[PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask - Kernel

This is a discussion on [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask - Kernel ; * Ingo Molnar wrote: > > * Mike Travis wrote: > > > any_online_cpu() is a good name, but it takes a cpumask_t, not a > > pointer. > > > > Signed-off-by: Rusty Russell > > Signed-off-by: Mike Travis ...

+ Reply to Thread
Page 3 of 4 FirstFirst 1 2 3 4 LastLast
Results 41 to 60 of 77

Thread: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask

  1. Re: [PATCH 22/35] cpumask: deprecate any_online_cpu() in favour of cpumask_any/cpumask_any_and From: Rusty Russell <rusty@rustcorp.com.au>


    * Ingo Molnar wrote:

    >
    > * Mike Travis wrote:
    >
    > > any_online_cpu() is a good name, but it takes a cpumask_t, not a
    > > pointer.
    > >
    > > Signed-off-by: Rusty Russell
    > > Signed-off-by: Mike Travis

    >
    > almost all the patches have a missing \n and thus wrong authorship...


    ok, i fixed them up.

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  2. Re: [PATCH 27/35] cpumask: accessors to manipulate possible/present/online/active maps From: Rusty Russell <rusty@rustcorp.com.au>


    * Mike Travis wrote:

    > +void set_cpu_possible(unsigned int cpu, bool possible)
    > +{
    > + if (possible)
    > + cpumask_set_cpu(cpu, &cpu_possible_map);
    > + else
    > + cpumask_clear_cpu(cpu, &cpu_possible_map);
    > +}
    > +void set_cpu_present(unsigned int cpu, bool present)
    > +{


    i added the missing newlines between all the new function definitions.

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  3. Re: [PATCH 23/35] cpumask: cpumask_any_but() From: Rusty Russell <rusty@rustcorp.com.au>


    * Mike Travis wrote:

    > +int cpumask_any_but(const struct cpumask *mask, unsigned int cpu)
    > +{
    > + unsigned int i;
    > +
    > + for_each_cpu(i, mask)
    > + if (i != cpu)
    > + break;
    > + return i;
    > +}
    > +
    > /* These are not inline because of header tangles. */


    i've added a missing export here.

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  4. Re: [PATCH 35/35] x86: clean up speedctep-centrino and reduce cpumask_t usage From: Rusty Russell <rusty@rustcorp.com.au>


    * Rusty Russell wrote:

    > On Thursday 23 October 2008 13:09:01 Mike Travis wrote:
    > > 1) The #ifdef CONFIG_HOTPLUG_CPU seems unnecessary these days.
    > > 2) The loop can simply skip over offline cpus, rather than creating a tmp
    > > mask.
    > > 3) set_mask is set to either a single cpu or all online cpus in a
    > > policy. Since it's just used for set_cpus_allowed(), any offline cpus in a
    > > policy don't matter, so we can just use cpumask_of_cpu() or the
    > > policy->cpus.

    >
    > Note that this cleanup stands alone; it's just that I read this code I
    > couldn't help but tidy it up.
    >
    > Ingo: do you just want to put this in your normal tree for sending to
    > Linus?


    hm, cpufreq stuff belongs into davej's tree.

    i skipped #34 and #35 for now, we can live without them, correct?

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  5. Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


    * Mike Travis wrote:

    > [Resubmit: cleanup and rebase on latest tip/master.]
    >
    > Redesign cpumask API to explicitly declare struct cpumask pointers to
    > the cpumask_* operators and add functions to make it easier to support
    > struct cpumask pointers on the stack.
    >
    > This patchset supplies the infrastructure going forward to implement
    > this new struct cpumask API. Many more patches (currently 58) have
    > been written and tested to verify the functionality of this API.
    > These will be submitted as soon as they are thoroughly tested.
    >
    > Compiled and tested on x86_64.
    >
    > Based on tip/master @ v2.6.27-6973-ga90cd11


    okay, i've picked up these patches into tip/cpus4096-v2 and started
    testing them.

    I fixed the From: line oddities - please holler if they are wrong
    anywhere, we can still rebase this.

    Note, i've merged this to _after_ the huge arch/x86/include/asm/ headers
    move which we sent a pull request for earlier today - this will simplify
    logistics.

    ( I also fixed up a handful of obvious style problems in various places
    - please be more careful about comment structure, whitespaces, etc. -
    they just distract from general review and hurt the merits of your
    patches. )

    I also added "Impact:" lines to every commit - a one-line summary of the
    expected outcome of the change. (Please double-check those impact lines
    - if you see anything odd it means that i missed some detail in the
    commit - that will need to be fixed if it happens.)

    I've just completed the first basic step of testing: i did 68 kernel
    builds to test bisectability: all 34 commit point builds fine on both
    64-bit and 32-bit as well. (This took some time as almost every commit
    touches cpumask.h, forcing a full kernel rebuild.)

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  6. Re: [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask

    Thanks! I'll check this out immediately...

    Ingo Molnar wrote:
    > ok, the new cpumask code blew up in -tip testing, with various sorts of
    > slab corruptions during scheduler init:
    >
    > [ 0.544012] groups: 0-1
    > [ 0.546689] ================================================== ===========================
    > [ 0.548000] BUG kmalloc-8: Wrong object count. Counter is 15 but counted were 50
    > [ 0.548000] -----------------------------------------------------------------------------
    > [ 0.548000]
    > [ 0.548000] INFO: Slab 0xffffe200019d7ae0 objects=51 used=15 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    > [ 0.548000] Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #45066
    > [ 0.548000] Call Trace:
    > [ 0.548000] [] slab_err+0xa0/0xb0
    > [ 0.548000] [] ? trace_hardirqs_on+0xd/0x10
    > [ 0.548000] [] ? trace_hardirqs_on_caller+0x15a/0x1b0
    > [ 0.548000] [] ? cpu_attach_domain+0x172/0x6b0
    > [ 0.548000] [] ? check_bytes_and_report+0x3d/0xe0
    > [ 0.548000] [] on_freelist+0x197/0x240
    > [ 0.548000] [] __slab_free+0x1a6/0x310
    > [ 0.548000] [] ? free_cpumask_var+0x9/0x10
    > [ 0.548000] [] kfree+0xb7/0x140
    > [ 0.548000] [] ? free_cpumask_var+0x9/0x10
    > [ 0.548000] [] free_cpumask_var+0x9/0x10
    > [ 0.548000] [] __build_sched_domains+0x49c/0xd30
    > [ 0.548000] [] ? trace_hardirqs_on+0xd/0x10
    > [ 0.548000] [] sched_init_smp+0xba/0x2b0
    > [ 0.548000] [] ? trace_hardirqs_on_caller+0x15a/0x1b0
    > [ 0.548000] [] ? check_bytes_and_report+0x3d/0xe0
    > [ 0.548000] [] ? check_object+0x238/0x270
    > [ 0.548000] [] ? init_object+0x54/0x90
    > [ 0.548000] [] ? trace_hardirqs_on+0xd/0x10
    > [ 0.548000] [] ? trace_hardirqs_on_caller+0x15a/0x1b0
    > [ 0.548000] [] ? trace_hardirqs_on+0xd/0x10
    > [ 0.548000] [] ? check_nmi_watchdog+0x204/0x260
    > [ 0.548000] [] ? check_nmi_watchdog+0x204/0x260
    > [ 0.548000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    > [ 0.548000] [] kernel_init+0x176/0x240
    > [ 0.548000] [] child_rip+0xa/0x11
    > [ 0.548000] [] ? restore_args+0x0/0x30
    > [ 0.548000] [] ? kernel_init+0x0/0x240
    > [ 0.548000] [] ? child_rip+0x0/0x11
    > [ 0.548000] FIX kmalloc-8: Object count adjusted.
    > [ 0.548000] ================================================== ===========================
    >
    > i suspect it's due to:
    >
    > 01b8bd9: sched: cpumask: get rid of boutique sched.c allocations, use cpumask_va
    >
    > note, CONFIG_MAXSMP is set in the .config, so this is with the dynamic
    > cpumask_t.
    >
    > Ingo
    >


    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  7. Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask

    Ingo Molnar wrote:
    > * Mike Travis wrote:
    >
    >> [Resubmit: cleanup and rebase on latest tip/master.]
    >>
    >> Redesign cpumask API to explicitly declare struct cpumask pointers to
    >> the cpumask_* operators and add functions to make it easier to support
    >> struct cpumask pointers on the stack.
    >>
    >> This patchset supplies the infrastructure going forward to implement
    >> this new struct cpumask API. Many more patches (currently 58) have
    >> been written and tested to verify the functionality of this API.
    >> These will be submitted as soon as they are thoroughly tested.
    >>
    >> Compiled and tested on x86_64.
    >>
    >> Based on tip/master @ v2.6.27-6973-ga90cd11

    >
    > okay, i've picked up these patches into tip/cpus4096-v2 and started
    > testing them.
    >

    Thanks!

    > I fixed the From: line oddities - please holler if they are wrong
    > anywhere, we can still rebase this.


    I found two of them and had resubmitted them, but perhaps that didn't take
    either?

    >
    > Note, i've merged this to _after_ the huge arch/x86/include/asm/ headers
    > move which we sent a pull request for earlier today - this will simplify
    > logistics.
    >
    > ( I also fixed up a handful of obvious style problems in various places
    > - please be more careful about comment structure, whitespaces, etc. -
    > they just distract from general review and hurt the merits of your
    > patches. )


    I ran all the patches through checkpatches, the only complaints were
    about unavoidable items (like we had to use NR_CPUS or we had to introduce
    two new typedefs). Everything else was error and warning free...?

    >
    > I also added "Impact:" lines to every commit - a one-line summary of the
    > expected outcome of the change. (Please double-check those impact lines
    > - if you see anything odd it means that i missed some detail in the
    > commit - that will need to be fixed if it happens.)


    Ok, thanks! I'll check them out.
    >
    > I've just completed the first basic step of testing: i did 68 kernel
    > builds to test bisectability: all 34 commit point builds fine on both
    > 64-bit and 32-bit as well. (This took some time as almost every commit
    > touches cpumask.h, forcing a full kernel rebuild.)


    Yes, my regression build for allyesconfig took about 11 hours.
    >
    > Ingo


    Thanks!
    Mike

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  8. Re: [PATCH 22/35] cpumask: deprecate any_online_cpu() in favour of cpumask_any/cpumask_any_and From: Rusty Russell <rusty@rustcorp.com.au>

    Ingo Molnar wrote:
    > * Mike Travis wrote:
    >
    >> any_online_cpu() is a good name, but it takes a cpumask_t, not a
    >> pointer.
    >>
    >> Signed-off-by: Rusty Russell
    >> Signed-off-by: Mike Travis

    >
    > almost all the patches have a missing \n and thus wrong authorship...
    >
    > Ingo


    Hmm, that's strange. It might be the way quilt mail gathers everything up
    into mbox format. I'll experiment a little bit to see what's causing it.
    (This is the first time I've used the From: line as well as subject lines
    w/o Subject: preceeding them.)

    Thanks,
    Mike
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  9. [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


    ok, the new cpumask code blew up in -tip testing, with various sorts of
    slab corruptions during scheduler init:

    [ 0.544012] groups: 0-1
    [ 0.546689] ================================================== ===========================
    [ 0.548000] BUG kmalloc-8: Wrong object count. Counter is 15 but counted were 50
    [ 0.548000] -----------------------------------------------------------------------------
    [ 0.548000]
    [ 0.548000] INFO: Slab 0xffffe200019d7ae0 objects=51 used=15 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    [ 0.548000] Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #45066
    [ 0.548000] Call Trace:
    [ 0.548000] [] slab_err+0xa0/0xb0
    [ 0.548000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.548000] [] ? trace_hardirqs_on_caller+0x15a/0x1b0
    [ 0.548000] [] ? cpu_attach_domain+0x172/0x6b0
    [ 0.548000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.548000] [] on_freelist+0x197/0x240
    [ 0.548000] [] __slab_free+0x1a6/0x310
    [ 0.548000] [] ? free_cpumask_var+0x9/0x10
    [ 0.548000] [] kfree+0xb7/0x140
    [ 0.548000] [] ? free_cpumask_var+0x9/0x10
    [ 0.548000] [] free_cpumask_var+0x9/0x10
    [ 0.548000] [] __build_sched_domains+0x49c/0xd30
    [ 0.548000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.548000] [] sched_init_smp+0xba/0x2b0
    [ 0.548000] [] ? trace_hardirqs_on_caller+0x15a/0x1b0
    [ 0.548000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.548000] [] ? check_object+0x238/0x270
    [ 0.548000] [] ? init_object+0x54/0x90
    [ 0.548000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.548000] [] ? trace_hardirqs_on_caller+0x15a/0x1b0
    [ 0.548000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.548000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.548000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.548000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    [ 0.548000] [] kernel_init+0x176/0x240
    [ 0.548000] [] child_rip+0xa/0x11
    [ 0.548000] [] ? restore_args+0x0/0x30
    [ 0.548000] [] ? kernel_init+0x0/0x240
    [ 0.548000] [] ? child_rip+0x0/0x11
    [ 0.548000] FIX kmalloc-8: Object count adjusted.
    [ 0.548000] ================================================== ===========================

    i suspect it's due to:

    01b8bd9: sched: cpumask: get rid of boutique sched.c allocations, use cpumask_va

    note, CONFIG_MAXSMP is set in the .config, so this is with the dynamic
    cpumask_t.

    Ingo


  10. Re: [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


    * Ingo Molnar wrote:

    > ok, the new cpumask code blew up in -tip testing, with various sorts
    > of slab corruptions during scheduler init:


    another 64-bit testbox has similar problems - see the log attached
    below. Config attached as well. The bootup seems to have continued fine.

    Ingo

    ------------>
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (11732.92 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level CPU
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level CPU
    groups: 1 0
    ================================================== ===========================
    BUG kmalloc-8: Wrong object count. Counter is 11 but counted were 50
    -----------------------------------------------------------------------------

    INFO: Slab 0xffffe200019cc2d8 objects=51 used=11 fp=0xffff88003f807370 flags=0x40000000000000c3
    Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #1
    Call Trace:
    [] slab_err+0xa0/0xb0
    [] ? _raw_spin_unlock+0x6d/0xd0
    [] ? cpu_attach_domain+0x172/0x6b0
    [] ? check_bytes+0x9/0x30
    [] ? slab_pad_check+0xd8/0x160
    [] on_freelist+0x197/0x240
    [] __slab_free+0x1c7/0x330
    [] ? free_cpumask_var+0x9/0x10
    [] kfree+0xbb/0x120
    [] ? free_cpumask_var+0x9/0x10
    [] free_cpumask_var+0x9/0x10
    [] __build_sched_domains+0x227/0x580
    [] sched_init_smp+0x95/0x280
    [] ? native_smp_cpus_done+0x1aa/0x2b0
    [] kernel_init+0x170/0x240
    [] ? early_idt_handler+0x0/0x73
    [] child_rip+0xa/0x11
    [] ? early_idt_handler+0x0/0x73
    [] ? early_idt_handler+0x0/0x73
    [] ? kernel_init+0x0/0x240
    [] ? child_rip+0x0/0x11
    FIX kmalloc-8: Object count adjusted.
    ================================================== ===========================
    BUG kmalloc-8: Redzone overwritten
    -----------------------------------------------------------------------------

    INFO: 0xffff88003f807328-0xffff88003f80732f. First byte 0x0 instead of 0xcc
    INFO: Slab 0xffffe200019cc2d8 objects=51 used=50 fp=0xffff88003f807370 flags=0x40000000000000c3
    INFO: Object 0xffff88003f807320 @offset=800 fp=0x0000000000000000

    Bytes b4 0xffff88003f807310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    Object 0xffff88003f807320: 00 00 00 00 00 00 00 00 ........
    Redzone 0xffff88003f807328: 00 00 00 00 00 00 00 00 ........
    Padding 0xffff88003f807368: 00 00 00 00 00 00 00 00 ........
    Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #1
    Call Trace:
    [] print_trailer+0xfc/0x160
    [] check_bytes_and_report+0xb8/0xe0
    [] check_object+0x6a/0x270
    [] __slab_free+0x229/0x330
    [] ? free_cpumask_var+0x9/0x10
    [] kfree+0xbb/0x120
    [] ? free_cpumask_var+0x9/0x10
    [] free_cpumask_var+0x9/0x10
    [] __build_sched_domains+0x227/0x580
    [] sched_init_smp+0x95/0x280
    [] ? native_smp_cpus_done+0x1aa/0x2b0
    [] kernel_init+0x170/0x240
    [] ? early_idt_handler+0x0/0x73
    [] child_rip+0xa/0x11
    [] ? early_idt_handler+0x0/0x73
    [] ? early_idt_handler+0x0/0x73
    [] ? kernel_init+0x0/0x240
    [] ? child_rip+0x0/0x11
    FIX kmalloc-8: Restoring 0xffff88003f807328-0xffff88003f80732f=0xcc

    ================================================== ===========================
    BUG kmalloc-8: Redzone overwritten
    -----------------------------------------------------------------------------

    INFO: 0xffff88003f8072d8-0xffff88003f8072df. First byte 0x0 instead of 0xcc
    INFO: Slab 0xffffe200019cc2d8 objects=51 used=50 fp=0xffff88003f807370 flags=0x40000000000000c3
    INFO: Object 0xffff88003f8072d0 @offset=720 fp=0x0000000000000000

    Bytes b4 0xffff88003f8072c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    Object 0xffff88003f8072d0: 03 00 00 00 00 00 00 00 ........
    Redzone 0xffff88003f8072d8: 00 00 00 00 00 00 00 00 ........
    Padding 0xffff88003f807318: 00 00 00 00 00 00 00 00 ........
    Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #1
    Call Trace:
    [] print_trailer+0xfc/0x160
    [] check_bytes_and_report+0xb8/0xe0
    [] check_object+0x6a/0x270
    [] __slab_free+0x229/0x330
    [] ? free_cpumask_var+0x9/0x10
    [] kfree+0xbb/0x120
    [] ? free_cpumask_var+0x9/0x10
    [] free_cpumask_var+0x9/0x10
    [] __build_sched_domains+0x230/0x580
    [] sched_init_smp+0x95/0x280
    [] ? native_smp_cpus_done+0x1aa/0x2b0
    [] kernel_init+0x170/0x240
    [] ? early_idt_handler+0x0/0x73
    [] child_rip+0xa/0x11
    [] ? early_idt_handler+0x0/0x73
    [] ? early_idt_handler+0x0/0x73
    [] ? kernel_init+0x0/0x240
    [] ? child_rip+0x0/0x11
    FIX kmalloc-8: Restoring 0xffff88003f8072d8-0xffff88003f8072df=0xcc

    ================================================== ===========================
    BUG kmalloc-8: Redzone overwritten
    -----------------------------------------------------------------------------

    INFO: 0xffff88003f807288-0xffff88003f80728f. First byte 0x0 instead of 0xcc
    INFO: Slab 0xffffe200019cc2d8 objects=51 used=50 fp=0xffff88003f807370 flags=0x40000000000000c3
    INFO: Object 0xffff88003f807280 @offset=640 fp=0x0000000000000000

    Bytes b4 0xffff88003f807270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    Object 0xffff88003f807280: 00 00 00 00 00 00 00 00 ........
    Redzone 0xffff88003f807288: 00 00 00 00 00 00 00 00 ........
    Padding 0xffff88003f8072c8: 00 00 00 00 00 00 00 00 ........
    Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #1
    Call Trace:
    [] print_trailer+0xfc/0x160
    [] check_bytes_and_report+0xb8/0xe0
    [] check_object+0x6a/0x270
    [] __slab_free+0x229/0x330
    [] ? free_cpumask_var+0x9/0x10
    [] kfree+0xbb/0x120
    [] ? free_cpumask_var+0x9/0x10
    [] free_cpumask_var+0x9/0x10
    [] __build_sched_domains+0xad/0x580
    [] sched_init_smp+0x95/0x280
    [] ? native_smp_cpus_done+0x1aa/0x2b0
    [] kernel_init+0x170/0x240
    [] ? early_idt_handler+0x0/0x73
    [] child_rip+0xa/0x11
    [] ? early_idt_handler+0x0/0x73
    [] ? early_idt_handler+0x0/0x73
    [] ? kernel_init+0x0/0x240
    [] ? child_rip+0x0/0x11
    FIX kmalloc-8: Restoring 0xffff88003f807288-0xffff88003f80728f=0xcc

    ================================================== ===========================
    BUG kmalloc-8: Redzone overwritten
    -----------------------------------------------------------------------------

    INFO: 0xffff88003f807238-0xffff88003f80723f. First byte 0x0 instead of 0xcc
    INFO: Slab 0xffffe200019cc2d8 objects=51 used=50 fp=0xffff88003f807370 flags=0x40000000000000c3
    INFO: Object 0xffff88003f807230 @offset=560 fp=0x0000000000000000

    Bytes b4 0xffff88003f807220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    Object 0xffff88003f807230: 00 00 00 00 00 00 00 00 ........
    Redzone 0xffff88003f807238: 00 00 00 00 00 00 00 00 ........
    Padding 0xffff88003f807278: 00 00 00 00 00 00 00 00 ........
    Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #1
    Call Trace:
    [] print_trailer+0xfc/0x160
    [] check_bytes_and_report+0xb8/0xe0
    [] check_object+0x6a/0x270
    [] __slab_free+0x229/0x330
    [] ? free_cpumask_var+0x9/0x10
    [] kfree+0xbb/0x120
    [] ? free_cpumask_var+0x9/0x10
    [] free_cpumask_var+0x9/0x10
    [] __build_sched_domains+0x8d/0x580
    [] sched_init_smp+0x95/0x280
    [] ? native_smp_cpus_done+0x1aa/0x2b0
    [] kernel_init+0x170/0x240
    [] ? early_idt_handler+0x0/0x73
    [] child_rip+0xa/0x11
    [] ? early_idt_handler+0x0/0x73
    [] ? early_idt_handler+0x0/0x73
    [] ? kernel_init+0x0/0x240
    [] ? child_rip+0x0/0x11
    FIX kmalloc-8: Restoring 0xffff88003f807238-0xffff88003f80723f=0xcc

    ================================================== ===========================
    BUG kmalloc-8: Redzone overwritten
    -----------------------------------------------------------------------------

