Inside:

* ide-generic host driver fix to not claim by default ports for
which there is a better driver available. (Borislav Petkov)

* Proper PCI Power Management support.

* More work on generic ATAPI support. (Borislav Petkov & me)

* Use/add generic helpers for device identity handling.

* Re-work of IDE settings infrastructure.

* Use special driver requests for handling IDE settings.
(Elias Oltmanns)

* Misc fixes/improvements.
(Mark de Wever, FUJITA Tomonori, Linus Torvalds, me)

Thanks to all contributors!

Also thanks to all people reviewing patches and testing linux-next
(+ reporting bugs) since without their help it wouldn't be possible
to keep the usual high-quality of IDE updates.


Linus, please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/

to receive the following updates:

drivers/ata/libata-scsi.c | 2 +-
drivers/block/hd.c | 9 +-
drivers/ide/Kconfig | 23 --
drivers/ide/Makefile | 7 +-
drivers/ide/arm/icside.c | 5 +-
drivers/ide/arm/palm_bk3710.c | 8 +-
drivers/ide/ide-acpi.c | 6 +-
drivers/ide/ide-atapi.c | 236 +++++++++++++--
drivers/ide/ide-cd.c | 72 ++---
drivers/ide/ide-disk.c | 340 ++++++++-------------
drivers/ide/ide-dma.c | 52 ++--
drivers/ide/ide-floppy.c | 668 +++++++---------------------------------
drivers/ide/ide-floppy.h | 63 ++++
drivers/ide/ide-floppy_ioctl.c | 243 +++++++++++++++
drivers/ide/ide-generic.c | 55 +++-
drivers/ide/ide-io.c | 117 +++++---
drivers/ide/ide-ioctls.c | 290 +++++++++++++++++
drivers/ide/ide-iops.c | 225 ++++----------
drivers/ide/ide-lib.c | 73 +++---
drivers/ide/ide-probe.c | 252 +++++++--------
drivers/ide/ide-proc.c | 306 ++++++-------------
drivers/ide/ide-tape.c | 478 ++++++++---------------------
drivers/ide/ide-taskfile.c | 156 ++--------
drivers/ide/ide-timings.c | 22 +-
drivers/ide/ide.c | 238 ++-------------
drivers/ide/legacy/ali14xx.c | 1 -
drivers/ide/legacy/buddha.c | 1 -
drivers/ide/legacy/dtc2278.c | 1 -
drivers/ide/legacy/falconide.c | 1 -
drivers/ide/legacy/gayle.c | 1 -
drivers/ide/legacy/ht6560b.c | 1 -
drivers/ide/legacy/ide-cs.c | 1 -
drivers/ide/legacy/macide.c | 1 -
drivers/ide/legacy/q40ide.c | 2 -
drivers/ide/legacy/qd65xx.c | 23 +-
drivers/ide/legacy/umc8672.c | 1 -
drivers/ide/pci/aec62xx.c | 5 +-
drivers/ide/pci/alim15x3.c | 9 +-
drivers/ide/pci/amd74xx.c | 8 +-
drivers/ide/pci/atiixp.c | 3 +-
drivers/ide/pci/cmd640.c | 43 ++--
drivers/ide/pci/cmd64x.c | 5 +-
drivers/ide/pci/cs5520.c | 3 +-
drivers/ide/pci/cs5530.c | 19 +-
drivers/ide/pci/cs5535.c | 14 +-
drivers/ide/pci/cy82c693.c | 4 +-
drivers/ide/pci/delkin_cb.c | 1 -
drivers/ide/pci/generic.c | 3 +-
drivers/ide/pci/hpt34x.c | 5 +-
drivers/ide/pci/hpt366.c | 77 +++--
drivers/ide/pci/it8213.c | 3 +-
drivers/ide/pci/it821x.c | 58 ++--
drivers/ide/pci/jmicron.c | 3 +-
drivers/ide/pci/ns87415.c | 9 +-
drivers/ide/pci/opti621.c | 7 +-
drivers/ide/pci/pdc202xx_new.c | 15 +-
drivers/ide/pci/pdc202xx_old.c | 11 +-
drivers/ide/pci/piix.c | 5 +-
drivers/ide/pci/rz1000.c | 1 -
drivers/ide/pci/sc1200.c | 15 +-
drivers/ide/pci/scc_pata.c | 5 +-
drivers/ide/pci/serverworks.c | 9 +-
drivers/ide/pci/sgiioc4.c | 1 -
drivers/ide/pci/siimage.c | 17 +-
drivers/ide/pci/sis5513.c | 5 +-
drivers/ide/pci/sl82c105.c | 7 +-
drivers/ide/pci/slc90e66.c | 3 +-
drivers/ide/pci/triflex.c | 3 +-
drivers/ide/pci/trm290.c | 1 -
drivers/ide/pci/via82cxxx.c | 10 +-
drivers/ide/ppc/pmac.c | 6 +-
drivers/ide/setup-pci.c | 33 ++
drivers/scsi/ide-scsi.c | 120 +++-----
include/linux/ata.h | 112 +++++++-
include/linux/ide.h | 316 ++++++++++++-------
75 files changed, 2388 insertions(+), 2566 deletions(-)
create mode 100644 drivers/ide/ide-floppy.h
create mode 100644 drivers/ide/ide-floppy_ioctl.c
create mode 100644 drivers/ide/ide-ioctls.c


Bartlomiej Zolnierkiewicz (65):
ide: remove superfluous check from ide_disk_special()
ide: cleanup ide_disk_init_mult_count()
ide: cleanup ide_fix_driveid()
ide: make drive->id an union (take 2)
ide: remove drive->driveid
ide: use ata_id_current_chs_valid()
ide-disk: use ata_id_wcache_enabled()
ide-disk: use ata_id_hpa_enabled()
libata: WIN_* -> ATA_CMD_*
ide: WIN_* -> ATA_CMD_*
hd: WIN_* -> ATA_CMD_*
ide: use ATA_* defines instead of *_STAT and *_ERR ones
ide: remove no longer needed ide_drive_t fields
ide: fix EXABYTENEST handling in probe_for_drive()
ide: enhance ide_busy_sleep()
ide: remove no longer needed BUG_ON()-s from init_irq()
ide: remove IDE_CHIPSET_* macros
ide: remove unused _IDE_C and _IDE_DISK defines
ide: remove needless drive->present checks from device drivers
ide: check drive->present in ide_get_paired_drive()
ide: remove CONFIG_IDEDISK_MULTI_MODE
ide: include only when needed
ide: call ide_proc_register_driver() later
ide: preparations for /proc/ide/hd*/settings rework
ide: /proc/ide/hd*/settings rework
ide: remove SECTOR_WORDS define
cmd640: add __set_prefetch_mode()
ide: remove read-only ->atapi_overlap field from ide_drive_t
ide: remove ->supports_dsc_overlap field from ide_driver_t
ide: factor out HDIO_*_NICE ioctl handling to ide_*_nice_ioctl()
ide: ide_dev_has_iordy() -> ata_id_has_iordy()
ide: ide_dev_is_sata() -> ata_id_is_sata()
ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()
ide: check only for CACHE FLUSH command support in ide_id_has_flush_cache()
ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()
ide: ide_id_has_flush_cache_ext() -> ata_id_flush_ext_enabled()
ide: use ata_id_is_cfa()
ide: ide_id_to_hd_driveid() -> ata_id_to_hd_driveid()
ide: lba_capacity_is_ok() -> ata_id_is_lba_capacity_ok()
hpt366: add hpt3xx_disable_fast_irq() helper
ide: add proper PCI PM support (v2)
ide: remove ->bus_state field from ide_hwif_t
ide: add ide_setting_ioctl() helper
ide: cleanup generic_ide_ioctl()
ide: move ioctls handling to ide-ioctls.c
ide: add ide_check_atapi_device() helper
ide-floppy: remove needless parens
ide-floppy: add ide_floppy_format_ioctl() helper
ide-tape: remove idetape_init_rq()
ide-{floppy,tape}: remove request stack
ide-{floppy,tape}: remove packet command stack
ide-floppy: remove MODE_SENSE_* defines
ide-scsi: cleanup ide_scsi_io_buffers()
ide: add ide_io_buffers() helper
ide-floppy: add ide_floppy_set_media_lock() helper
ide-tape: add ide_tape_set_media_lock() helper
ide: add ide_init_pc() helper
ide: add ide_queue_pc_head() helper
ide: add ide_queue_pc_tail() helper
ide-floppy: ->{srfp,wp} -> IDE_AFLAG_{SRFP,WP}
ide-floppy: move floppy ioctls handling to ide-floppy_ioctl.c
ide: add ide_set_media_lock() helper
ide: add ide_do_start_stop() helper
ide: add ide_do_test_unit_ready() helper
ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to

Borislav Petkov (2):
ide-floppy: use scatterlists for pio transfers
ide-generic: handle probing of legacy io-ports v5

Elias Oltmanns (1):
ide: Remove ide_spin_wait_hwgroup() and use special requests instead

FUJITA Tomonori (1):
ide-cd: use the new object_is_in_stack() helper

Linus Torvalds (1):
ide: re-code ide_fixstring() loop to be less evil

Mark de Wever (1):
ide-tape: Buildfix when IDETAPE_DEBUG_LOG is set to 1.


diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 59fe051..5d312dc 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -503,7 +503,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
scsi_cmd[0] = ATA_16;

scsi_cmd[4] = args[2];
- if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
+ if (args[0] == ATA_CMD_SMART) { /* hack -- ide driver does this too */
scsi_cmd[6] = args[3];
scsi_cmd[8] = args[1];
scsi_cmd[10] = 0x4f;
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index 682243b..482c0c4 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -39,6 +39,7 @@
#include
#include
#include
+#include
#include

#define REALLY_SLOW_IO
@@ -370,7 +371,7 @@ repeat:
struct hd_i_struct *disk = &hd_info[i];
disk->special_op = disk->recalibrate = 1;
hd_out(disk, disk->sect, disk->sect, disk->head-1,
- disk->cyl, WIN_SPECIFY, &reset_hd);
+ disk->cyl, ATA_CMD_INIT_DEV_PARAMS, &reset_hd);
if (reset)
goto repeat;
} else
@@ -558,7 +559,7 @@ static int do_special_op(struct hd_i_struct *disk, struct request *req)
{
if (disk->recalibrate) {
disk->recalibrate = 0;
- hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr);
+ hd_out(disk, disk->sect, 0, 0, 0, ATA_CMD_RESTORE, &recal_intr);
return reset;
}
if (disk->head > 16) {
@@ -631,13 +632,13 @@ repeat:
if (blk_fs_request(req)) {
switch (rq_data_dir(req)) {
case READ:
- hd_out(disk, nsect, sec, head, cyl, WIN_READ,
+ hd_out(disk, nsect, sec, head, cyl, ATA_CMD_PIO_READ,
&read_intr);
if (reset)
goto repeat;
break;
case WRITE:
- hd_out(disk, nsect, sec, head, cyl, WIN_WRITE,
+ hd_out(disk, nsect, sec, head, cyl, ATA_CMD_PIO_WRITE,
&write_intr);
if (reset)
goto repeat;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 052879a..b50b5da 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -131,29 +131,6 @@ config BLK_DEV_IDEDISK

If unsure, say Y.

-config IDEDISK_MULTI_MODE
- bool "Use multiple sector mode for Programmed Input/Output by default"
- help
- This setting is irrelevant for most IDE disks, with direct memory
- access, to which multiple sector mode does not apply. Multiple sector
- mode is a feature of most modern IDE hard drives, permitting the
- transfer of multiple sectors per Programmed Input/Output interrupt,
- rather than the usual one sector per interrupt. When this feature is
- enabled, it can reduce operating system overhead for disk Programmed
- Input/Output. On some systems, it also can increase the data
- throughput of Programmed Input/Output. Some drives, however, seemed
- to run slower with multiple sector mode enabled. Some drives claimed
- to support multiple sector mode, but lost data at some settings.
- Under rare circumstances, such failures could result in massive
- filesystem corruption.
-
- If you get the following error, try to say Y here:
-
- hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
- hda: set_multmode: error=0x04 { DriveStatusError }
-
- If in doubt, say N.
-
config BLK_DEV_IDECS
tristate "PCMCIA IDE support"
depends on PCMCIA
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 64e0ecd..308b8a1 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -4,8 +4,8 @@

EXTRA_CFLAGS += -Idrivers/ide

-ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o \
- ide-pio-blacklist.o
+ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
+ ide-taskfile.o ide-pio-blacklist.o

# core IDE code
ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
@@ -37,11 +37,12 @@ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o

ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
+ide-floppy_mod-y += ide-floppy.o ide-floppy_ioctl.o

obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
+obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
-obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o

ifeq ($(CONFIG_BLK_DEV_IDECS), y)
ide-cs-core-y += legacy/ide-cs.o
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index df4af40..70f5b16 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -10,7 +10,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -265,8 +264,8 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
* If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
* take care to note the values in the ID...
*/
- if (use_dma_info && drive->id->eide_dma_time > cycle_time)
- cycle_time = drive->id->eide_dma_time;
+ if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time)
+ cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME];

drive->drive_data = cycle_time;

diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 4fd91dc..122ed3c 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -27,7 +27,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -180,7 +179,7 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
val32 |= (t2i << (dev ? 8 : 0));
writel(val32, base + BK3710_DATRCVR);

- if (mate && mate->present) {
+ if (mate) {
u8 mode2 = ide_get_best_pio_mode(mate, 255, 4);

if (mode2 < mode)
@@ -213,7 +212,8 @@ static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
palm_bk3710_setudmamode(base, is_slave,
xferspeed - XFER_UDMA_0);
} else {
- palm_bk3710_setdmamode(base, is_slave, drive->id->eide_dma_min,
+ palm_bk3710_setdmamode(base, is_slave,
+ drive->id[ATA_ID_EIDE_DMA_MIN],
xferspeed);
}
}
@@ -229,7 +229,7 @@ static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio)
* Obtain the drive PIO data for tuning the Palm Chip registers
*/
cycle_time = ide_pio_cycle_time(drive, pio);
- mate = ide_get_paired_drive(drive);
+ mate = ide_get_pair_dev(drive);
palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio);
}

diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 6f70462..2427c38 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -584,7 +584,7 @@ void ide_acpi_get_timing(ide_hwif_t *hwif)
* This function executes the _STM ACPI method for the target channel.
*
* _STM requires Identify Drive data, which has to passed as an argument.
- * Unfortunately hd_driveid is a mangled version which we can't readily
+ * Unfortunately drive->id is a mangled version which we can't readily
* use; hence we'll get the information afresh.
*/
void ide_acpi_push_timing(ide_hwif_t *hwif)
@@ -614,10 +614,10 @@ void ide_acpi_push_timing(ide_hwif_t *hwif)
in_params[0].buffer.length = sizeof(struct GTM_buffer);
in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm;
in_params[1].type = ACPI_TYPE_BUFFER;
- in_params[1].buffer.length = sizeof(struct hd_driveid);
+ in_params[1].buffer.length = sizeof(ATA_ID_WORDS * 2);
in_params[1].buffer.pointer = (u8 *)&master->idbuff;
in_params[2].type = ACPI_TYPE_BUFFER;
- in_params[2].buffer.length = sizeof(struct hd_driveid);
+ in_params[2].buffer.length = sizeof(ATA_ID_WORDS * 2);
in_params[2].buffer.pointer = (u8 *)&slave->idbuff;
/* Output buffer: _STM has no output */

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index adf04f9..608c5ba 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -14,12 +14,201 @@
#define debug_log(fmt, args...) do {} while (0)
#endif

+/*
+ * Check whether we can support a device,
+ * based on the ATAPI IDENTIFY command results.
+ */
+int ide_check_atapi_device(ide_drive_t *drive, const char *s)
+{
+ u16 *id = drive->id;
+ u8 gcw[2], protocol, device_type, removable, drq_type, packet_size;
+
+ *((u16 *)&gcw) = id[ATA_ID_CONFIG];
+
+ protocol = (gcw[1] & 0xC0) >> 6;
+ device_type = gcw[1] & 0x1F;
+ removable = (gcw[0] & 0x80) >> 7;
+ drq_type = (gcw[0] & 0x60) >> 5;
+ packet_size = gcw[0] & 0x03;
+
+#ifdef CONFIG_PPC
+ /* kludge for Apple PowerBook internal zip */
+ if (drive->media == ide_floppy && device_type == 5 &&
+ !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") &&
+ strstr((char *)&id[ATA_ID_PROD], "ZIP"))
+ device_type = 0;
+#endif
+
+ if (protocol != 2)
+ printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n",
+ s, drive->name, protocol);
+ else if ((drive->media == ide_floppy && device_type != 0) ||
+ (drive->media == ide_tape && device_type != 1))
+ printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n",
+ s, drive->name, device_type);
+ else if (removable == 0)
+ printk(KERN_ERR "%s: %s: the removable flag is not set\n",
+ s, drive->name);
+ else if (drive->media == ide_floppy && drq_type == 3)
+ printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not "
+ "supported\n", s, drive->name, drq_type);
+ else if (packet_size != 0)
+ printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 "
+ "bytes\n", s, drive->name, packet_size);
+ else
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_check_atapi_device);
+
+/* PIO data transfer routine using the scatter gather table. */
+int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ unsigned int bcount, int write)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+ xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data;
+ struct scatterlist *sg = pc->sg;
+ char *buf;
+ int count, done = 0;
+
+ while (bcount) {
+ count = min(sg->length - pc->b_count, bcount);
+
+ if (PageHighMem(sg_page(sg))) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset;
+ xf(drive, NULL, buf + pc->b_count, count);
+ kunmap_atomic(buf - sg->offset, KM_IRQ0);
+ local_irq_restore(flags);
+ } else {
+ buf = sg_virt(sg);
+ xf(drive, NULL, buf + pc->b_count, count);
+ }
+
+ bcount -= count;
+ pc->b_count += count;
+ done += count;
+
+ if (pc->b_count == sg->length) {
+ if (!--pc->sg_cnt)
+ break;
+ pc->sg = sg = sg_next(sg);
+ pc->b_count = 0;
+ }
+ }
+
+ if (bcount) {
+ printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name,
+ bcount, write ? "padding with zeros"
+ : "discarding data");
+ ide_pad_transfer(drive, write, bcount);
+ }
+
+ return done;
+}
+EXPORT_SYMBOL_GPL(ide_io_buffers);
+
+void ide_init_pc(struct ide_atapi_pc *pc)
+{
+ memset(pc, 0, sizeof(*pc));
+ pc->buf = pc->pc_buf;
+ pc->buf_size = IDE_PC_BUFFER_SIZE;
+}
+EXPORT_SYMBOL_GPL(ide_init_pc);
+
+/*
+ * Generate a new packet command request in front of the request queue, before
+ * the current request, so that it will be processed immediately, on the next
+ * pass through the driver.
+ */
+void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
+ struct ide_atapi_pc *pc, struct request *rq)
+{
+ blk_rq_init(NULL, rq);
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd_flags |= REQ_PREEMPT;
+ rq->buffer = (char *)pc;
+ rq->rq_disk = disk;
+ memcpy(rq->cmd, pc->c, 12);
+ if (drive->media == ide_tape)
+ rq->cmd[13] = REQ_IDETAPE_PC1;
+ ide_do_drive_cmd(drive, rq);
+}
+EXPORT_SYMBOL_GPL(ide_queue_pc_head);
+
+/*
+ * Add a special packet command request to the tail of the request queue,
+ * and wait for it to be serviced.
+ */
+int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
+ struct ide_atapi_pc *pc)
+{
+ struct request *rq;
+ int error;
+
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->buffer = (char *)pc;
+ memcpy(rq->cmd, pc->c, 12);
+ if (drive->media == ide_tape)
+ rq->cmd[13] = REQ_IDETAPE_PC1;
+ error = blk_execute_rq(drive->queue, disk, rq, 0);
+ blk_put_request(rq);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(ide_queue_pc_tail);
+
+int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
+{
+ struct ide_atapi_pc pc;
+
+ ide_init_pc(&pc);
+ pc.c[0] = TEST_UNIT_READY;
+
+ return ide_queue_pc_tail(drive, disk, &pc);
+}
+EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);
+
+int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
+{
+ struct ide_atapi_pc pc;
+
+ ide_init_pc(&pc);
+ pc.c[0] = START_STOP;
+ pc.c[4] = start;
+
+ if (drive->media == ide_tape)
+ pc.flags |= PC_FLAG_WAIT_FOR_DSC;
+
+ return ide_queue_pc_tail(drive, disk, &pc);
+}
+EXPORT_SYMBOL_GPL(ide_do_start_stop);
+
+int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
+{
+ struct ide_atapi_pc pc;
+
+ if (drive->atapi_flags & IDE_AFLAG_NO_DOORLOCK)
+ return 0;
+
+ ide_init_pc(&pc);
+ pc.c[0] = ALLOW_MEDIUM_REMOVAL;
+ pc.c[4] = on;
+
+ return ide_queue_pc_tail(drive, disk, &pc);
+}
+EXPORT_SYMBOL_GPL(ide_set_media_lock);
+
/* TODO: unify the code thus making some arguments go away */
ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
- void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
+ int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
@@ -41,7 +230,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,

if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
if (hwif->dma_ops->dma_end(drive) ||
- (drive->media == ide_tape && !scsi && (stat & ERR_STAT))) {
+ (drive->media == ide_tape && !scsi && (stat & ATA_ERR))) {
if (drive->media == ide_floppy && !scsi)
printk(KERN_ERR "%s: DMA %s error\n",
drive->name, rq_data_dir(pc->rq)
@@ -56,7 +245,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
}

