct i2c_client *client)
    +{
    + struct adt7462_data *data = i2c_get_clientdata(client);
    +
    + hwmon_device_unregister(data->hwmon_dev);
    + sysfs_remove_group(&client->dev.kobj, &data->attrs);
    + kfree(data);
    + return 0;
    +}
    +
    +static int __init adt7462_init(void)
    +{
    + return i2c_add_driver(&adt7462_driver);
    +}
    +
    +static void __exit adt7462_exit(void)
    +{
    + i2c_del_driver(&adt7462_driver);
    +}
    +
    +MODULE_AUTHOR("Darrick J. Wong ");
    +MODULE_DESCRIPTION("ADT7462 driver");
    +MODULE_LICENSE("GPL");
    +
    +module_init(adt7462_init);
    +module_exit(adt7462_exit);

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  6. Re: [PATCH 1/5] adt7462: New hwmon driver

    On Fri, 2008-11-07 at 10:56 -0800, Darrick J. Wong wrote:
    > New driver to play with. As Jean mentioned a couple of years ago,
    > this
    > chip is a beast with odd combinations of 8 fans, 4 temperatures, and
    > 13 voltage sensors. This driver has been tested on an IntelliStation
    > Z30.
    >
    > Signed-off-by: Darrick J. Wong
    > ---
    > +#define MASK_AND_SHIFT(value, prefix) \
    > + (((value) & prefix##_MASK) >> prefix##_SHIFT)
    > +


    I'm not sure, but doesn't this exist somewhere in the common kernel
    headers.

    > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))


    DIV_ROUND_UP ?

    Harvey

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  7. Re: [PATCH 1/5] adt7462: New hwmon driver

    On Fri, 07 Nov 2008 10:56:26 -0800
    "Darrick J. Wong" wrote:

    >
    > New driver to play with. As Jean mentioned a couple of years ago, this
    > chip is a beast with odd combinations of 8 fans, 4 temperatures, and
    > 13 voltage sensors. This driver has been tested on an IntelliStation
    > Z30.
    >
    > ...
    >
    > + * 9. Vbatt/FSB_Vtt (pin 26)
    > + * A. +3.3V/+1.2V1 (pin 25)
    > + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24)
    > + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V)
    > + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V)
    > + *
    > + * Each of these 13 has a factor to convert raw to voltage. Even better,
    > + * the pins can be connected to other sensors (tach/gpio/hot/etc), which
    > + * makes the bookkeeping tricky.
    > + *
    > + * Some, but not all, of these voltages have low/high limits.
    > + */
    > +#define ADT7462_VOLT_COUNT 12
    > +
    > +#define ADT7462_VENDOR 0x41
    > +#define ADT7462_DEVICE 0x62
    > +/* datasheet only mentions a revision 4 */
    > +#define ADT7462_REVISION 0x04
    > +
    > +/* How often do we reread sensors values? (In jiffies) */
    > +#define SENSOR_REFRESH_INTERVAL (2 * HZ)
    > +
    > +/* How often do we reread sensor limit values? (In jiffies) */
    > +#define LIMIT_REFRESH_INTERVAL (60 * HZ)
    > +
    > +/* datasheet says to divide this number by the fan reading to get fan rpm */
    > +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x))
    > +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM
    > +#define FAN_PERIOD_INVALID 65535
    > +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)


    A macro which evaluates its args more than once is a bit naughty.

    > +#define MASK_AND_SHIFT(value, prefix) \
    > + (((value) & prefix##_MASK) >> prefix##_SHIFT)
    > +
    > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))


    hm, ok.

    That evaluates `divisor' twice, too.

    argh. ALIGN() has the same problem. Something like this...

    --- a/include/linux/kernel.h~a
    +++ a/include/linux/kernel.h
    @@ -39,7 +39,12 @@ extern const char linux_proc_banner[];
    #define STACK_MAGIC 0xdeadbeef

    #define ALIGN(x,a) __ALIGN_MASK(x,(typeof(x))(a)-1)
    -#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
    +
    +#define __ALIGN_MASK(x,mask) ({ \
    + typeof(mask) __mask = mask; \
    + (((x) + __mask) & ~__mask); \
    +})
    +
    #define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a)))
    #define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0)

    _

    Looks good to my untrained eye. Quite a large driver.
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  8. Re: [PATCH 1/5] adt7462: New hwmon driver