    INFO: 0xffff88003f8071e8-0xffff88003f8071ef. First byte 0x0 instead of 0xcc
    INFO: Slab 0xffffe200019cc2d8 objects=51 used=50 fp=0xffff88003f807370 flags=0x40000000000000c3
    INFO: Object 0xffff88003f8071e0 @offset=480 fp=0x0000000000000000

    Bytes b4 0xffff88003f8071d0: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
    Object 0xffff88003f8071e0: 03 00 00 00 00 00 00 00 ........
    Redzone 0xffff88003f8071e8: 00 00 00 00 00 00 00 00 ........
    Padding 0xffff88003f807228: 00 00 00 00 00 00 00 00 ........
    Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #1
    Call Trace:
    [] print_trailer+0xfc/0x160
    [] check_bytes_and_report+0xb8/0xe0
    [] check_object+0x6a/0x270
    [] __slab_free+0x229/0x330
    [] ? free_cpumask_var+0x9/0x10
    [] kfree+0xbb/0x120
    [] ? free_cpumask_var+0x9/0x10
    [] free_cpumask_var+0x9/0x10
    [] __build_sched_domains+0x6f/0x580
    [] sched_init_smp+0x95/0x280
    [] ? native_smp_cpus_done+0x1aa/0x2b0
    [] kernel_init+0x170/0x240
    [] ? early_idt_handler+0x0/0x73
    [] child_rip+0xa/0x11
    [] ? early_idt_handler+0x0/0x73
    [] ? early_idt_handler+0x0/0x73
    [] ? kernel_init+0x0/0x240
    [] ? child_rip+0x0/0x11
    FIX kmalloc-8: Restoring 0xffff88003f8071e8-0xffff88003f8071ef=0xcc

    ================================================== ===========================
    BUG kmalloc-8: Redzone overwritten
    -----------------------------------------------------------------------------

    INFO: 0xffff88003f807378-0xffff88003f80737f. First byte 0x0 instead of 0xbb
    INFO: Slab 0xffffe200019cc2d8 objects=51 used=50 fp=0xffff88003f807370 flags=0x40000000000000c3
    INFO: Object 0xffff88003f807370 @offset=880 fp=0x0000000000000000

    Bytes b4 0xffff88003f807360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    Object 0xffff88003f807370: 00 00 00 00 00 00 00 00 ........
    Redzone 0xffff88003f807378: 00 00 00 00 00 00 00 00 ........
    Padding 0xffff88003f8073b8: 00 00 00 00 00 00 00 00 ........
    Pid: 1, comm: swapper Not tainted 2.6.27-tip-07104-g5cf7b67-dirty #1
    Call Trace:
    [] print_trailer+0xfc/0x160
    [] check_bytes_and_report+0xb8/0xe0
    [] ? register_sched_domain_sysctl+0xce/0x470
    [] check_object+0x6a/0x270
    [] __slab_alloc+0x4df/0x590
    [] ? register_sched_domain_sysctl+0xce/0x470
    [] ? register_sched_domain_sysctl+0xce/0x470
    [] __kmalloc_track_caller+0x100/0x110
    [] kstrdup+0x45/0x120
    [] register_sched_domain_sysctl+0xce/0x470
    [] sched_init_smp+0x9a/0x280
    [] ? native_smp_cpus_done+0x1aa/0x2b0
    [] kernel_init+0x170/0x240
    [] ? early_idt_handler+0x0/0x73
    [] child_rip+0xa/0x11
    [] ? early_idt_handler+0x0/0x73
    [] ? early_idt_handler+0x0/0x73
    [] ? kernel_init+0x0/0x240
    [] ? child_rip+0x0/0x11
    FIX kmalloc-8: Restoring 0xffff88003f807378-0xffff88003f80737f=0xbb

    FIX kmalloc-8: Marking all objects used
    calling init_cpufreq_transition_notifier_list+0x0/0x20 @ 1
    initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 usecs
    calling net_ns_init+0x0/0x180 @ 1
    net_namespace: 728 bytes
    initcall net_ns_init+0x0/0x180 returned 0 after 3906 usecs
    calling cpufreq_tsc+0x0/0x40 @ 1
    initcall cpufreq_tsc+0x0/0x40 returned 0 after 0 usecs
    calling init_smp_flush+0x0/0x80 @ 1
    initcall init_smp_flush+0x0/0x80 returned 0 after 0 usecs
    calling print_banner+0x0/0x10 @ 1
    Booting paravirtualized kernel on bare hardware
    initcall print_banner+0x0/0x10 returned 0 after 3906 usecs
    calling sysctl_init+0x0/0x40 @ 1
    initcall sysctl_init+0x0/0x40 returned 0 after 0 usecs
    calling ksysfs_init+0x0/0xc0 @ 1
    initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
    calling init_jiffies_clocksource+0x0/0x20 @ 1
    initcall init_jiffies_clocksource+0x0/0x20 returned 0 after 0 usecs
    calling pm_init+0x0/0x40 @ 1
    initcall pm_init+0x0/0x40 returned 0 after 0 usecs


  11. Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


    * Mike Travis wrote:

    > > I fixed the From: line oddities - please holler if they are wrong
    > > anywhere, we can still rebase this.

    >
    > I found two of them and had resubmitted them, but perhaps that didn't
    > take either?


    i had to fix up about 20.

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  12. Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask

    Ingo Molnar wrote:
    > * Mike Travis wrote:
    >
    >>> I fixed the From: line oddities - please holler if they are wrong
    >>> anywhere, we can still rebase this.

    >> I found two of them and had resubmitted them, but perhaps that didn't
    >> take either?

    >
    > i had to fix up about 20.
    >
    > Ingo


    Ok, thanks. I suspect quilt mail is handling things incorrectly (I am
    using a slightly older version (0.46 vs. 0.47) [the later removed
    "remove" which I found handier than "revert".] I'll put checking this
    out on my 'todo' list.

    Thanks,
    Mike

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  13. Re: [PATCH 27/35] cpumask: accessors to manipulate possible/present/online/active maps From: Rusty Russell <rusty@rustcorp.com.au>

    Ingo Molnar wrote:
    > * Mike Travis wrote:
    >
    >> +void set_cpu_possible(unsigned int cpu, bool possible)
    >> +{
    >> + if (possible)
    >> + cpumask_set_cpu(cpu, &cpu_possible_map);
    >> + else
    >> + cpumask_clear_cpu(cpu, &cpu_possible_map);
    >> +}
    >> +void set_cpu_present(unsigned int cpu, bool present)
    >> +{

    >
    > i added the missing newlines between all the new function definitions.
    >
    > Ingo


    Thanks! I normally do this when spotting them.
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  14. Re: [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


    * Mike Travis wrote:

    > Ingo Molnar wrote:
    > > ok, the new cpumask code blew up in -tip testing, with various sorts of
    > > slab corruptions during scheduler init:
    > >

    > ...
    >
    > Curious thing happens here. I created the tree as you suggested
    > (branch tip/cpus4096-v2) and copied in your .config file. Running it
    > through "silentoldconfig" (choosing only the defaults), I get the
    > following changes. This makes me suspect that I'm not testing the
    > same thing as you are...? Perhaps my git setup was not correct?


    no - i have some extras that forces on SMP for example to make it more
    likely to trigger in random tests (it's far more interesting from a QA
    point of view than UP).

    so as long as you select SMP you should get the same config. Lemme do a
    ..config you can plug in.

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  15. Re: [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


    i've attached the config that will build and boot with the
    tip/cpus4096-v2 branch.

    (I'm now double-checking whether it reproduces those slab corruption
    messages.)

    Ingo


  16. [bug #2] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


    Thomas has started a -tip cross-build test, and there's massive
    cross-build failures as well due to the cpumask changes:

    http://www.tglx.de/autoqa-cgi/index?run=140&tree=8

    Run 140: 11 of 19 OK

    8 architecture configs out of 19 fail to build, 7 of which failures is
    this patchset's fault:

    powerpc, ps3_defconfig:

    http://www.tglx.de/autoqa-logs/000140-0008-0006.log

    /home/tglx/work/kernel/autoqa/linux-2.6-tip/
    arch/powerpc/platforms/cell/spu_base.c:117:
    error: implicit declaration of function '__cpus_setall'

    m32r defconfig:

    http://www.tglx.de/autoqa-logs/000140-0008-0013.log

    from /home/tglx/work/kernel/autoqa/linux-2.6-tip/arch/m32r/kernel/smp.c:18:
    include2/asm/smp.h:66: error: expected ')' before '*' token
    include2/asm/smp.h:66: error: expected ')' before 'cpu_possible_mask'
    include2/asm/smp.h:67: error: expected ')' before '*' token
    include2/asm/smp.h:67: error: expected ')' before 'cpu_present_mask'

    xtensa defconfig:

    from /home/tglx/work/kernel/autoqa/linux-2.6-tip/arch/xtensa/k
    ernel/asm-offsets.c:20:
    /home/tglx/work/kernel/autoqa/linux-2.6-tip/include/linux/cpumask.h:109:
    error:
    'CONFIG_NR_CPUS' undeclared here (not in a function)

    powerpc mpc5200_defconfig:

    http://www.tglx.de/autoqa-logs/000140-0008-0014.log

    kernel/asm-offsets.c:22:
    /home/tglx/work/kernel/autoqa/linux-2.6-tip/include/linux/mm.h:922:5:
    warning: "CONFIG_NR_CPUS" is not defined
    make[2]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1
    make[1]: *** [prepare0] Error 2

    sparc32 defconfig:

    http://www.tglx.de/autoqa-logs/000140-0008-0020.log

    /home/tglx/work/kernel/autoqa/linux-2.6-tip/arch/sparc/kernel/asm-offsets.c:13:
    /home/tglx/work/kernel/autoqa/linux-2.6-tip/include/linux/cpumask.h:109:
    error: 'CONFIG_NR_CPUS' undeclared here (not in a function)

    powerpc ppc64_defconfig:

    http://www.tglx.de/autoqa-logs/000140-0008-0022.log

    /home/tglx/work/kernel/autoqa/linux-2.6-tip/arch/powerpc/platforms/cell/spu_bas
    e.c:117: error: implicit declaration of function '__cpus_setall'
    make[3]: *** [arch/powerpc/platforms/cell/spu_base.o] Error 1

    s390 defconfig:

    http://www.tglx.de/autoqa-logs/000140-0008-0025.log

    /home/tglx/work/kernel/autoqa/linux-2.6-tip/arch/s390/kernel/smp.c: In
    function '__smp_call_function_map':
    /home/tglx/work/kernel/autoqa/linux-2.6-tip/arch/s390/kernel/smp.c:120:
    error: request for member 'bits' in something not a structure or union

    it seems to me that this commit is massively borked:

    4a792c2: cpumask: make CONFIG_NR_CPUS always valid

    but some of the others seems to be suspect as well - there's at least 3
    different failure patterns.

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  17. Re: [bug #2] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


  18. Re: [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask

    Ingo Molnar wrote:
    > ok, the new cpumask code blew up in -tip testing, with various sorts of
    > slab corruptions during scheduler init:
    >

    ....
    Curious thing happens here. I created the tree as you suggested (branch tip/cpus4096-v2)
    and copied in your .config file. Running it through "silentoldconfig" (choosing only
    the defaults), I get the following changes. This makes me suspect that I'm not testing
    the same thing as you are...? Perhaps my git setup was not correct?

    git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    + git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git
    + branch tip/cpus4096-v2

    -CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
    -CONFIG_BROKEN_BOOT_ALLOWED4=y
    -CONFIG_BROKEN_BOOT_ALLOWED3=y
    -# CONFIG_BROKEN_BOOT_ALLOWED2 is not set
    -CONFIG_BROKEN_BOOT_EUROPE=y
    -CONFIG_BROKEN_BOOT_TITAN=y
    -CONFIG_LOCALVERSION=""
    +CONFIG_LOCALVERSION="-ingo-config-test-1023-1"
    -# CONFIG_SMP_SUPPORT is not set
    +CONFIG_SMP=y
    -# CONFIG_UP_WANTED_1 is not set
    -CONFIG_SMP=y
    -# CONFIG_X86_PTRACE_BTS is not set
    -CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
    -# CONFIG_DIRECT_GBPAGES is not set
    -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
    -CONFIG_CC_STACKPROTECTOR_ALL=y
    -CONFIG_CC_STACKPROTECTOR=y
    +# CONFIG_CMDLINE_OVERRIDE is not set
    +# CONFIG_NET_9P is not set
    +# CONFIG_MTD is not set
    +# CONFIG_IDE is not set
    +# CONFIG_SCSI_SAS_LIBSAS is not set
    +# CONFIG_SCSI_AIC94XX is not set
    +# CONFIG_SCSI_MVSAS is not set
    +# CONFIG_SCSI_DEBUG is not set
    +# CONFIG_I2O_CONFIG is not set
    -CONFIG_VORTEX=y
    +# CONFIG_MISDN is not set
    +# CONFIG_PHONE_IXJ is not set
    +# CONFIG_I2C_NFORCE2_S4985 is not set
    +# CONFIG_EUROTECH_WDT is not set
    +# CONFIG_MFD_WM8400 is not set
    +# CONFIG_MFD_WM8350_I2C is not set
    +# CONFIG_VIDEO_CX88 is not set
    +# CONFIG_FB_CIRRUS is not set
    +# CONFIG_FB_VGA16 is not set
    +# CONFIG_FB_RADEON is not set
    +# CONFIG_FB_VIRTUAL is not set
    +# CONFIG_FRAMEBUFFER_CONSOLE is not set
    +# CONFIG_USB_GADGET is not set
    +# CONFIG_STAGING is not set
    +# CONFIG_ECRYPT_FS is not set
    +# CONFIG_ROOT_NFS is not set
    -CONFIG_ALLOW_WARNINGS=y
    +# CONFIG_DEBUG_KOBJECT is not set
    +# CONFIG_DEBUG_INFO is not set
    -CONFIG_DEBUG_NOTIFIERS=y
    +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
    -CONFIG_HAVE_FUNCTION_TRACER=y
    +CONFIG_HAVE_FTRACE=y
    -
    -#
    -# Tracers
    -#
    -CONFIG_FUNCTION_TRACER=y
    +CONFIG_FTRACE=y
    +# CONFIG_KGDB_TESTS_ON_BOOT is not set
    +# CONFIG_DIRECT_GBPAGES is not set
    +# CONFIG_SECURITY_ROOTPLUG is not set
    +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
    +# CONFIG_SECURITY_SMACK is not set
    -CONFIG_FORCE_SUCCESSFUL_BUILD=y
    -CONFIG_FORCE_MINIMAL_CONFIG=y
    -CONFIG_FORCE_MINIMAL_CONFIG_64=y
    -CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y


    >
    > i suspect it's due to:
    >
    > 01b8bd9: sched: cpumask: get rid of boutique sched.c allocations, use cpumask_va
    >
    > note, CONFIG_MAXSMP is set in the .config, so this is with the dynamic
    > cpumask_t.
    >
    > Ingo
    >


    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  19. Re: [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask


    * Ingo Molnar wrote:

    > i've attached the config that will build and boot with the
    > tip/cpus4096-v2 branch.
    >
    > (I'm now double-checking whether it reproduces those slab corruption
    > messages.)


    yes, it still does that slab corruption message, see the bootlog below.