/* No more interrupts */
- if ((stat & DRQ_STAT) == 0) {
+ if ((stat & ATA_DRQ) == 0) {
debug_log("Packet command completed, %d bytes transferred\n",
pc->xferred);

@@ -65,10 +254,10 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
local_irq_enable_in_hardirq();

if (drive->media == ide_tape && !scsi &&
- (stat & ERR_STAT) && rq->cmd[0] == REQUEST_SENSE)
- stat &= ~ERR_STAT;
+ (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE)
+ stat &= ~ATA_ERR;

- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
+ if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) {
/* Error detected */
debug_log("%s: I/O error\n", drive->name);

@@ -95,7 +284,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
cmd_finished:
pc->error = 0;
if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
- (stat & SEEK_STAT) == 0) {
+ (stat & ATA_DSC) == 0) {
dsc_handle(drive);
return ide_stopped;
}
@@ -117,17 +306,18 @@ cmd_finished:
/* Get the number of bytes to transfer on this interrupt. */
ide_read_bcount_and_ireason(drive, &bcount, &ireason);

- if (ireason & CD) {
+ if (ireason & ATAPI_COD) {
printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
return ide_do_reset(drive);
}

- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
+ if (((ireason & ATAPI_IO) == ATAPI_IO) ==
+ !!(pc->flags & PC_FLAG_WRITING)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
"to %s!\n", drive->name,
- (ireason & IO) ? "Write" : "Read",
- (ireason & IO) ? "Read" : "Write");
+ (ireason & ATAPI_IO) ? "Write" : "Read",
+ (ireason & ATAPI_IO) ? "Read" : "Write");
return ide_do_reset(drive);
}

@@ -171,9 +361,14 @@ cmd_finished:

if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
(drive->media == ide_tape && !scsi && pc->bh) ||
- (scsi && pc->sg))
- io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING));
- else
+ (scsi && pc->sg)) {
+ int done = io_buffers(drive, pc, bcount,
+ !!(pc->flags & PC_FLAG_WRITING));
+
+ /* FIXME: don't do partial completions */
+ if (drive->media == ide_floppy && !scsi)
+ ide_end_request(drive, 1, done >> 9);
+ } else
xferfunc(drive, NULL, pc->cur_pos, bcount);

/* Update the current position */
@@ -205,7 +400,8 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
{
int retries = 100;

- while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
+ while (retries-- && ((ireason & ATAPI_COD) == 0 ||
+ (ireason & ATAPI_IO))) {
printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
"a packet command, retrying\n", drive->name);
udelay(100);
@@ -214,8 +410,8 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
"a packet command, ignoring\n",
drive->name);
- ireason |= CD;
- ireason &= ~IO;
+ ireason |= ATAPI_COD;
+ ireason &= ~ATAPI_IO;
}
}

@@ -231,7 +427,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
ide_startstop_t startstop;
u8 ireason;

- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
printk(KERN_ERR "%s: Strange, packet command initiated yet "
"DRQ isn't asserted\n", drive->name);
return startstop;
@@ -241,7 +437,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
if (drive->media == ide_tape && !drive->scsi)
ireason = ide_wait_ireason(drive, ireason);

- if ((ireason & CD) == 0 || (ireason & IO)) {
+ if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
"a packet command\n", drive->name);
return ide_do_reset(drive);
@@ -303,7 +499,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,

/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
- ide_execute_command(drive, WIN_PACKETCMD, handler,
+ ide_execute_command(drive, ATA_CMD_PACKET, handler,
timeout, NULL);
return ide_started;
} else {
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 03c2cb6..465a92c 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -436,7 +436,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
ide_dump_status_no_sense(drive, "media error (blank)",
stat);
do_end_request = 1;
- } else if ((err & ~ABRT_ERR) != 0) {
+ } else if ((err & ~ATA_ABORTED) != 0) {
/* go to the default handler for other errors */
ide_error(drive, "cdrom_decode_status", stat);
return 1;
@@ -457,7 +457,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
* If we got a CHECK_CONDITION status, queue
* a request sense command.
*/
- if (stat & ERR_STAT)
+ if (stat & ATA_ERR)
cdrom_queue_request_sense(drive, NULL, NULL);
} else {
blk_dump_rq_flags(rq, "ide-cd: bad rq");
@@ -468,7 +468,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
return 1;

end_request:
- if (stat & ERR_STAT) {
+ if (stat & ATA_ERR) {
unsigned long flags;

spin_lock_irqsave(&ide_lock, flags);
@@ -541,7 +541,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
drive->waiting_for_dma = 0;

/* packet command */
- ide_execute_command(drive, WIN_PACKETCMD, handler,
+ ide_execute_command(drive, ATA_CMD_PACKET, handler,
ATAPI_WAIT_PC, cdrom_timer_expiry);
return ide_started;
} else {
@@ -574,7 +574,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
*/

/* check for errors */
- if (cdrom_decode_status(drive, DRQ_STAT, NULL))
+ if (cdrom_decode_status(drive, ATA_DRQ, NULL))
return ide_stopped;

/* ok, next interrupt will be DMA interrupt */
@@ -582,8 +582,8 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
drive->waiting_for_dma = 1;
} else {
/* otherwise, we must wait for DRQ to get set */
- if (ide_wait_stat(&startstop, drive, DRQ_STAT,
- BUSY_STAT, WAIT_READY))
+ if (ide_wait_stat(&startstop, drive, ATA_DRQ,
+ ATA_BUSY, WAIT_READY))
return startstop;
}

@@ -938,7 +938,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
thislen = len;

/* If DRQ is clear, the command has completed. */
- if ((stat & DRQ_STAT) == 0) {
+ if ((stat & ATA_DRQ) == 0) {
if (blk_fs_request(rq)) {
/*
* If we're not done reading/writing, complain.
@@ -1164,13 +1164,12 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
struct request_queue *q = drive->queue;
unsigned int alignment;
- unsigned long addr;
- unsigned long stack_mask = ~(THREAD_SIZE - 1);
+ char *buf;

if (rq->bio)
- addr = (unsigned long)bio_data(rq->bio);
+ buf = bio_data(rq->bio);
else
- addr = (unsigned long)rq->data;
+ buf = rq->data;

info->dma = drive->using_dma;

@@ -1181,11 +1180,8 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
* separate masks.
*/
alignment = queue_dma_alignment(q) | q->dma_pad_mask;
- if (addr & alignment || rq->data_len & alignment)
- info->dma = 0;
-
- if (!((addr & stack_mask) ^
- ((unsigned long)current->stack & stack_mask)))
+ if ((unsigned long)buf & alignment || rq->data_len & alignment
+ || object_is_on_stack(buf))
info->dma = 0;
}
}
@@ -1206,7 +1202,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
unsigned long elapsed = jiffies - info->start_seek;
int stat = hwif->tp_ops->read_status(hwif);

- if ((stat & SEEK_STAT) != SEEK_STAT) {
+ if ((stat & ATA_DSC) != ATA_DSC) {
if (elapsed < IDECD_SEEK_TIMEOUT) {
ide_stall_queue(drive,
IDECD_SEEK_TIMER);
@@ -1813,13 +1809,12 @@ static ide_proc_entry_t idecd_proc[] = {
{ NULL, 0, NULL, NULL }
};

-static void ide_cdrom_add_settings(ide_drive_t *drive)
-{
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
- &drive->dsc_overlap, NULL);
-}
-#else
-static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; }
+ide_devset_rw_field(dsc_overlap, dsc_overlap);
+
+static const struct ide_proc_devset idecd_settings[] = {
+ IDE_PROC_DEVSET(dsc_overlap, 0, 1),
+ { 0 },
+};
#endif

static const struct cd_list_entry ide_cd_quirks_list[] = {
@@ -1866,14 +1861,14 @@ static const struct cd_list_entry ide_cd_quirks_list[] = {
{ NULL, NULL, 0 }
};

-static unsigned int ide_cd_flags(struct hd_driveid *id)
+static unsigned int ide_cd_flags(u16 *id)
{
const struct cd_list_entry *cle = ide_cd_quirks_list;

while (cle->id_model) {
- if (strcmp(cle->id_model, id->model) == 0 &&
+ if (strcmp(cle->id_model, (char *)&id[ATA_ID_PROD]) == 0 &&
(cle->id_firmware == NULL ||
- strstr(id->fw_rev, cle->id_firmware)))
+ strstr((char *)&id[ATA_ID_FW_REV], cle->id_firmware)))
return cle->cd_flags;
cle++;
}
@@ -1885,7 +1880,8 @@ static int ide_cdrom_setup(ide_drive_t *drive)
{
struct cdrom_info *cd = drive->driver_data;
struct cdrom_device_info *cdi = &cd->devinfo;
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
+ char *fw_rev = (char *)&id[ATA_ID_FW_REV];
int nslots;

blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
@@ -1900,15 +1896,15 @@ static int ide_cdrom_setup(ide_drive_t *drive)
drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
ide_cd_flags(id);

- if ((id->config & 0x0060) == 0x20)
+ if ((id[ATA_ID_CONFIG] & 0x0060) == 0x20)
drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;

if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
- id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
+ fw_rev[4] == '1' && fw_rev[6] <= '2')
drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
IDE_AFLAG_TOCADDR_AS_BCD);
else if ((drive->atapi_flags & IDE_AFLAG_VERTOS_600_ESD) &&
- id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
+ fw_rev[4] == '1' && fw_rev[6] <= '2')
drive->atapi_flags |= IDE_AFLAG_TOCTRACKS_AS_BCD;
else if (drive->atapi_flags & IDE_AFLAG_SANYO_3CD)
/* 3 => use CD in slot 0 */
@@ -1927,7 +1923,8 @@ static int ide_cdrom_setup(ide_drive_t *drive)
cd->devinfo.handle = NULL;
return 1;
}
- ide_cdrom_add_settings(drive);
+
+ ide_proc_register_driver(drive, cd->driver);
return 0;
}

@@ -1972,12 +1969,12 @@ static ide_driver_t ide_cdrom_driver = {
.remove = ide_cd_remove,
.version = IDECD_VERSION,
.media = ide_cdrom,
- .supports_dsc_overlap = 1,
.do_request = ide_cd_do_request,
.end_request = ide_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idecd_proc,
+ .settings = idecd_settings,
#endif
};

@@ -2112,10 +2109,10 @@ static int ide_cd_probe(ide_drive_t *drive)

if (!strstr("ide-cdrom", drive->driver_req))
goto failed;
- if (!drive->present)
- goto failed;
+
if (drive->media != ide_cdrom && drive->media != ide_optical)
goto failed;
+
/* skip drives that we were told to ignore */
if (ignore != NULL) {
if (strstr(ignore, drive->name)) {
@@ -2137,8 +2134,6 @@ static int ide_cd_probe(ide_drive_t *drive)

ide_init_disk(g, drive);

- ide_proc_register_driver(drive, &ide_cdrom_driver);
-
kref_init(&info->kref);

info->drive = drive;
@@ -2153,7 +2148,6 @@ static int ide_cd_probe(ide_drive_t *drive)
g->driverfs_dev = &drive->gendev;
g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
if (ide_cdrom_setup(drive)) {
- ide_proc_unregister_driver(drive, &ide_cdrom_driver);
ide_cd_release(&info->kref);
goto failed;
}
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 33ea8c0..01846f2 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -30,10 +30,8 @@
#include
#include
#include
-
-#define _IDE_DISK
-
#include
+#include

#include
#include
@@ -90,68 +88,19 @@ static void ide_disk_put(struct ide_disk_obj *idkp)
mutex_unlock(&idedisk_ref_mutex);
}

-/*
- * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity"
- * value for this drive (from its reported identification information).
- *
- * Returns: 1 if lba_capacity looks sensible
- * 0 otherwise
- *
- * It is called only once for each drive.
- */
-static int lba_capacity_is_ok(struct hd_driveid *id)
-{
- unsigned long lba_sects, chs_sects, head, tail;
-
- /* No non-LBA info .. so valid! */
- if (id->cyls == 0)
- return 1;
-
- /*
- * The ATA spec tells large drives to return
- * C/H/S = 16383/16/63 independent of their size.
- * Some drives can be jumpered to use 15 heads instead of 16.
- * Some drives can be jumpered to use 4092 cyls instead of 16383.
- */
- if ((id->cyls == 16383
- || (id->cyls == 4092 && id->cur_cyls == 16383)) &&
- id->sectors == 63 &&
- (id->heads == 15 || id->heads == 16) &&
- (id->lba_capacity >= 16383*63*id->heads))
- return 1;
-
- lba_sects = id->lba_capacity;
- chs_sects = id->cyls * id->heads * id->sectors;
-
- /* perform a rough sanity check on lba_sects: within 10% is OK */
- if ((lba_sects - chs_sects) < chs_sects/10)
- return 1;
-
- /* some drives have the word order reversed */
- head = ((lba_sects >> 16) & 0xffff);
- tail = (lba_sects & 0xffff);
- lba_sects = (head | (tail << 16));
- if ((lba_sects - chs_sects) < chs_sects/10) {
- id->lba_capacity = lba_sects;
- return 1; /* lba_capacity is (now) good */
- }
-
- return 0; /* lba_capacity value may be bad */
-}
-
static const u8 ide_rw_cmds[] = {
- WIN_MULTREAD,
- WIN_MULTWRITE,
- WIN_MULTREAD_EXT,
- WIN_MULTWRITE_EXT,
- WIN_READ,
- WIN_WRITE,
- WIN_READ_EXT,
- WIN_WRITE_EXT,
- WIN_READDMA,
- WIN_WRITEDMA,
- WIN_READDMA_EXT,
- WIN_WRITEDMA_EXT,
+ ATA_CMD_READ_MULTI,
+ ATA_CMD_WRITE_MULTI,
+ ATA_CMD_READ_MULTI_EXT,
+ ATA_CMD_WRITE_MULTI_EXT,
+ ATA_CMD_PIO_READ,
+ ATA_CMD_PIO_WRITE,
+ ATA_CMD_PIO_READ_EXT,
+ ATA_CMD_PIO_WRITE_EXT,
+ ATA_CMD_READ,
+ ATA_CMD_WRITE,
+ ATA_CMD_READ_EXT,
+ ATA_CMD_WRITE_EXT,
};

static const u8 ide_data_phases[] = {
@@ -322,9 +271,9 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
/* Create IDE/ATA command request structure */
memset(&args, 0, sizeof(ide_task_t));
if (lba48)
- tf->command = WIN_READ_NATIVE_MAX_EXT;
+ tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
else
- tf->command = WIN_READ_NATIVE_MAX;
+ tf->command = ATA_CMD_READ_NATIVE_MAX;
tf->device = ATA_LBA;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
if (lba48)
@@ -359,10 +308,10 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
tf->hob_lbal = (addr_req >>= 8) & 0xff;
tf->hob_lbam = (addr_req >>= 8) & 0xff;
tf->hob_lbah = (addr_req >>= 8) & 0xff;
- tf->command = WIN_SET_MAX_EXT;
+ tf->command = ATA_CMD_SET_MAX_EXT;
} else {
tf->device = (addr_req >>= 8) & 0x0f;
- tf->command = WIN_SET_MAX;
+ tf->command = ATA_CMD_SET_MAX;
}
tf->device |= ATA_LBA;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
@@ -385,25 +334,6 @@ static unsigned long long sectors_to_MB(unsigned long long n)
}

/*
- * Bits 10 of command_set_1 and cfs_enable_1 must be equal,
- * so on non-buggy drives we need test only one.
- * However, we should also check whether these fields are valid.
- */
-static inline int idedisk_supports_hpa(const struct hd_driveid *id)
-{
- return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400);
-}
-
-/*
- * The same here.
- */
-static inline int idedisk_supports_lba48(const struct hd_driveid *id)
-{
- return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400)
- && id->lba_capacity_2;
-}
-
-/*
* Some disks report total number of sectors instead of
* maximum sector address. We list them here.
*/
@@ -417,7 +347,7 @@ static const struct drive_list_entry hpa_list[] = {
static void idedisk_check_hpa(ide_drive_t *drive)
{
unsigned long long capacity, set_max;
- int lba48 = idedisk_supports_lba48(drive->id);
+ int lba48 = ata_id_lba48_enabled(drive->id);

capacity = drive->capacity64;