    On Fri, 07 Nov 2008 11:04:51 -0800
    Harvey Harrison wrote:

    > On Fri, 2008-11-07 at 10:56 -0800, Darrick J. Wong wrote:
    > > New driver to play with. As Jean mentioned a couple of years ago,
    > > this
    > > chip is a beast with odd combinations of 8 fans, 4 temperatures, and
    > > 13 voltage sensors. This driver has been tested on an IntelliStation
    > > Z30.
    > >
    > > Signed-off-by: Darrick J. Wong
    > > ---
    > > +#define MASK_AND_SHIFT(value, prefix) \
    > > + (((value) & prefix##_MASK) >> prefix##_SHIFT)
    > > +

    >
    > I'm not sure, but doesn't this exist somewhere in the common kernel
    > headers.


    No, core kernel doesn't have a macro which requires that the caller
    previously defined foo_MASK and foo_SHIFT. Only drivers are allowed to
    get away with such fugliness

    > > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))

    >
    > DIV_ROUND_UP ?


    That's different. This one should be called ROUND_CLOSEST or something
    like that.

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  9. Re: [PATCH 4/5] adt7473: Check inputs from sysfs writes

    On Fri, 07 Nov 2008 10:56:41 -0800
    "Darrick J. Wong" wrote:

    > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))


    It might make sense to rename this to ROUND_CLOSEST, fix the
    double-evaluation and whap it into kernel.h?

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  10. Re: [PATCH 1/5] adt7462: New hwmon driver

    On Fri, Nov 07, 2008 at 11:04:51AM -0800, Harvey Harrison wrote:
    > > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))

    >
    > DIV_ROUND_UP ?


    Actually, on closer inspection, DIV_ROUND_UP always rounds up, so I'll
    implement a ROUND_CLOSEST.

    --D
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  11. Re: [PATCH 1/5] adt7462: New hwmon driver

    On Fri, Nov 07, 2008 at 11:27:31AM -0800, Andrew Morton wrote:
    > > > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))

    > >
    > > DIV_ROUND_UP ?

    >
    > That's different. This one should be called ROUND_CLOSEST or something
    > like that.


    Actually, there _is_ such a macro in include/linux/kernel.h, but it does
    a double-eval naughty just like mine. That said, no need to bloat the
    source tree, so I can reroll, and possibly even fix the kernel macro.

    --D
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  12. Re: [PATCH 4/5] adt7473: Check inputs from sysfs writes

    On Fri, 7 Nov 2008 11:20:40 -0800, Andrew Morton wrote:
    > On Fri, 07 Nov 2008 10:56:41 -0800
    > "Darrick J. Wong" wrote:
    >
    > > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))

    >
    > It might make sense to rename this to ROUND_CLOSEST, fix the
    > double-evaluation and whap it into kernel.h?


    To be consistent with DIV_ROUND_UP, I'd rather name the new function
    DIV_ROUND_CLOSEST. But other than that, yes I agree that making this an
    inline function and moving it to kernel.h would be a good idea. Many
    many hwmon drivers use this and people keep asking about this construct.

    --
    Jean Delvare
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  13. Re: [PATCH 4/5] adt7473: Check inputs from sysfs writes

    On Fri, 2008-11-07 at 11:20 -0800, Andrew Morton wrote:
    > > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))

    > It might make sense to rename this to ROUND_CLOSEST, fix the
    > double-evaluation and whap it into kernel.h?


    ROUND_HALF_UP?

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  14. Re: [PATCH 4/5] adt7473: Check inputs from sysfs writes

    Jean Delvare wrote:
    > On Fri, 07 Nov 2008 12:49:34 -0800, Joe Perches wrote:
    >> On Fri, 2008-11-07 at 11:20 -0800, Andrew Morton wrote:
    >>>> +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))
    >>> It might make sense to rename this to ROUND_CLOSEST, fix the
    >>> double-evaluation and whap it into kernel.h?

    >> ROUND_HALF_UP?

    >
    > What would that supposedly mean?


    Just go with DIV_ROUND_CLOSEST() or DIV_ROUND().
    The _CLOSEST() is redundant to ROUND .. IMO.

    --
    ~Randy
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  15. Re: [PATCH 4/5] adt7473: Check inputs from sysfs writes

    On Fri, 07 Nov 2008 12:49:34 -0800, Joe Perches wrote:
    > On Fri, 2008-11-07 at 11:20 -0800, Andrew Morton wrote:
    > > > +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor))

    > > It might make sense to rename this to ROUND_CLOSEST, fix the
    > > double-evaluation and whap it into kernel.h?