    Ingo

    [ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Linux version 2.6.27-06574-g8c86407 (mingo@dione) (gcc version 4.2.3) #45103 SMP Thu Oct 23 16:24:51 CEST 2008
    [ 0.000000] Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200,keep console=tty debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 idle=poll panic=1
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] console [earlyser0] enabled
    [ 0.000000] debug: ignoring loglevel setting.
    [ 0.000000] using polling idle threads.
    [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x3ffffffff
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] init_memory_mapping
    [ 0.000000] 0000000000 - 003fff0000 page 4k
    [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 233e000-2540000
    [ 0.000000] last_map_addr: 3fff0000 end: 3fff0000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000003fff0000
    [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
    [ 0.000000] NODE_DATA [0000000000008000 - 000000000003cfff]
    [ 0.000000] bootmap [000000000003d000 - 0000000000044fff] pages 8
    [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003fff0000]
    [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    [ 0.000000] #2 [0000200000 - 000233d950] TEXT DATA BSS ==> [0000200000 - 000233d950]
    [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    [ 0.000000] #4 [000233e000 - 000253e000] PGTABLE ==> [000233e000 - 000253e000]
    [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
    [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
    [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
    [ 0.000000] found SMP MP-table at [ffff8800000f5680] 000f5680
    [ 0.000000] [ffffe20000000000-ffffe200017fffff] PMD -> [ffff880002800000-ffff880003ffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000000 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00100000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000000 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fff0
    [ 0.000000] On node 0 totalpages: 262031
    [ 0.000000] DMA zone: 96 pages used for memmap
    [ 0.000000] DMA zone: 101 pages reserved
    [ 0.000000] DMA zone: 3802 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 6048 pages used for memmap
    [ 0.000000] DMA32 zone: 251984 pages, LIFO batch:31
    [ 0.000000] Normal zone: 0 pages used for memmap
    [ 0.000000] Movable zone: 0 pages used for memmap
    [ 0.000000] Intel MultiProcessor Specification v1.4
    [ 0.000000] MPTABLE: OEM ID: OEM00000
    [ 0.000000] MPTABLE: Product ID: PROD00000000
    [ 0.000000] MPTABLE: APIC at: 0xFEE00000
    [ 0.000000] Processor #0 (Bootup-CPU)
    [ 0.000000] Processor #1
    [ 0.000000] Bus #0 is PCI
    [ 0.000000] Bus #1 is PCI
    [ 0.000000] Bus #2 is PCI
    [ 0.000000] Bus #3 is PCI
    [ 0.000000] Bus #4 is PCI
    [ 0.000000] Bus #5 is PCI
    [ 0.000000] Bus #6 is ISA
    [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
    [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
    [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
    [ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
    [ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
    [ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
    [ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
    [ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
    [ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
    [ 0.000000] Processors: 2
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000)
    [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
    [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
    [ 0.000000] PERCPU: Allocating 1646592 bytes of per cpu data
    [ 0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] per cpu data for cpu0 on node0 at 0000000002642000
    [ 0.000000] per cpu data for cpu1 on node0 at 0000000004000000
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255786
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200,keep console=tty debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 idle=poll panic=1
    [ 0.000000] debug: sysrq always enabled.
    [ 0.000000] Initializing CPU#0
    [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2010.301 MHz processor.
    [ 0.004000] spurious 8259A interrupt: IRQ7.
    [ 0.004000] Console: colour VGA+ 80x25
    [ 0.004000] console [tty0] enabled
    [ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    [ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8
    [ 0.004000] ... MAX_LOCK_DEPTH: 48
    [ 0.004000] ... MAX_LOCKDEP_KEYS: 8191
    [ 0.004000] ... CLASSHASH_SIZE: 4096
    [ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192
    [ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384
    [ 0.004000] ... CHAINHASH_SIZE: 8192
    [ 0.004000] memory used by lock dependency info: 4095 kB
    [ 0.004000] per task-struct memory footprint: 2688 bytes
    [ 0.004000] Checking aperture...
    [ 0.004000] No AGP bridge found
    [ 0.004000] Node 0: aperture @ 20000000 size 32 MB
    [ 0.004000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.004000] Memory: 983380k/1048512k available (6008k kernel code, 64744k reserved, 8753k data, 2096k init)
    [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.60 BogoMIPS (lpj=8041204)
    [ 0.012147] Security Framework initialized
    [ 0.016024] SELinux: Initializing.
    [ 0.020108] SELinux: Starting in permissive mode
    [ 0.024562] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.028916] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.032375] Mount-cache hash table entries: 256
    [ 0.040538] Initializing cgroup subsys debug
    [ 0.044006] Initializing cgroup subsys devices
    [ 0.048007] Initializing cgroup subsys freezer
    [ 0.052030] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [ 0.056005] CPU: L2 Cache: 512K (64 bytes/line)
    [ 0.060005] CPU 0/0x0 -> Node 0
    [ 0.064005] tseg: 0000000000
    [ 0.066871] CPU: Physical Processor ID: 0
    [ 0.068004] CPU: Processor Core ID: 0
    [ 0.072010] numa_add_cpu cpu 0 node 0: mask now 0
    [ 0.076037] ftrace: converting mcount calls to 0f 1f 44 00 00
    [ 0.080014] ftrace: allocating 16064 hash entries in 126 pages
    [ 0.104309] Setting APIC routing to flat
    [ 0.108009] enabled ExtINT on CPU#0
    [ 0.112065] ExtINT not setup in hardware but reported by MP table
    [ 0.116115] ENABLING IO-APIC IRQs
    [ 0.120004] init IO_APIC IRQs
    [ 0.124005] 2-0 (apicid-pin) not connected
    [ 0.128016] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
    [ 0.132012] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
    [ 0.136011] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
    [ 0.140000] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
    [ 0.140000] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
    [ 0.140000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    [ 0.140000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
    [ 0.140000] ...trying to set up timer (IRQ0) through the 8259A ...
    [ 0.140000] ..... (found apic 0 pin 0) ...
    [ 0.183561] ....... works.
    [ 0.184003] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
    [ 0.192004] Using local APIC timer interrupts.
    [ 0.192004] calibrating APIC timer ...
    [ 0.200000] ... lapic delta = 1256518
    [ 0.200000] ..... delta 1256518
    [ 0.200000] ..... mult: 53963664
    [ 0.200000] ..... calibration result: 804171
    [ 0.200000] ..... CPU clock speed is 2010.1718 MHz.
    [ 0.200000] ..... host bus clock speed is 201.0171 MHz.
    [ 0.200000] ... verify APIC timer
    [ 0.311432] ... jiffies delta = 25
    [ 0.312003] ... jiffies result ok
    [ 0.316023] calling migration_init+0x0/0x60 @ 1
    [ 0.320167] initcall migration_init+0x0/0x60 returned 1 after 0 usecs
    [ 0.324005] initcall migration_init+0x0/0x60 returned with error code 1
    [ 0.328005] calling spawn_ksoftirqd+0x0/0x60 @ 1
    [ 0.332087] initcall spawn_ksoftirqd+0x0/0x60 returned 0 after 0 usecs
    [ 0.336008] calling init_call_single_data+0x0/0x80 @ 1
    [ 0.340006] initcall init_call_single_data+0x0/0x80 returned 0 after 0 usecs
    [ 0.344005] calling spawn_softlockup_task+0x0/0x80 @ 1
    [ 0.348071] initcall spawn_softlockup_task+0x0/0x80 returned 0 after 0 usecs
    [ 0.352005] calling relay_init+0x0/0x20 @ 1
    [ 0.356008] initcall relay_init+0x0/0x20 returned 0 after 0 usecs
    [ 0.360004] calling tracer_alloc_buffers+0x0/0x1f0 @ 1
    [ 0.370658] Testing tracer nop: PASSED
    [ 0.372703] initcall tracer_alloc_buffers+0x0/0x1f0 returned 0 after 7812 usecs
    [ 0.376394] lockdep: fixing up alternatives.
    [ 0.380146] Booting processor 1 APIC 0x1 ip 0x6000
    [ 0.004000] Initializing CPU#1
    [ 0.004000] masked ExtINT on CPU#1
    [ 0.004000] Calibrating delay using timer specific routine.. 4020.87 BogoMIPS (lpj=8041750)
    [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
    [ 0.004000] CPU 1/0x1 -> Node 0
    [ 0.004000] CPU: Physical Processor ID: 0
    [ 0.004000] CPU: Processor Core ID: 1
    [ 0.004000] numa_add_cpu cpu 1 node 0: mask now 0-1
    [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    [ 0.476391] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
    [ 0.488041] Brought up 2 CPUs
    [ 0.490944] Total of 2 processors activated (8041.47 BogoMIPS).
    [ 0.492070] Testing NMI watchdog ... OK.
    [ 0.576156] CPU0 attaching sched-domain:
    [ 0.580007] domain 0: span 0-1 level CPU
    [ 0.584003] groups: 0 1
    [ 0.586595] domain 1: span 0-1 level NODE
    [ 0.589815] groups: 0-1
    [ 0.592541] CPU1 attaching sched-domain:
    [ 0.596010] domain 0: span 0-1 level CPU
    [ 0.600003] groups: 1 0
    [ 0.604003] domain 1: span 0-1 level NODE
    [ 0.608015] groups: 0-1
    [ 0.610691] ================================================== ===========================
    [ 0.612000] BUG kmalloc-8: Wrong object count. Counter is 15 but counted were 50
    [ 0.612000] -----------------------------------------------------------------------------
    [ 0.612000]
    [ 0.612000] INFO: Slab 0xffffe200017dac80 objects=51 used=15 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    [ 0.612000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
    [ 0.612000] Call Trace:
    [ 0.612000] [] slab_err+0xa0/0xb0
    [ 0.612000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.612000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.612000] [] ? cpu_attach_domain+0x172/0x6b0
    [ 0.612000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.612000] [] on_freelist+0x197/0x240
    [ 0.612000] [] __slab_free+0x1a6/0x310
    [ 0.612000] [] ? free_cpumask_var+0x9/0x10
    [ 0.612000] [] kfree+0xb7/0x140
    [ 0.612000] [] ? free_cpumask_var+0x9/0x10
    [ 0.612000] [] free_cpumask_var+0x9/0x10
    [ 0.612000] [] __build_sched_domains+0x49c/0xd30
    [ 0.612000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.612000] [] sched_init_smp+0xba/0x2b0
    [ 0.612000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.612000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.612000] [] ? check_object+0x238/0x270
    [ 0.612000] [] ? init_object+0x54/0x90
    [ 0.612000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.612000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.612000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.612000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.612000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.612000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    [ 0.612000] [] kernel_init+0x176/0x240
    [ 0.612000] [] child_rip+0xa/0x11
    [ 0.612000] [] ? restore_args+0x0/0x30
    [ 0.612000] [] ? kernel_init+0x0/0x240
    [ 0.612000] [] ? child_rip+0x0/0x11
    [ 0.612000] FIX kmalloc-8: Object count adjusted.
    [ 0.612000] ================================================== ===========================
    [ 0.612000] BUG kmalloc-8: Redzone overwritten
    [ 0.612000] -----------------------------------------------------------------------------
    [ 0.612000]
    [ 0.612000] INFO: 0xffff88003f9cc418-0xffff88003f9cc41f. First byte 0x0 instead of 0xcc
    [ 0.612000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    [ 0.612000] INFO: Object 0xffff88003f9cc410 @offset=1040 fp=0x0000000000000000
    [ 0.612000]
    [ 0.612000] Bytes b4 0xffff88003f9cc400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    [ 0.612000] Object 0xffff88003f9cc410: 00 00 00 00 00 00 00 00 ........
    [ 0.612000] Redzone 0xffff88003f9cc418: 00 00 00 00 00 00 00 00 ........
    [ 0.612000] Padding 0xffff88003f9cc458: 00 00 00 00 00 00 00 00 ........
    [ 0.612000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
    [ 0.612000] Call Trace:
    [ 0.612000] [] print_trailer+0xfc/0x160
    [ 0.612000] [] check_bytes_and_report+0xb8/0xe0
    [ 0.612000] [] check_object+0x6a/0x270
    [ 0.612000] [] __slab_free+0x208/0x310
    [ 0.612000] [] ? free_cpumask_var+0x9/0x10
    [ 0.612000] [] kfree+0xb7/0x140
    [ 0.612000] [] ? free_cpumask_var+0x9/0x10
    [ 0.612000] [] free_cpumask_var+0x9/0x10
    [ 0.612000] [] __build_sched_domains+0x49c/0xd30
    [ 0.612000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.612000] [] sched_init_smp+0xba/0x2b0
    [ 0.612000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.612000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.612000] [] ? check_object+0x238/0x270
    [ 0.612000] [] ? init_object+0x54/0x90
    [ 0.612000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.612000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.612000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.612000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.612000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.612000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    [ 0.612000] [] kernel_init+0x176/0x240
    [ 0.612000] [] child_rip+0xa/0x11
    [ 0.612000] [] ? restore_args+0x0/0x30
    [ 0.612000] [] ? kernel_init+0x0/0x240
    [ 0.612000] [] ? child_rip+0x0/0x11
    [ 0.612000] FIX kmalloc-8: Restoring 0xffff88003f9cc418-0xffff88003f9cc41f=0xcc
    [ 0.612000]
    [ 0.612004] ================================================== ===========================
    [ 0.616000] BUG kmalloc-8: Redzone overwritten
    [ 0.616000] -----------------------------------------------------------------------------
    [ 0.616000]
    [ 0.616000] INFO: 0xffff88003f9cc3c8-0xffff88003f9cc3cf. First byte 0x0 instead of 0xcc
    [ 0.616000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    [ 0.616000] INFO: Object 0xffff88003f9cc3c0 @offset=960 fp=0x0000000000000000
    [ 0.616000]
    [ 0.616000] Bytes b4 0xffff88003f9cc3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    [ 0.616000] Object 0xffff88003f9cc3c0: 00 00 00 00 00 00 00 00 ........
    [ 0.616000] Redzone 0xffff88003f9cc3c8: 00 00 00 00 00 00 00 00 ........
    [ 0.616000] Padding 0xffff88003f9cc408: 00 00 00 00 00 00 00 00 ........
    [ 0.616000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
    [ 0.616000] Call Trace:
    [ 0.616000] [] print_trailer+0xfc/0x160
    [ 0.616000] [] check_bytes_and_report+0xb8/0xe0
    [ 0.616000] [] check_object+0x6a/0x270
    [ 0.616000] [] __slab_free+0x208/0x310
    [ 0.616000] [] ? free_cpumask_var+0x9/0x10
    [ 0.616000] [] kfree+0xb7/0x140
    [ 0.616000] [] ? free_cpumask_var+0x9/0x10
    [ 0.616000] [] free_cpumask_var+0x9/0x10
    [ 0.616000] [] __build_sched_domains+0x4a5/0xd30
    [ 0.616000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.616000] [] sched_init_smp+0xba/0x2b0
    [ 0.616000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.616000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.616000] [] ? check_object+0x238/0x270
    [ 0.616000] [] ? init_object+0x54/0x90
    [ 0.616000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.616000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.616000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.616000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.616000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.616000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    [ 0.616000] [] kernel_init+0x176/0x240
    [ 0.616000] [] child_rip+0xa/0x11
    [ 0.616000] [] ? restore_args+0x0/0x30
    [ 0.616000] [] ? kernel_init+0x0/0x240
    [ 0.616000] [] ? child_rip+0x0/0x11
    [ 0.616000] FIX kmalloc-8: Restoring 0xffff88003f9cc3c8-0xffff88003f9cc3cf=0xcc
    [ 0.616000]
    [ 0.616004] ================================================== ===========================
    [ 0.620000] BUG kmalloc-8: Redzone overwritten
    [ 0.620000] -----------------------------------------------------------------------------
    [ 0.620000]
    [ 0.620000] INFO: 0xffff88003f9cc378-0xffff88003f9cc37f. First byte 0x0 instead of 0xcc
    [ 0.620000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    [ 0.620000] INFO: Object 0xffff88003f9cc370 @offset=880 fp=0x0000000000000000
    [ 0.620000]
    [ 0.620000] Bytes b4 0xffff88003f9cc360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    [ 0.620000] Object 0xffff88003f9cc370: 00 00 00 00 00 00 00 00 ........
    [ 0.620000] Redzone 0xffff88003f9cc378: 00 00 00 00 00 00 00 00 ........
    [ 0.620000] Padding 0xffff88003f9cc3b8: 00 00 00 00 00 00 00 00 ........
    [ 0.620000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
    [ 0.620000] Call Trace:
    [ 0.620000] [] print_trailer+0xfc/0x160
    [ 0.620000] [] check_bytes_and_report+0xb8/0xe0
    [ 0.620000] [] check_object+0x6a/0x270
    [ 0.620000] [] __slab_free+0x208/0x310
    [ 0.620000] [] ? free_cpumask_var+0x9/0x10
    [ 0.620000] [] kfree+0xb7/0x140
    [ 0.620000] [] ? free_cpumask_var+0x9/0x10
    [ 0.620000] [] free_cpumask_var+0x9/0x10
    [ 0.620000] [] __build_sched_domains+0x10d/0xd30
    [ 0.620000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.620000] [] sched_init_smp+0xba/0x2b0
    [ 0.620000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.620000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.620000] [] ? check_object+0x238/0x270
    [ 0.620000] [] ? init_object+0x54/0x90
    [ 0.620000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.620000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.620000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.620000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.620000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.620000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    [ 0.620000] [] kernel_init+0x176/0x240
    [ 0.620000] [] child_rip+0xa/0x11
    [ 0.620000] [] ? restore_args+0x0/0x30
    [ 0.620000] [] ? kernel_init+0x0/0x240
    [ 0.620000] [] ? child_rip+0x0/0x11
    [ 0.620000] FIX kmalloc-8: Restoring 0xffff88003f9cc378-0xffff88003f9cc37f=0xcc
    [ 0.620000]
    [ 0.620004] ================================================== ===========================
    [ 0.624000] BUG kmalloc-8: Redzone overwritten
    [ 0.624000] -----------------------------------------------------------------------------
    [ 0.624000]
    [ 0.624000] INFO: 0xffff88003f9cc328-0xffff88003f9cc32f. First byte 0x0 instead of 0xcc
    [ 0.624000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    [ 0.624000] INFO: Object 0xffff88003f9cc320 @offset=800 fp=0x0000000000000000
    [ 0.624000]
    [ 0.624000] Bytes b4 0xffff88003f9cc310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    [ 0.624000] Object 0xffff88003f9cc320: 00 00 00 00 00 00 00 00 ........
    [ 0.624000] Redzone 0xffff88003f9cc328: 00 00 00 00 00 00 00 00 ........
    [ 0.624000] Padding 0xffff88003f9cc368: 00 00 00 00 00 00 00 00 ........
    [ 0.624000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
    [ 0.624000] Call Trace:
    [ 0.624000] [] print_trailer+0xfc/0x160
    [ 0.624000] [] check_bytes_and_report+0xb8/0xe0
    [ 0.624000] [] check_object+0x6a/0x270
    [ 0.624000] [] __slab_free+0x208/0x310
    [ 0.624000] [] ? free_cpumask_var+0x9/0x10
    [ 0.624000] [] kfree+0xb7/0x140
    [ 0.624000] [] ? free_cpumask_var+0x9/0x10
    [ 0.624000] [] free_cpumask_var+0x9/0x10
    [ 0.624000] [] __build_sched_domains+0xed/0xd30