@@ -453,23 +383,23 @@ static void idedisk_check_hpa(ide_drive_t *drive)

static void init_idedisk_capacity(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
/*
* If this drive supports the Host Protected Area feature set,
* then we may need to change our opinion about the drive's capacity.
*/
- int hpa = idedisk_supports_hpa(id);
+ int hpa = ata_id_hpa_enabled(id);

- if (idedisk_supports_lba48(id)) {
+ if (ata_id_lba48_enabled(id)) {
/* drive speaks 48-bit LBA */
drive->select.b.lba = 1;
- drive->capacity64 = id->lba_capacity_2;
+ drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
if (hpa)
idedisk_check_hpa(drive);
- } else if ((id->capability & 2) && lba_capacity_is_ok(id)) {
+ } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
/* drive speaks 28-bit LBA */
drive->select.b.lba = 1;
- drive->capacity64 = id->lba_capacity;
+ drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
if (hpa)
idedisk_check_hpa(drive);
} else {
@@ -480,7 +410,7 @@ static void init_idedisk_capacity(ide_drive_t *drive)

static sector_t idedisk_capacity(ide_drive_t *drive)
{
- return drive->capacity64 - drive->sect0;
+ return drive->capacity64;
}

#ifdef CONFIG_IDE_PROC_FS
@@ -490,10 +420,10 @@ static int smart_enable(ide_drive_t *drive)
struct ide_taskfile *tf = &args.tf;

memset(&args, 0, sizeof(ide_task_t));
- tf->feature = SMART_ENABLE;
- tf->lbam = SMART_LCYL_PASS;
- tf->lbah = SMART_HCYL_PASS;
- tf->command = WIN_SMART;
+ tf->feature = ATA_SMART_ENABLE;
+ tf->lbam = ATA_SMART_LBAM_PASS;
+ tf->lbah = ATA_SMART_LBAH_PASS;
+ tf->command = ATA_CMD_SMART;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
return ide_no_data_taskfile(drive, &args);
}
@@ -506,9 +436,9 @@ static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
memset(&args, 0, sizeof(ide_task_t));
tf->feature = sub_cmd;
tf->nsect = 0x01;
- tf->lbam = SMART_LCYL_PASS;
- tf->lbah = SMART_HCYL_PASS;
- tf->command = WIN_SMART;
+ tf->lbam = ATA_SMART_LBAM_PASS;
+ tf->lbah = ATA_SMART_LBAH_PASS;
+ tf->command = ATA_CMD_SMART;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
args.data_phase = TASKFILE_IN;
(void) smart_enable(drive);
@@ -523,7 +453,7 @@ static int proc_idedisk_read_cache
int len;

if (drive->id_read)
- len = sprintf(out, "%i\n", drive->id->buf_size / 2);
+ len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2);
else
len = sprintf(out, "(none)\n");

@@ -549,13 +479,14 @@ static int proc_idedisk_read_smart(char *page, char **start, off_t off,

if (get_smart_data(drive, page, sub_cmd) == 0) {
unsigned short *val = (unsigned short *) page;
- char *out = ((char *)val) + (SECTOR_WORDS * 4);
+ char *out = (char *)val + SECTOR_SIZE;
+
page = out;
do {
out += sprintf(out, "%04x%c", le16_to_cpu(*val),
(++i & 7) ? ' ' : '\n');
val += 1;
- } while (i < (SECTOR_WORDS * 2));
+ } while (i < SECTOR_SIZE / 2);
len = out - page;
}

@@ -566,14 +497,14 @@ static int proc_idedisk_read_sv
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
return proc_idedisk_read_smart(page, start, off, count, eof, data,
- SMART_READ_VALUES);
+ ATA_SMART_READ_VALUES);
}

static int proc_idedisk_read_st
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
return proc_idedisk_read_smart(page, start, off, count, eof, data,
- SMART_READ_THRESHOLDS);
+ ATA_SMART_READ_THRESHOLDS);
}

static ide_proc_entry_t idedisk_proc[] = {
@@ -595,11 +526,11 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
BUG_ON(task == NULL);

memset(task, 0, sizeof(*task));
- if (ide_id_has_flush_cache_ext(drive->id) &&
+ if (ata_id_flush_ext_enabled(drive->id) &&
(drive->capacity64 >= (1UL << 28)))
- task->tf.command = WIN_FLUSH_CACHE_EXT;
+ task->tf.command = ATA_CMD_FLUSH_EXT;
else
- task->tf.command = WIN_FLUSH_CACHE;
+ task->tf.command = ATA_CMD_FLUSH;
task->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
IDE_TFLAG_DYN;
task->data_phase = TASKFILE_NO_DATA;
@@ -609,6 +540,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
rq->special = task;
}

+ide_devset_get(multcount, mult_count);
+
/*
* This is tightly woven into the driver->do_special can not touch.
* DON'T do it again until a total personality rewrite is committed.
@@ -618,7 +551,7 @@ static int set_multcount(ide_drive_t *drive, int arg)
struct request *rq;
int error;

- if (arg < 0 || arg > drive->id->max_multsect)
+ if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
return -EINVAL;

if (drive->special.b.set_multmode)
@@ -635,22 +568,21 @@ static int set_multcount(ide_drive_t *drive, int arg)
return (drive->mult_count == arg) ? 0 : -EIO;
}

+ide_devset_get(nowerr, nowerr);
+
static int set_nowerr(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;

- if (ide_spin_wait_hwgroup(drive))
- return -EBUSY;
drive->nowerr = arg;
drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
- spin_unlock_irq(&ide_lock);
return 0;
}

static void update_ordered(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
unsigned ordered = QUEUE_ORDERED_NONE;
prepare_flush_fn *prep_fn = NULL;

@@ -666,9 +598,9 @@ static void update_ordered(ide_drive_t *drive)
* not available so we don't need to recheck that.
*/
capacity = idedisk_capacity(drive);
- barrier = ide_id_has_flush_cache(id) && !drive->noflush &&
+ barrier = ata_id_flush_enabled(id) && !drive->noflush &&
(drive->addressing == 0 || capacity <= (1ULL << 28) ||
- ide_id_has_flush_cache_ext(id));
+ ata_id_flush_ext_enabled(id));

printk(KERN_INFO "%s: cache flushes %ssupported\n",
drive->name, barrier ? "" : "not ");
@@ -683,7 +615,9 @@ static void update_ordered(ide_drive_t *drive)
blk_queue_ordered(drive->queue, ordered, prep_fn);
}

-static int write_cache(ide_drive_t *drive, int arg)
+ide_devset_get(wcache, wcache);
+
+static int set_wcache(ide_drive_t *drive, int arg)
{
ide_task_t args;
int err = 1;
@@ -691,11 +625,11 @@ static int write_cache(ide_drive_t *drive, int arg)
if (arg < 0 || arg > 1)
return -EINVAL;

- if (ide_id_has_flush_cache(drive->id)) {
+ if (ata_id_flush_enabled(drive->id)) {
memset(&args, 0, sizeof(ide_task_t));
args.tf.feature = arg ?
- SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
- args.tf.command = WIN_SETFEATURES;
+ SETFEATURES_WC_ON : SETFEATURES_WC_OFF;
+ args.tf.command = ATA_CMD_SET_FEATURES;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
err = ide_no_data_taskfile(drive, &args);
if (err == 0)
@@ -712,14 +646,16 @@ static int do_idedisk_flushcache(ide_drive_t *drive)
ide_task_t args;

memset(&args, 0, sizeof(ide_task_t));
- if (ide_id_has_flush_cache_ext(drive->id))
- args.tf.command = WIN_FLUSH_CACHE_EXT;
+ if (ata_id_flush_ext_enabled(drive->id))
+ args.tf.command = ATA_CMD_FLUSH_EXT;
else
- args.tf.command = WIN_FLUSH_CACHE;
+ args.tf.command = ATA_CMD_FLUSH;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
return ide_no_data_taskfile(drive, &args);
}

+ide_devset_get(acoustic, acoustic);
+
static int set_acoustic(ide_drive_t *drive, int arg)
{
ide_task_t args;
@@ -728,22 +664,24 @@ static int set_acoustic(ide_drive_t *drive, int arg)
return -EINVAL;

memset(&args, 0, sizeof(ide_task_t));
- args.tf.feature = arg ? SETFEATURES_EN_AAM : SETFEATURES_DIS_AAM;
+ args.tf.feature = arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF;
args.tf.nsect = arg;
- args.tf.command = WIN_SETFEATURES;
+ args.tf.command = ATA_CMD_SET_FEATURES;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
ide_no_data_taskfile(drive, &args);
drive->acoustic = arg;
return 0;
}

+ide_devset_get(addressing, addressing);
+
/*
* drive->addressing:
* 0: 28-bit
* 1: 48-bit
* 2: 48-bit capable doing 28-bit
*/
-static int set_lba_addressing(ide_drive_t *drive, int arg)
+static int set_addressing(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 2)
return -EINVAL;
@@ -753,52 +691,54 @@ static int set_lba_addressing(ide_drive_t *drive, int arg)
if (drive->hwif->host_flags & IDE_HFLAG_NO_LBA48)
return 0;

- if (!idedisk_supports_lba48(drive->id))
+ if (ata_id_lba48_enabled(drive->id) == 0)
return -EIO;
+
drive->addressing = arg;
+
return 0;
}

+ide_devset_rw(acoustic, acoustic);
+ide_devset_rw(address, addressing);
+ide_devset_rw(multcount, multcount);
+ide_devset_rw(wcache, wcache);
+
+ide_devset_rw_sync(nowerr, nowerr);
+
#ifdef CONFIG_IDE_PROC_FS
-static void idedisk_add_settings(ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
-
- ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 65535, 1, 1,
- &drive->bios_cyl, NULL);
- ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
- &drive->bios_head, NULL);
- ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1,
- &drive->bios_sect, NULL);
- ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1,
- &drive->addressing, set_lba_addressing);
- ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0,
- id->max_multsect, 1, 1, &drive->mult_count,
- set_multcount);
- ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
- &drive->nowerr, set_nowerr);
- ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1,
- &drive->lun, NULL);
- ide_add_setting(drive, "wcache", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
- &drive->wcache, write_cache);
- ide_add_setting(drive, "acoustic", SETTING_RW, TYPE_BYTE, 0, 254, 1, 1,
- &drive->acoustic, set_acoustic);
- ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1,
- &drive->failures, NULL);
- ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535,
- 1, 1, &drive->max_failures, NULL);
-}
-#else
-static inline void idedisk_add_settings(ide_drive_t *drive) { ; }
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);
+ide_devset_rw_field(failures, failures);
+ide_devset_rw_field(lun, lun);
+ide_devset_rw_field(max_failures, max_failures);
+
+static const struct ide_proc_devset idedisk_settings[] = {
+ IDE_PROC_DEVSET(acoustic, 0, 254),
+ IDE_PROC_DEVSET(address, 0, 2),
+ IDE_PROC_DEVSET(bios_cyl, 0, 65535),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(failures, 0, 65535),
+ IDE_PROC_DEVSET(lun, 0, 7),
+ IDE_PROC_DEVSET(max_failures, 0, 65535),
+ IDE_PROC_DEVSET(multcount, 0, 16),
+ IDE_PROC_DEVSET(nowerr, 0, 1),
+ IDE_PROC_DEVSET(wcache, 0, 1),
+ { 0 },
+};
#endif

static void idedisk_setup(ide_drive_t *drive)
{
+ struct ide_disk_obj *idkp = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
+ char *m = (char *)&id[ATA_ID_PROD];
unsigned long long capacity;

- idedisk_add_settings(drive);
+ ide_proc_register_driver(drive, idkp->driver);

if (drive->id_read == 0)
return;
@@ -807,11 +747,11 @@ static void idedisk_setup(ide_drive_t *drive)
/*
* Removable disks (eg. SYQUEST); ignore 'WD' drives
*/
- if (id->model[0] != 'W' || id->model[1] != 'D')
+ if (m[0] != 'W' || m[1] != 'D')
drive->doorlocking = 1;
}

- (void)set_lba_addressing(drive, 1);
+ (void)set_addressing(drive, 1);

if (drive->addressing == 1) {
int max_s = 2048;
@@ -853,8 +793,7 @@ static void idedisk_setup(ide_drive_t *drive)
capacity = idedisk_capacity(drive);

if (!drive->forced_geom) {
-
- if (idedisk_supports_lba48(drive->id)) {
+ if (ata_id_lba48_enabled(drive->id)) {
/* compatibility */
drive->bios_sect = 63;
drive->bios_head = 255;
@@ -880,22 +819,22 @@ static void idedisk_setup(ide_drive_t *drive)
drive->name, capacity, sectors_to_MB(capacity));

/* Only print cache size when it was specified */
- if (id->buf_size)
- printk(KERN_CONT " w/%dKiB Cache", id->buf_size / 2);
+ if (id[ATA_ID_BUF_SIZE])
+ printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);

printk(KERN_CONT ", CHS=%d/%d/%d\n",
drive->bios_cyl, drive->bios_head, drive->bios_sect);

/* write cache enabled? */
- if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5)))
+ if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
drive->wcache = 1;

- write_cache(drive, 1);
+ set_wcache(drive, 1);
}

static void ide_cacheflush_p(ide_drive_t *drive)
{
- if (!drive->wcache || !ide_id_has_flush_cache(drive->id))
+ if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0)
return;

if (do_idedisk_flushcache(drive))
@@ -937,7 +876,7 @@ static int ide_disk_probe(ide_drive_t *drive);
*/
static void ide_disk_resume(ide_drive_t *drive)
{
- if (idedisk_supports_hpa(drive->id))
+ if (ata_id_hpa_enabled(drive->id))
init_idedisk_capacity(drive);
}

@@ -980,12 +919,12 @@ static ide_driver_t idedisk_driver = {
.shutdown = ide_device_shutdown,
.version = IDEDISK_VERSION,
.media = ide_disk,
- .supports_dsc_overlap = 0,
.do_request = ide_do_rw_disk,
.end_request = ide_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idedisk_proc,
+ .settings = idedisk_settings,
#endif
};

@@ -994,7 +933,7 @@ static int idedisk_set_doorlock(ide_drive_t *drive, int on)
ide_task_t task;

memset(&task, 0, sizeof(task));
- task.tf.command = on ? WIN_DOORLOCK : WIN_DOORUNLOCK;
+ task.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;

return ide_no_data_taskfile(drive, &task);
@@ -1059,52 +998,28 @@ static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}

+static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
+{ HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address },
+{ HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount },
+{ HDIO_GET_NOWERR, HDIO_SET_NOWERR, &ide_devset_nowerr },
+{ HDIO_GET_WCACHE, HDIO_SET_WCACHE, &ide_devset_wcache },
+{ HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, &ide_devset_acoustic },
+{ 0 }
+};
+
static int idedisk_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- unsigned long flags;
struct block_device *bdev = inode->i_bdev;
struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
ide_drive_t *drive = idkp->drive;
- int err, (*setfunc)(ide_drive_t *, int);
- u8 *val;
-
- switch (cmd) {
- case HDIO_GET_ADDRESS: val = &drive->addressing; goto read_val;
- case HDIO_GET_MULTCOUNT: val = &drive->mult_count; goto read_val;
- case HDIO_GET_NOWERR: val = &drive->nowerr; goto read_val;
- case HDIO_GET_WCACHE: val = &drive->wcache; goto read_val;
- case HDIO_GET_ACOUSTIC: val = &drive->acoustic; goto read_val;
- case HDIO_SET_ADDRESS: setfunc = set_lba_addressing; goto set_val;
- case HDIO_SET_MULTCOUNT: setfunc = set_multcount; goto set_val;
- case HDIO_SET_NOWERR: setfunc = set_nowerr; goto set_val;
- case HDIO_SET_WCACHE: setfunc = write_cache; goto set_val;
- case HDIO_SET_ACOUSTIC: setfunc = set_acoustic; goto set_val;
- }
+ int err;

- return generic_ide_ioctl(drive, file, bdev, cmd, arg);
+ err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
+ if (err != -EOPNOTSUPP)
+ return err;

-read_val:
- mutex_lock(&ide_setting_mtx);
- spin_lock_irqsave(&ide_lock, flags);
- err = *val;
- spin_unlock_irqrestore(&ide_lock, flags);
- mutex_unlock(&ide_setting_mtx);
- return err >= 0 ? put_user(err, (long __user *)arg) : err;
-
-set_val:
- if (bdev != bdev->bd_contains)
- err = -EINVAL;
- else {
- if (!capable(CAP_SYS_ADMIN))
- err = -EACCES;
- else {
- mutex_lock(&ide_setting_mtx);
- err = setfunc(drive, arg);
- mutex_unlock(&ide_setting_mtx);
- }
- }
- return err;
+ return generic_ide_ioctl(drive, file, bdev, cmd, arg);
}

static int idedisk_media_changed(struct gendisk *disk)
@@ -1148,8 +1063,7 @@ static int ide_disk_probe(ide_drive_t *drive)
/* strstr("foo", "") is non-NULL */
if (!strstr("ide-disk", drive->driver_req))
goto failed;
- if (!drive->present)
- goto failed;
+
if (drive->media != ide_disk)
goto failed;

@@ -1163,8 +1077,6 @@ static int ide_disk_probe(ide_drive_t *drive)

ide_init_disk(g, drive);

- ide_proc_register_driver(drive, &idedisk_driver);
-
kref_init(&idkp->kref);

idkp->drive = drive;
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 3fa07c0..ef2f150 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -106,7 +106,7 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)
dma_stat = hwif->dma_ops->dma_end(drive);
stat = hwif->tp_ops->read_status(hwif);

- if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
+ if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) {
if (!dma_stat) {
struct request *rq = HWGROUP(drive)->rq;

@@ -288,7 +288,7 @@ EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
static int config_drive_for_dma (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;

if (drive->media != ide_disk) {
if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
@@ -299,16 +299,17 @@ static int config_drive_for_dma (ide_drive_t *drive)
* Enable DMA on any drive that has
* UltraDMA (mode 0/1/2/3/4/5/6) enabled
*/
- if ((id->field_valid & 4) && ((id->dma_ultra >> 8) & 0x7f))
+ if ((id[ATA_ID_FIELD_VALID] & 4) &&
+ ((id[ATA_ID_UDMA_MODES] >> 8) & 0x7f))
return 1;

/*
* Enable DMA on any drive that has mode2 DMA
* (multi or single) enabled
*/
- if (id->field_valid & 2) /* regular DMA */
- if ((id->dma_mword & 0x404) == 0x404 ||
- (id->dma_1word & 0x404) == 0x404)
+ if (id[ATA_ID_FIELD_VALID] & 2) /* regular DMA */
+ if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 ||
+ (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404)
return 1;