    >
    > ROUND_HALF_UP?


    What would that supposedly mean?

    --
    Jean Delvare
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  16. Re: [PATCH 2/5] i5k_amb: Load automatically on all 5000/5400 chipsets

    Hi Darrick,

    On Fri, 07 Nov 2008 10:56:31 -0800, Darrick J. Wong wrote:
    > It turns out that we cannot create a pci_driver in this driver because PCI will
    > not call this module's probe function if the i5000-edac driver is already
    > loaded.


    I seem to recall work in progress to let multiple drivers bind to the
    same PCI device. Greg, Kay, what's the status?

    > That said, we only want one value (AMBASE) from the PCI config space.
    > Neither driver alters this value, so it's safe to read it. However, we still
    > want the module aliases, so provide that.
    >
    > Signed-off-by: Darrick J. Wong
    > ---
    >
    > drivers/hwmon/i5k_amb.c | 8 ++++++++
    > 1 files changed, 8 insertions(+), 0 deletions(-)
    >
    > diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
    > index 2ede938..a3fa639 100644
    > --- a/drivers/hwmon/i5k_amb.c
    > +++ b/drivers/hwmon/i5k_amb.c
    > @@ -490,6 +490,14 @@ static unsigned long chipset_ids[] = {
    > 0
    > };
    >
    > +static struct pci_device_id i5k_amb_ids[] __devinitdata = {
    > + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
    > + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
    > + { 0, },
    > +};
    > +
    > +MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
    > +
    > static int __devinit i5k_amb_probe(struct platform_device *pdev)
    > {
    > struct i5k_amb_data *data;
    >


    Looks good to me, we can apply this for now.

    Acked-by: Jean Delvare

    --
    Jean Delvare
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  17. Re: [PATCH 3/5] adt7470: Check input range when sysfs files are written

    On Fri, 07 Nov 2008 10:56:36 -0800
    "Darrick J. Wong" wrote:

    > Subject: [PATCH 3/5] adt7470: Check input range when sysfs files are written
    >
    > Implement correct rounding and range checking for adt7470.
    >
    > Signed-off-by: Darrick J. Wong


    When writing changelogs, please explain _why_ a change was made, as
    well as what the change does.

    Coz I'm sitting here wondering if we need this in 2.6.28 and I don't
    have all the information.

    Looking at it, I guess it does change the userspace interface in minor
    ways, so we should merge it into 2.6.28. Ditto
    adt7473-check-inputs-from-sysfs-writes.patch. Agree?

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  18. Re: [PATCH 3/5] adt7470: Check input range when sysfs files are written

    On Mon, Nov 10, 2008 at 04:22:14PM -0800, Andrew Morton wrote:

    > When writing changelogs, please explain _why_ a change was made, as
    > well as what the change does.


    Sorry about that. Here's a revision:

    Implement correct range checking for adt7470 to prevent userland from
    writing impossible values into the chip, and cap out-of-range values per
    standard hwmon conventions.

    Implement correct rounding of input values per standard hwmon
    conventions.

    Is that better?

    (Same goes for the adt7473 patch.)

    > Looking at it, I guess it does change the userspace interface in minor
    > ways, so we should merge it into 2.6.28. Ditto
    > adt7473-check-inputs-from-sysfs-writes.patch. Agree?


    Yes.

    --D
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  19. Re: [PATCH 2/5] i5k_amb: Load automatically on all 5000/5400 chipsets

    On Sat, Nov 08, 2008 at 12:09:50PM +0100, Jean Delvare wrote:
    > Hi Darrick,
    >
    > On Fri, 07 Nov 2008 10:56:31 -0800, Darrick J. Wong wrote:
    > > It turns out that we cannot create a pci_driver in this driver because PCI will
    > > not call this module's probe function if the i5000-edac driver is already
    > > loaded.

    >
    > I seem to recall work in progress to let multiple drivers bind to the
    > same PCI device. Greg, Kay, what's the status?


    Hannes provided me with a bunch of patches, some of which applied, some
    didn't. I had to back some of them out as they were wrong, and I need
    to revisit them when I get a chance

    thanks,

    greg k-h
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

+ Reply to Thread