    [ 0.624000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.624000] [] sched_init_smp+0xba/0x2b0
    [ 0.624000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.624000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.624000] [] ? check_object+0x238/0x270
    [ 0.624000] [] ? init_object+0x54/0x90
    [ 0.624000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.624000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.624000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.624000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.624000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.624000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    [ 0.624000] [] kernel_init+0x176/0x240
    [ 0.624000] [] child_rip+0xa/0x11
    [ 0.624000] [] ? restore_args+0x0/0x30
    [ 0.624000] [] ? kernel_init+0x0/0x240
    [ 0.624000] [] ? child_rip+0x0/0x11
    [ 0.624000] FIX kmalloc-8: Restoring 0xffff88003f9cc328-0xffff88003f9cc32f=0xcc
    [ 0.624000]
    [ 0.624004] ================================================== ===========================
    [ 0.628000] BUG kmalloc-8: Redzone overwritten
    [ 0.628000] -----------------------------------------------------------------------------
    [ 0.628000]
    [ 0.628000] INFO: 0xffff88003f9cc2d8-0xffff88003f9cc2df. First byte 0x0 instead of 0xcc
    [ 0.628000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    [ 0.628000] INFO: Object 0xffff88003f9cc2d0 @offset=720 fp=0x0000000000000000
    [ 0.628000]
    [ 0.628000] Bytes b4 0xffff88003f9cc2c0: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
    [ 0.628000] Object 0xffff88003f9cc2d0: 03 00 00 00 00 00 00 00 ........
    [ 0.628000] Redzone 0xffff88003f9cc2d8: 00 00 00 00 00 00 00 00 ........
    [ 0.628000] Padding 0xffff88003f9cc318: 00 00 00 00 00 00 00 00 ........
    [ 0.628000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
    [ 0.628000] Call Trace:
    [ 0.628000] [] print_trailer+0xfc/0x160
    [ 0.628000] [] check_bytes_and_report+0xb8/0xe0
    [ 0.628000] [] check_object+0x6a/0x270
    [ 0.628000] [] __slab_free+0x208/0x310
    [ 0.628000] [] ? free_cpumask_var+0x9/0x10
    [ 0.628000] [] kfree+0xb7/0x140
    [ 0.628000] [] ? free_cpumask_var+0x9/0x10
    [ 0.628000] [] free_cpumask_var+0x9/0x10
    [ 0.628000] [] __build_sched_domains+0xcd/0xd30
    [ 0.628000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.628000] [] sched_init_smp+0xba/0x2b0
    [ 0.628000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.628000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.628000] [] ? check_object+0x238/0x270
    [ 0.628000] [] ? init_object+0x54/0x90
    [ 0.628000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.628000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.628000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.628000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.628000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.628000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    [ 0.628000] [] kernel_init+0x176/0x240
    [ 0.628000] [] child_rip+0xa/0x11
    [ 0.628000] [] ? restore_args+0x0/0x30
    [ 0.628000] [] ? kernel_init+0x0/0x240
    [ 0.628000] [] ? child_rip+0x0/0x11
    [ 0.628000] FIX kmalloc-8: Restoring 0xffff88003f9cc2d8-0xffff88003f9cc2df=0xcc
    [ 0.628000]
    [ 0.628025] ================================================== ===========================
    [ 0.632000] BUG kmalloc-8: Redzone overwritten
    [ 0.632000] -----------------------------------------------------------------------------
    [ 0.632000]
    [ 0.632000] INFO: 0xffff88003f9cc4b8-0xffff88003f9cc4bf. First byte 0x0 instead of 0xbb
    [ 0.632000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
    [ 0.632000] INFO: Object 0xffff88003f9cc4b0 @offset=1200 fp=0x0000000000000000
    [ 0.632000]
    [ 0.632000] Bytes b4 0xffff88003f9cc4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    [ 0.632000] Object 0xffff88003f9cc4b0: 00 00 00 00 00 00 00 00 ........
    [ 0.632000] Redzone 0xffff88003f9cc4b8: 00 00 00 00 00 00 00 00 ........
    [ 0.632000] Padding 0xffff88003f9cc4f8: 00 00 00 00 00 00 00 00 ........
    [ 0.632000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
    [ 0.632000] Call Trace:
    [ 0.632000] [] print_trailer+0xfc/0x160
    [ 0.632000] [] check_bytes_and_report+0xb8/0xe0
    [ 0.632000] [] check_object+0x6a/0x270
    [ 0.632000] [] __slab_alloc+0x37c/0x440
    [ 0.632000] [] ? register_sched_domain_sysctl+0xce/0x470
    [ 0.632000] [] ? mark_held_locks+0x8a/0xb0
    [ 0.632000] [] ? sd_alloc_ctl_entry+0x2a/0x40
    [ 0.632000] [] ? register_sched_domain_sysctl+0xce/0x470
    [ 0.632000] [] __kmalloc_track_caller+0x106/0x110
    [ 0.632000] [] kstrdup+0x45/0x120
    [ 0.632000] [] register_sched_domain_sysctl+0xce/0x470
    [ 0.632000] [] sched_init_smp+0xbf/0x2b0
    [ 0.632000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.632000] [] ? check_bytes_and_report+0x3d/0xe0
    [ 0.632000] [] ? check_object+0x238/0x270
    [ 0.632000] [] ? init_object+0x54/0x90
    [ 0.632000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.632000] [] ? trace_hardirqs_on_caller+0xcf/0x160
    [ 0.632000] [] ? trace_hardirqs_on+0xd/0x10
    [ 0.632000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.632000] [] ? check_nmi_watchdog+0x204/0x260
    [ 0.632000] [] ? native_smp_cpus_done+0x1a6/0x2b0
    [ 0.632000] [] kernel_init+0x176/0x240
    [ 0.632000] [] child_rip+0xa/0x11
    [ 0.632000] [] ? restore_args+0x0/0x30
    [ 0.632000] [] ? kernel_init+0x0/0x240
    [ 0.632000] [] ? child_rip+0x0/0x11
    [ 0.632000] FIX kmalloc-8: Restoring 0xffff88003f9cc4b8-0xffff88003f9cc4bf=0xbb
    [ 0.632000]
    [ 0.632000] FIX kmalloc-8: Marking all objects used
    [ 0.638221] calling init_cpufreq_transition_notifier_list+0x0/0x20 @ 1
    [ 0.640021] initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 usecs
    [ 0.644005] calling net_ns_init+0x0/0x180 @ 1
    [ 0.648003] net_namespace: 1416 bytes
    [ 0.652037] initcall net_ns_init+0x0/0x180 returned 0 after 3906 usecs
    [ 0.656006] calling cpufreq_tsc+0x0/0x40 @ 1
    [ 0.660005] initcall cpufreq_tsc+0x0/0x40 returned 0 after 0 usecs
    [ 0.664006] calling init_smp_flush+0x0/0x80 @ 1
    [ 0.668005] initcall init_smp_flush+0x0/0x80 returned 0 after 0 usecs
    [ 0.672011] calling sysctl_init+0x0/0x40 @ 1
    [ 0.676254] initcall sysctl_init+0x0/0x40 returned 0 after 0 usecs
    [ 0.680005] calling ksysfs_init+0x0/0xc0 @ 1
    [ 0.684215] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
    [ 0.688007] calling init_jiffies_clocksource+0x0/0x20 @ 1
    [ 0.692045] initcall init_jiffies_clocksource+0x0/0x20 returned 0 after 0 usecs
    [ 0.696005] calling filelock_init+0x0/0x30 @ 1
    [ 0.700018] initcall filelock_init+0x0/0x30 returned 0 after 0 usecs
    [ 0.704004] calling init_misc_binfmt+0x0/0x50 @ 1
    [ 0.708020] initcall init_misc_binfmt+0x0/0x50 returned 0 after 0 usecs
    [ 0.712004] calling init_script_binfmt+0x0/0x20 @ 1
    [ 0.716005] initcall init_script_binfmt+0x0/0x20 returned 0 after 0 usecs
    [ 0.720004] calling init_elf_binfmt+0x0/0x20 @ 1
    [ 0.724005] initcall init_elf_binfmt+0x0/0x20 returned 0 after 0 usecs
    [ 0.728004] calling init_compat_elf_binfmt+0x0/0x20 @ 1
    [ 0.732005] initcall init_compat_elf_binfmt+0x0/0x20 returned 0 after 0 usecs
    [ 0.736006] calling debugfs_init+0x0/0x60 @ 1
    [ 0.740013] initcall debugfs_init+0x0/0x60 returned 0 after 0 usecs
    [ 0.744004] calling securityfs_init+0x0/0x60 @ 1
    [ 0.748012] initcall securityfs_init+0x0/0x60 returned 0 after 0 usecs
    [ 0.752005] calling random32_init+0x0/0x100 @ 1
    [ 0.756005] initcall random32_init+0x0/0x100 returned 0 after 0 usecs
    [ 0.760004] calling cpufreq_core_init+0x0/0x90 @ 1
    [ 0.764005] initcall cpufreq_core_init+0x0/0x90 returned 0 after 0 usecs
    [ 0.768011] calling cpuidle_init+0x0/0x50 @ 1
    [ 0.772017] initcall cpuidle_init+0x0/0x50 returned 0 after 0 usecs
    [ 0.776004] calling sock_init+0x0/0x60 @ 1
    [ 0.780202] initcall sock_init+0x0/0x60 returned 0 after 0 usecs
    [ 0.784005] calling netpoll_init+0x0/0x50 @ 1
    [ 0.788004] initcall netpoll_init+0x0/0x50 returned 0 after 0 usecs
    [ 0.792004] calling netlink_proto_init+0x0/0x180 @ 1
    [ 0.796070] NET: Registered protocol family 16
    [ 0.800087] initcall netlink_proto_init+0x0/0x180 returned 0 after 3906 usecs
    [ 0.804005] calling bdi_class_init+0x0/0x50 @ 1
    [ 0.808397] initcall bdi_class_init+0x0/0x50 returned 0 after 0 usecs
    [ 0.812007] calling kobject_uevent_init+0x0/0x50 @ 1
    [ 0.816061] initcall kobject_uevent_init+0x0/0x50 returned 0 after 0 usecs
    [ 0.820005] calling pcibus_class_init+0x0/0x20 @ 1
    [ 0.824120] initcall pcibus_class_init+0x0/0x20 returned 0 after 0 usecs
    [ 0.828025] calling pci_driver_init+0x0/0x20 @ 1
    [ 0.836762] initcall pci_driver_init+0x0/0x20 returned 0 after 0 usecs
    [ 0.840006] calling lcd_class_init+0x0/0x50 @ 1
    [ 0.844105] initcall lcd_class_init+0x0/0x50 returned 0 after 0 usecs
    [ 0.852007] calling backlight_class_init+0x0/0x50 @ 1
    [ 0.859555] initcall backlight_class_init+0x0/0x50 returned 0 after 0 usecs
    [ 0.860007] calling tty_class_init+0x0/0x40 @ 1
    [ 0.864107] initcall tty_class_init+0x0/0x40 returned 0 after 0 usecs
    [ 0.872006] calling vtconsole_class_init+0x0/0xf0 @ 1
    [ 0.879054] initcall vtconsole_class_init+0x0/0xf0 returned 0 after 0 usecs
    [ 0.880007] calling register_node_type+0x0/0x70 @ 1
    [ 0.884192] initcall register_node_type+0x0/0x70 returned 0 after 0 usecs
    [ 0.888006] calling spi_init+0x0/0x90 @ 1
    [ 0.892131] initcall spi_init+0x0/0x90 returned 0 after 0 usecs
    [ 0.896007] calling amd_postcore_init+0x0/0x8b0 @ 1
    [ 0.904025] node 0 link 0: io port [1000, fffff]
    [ 0.908005] TOM: 0000000040000000 aka 1024M
    [ 0.912004] node 0 link 0: mmio [e0000000, efffffff]
    [ 0.916173] node 0 link 0: mmio [feb00000, fec0ffff]
    [ 0.920173] node 0 link 0: mmio [a0000, bffff]
    [ 0.924173] node 0 link 0: mmio [40000000, fed3ffff]
    [ 0.932173] bus: [00,ff] on node 0 link 0
    [ 0.936004] bus: 00 index 0 io port: [0, ffff]
    [ 0.940004] bus: 00 index 1 mmio: [40000000, fcffffffff]
    [ 0.944004] bus: 00 index 2 mmio: [feb00000, fec0ffff]
    [ 0.948004] bus: 00 index 3 mmio: [a0000, bffff]
    [ 0.956005] initcall amd_postcore_init+0x0/0x8b0 returned 0 after 50781 usecs
    [ 0.960007] calling arch_kdebugfs_init+0x0/0x1e0 @ 1
    [ 0.968085] initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 usecs
    [ 0.972006] calling mtrr_if_init+0x0/0x80 @ 1
    [ 0.976024] initcall mtrr_if_init+0x0/0x80 returned 0 after 0 usecs
    [ 0.984005] calling pci_arch_init+0x0/0x50 @ 1
    [ 0.988455] PCI: Using configuration type 1 for base access
    [ 0.996005] initcall pci_arch_init+0x0/0x50 returned 0 after 7812 usecs
    [ 1.000005] calling topology_init+0x0/0x90 @ 1
    [ 1.007938] initcall topology_init+0x0/0x90 returned 0 after 0 usecs
    [ 1.008008] calling mtrr_init_finialize+0x0/0x50 @ 1
    [ 1.012005] initcall mtrr_init_finialize+0x0/0x50 returned 0 after 0 usecs
    [ 1.016005] calling param_sysfs_init+0x0/0x240 @ 1
    [ 1.042760] initcall param_sysfs_init+0x0/0x240 returned 0 after 19531 usecs
    [ 1.048414] calling readahead_init+0x0/0x40 @ 1
    [ 1.055825] initcall readahead_init+0x0/0x40 returned 0 after 0 usecs
    [ 1.056008] calling init_bio+0x0/0x100 @ 1
    [ 1.060628] initcall init_bio+0x0/0x100 returned 0 after 0 usecs
    [ 1.064006] calling integrity_init+0x0/0x40 @ 1
    [ 1.068031] initcall integrity_init+0x0/0x40 returned 0 after 0 usecs
    [ 1.072006] calling cryptomgr_init+0x0/0x40 @ 1
    [ 1.080028] initcall cryptomgr_init+0x0/0x40 returned 0 after 0 usecs
    [ 1.084005] calling blk_settings_init+0x0/0x30 @ 1
    [ 1.088005] initcall blk_settings_init+0x0/0x30 returned 0 after 0 usecs
    [ 1.096004] calling blk_ioc_init+0x0/0x30 @ 1
    [ 1.100023] initcall blk_ioc_init+0x0/0x30 returned 0 after 0 usecs
    [ 1.108005] calling blk_softirq_init+0x0/0x80 @ 1
    [ 1.112007] initcall blk_softirq_init+0x0/0x80 returned 0 after 0 usecs
    [ 1.120004] calling genhd_device_init+0x0/0x60 @ 1
    [ 1.125496] initcall genhd_device_init+0x0/0x60 returned 0 after 0 usecs
    [ 1.128006] calling blk_dev_integrity_init+0x0/0x30 @ 1
    [ 1.132014] initcall blk_dev_integrity_init+0x0/0x30 returned 0 after 0 usecs
    [ 1.136007] calling pci_slot_init+0x0/0x50 @ 1
    [ 1.140021] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
    [ 1.144004] calling misc_init+0x0/0xb0 @ 1
    [ 1.148264] initcall misc_init+0x0/0xb0 returned 0 after 0 usecs
    [ 1.152008] calling cn_init+0x0/0x100 @ 1
    [ 1.156085] initcall cn_init+0x0/0x100 returned 0 after 0 usecs
    [ 1.160027] calling phy_init+0x0/0x40 @ 1
    [ 1.168239] initcall phy_init+0x0/0x40 returned 0 after 3906 usecs
    [ 1.172005] calling init_scsi+0x0/0xb0 @ 1
    [ 1.179477] SCSI subsystem initialized
    [ 1.180028] initcall init_scsi+0x0/0xb0 returned 0 after 3906 usecs
    [ 1.184005] calling ata_init+0x0/0x3c0 @ 1
    [ 1.188026] libata version 3.00 loaded.
    [ 1.192006] initcall ata_init+0x0/0x3c0 returned 0 after 3906 usecs
    [ 1.196005] calling usb_init+0x0/0xf0 @ 1
    [ 1.204319] usbcore: registered new interface driver usbfs
    [ 1.210092] usbcore: registered new interface driver hub
    [ 1.212283] usbcore: registered new device driver usb
    [ 1.220006] initcall usb_init+0x0/0xf0 returned 0 after 19531 usecs
    [ 1.224005] calling serio_init+0x0/0xb0 @ 1
    [ 1.231256] initcall serio_init+0x0/0xb0 returned 0 after 0 usecs
    [ 1.232064] calling gameport_init+0x0/0xb0 @ 1
    [ 1.236293] initcall gameport_init+0x0/0xb0 returned 0 after 0 usecs
    [ 1.240007] calling input_init+0x0/0x130 @ 1
    [ 1.244132] initcall input_init+0x0/0x130 returned 0 after 0 usecs
    [ 1.248034] calling hwmon_init+0x0/0x50 @ 1
    [ 1.255296] initcall hwmon_init+0x0/0x50 returned 0 after 0 usecs
    [ 1.256007] calling md_init+0x0/0xe0 @ 1
    [ 1.260065] initcall md_init+0x0/0xe0 returned 0 after 0 usecs
    [ 1.264004] calling pci_subsys_init+0x0/0x130 @ 1
    [ 1.268003] PCI: Probing PCI hardware
    [ 1.272033] PCI: Probing PCI hardware (bus 00)
    [ 1.280358] HPET not enabled in BIOS. You might try hpet=force boot option
    [ 1.284075] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
    [ 1.288027] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
    [ 1.292010] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
    [ 1.296020] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 1.300007] pci 0000:00:01.1: PME# disabled
    [ 1.304068] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff]
    [ 1.308049] pci 0000:00:02.0: supports D1 D2
    [ 1.312004] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.316006] pci 0000:00:02.0: PME# disabled
    [ 1.320067] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
    [ 1.324052] pci 0000:00:02.1: supports D1 D2
    [ 1.328004] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.332007] pci 0000:00:02.1: PME# disabled
    [ 1.336094] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
    [ 1.340010] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff]
    [ 1.344010] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff]
    [ 1.348037] pci 0000:00:04.0: supports D1 D2
    [ 1.352080] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
    [ 1.356129] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff]
    [ 1.360010] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007]
    [ 1.364042] pci 0000:00:0a.0: supports D1 D2
    [ 1.368004] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.372006] pci 0000:00:0a.0: PME# disabled
    [ 1.376081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.380006] pci 0000:00:0b.0: PME# disabled
    [ 1.384104] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.388006] pci 0000:00:0c.0: PME# disabled
    [ 1.392103] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.396006] pci 0000:00:0d.0: PME# disabled
    [ 1.400126] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.404006] pci 0000:00:0e.0: PME# disabled
    [ 1.412425] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff]
    [ 1.416011] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff]
    [ 1.420049] pci 0000:05:07.0: supports D1 D2
    [ 1.424004] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
    [ 1.428007] pci 0000:05:07.0: PME# disabled
    [ 1.432056] pci 0000:00:09.0: transparent bridge
    [ 1.436007] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
    [ 1.440007] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff]
    [ 1.448149] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
    [ 1.452011] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
    [ 1.456011] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff]
    [ 1.460030] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    [ 1.464015] pci 0000:01:00.0: supports D1 D2
    [ 1.468087] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff]
    [ 1.472054] pci 0000:01:00.1: supports D1 D2
    [ 1.476087] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff]
    [ 1.480006] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
    [ 1.484009] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
    [ 1.494439] pci 0000:00:00.0: default IRQ router [10de:005e]
    [ 1.500121] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3
    [ 1.504024] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11
    [ 1.508063] pci 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11
    [ 1.512011] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5
    [ 1.516326] initcall pci_subsys_init+0x0/0x130 returned 0 after 242187 usecs
    [ 1.520005] calling proto_init+0x0/0x30 @ 1
    [ 1.524015] initcall proto_init+0x0/0x30 returned 0 after 0 usecs
    [ 1.528005] calling net_dev_init+0x0/0x180 @ 1
    [ 1.536141] initcall net_dev_init+0x0/0x180 returned 0 after 3906 usecs
    [ 1.540005] calling neigh_init+0x0/0x80 @ 1
    [ 1.544005] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
    [ 1.548004] calling fib_rules_init+0x0/0xb0 @ 1
    [ 1.552007] initcall fib_rules_init+0x0/0xb0 returned 0 after 0 usecs
    [ 1.556005] calling pktsched_init+0x0/0xd0 @ 1
    [ 1.560036] initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
    [ 1.564005] calling tc_filter_init+0x0/0x50 @ 1
    [ 1.568005] initcall tc_filter_init+0x0/0x50 returned 0 after 0 usecs
    [ 1.572004] calling genl_init+0x0/0xe0 @ 1
    [ 1.592051] initcall genl_init+0x0/0xe0 returned 0 after 15625 usecs
    [ 1.596005] calling cipso_v4_init+0x0/0x90 @ 1
    [ 1.600026] initcall cipso_v4_init+0x0/0x90 returned 0 after 0 usecs
    [ 1.604005] calling atm_init+0x0/0xd0 @ 1
    [ 1.608007] NET: Registered protocol family 8
    [ 1.612004] NET: Registered protocol family 20
    [ 1.616141] initcall atm_init+0x0/0xd0 returned 0 after 7812 usecs
    [ 1.624008] calling wireless_nlevent_init+0x0/0x50 @ 1
    [ 1.628005] initcall wireless_nlevent_init+0x0/0x50 returned 0 after 0 usecs
    [ 1.636005] calling netlbl_init+0x0/0x90 @ 1
    [ 1.640003] NetLabel: Initializing
    [ 1.643376] NetLabel: domain hash size = 128
    [ 1.648003] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.652204] NetLabel: unlabeled traffic allowed by default
    [ 1.656006] initcall netlbl_init+0x0/0x90 returned 0 after 15625 usecs
    [ 1.664005] calling sysctl_init+0x0/0x4c @ 1
    [ 1.668009] initcall sysctl_init+0x0/0x4c returned 0 after 0 usecs
    [ 1.676006] calling pci_iommu_init+0x0/0x20 @ 1
    [ 1.681435] initcall pci_iommu_init+0x0/0x20 returned 0 after 0 usecs
    [ 1.684007] calling print_all_ICs+0x0/0x500 @ 1
    [ 1.688004]
    [ 1.688004] printing PIC contents
    [ 1.692006] ... PIC IMR: fffa
    [ 1.695031] ... PIC IRR: 0001
    [ 1.692006] Clocksource tsc unstable (delta = 120298514 ns)
    [ 1.696003] ... PIC ISR: 0001
    [ 1.699022] ... PIC ELCR: 0828
    [ 1.700005]
    [ 1.700005] printing local APIC contents on CPU#0/0:
    [ 1.704000] ... APIC ID: 00000000 (0)
    [ 1.704000] ... APIC VERSION: 00040010