/* Consult the list of known "good" drives */
@@ -591,12 +592,12 @@ static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }

int __ide_dma_bad_drive (ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;

int blacklist = ide_in_drive_list(id, drive_blacklist);
if (blacklist) {
printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n",
- drive->name, id->model);
+ drive->name, (char *)&id[ATA_ID_PROD]);
return blacklist;
}
return 0;
@@ -612,21 +613,21 @@ static const u8 xfer_mode_bases[] = {

static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
unsigned int mask = 0;

switch(base) {
case XFER_UDMA_0:
- if ((id->field_valid & 4) == 0)
+ if ((id[ATA_ID_FIELD_VALID] & 4) == 0)
break;

if (port_ops && port_ops->udma_filter)
mask = port_ops->udma_filter(drive);
else
mask = hwif->ultra_mask;
- mask &= id->dma_ultra;
+ mask &= id[ATA_ID_UDMA_MODES];

/*
* avoid false cable warning from eighty_ninty_three()
@@ -637,19 +638,19 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
}
break;
case XFER_MW_DMA_0:
- if ((id->field_valid & 2) == 0)
+ if ((id[ATA_ID_FIELD_VALID] & 2) == 0)
break;
if (port_ops && port_ops->mdma_filter)
mask = port_ops->mdma_filter(drive);
else
mask = hwif->mwdma_mask;
- mask &= id->dma_mword;
+ mask &= id[ATA_ID_MWDMA_MODES];
break;
case XFER_SW_DMA_0:
- if (id->field_valid & 2) {
- mask = id->dma_1word & hwif->swdma_mask;
- } else if (id->tDMA) {
- u8 mode = id->tDMA;
+ if (id[ATA_ID_FIELD_VALID] & 2) {
+ mask = id[ATA_ID_SWDMA_MODES] & hwif->swdma_mask;
+ } else if (id[ATA_ID_OLD_DMA_MODES] >> 8) {
+ u8 mode = id[ATA_ID_OLD_DMA_MODES] >> 8;

/*
* if the mode is valid convert it to the mask
@@ -706,7 +707,8 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
/*
* is this correct?
*/
- if (ide_dma_good_drive(drive) && drive->id->eide_dma_time < 150)
+ if (ide_dma_good_drive(drive) &&
+ drive->id[ATA_ID_EIDE_DMA_TIME] < 150)
mode = XFER_MW_DMA_1;
}

@@ -725,7 +727,7 @@ static int ide_tune_dma(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
u8 speed;

- if (drive->nodma || (drive->id->capability & 1) == 0)
+ if (drive->nodma || ata_id_has_dma(drive->id) == 0)
return 0;

/* consult the list of known "bad" drives */
@@ -767,13 +769,15 @@ static int ide_dma_check(ide_drive_t *drive)

int ide_id_dma_bug(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;

- if (id->field_valid & 4) {
- if ((id->dma_ultra >> 8) && (id->dma_mword >> 8))
+ if (id[ATA_ID_FIELD_VALID] & 4) {
+ if ((id[ATA_ID_UDMA_MODES] >> 8) &&
+ (id[ATA_ID_MWDMA_MODES] >> 8))
goto err_out;
- } else if (id->field_valid & 2) {
- if ((id->dma_mword >> 8) && (id->dma_1word >> 8))
+ } else if (id[ATA_ID_FIELD_VALID] & 2) {
+ if ((id[ATA_ID_MWDMA_MODES] >> 8) &&
+ (id[ATA_ID_SWDMA_MODES] >> 8))
goto err_out;
}
return 0;
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index e9034c0..d36f155 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -15,6 +15,8 @@
* Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/

+#define DRV_NAME "ide-floppy"
+
#define IDEFLOPPY_VERSION "1.00"

#include
@@ -31,8 +33,10 @@
#include
#include
#include
+#include
#include
#include
+#include

#include

@@ -42,6 +46,8 @@
#include
#include

+#include "ide-floppy.h"
+
/* define to see debug info */
#define IDEFLOPPY_DEBUG_LOG 0

@@ -55,102 +61,23 @@
#define debug_log(fmt, args...) do {} while (0)
#endif

-
-/* Some drives require a longer irq timeout. */
-#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
-
/*
* After each failed packet command we issue a request sense command and retry
* the packet command IDEFLOPPY_MAX_PC_RETRIES times.
*/
#define IDEFLOPPY_MAX_PC_RETRIES 3

-/*
- * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE
- * bytes.
- */
-#define IDEFLOPPY_PC_BUFFER_SIZE 256
-
-/*
- * In various places in the driver, we need to allocate storage for packet
- * commands and requests, which will remain valid while we leave the driver to
- * wait for an interrupt or a timeout event.
- */
-#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
-
/* format capacities descriptor codes */
#define CAPACITY_INVALID 0x00
#define CAPACITY_UNFORMATTED 0x01
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03

-/*
- * Most of our global data which we need to save even as we leave the driver
- * due to an interrupt or a timer event is stored in a variable of type
- * idefloppy_floppy_t, defined below.
- */
-typedef struct ide_floppy_obj {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
- unsigned int openers; /* protected by BKL for now */
-
- /* Current packet command */
- struct ide_atapi_pc *pc;
- /* Last failed packet command */
- struct ide_atapi_pc *failed_pc;
- /* Packet command stack */
- struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK];
- /* Next free packet command storage space */
- int pc_stack_index;
- struct request rq_stack[IDEFLOPPY_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
-
- /* Last error information */
- u8 sense_key, asc, ascq;
- /* delay this long before sending packet command */
- u8 ticks;
- int progress_indication;
-
- /* Device information */
- /* Current format */
- int blocks, block_size, bs_factor;
- /* Last format capacity descriptor */
- u8 cap_desc[8];
- /* Copy of the flexible disk page */
- u8 flexible_disk_page[32];
- /* Write protect */
- int wp;
- /* Supports format progress report */
- int srfp;
-} idefloppy_floppy_t;
-
#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */

-/* Defines for the MODE SENSE command */
-#define MODE_SENSE_CURRENT 0x00
-#define MODE_SENSE_CHANGEABLE 0x01
-#define MODE_SENSE_DEFAULT 0x02
-#define MODE_SENSE_SAVED 0x03
-
-/* IOCTLs used in low-level formatting. */
-#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
-#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
-#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
-#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
-
/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101

-/*
- * Pages of the SELECT SENSE / MODE SENSE packet commands.
- * See SFF-8070i spec.
- */
-#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
-#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
-
static DEFINE_MUTEX(idefloppy_ref_mutex);

#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
@@ -219,44 +146,6 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
return 0;
}

-static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount, int direction)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = pc->rq;
- struct req_iterator iter;
- struct bio_vec *bvec;
- unsigned long flags;
- int count, done = 0;
- char *data;
-
- rq_for_each_segment(bvec, rq, iter) {
- if (!bcount)
- break;
-
- count = min(bvec->bv_len, bcount);
-
- data = bvec_kmap_irq(bvec, &flags);
- if (direction)
- hwif->tp_ops->output_data(drive, NULL, data, count);
- else
- hwif->tp_ops->input_data(drive, NULL, data, count);
- bvec_kunmap_irq(data, &flags);
-
- bcount -= count;
- pc->b_count += count;
- done += count;
- }
-
- idefloppy_end_request(drive, 1, done >> 9);
-
- if (bcount) {
- printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
- drive->name, __func__, bcount);
- ide_pad_transfer(drive, direction, bcount);
- }
-}
-
static void idefloppy_update_buffers(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
@@ -267,43 +156,6 @@ static void idefloppy_update_buffers(ide_drive_t *drive,
idefloppy_end_request(drive, 1, 0);
}

-/*
- * Generate a new packet command request in front of the request queue, before
- * the current request so that it will be processed immediately, on the next
- * pass through the driver.
- */
-static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
- struct request *rq)
-{
- struct ide_floppy_obj *floppy = drive->driver_data;
-
- blk_rq_init(NULL, rq);
- rq->buffer = (char *) pc;
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd_flags |= REQ_PREEMPT;
- rq->rq_disk = floppy->disk;
- memcpy(rq->cmd, pc->c, 12);
- ide_do_drive_cmd(drive, rq);
-}
-
-static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
- floppy->pc_stack_index = 0;
- return (&floppy->pc_stack[floppy->pc_stack_index++]);
-}
-
-static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK)
- floppy->rq_stack_index = 0;
- return (&floppy->rq_stack[floppy->rq_stack_index++]);
-}
-
static void ide_floppy_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -341,16 +193,9 @@ static void ide_floppy_callback(ide_drive_t *drive)
idefloppy_end_request(drive, uptodate, 0);
}

-static void idefloppy_init_pc(struct ide_atapi_pc *pc)
-{
- memset(pc, 0, sizeof(*pc));
- pc->buf = pc->pc_buf;
- pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
-}
-
-static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
+void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
{
- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = GPCMD_REQUEST_SENSE;
pc->c[4] = 255;
pc->req_xfer = 18;
@@ -362,14 +207,13 @@ static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
*/
static void idefloppy_retry_pc(ide_drive_t *drive)
{
- struct ide_atapi_pc *pc;
- struct request *rq;
+ struct ide_floppy_obj *floppy = drive->driver_data;
+ struct request *rq = &floppy->request_sense_rq;
+ struct ide_atapi_pc *pc = &floppy->request_sense_pc;

(void)ide_read_error(drive);
- pc = idefloppy_next_pc_storage(drive);
- rq = idefloppy_next_rq_storage(drive);
- idefloppy_create_request_sense_cmd(pc);
- idefloppy_queue_pc_head(drive, pc, rq);
+ ide_floppy_create_request_sense_cmd(pc);
+ ide_queue_pc_head(drive, floppy->disk, pc, rq);
}

/* The usual interrupt handler called during a packet command. */
@@ -378,8 +222,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
idefloppy_floppy_t *floppy = drive->driver_data;

return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
- IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers,
- idefloppy_retry_pc, NULL, ide_floppy_io_buffers);
+ WAIT_FLOPPY_CMD, NULL, idefloppy_update_buffers,
+ idefloppy_retry_pc, NULL, ide_io_buffers);
}

/*
@@ -396,10 +240,9 @@ static int idefloppy_transfer_pc(ide_drive_t *drive)
drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12);

/* Timeout for the packet command */
- return IDEFLOPPY_WAIT_CMD;
+ return WAIT_FLOPPY_CMD;
}

-
/*
* Called as an interrupt (or directly). When the device says it's ready for a
* packet, we schedule the packet transfer to occur about 2-3 ticks later in
@@ -424,7 +267,7 @@ static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
timeout = floppy->ticks;
expiry = &idefloppy_transfer_pc;
} else {
- timeout = IDEFLOPPY_WAIT_CMD;
+ timeout = WAIT_FLOPPY_CMD;
expiry = NULL;
}

@@ -474,58 +317,27 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;

return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
- IDEFLOPPY_WAIT_CMD, NULL);
-}
-
-static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
-{
- debug_log("creating prevent removal command, prevent = %d\n", prevent);
-
- idefloppy_init_pc(pc);
- pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
- pc->c[4] = prevent;
+ WAIT_FLOPPY_CMD, NULL);
}

-static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
+void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
{
- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
pc->c[7] = 255;
pc->c[8] = 255;
pc->req_xfer = 255;
}

-static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
- int l, int flags)
-{
- idefloppy_init_pc(pc);
- pc->c[0] = GPCMD_FORMAT_UNIT;
- pc->c[1] = 0x17;
-
- memset(pc->buf, 0, 12);
- pc->buf[1] = 0xA2;
- /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
-
- if (flags & 1) /* Verify bit on... */
- pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
- pc->buf[3] = 8;
-
- put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
- put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
- pc->buf_size = 12;
- pc->flags |= PC_FLAG_WRITING;
-}
-
/* A mode sense command is used to "sense" floppy parameters. */
-static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc,
- u8 page_code, u8 type)
+void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */

- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = GPCMD_MODE_SENSE_10;
pc->c[1] = 0;
- pc->c[2] = page_code + (type << 6);
+ pc->c[2] = page_code;

switch (page_code) {
case IDEFLOPPY_CAPABILITIES_PAGE:
@@ -542,13 +354,6 @@ static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc,
pc->req_xfer = length;
}

-static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start)
-{
- idefloppy_init_pc(pc);
- pc->c[0] = GPCMD_START_STOP_UNIT;
- pc->c[4] = start;
-}
-
static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
@@ -560,7 +365,7 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
block, blocks);

- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
@@ -568,7 +373,7 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
memcpy(rq->cmd, pc->c, 12);

pc->rq = rq;
- pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
+ pc->b_count = 0;
if (rq->cmd_flags & REQ_RW)
pc->flags |= PC_FLAG_WRITING;
pc->buf = NULL;
@@ -579,10 +384,10 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc, struct request *rq)
{
- idefloppy_init_pc(pc);
+ ide_init_pc(pc);
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
- pc->b_count = rq->data_len;
+ pc->b_count = 0;
if (rq->data_len && rq_data_dir(rq) == WRITE)
pc->flags |= PC_FLAG_WRITING;
pc->buf = rq->data;
@@ -599,15 +404,17 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
struct request *rq, sector_t block_s)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ ide_hwif_t *hwif = drive->hwif;
struct ide_atapi_pc *pc;
unsigned long block = (unsigned long)block_s;

- debug_log("dev: %s, cmd_type: %x, errors: %d\n",
- rq->rq_disk ? rq->rq_disk->disk_name : "?",
- rq->cmd_type, rq->errors);
- debug_log("sector: %ld, nr_sectors: %ld, "
- "current_nr_sectors: %d\n", (long)rq->sector,
- rq->nr_sectors, rq->current_nr_sectors);
+ debug_log("%s: dev: %s, cmd: 0x%x, cmd_type: %x, errors: %d\n",
+ __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?",
+ rq->cmd[0], rq->cmd_type, rq->errors);
+
+ debug_log("%s: sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",
+ __func__, (long)rq->sector, rq->nr_sectors,
+ rq->current_nr_sectors);

if (rq->errors >= ERROR_MAX) {
if (floppy->failed_pc)
@@ -626,12 +433,12 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
- pc = idefloppy_next_pc_storage(drive);
+ pc = &floppy->queued_pc;
idefloppy_create_rw_cmd(floppy, pc, rq, block);
} else if (blk_special_request(rq)) {
pc = (struct ide_atapi_pc *) rq->buffer;
} else if (blk_pc_request(rq)) {
- pc = idefloppy_next_pc_storage(drive);
+ pc = &floppy->queued_pc;
idefloppy_blockpc_cmd(floppy, pc, rq);
} else {
blk_dump_rq_flags(rq,
@@ -640,29 +447,15 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
return ide_stopped;
}

- pc->rq = rq;
+ ide_init_sg_cmd(drive, rq);
+ ide_map_sg(drive, rq);

- return idefloppy_issue_pc(drive, pc);
-}
+ pc->sg = hwif->sg_table;
+ pc->sg_cnt = hwif->sg_nents;

-/*
- * Add a special packet command request to the tail of the request queue,
- * and wait for it to be serviced.
- */
-static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- struct ide_floppy_obj *floppy = drive->driver_data;
- struct request *rq;
- int error;
-
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->buffer = (char *) pc;
- rq->cmd_type = REQ_TYPE_SPECIAL;
- memcpy(rq->cmd, pc->c, 12);
- error = blk_execute_rq(drive->queue, floppy->disk, rq, 0);
- blk_put_request(rq);
+ pc->rq = rq;

- return error;
+ return idefloppy_issue_pc(drive, pc);
}

/*
@@ -672,22 +465,28 @@ static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ struct gendisk *disk = floppy->disk;
struct ide_atapi_pc pc;
u8 *page;
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
u8 heads, sectors;

- idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE,
- MODE_SENSE_CURRENT);
+ ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);

- if (idefloppy_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, disk, &pc)) {
printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
" parameters\n");
return 1;
}
- floppy->wp = !!(pc.buf[3] & 0x80);
- set_disk_ro(floppy->disk, floppy->wp);
+
+ if (pc.buf[3] & 0x80)
+ drive->atapi_flags |= IDE_AFLAG_WP;
+ else
+ drive->atapi_flags &= ~IDE_AFLAG_WP;
+
+ set_disk_ro(disk, !!(drive->atapi_flags & IDE_AFLAG_WP));
+
page = &pc.buf[8];

transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]);
@@ -721,23 +520,6 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
return 0;
}

-static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
-
- floppy->srfp = 0;
- idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
- MODE_SENSE_CURRENT);
-
- pc.flags |= PC_FLAG_SUPPRESS_ERROR;
- if (idefloppy_queue_pc_tail(drive, &pc))
- return 1;
-
- floppy->srfp = pc.buf[8 + 2] & 0x40;
- return (0);
-}
-
/*
* Determine if a media is present in the floppy drive, and if so, its LBA
* capacity.
@@ -745,6 +527,7 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
static int ide_floppy_get_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ struct gendisk *disk = floppy->disk;
struct ide_atapi_pc pc;
u8 *cap_desc;
u8 header_len, desc_cnt;
@@ -756,8 +539,8 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
floppy->bs_factor = 1;
set_capacity(floppy->disk, 0);

- idefloppy_create_read_capacity_cmd(&pc);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
+ ide_floppy_create_read_capacity_cmd(&pc);
+ if (ide_queue_pc_tail(drive, disk, &pc)) {
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return 1;
}
@@ -832,202 +615,55 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
(void) ide_floppy_get_flexible_disk_page(drive);

- set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
+ set_capacity(disk, floppy->blocks * floppy->bs_factor);
+
return rc;
}

-/*
- * Obtain the list of formattable capacities.
- * Very similar to ide_floppy_get_capacity, except that we push the capacity
- * descriptors to userland, instead of our own structures.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_capacities {
- * int nformats;
- * struct {
- * int nblocks;
- * int blocksize;
- * } formats[];
- * };
- *
- * userland initializes nformats to the number of allocated formats[] records.
- * On exit we set nformats to the number of records we've actually initialized.
- */
-
-static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+static sector_t idefloppy_capacity(ide_drive_t *drive)
{
- struct ide_atapi_pc pc;
- u8 header_len, desc_cnt;
- int i, blocks, length, u_array_size, u_index;
- int __user *argp;
-
- if (get_user(u_array_size, arg))
- return (-EFAULT);
-
- if (u_array_size <= 0)
- return (-EINVAL);
-
- idefloppy_create_read_capacity_cmd(&pc);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
- return (-EIO);
- }
- header_len = pc.buf[3];
- desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
-
- u_index = 0;
- argp = arg + 1;
-
- /*
- * We always skip the first capacity descriptor. That's the current
- * capacity. We are interested in the remaining descriptors, the
- * formattable capacities.
- */
- for (i = 1; i < desc_cnt; i++) {
- unsigned int desc_start = 4 + i*8;
-
- if (u_index >= u_array_size)
- break; /* User-supplied buffer too small */
-
- blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
-
- if (put_user(blocks, argp))
- return(-EFAULT);
- ++argp;
-
- if (put_user(length, argp))
- return (-EFAULT);
- ++argp;
-
- ++u_index;
- }
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ unsigned long capacity = floppy->blocks * floppy->bs_factor;

- if (put_user(u_index, arg))
- return (-EFAULT);
- return (0);
+ return capacity;
}

-/*
- * Get ATAPI_FORMAT_UNIT progress indication.
- *
- * Userland gives a pointer to an int. The int is set to a progress
- * indicator 0-65536, with 65536=100%.
- *
- * If the drive does not support format progress indication, we just check
- * the dsc bit, and return either 0 or 65536.
- */
+#ifdef CONFIG_IDE_PROC_FS
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);

-static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
+static int get_ticks(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
- int progress_indication = 0x10000;
-
- if (floppy->srfp) {
- idefloppy_create_request_sense_cmd(&pc);
- if (idefloppy_queue_pc_tail(drive, &pc))
- return (-EIO);
-
- if (floppy->sense_key == 2 &&
- floppy->asc == 4 &&
- floppy->ascq == 4)
- progress_indication = floppy->progress_indication;
-
- /* Else assume format_unit has finished, and we're at 0x10000 */
- } else {
- ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
- u8 stat;
-
- local_irq_save(flags);
- stat = hwif->tp_ops->read_status(hwif);
- local_irq_restore(flags);
-
- progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
- }
- if (put_user(progress_indication, arg))
- return (-EFAULT);
-
- return (0);
+ return floppy->ticks;
}

-static sector_t idefloppy_capacity(ide_drive_t *drive)
+static int set_ticks(ide_drive_t *drive, int arg)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- unsigned long capacity = floppy->blocks * floppy->bs_factor;
-
- return capacity;
-}
-
-/*
- * Check whether we can support a drive, based on the ATAPI IDENTIFY command
- * results.
- */
-static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
-{
- u8 gcw[2];
- u8 device_type, protocol, removable, drq_type, packet_size;
-
- *((u16 *) &gcw) = id->config;
-
- device_type = gcw[1] & 0x1F;
- removable = (gcw[0] & 0x80) >> 7;
- protocol = (gcw[1] & 0xC0) >> 6;
- drq_type = (gcw[0] & 0x60) >> 5;
- packet_size = gcw[0] & 0x03;
-
-#ifdef CONFIG_PPC
- /* kludge for Apple PowerBook internal zip */
- if (device_type == 5 &&
- !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP"))
- device_type = 0;
-#endif
-
- if (protocol != 2)
- printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
- protocol);
- else if (device_type != 0)
- printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
- "to floppy\n", device_type);
- else if (!removable)
- printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
- else if (drq_type == 3)
- printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
- "supported\n", drq_type);
- else if (packet_size != 0)
- printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
- "bytes\n", packet_size);
- else
- return 1;
+ floppy->ticks = arg;
return 0;
}

-#ifdef CONFIG_IDE_PROC_FS
-static void idefloppy_add_settings(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
+IDE_DEVSET(ticks, DS_SYNC, get_ticks, set_ticks);

- ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1,
- &drive->bios_cyl, NULL);
- ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
- &drive->bios_head, NULL);
- ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1,
- &drive->bios_sect, NULL);
- ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
- &floppy->ticks, NULL);
-}
-#else
-static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
+static const struct ide_proc_devset idefloppy_settings[] = {
+ IDE_PROC_DEVSET(bios_cyl, 0, 1023),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(ticks, 0, 255),
+ { 0 },
+};
#endif

static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
+ u16 *id = drive->id;
u8 gcw[2];

- *((u16 *) &gcw) = drive->id->config;
- floppy->pc = floppy->pc_stack;
+ *((u16 *)&gcw) = id[ATA_ID_CONFIG];
+
drive->pc_callback = ide_floppy_callback;

if (((gcw[0] & 0x60) >> 5) == 1)
@@ -1041,7 +677,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
* it. It should be fixed as of version 1.9, but to be on the safe side
* we'll leave the limitation below for the 2.2.x tree.
*/
- if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
+ if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
floppy->ticks = IDEFLOPPY_TICKS_DELAY;
@@ -1052,13 +688,16 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
* Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
* nasty clicking noises without it, so please don't remove this.
*/
- if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
+ if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
blk_queue_max_sectors(drive->queue, 64);
drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
+ /* IOMEGA Clik! drives do not support lock/unlock commands */
+ drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
}

(void) ide_floppy_get_capacity(drive);
- idefloppy_add_settings(drive);
+
+ ide_proc_register_driver(drive, floppy->driver);
}

static void ide_floppy_remove(ide_drive_t *drive)
@@ -1115,12 +754,12 @@ static ide_driver_t idefloppy_driver = {
.remove = ide_floppy_remove,
.version = IDEFLOPPY_VERSION,
.media = ide_floppy,
- .supports_dsc_overlap = 0,
.do_request = idefloppy_do_request,
.end_request = idefloppy_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idefloppy_proc,
+ .settings = idefloppy_settings,
#endif
};

@@ -1129,7 +768,6 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy;
ide_drive_t *drive;
- struct ide_atapi_pc pc;
int ret = 0;

debug_log("Reached %s\n", __func__);
@@ -1146,13 +784,8 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
/* Just in case */

- idefloppy_init_pc(&pc);
- pc.c[0] = GPCMD_TEST_UNIT_READY;
-
- if (idefloppy_queue_pc_tail(drive, &pc)) {
- idefloppy_create_start_stop_cmd(&pc, 1);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
+ if (ide_do_test_unit_ready(drive, disk))
+ ide_do_start_stop(drive, disk, 1);

if (ide_floppy_get_capacity(drive)
&& (filp->f_flags & O_NDELAY) == 0
@@ -1166,16 +799,13 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
goto out_put_floppy;
}

- if (floppy->wp && (filp->f_mode & 2)) {
+ if ((drive->atapi_flags & IDE_AFLAG_WP) && (filp->f_mode & 2)) {
ret = -EROFS;
goto out_put_floppy;
}
+
drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
- /* IOMEGA Clik! drives do not support lock/unlock commands */
- if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
- idefloppy_create_prevent_cmd(&pc, 1);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
+ ide_set_media_lock(drive, disk, 1);
check_disk_change(inode->i_bdev);
} else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) {
ret = -EBUSY;
@@ -1194,17 +824,11 @@ static int idefloppy_release(struct inode *inode, struct file *filp)
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
ide_drive_t *drive = floppy->drive;
- struct ide_atapi_pc pc;

debug_log("Reached %s\n", __func__);

if (floppy->openers == 1) {
- /* IOMEGA Clik! drives do not support lock/unlock commands */
- if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
- idefloppy_create_prevent_cmd(&pc, 0);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
-
+ ide_set_media_lock(drive, disk, 0);
drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
}

@@ -1230,80 +854,20 @@ static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned long arg, unsigned int cmd)
{
idefloppy_floppy_t *floppy = drive->driver_data;
+ struct gendisk *disk = floppy->disk;
+ int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;

if (floppy->openers > 1)
return -EBUSY;

- /* The IOMEGA Clik! Drive doesn't support this command -
- * no room for an eject mechanism */
- if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
- int prevent = arg ? 1 : 0;
-
- if (cmd == CDROMEJECT)
- prevent = 0;
+ ide_set_media_lock(drive, disk, prevent);

- idefloppy_create_prevent_cmd(pc, prevent);
- (void) idefloppy_queue_pc_tail(floppy->drive, pc);
- }
-
- if (cmd == CDROMEJECT) {
- idefloppy_create_start_stop_cmd(pc, 2);
- (void) idefloppy_queue_pc_tail(floppy->drive, pc);
- }
+ if (cmd == CDROMEJECT)
+ ide_do_start_stop(drive, disk, 2);

return 0;
}

-static int ide_floppy_format_unit(idefloppy_floppy_t *floppy,
- int __user *arg)
-{
- struct ide_atapi_pc pc;
- ide_drive_t *drive = floppy->drive;
- int blocks, length, flags, err = 0;
-
- if (floppy->openers > 1) {
- /* Don't format if someone is using the disk */
- drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
- return -EBUSY;
- }
-
- drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS;
-
- /*
- * Send ATAPI_FORMAT_UNIT to the drive.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_command {
- * int nblocks;
- * int blocksize;
- * int flags;
- * } ;
- *
- * flags is a bitmask, currently, the only defined flag is:
- *
- * 0x01 - verify media after format.
- */
- if (get_user(blocks, arg) ||
- get_user(length, arg+1) ||
- get_user(flags, arg+2)) {
- err = -EFAULT;
- goto out;
- }
-
- (void) idefloppy_get_sfrp_bit(drive);
- idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
-
- if (idefloppy_queue_pc_tail(drive, &pc))
- err = -EIO;
-
-out:
- if (err)
- drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
- return err;
-}
-
-
static int idefloppy_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
@@ -1314,23 +878,12 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
void __user *argp = (void __user *)arg;
int err;

- switch (cmd) {
- case CDROMEJECT:
- /* fall through */
- case CDROM_LOCKDOOR:
+ if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
return ide_floppy_lockdoor(drive, &pc, arg, cmd);
- case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
- return 0;
- case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
- return ide_floppy_get_format_capacities(drive, argp);
- case IDEFLOPPY_IOCTL_FORMAT_START:
- if (!(file->f_mode & 2))
- return -EPERM;
-
- return ide_floppy_format_unit(floppy, (int __user *)arg);
- case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
- return idefloppy_get_format_progress(drive, argp);
- }
+
+ err = ide_floppy_format_ioctl(drive, file, cmd, argp);
+ if (err != -ENOTTY)
+ return err;

/*
* skip SCSI_IOCTL_SEND_COMMAND (deprecated)
@@ -1339,8 +892,6 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
bdev->bd_disk, cmd, argp);
- else
- err = -ENOTTY;

if (err == -ENOTTY)
err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
@@ -1388,11 +939,11 @@ static int ide_floppy_probe(ide_drive_t *drive)

if (!strstr("ide-floppy", drive->driver_req))
goto failed;
- if (!drive->present)
- goto failed;
+
if (drive->media != ide_floppy)
goto failed;
- if (!idefloppy_identify_device(drive, drive->id)) {
+
+ if (!ide_check_atapi_device(drive, DRV_NAME)) {
printk(KERN_ERR "ide-floppy: %s: not supported by this version"
" of ide-floppy\n", drive->name);
goto failed;
@@ -1410,8 +961,6 @@ static int ide_floppy_probe(ide_drive_t *drive)

ide_init_disk(g, drive);

- ide_proc_register_driver(drive, &idefloppy_driver);
-
kref_init(&floppy->kref);

floppy->drive = drive;
@@ -1450,6 +999,7 @@ static int __init idefloppy_init(void)
}

MODULE_ALIAS("ide:*m-floppy*");
+MODULE_ALIAS("ide-floppy");
module_init(idefloppy_init);
module_exit(idefloppy_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h
new file mode 100644
index 0000000..ecadc2b
--- /dev/null
+++ b/drivers/ide/ide-floppy.h
@@ -0,0 +1,63 @@
+#ifndef __IDE_FLOPPY_H
+#define __IDE_FLOPPY_H
+
+/*
+ * Most of our global data which we need to save even as we leave the driver
+ * due to an interrupt or a timer event is stored in a variable of type
+ * idefloppy_floppy_t, defined below.
+ */
+typedef struct ide_floppy_obj {
+ ide_drive_t *drive;
+ ide_driver_t *driver;
+ struct gendisk *disk;
+ struct kref kref;
+ unsigned int openers; /* protected by BKL for now */
+
+ /* Current packet command */
+ struct ide_atapi_pc *pc;
+ /* Last failed packet command */
+ struct ide_atapi_pc *failed_pc;
+ /* used for blk_{fs,pc}_request() requests */
+ struct ide_atapi_pc queued_pc;
+
+ struct ide_atapi_pc request_sense_pc;
+ struct request request_sense_rq;
+
+ /* Last error information */
+ u8 sense_key, asc, ascq;
+ /* delay this long before sending packet command */
+ u8 ticks;
+ int progress_indication;
+
+ /* Device information */
+ /* Current format */
+ int blocks, block_size, bs_factor;
+ /* Last format capacity descriptor */
+ u8 cap_desc[8];
+ /* Copy of the flexible disk page */
+ u8 flexible_disk_page[32];
+} idefloppy_floppy_t;
+
+/*
+ * Pages of the SELECT SENSE / MODE SENSE packet commands.
+ * See SFF-8070i spec.
+ */
+#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
+#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
+
+/* IOCTLs used in low-level formatting. */
+#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
+#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
+#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
+#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
+
+/* ide-floppy.c */
+void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8);
+void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
+void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *);
+
+/* ide-floppy_ioctl.c */
+int ide_floppy_format_ioctl(ide_drive_t *, struct file *, unsigned int,
+ void __user *);
+
+#endif /*__IDE_FLOPPY_H */
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
new file mode 100644
index 0000000..5ffc451
--- /dev/null
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -0,0 +1,243 @@
+/*
+ * ide-floppy IOCTLs handling.
+ */
+
+#include
+#include
+#include
+
+#include
+
+#include
+
+#include "ide-floppy.h"
+
+/*
+ * Obtain the list of formattable capacities.
+ * Very similar to ide_floppy_get_capacity, except that we push the capacity
+ * descriptors to userland, instead of our own structures.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_capacities {
+ * int nformats;
+ * struct {
+ * int nblocks;
+ * int blocksize;
+ * } formats[];
+ * };
+ *
+ * userland initializes nformats to the number of allocated formats[] records.
+ * On exit we set nformats to the number of records we've actually initialized.
+ */
+
+static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+{
+ struct ide_floppy_obj *floppy = drive->driver_data;
+ struct ide_atapi_pc pc;
+ u8 header_len, desc_cnt;
+ int i, blocks, length, u_array_size, u_index;
+ int __user *argp;
+
+ if (get_user(u_array_size, arg))
+ return -EFAULT;
+
+ if (u_array_size <= 0)
+ return -EINVAL;
+
+ ide_floppy_create_read_capacity_cmd(&pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, &pc)) {
+ printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
+ return -EIO;
+ }
+
+ header_len = pc.buf[3];
+ desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
+
+ u_index = 0;
+ argp = arg + 1;
+
+ /*
+ * We always skip the first capacity descriptor. That's the current
+ * capacity. We are interested in the remaining descriptors, the
+ * formattable capacities.
+ */
+ for (i = 1; i < desc_cnt; i++) {
+ unsigned int desc_start = 4 + i*8;
+
+ if (u_index >= u_array_size)
+ break; /* User-supplied buffer too small */
+
+ blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
+ length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+
+ if (put_user(blocks, argp))
+ return -EFAULT;
+
+ ++argp;
+
+ if (put_user(length, argp))
+ return -EFAULT;
+
+ ++argp;
+
+ ++u_index;
+ }
+
+ if (put_user(u_index, arg))
+ return -EFAULT;
+
+ return 0;
+}
+
+static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
+ int l, int flags)
+{
+ ide_init_pc(pc);
+ pc->c[0] = GPCMD_FORMAT_UNIT;
+ pc->c[1] = 0x17;
+
+ memset(pc->buf, 0, 12);
+ pc->buf[1] = 0xA2;
+ /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
+
+ if (flags & 1) /* Verify bit on... */
+ pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
+ pc->buf[3] = 8;
+
+ put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
+ put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
+ pc->buf_size = 12;
+ pc->flags |= PC_FLAG_WRITING;
+}
+
+static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
+{
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_atapi_pc pc;
+
+ drive->atapi_flags &= ~IDE_AFLAG_SRFP;
+
+ ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE);
+ pc.flags |= PC_FLAG_SUPPRESS_ERROR;
+
+ if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ return 1;
+
+ if (pc.buf[8 + 2] & 0x40)
+ drive->atapi_flags |= IDE_AFLAG_SRFP;
+
+ return 0;
+}
+
+static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
+{
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_atapi_pc pc;
+ int blocks, length, flags, err = 0;
+
+ if (floppy->openers > 1) {
+ /* Don't format if someone is using the disk */
+ drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
+ return -EBUSY;
+ }
+
+ drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS;
+
+ /*
+ * Send ATAPI_FORMAT_UNIT to the drive.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_command {
+ * int nblocks;
+ * int blocksize;
+ * int flags;
+ * } ;
+ *
+ * flags is a bitmask, currently, the only defined flag is:
+ *
+ * 0x01 - verify media after format.
+ */
+ if (get_user(blocks, arg) ||
+ get_user(length, arg+1) ||
+ get_user(flags, arg+2)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ (void)ide_floppy_get_sfrp_bit(drive);
+ ide_floppy_create_format_unit_cmd(&pc, blocks, length, flags);
+
+ if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ err = -EIO;
+
+out:
+ if (err)
+ drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
+ return err;
+}
+
+/*
+ * Get ATAPI_FORMAT_UNIT progress indication.
+ *
+ * Userland gives a pointer to an int. The int is set to a progress
+ * indicator 0-65536, with 65536=100%.
+ *
+ * If the drive does not support format progress indication, we just check
+ * the dsc bit, and return either 0 or 65536.
+ */
+
+static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
+{
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_atapi_pc pc;
+ int progress_indication = 0x10000;
+
+ if (drive->atapi_flags & IDE_AFLAG_SRFP) {
+ ide_floppy_create_request_sense_cmd(&pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ return -EIO;
+
+ if (floppy->sense_key == 2 &&
+ floppy->asc == 4 &&
+ floppy->ascq == 4)
+ progress_indication = floppy->progress_indication;
+
+ /* Else assume format_unit has finished, and we're at 0x10000 */
+ } else {
+ ide_hwif_t *hwif = drive->hwif;
+ unsigned long flags;
+ u8 stat;
+
+ local_irq_save(flags);
+ stat = hwif->tp_ops->read_status(hwif);
+ local_irq_restore(flags);
+
+ progress_indication = ((stat & ATA_DSC) == 0) ? 0 : 0x10000;
+ }
+
+ if (put_user(progress_indication, arg))
+ return -EFAULT;
+
+ return 0;
+}
+
+int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
+ unsigned int cmd, void __user *argp)
+{
+ switch (cmd) {
+ case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
+ return 0;
+ case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
+ return ide_floppy_get_format_capacities(drive, argp);
+ case IDEFLOPPY_IOCTL_FORMAT_START:
+ if (!(file->f_mode & 2))
+ return -EPERM;
+ return ide_floppy_format_unit(drive, (int __user *)argp);
+ case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
+ return ide_floppy_get_format_progress(drive, argp);
+ default:
+ return -ENOTTY;
+ }
+}
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 8fe8b5b..0a3cb0c 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -19,6 +19,7 @@
#include
#include
#include
+#include