    [ 1.704000] ... APIC TASKPRI: 00000000 (00)
    [ 1.704000] ... APIC ARBPRI: 000000e0 (e0)
    [ 1.704000] ... APIC PROCPRI: 00000000
    [ 1.704000] ... APIC LDR: 01000000
    [ 1.704000] ... APIC DFR: ffffffff
    [ 1.704000] ... APIC SPIV: 000001ff
    [ 1.704000] ... APIC ISR field:
    [ 1.704000] 0123456789abcdef0123456789abcdef
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] ... APIC TMR field:
    [ 1.704000] 0123456789abcdef0123456789abcdef
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] ... APIC IRR field:
    [ 1.704000] 0123456789abcdef0123456789abcdef
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000010000000000000000
    [ 1.704000] ... APIC ESR: 00000000
    [ 1.704000] ... APIC ICR: 000008fb
    [ 1.704000] ... APIC ICR2: 02000000
    [ 1.704000] ... APIC LVTT: 000200ef
    [ 1.704000] ... APIC LVTPC: 00000400
    [ 1.704000] ... APIC LVT0: 00010700
    [ 1.704000] ... APIC LVT1: 00000400
    [ 1.704000] ... APIC LVTERR: 000000fe
    [ 1.704000] ... APIC TMICT: 0000c454
    [ 1.704000] ... APIC TMCCT: 00003143
    [ 1.704000] ... APIC TDCR: 00000003
    [ 1.704000]
    [ 1.703997]
    [ 1.703997] printing local APIC contents on CPU#1/1:
    [ 1.704000] ... APIC ID: 01000000 (1)
    [ 1.704000] ... APIC VERSION: 00040010
    [ 1.704000] ... APIC TASKPRI: 00000000 (00)
    [ 1.704000] ... APIC ARBPRI: 000000e0 (e0)
    [ 1.704000] ... APIC PROCPRI: 00000000
    [ 1.704000] ... APIC LDR: 02000000
    [ 1.704000] ... APIC DFR: ffffffff
    [ 1.704000] ... APIC SPIV: 000001ff
    [ 1.704000] ... APIC ISR field:
    [ 1.704000] 0123456789abcdef0123456789abcdef
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] ... APIC TMR field:
    [ 1.704000] 0123456789abcdef0123456789abcdef
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] ... APIC IRR field:
    [ 1.704000] 0123456789abcdef0123456789abcdef
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000000000000000000000
    [ 1.704000] 00000000000000010000000000000000
    [ 1.704000] ... APIC ESR: 00000000
    [ 1.704000] ... APIC ICR: 00000000
    [ 1.704000] ... APIC ICR2: 00000000
    [ 1.704000] ... APIC LVTT: 000200ef
    [ 1.704000] ... APIC LVTPC: 00000400
    [ 1.704000] ... APIC LVT0: 00010700
    [ 1.704000] ... APIC LVT1: 00010400
    [ 1.704000] ... APIC LVTERR: 000000fe
    [ 1.704000] ... APIC TMICT: 0000c454
    [ 1.704000] ... APIC TMCCT: 00003865
    [ 1.704000] ... APIC TDCR: 00000003
    [ 1.704000]
    [ 1.907763] number of MP IRQ sources: 17.
    [ 1.908004] number of IO-APIC #2 registers: 24.
    [ 1.912004] testing the IO APIC.......................
    [ 1.916007]
    [ 1.917469] IO APIC #2......
    [ 1.920004] .... register #00: 00000000
    [ 1.924004] ....... : physical APIC id: 00
    [ 1.928004] ....... : Delivery Type: 0
    [ 1.932004] ....... : LTS : 0
    [ 1.936004] .... register #01: 00170011
    [ 1.940004] ....... : max redirection entries: 0017
    [ 1.944004] ....... : PRQ implemented: 0
    [ 1.948004] ....... : IO APIC version: 0011
    [ 1.952004] .... register #02: 00000000
    [ 1.956004] ....... : arbitration: 00
    [ 1.960004] .... IRQ redirection table:
    [ 1.964004] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
    [ 1.968006] 00 003 0 0 0 0 0 1 1 30
    [ 1.972006] 01 003 0 0 0 0 0 1 1 31
    [ 1.979205] 02 000 1 0 0 0 0 0 0 00
    [ 1.984006] 03 003 1 1 0 1 0 1 1 33
    [ 1.988006] 04 003 0 0 0 0 0 1 1 34
    [ 1.992006] 05 003 1 1 0 1 0 1 1 35
    [ 2.000012] 06 003 0 0 0 0 0 1 1 36
    [ 2.004006] 07 003 1 0 0 0 0 1 1 37
    [ 2.008006] 08 003 0 0 0 0 0 1 1 38
    [ 2.015204] 09 003 0 0 0 0 0 1 1 39
    [ 2.020006] 0a 003 0 0 0 0 0 1 1 3A
    [ 2.024006] 0b 003 1 1 0 1 0 1 1 3B
    [ 2.031204] 0c 003 0 0 0 0 0 1 1 3C
    [ 2.036006] 0d 003 0 0 0 0 0 1 1 3D
    [ 2.040006] 0e 003 0 0 0 0 0 1 1 3E
    [ 2.044006] 0f 003 0 0 0 0 0 1 1 3F
    [ 2.052005] 10 000 1 0 0 0 0 0 0 00
    [ 2.056006] 11 000 1 0 0 0 0 0 0 00
    [ 2.060006] 12 000 1 0 0 0 0 0 0 00
    [ 2.067204] 13 000 1 0 0 0 0 0 0 00
    [ 2.072006] 14 000 1 0 0 0 0 0 0 00
    [ 2.076006] 15 000 1 0 0 0 0 0 0 00
    [ 2.083204] 16 000 1 0 0 0 0 0 0 00
    [ 2.088006] 17 000 1 0 0 0 0 0 0 00
    [ 2.092003] IRQ to pin mappings:
    [ 2.096004] IRQ0 -> 0:0
    [ 2.098423] IRQ1 -> 0:1
    [ 2.100690] IRQ3 -> 0:3
    [ 2.104171] IRQ4 -> 0:4
    [ 2.106596] IRQ5 -> 0:5
    [ 2.108690] IRQ6 -> 0:6
    [ 2.111115] IRQ7 -> 0:7
    [ 2.112690] IRQ8 -> 0:8
    [ 2.116171] IRQ9 -> 0:9
    [ 2.118596] IRQ10 -> 0:10
    [ 2.120776] IRQ11 -> 0:11
    [ 2.123374] IRQ12 -> 0:12
    [ 2.124776] IRQ13 -> 0:13
    [ 2.128777] IRQ14 -> 0:14
    [ 2.131375] IRQ15 -> 0:15
    [ 2.132778] .................................... done.
    [ 2.136005] initcall print_all_ICs+0x0/0x500 returned 0 after 437500 usecs
    [ 2.140005] calling hpet_late_init+0x0/0xa0 @ 1
    [ 2.144005] initcall hpet_late_init+0x0/0xa0 returned -19 after 0 usecs
    [ 2.148005] calling init_kmmio+0x0/0x40 @ 1
    [ 2.152008] initcall init_kmmio+0x0/0x40 returned 0 after 0 usecs
    [ 2.156005] calling clocksource_done_booting+0x0/0x20 @ 1
    [ 2.160005] initcall clocksource_done_booting+0x0/0x20 returned 0 after 0 usecs
    [ 2.164005] calling ftrace_init_debugfs+0x0/0x130 @ 1
    [ 2.168119] initcall ftrace_init_debugfs+0x0/0x130 returned 0 after 0 usecs
    [ 2.172005] calling tracer_init_debugfs+0x0/0x350 @ 1
    [ 2.176246] initcall tracer_init_debugfs+0x0/0x350 returned 0 after 0 usecs
    [ 2.180006] calling init_pipe_fs+0x0/0x60 @ 1
    [ 2.184128] initcall init_pipe_fs+0x0/0x60 returned 0 after 0 usecs
    [ 2.188005] calling init_mnt_writers+0x0/0x90 @ 1
    [ 2.192006] initcall init_mnt_writers+0x0/0x90 returned 0 after 0 usecs
    [ 2.196005] calling eventpoll_init+0x0/0xa0 @ 1
    [ 2.200035] initcall eventpoll_init+0x0/0xa0 returned 0 after 0 usecs
    [ 2.204005] calling anon_inode_init+0x0/0x130 @ 1
    [ 2.208151] initcall anon_inode_init+0x0/0x130 returned 0 after 0 usecs
    [ 2.212006] calling chr_dev_init+0x0/0xe0 @ 1
    [ 2.216148] initcall chr_dev_init+0x0/0xe0 returned 0 after 0 usecs
    [ 2.224008] calling firmware_class_init+0x0/0x90 @ 1
    [ 2.230819] initcall firmware_class_init+0x0/0x90 returned 0 after 0 usecs
    [ 2.236006] calling loopback_init+0x0/0x20 @ 1
    [ 2.242955] initcall loopback_init+0x0/0x20 returned 0 after 0 usecs
    [ 2.244007] calling cpufreq_gov_performance_init+0x0/0x20 @ 1
    [ 2.248040] initcall cpufreq_gov_performance_init+0x0/0x20 returned 0 after 0 usecs
    [ 2.252004] calling pcibios_assign_resources+0x0/0x90 @ 1
    [ 2.256148] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
    [ 2.260006] pci 0000:00:09.0: IO window: 0xc000-0xcfff
    [ 2.264009] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff
    [ 2.268006] pci 0000:00:09.0: PREFETCH window: disabled
    [ 2.272010] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
    [ 2.276003] pci 0000:00:0b.0: IO window: disabled
    [ 2.280008] pci 0000:00:0b.0: MEM window: disabled
    [ 2.284013] pci 0000:00:0b.0: PREFETCH window: disabled
    [ 2.288010] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
    [ 2.292003] pci 0000:00:0c.0: IO window: disabled
    [ 2.296008] pci 0000:00:0c.0: MEM window: disabled
    [ 2.300006] pci 0000:00:0c.0: PREFETCH window: disabled
    [ 2.304009] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
    [ 2.308003] pci 0000:00:0d.0: IO window: disabled
    [ 2.312008] pci 0000:00:0d.0: MEM window: disabled
    [ 2.316006] pci 0000:00:0d.0: PREFETCH window: disabled
    [ 2.320016] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
    [ 2.324005] pci 0000:00:0e.0: IO window: 0xb000-0xbfff
    [ 2.328008] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff
    [ 2.332007] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
    [ 2.336018] pci 0000:00:09.0: setting latency timer to 64
    [ 2.340015] pci 0000:00:0b.0: setting latency timer to 64
    [ 2.344014] pci 0000:00:0c.0: setting latency timer to 64
    [ 2.348014] pci 0000:00:0d.0: setting latency timer to 64
    [ 2.352014] pci 0000:00:0e.0: setting latency timer to 64
    [ 2.356006] bus: 00 index 0 io port: [0x00-0xffff]
    [ 2.360004] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
    [ 2.364004] bus: 05 index 0 io port: [0xc000-0xcfff]
    [ 2.368004] bus: 05 index 1 mmio: [0xda000000-0xda0fffff]
    [ 2.372004] bus: 05 index 2 mmio: [0x0-0x0]
    [ 2.376004] bus: 05 index 3 io port: [0x00-0xffff]
    [ 2.380004] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff]
    [ 2.384004] bus: 04 index 0 mmio: [0x0-0x0]
    [ 2.388003] bus: 04 index 1 mmio: [0x0-0x0]
    [ 2.392003] bus: 04 index 2 mmio: [0x0-0x0]
    [ 2.396003] bus: 04 index 3 mmio: [0x0-0x0]
    [ 2.400003] bus: 03 index 0 mmio: [0x0-0x0]
    [ 2.404003] bus: 03 index 1 mmio: [0x0-0x0]
    [ 2.408003] bus: 03 index 2 mmio: [0x0-0x0]
    [ 2.412003] bus: 03 index 3 mmio: [0x0-0x0]
    [ 2.416003] bus: 02 index 0 mmio: [0x0-0x0]
    [ 2.420003] bus: 02 index 1 mmio: [0x0-0x0]
    [ 2.424003] bus: 02 index 2 mmio: [0x0-0x0]
    [ 2.428003] bus: 02 index 3 mmio: [0x0-0x0]
    [ 2.432004] bus: 01 index 0 io port: [0xb000-0xbfff]
    [ 2.436004] bus: 01 index 1 mmio: [0xd8000000-0xd9ffffff]
    [ 2.440004] bus: 01 index 2 mmio: [0xd0000000-0xd7ffffff]
    [ 2.444003] bus: 01 index 3 mmio: [0x0-0x0]
    [ 2.448005] initcall pcibios_assign_resources+0x0/0x90 returned 0 after 187500 usecs
    [ 2.452005] calling inet_init+0x0/0x210 @ 1
    [ 2.456065] NET: Registered protocol family 2
    [ 2.500400] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 2.509450] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    [ 2.514908] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
    [ 2.526408] TCP: Hash tables configured (established 131072 bind 65536)
    [ 2.528049] TCP reno registered
    [ 2.544460] initcall inet_init+0x0/0x210 returned 0 after 85937 usecs
    [ 2.548007] calling af_unix_init+0x0/0x70 @ 1
    [ 2.552022] NET: Registered protocol family 1
    [ 2.556044] initcall af_unix_init+0x0/0x70 returned 0 after 3906 usecs
    [ 2.560006] calling populate_rootfs+0x0/0xb0 @ 1
    [ 2.564925] initcall populate_rootfs+0x0/0xb0 returned 0 after 0 usecs
    [ 2.568007] calling i8259A_init_sysfs+0x0/0x30 @ 1
    [ 2.572146] initcall i8259A_init_sysfs+0x0/0x30 returned 0 after 0 usecs
    [ 2.580008] calling vsyscall_init+0x0/0x70 @ 1
    [ 2.584043] initcall vsyscall_init+0x0/0x70 returned 0 after 0 usecs
    [ 2.592005] calling sbf_init+0x0/0xe0 @ 1
    [ 2.596004] initcall sbf_init+0x0/0xe0 returned 0 after 0 usecs
    [ 2.600005] calling i8237A_init_sysfs+0x0/0x30 @ 1
    [ 2.607805] initcall i8237A_init_sysfs+0x0/0x30 returned 0 after 0 usecs
    [ 2.612007] calling add_rtc_cmos+0x0/0x40 @ 1
    [ 2.619009] platform rtc_cmos: registered platform RTC device (no PNP device found)
    [ 2.624007] initcall add_rtc_cmos+0x0/0x40 returned 0 after 7812 usecs
    [ 2.632006] calling cache_sysfs_init+0x0/0x70 @ 1
    [ 2.639506] initcall cache_sysfs_init+0x0/0x70 returned 0 after 0 usecs
    [ 2.640027] calling mce_init_device+0x0/0xa0 @ 1
    [ 2.644957] initcall mce_init_device+0x0/0xa0 returned 0 after 0 usecs
    [ 2.648007] calling periodic_mcheck_init+0x0/0x50 @ 1
    [ 2.652188] initcall periodic_mcheck_init+0x0/0x50 returned 0 after 0 usecs
    [ 2.656005] calling thermal_throttle_init_device+0x0/0x90 @ 1
    [ 2.660005] initcall thermal_throttle_init_device+0x0/0x90 returned 0 after 0 usecs
    [ 2.664004] calling ioapic_init_sysfs+0x0/0xd0 @ 1
    [ 2.668359] initcall ioapic_init_sysfs+0x0/0xd0 returned 0 after 0 usecs
    [ 2.672073] calling uv_ptc_init+0x0/0x80 @ 1
    [ 2.676005] initcall uv_ptc_init+0x0/0x80 returned 0 after 0 usecs
    [ 2.684004] calling uv_bau_init+0x0/0x670 @ 1
    [ 2.688004] initcall uv_bau_init+0x0/0x670 returned 0 after 0 usecs
    [ 2.696004] calling sgi_uv_sysfs_init+0x0/0xb0 @ 1
    [ 2.700018] initcall sgi_uv_sysfs_init+0x0/0xb0 returned 0 after 0 usecs
    [ 2.708005] calling audit_classes_init+0x0/0xb0 @ 1
    [ 2.712024] initcall audit_classes_init+0x0/0xb0 returned 0 after 0 usecs
    [ 2.716005] calling start_pageattr_test+0x0/0x50 @ 1
    [ 2.724819] initcall start_pageattr_test+0x0/0x50 returned 0 after 0 usecs
    [ 2.728005] calling aes_init+0x0/0x20 @ 1
    [ 2.732169] alg: cipher: Test 1 failed on encryption for aes-asm
    [ 2.740006] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
    [ 2.748064] initcall aes_init+0x0/0x20 returned 0 after 15625 usecs
    [ 2.752006] calling init_vdso_vars+0x0/0x220 @ 1
    [ 2.756020] initcall init_vdso_vars+0x0/0x220 returned 0 after 0 usecs
    [ 2.764005] calling ia32_binfmt_init+0x0/0x20 @ 1
    [ 2.768029] initcall ia32_binfmt_init+0x0/0x20 returned 0 after 0 usecs
    [ 2.776004] calling sysenter_setup+0x0/0x380 @ 1
    [ 2.780011] initcall sysenter_setup+0x0/0x380 returned 0 after 0 usecs
    [ 2.788005] calling init_sched_debug_procfs+0x0/0x30 @ 1
    [ 2.792022] initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 0 usecs
    [ 2.800005] calling ioresources_init+0x0/0x40 @ 1
    [ 2.804019] initcall ioresources_init+0x0/0x40 returned 0 after 0 usecs
    [ 2.812005] calling uid_cache_init+0x0/0x80 @ 1
    [ 2.816052] initcall uid_cache_init+0x0/0x80 returned 0 after 0 usecs
    [ 2.820005] calling init_posix_timers+0x0/0x110 @ 1
    [ 2.828028] initcall init_posix_timers+0x0/0x110 returned 0 after 0 usecs
    [ 2.832005] calling init_posix_cpu_timers+0x0/0xe0 @ 1
    [ 2.840005] initcall init_posix_cpu_timers+0x0/0xe0 returned 0 after 0 usecs
    [ 2.844005] calling nsproxy_cache_init+0x0/0x30 @ 1
    [ 2.848017] initcall nsproxy_cache_init+0x0/0x30 returned 0 after 0 usecs
    [ 2.856006] calling create_proc_profile+0x0/0x2f0 @ 1
    [ 2.860005] initcall create_proc_profile+0x0/0x2f0 returned 0 after 0 usecs
    [ 2.868005] calling timekeeping_init_device+0x0/0x30 @ 1
    [ 2.876488] initcall timekeeping_init_device+0x0/0x30 returned 0 after 0 usecs
    [ 2.880018] calling init_clocksource_sysfs+0x0/0x60 @ 1
    [ 2.889256] initcall init_clocksource_sysfs+0x0/0x60 returned 0 after 0 usecs
    [ 2.892041] calling init_timer_list_procfs+0x0/0x30 @ 1
    [ 2.896023] initcall init_timer_list_procfs+0x0/0x30 returned 0 after 0 usecs
    [ 2.900005] calling lockdep_proc_init+0x0/0x80 @ 1
    [ 2.904032] initcall lockdep_proc_init+0x0/0x80 returned 0 after 0 usecs
    [ 2.908005] calling futex_init+0x0/0xf0 @ 1
    [ 2.912047] initcall futex_init+0x0/0xf0 returned 0 after 0 usecs
    [ 2.916006] calling init_rttest+0x0/0x160 @ 1
    [ 2.925090] Initializing RT-Tester: OK
    [ 2.928042] initcall init_rttest+0x0/0x160 returned 0 after 7812 usecs
    [ 2.932005] calling proc_dma_init+0x0/0x30 @ 1
    [ 2.936014] initcall proc_dma_init+0x0/0x30 returned 0 after 0 usecs
    [ 2.940005] calling percpu_modinit+0x0/0x80 @ 1
    [ 2.944005] initcall percpu_modinit+0x0/0x80 returned 0 after 0 usecs
    [ 2.948005] calling kallsyms_init+0x0/0x30 @ 1
    [ 2.952012] initcall kallsyms_init+0x0/0x30 returned 0 after 0 usecs
    [ 2.956005] calling backtrace_regression_test+0x0/0x100 @ 1
    [ 2.960003] ====[ backtrace testing ]===========
    [ 2.964003] Testing a backtrace from process context.
    [ 2.968003] The following trace is a kernel self test and not a bug!
    [ 2.972005] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
    [ 2.976003] Call Trace:
    [ 2.978426] [] ? backtrace_regression_test+0x0/0x100
    [ 2.980005] [] backtrace_regression_test+0x3d/0x100
    [ 2.984005] [] ? jiffies_read+0x9/0x20
    [ 2.988005] [] ? getnstimeofday+0x3f/0xc0
    [ 2.992006] [] ? ktime_get_ts+0x4f/0x60
    [ 2.996005] [] ? backtrace_regression_test+0x0/0x100
    [ 3.000005] [] ? ktime_get+0x16/0x50
    [ 3.004005] [] do_one_initcall+0x40/0x180
    [ 3.008006] [] ? _spin_unlock+0x2b/0x40
    [ 3.012006] [] ? proc_register+0x11d/0x1e0
    [ 3.016005] [] ? create_proc_entry+0x5e/0xa0
    [ 3.020005] [] ? register_irq_proc+0xc6/0xe0
    [ 3.024006] [] kernel_init+0x1b3/0x240
    [ 3.028006] [] child_rip+0xa/0x11
    [ 3.032005] [] ? restore_args+0x0/0x30
    [ 3.036005] [] ? kernel_init+0x0/0x240
    [ 3.040005] [] ? child_rip+0x0/0x11
    [ 3.044003] Testing a backtrace from irq context.
    [ 3.048003] The following trace is a kernel self test and not a bug!
    [ 3.052015] Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.27-06574-g8c86407 #45103
    [ 3.056001] Call Trace:
    [ 3.058422] [] ? trace_hardirqs_on_caller+0x89/0x160
    [ 3.064003] [] backtrace_test_irq_callback+0xe/0x20
    [ 3.068004] [] tasklet_action+0x6c/0xf0
    [ 3.072003] [] __do_softirq+0x9d/0x180
    [ 3.076003] [] call_softirq+0x1c/0x40
    [ 3.080001] [] do_softirq+0x6a/0xb0
    [ 3.084003] [] ksoftirqd+0x85/0x100
    [ 3.088004] [] ? ksoftirqd+0x0/0x100
    [ 3.092003] [] kthread+0x53/0x80
    [ 3.096004] [] child_rip+0xa/0x11
    [ 3.100004] [] ? restore_args+0x0/0x30
    [ 3.104003] [] ? kthread+0x0/0x80
    [ 3.108003] [] ? child_rip+0x0/0x11
    [ 3.112015] Testing a saved backtrace.
    [ 3.116022] The following trace is a kernel self test and not a bug!
    [ 3.120006] [] save_stack_trace+0x2f/0x50
    [ 3.124003] [] backtrace_regression_test+0xdb/0x100
    [ 3.128003] [] do_one_initcall+0x40/0x180
    [ 3.132003] [] kernel_init+0x1b3/0x240
    [ 3.136003] [] child_rip+0xa/0x11
    [ 3.144010] [] 0xffffffffffffffff
    [ 3.148003] ====[ end of backtrace testing ]====
    [ 3.152005] initcall backtrace_regression_test+0x0/0x100 returned 0 after 187500 usecs
    [ 3.156005] calling pid_namespaces_init+0x0/0x30 @ 1
    [ 3.160027] initcall pid_namespaces_init+0x0/0x30 returned 0 after 0 usecs
    [ 3.164005] calling audit_init+0x0/0x180 @ 1
    [ 3.168004] audit: initializing netlink socket (disabled)
    [ 3.172078] type=2000 audit(1224773428.172:1): initialized
    [ 3.176014] initcall audit_init+0x0/0x180 returned 0 after 7812 usecs
    [ 3.184006] calling audit_tree_init+0x0/0x50 @ 1
    [ 3.188008] initcall audit_tree_init+0x0/0x50 returned 0 after 0 usecs
    [ 3.192005] calling init_kprobes+0x0/0x1d0 @ 1
    [ 3.208258] Kprobe smoke test started
    [ 3.262485] Kprobe smoke test passed successfully
    [ 3.264011] initcall init_kprobes+0x0/0x1d0 returned 0 after 66406 usecs
    [ 3.268006] calling utsname_sysctl_init+0x0/0x20 @ 1
    [ 3.272078] initcall utsname_sysctl_init+0x0/0x20 returned 0 after 0 usecs
    [ 3.276005] calling init_sched_switch_trace+0x0/0x50 @ 1
    [ 3.280009] Testing tracer sched_switch: PASSED
    [ 3.424596] initcall init_sched_switch_trace+0x0/0x50 returned 0 after 140625 usecs
    [ 3.428006] calling init_stack_trace+0x0/0x20 @ 1
    [ 3.432006] Testing tracer sysprof: PASSED
    [ 3.540592] initcall init_stack_trace+0x0/0x20 returned 0 after 105468 usecs
    [ 3.548006] calling init_function_trace+0x0/0x20 @ 1
    [ 3.552006] Testing tracer ftrace: PASSED
    [ 3.715685] Testing dynamic ftrace: PASSED
    [ 3.972897] initcall init_function_trace+0x0/0x20 returned 0 after 410156 usecs
    [ 3.980010] calling init_wakeup_tracer+0x0/0x20 @ 1
    [ 3.984007] Testing tracer wakeup: PASSED
    [ 4.304019] initcall init_wakeup_tracer+0x0/0x20 returned 0 after 312500 usecs
    [ 4.308006] calling stack_trace_init+0x0/0x90 @ 1
    [ 4.320030] initcall stack_trace_init+0x0/0x90 returned 0 after 3906 usecs
    [ 4.324007] calling init_mmio_trace+0x0/0x20 @ 1
    [ 4.328007] initcall init_mmio_trace+0x0/0x20 returned 0 after 0 usecs
    [ 4.336005] calling init_per_zone_pages_min+0x0/0x60 @ 1
    [ 4.340082] initcall init_per_zone_pages_min+0x0/0x60 returned 0 after 0 usecs
    [ 4.348005] calling pdflush_init+0x0/0x20 @ 1
    [ 4.355554] initcall pdflush_init+0x0/0x20 returned 0 after 0 usecs
    [ 4.356006] calling kswapd_init+0x0/0x70 @ 1
    [ 4.360084] initcall kswapd_init+0x0/0x70 returned 0 after 0 usecs
    [ 4.368005] calling setup_vmstat+0x0/0x50 @ 1
    [ 4.372012] initcall setup_vmstat+0x0/0x50 returned 0 after 0 usecs
    [ 4.376005] calling mm_sysfs_init+0x0/0x30 @ 1
    [ 4.380023] initcall mm_sysfs_init+0x0/0x30 returned 0 after 0 usecs
    [ 4.388005] calling hugetlb_init+0x0/0x350 @ 1