/* FIXME: convert m32r to use ide_platform host driver */
#ifdef CONFIG_M32R
@@ -27,7 +28,7 @@

#define DRV_NAME "ide_generic"

-static int probe_mask = 0x03;
+static int probe_mask;
module_param(probe_mask, int, 0);
MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");

@@ -100,19 +101,65 @@ static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
static const int legacy_irqs[] = { 14, 15, 11, 10, 8, 12 };
#endif

+static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary)
+{
+ struct pci_dev *p = NULL;
+ u16 val;
+
+ for_each_pci_dev(p) {
+
+ if (pci_resource_start(p, 0) == 0x1f0)
+ *primary = 1;
+ if (pci_resource_start(p, 2) == 0x170)
+ *secondary = 1;
+
+ /* Cyrix CS55{1,2}0 pre SFF MWDMA ATA on the bridge */
+ if (p->vendor == PCI_VENDOR_ID_CYRIX &&
+ (p->device == PCI_DEVICE_ID_CYRIX_5510 ||
+ p->device == PCI_DEVICE_ID_CYRIX_5520))
+ *primary = *secondary = 1;
+
+ /* Intel MPIIX - PIO ATA on non PCI side of bridge */
+ if (p->vendor == PCI_VENDOR_ID_INTEL &&
+ p->device == PCI_DEVICE_ID_INTEL_82371MX) {
+
+ pci_read_config_word(p, 0x6C, &val);
+ if (val & 0x8000) {
+ /* ATA port enabled */
+ if (val & 0x4000)
+ *secondary = 1;
+ else
+ *primary = 1;
+ }
+ }
+ }
+}
+
static int __init ide_generic_init(void)
{
hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS];
struct ide_host *host;
unsigned long io_addr;
- int i, rc;
+ int i, rc, primary = 0, secondary = 0;

#ifdef CONFIG_MIPS
if (!ide_probe_legacy())
return -ENODEV;
#endif
- printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
- "parameter for probing all legacy ISA IDE ports\n");
+ ide_generic_check_pci_legacy_iobases(&primary, &secondary);
+
+ if (!probe_mask) {
+ printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" "
+ "module parameter for probing all legacy ISA IDE ports\n");
+
+ if (primary == 0)
+ probe_mask |= 0x1;
+
+ if (secondary == 0)
+ probe_mask |= 0x2;
+ } else
+ printk(KERN_INFO DRV_NAME ": enforcing probing of I/O ports "
+ "upon user request\n");

memset(hws, 0, sizeof(hw_regs_t *) * MAX_HWIFS);

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index a896a28..1c51949 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -40,6 +40,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -183,18 +184,18 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
if (drive->media != ide_disk)
break;
/* Not supported? Switch to next step now. */
- if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) {
+ if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0) {
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
}
- if (ide_id_has_flush_cache_ext(drive->id))
- args->tf.command = WIN_FLUSH_CACHE_EXT;
+ if (ata_id_flush_ext_enabled(drive->id))
+ args->tf.command = ATA_CMD_FLUSH_EXT;
else
- args->tf.command = WIN_FLUSH_CACHE;
+ args->tf.command = ATA_CMD_FLUSH;
goto out_do_tf;

case idedisk_pm_standby: /* Suspend step 2 (standby) */
- args->tf.command = WIN_STANDBYNOW1;
+ args->tf.command = ATA_CMD_STANDBYNOW1;
goto out_do_tf;

case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */
@@ -209,7 +210,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
return ide_stopped;

case idedisk_pm_idle: /* Resume step 2 (idle) */
- args->tf.command = WIN_IDLEIMMEDIATE;
+ args->tf.command = ATA_CMD_IDLEIMMEDIATE;
goto out_do_tf;

case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */
@@ -322,7 +323,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
ide_task_t *task = (ide_task_t *)rq->special;

if (rq->errors == 0)
- rq->errors = !OK_STAT(stat, READY_STAT, BAD_STAT);
+ rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT);

if (task) {
struct ide_taskfile *tf = &task->tf;
@@ -373,29 +374,29 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
{
ide_hwif_t *hwif = drive->hwif;

- if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
- } else if (stat & ERR_STAT) {
+ } else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
- if (err == ABRT_ERR) {
+ if (err == ATA_ABORTED) {
if (drive->select.b.lba &&
- /* some newer drives don't support WIN_SPECIFY */
- hwif->tp_ops->read_status(hwif) == WIN_SPECIFY)
+ /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
+ hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
} else if ((err & BAD_CRC) == BAD_CRC) {
/* UDMA crc error, just retry the operation */
drive->crc_count++;
- } else if (err & (BBD_ERR | ECC_ERR)) {
+ } else if (err & (ATA_BBK | ATA_UNC)) {
/* retries won't help these */
rq->errors = ERROR_MAX;
- } else if (err & TRK0_ERR) {
+ } else if (err & ATA_TRK0NF) {
/* help it find track zero */
rq->errors |= ERROR_RECAL;
}
}

- if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ &&
+ if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ &&
(hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
int nsect = drive->mult_count ? drive->mult_count : 1;

@@ -407,7 +408,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
return ide_stopped;
}

- if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
rq->errors |= ERROR_RESET;

if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
@@ -427,16 +428,16 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
{
ide_hwif_t *hwif = drive->hwif;

- if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
/* add decoding error stuff */
}

- if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
/* force an abort */
- hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE);
+ hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);

if (rq->errors >= ERROR_MAX) {
ide_kill_rq(drive, rq);
@@ -509,19 +510,19 @@ static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
tf->lbam = drive->cyl;
tf->lbah = drive->cyl >> 8;
tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
- tf->command = WIN_SPECIFY;
+ tf->command = ATA_CMD_INIT_DEV_PARAMS;
}

static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
tf->nsect = drive->sect;
- tf->command = WIN_RESTORE;
+ tf->command = ATA_CMD_RESTORE;
}

static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
tf->nsect = drive->mult_req;
- tf->command = WIN_SETMULT;
+ tf->command = ATA_CMD_SET_MULTI;
}

static ide_startstop_t ide_disk_special(ide_drive_t *drive)
@@ -540,8 +541,6 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive)
ide_tf_set_restore_cmd(drive, &args.tf);
} else if (s->b.set_multmode) {
s->b.set_multmode = 0;
- if (drive->mult_req > drive->id->max_multsect)
- drive->mult_req = drive->id->max_multsect;
ide_tf_set_setmult_cmd(drive, &args.tf);
} else if (s->all) {
int special = s->all;
@@ -586,9 +585,10 @@ static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
* do_special - issue some special commands
* @drive: drive the command is for
*
- * do_special() is used to issue WIN_SPECIFY, WIN_RESTORE, and WIN_SETMULT
- * commands to a drive. It used to do much more, but has been scaled
- * back.
+ * do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
+ * ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
+ *
+ * It used to do much more, but has been scaled back.
*/

static ide_startstop_t do_special (ide_drive_t *drive)
@@ -716,9 +716,49 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
return ide_stopped;
}

+int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
+ int arg)
+{
+ struct request_queue *q = drive->queue;
+ struct request *rq;
+ int ret = 0;
+
+ if (!(setting->flags & DS_SYNC))
+ return setting->set(drive, arg);
+
+ rq = blk_get_request(q, READ, GFP_KERNEL);
+ if (!rq)
+ return -ENOMEM;
+
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd_len = 5;
+ rq->cmd[0] = REQ_DEVSET_EXEC;
+ *(int *)&rq->cmd[1] = arg;
+ rq->special = setting->set;
+
+ if (blk_execute_rq(q, NULL, rq, 0))
+ ret = rq->errors;
+ blk_put_request(rq);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ide_devset_execute);
+
static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
{
switch (rq->cmd[0]) {
+ case REQ_DEVSET_EXEC:
+ {
+ int err, (*setfunc)(ide_drive_t *, int) = rq->special;
+
+ err = setfunc(drive, *(int *)&rq->cmd[1]);
+ if (err)
+ rq->errors = err;
+ else
+ err = 1;
+ ide_end_request(drive, err, 0);
+ return ide_stopped;
+ }
case REQ_DRIVE_RESET:
return ide_do_reset(drive);
default:
@@ -766,9 +806,7 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
* start_request - start of I/O and command issuing for IDE
*
* start_request() initiates handling of a new I/O request. It
- * accepts commands and I/O (read/write) requests. It also does
- * the final remapping for weird stuff like EZDrive. Once
- * device mapper can work sector level the EZDrive stuff can go away
+ * accepts commands and I/O (read/write) requests.
*
* FIXME: this function needs a rename
*/
@@ -776,7 +814,6 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
{
ide_startstop_t startstop;
- sector_t block;

BUG_ON(!blk_rq_started(rq));

@@ -791,21 +828,12 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
goto kill_rq;
}

- block = rq->sector;
- if (blk_fs_request(rq) &&
- (drive->media == ide_disk || drive->media == ide_floppy)) {
- block += drive->sect0;
- }
- /* Yecch - this will shift the entire interval,
- possibly killing some innocent following sector */
- if (block == 0 && drive->remap_0_to_1 == 1)
- block = 1; /* redirect MBR access to EZ-Drive partn table */
-
if (blk_pm_request(rq))
ide_check_pm_state(drive, rq);

SELECT_DRIVE(drive);
- if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) {
+ if (ide_wait_stat(&startstop, drive, drive->ready_stat,
+ ATA_BUSY | ATA_DRQ, WAIT_READY)) {
printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
return startstop;
}
@@ -844,7 +872,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
return ide_special_rq(drive, rq);

drv = *(ide_driver_t **)rq->rq_disk->private_data;
- return drv->do_request(drive, rq, block);
+
+ return drv->do_request(drive, rq, rq->sector);
}
return do_special(drive);
kill_rq:
@@ -1325,7 +1354,7 @@ static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup)
if (hwif->irq == irq) {
stat = hwif->tp_ops->read_status(hwif);

- if (!OK_STAT(stat, READY_STAT, BAD_STAT)) {
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
/* Try to not flood the console with msgs */
static unsigned long last_msgtime, count;
++count;
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
new file mode 100644
index 0000000..cf01564
--- /dev/null
+++ b/drivers/ide/ide-ioctls.c
@@ -0,0 +1,290 @@
+/*
+ * IDE ioctls handling.
+ */
+
+#include
+#include
+
+static const struct ide_ioctl_devset ide_ioctl_settings[] = {
+{ HDIO_GET_32BIT, HDIO_SET_32BIT, &ide_devset_io_32bit },
+{ HDIO_GET_KEEPSETTINGS, HDIO_SET_KEEPSETTINGS, &ide_devset_keepsettings },
+{ HDIO_GET_UNMASKINTR, HDIO_SET_UNMASKINTR, &ide_devset_unmaskirq },
+{ HDIO_GET_DMA, HDIO_SET_DMA, &ide_devset_using_dma },
+{ -1, HDIO_SET_PIO_MODE, &ide_devset_pio_mode },
+{ 0 }
+};
+
+int ide_setting_ioctl(ide_drive_t *drive, struct block_device *bdev,
+ unsigned int cmd, unsigned long arg,
+ const struct ide_ioctl_devset *s)
+{
+ const struct ide_devset *ds;
+ unsigned long flags;
+ int err = -EOPNOTSUPP;
+
+ for (; (ds = s->setting); s++) {
+ if (ds->get && s->get_ioctl == cmd)
+ goto read_val;
+ else if (ds->set && s->set_ioctl == cmd)
+ goto set_val;
+ }
+
+ return err;
+
+read_val:
+ mutex_lock(&ide_setting_mtx);
+ spin_lock_irqsave(&ide_lock, flags);
+ err = ds->get(drive);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ mutex_unlock(&ide_setting_mtx);
+ return err >= 0 ? put_user(err, (long __user *)arg) : err;
+
+set_val:
+ if (bdev != bdev->bd_contains)
+ err = -EINVAL;
+ else {
+ if (!capable(CAP_SYS_ADMIN))
+ err = -EACCES;
+ else {
+ mutex_lock(&ide_setting_mtx);
+ err = ide_devset_execute(drive, ds, arg);
+ mutex_unlock(&ide_setting_mtx);
+ }
+ }
+ return err;
+}
+EXPORT_SYMBOL_GPL(ide_setting_ioctl);
+
+static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd,
+ unsigned long arg)
+{
+ u16 *id = NULL;
+ int size = (cmd == HDIO_GET_IDENTITY) ? (ATA_ID_WORDS * 2) : 142;
+ int rc = 0;
+
+ if (drive->id_read == 0) {
+ rc = -ENOMSG;
+ goto out;
+ }
+
+ id = kmalloc(size, GFP_KERNEL);
+ if (id == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(id, drive->id, size);
+ ata_id_to_hd_driveid(id);
+
+ if (copy_to_user((void __user *)arg, id, size))
+ rc = -EFAULT;
+
+ kfree(id);
+out:
+ return rc;
+}
+
+static int ide_get_nice_ioctl(ide_drive_t *drive, unsigned long arg)
+{
+ return put_user((drive->dsc_overlap << IDE_NICE_DSC_OVERLAP) |
+ (drive->nice1 << IDE_NICE_1), (long __user *)arg);
+}
+
+static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)
+{
+ if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
+ return -EPERM;
+
+ if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) &&
+ (drive->media == ide_disk || drive->media == ide_floppy ||
+ drive->scsi))
+ return -EPERM;
+
+ drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
+ drive->nice1 = (arg >> IDE_NICE_1) & 1;
+
+ return 0;
+}
+
+static int ide_cmd_ioctl(ide_drive_t *drive, unsigned cmd, unsigned long arg)
+{
+ u8 *buf = NULL;
+ int bufsize = 0, err = 0;
+ u8 args[4], xfer_rate = 0;
+ ide_task_t tfargs;
+ struct ide_taskfile *tf = &tfargs.tf;
+ u16 *id = drive->id;
+
+ if (NULL == (void *) arg) {
+ struct request *rq;
+
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
+ err = blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
+
+ return err;
+ }
+
+ if (copy_from_user(args, (void __user *)arg, 4))
+ return -EFAULT;
+
+ memset(&tfargs, 0, sizeof(ide_task_t));
+ tf->feature = args[2];
+ if (args[0] == ATA_CMD_SMART) {
+ tf->nsect = args[3];
+ tf->lbal = args[1];
+ tf->lbam = 0x4f;
+ tf->lbah = 0xc2;
+ tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT;
+ } else {
+ tf->nsect = args[1];
+ tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE |
+ IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT;
+ }
+ tf->command = args[0];
+ tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA;
+
+ if (args[3]) {
+ tfargs.tf_flags |= IDE_TFLAG_IO_16BIT;
+ bufsize = SECTOR_SIZE * args[3];
+ buf = kzalloc(bufsize, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+ }
+
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_XFER &&
+ tf->nsect >= XFER_SW_DMA_0 &&
+ (id[ATA_ID_UDMA_MODES] ||
+ id[ATA_ID_MWDMA_MODES] ||
+ id[ATA_ID_SWDMA_MODES])) {
+ xfer_rate = args[1];
+ if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) {
+ printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
+ "be set\n", drive->name);
+ goto abort;
+ }
+ }
+
+ err = ide_raw_taskfile(drive, &tfargs, buf, args[3]);
+
+ args[0] = tf->status;
+ args[1] = tf->error;
+ args[2] = tf->nsect;
+
+ if (!err && xfer_rate) {
+ /* active-retuning-calls future */
+ ide_set_xfer_rate(drive, xfer_rate);
+ ide_driveid_update(drive);
+ }
+abort:
+ if (copy_to_user((void __user *)arg, &args, 4))
+ err = -EFAULT;
+ if (buf) {
+ if (copy_to_user((void __user *)(arg + 4), buf, bufsize))
+ err = -EFAULT;
+ kfree(buf);
+ }
+ return err;
+}
+
+static int ide_task_ioctl(ide_drive_t *drive, unsigned cmd, unsigned long arg)
+{
+ void __user *p = (void __user *)arg;
+ int err = 0;
+ u8 args[7];
+ ide_task_t task;
+
+ if (copy_from_user(args, p, 7))
+ return -EFAULT;
+
+ memset(&task, 0, sizeof(task));
+ memcpy(&task.tf_array[7], &args[1], 6);
+ task.tf.command = args[0];
+ task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+
+ err = ide_no_data_taskfile(drive, &task);
+
+ args[0] = task.tf.command;
+ memcpy(&args[1], &task.tf_array[7], 6);
+
+ if (copy_to_user(p, args, 7))
+ err = -EFAULT;
+
+ return err;
+}
+
+static int generic_drive_reset(ide_drive_t *drive)
+{
+ struct request *rq;
+ int ret = 0;
+
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd_len = 1;
+ rq->cmd[0] = REQ_DRIVE_RESET;
+ rq->cmd_flags |= REQ_SOFTBARRIER;
+ if (blk_execute_rq(drive->queue, NULL, rq, 1))
+ ret = rq->errors;
+ blk_put_request(rq);
+ return ret;
+}
+
+int generic_ide_ioctl(ide_drive_t *drive, struct file *file,
+ struct block_device *bdev,
+ unsigned int cmd, unsigned long arg)
+{
+ int err;
+
+ err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_ioctl_settings);
+ if (err != -EOPNOTSUPP)
+ return err;
+
+ switch (cmd) {
+ case HDIO_OBSOLETE_IDENTITY:
+ case HDIO_GET_IDENTITY:
+ if (bdev != bdev->bd_contains)
+ return -EINVAL;
+ return ide_get_identity_ioctl(drive, cmd, arg);
+ case HDIO_GET_NICE:
+ return ide_get_nice_ioctl(drive, arg);
+ case HDIO_SET_NICE:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ return ide_set_nice_ioctl(drive, arg);
+#ifdef CONFIG_IDE_TASK_IOCTL
+ case HDIO_DRIVE_TASKFILE:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ if (drive->media == ide_disk)
+ return ide_taskfile_ioctl(drive, cmd, arg);
+ return -ENOMSG;
+#endif
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ide_cmd_ioctl(drive, cmd, arg);
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ide_task_ioctl(drive, cmd, arg);
+ case HDIO_DRIVE_RESET:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ return generic_drive_reset(drive);
+ case HDIO_GET_BUSSTATE:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ if (put_user(BUSSTATE_ON, (long __user *)arg))
+ return -EFAULT;
+ return 0;
+ case HDIO_SET_BUSSTATE:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ return -EOPNOTSUPP;
+ default:
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL(generic_ide_ioctl);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 2cbadff..0a2fd3b 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -18,7 +18,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -400,97 +399,14 @@ const struct ide_tp_ops default_tp_ops = {
.output_data = ide_output_data,
};