    [ 4.392009] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 4.400044] initcall hugetlb_init+0x0/0x350 returned 0 after 7812 usecs
    [ 4.404005] calling init_tmpfs+0x0/0x50 @ 1
    [ 4.408342] initcall init_tmpfs+0x0/0x50 returned 0 after 0 usecs
    [ 4.416005] calling slab_sysfs_init+0x0/0x100 @ 1
    [ 4.450836] initcall slab_sysfs_init+0x0/0x100 returned 0 after 27343 usecs
    [ 4.452007] calling fasync_init+0x0/0x30 @ 1
    [ 4.456584] initcall fasync_init+0x0/0x30 returned 0 after 0 usecs
    [ 4.464009] calling inotify_setup+0x0/0x20 @ 1
    [ 4.468482] initcall inotify_setup+0x0/0x20 returned 0 after 0 usecs
    [ 4.472005] calling inotify_user_setup+0x0/0xc0 @ 1
    [ 4.482013] initcall inotify_user_setup+0x0/0xc0 returned 0 after 0 usecs
    [ 4.484007] calling aio_setup+0x0/0xc0 @ 1
    [ 4.488694] initcall aio_setup+0x0/0xc0 returned 0 after 0 usecs
    [ 4.492008] calling init_sys32_ioctl+0x0/0x90 @ 1
    [ 4.500021] initcall init_sys32_ioctl+0x0/0x90 returned 0 after 0 usecs
    [ 4.504005] calling init_mbcache+0x0/0x20 @ 1
    [ 4.508008] initcall init_mbcache+0x0/0x20 returned 0 after 0 usecs
    [ 4.516005] calling dquot_init+0x0/0x100 @ 1
    [ 4.520004] VFS: Disk quotas dquot_6.5.1
    [ 4.526280] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 4.532010] initcall dquot_init+0x0/0x100 returned 0 after 11718 usecs
    [ 4.536046] calling vmcore_init+0x0/0xa40 @ 1
    [ 4.540006] initcall vmcore_init+0x0/0xa40 returned 0 after 0 usecs
    [ 4.548005] calling configfs_init+0x0/0xf0 @ 1
    [ 4.554661] initcall configfs_init+0x0/0xf0 returned 0 after 0 usecs
    [ 4.556025] calling init_devpts_fs+0x0/0x50 @ 1
    [ 4.560505] initcall init_devpts_fs+0x0/0x50 returned 0 after 0 usecs
    [ 4.564006] calling init_ext3_fs+0x0/0x80 @ 1
    [ 4.568279] initcall init_ext3_fs+0x0/0x80 returned 0 after 0 usecs
    [ 4.572008] calling journal_init+0x0/0xf0 @ 1
    [ 4.581436] initcall journal_init+0x0/0xf0 returned 0 after 0 usecs
    [ 4.584050] calling init_ramfs_fs+0x0/0x20 @ 1
    [ 4.592008] initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
    [ 4.596005] calling init_hugetlbfs_fs+0x0/0xc0 @ 1
    [ 4.604106] initcall init_hugetlbfs_fs+0x0/0xc0 returned 0 after 3906 usecs
    [ 4.608087] calling init_fat_fs+0x0/0x60 @ 1
    [ 4.612267] initcall init_fat_fs+0x0/0x60 returned 0 after 3906 usecs
    [ 4.620007] calling init_vfat_fs+0x0/0x20 @ 1
    [ 4.624008] initcall init_vfat_fs+0x0/0x20 returned 0 after 0 usecs
    [ 4.632005] calling vxfs_init+0x0/0x70 @ 1
    [ 4.637488] initcall vxfs_init+0x0/0x70 returned 0 after 0 usecs
    [ 4.640007] calling init_nfs_fs+0x0/0x130 @ 1
    [ 4.650092] initcall init_nfs_fs+0x0/0x130 returned 0 after 3906 usecs
    [ 4.652031] calling init_nlm+0x0/0x30 @ 1
    [ 4.656121] initcall init_nlm+0x0/0x30 returned 0 after 0 usecs
    [ 4.660005] calling init_nls_cp850+0x0/0x20 @ 1
    [ 4.664060] initcall init_nls_cp850+0x0/0x20 returned 0 after 0 usecs
    [ 4.668005] calling init_nls_cp855+0x0/0x20 @ 1
    [ 4.672006] initcall init_nls_cp855+0x0/0x20 returned 0 after 0 usecs
    [ 4.676005] calling init_nls_cp857+0x0/0x20 @ 1
    [ 4.680006] initcall init_nls_cp857+0x0/0x20 returned 0 after 0 usecs
    [ 4.684005] calling init_nls_cp862+0x0/0x20 @ 1
    [ 4.688006] initcall init_nls_cp862+0x0/0x20 returned 0 after 0 usecs
    [ 4.692005] calling init_nls_cp864+0x0/0x20 @ 1
    [ 4.696006] initcall init_nls_cp864+0x0/0x20 returned 0 after 0 usecs
    [ 4.700005] calling init_nls_cp869+0x0/0x20 @ 1
    [ 4.704006] initcall init_nls_cp869+0x0/0x20 returned 0 after 0 usecs
    [ 4.708005] calling init_nls_cp874+0x0/0x20 @ 1
    [ 4.712006] initcall init_nls_cp874+0x0/0x20 returned 0 after 0 usecs
    [ 4.716005] calling init_nls_cp949+0x0/0x20 @ 1
    [ 4.720006] initcall init_nls_cp949+0x0/0x20 returned 0 after 0 usecs
    [ 4.724005] calling init_nls_ascii+0x0/0x20 @ 1
    [ 4.728006] initcall init_nls_ascii+0x0/0x20 returned 0 after 0 usecs
    [ 4.732005] calling init_nls_iso8859_2+0x0/0x20 @ 1
    [ 4.736006] initcall init_nls_iso8859_2+0x0/0x20 returned 0 after 0 usecs
    [ 4.740005] calling init_nls_iso8859_3+0x0/0x20 @ 1
    [ 4.744006] initcall init_nls_iso8859_3+0x0/0x20 returned 0 after 0 usecs
    [ 4.748005] calling init_nls_iso8859_5+0x0/0x20 @ 1
    [ 4.752006] initcall init_nls_iso8859_5+0x0/0x20 returned 0 after 0 usecs
    [ 4.756005] calling init_nls_iso8859_6+0x0/0x20 @ 1
    [ 4.760006] initcall init_nls_iso8859_6+0x0/0x20 returned 0 after 0 usecs
    [ 4.764005] calling init_nls_iso8859_7+0x0/0x20 @ 1
    [ 4.768006] initcall init_nls_iso8859_7+0x0/0x20 returned 0 after 0 usecs
    [ 4.776006] calling init_hpfs_fs+0x0/0x70 @ 1
    [ 4.780362] initcall init_hpfs_fs+0x0/0x70 returned 0 after 0 usecs
    [ 4.784026] calling init_qnx4_fs+0x0/0x80 @ 1
    [ 4.791712] QNX4 filesystem 0.2.3 registered.
    [ 4.792008] initcall init_qnx4_fs+0x0/0x80 returned 0 after 3906 usecs
    [ 4.796005] calling init_jfs_fs+0x0/0x230 @ 1
    [ 4.800281] JFS: nTxBlock = 7682, nTxLock = 61461
    [ 4.817073] initcall init_jfs_fs+0x0/0x230 returned 0 after 15625 usecs
    [ 4.820005] calling init_befs_fs+0x0/0x90 @ 1
    [ 4.824005] BeFS version: 0.9.3
    [ 4.828430] initcall init_befs_fs+0x0/0x90 returned 0 after 3906 usecs
    [ 4.832006] calling init_mqueue_fs+0x0/0xe0 @ 1
    [ 4.836197] initcall init_mqueue_fs+0x0/0xe0 returned 0 after 0 usecs
    [ 4.844031] calling key_proc_init+0x0/0x60 @ 1
    [ 4.848037] initcall key_proc_init+0x0/0x60 returned 0 after 0 usecs
    [ 4.856006] calling selinux_nf_ip_init+0x0/0x70 @ 1
    [ 4.860005] SELinux: Registering netfilter hooks
    [ 4.864057] initcall selinux_nf_ip_init+0x0/0x70 returned 0 after 3906 usecs
    [ 4.872006] calling init_sel_fs+0x0/0x70 @ 1
    [ 4.877357] initcall init_sel_fs+0x0/0x70 returned 0 after 0 usecs
    [ 4.884006] calling selnl_init+0x0/0x50 @ 1
    [ 4.888054] initcall selnl_init+0x0/0x50 returned 0 after 0 usecs
    [ 4.892006] calling sel_netif_init+0x0/0x70 @ 1
    [ 4.896013] initcall sel_netif_init+0x0/0x70 returned 0 after 0 usecs
    [ 4.904006] calling sel_netnode_init+0x0/0xb0 @ 1
    [ 4.908010] initcall sel_netnode_init+0x0/0xb0 returned 0 after 0 usecs
    [ 4.916006] calling sel_netport_init+0x0/0xb0 @ 1
    [ 4.920010] initcall sel_netport_init+0x0/0xb0 returned 0 after 0 usecs
    [ 4.928006] calling aurule_init+0x0/0x40 @ 1
    [ 4.932007] initcall aurule_init+0x0/0x40 returned 0 after 0 usecs
    [ 4.936006] calling crypto_algapi_init+0x0/0x10 @ 1
    [ 4.944017] initcall crypto_algapi_init+0x0/0x10 returned 0 after 0 usecs
    [ 4.948006] calling chainiv_module_init+0x0/0x20 @ 1
    [ 4.956073] initcall chainiv_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 4.960006] calling eseqiv_module_init+0x0/0x20 @ 1
    [ 4.968010] initcall eseqiv_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 4.972006] calling seqiv_module_init+0x0/0x20 @ 1
    [ 4.976010] initcall seqiv_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 4.984006] calling hmac_module_init+0x0/0x20 @ 1
    [ 4.988010] initcall hmac_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 4.996006] calling md4_mod_init+0x0/0x20 @ 1
    [ 5.002273] initcall md4_mod_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.004008] calling md5_mod_init+0x0/0x20 @ 1
    [ 5.008065] initcall md5_mod_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.012007] calling rmd160_mod_init+0x0/0x20 @ 1
    [ 5.020016] initcall rmd160_mod_init+0x0/0x20 returned 0 after 3906 usecs
    [ 5.024005] calling rmd320_mod_init+0x0/0x20 @ 1
    [ 5.028066] initcall rmd320_mod_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.036008] calling sha1_generic_mod_init+0x0/0x20 @ 1
    [ 5.043254] initcall sha1_generic_mod_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.044008] calling sha256_generic_mod_init+0x0/0x50 @ 1
    [ 5.048067] initcall sha256_generic_mod_init+0x0/0x50 returned 0 after 0 usecs
    [ 5.056008] calling wp512_mod_init+0x0/0x90 @ 1
    [ 5.064017] initcall wp512_mod_init+0x0/0x90 returned 0 after 3906 usecs
    [ 5.068006] calling tgr192_mod_init+0x0/0x90 @ 1
    [ 5.072063] initcall tgr192_mod_init+0x0/0x90 returned 0 after 0 usecs
    [ 5.080007] calling crypto_ecb_module_init+0x0/0x20 @ 1
    [ 5.084010] initcall crypto_ecb_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.092013] calling crypto_cbc_module_init+0x0/0x20 @ 1
    [ 5.096010] initcall crypto_cbc_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.104005] calling crypto_cts_module_init+0x0/0x20 @ 1
    [ 5.112009] initcall crypto_cts_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.116005] calling crypto_module_init+0x0/0x20 @ 1
    [ 5.124009] initcall crypto_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.128005] calling crypto_module_init+0x0/0x20 @ 1
    [ 5.136009] initcall crypto_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.140005] calling crypto_ctr_module_init+0x0/0x50 @ 1
    [ 5.148013] initcall crypto_ctr_module_init+0x0/0x50 returned 0 after 0 usecs
    [ 5.152005] calling crypto_gcm_module_init+0x0/0x70 @ 1
    [ 5.160017] initcall crypto_gcm_module_init+0x0/0x70 returned 0 after 0 usecs
    [ 5.164005] calling crypto_ccm_module_init+0x0/0x70 @ 1
    [ 5.172017] initcall crypto_ccm_module_init+0x0/0x70 returned 0 after 0 usecs
    [ 5.180005] calling des_generic_mod_init+0x0/0x50 @ 1
    [ 5.185702] initcall des_generic_mod_init+0x0/0x50 returned 0 after 0 usecs
    [ 5.188007] calling serpent_mod_init+0x0/0x50 @ 1
    [ 5.192065] initcall serpent_mod_init+0x0/0x50 returned 0 after 0 usecs
    [ 5.200008] calling aes_init+0x0/0x360 @ 1
    [ 5.204453] initcall aes_init+0x0/0x360 returned 0 after 0 usecs
    [ 5.208008] calling arc4_init+0x0/0x20 @ 1
    [ 5.212070] initcall arc4_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.220008] calling khazad_mod_init+0x0/0x20 @ 1
    [ 5.225400] initcall khazad_mod_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.228008] calling salsa20_generic_mod_init+0x0/0x20 @ 1
    [ 5.232069] initcall salsa20_generic_mod_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.240007] calling deflate_mod_init+0x0/0x20 @ 1
    [ 5.245990] initcall deflate_mod_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.248010] calling michael_mic_init+0x0/0x20 @ 1
    [ 5.252080] initcall michael_mic_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.256008] calling krng_mod_init+0x0/0x20 @ 1
    [ 5.264468] alg: No test for stdrng (krng)
    [ 5.268058] initcall krng_mod_init+0x0/0x20 returned 0 after 3906 usecs
    [ 5.272007] calling bsg_init+0x0/0x150 @ 1
    [ 5.279893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    [ 5.280010] initcall bsg_init+0x0/0x150 returned 0 after 3906 usecs
    [ 5.284006] calling noop_init+0x0/0x20 @ 1
    [ 5.288078] io scheduler noop registered
    [ 5.292006] initcall noop_init+0x0/0x20 returned 0 after 3906 usecs
    [ 5.296005] calling cfq_init+0x0/0xa0 @ 1
    [ 5.304503] io scheduler cfq registered (default)
    [ 5.308008] initcall cfq_init+0x0/0xa0 returned 0 after 7812 usecs
    [ 5.312049] calling debug_objects_init_debugfs+0x0/0x70 @ 1
    [ 5.316006] initcall debug_objects_init_debugfs+0x0/0x70 returned 0 after 0 usecs
    [ 5.320005] calling percpu_counter_startup+0x0/0x20 @ 1
    [ 5.324009] initcall percpu_counter_startup+0x0/0x20 returned 0 after 0 usecs
    [ 5.328005] calling dynamic_printk_init+0x0/0xa0 @ 1
    [ 5.336125] initcall dynamic_printk_init+0x0/0xa0 returned 0 after 3906 usecs
    [ 5.340007] calling pci_init+0x0/0x40 @ 1
    [ 5.344047] pci 0000:00:00.0: Enabling HT MSI Mapping
    [ 5.364258] pci 0000:00:0b.0: Enabling HT MSI Mapping
    [ 5.368040] pci 0000:00:0b.0: Found enabled HT MSI Mapping
    [ 5.372055] pci 0000:00:0c.0: Enabling HT MSI Mapping
    [ 5.376027] pci 0000:00:0c.0: Found enabled HT MSI Mapping
    [ 5.380041] pci 0000:00:0d.0: Enabling HT MSI Mapping
    [ 5.384027] pci 0000:00:0d.0: Found enabled HT MSI Mapping
    [ 5.388040] pci 0000:00:0e.0: Enabling HT MSI Mapping
    [ 5.392027] pci 0000:00:0e.0: Found enabled HT MSI Mapping
    [ 5.396051] pci 0000:01:00.0: Boot video device
    [ 5.400019] initcall pci_init+0x0/0x40 returned 0 after 54687 usecs
    [ 5.404006] calling pci_proc_init+0x0/0x70 @ 1
    [ 5.408357] initcall pci_proc_init+0x0/0x70 returned 0 after 0 usecs
    [ 5.412006] calling vgg2432a4_init+0x0/0x20 @ 1
    [ 5.416253] initcall vgg2432a4_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.420007] calling tdo24m_init+0x0/0x20 @ 1
    [ 5.424071] initcall tdo24m_init+0x0/0x20 returned 0 after 0 usecs
    [ 5.432010] calling rand_initialize+0x0/0x40 @ 1
    [ 5.436064] initcall rand_initialize+0x0/0x40 returned 0 after 0 usecs
    [ 5.444005] calling tty_init+0x0/0x110 @ 1
    [ 5.465069] initcall tty_init+0x0/0x110 returned 0 after 15625 usecs
    [ 5.468009] calling pty_init+0x0/0x5c0 @ 1
    [ 5.619412] initcall pty_init+0x0/0x5c0 returned 0 after 136718 usecs
    [ 5.624248] calling sysrq_init+0x0/0x30 @ 1
    [ 5.628028] initcall sysrq_init+0x0/0x30 returned 0 after 0 usecs
    [ 5.636005] calling rp_init+0x0/0x1a30 @ 1
    [ 5.640004] RocketPort device driver module, version 2.09, 12-June-2003
    [ 5.644066] No rocketport ports found; unloading driver
    [ 5.652109] initcall rp_init+0x0/0x1a30 returned -6 after 11718 usecs
    [ 5.656005] initcall rp_init+0x0/0x1a30 returned with error code -6
    [ 5.664005] calling ip2_loadmain+0x0/0x14d0 @ 1
    [ 5.668004] Computone IntelliPort Plus multiport driver version 1.2.14
    [ 5.676712] initcall ip2_loadmain+0x0/0x14d0 returned 0 after 7812 usecs
    [ 5.680229] calling synclink_init+0x0/0x2c0 @ 1
    [ 5.684005] SyncLink serial driver $Revision: 4.38 $
    [ 5.732943] SyncLink serial driver $Revision: 4.38 $, tty major#253
    [ 5.736012] initcall synclink_init+0x0/0x2c0 returned 0 after 50781 usecs
    [ 5.744388] calling n_hdlc_init+0x0/0xb0 @ 1
    [ 5.748005] HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
    [ 5.756005] N_HDLC line discipline registered.
    [ 5.760005] initcall n_hdlc_init+0x0/0xb0 returned 0 after 11718 usecs
    [ 5.768004] calling rio_init+0x0/0x12a0 @ 1
    [ 5.776751] initcall rio_init+0x0/0x12a0 returned -5 after 3906 usecs
    [ 5.780078] initcall rio_init+0x0/0x12a0 returned with error code -5
    [ 5.784005] calling raw_init+0x0/0xf0 @ 1
    [ 5.788142] initcall raw_init+0x0/0xf0 returned 0 after 0 usecs
    [ 5.796008] calling agp_init+0x0/0x30 @ 1
    [ 5.800004] Linux agpgart interface v0.103
    [ 5.804005] initcall agp_init+0x0/0x30 returned 0 after 3906 usecs
    [ 5.808005] calling agp_via_init+0x0/0x30 @ 1
    [ 5.814999] initcall agp_via_init+0x0/0x30 returned 0 after 0 usecs
    [ 5.820007] calling ipmi_init_msghandler_mod+0x0/0x10 @ 1
    [ 5.826901] ipmi message handler version 39.2
    [ 5.828034] initcall ipmi_init_msghandler_mod+0x0/0x10 returned 0 after 3906 usecs
    [ 5.832026] calling ipmi_wdog_init+0x0/0x160 @ 1
    [ 5.836157] IPMI Watchdog: driver initialized
    [ 5.840005] initcall ipmi_wdog_init+0x0/0x160 returned 0 after 3906 usecs
    [ 5.844005] calling hangcheck_init+0x0/0x90 @ 1
    [ 5.848004] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
    [ 5.852004] Hangcheck: Using get_cycles().
    [ 5.856006] initcall hangcheck_init+0x0/0x90 returned 0 after 7812 usecs
    [ 5.860005] calling serial8250_init+0x0/0x160 @ 1
    [ 5.864004] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    [ 5.868199] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 5.878975] initcall serial8250_init+0x0/0x160 returned 0 after 11718 usecs
    [ 5.880010] calling jsm_init_module+0x0/0x60 @ 1
    [ 5.884221] initcall jsm_init_module+0x0/0x60 returned 0 after 0 usecs
    [ 5.892031] calling init_kgdboc+0x0/0x20 @ 1
    [ 5.896006] initcall init_kgdboc+0x0/0x20 returned 0 after 0 usecs
    [ 5.900007] calling topology_sysfs_init+0x0/0x50 @ 1
    [ 5.908071] initcall topology_sysfs_init+0x0/0x50 returned 0 after 0 usecs
    [ 5.912005] calling cpqarray_init+0x0/0x2a0 @ 1
    [ 5.920004] Compaq SMART2 Driver (v 2.6.0)
    [ 5.924590] initcall cpqarray_init+0x0/0x2a0 returned 0 after 3906 usecs
    [ 5.928108] calling cciss_init+0x0/0x30 @ 1
    [ 5.932004] HP CISS Driver (v 3.6.20)
    [ 5.936266] initcall cciss_init+0x0/0x30 returned 0 after 3906 usecs
    [ 5.940009] calling DAC960_init_module+0x0/0x60 @ 1
    [ 5.944175] initcall DAC960_init_module+0x0/0x60 returned 0 after 0 usecs
    [ 5.952010] calling init_kgdbts+0x0/0x20 @ 1
    [ 5.956027] initcall init_kgdbts+0x0/0x20 returned 0 after 0 usecs
    [ 5.964005] calling sm501_base_init+0x0/0x30 @ 1
    [ 5.969283] initcall sm501_base_init+0x0/0x30 returned 0 after 0 usecs
    [ 5.972007] calling e1000_init_module+0x0/0x70 @ 1
    [ 5.980042] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
    [ 5.984004] e1000e: Copyright (c) 1999-2008 Intel Corporation.
    [ 5.992664] initcall e1000_init_module+0x0/0x70 returned 0 after 11718 usecs
    [ 5.996006] calling cas_init+0x0/0x40 @ 1
    [ 6.004046] initcall cas_init+0x0/0x40 returned 0 after 3906 usecs
    [ 6.008026] calling eepro100_init_module+0x0/0x20 @ 1
    [ 6.012213] initcall eepro100_init_module+0x0/0x20 returned 0 after 0 usecs
    [ 6.020007] calling e100_init_module+0x0/0x60 @ 1
    [ 6.024004] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    [ 6.032004] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 6.038964] initcall e100_init_module+0x0/0x60 returned 0 after 11718 usecs
    [ 6.040006] calling r6040_init+0x0/0x20 @ 1
    [ 6.044167] initcall r6040_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.052007] calling acenic_init+0x0/0x20 @ 1
    [ 6.056914] initcall acenic_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.060007] calling natsemi_init_mod+0x0/0x20 @ 1
    [ 6.064184] initcall natsemi_init_mod+0x0/0x20 returned 0 after 3906 usecs
    [ 6.072007] calling tg3_init+0x0/0x20 @ 1
    [ 6.079148] initcall tg3_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.080007] calling sky2_init_module+0x0/0x60 @ 1
    [ 6.084004] sky2 driver version 1.22
    [ 6.088219] initcall sky2_init_module+0x0/0x60 returned 0 after 3906 usecs
    [ 6.096007] calling starfire_init+0x0/0x20 @ 1
    [ 6.101133] initcall starfire_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.104007] calling davicom_init+0x0/0x70 @ 1
    [ 6.112479] initcall davicom_init+0x0/0x70 returned 0 after 3906 usecs
    [ 6.116027] calling cicada_init+0x0/0x50 @ 1
    [ 6.120401] initcall cicada_init+0x0/0x50 returned 0 after 0 usecs
    [ 6.124007] calling lxt_init+0x0/0x50 @ 1
    [ 6.128165] initcall lxt_init+0x0/0x50 returned 0 after 0 usecs
    [ 6.136008] calling fixed_mdio_bus_init+0x0/0x110 @ 1
    [ 6.141618] Fixed MDIO Bus: probed
    [ 6.144008] initcall fixed_mdio_bus_init+0x0/0x110 returned 0 after 3906 usecs
    [ 6.152042] calling hamachi_init+0x0/0x20 @ 1
    [ 6.156856] initcall hamachi_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.160007] calling net_olddevs_init+0x0/0xb0 @ 1
    [ 6.164010] initcall net_olddevs_init+0x0/0xb0 returned 0 after 0 usecs
    [ 6.172005] calling init_nic+0x0/0x20 @ 1
    [ 6.176051] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
    [ 6.184033] forcedeth 0000:00:0a.0: setting latency timer to 64
    [ 6.188078] nv_probe: set workaround bit for reversed mac addr
    [ 6.718088] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
    [ 6.720008] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
    [ 6.724176] initcall init_nic+0x0/0x20 returned 0 after 535156 usecs
    [ 6.728008] calling ql3xxx_init_module+0x0/0x20 @ 1
    [ 6.737012] initcall ql3xxx_init_module+0x0/0x20 returned 0 after 0 usecs
    [ 6.740007] calling dummy_init_module+0x0/0xf0 @ 1
    [ 6.744457] initcall dummy_init_module+0x0/0xf0 returned 0 after 0 usecs
    [ 6.752009] calling dfx_init+0x0/0x20 @ 1
    [ 6.757576] initcall dfx_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.760007] calling cp_init+0x0/0x20 @ 1
    [ 6.764068] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    [ 6.768005] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
    [ 6.772004] 8139cp 0000:05:07.0: Try the "8139too" driver instead.