-void ide_fix_driveid (struct hd_driveid *id)
+void ide_fix_driveid(u16 *id)
{
#ifndef __LITTLE_ENDIAN
# ifdef __BIG_ENDIAN
int i;
- u16 *stringcast;
-
- id->config = __le16_to_cpu(id->config);
- id->cyls = __le16_to_cpu(id->cyls);
- id->reserved2 = __le16_to_cpu(id->reserved2);
- id->heads = __le16_to_cpu(id->heads);
- id->track_bytes = __le16_to_cpu(id->track_bytes);
- id->sector_bytes = __le16_to_cpu(id->sector_bytes);
- id->sectors = __le16_to_cpu(id->sectors);
- id->vendor0 = __le16_to_cpu(id->vendor0);
- id->vendor1 = __le16_to_cpu(id->vendor1);
- id->vendor2 = __le16_to_cpu(id->vendor2);
- stringcast = (u16 *)&id->serial_no[0];
- for (i = 0; i < (20/2); i++)
- stringcast[i] = __le16_to_cpu(stringcast[i]);
- id->buf_type = __le16_to_cpu(id->buf_type);
- id->buf_size = __le16_to_cpu(id->buf_size);
- id->ecc_bytes = __le16_to_cpu(id->ecc_bytes);
- stringcast = (u16 *)&id->fw_rev[0];
- for (i = 0; i < (8/2); i++)
- stringcast[i] = __le16_to_cpu(stringcast[i]);
- stringcast = (u16 *)&id->model[0];
- for (i = 0; i < (40/2); i++)
- stringcast[i] = __le16_to_cpu(stringcast[i]);
- id->dword_io = __le16_to_cpu(id->dword_io);
- id->reserved50 = __le16_to_cpu(id->reserved50);
- id->field_valid = __le16_to_cpu(id->field_valid);
- id->cur_cyls = __le16_to_cpu(id->cur_cyls);
- id->cur_heads = __le16_to_cpu(id->cur_heads);
- id->cur_sectors = __le16_to_cpu(id->cur_sectors);
- id->cur_capacity0 = __le16_to_cpu(id->cur_capacity0);
- id->cur_capacity1 = __le16_to_cpu(id->cur_capacity1);
- id->lba_capacity = __le32_to_cpu(id->lba_capacity);
- id->dma_1word = __le16_to_cpu(id->dma_1word);
- id->dma_mword = __le16_to_cpu(id->dma_mword);
- id->eide_pio_modes = __le16_to_cpu(id->eide_pio_modes);
- id->eide_dma_min = __le16_to_cpu(id->eide_dma_min);
- id->eide_dma_time = __le16_to_cpu(id->eide_dma_time);
- id->eide_pio = __le16_to_cpu(id->eide_pio);
- id->eide_pio_iordy = __le16_to_cpu(id->eide_pio_iordy);
- for (i = 0; i < 2; ++i)
- id->words69_70[i] = __le16_to_cpu(id->words69_70[i]);
- for (i = 0; i < 4; ++i)
- id->words71_74[i] = __le16_to_cpu(id->words71_74[i]);
- id->queue_depth = __le16_to_cpu(id->queue_depth);
- for (i = 0; i < 4; ++i)
- id->words76_79[i] = __le16_to_cpu(id->words76_79[i]);
- id->major_rev_num = __le16_to_cpu(id->major_rev_num);
- id->minor_rev_num = __le16_to_cpu(id->minor_rev_num);
- id->command_set_1 = __le16_to_cpu(id->command_set_1);
- id->command_set_2 = __le16_to_cpu(id->command_set_2);
- id->cfsse = __le16_to_cpu(id->cfsse);
- id->cfs_enable_1 = __le16_to_cpu(id->cfs_enable_1);
- id->cfs_enable_2 = __le16_to_cpu(id->cfs_enable_2);
- id->csf_default = __le16_to_cpu(id->csf_default);
- id->dma_ultra = __le16_to_cpu(id->dma_ultra);
- id->trseuc = __le16_to_cpu(id->trseuc);
- id->trsEuc = __le16_to_cpu(id->trsEuc);
- id->CurAPMvalues = __le16_to_cpu(id->CurAPMvalues);
- id->mprc = __le16_to_cpu(id->mprc);
- id->hw_config = __le16_to_cpu(id->hw_config);
- id->acoustic = __le16_to_cpu(id->acoustic);
- id->msrqs = __le16_to_cpu(id->msrqs);
- id->sxfert = __le16_to_cpu(id->sxfert);
- id->sal = __le16_to_cpu(id->sal);
- id->spg = __le32_to_cpu(id->spg);
- id->lba_capacity_2 = __le64_to_cpu(id->lba_capacity_2);
- for (i = 0; i < 22; i++)
- id->words104_125[i] = __le16_to_cpu(id->words104_125[i]);
- id->last_lun = __le16_to_cpu(id->last_lun);
- id->word127 = __le16_to_cpu(id->word127);
- id->dlf = __le16_to_cpu(id->dlf);
- id->csfo = __le16_to_cpu(id->csfo);
- for (i = 0; i < 26; i++)
- id->words130_155[i] = __le16_to_cpu(id->words130_155[i]);
- id->word156 = __le16_to_cpu(id->word156);
- for (i = 0; i < 3; i++)
- id->words157_159[i] = __le16_to_cpu(id->words157_159[i]);
- id->cfa_power = __le16_to_cpu(id->cfa_power);
- for (i = 0; i < 15; i++)
- id->words161_175[i] = __le16_to_cpu(id->words161_175[i]);
- for (i = 0; i < 30; i++)
- id->words176_205[i] = __le16_to_cpu(id->words176_205[i]);
- for (i = 0; i < 49; i++)
- id->words206_254[i] = __le16_to_cpu(id->words206_254[i]);
- id->integrity_word = __le16_to_cpu(id->integrity_word);
+
+ for (i = 0; i < 256; i++)
+ id[i] = __le16_to_cpu(id[i]);
# else
# error "Please fix "
# endif
@@ -501,19 +417,21 @@ void ide_fix_driveid (struct hd_driveid *id)
* ide_fixstring() cleans up and (optionally) byte-swaps a text string,
* removing leading/trailing blanks and compressing internal blanks.
* It is primarily used to tidy up the model name/number fields as
- * returned by the WIN_[P]IDENTIFY commands.
+ * returned by the ATA_CMD_ID_ATA[PI] commands.
*/

void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
{
- u8 *p = s, *end = &s[bytecount & ~1]; /* bytecount must be even */
+ u8 *p, *end = &s[bytecount & ~1]; /* bytecount must be even */

if (byteswap) {
/* convert from big-endian to host byte order */
- for (p = end ; p != s
- be16_to_cpus((u16 *)(p -= 2));
+ for (p = s ; p != end ; p += 2)
+ be16_to_cpus((u16 *) p);
}
+
/* strip leading blanks */
+ p = s;
while (s != end && *s == ' ')
++s;
/* compress internal blanks and strip trailing blanks */
@@ -556,7 +474,7 @@ int drive_is_ready (ide_drive_t *drive)
/* Note: this may clear a pending IRQ!! */
stat = hwif->tp_ops->read_status(hwif);

- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
/* drive busy: definitely not interrupting */
return 0;

@@ -588,10 +506,10 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
udelay(1); /* spec allows drive 400ns to assert "BUSY" */
stat = tp_ops->read_status(hwif);

- if (stat & BUSY_STAT) {
+ if (stat & ATA_BUSY) {
local_irq_set(flags);
timeout += jiffies;
- while ((stat = tp_ops->read_status(hwif)) & BUSY_STAT) {
+ while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
if (time_after(jiffies, timeout)) {
/*
* One last read after the timeout in case
@@ -599,7 +517,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
* progress during the timeout..
*/
stat = tp_ops->read_status(hwif);
- if (!(stat & BUSY_STAT))
+ if ((stat & ATA_BUSY) == 0)
break;

local_irq_restore(flags);
@@ -660,18 +578,18 @@ EXPORT_SYMBOL(ide_wait_stat);
/**
* ide_in_drive_list - look for drive in black/white list
* @id: drive identifier
- * @drive_table: list to inspect
+ * @table: list to inspect
*
* Look for a drive in the blacklist and the whitelist tables
* Returns 1 if the drive is found in the table.
*/

-int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table)
+int ide_in_drive_list(u16 *id, const struct drive_list_entry *table)
{
- for ( ; drive_table->id_model; drive_table++)
- if ((!strcmp(drive_table->id_model, id->model)) &&
- (!drive_table->id_firmware ||
- strstr(id->fw_rev, drive_table->id_firmware)))
+ for ( ; table->id_model; table++)
+ if ((!strcmp(table->id_model, (char *)&id[ATA_ID_PROD])) &&
+ (!table->id_firmware ||
+ strstr((char *)&id[ATA_ID_FW_REV], table->id_firmware)))
return 1;
return 0;
}
@@ -702,7 +620,7 @@ static const struct drive_list_entry ivb_list[] = {
u8 eighty_ninty_three (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
int ivb = ide_in_drive_list(id, ivb_list);

if (hwif->cbl == ATA_CBL_PATA40_SHORT)
@@ -712,7 +630,7 @@ u8 eighty_ninty_three (ide_drive_t *drive)
printk(KERN_DEBUG "%s: skipping word 93 validity check\n",
drive->name);

- if (ide_dev_is_sata(id) && !ivb)
+ if (ata_id_is_sata(id) && !ivb)
return 1;

if (hwif->cbl != ATA_CBL_PATA80 && !ivb)
@@ -724,7 +642,8 @@ u8 eighty_ninty_three (ide_drive_t *drive)
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
- if ((id->hw_config & 0x4000) || (ivb && (id->hw_config & 0x2000)))
+ if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
+ (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
return 1;

no_80w:
@@ -745,8 +664,8 @@ int ide_driveid_update(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- struct hd_driveid *id;
- unsigned long timeout, flags;
+ u16 *id;
+ unsigned long flags;
u8 stat;

/*
@@ -757,29 +676,24 @@ int ide_driveid_update(ide_drive_t *drive)
SELECT_MASK(drive, 1);
tp_ops->set_irq(hwif, 0);
msleep(50);
- tp_ops->exec_command(hwif, WIN_IDENTIFY);
- timeout = jiffies + WAIT_WORSTCASE;
- do {
- if (time_after(jiffies, timeout)) {
- SELECT_MASK(drive, 0);
- return 0; /* drive timed-out */
- }
+ tp_ops->exec_command(hwif, ATA_CMD_ID_ATA);

- msleep(50); /* give drive a breather */
- stat = tp_ops->read_altstatus(hwif);
- } while (stat & BUSY_STAT);
+ if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 1)) {
+ SELECT_MASK(drive, 0);
+ return 0;
+ }

- msleep(50); /* wait for IRQ and DRQ_STAT */
+ msleep(50); /* wait for IRQ and ATA_DRQ */
stat = tp_ops->read_status(hwif);

- if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
+ if (!OK_STAT(stat, ATA_DRQ, BAD_R_STAT)) {
SELECT_MASK(drive, 0);
printk("%s: CHECK for good STATUS\n", drive->name);
return 0;
}
local_irq_save(flags);
SELECT_MASK(drive, 0);
- id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC);
+ id = kmalloc(SECTOR_SIZE, GFP_ATOMIC);
if (!id) {
local_irq_restore(flags);
return 0;
@@ -789,16 +703,16 @@ int ide_driveid_update(ide_drive_t *drive)
local_irq_enable();
local_irq_restore(flags);
ide_fix_driveid(id);
- if (id) {
- drive->id->dma_ultra = id->dma_ultra;
- drive->id->dma_mword = id->dma_mword;
- drive->id->dma_1word = id->dma_1word;
- /* anything more ? */
- kfree(id);
-
- if (drive->using_dma && ide_id_dma_bug(drive))
- ide_dma_off(drive);
- }
+
+ drive->id[ATA_ID_UDMA_MODES] = id[ATA_ID_UDMA_MODES];
+ drive->id[ATA_ID_MWDMA_MODES] = id[ATA_ID_MWDMA_MODES];
+ drive->id[ATA_ID_SWDMA_MODES] = id[ATA_ID_SWDMA_MODES];
+ /* anything more ? */
+
+ kfree(id);
+
+ if (drive->using_dma && ide_id_dma_bug(drive))
+ ide_dma_off(drive);

return 1;
}
@@ -807,6 +721,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+ u16 *id = drive->id, i;
int error = 0;
u8 stat;
ide_task_t task;
@@ -817,7 +732,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
#endif

/* Skip setting PIO flow-control modes on pre-EIDE drives */
- if ((speed & 0xf8) == XFER_PIO_0 && !(drive->id->capability & 0x08))
+ if ((speed & 0xf8) == XFER_PIO_0 && ata_id_has_iordy(drive->id) == 0)
goto skip;

/*
@@ -851,13 +766,13 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)

tp_ops->tf_load(drive, &task);

- tp_ops->exec_command(hwif, WIN_SETFEATURES);
+ tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES);

if (drive->quirk_list == 2)
tp_ops->set_irq(hwif, 1);

error = __ide_wait_stat(drive, drive->ready_stat,
- BUSY_STAT|DRQ_STAT|ERR_STAT,
+ ATA_BUSY | ATA_DRQ | ATA_ERR,
WAIT_CMD, &stat);

SELECT_MASK(drive, 0);
@@ -869,9 +784,9 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
return error;
}

- drive->id->dma_ultra &= ~0xFF00;
- drive->id->dma_mword &= ~0x0F00;
- drive->id->dma_1word &= ~0x0F00;
+ id[ATA_ID_UDMA_MODES] &= ~0xFF00;
+ id[ATA_ID_MWDMA_MODES] &= ~0x0F00;
+ id[ATA_ID_SWDMA_MODES] &= ~0x0F00;

skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
@@ -881,23 +796,17 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
ide_dma_off_quietly(drive);
#endif

- switch(speed) {
- case XFER_UDMA_7: drive->id->dma_ultra |= 0x8080; break;
- case XFER_UDMA_6: drive->id->dma_ultra |= 0x4040; break;
- case XFER_UDMA_5: drive->id->dma_ultra |= 0x2020; break;
- case XFER_UDMA_4: drive->id->dma_ultra |= 0x1010; break;
- case XFER_UDMA_3: drive->id->dma_ultra |= 0x0808; break;
- case XFER_UDMA_2: drive->id->dma_ultra |= 0x0404; break;
- case XFER_UDMA_1: drive->id->dma_ultra |= 0x0202; break;
- case XFER_UDMA_0: drive->id->dma_ultra |= 0x0101; break;
- case XFER_MW_DMA_2: drive->id->dma_mword |= 0x0404; break;
- case XFER_MW_DMA_1: drive->id->dma_mword |= 0x0202; break;
- case XFER_MW_DMA_0: drive->id->dma_mword |= 0x0101; break;
- case XFER_SW_DMA_2: drive->id->dma_1word |= 0x0404; break;
- case XFER_SW_DMA_1: drive->id->dma_1word |= 0x0202; break;
- case XFER_SW_DMA_0: drive->id->dma_1word |= 0x0101; break;
- default: break;
+ if (speed >= XFER_UDMA_0) {
+ i = 1 << (speed - XFER_UDMA_0);
+ id[ATA_ID_UDMA_MODES] |= (i << 8 | i);
+ } else if (speed >= XFER_MW_DMA_0) {
+ i = 1 << (speed - XFER_MW_DMA_0);
+ id[ATA_ID_MWDMA_MODES] |= (i << 8 | i);
+ } else if (speed >= XFER_SW_DMA_0) {
+ i = 1 << (speed - XFER_SW_DMA_0);
+ id[ATA_ID_SWDMA_MODES] |= (i << 8 | i);
}
+
if (!drive->init_speed)
drive->init_speed = speed;
drive->current_speed = speed;
@@ -977,7 +886,7 @@ void ide_execute_pkt_cmd(ide_drive_t *drive)
unsigned long flags;

spin_lock_irqsave(&ide_lock, flags);
- hwif->tp_ops->exec_command(hwif, WIN_PACKETCMD);
+ hwif->tp_ops->exec_command(hwif, ATA_CMD_PACKET);
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);
}
@@ -1010,7 +919,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
udelay (10);
stat = hwif->tp_ops->read_status(hwif);

- if (OK_STAT(stat, 0, BUSY_STAT))
+ if (OK_STAT(stat, 0, ATA_BUSY))
printk("%s: ATAPI reset complete\n", drive->name);
else {
if (time_before(jiffies, hwgroup->poll_timeout)) {
@@ -1056,7 +965,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)

tmp = hwif->tp_ops->read_status(hwif);

- if (!OK_STAT(tmp, 0, BUSY_STAT)) {
+ if (!OK_STAT(tmp, 0, ATA_BUSY)) {
if (time_before(jiffies, hwgroup->poll_timeout)) {
ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
/* continue polling */
@@ -1102,7 +1011,7 @@ out:

static void ide_disk_pre_reset(ide_drive_t *drive)
{
- int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1;
+ int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1;

drive->special.all = 0;
drive->special.b.set_geometry = legacy;
@@ -1187,7 +1096,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
pre_reset(drive);
SELECT_DRIVE(drive);
udelay (20);
- tp_ops->exec_command(hwif, WIN_SRST);
+ tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
ndelay(400);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
hwgroup->polling = 1;
@@ -1270,7 +1179,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
*/
mdelay(1);
stat = hwif->tp_ops->read_status(hwif);
- if ((stat & BUSY_STAT) == 0)
+ if ((stat & ATA_BUSY) == 0)
return 0;
/*
* Assume a value of 0xff means nothing is connected to
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 97fefab..ed426dd 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -2,7 +2,6 @@
#include
#include
#include
-#include
#include
#include

@@ -90,29 +89,31 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)

u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
{
- int pio_mode;
- struct hd_driveid* id = drive->id;
- int overridden = 0;
+ u16 *id = drive->id;
+ int pio_mode = -1, overridden = 0;

if (mode_wanted != 255)
return min_t(u8, mode_wanted, max_mode);