    [ 6.776169] initcall cp_init+0x0/0x20 returned 0 after 11718 usecs
    [ 6.780007] calling rtl8139_init_module+0x0/0x20 @ 1
    [ 6.784067] 8139too Fast Ethernet driver 0.9.28
    [ 6.793791] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11
    [ 6.796006] eth1: Identified 8139 chip type 'RTL-8139B'
    [ 6.800169] initcall rtl8139_init_module+0x0/0x20 returned 0 after 15625 usecs
    [ 6.808007] calling eql_init_module+0x0/0x80 @ 1
    [ 6.812004] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
    [ 6.823557] initcall eql_init_module+0x0/0x80 returned 0 after 7812 usecs
    [ 6.824007] calling tun_init+0x0/0xb0 @ 1
    [ 6.828007] tun: Universal TUN/TAP device driver, 1.6
    [ 6.832004] tun: (C) 1999-2004 Max Krasnyansky
    [ 6.836364] initcall tun_init+0x0/0xb0 returned 0 after 7812 usecs
    [ 6.840007] calling rio_init+0x0/0x20 @ 1
    [ 6.848383] initcall rio_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.852007] calling rtl8169_init_module+0x0/0x20 @ 1
    [ 6.856196] initcall rtl8169_init_module+0x0/0x20 returned 0 after 0 usecs
    [ 6.864007] calling enc28j60_init+0x0/0x30 @ 1
    [ 6.870992] initcall enc28j60_init+0x0/0x30 returned 0 after 0 usecs
    [ 6.872007] calling olympic_pci_init+0x0/0x20 @ 1
    [ 6.876198] initcall olympic_pci_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.884007] calling xl_pci_init+0x0/0x20 @ 1
    [ 6.889418] initcall xl_pci_init+0x0/0x20 returned 0 after 0 usecs
    [ 6.892007] calling init_dlci+0x0/0x40 @ 1
    [ 6.896063] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
    [ 6.900005] initcall init_dlci+0x0/0x40 returned 0 after 3906 usecs
    [ 6.904005] calling catc_init+0x0/0x40 @ 1
    [ 6.908164] usbcore: registered new interface driver catc
    [ 6.912012] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
    [ 6.916006] initcall catc_init+0x0/0x40 returned 0 after 7812 usecs
    [ 6.924005] calling usb_rtl8150_init+0x0/0x30 @ 1
    [ 6.928004] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
    [ 6.937704] usbcore: registered new interface driver rtl8150
    [ 6.940014] initcall usb_rtl8150_init+0x0/0x30 returned 0 after 11718 usecs
    [ 6.944005] calling cdc_init+0x0/0x20 @ 1
    [ 6.948134] usbcore: registered new interface driver cdc_ether
    [ 6.956014] initcall cdc_init+0x0/0x20 returned 0 after 7812 usecs
    [ 6.960005] calling usbnet_init+0x0/0x20 @ 1
    [ 6.966898] usbcore: registered new interface driver gl620a
    [ 6.968014] initcall usbnet_init+0x0/0x20 returned 0 after 3906 usecs
    [ 6.972013] calling net1080_init+0x0/0x20 @ 1
    [ 6.976134] usbcore: registered new interface driver net1080
    [ 6.984021] initcall net1080_init+0x0/0x20 returned 0 after 7812 usecs
    [ 6.988005] calling plusb_init+0x0/0x20 @ 1
    [ 6.995915] usbcore: registered new interface driver plusb
    [ 6.996014] initcall plusb_init+0x0/0x20 returned 0 after 3906 usecs
    [ 7.000005] calling rndis_init+0x0/0x20 @ 1
    [ 7.004134] usbcore: registered new interface driver rndis_host
    [ 7.012014] initcall rndis_init+0x0/0x20 returned 0 after 7812 usecs
    [ 7.020005] calling zaurus_init+0x0/0x20 @ 1
    [ 7.024763] usbcore: registered new interface driver zaurus
    [ 7.028016] initcall zaurus_init+0x0/0x20 returned 0 after 3906 usecs
    [ 7.032005] calling usbnet_init+0x0/0x30 @ 1
    [ 7.036014] initcall usbnet_init+0x0/0x30 returned 0 after 0 usecs
    [ 7.040005] calling ipw2100_init+0x0/0x90 @ 1
    [ 7.044004] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
    [ 7.048004] ipw2100: Copyright(c) 2003-2006 Intel Corporation
    [ 7.056186] initcall ipw2100_init+0x0/0x90 returned 0 after 11718 usecs
    [ 7.060007] calling strip_init_driver+0x0/0x70 @ 1
    [ 7.064004] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
    [ 7.072025] initcall strip_init_driver+0x0/0x70 returned 0 after 7812 usecs
    [ 7.080005] calling init_orinoco+0x0/0x20 @ 1
    [ 7.084004] orinoco 0.15 (David Gibson , Pavel Roskin , et al)
    [ 7.092005] initcall init_orinoco+0x0/0x20 returned 0 after 7812 usecs
    [ 7.100005] calling init_hermes+0x0/0x10 @ 1
    [ 7.104005] initcall init_hermes+0x0/0x10 returned 0 after 0 usecs
    [ 7.112005] calling init_hermes_dld+0x0/0x10 @ 1
    [ 7.116005] initcall init_hermes_dld+0x0/0x10 returned 0 after 0 usecs
    [ 7.120005] calling prism54_module_init+0x0/0x40 @ 1
    [ 7.128004] Loaded prism54 driver, version 1.2
    [ 7.133082] initcall prism54_module_init+0x0/0x40 returned 0 after 3906 usecs
    [ 7.136007] calling hostap_init+0x0/0x50 @ 1
    [ 7.140022] initcall hostap_init+0x0/0x50 returned 0 after 0 usecs
    [ 7.144005] calling init_prism2_pci+0x0/0x20 @ 1
    [ 7.148198] initcall init_prism2_pci+0x0/0x20 returned 0 after 0 usecs
    [ 7.156007] calling rndis_wlan_init+0x0/0x20 @ 1
    [ 7.162892] usbcore: registered new interface driver rndis_wlan
    [ 7.164015] initcall rndis_wlan_init+0x0/0x20 returned 0 after 3906 usecs
    [ 7.168005] calling sixpack_init_driver+0x0/0x50 @ 1
    [ 7.172004] AX.25: 6pack driver, Revision: 0.3.0
    [ 7.176006] initcall sixpack_init_driver+0x0/0x50 returned 0 after 3906 usecs
    [ 7.180005] calling yam_init_driver+0x0/0x150 @ 1
    [ 7.184004] YAM driver version 0.8 by F1OAT/F6FBB
    [ 7.196044] initcall yam_init_driver+0x0/0x150 returned 0 after 11718 usecs
    [ 7.200050] calling init_netconsole+0x0/0x260 @ 1
    [ 7.208540] console [netcon0] enabled
    [ 7.212007] netconsole: network logging started
    [ 7.216007] initcall init_netconsole+0x0/0x260 returned 0 after 7812 usecs
    [ 7.220005] calling videodev_init+0x0/0xa0 @ 1
    [ 7.228006] Linux video capture interface: v2.00
    [ 7.233208] initcall videodev_init+0x0/0xa0 returned 0 after 3906 usecs
    [ 7.236046] calling zatm_init_module+0x0/0x20 @ 1
    [ 7.240177] initcall zatm_init_module+0x0/0x20 returned 0 after 0 usecs
    [ 7.244016] calling uPD98402_module_init+0x0/0x10 @ 1
    [ 7.252007] initcall uPD98402_module_init+0x0/0x10 returned 0 after 0 usecs
    [ 7.256005] calling ia_module_init+0x0/0x80 @ 1
    [ 7.264200] initcall ia_module_init+0x0/0x80 returned 0 after 3906 usecs
    [ 7.268007] calling fore200e_module_init+0x0/0x30 @ 1
    [ 7.272004] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
    [ 7.276165] initcall fore200e_module_init+0x0/0x30 returned 0 after 3906 usecs
    [ 7.284008] calling eni_init+0x0/0x20 @ 1
    [ 7.290271] initcall eni_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.292007] calling spi_transport_init+0x0/0x30 @ 1
    [ 7.296122] initcall spi_transport_init+0x0/0x30 returned 0 after 0 usecs
    [ 7.304009] calling fc_transport_init+0x0/0x50 @ 1
    [ 7.309714] initcall fc_transport_init+0x0/0x50 returned 0 after 0 usecs
    [ 7.316009] calling scsi_dh_init+0x0/0x50 @ 1
    [ 7.320045] initcall scsi_dh_init+0x0/0x50 returned 0 after 0 usecs
    [ 7.324007] calling rdac_init+0x0/0x40 @ 1
    [ 7.328051] rdac: device handler registered
    [ 7.332007] initcall rdac_init+0x0/0x40 returned 0 after 3906 usecs
    [ 7.340006] calling adpt_init+0x0/0x1110 @ 1
    [ 7.344004] Loading Adaptec I2O RAID: Version 2.4 Build 5go
    [ 7.348005] Detecting Adaptec I2O RAID controllers...
    [ 7.356029] initcall adpt_init+0x0/0x1110 returned -19 after 11718 usecs
    [ 7.360005] calling ahc_linux_init+0x0/0x70 @ 1
    [ 7.368024] initcall ahc_linux_init+0x0/0x70 returned 0 after 3906 usecs
    [ 7.372080] calling ips_module_init+0x0/0x220 @ 1
    [ 7.376182] initcall ips_module_init+0x0/0x220 returned -19 after 0 usecs
    [ 7.384019] calling init_this_scsi_driver+0x0/0x110 @ 1
    [ 7.388075] scsi: Detection failed (no card)
    [ 7.396008] initcall init_this_scsi_driver+0x0/0x110 returned -19 after 7812 usecs
    [ 7.404007] calling qla1280_init+0x0/0x20 @ 1
    [ 7.409188] initcall qla1280_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.412007] calling dc395x_module_init+0x0/0x20 @ 1
    [ 7.416194] initcall dc395x_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.420008] calling megasas_init+0x0/0x170 @ 1
    [ 7.424004] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
    [ 7.433864] initcall megasas_init+0x0/0x170 returned 0 after 7812 usecs
    [ 7.436007] calling atp870u_init+0x0/0x20 @ 1
    [ 7.440177] initcall atp870u_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.444008] calling inia100_init+0x0/0x20 @ 1
    [ 7.451891] initcall inia100_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.452007] calling hptiop_module_init+0x0/0x40 @ 1
    [ 7.456004] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
    [ 7.460165] initcall hptiop_module_init+0x0/0x40 returned 0 after 3906 usecs
    [ 7.468009] calling stex_init+0x0/0x30 @ 1
    [ 7.472004] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
    [ 7.478642] initcall stex_init+0x0/0x30 returned 0 after 3906 usecs
    [ 7.480007] calling init_osst+0x0/0x150 @ 1
    [ 7.484004] osst :I: Tape driver with OnStream support version 0.99.4
    [ 7.484008] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
    [ 7.488123] Driver 'osst' needs updating - please use bus_type methods
    [ 7.496984] initcall init_osst+0x0/0x150 returned 0 after 11718 usecs
    [ 7.500007] calling init_sd+0x0/0x100 @ 1
    [ 7.504261] Driver 'sd' needs updating - please use bus_type methods
    [ 7.508127] initcall init_sd+0x0/0x100 returned 0 after 3906 usecs
    [ 7.516028] calling init_sg+0x0/0x170 @ 1
    [ 7.520583] initcall init_sg+0x0/0x170 returned 0 after 0 usecs
    [ 7.524028] calling init_ch_module+0x0/0xc0 @ 1
    [ 7.528006] SCSI Media Changer driver v0.25
    [ 7.532122] Driver 'ch' needs updating - please use bus_type methods
    [ 7.541936] initcall init_ch_module+0x0/0xc0 returned 0 after 11718 usecs
    [ 7.544007] calling ahci_init+0x0/0x20 @ 1
    [ 7.548206] initcall ahci_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.552027] calling piix_init+0x0/0x30 @ 1
    [ 7.559374] initcall piix_init+0x0/0x30 returned 0 after 0 usecs
    [ 7.560007] calling qs_ata_init+0x0/0x20 @ 1
    [ 7.564212] initcall qs_ata_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.568009] calling sil_init+0x0/0x20 @ 1
    [ 7.576351] initcall sil_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.580007] calling nv_init+0x0/0x20 @ 1
    [ 7.584189] initcall nv_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.592009] calling ali_init+0x0/0x20 @ 1
    [ 7.596497] initcall ali_init+0x0/0x20 returned 0 after 0 usecs
    [ 7.600007] calling amd_init+0x0/0x20 @ 1
    [ 7.604052] pata_amd 0000:00:06.0: version 0.3.10
    [ 7.608145] pata_amd 0000:00:06.0: setting latency timer to 64
    [ 7.612378] scsi0 : pata_amd
    [ 7.618667] scsi1 : pata_amd
    [ 7.620352] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 7.624007] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 7.800536] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
    [ 7.804006] ata1.00: 488397168 sectors, multi 1: LBA48
    [ 7.812016] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
    [ 7.844470] ata1.00: configured for UDMA/100
    [ 8.008299] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
    [ 8.012013] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
    [ 8.032192] ata2.01: configured for UDMA/33
    [ 8.037223] isa bounce pool size: 16 pages
    [ 8.041392] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
    [ 8.053223] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
    [ 8.060101] sd 0:0:0:0: [sda] Write Protect is off
    [ 8.064007] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 8.068196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 8.081954] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
    [ 8.088094] sd 0:0:0:0: [sda] Write Protect is off
    [ 8.092005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 8.096169] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 8.108013] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 8.192481] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 8.196163] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 8.206515] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
    [ 8.216446] scsi 1:0:1:0: Attached scsi generic sg1 type 5
    [ 8.220222] initcall amd_init+0x0/0x20 returned 0 after 601562 usecs
    [ 8.228052] calling atiixp_init+0x0/0x20 @ 1
    [ 8.233202] initcall atiixp_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.236009] calling cmd64x_init+0x0/0x20 @ 1
    [ 8.243929] initcall cmd64x_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.244008] calling cs5520_init+0x0/0x20 @ 1
    [ 8.248214] initcall cs5520_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.256009] calling efar_init+0x0/0x20 @ 1
    [ 8.261069] initcall efar_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.264009] calling it8213_init+0x0/0x20 @ 1
    [ 8.271598] initcall it8213_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.272008] calling ninja32_init+0x0/0x20 @ 1
    [ 8.276189] initcall ninja32_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.284009] calling ns87410_init+0x0/0x20 @ 1
    [ 8.289209] initcall ns87410_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.292007] calling mpiix_init+0x0/0x20 @ 1
    [ 8.296168] initcall mpiix_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.304009] calling oldpiix_init+0x0/0x20 @ 1
    [ 8.310531] initcall oldpiix_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.312007] calling pdc202xx_init+0x0/0x20 @ 1
    [ 8.316167] initcall pdc202xx_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.320017] calling sc1200_init+0x0/0x20 @ 1
    [ 8.328311] initcall sc1200_init+0x0/0x20 returned 0 after 3906 usecs
    [ 8.332007] calling serverworks_init+0x0/0x20 @ 1
    [ 8.336169] initcall serverworks_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.344009] calling sil680_init+0x0/0x20 @ 1
    [ 8.350755] initcall sil680_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.352007] calling ata_generic_init+0x0/0x20 @ 1
    [ 8.356195] initcall ata_generic_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.364009] calling at25_init+0x0/0x20 @ 1
    [ 8.368752] initcall at25_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.372007] calling tle62x0_init+0x0/0x20 @ 1
    [ 8.376147] initcall tle62x0_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.384009] calling aoe_init+0x0/0xc0 @ 1
    [ 8.391525] aoe: AoE v47 initialised.
    [ 8.392264] initcall aoe_init+0x0/0xc0 returned 0 after 3906 usecs
    [ 8.396006] calling mon_init+0x0/0x140 @ 1
    [ 8.400718] initcall mon_init+0x0/0x140 returned 0 after 0 usecs
    [ 8.404008] calling ehci_hcd_init+0x0/0x120 @ 1
    [ 8.408144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 8.412146] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
    [ 8.416017] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
    [ 8.420008] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
    [ 8.424211] initcall ehci_hcd_init+0x0/0x120 returned 0 after 15625 usecs
    [ 8.432047] calling ohci_hcd_mod_init+0x0/0x120 @ 1
    [ 8.436005] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 8.440094] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
    [ 8.448007] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!
    [ 8.460010] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
    [ 8.466406] initcall ohci_hcd_mod_init+0x0/0x120 returned 0 after 27343 usecs
    [ 8.468007] calling uhci_hcd_init+0x0/0x100 @ 1
    [ 8.472004] uhci_hcd: USB Universal Host Controller Interface driver
    [ 8.476673] initcall uhci_hcd_init+0x0/0x100 returned 0 after 3906 usecs
    [ 8.480007] calling c67x00_init+0x0/0x20 @ 1
    [ 8.488054] initcall c67x00_init+0x0/0x20 returned 0 after 3906 usecs
    [ 8.492009] calling acm_init+0x0/0x150 @ 1
    [ 8.498932] usbcore: registered new interface driver cdc_acm
    [ 8.500013] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
    [ 8.504006] initcall acm_init+0x0/0x150 returned 0 after 7812 usecs
    [ 8.508005] calling usb_stor_init+0x0/0x50 @ 1
    [ 8.512004] Initializing USB Mass Storage driver...
    [ 8.516174] usbcore: registered new interface driver usb-storage
    [ 8.520027] USB Mass Storage support registered.
    [ 8.524007] initcall usb_stor_init+0x0/0x50 returned 0 after 11718 usecs
    [ 8.532008] calling adu_init+0x0/0xa0 @ 1
    [ 8.536005] drivers/usb/misc/adutux.c : adu_init : enter
    [ 8.543770] usbcore: registered new interface driver adutux
    [ 8.544013] adutux adutux (see www.ontrak.net) v0.0.13
    [ 8.548004] adutux is an experimental driver. Use at your own risk
    [ 8.552004] drivers/usb/misc/adutux.c : adu_init : leave, return value 0
    [ 8.556006] initcall adu_init+0x0/0xa0 returned 0 after 19531 usecs
    [ 8.560005] calling cypress_init+0x0/0x40 @ 1
    [ 8.564137] usbcore: registered new interface driver cypress_cy7c63
    [ 8.572016] initcall cypress_init+0x0/0x40 returned 0 after 7812 usecs
    [ 8.576013] calling usb_cytherm_init+0x0/0x60 @ 1
    [ 8.583855] usbcore: registered new interface driver cytherm
    [ 8.584012] cytherm: v1.0:Cypress USB Thermometer driver
    [ 8.588006] initcall usb_cytherm_init+0x0/0x60 returned 0 after 7812 usecs
    [ 8.592005] calling emi26_init+0x0/0x20 @ 1
    [ 8.596135] usbcore: registered new interface driver emi26 - firmware loader
    [ 8.604016] initcall emi26_init+0x0/0x20 returned 0 after 7812 usecs
    [ 8.608006] calling ftdi_elan_init+0x0/0x180 @ 1
    [ 8.612006] driver ftdi-elan built at 16:24:24 on Oct 23 2008
    [ 8.622161] usbcore: registered new interface driver ftdi-elan
    [ 8.624013] initcall ftdi_elan_init+0x0/0x180 returned 0 after 11718 usecs
    [ 8.628008] calling usb_lcd_init+0x0/0x40 @ 1
    [ 8.632218] usbcore: registered new interface driver usblcd
    [ 8.636012] initcall usb_lcd_init+0x0/0x40 returned 0 after 3906 usecs
    [ 8.640026] calling lego_usb_tower_init+0x0/0x90 @ 1
    [ 8.644004] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter
    [ 8.648156] usbcore: registered new interface driver legousbtower
    [ 8.656034] legousbtower: v0.96:LEGO USB Tower Driver
    [ 8.660005] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0
    [ 8.668008] initcall lego_usb_tower_init+0x0/0x90 returned 0 after 23437 usecs
    [ 8.676007] calling usb_rio_init+0x0/0x40 @ 1
    [ 8.681950] usbcore: registered new interface driver rio500
    [ 8.684012] rio500: v1.1:USB Rio 500 driver
    [ 8.688006] initcall usb_rio_init+0x0/0x40 returned 0 after 7812 usecs
    [ 8.692005] calling usb_sisusb_init+0x0/0x20 @ 1
    [ 8.696135] usbcore: registered new interface driver sisusb
    [ 8.704016] initcall usb_sisusb_init+0x0/0x20 returned 0 after 7812 usecs
    [ 8.708006] calling i8042_init+0x0/0xd0 @ 1
    [ 8.718415] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 8.720135] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 8.728021] initcall i8042_init+0x0/0xd0 returned 0 after 15625 usecs
    [ 8.732006] calling pcips2_init+0x0/0x20 @ 1
    [ 8.739902] initcall pcips2_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.740044] calling mousedev_init+0x0/0x70 @ 1
    [ 8.744721] mice: PS/2 mouse device common for all mice
    [ 8.748009] initcall mousedev_init+0x0/0x70 returned 0 after 3906 usecs
    [ 8.752026] calling atkbd_init+0x0/0x20 @ 1
    [ 8.756117] initcall atkbd_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.764063] calling xtkbd_init+0x0/0x20 @ 1
    [ 8.769841] initcall xtkbd_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.772008] calling nkbd_init+0x0/0x20 @ 1
    [ 8.780121] initcall nkbd_init+0x0/0x20 returned 0 after 3906 usecs
    [ 8.784010] calling skbd_init+0x0/0x20 @ 1
    [ 8.790795] initcall skbd_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.792008] calling adi_init+0x0/0x20 @ 1
    [ 8.792242] input: AT Translated Set 2 keyboard as /class/input/input0
    [ 8.796087] initcall adi_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.804008] calling analog_init+0x0/0x130 @ 1
    [ 8.810067] initcall analog_init+0x0/0x130 returned 0 after 0 usecs
    [ 8.812007] calling gf2k_init+0x0/0x20 @ 1
    [ 8.816243] initcall gf2k_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.820008] calling iforce_init+0x0/0x60 @ 1
    [ 8.824157] usbcore: registered new interface driver iforce
    [ 8.832772] initcall iforce_init+0x0/0x60 returned 0 after 7812 usecs
    [ 8.836007] calling joydump_init+0x0/0x20 @ 1
    [ 8.840138] initcall joydump_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.848027] calling twidjoy_init+0x0/0x20 @ 1
    [ 8.854556] initcall twidjoy_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.856027] calling warrior_init+0x0/0x20 @ 1
    [ 8.860169] initcall warrior_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.864010] calling zhenhua_init+0x0/0x20 @ 1
    [ 8.872143] initcall zhenhua_init+0x0/0x20 returned 0 after 3906 usecs
    [ 8.876009] calling usb_acecad_init+0x0/0x40 @ 1
    [ 8.884015] usbcore: registered new interface driver usb_acecad
    [ 8.888031] acecad: v3.2:USB Acecad Flair tablet driver
    [ 8.892007] initcall usb_acecad_init+0x0/0x40 returned 0 after 11718 usecs
    [ 8.896006] calling ads7846_init+0x0/0x20 @ 1
    [ 8.900194] initcall ads7846_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.908010] calling gunze_init+0x0/0x20 @ 1
    [ 8.913222] initcall gunze_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.916008] calling fujitsu_init+0x0/0x20 @ 1
    [ 8.920156] initcall fujitsu_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.928010] calling inexio_init+0x0/0x20 @ 1
    [ 8.934594] initcall inexio_init+0x0/0x20 returned 0 after 0 usecs
    [ 8.936008] calling usb_keyspan_init+0x0/0x40 @ 1
    [ 8.940161] usbcore: registered new interface driver keyspan_remote
    [ 8.944017] initcall usb_keyspan_init+0x0/0x40 returned 0 after 3906 usecs
    [ 8.952007] calling abituguru_init+0x0/0x180 @ 1
    [ 8.956008] abituguru: no Abit uGuru found, data = 0xFF, cmd = 0xFF
    [ 8.964008] initcall abituguru_init+0x0/0x180 returned -19 after 7812 usecs
    [ 8.972007] calling f71882fg_init+0x0/0x120 @ 1
    [ 8.976014] f71882fg: Not a Fintek device
    [ 8.980017] f71882fg: Not a Fintek device
    [ 8.984007] initcall f71882fg_init+0x0/0x120 returned -19 after 7812 usecs
    [ 8.988007] calling sm_it87_init+0x0/0x390 @ 1
    [ 8.996029] it87: Found IT8712F chip at 0x290, revision 7
    [ 9.000010] it87: in3 is VCC (+5V)
    [ 9.004005] it87: in7 is VCCH (+5V Stand-By)
    [ 9.009953] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
    [ 9.012924] initcall sm_it87_init+0x0/0x390 returned 0 after 15625 usecs
    [ 9.016007] calling max1111_init+0x0/0x20 @ 1
    [ 9.020164] initcall max1111_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.024010] calling smsc47b397_init+0x0/0x1e0 @ 1
    [ 9.032033] initcall smsc47b397_init+0x0/0x1e0 returned -19 after 0 usecs
    [ 9.036006] calling sm_via686a_init+0x0/0x20 @ 1
    [ 9.044127] initcall sm_via686a_init+0x0/0x20 returned 0 after 3906 usecs
    [ 9.048007] calling wdtpci_init+0x0/0x20 @ 1
    [ 9.052222] initcall wdtpci_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.060010] calling acq_init+0x0/0x70 @ 1
    [ 9.064004] WDT driver for Acquire single board computer initialising.
    [ 9.072581] acquirewdt: I/O address 0x0043 already in use
    [ 9.076023] acquirewdt: probe of acquirewdt failed with error -5
    [ 9.080011] initcall acq_init+0x0/0x70 returned 0 after 15625 usecs
    [ 9.084006] calling advwdt_init+0x0/0x70 @ 1
    [ 9.088004] WDT driver for Advantech single board computer initialising.
    [ 9.092800] advantechwdt: initialized. timeout=60 sec (nowayout=0)
    [ 9.096015] initcall advwdt_init+0x0/0x70 returned 0 after 7812 usecs
    [ 9.100030] calling watchdog_init+0x0/0x1b0 @ 1
    [ 9.104049] initcall watchdog_init+0x0/0x1b0 returned -19 after 0 usecs
    [ 9.108005] calling alim7101_wdt_init+0x0/0x200 @ 1
    [ 9.112004] alim7101_wdt: Steve Hill .
    [ 9.116023] alim7101_wdt: ALi M7101 PMU not present - WDT not set
    [ 9.120006] initcall alim7101_wdt_init+0x0/0x200 returned -16 after 7812 usecs
    [ 9.124006] initcall alim7101_wdt_init+0x0/0x200 returned with error code -16
    [ 9.128008] calling wafwdt_init+0x0/0x190 @ 1
    [ 9.132004] WDT driver for Wafer 5823 single board computer initialising.
    [ 9.136010] Wafer 5823 WDT: I/O address 0x0443 already in use
    [ 9.140008] initcall wafwdt_init+0x0/0x190 returned -5 after 7812 usecs
    [ 9.144005] initcall wafwdt_init+0x0/0x190 returned with error code -5
    [ 9.148005] calling pc87413_init+0x0/0xb0 @ 1
    [ 9.152004] pc87413 WDT: Version 1.1 at io 0x2E
    [ 9.156006] pc87413 WDT: cannot register miscdev on minor=130 (err=-16)
    [ 9.160006] initcall pc87413_init+0x0/0xb0 returned -16 after 7812 usecs
    [ 9.164006] initcall pc87413_init+0x0/0xb0 returned with error code -16
    [ 9.168006] calling cpu5wdt_init_module+0x0/0x160 @ 1
    [ 9.172008] cpu5wdt: sorry, was my fault
    [ 9.176005] cpu5wdt: misc_register failed
    [ 9.180008] initcall cpu5wdt_init_module+0x0/0x160 returned -16 after 7812 usecs
    [ 9.184006] initcall cpu5wdt_init_module+0x0/0x160 returned with error code -16
    [ 9.188006] calling wdt_init+0x0/0x210 @ 1
    [ 9.192004] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
    [ 9.196024] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
    [ 9.200020] w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16)
    [ 9.204008] initcall wdt_init+0x0/0x210 returned -16 after 11718 usecs
    [ 9.208006] initcall wdt_init+0x0/0x210 returned with error code -16
    [ 9.212006] calling telephony_init+0x0/0x50 @ 1
    [ 9.216004] Linux telephony interface: v1.00
    [ 9.220027] initcall telephony_init+0x0/0x50 returned 0 after 3906 usecs
    [ 9.224006] calling raid0_init+0x0/0x20 @ 1
    [ 9.228072] md: raid0 personality registered for level 0
    [ 9.232007] initcall raid0_init+0x0/0x20 returned 0 after 3906 usecs
    [ 9.236006] calling raid_init+0x0/0x20 @ 1
    [ 9.240005] md: raid10 personality registered for level 10
    [ 9.244006] initcall raid_init+0x0/0x20 returned 0 after 3906 usecs
    [ 9.248006] calling kcapi_init+0x0/0xa0 @ 1
    [ 9.252089] CAPI Subsystem Rev 1.1.2.8
    [ 9.256006] initcall kcapi_init+0x0/0xa0 returned 0 after 3906 usecs
    [ 9.260005] calling cpufreq_gov_dbs_init+0x0/0x20 @ 1
    [ 9.264007] initcall cpufreq_gov_dbs_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.268005] calling init_ladder+0x0/0x20 @ 1
    [ 9.272051] cpuidle: using governor ladder
    [ 9.276006] initcall init_ladder+0x0/0x20 returned 0 after 3906 usecs
    [ 9.280005] calling heartbeat_trig_init+0x0/0x20 @ 1
    [ 9.284189] initcall heartbeat_trig_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.288005] calling init_soundcore+0x0/0x70 @ 1
    [ 9.292149] initcall init_soundcore+0x0/0x70 returned 0 after 0 usecs
    [ 9.296067] calling sysctl_core_init+0x0/0x30 @ 1
    [ 9.300600] initcall sysctl_core_init+0x0/0x30 returned 0 after 3906 usecs
    [ 9.308007] calling flow_cache_init+0x0/0x1e0 @ 1
    [ 9.316029] initcall flow_cache_init+0x0/0x1e0 returned 0 after 3906 usecs
    [ 9.320005] calling llc_init+0x0/0x20 @ 1
    [ 9.324008] initcall llc_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.328007] calling snap_init+0x0/0x40 @ 1
    [ 9.332043] initcall snap_init+0x0/0x40 returned 0 after 0 usecs
    [ 9.336005] calling rif_init+0x0/0xa0 @ 1
    [ 9.340112] initcall rif_init+0x0/0xa0 returned 0 after 0 usecs
    [ 9.344005] calling blackhole_module_init+0x0/0x20 @ 1
    [ 9.348007] initcall blackhole_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.352005] calling hfsc_init+0x0/0x20 @ 1
    [ 9.356006] initcall hfsc_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.360005] calling sfq_module_init+0x0/0x20 @ 1
    [ 9.364006] initcall sfq_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.368005] calling teql_init+0x0/0xf0 @ 1
    [ 9.376170] initcall teql_init+0x0/0xf0 returned 0 after 3906 usecs
    [ 9.380005] calling prio_module_init+0x0/0x20 @ 1
    [ 9.384008] initcall prio_module_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.392006] calling init_route4+0x0/0x20 @ 1
    [ 9.396073] initcall init_route4+0x0/0x20 returned 0 after 0 usecs
    [ 9.404007] calling init_basic+0x0/0x20 @ 1
    [ 9.408016] initcall init_basic+0x0/0x20 returned 0 after 0 usecs
    [ 9.412007] calling cls_flow_init+0x0/0x20 @ 1
    [ 9.416006] initcall cls_flow_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.424028] calling nfnetlink_init+0x0/0x70 @ 1
    [ 9.428004] Netfilter messages via NETLINK v0.30.
    [ 9.432062] initcall nfnetlink_init+0x0/0x70 returned 0 after 3906 usecs
    [ 9.440007] calling nfnetlink_queue_init+0x0/0xd0 @ 1
    [ 9.444074] initcall nfnetlink_queue_init+0x0/0xd0 returned 0 after 0 usecs
    [ 9.452007] calling nfnetlink_log_init+0x0/0xd0 @ 1
    [ 9.456025] initcall nfnetlink_log_init+0x0/0xd0 returned 0 after 0 usecs
    [ 9.464007] calling sysctl_ipv4_init+0x0/0x60 @ 1
    [ 9.472491] initcall sysctl_ipv4_init+0x0/0x60 returned 0 after 3906 usecs
    [ 9.476006] calling ipgre_init+0x0/0xd0 @ 1
    [ 9.480006] GRE over IPv4 tunneling driver
    [ 9.490216] initcall ipgre_init+0x0/0xd0 returned 0 after 7812 usecs
    [ 9.492007] calling ah4_init+0x0/0x70 @ 1
    [ 9.496009] initcall ah4_init+0x0/0x70 returned 0 after 0 usecs
    [ 9.500005] calling ipcomp4_init+0x0/0x70 @ 1
    [ 9.504007] initcall ipcomp4_init+0x0/0x70 returned 0 after 0 usecs
    [ 9.508005] calling ipip_init+0x0/0xc0 @ 1
    [ 9.512064] initcall ipip_init+0x0/0xc0 returned 0 after 0 usecs
    [ 9.516005] calling xfrm4_beet_init+0x0/0x20 @ 1
    [ 9.520007] initcall xfrm4_beet_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.524005] calling tunnel4_init+0x0/0x70 @ 1
    [ 9.528010] initcall tunnel4_init+0x0/0x70 returned 0 after 0 usecs
    [ 9.532006] calling ipv4_netfilter_init+0x0/0x20 @ 1
    [ 9.536052] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.540005] calling cubictcp_register+0x0/0x70 @ 1
    [ 9.544005] TCP cubic registered
    [ 9.548006] initcall cubictcp_register+0x0/0x70 returned 0 after 3906 usecs
    [ 9.552005] calling packet_init+0x0/0x50 @ 1
    [ 9.556007] NET: Registered protocol family 17
    [ 9.560078] initcall packet_init+0x0/0x50 returned 0 after 3906 usecs
    [ 9.564006] calling ipsec_pfkey_init+0x0/0xa0 @ 1
    [ 9.568013] NET: Registered protocol family 15
    [ 9.572047] initcall ipsec_pfkey_init+0x0/0xa0 returned 0 after 3906 usecs
    [ 9.576006] calling br_init+0x0/0xf0 @ 1
    [ 9.580754] Bridge firewalling registered
    [ 9.584064] initcall br_init+0x0/0xf0 returned 0 after 3906 usecs
    [ 9.588030] calling dsa_init_module+0x0/0x20 @ 1
    [ 9.592007] initcall dsa_init_module+0x0/0x20 returned 0 after 0 usecs
    [ 9.596005] calling edsa_init_module+0x0/0x20 @ 1
    [ 9.600007] initcall edsa_init_module+0x0/0x20 returned 0 after 0 usecs
    [ 9.604005] calling trailer_init_module+0x0/0x20 @ 1
    [ 9.608007] initcall trailer_init_module+0x0/0x20 returned 0 after 0 usecs
    [ 9.612005] calling mv88e6060_init+0x0/0x20 @ 1
    [ 9.616051] initcall mv88e6060_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.620006] calling mv88e6123_61_65_init+0x0/0x20 @ 1
    [ 9.624007] initcall mv88e6123_61_65_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.628008] calling mv88e6131_init+0x0/0x20 @ 1
    [ 9.632007] initcall mv88e6131_init+0x0/0x20 returned 0 after 0 usecs
    [ 9.636005] calling dsa_init_module+0x0/0x20 @ 1
    [ 9.640158] initcall dsa_init_module+0x0/0x20 returned 0 after 0 usecs
    [ 9.648029] calling x25_init+0x0/0x70 @ 1
    [ 9.652008] NET: Registered protocol family 9
    [ 9.656011] X.25 for Linux Version 0.2
    [ 9.660350] initcall x25_init+0x0/0x70 returned 0 after 7812 usecs
    [ 9.668007] calling rose_proto_init+0x0/0x2f0 @ 1
    [ 9.699054] NET: Registered protocol family 11
    [ 9.704192] initcall rose_proto_init+0x0/0x2f0 returned 0 after 31250 usecs
    [ 9.708008] calling ax25_init+0x0/0xb0 @ 1
    [ 9.712006] NET: Registered protocol family 3
    [ 9.716139] initcall ax25_init+0x0/0xb0 returned 0 after 7812 usecs
    [ 9.724007] calling init_sunrpc+0x0/0x80 @ 1
    [ 9.732845] RPC: Registered udp transport module.
    [ 9.736005] RPC: Registered tcp transport module.
    [ 9.740014] initcall init_sunrpc+0x0/0x80 returned 0 after 11718 usecs
    [ 9.744006] calling econet_proto_init+0x0/0x1e0 @ 1
    [ 9.748008] NET: Registered protocol family 19
    [ 9.752281] initcall econet_proto_init+0x0/0x1e0 returned 0 after 3906 usecs
    [ 9.756006] calling phonet_init+0x0/0x90 @ 1
    [ 9.760005] NET: Registered protocol family 35
    [ 9.764706] initcall phonet_init+0x0/0x90 returned 0 after 3906 usecs
    [ 9.768008] calling pep_register+0x0/0x20 @ 1
    [ 9.772337] initcall pep_register+0x0/0x20 returned 0 after 0 usecs
    [ 9.776009] calling ieee80211_init+0x0/0x30 @ 1
    [ 9.784028] ieee80211: 802.11 data/management/control stack, git-1.1.13
    [ 9.788004] ieee80211: Copyright (C) 2004-2005 Intel Corporation
    [ 9.796007] initcall ieee80211_init+0x0/0x30 returned 0 after 11718 usecs
    [ 9.804007] calling ieee80211_crypto_init+0x0/0x20 @ 1
    [ 9.808034] ieee80211_crypt: registered algorithm 'NULL'
    [ 9.816008] initcall ieee80211_crypto_init+0x0/0x20 returned 0 after 7812 usecs
    [ 9.820005] calling ieee80211_crypto_wep_init+0x0/0x20 @ 1
    [ 9.828008] ieee80211_crypt: registered algorithm 'WEP'
    [ 9.832006] initcall ieee80211_crypto_wep_init+0x0/0x20 returned 0 after 3906 usecs
    [ 9.840008] calling ieee80211_crypto_tkip_init+0x0/0x20 @ 1
    [ 9.844007] ieee80211_crypt: registered algorithm 'TKIP'
    [ 9.852008] initcall ieee80211_crypto_tkip_init+0x0/0x20 returned 0 after 7812 usecs
    [ 9.860007] calling tipc_init+0x0/0xd0 @ 1
    [ 9.864039] TIPC: Activated (version 1.6.4 compiled Oct 23 2008 16:24:21)
    [ 9.873619] NET: Registered protocol family 30
    [ 9.876029] TIPC: Started in single node mode
    [ 9.880008] initcall tipc_init+0x0/0xd0 returned 0 after 15625 usecs
    [ 9.888009] calling update_mp_table+0x0/0x520 @ 1
    [ 9.892014] initcall update_mp_table+0x0/0x520 returned 0 after 0 usecs
    [ 9.900007] calling lapic_insert_resource+0x0/0x50 @ 1
    [ 9.904009] initcall lapic_insert_resource+0x0/0x50 returned 0 after 0 usecs
    [ 9.912007] calling ioapic_insert_resources+0x0/0x60 @ 1
    [ 9.916007] initcall ioapic_insert_resources+0x0/0x60 returned 0 after 0 usecs
    [ 9.924007] calling io_apic_bug_finalize+0x0/0x20 @ 1
    [ 9.928006] initcall io_apic_bug_finalize+0x0/0x20 returned 0 after 0 usecs
    [ 9.936008] calling check_early_ioremap_leak+0x0/0x70 @ 1
    [ 9.940006] initcall check_early_ioremap_leak+0x0/0x70 returned 0 after 0 usecs
    [ 9.948007] calling pat_memtype_list_init+0x0/0x30 @ 1
    [ 9.952034] initcall pat_memtype_list_init+0x0/0x30 returned 0 after 0 usecs
    [ 9.960008] calling sched_init_debug+0x0/0x30 @ 1
    [ 9.964025] initcall sched_init_debug+0x0/0x30 returned 0 after 0 usecs
    [ 9.972009] calling init_oops_id+0x0/0x30 @ 1
    [ 9.976013] initcall init_oops_id+0x0/0x30 returned 0 after 0 usecs
    [ 9.980007] calling disable_boot_consoles+0x0/0x40 @ 1
    [ 9.988008] initcall disable_boot_consoles+0x0/0x40 returned 0 after 0 usecs
    [ 9.996008] calling pm_qos_power_init+0x0/0x90 @ 1
    [ 10.001969] initcall pm_qos_power_init+0x0/0x90 returned 0 after 0 usecs
    [ 10.004039] calling debugfs_kprobe_init+0x0/0x90 @ 1
    [ 10.008071] initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 0 usecs
    [ 10.012007] calling fail_make_request_debugfs+0x0/0x20 @ 1
    [ 10.016145] initcall fail_make_request_debugfs+0x0/0x20 returned 0 after 0 usecs
    [ 10.020006] calling fail_io_timeout_debugfs+0x0/0x20 @ 1
    [ 10.024144] initcall fail_io_timeout_debugfs+0x0/0x20 returned 0 after 0 usecs
    [ 10.028009] calling random32_reseed+0x0/0xb0 @ 1
    [ 10.032027] initcall random32_reseed+0x0/0xb0 returned 0 after 0 usecs
    [ 10.036015] calling pci_sysfs_init+0x0/0x60 @ 1
    [ 10.040527] initcall pci_sysfs_init+0x0/0x60 returned 0 after 0 usecs
    [ 10.044006] calling seqgen_init+0x0/0x10 @ 1
    [ 10.048024] initcall seqgen_init+0x0/0x10 returned 0 after 0 usecs
    [ 10.052005] calling hd_init+0x0/0x350 @ 1
    [ 10.056101] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
    [ 10.060419] initcall hd_init+0x0/0x350 returned -1 after 3906 usecs
    [ 10.064005] initcall hd_init+0x0/0x350 returned with error code -1
    [ 10.068007] calling scsi_complete_async_scans+0x0/0x110 @ 1
    [ 10.072006] initcall scsi_complete_async_scans+0x0/0x110 returned 0 after 0 usecs
    [ 10.076005] calling memmap_init+0x0/0xb0 @ 1
    [ 10.080183] initcall memmap_init+0x0/0xb0 returned 0 after 0 usecs
    [ 10.084006] calling tcp_congestion_default+0x0/0x20 @ 1
    [ 10.088007] initcall tcp_congestion_default+0x0/0x20 returned 0 after 0 usecs
    [ 10.092005] calling ip_auto_config+0x0/0xf80 @ 1
    [ 10.096025] initcall ip_auto_config+0x0/0xf80 returned 0 after 0 usecs
    [ 10.100189] md: Waiting for all devices to be available before autodetect
    [ 10.104005] md: If you don't use raid, use raid=noautodetect
    [ 10.113134] md: Autodetecting RAID arrays.
    [ 10.116006] md: Scanned 0 and added 0 devices.
    [ 10.120006] md: autorun ...
    [ 10.124004] md: ... autorun DONE.
    [ 10.140491] EXT3-fs: INFO: recovery required on readonly filesystem.
    [ 10.144017] EXT3-fs: write access will be enabled during recovery.
    [ 10.170398] kjournald starting. Commit interval 5 seconds
    [ 10.172225] EXT3-fs: recovery complete.
    [ 10.180877] EXT3-fs: mounted filesystem with ordered data mode.
    [ 10.184336] VFS: Mounted root (ext3 filesystem) readonly.
    [ 10.192086] debug: unmapping init memory ffffffff81644000..ffffffff81850000
    [ 10.196247] Write protecting the kernel read-only data: 2888k
    [ 10.204290] Testing CPA: undo ffffffff807e2000-ffffffff80ab4000
    [ 10.208160] Testing CPA: again
    [ 10.482334] SELinux: Disabled at runtime.
    [ 10.484007] SELinux: Unregistering netfilter hooks
    [ 10.548034] type=1404 audit(1224773435.548:2): selinux=0 auid=4294967295 ses=4294967295
    [ 13.239555] udev: renamed network interface eth0 to eth1
    [ 13.256430] udev: renamed network interface eth1_rename to eth0
    [ 14.370522] eth0: link down
    [ 21.557656] EXT3 FS on sda6, internal journal
    [ 21.683374] kjournald starting. Commit interval 5 seconds
    [ 21.688302] EXT3 FS on sda5, internal journal
    [ 21.692016] EXT3-fs: mounted filesystem with ordered data mode.
    [ 25.073543] warning: `sudo' uses 32-bit capabilities (legacy support in use)
    [ 32.732022] CPA self-test:
    [ 32.746184] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
    [ 32.770375] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
    [ 32.793581] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
    [ 32.796004] ok.
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  20. Re: [PATCH 35/35] x86: clean up speedctep-centrino and reduce cpumask_t usage From: Rusty Russell <rusty@rustcorp.com.au>

    On Thursday 23 October 2008 23:04:44 Ingo Molnar wrote:
    > * Rusty Russell wrote:
    > > On Thursday 23 October 2008 13:09:01 Mike Travis wrote:
    > > > 1) The #ifdef CONFIG_HOTPLUG_CPU seems unnecessary these days.
    > > > 2) The loop can simply skip over offline cpus, rather than creating a
    > > > tmp mask.
    > > > 3) set_mask is set to either a single cpu or all online cpus in a
    > > > policy. Since it's just used for set_cpus_allowed(), any offline cpus
    > > > in a policy don't matter, so we can just use cpumask_of_cpu() or the
    > > > policy->cpus.

    > >
    > > Note that this cleanup stands alone; it's just that I read this code I
    > > couldn't help but tidy it up.
    > >
    > > Ingo: do you just want to put this in your normal tree for sending to
    > > Linus?

    >
    > hm, cpufreq stuff belongs into davej's tree.
    >
    > i skipped #34 and #35 for now, we can live without them, correct?


    Definitely, they were tacked on and don't belong with the others.

    Cheers,
    Rusty.
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

+ Reply to Thread
Page 3 of 4 FirstFirst 1 2 3 4 LastLast