- if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0 &&
- (pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
+ if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0)
+ pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]);
+
+ if (pio_mode != -1) {
printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
} else {
- pio_mode = id->tPIO;
+ pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8;
if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
pio_mode = 2;
overridden = 1;
}
- if (id->field_valid & 2) { /* drive implements ATA2? */
- if (id->capability & 8) { /* IORDY supported? */
- if (id->eide_pio_modes & 7) {
+
+ if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */
+ if (ata_id_has_iordy(id)) {
+ if (id[ATA_ID_PIO_MODES] & 7) {
overridden = 0;
- if (id->eide_pio_modes & 4)
+ if (id[ATA_ID_PIO_MODES] & 4)
pio_mode = 5;
- else if (id->eide_pio_modes & 2)
+ else if (id[ATA_ID_PIO_MODES] & 2)
pio_mode = 4;
else
pio_mode = 3;
@@ -338,16 +339,16 @@ static void ide_dump_sector(ide_drive_t *drive)
static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
printk("{ ");
- if (err & ABRT_ERR) printk("DriveStatusError ");
- if (err & ICRC_ERR)
- printk((err & ABRT_ERR) ? "BadCRC " : "BadSector ");
- if (err & ECC_ERR) printk("UncorrectableError ");
- if (err & ID_ERR) printk("SectorIdNotFound ");
- if (err & TRK0_ERR) printk("TrackZeroNotFound ");
- if (err & MARK_ERR) printk("AddrMarkNotFound ");
+ if (err & ATA_ABORTED) printk("DriveStatusError ");
+ if (err & ATA_ICRC)
+ printk((err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
+ if (err & ATA_UNC) printk("UncorrectableError ");
+ if (err & ATA_IDNF) printk("SectorIdNotFound ");
+ if (err & ATA_TRK0NF) printk("TrackZeroNotFound ");
+ if (err & ATA_AMNF) printk("AddrMarkNotFound ");
printk("}");
- if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR ||
- (err & (ECC_ERR|ID_ERR|MARK_ERR))) {
+ if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK ||
+ (err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) {
ide_dump_sector(drive);
if (HWGROUP(drive) && HWGROUP(drive)->rq)
printk(", sector=%llu",
@@ -359,12 +360,12 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
{
printk("{ ");
- if (err & ILI_ERR) printk("IllegalLengthIndication ");
- if (err & EOM_ERR) printk("EndOfMedia ");
- if (err & ABRT_ERR) printk("AbortedCommand ");
- if (err & MCR_ERR) printk("MediaChangeRequested ");
- if (err & LFS_ERR) printk("LastFailedSense=0x%02x ",
- (err & LFS_ERR) >> 4);
+ if (err & ATAPI_ILI) printk("IllegalLengthIndication ");
+ if (err & ATAPI_EOM) printk("EndOfMedia ");
+ if (err & ATA_ABORTED) printk("AbortedCommand ");
+ if (err & ATA_MCR) printk("MediaChangeRequested ");
+ if (err & ATAPI_LFS) printk("LastFailedSense=0x%02x ",
+ (err & ATAPI_LFS) >> 4);
printk("}\n");
}

@@ -386,19 +387,19 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)

local_irq_save(flags);
printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
printk("Busy ");
else {
- if (stat & READY_STAT) printk("DriveReady ");
- if (stat & WRERR_STAT) printk("DeviceFault ");
- if (stat & SEEK_STAT) printk("SeekComplete ");
- if (stat & DRQ_STAT) printk("DataRequest ");
- if (stat & ECC_STAT) printk("CorrectedError ");
- if (stat & INDEX_STAT) printk("Index ");
- if (stat & ERR_STAT) printk("Error ");
+ if (stat & ATA_DRDY) printk("DriveReady ");
+ if (stat & ATA_DF) printk("DeviceFault ");
+ if (stat & ATA_DSC) printk("SeekComplete ");
+ if (stat & ATA_DRQ) printk("DataRequest ");
+ if (stat & ATA_CORR) printk("CorrectedError ");
+ if (stat & ATA_IDX) printk("Index ");
+ if (stat & ATA_ERR) printk("Error ");
}
printk("}\n");
- if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
+ if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) {
err = ide_read_error(drive);
printk("%s: %s: error=0x%02x ", drive->name, msg, err);
if (drive->media == ide_disk)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 70aa86c..06575a1 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -50,59 +50,54 @@

static void generic_id(ide_drive_t *drive)
{
- drive->id->cyls = drive->cyl;
- drive->id->heads = drive->head;
- drive->id->sectors = drive->sect;
- drive->id->cur_cyls = drive->cyl;
- drive->id->cur_heads = drive->head;
- drive->id->cur_sectors = drive->sect;
+ u16 *id = drive->id;
+
+ id[ATA_ID_CUR_CYLS] = id[ATA_ID_CYLS] = drive->cyl;
+ id[ATA_ID_CUR_HEADS] = id[ATA_ID_HEADS] = drive->head;
+ id[ATA_ID_CUR_SECTORS] = id[ATA_ID_SECTORS] = drive->sect;
}

static void ide_disk_init_chs(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;

/* Extract geometry if we did not already have one for the drive */
if (!drive->cyl || !drive->head || !drive->sect) {
- drive->cyl = drive->bios_cyl = id->cyls;
- drive->head = drive->bios_head = id->heads;
- drive->sect = drive->bios_sect = id->sectors;
+ drive->cyl = drive->bios_cyl = id[ATA_ID_CYLS];
+ drive->head = drive->bios_head = id[ATA_ID_HEADS];
+ drive->sect = drive->bios_sect = id[ATA_ID_SECTORS];
}

/* Handle logical geometry translation by the drive */
- if ((id->field_valid & 1) && id->cur_cyls &&
- id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) {
- drive->cyl = id->cur_cyls;
- drive->head = id->cur_heads;
- drive->sect = id->cur_sectors;
+ if (ata_id_current_chs_valid(id)) {
+ drive->cyl = id[ATA_ID_CUR_CYLS];
+ drive->head = id[ATA_ID_CUR_HEADS];
+ drive->sect = id[ATA_ID_CUR_SECTORS];
}

/* Use physical geometry if what we have still makes no sense */
- if (drive->head > 16 && id->heads && id->heads <= 16) {
- drive->cyl = id->cyls;
- drive->head = id->heads;
- drive->sect = id->sectors;
+ if (drive->head > 16 && id[ATA_ID_HEADS] && id[ATA_ID_HEADS] <= 16) {
+ drive->cyl = id[ATA_ID_CYLS];
+ drive->head = id[ATA_ID_HEADS];
+ drive->sect = id[ATA_ID_SECTORS];
}
}

static void ide_disk_init_mult_count(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
-
- drive->mult_count = 0;
- if (id->max_multsect) {
-#ifdef CONFIG_IDEDISK_MULTI_MODE
- id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0;
- id->multsect_valid = id->multsect ? 1 : 0;
- drive->mult_req = id->multsect_valid ? id->max_multsect : 0;
- drive->special.b.set_multmode = drive->mult_req ? 1 : 0;
-#else /* original, pre IDE-NFG, per request of AC */
- drive->mult_req = 0;
- if (drive->mult_req > id->max_multsect)
- drive->mult_req = id->max_multsect;
- if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect))
+ u16 *id = drive->id;
+ u8 max_multsect = id[ATA_ID_MAX_MULTSECT] & 0xff;
+
+ if (max_multsect) {
+ if ((max_multsect / 2) > 1)
+ id[ATA_ID_MULTSECT] = max_multsect | 0x100;
+ else
+ id[ATA_ID_MULTSECT] &= ~0x1ff;
+
+ drive->mult_req = id[ATA_ID_MULTSECT] & 0xff;
+
+ if (drive->mult_req)
drive->special.b.set_multmode = 1;
-#endif
}
}

@@ -119,10 +114,10 @@ static void ide_disk_init_mult_count(ide_drive_t *drive)
static inline void do_identify (ide_drive_t *drive, u8 cmd)
{
ide_hwif_t *hwif = HWIF(drive);
- int bswap = 1;
- struct hd_driveid *id;
+ u16 *id = drive->id;
+ char *m = (char *)&id[ATA_ID_PROD];
+ int bswap = 1, is_cfa;

- id = drive->id;
/* read 512 bytes of id info */
hwif->tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);

@@ -135,27 +130,28 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
ide_fix_driveid(id);

/*
- * WIN_IDENTIFY returns little-endian info,
- * WIN_PIDENTIFY *usually* returns little-endian info.
+ * ATA_CMD_ID_ATA returns little-endian info,
+ * ATA_CMD_ID_ATAPI *usually* returns little-endian info.
*/
- if (cmd == WIN_PIDENTIFY) {
- if ((id->model[0] == 'N' && id->model[1] == 'E') /* NEC */
- || (id->model[0] == 'F' && id->model[1] == 'X') /* Mitsumi */
- || (id->model[0] == 'P' && id->model[1] == 'i'))/* Pioneer */
+ if (cmd == ATA_CMD_ID_ATAPI) {
+ if ((m[0] == 'N' && m[1] == 'E') || /* NEC */
+ (m[0] == 'F' && m[1] == 'X') || /* Mitsumi */
+ (m[0] == 'P' && m[1] == 'i')) /* Pioneer */
/* Vertos drives may still be weird */
- bswap ^= 1;
+ bswap ^= 1;
}
- ide_fixstring(id->model, sizeof(id->model), bswap);
- ide_fixstring(id->fw_rev, sizeof(id->fw_rev), bswap);
- ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap);
+
+ ide_fixstring(m, ATA_ID_PROD_LEN, bswap);
+ ide_fixstring((char *)&id[ATA_ID_FW_REV], ATA_ID_FW_REV_LEN, bswap);
+ ide_fixstring((char *)&id[ATA_ID_SERNO], ATA_ID_SERNO_LEN, bswap);

/* we depend on this a lot! */
- id->model[sizeof(id->model)-1] = '\0';
+ m[ATA_ID_PROD_LEN - 1] = '\0';

- if (strstr(id->model, "E X A B Y T E N E S T"))
+ if (strstr(m, "E X A B Y T E N E S T"))
goto err_misc;

- printk(KERN_INFO "%s: %s, ", drive->name, id->model);
+ printk(KERN_INFO "%s: %s, ", drive->name, m);

drive->present = 1;
drive->dead = 0;
@@ -163,16 +159,16 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
/*
* Check for an ATAPI device
*/
- if (cmd == WIN_PIDENTIFY) {
- u8 type = (id->config >> 8) & 0x1f;
+ if (cmd == ATA_CMD_ID_ATAPI) {
+ u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f;

printk(KERN_CONT "ATAPI ");
switch (type) {
case ide_floppy:
- if (!strstr(id->model, "CD-ROM")) {
- if (!strstr(id->model, "oppy") &&
- !strstr(id->model, "poyp") &&
- !strstr(id->model, "ZIP"))
+ if (!strstr(m, "CD-ROM")) {
+ if (!strstr(m, "oppy") &&
+ !strstr(m, "poyp") &&
+ !strstr(m, "ZIP"))
printk(KERN_CONT "cdrom or floppy?, assuming ");
if (drive->media != ide_cdrom) {
printk(KERN_CONT "FLOPPY");
@@ -186,8 +182,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
drive->removable = 1;
#ifdef CONFIG_PPC
/* kludge for Apple PowerBook internal zip */
- if (!strstr(id->model, "CD-ROM") &&
- strstr(id->model, "ZIP")) {
+ if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
printk(KERN_CONT "FLOPPY");
type = ide_floppy;
break;
@@ -217,18 +212,15 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
* Not an ATAPI device: looks like a "regular" hard disk
*/

- /*
- * 0x848a = CompactFlash device
- * These are *not* removable in Linux definition of the term
- */
+ is_cfa = ata_id_is_cfa(id);

- if ((id->config != 0x848a) && (id->config & (1<<7)))
+ /* CF devices are *not* removable in Linux definition of the term */
+ if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
drive->removable = 1;

drive->media = ide_disk;

- printk(KERN_CONT "%s DISK drive\n",
- (id->config == 0x848a) ? "CFA" : "ATA");
+ printk(KERN_CONT "%s DISK drive\n", is_cfa ? "CFA" : "ATA");

return;

@@ -268,7 +260,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
if (io_ports->ctl_addr) {
a = tp_ops->read_altstatus(hwif);
s = tp_ops->read_status(hwif);
- if ((a ^ s) & ~INDEX_STAT)
+ if ((a ^ s) & ~ATA_IDX)
/* ancient Seagate drives, broken interfaces */
printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
"instead of ALTSTATUS(0x%02x)\n",
@@ -281,7 +273,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
/* set features register for atapi
* identify command to be sure of reply
*/
- if (cmd == WIN_PIDENTIFY) {
+ if (cmd == ATA_CMD_ID_ATAPI) {
ide_task_t task;

memset(&task, 0, sizeof(task));
@@ -294,24 +286,16 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
/* ask drive for ID */
tp_ops->exec_command(hwif, cmd);

- timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
- timeout += jiffies;
- do {
- if (time_after(jiffies, timeout)) {
- /* drive timed-out */
- return 1;
- }
- /* give drive a breather */
- msleep(50);
- s = use_altstatus ? tp_ops->read_altstatus(hwif)
- : tp_ops->read_status(hwif);
- } while (s & BUSY_STAT);
+ timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;

- /* wait for IRQ and DRQ_STAT */
+ if (ide_busy_sleep(hwif, timeout, use_altstatus))
+ return 1;
+
+ /* wait for IRQ and ATA_DRQ */
msleep(50);
s = tp_ops->read_status(hwif);

- if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) {
+ if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) {
unsigned long flags;

/* local CPU only; some systems need this */
@@ -387,19 +371,21 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
return retval;
}

-static int ide_busy_sleep(ide_hwif_t *hwif)
+int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
{
- unsigned long timeout = jiffies + WAIT_WORSTCASE;
u8 stat;

+ timeout += jiffies;
+
do {
- msleep(50);
- stat = hwif->tp_ops->read_status(hwif);
- if ((stat & BUSY_STAT) == 0)
+ msleep(50); /* give drive a breather */
+ stat = altstatus ? hwif->tp_ops->read_altstatus(hwif)
+ : hwif->tp_ops->read_status(hwif);
+ if ((stat & ATA_BUSY) == 0)
return 0;
} while (time_before(jiffies, timeout));

- return 1;
+ return 1; /* drive timed-out */
}

static u8 ide_read_device(ide_drive_t *drive)
@@ -444,13 +430,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd)

if (drive->present) {
/* avoid waiting for inappropriate probes */
- if ((drive->media != ide_disk) && (cmd == WIN_IDENTIFY))
+ if (drive->media != ide_disk && cmd == ATA_CMD_ID_ATA)
return 4;
}
#ifdef DEBUG
printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n",
drive->name, drive->present, drive->media,
- (cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI");
+ (cmd == ATA_CMD_ID_ATA) ? "ATA" : "ATAPI");
#endif

/* needed for some systems
@@ -464,7 +450,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
if (drive->select.b.unit != 0) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
- /* allow BUSY_STAT to assert & clear */
+ /* allow ATA_BUSY to assert & clear */
msleep(50);
}
/* no i/f present: mmm.. this should be a 4 -ml */
@@ -473,8 +459,8 @@ static int do_probe (ide_drive_t *drive, u8 cmd)

stat = tp_ops->read_status(hwif);

- if (OK_STAT(stat, READY_STAT, BUSY_STAT) ||
- drive->present || cmd == WIN_PIDENTIFY) {
+ if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) ||
+ drive->present || cmd == ATA_CMD_ID_ATAPI) {
/* send cmd and wait */
if ((rc = try_to_identify(drive, cmd))) {
/* failed: try again */
@@ -483,17 +469,17 @@ static int do_probe (ide_drive_t *drive, u8 cmd)

stat = tp_ops->read_status(hwif);

- if (stat == (BUSY_STAT | READY_STAT))
+ if (stat == (ATA_BUSY | ATA_DRDY))
return 4;

- if (rc == 1 && cmd == WIN_PIDENTIFY) {
+ if (rc == 1 && cmd == ATA_CMD_ID_ATAPI) {
printk(KERN_ERR "%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name, stat);
msleep(50);
SELECT_DRIVE(drive);
msleep(50);
- tp_ops->exec_command(hwif, WIN_SRST);
- (void)ide_busy_sleep(hwif);
+ tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
+ (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0);
rc = try_to_identify(drive, cmd);
}

@@ -526,13 +512,14 @@ static void enable_nest (ide_drive_t *drive)
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
u8 stat;

- printk(KERN_INFO "%s: enabling %s -- ", hwif->name, drive->id->model);
+ printk(KERN_INFO "%s: enabling %s -- ",
+ hwif->name, (char *)&drive->id[ATA_ID_PROD]);

SELECT_DRIVE(drive);
msleep(50);
- tp_ops->exec_command(hwif, EXABYTE_ENABLE_NEST);
+ tp_ops->exec_command(hwif, ATA_EXABYTE_ENABLE_NEST);

- if (ide_busy_sleep(hwif)) {
+ if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 0)) {
printk(KERN_CONT "failed (timeout)\n");
return;
}
@@ -545,12 +532,6 @@ static void enable_nest (ide_drive_t *drive)
printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
else
printk(KERN_CONT "success\n");
-
- /* if !(success||timed-out) */
- if (do_probe(drive, WIN_IDENTIFY) >= 2) {
- /* look for ATAPI device */
- (void) do_probe(drive, WIN_PIDENTIFY);
- }
}

/**
@@ -567,6 +548,8 @@ static void enable_nest (ide_drive_t *drive)

static inline u8 probe_for_drive (ide_drive_t *drive)
{
+ char *m;
+
/*
* In order to keep things simple we have an id
* block for all drives at all times. If the device
@@ -576,29 +559,34 @@ static inline u8 probe_for_drive (ide_drive_t *drive)
* Also note that 0 everywhere means "can't do X"
*/

- drive->id = kzalloc(SECTOR_WORDS *4, GFP_KERNEL);
+ drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
drive->id_read = 0;
if(drive->id == NULL)
{
printk(KERN_ERR "ide: out of memory for id data.\n");
return 0;
}
- strcpy(drive->id->model, "UNKNOWN");
-
+
+ m = (char *)&drive->id[ATA_ID_PROD];
+ strcpy(m, "UNKNOWN");
+
/* skip probing? */
- if (!drive->noprobe)
- {
+ if (!drive->noprobe) {
+retry:
/* if !(success||timed-out) */
- if (do_probe(drive, WIN_IDENTIFY) >= 2) {
+ if (do_probe(drive, ATA_CMD_ID_ATA) >= 2)
/* look for ATAPI device */
- (void) do_probe(drive, WIN_PIDENTIFY);
- }
+ (void)do_probe(drive, ATA_CMD_ID_ATAPI);
+
if (!drive->present)
/* drive not found */
return 0;
- if (strstr(drive->id->model, "E X A B Y T E N E S T"))
+
+ if (strstr(m, "E X A B Y T E N E S T")) {
enable_nest(drive);
-
+ goto retry;
+ }
+
/* identification failed? */
if (!drive->id_read) {
if (drive->media == ide_disk) {
@@ -740,36 +728,38 @@ out:

/**
* ide_undecoded_slave - look for bad CF adapters
- * @drive1: drive
+ * @dev1: slave device
*
* Analyse the drives on the interface and attempt to decide if we
* have the same drive viewed twice. This occurs with crap CF adapters
* and PCMCIA sometimes.
*/

-void ide_undecoded_slave(ide_drive_t *drive1)
+void ide_undecoded_slave(ide_drive_t *dev1)
{
- ide_drive_t *drive0 = &drive1->hwif->drives[0];
+ ide_drive_t *dev0 = &dev1->hwif->drives[0];

- if ((drive1->dn & 1) == 0 || drive0->present == 0)
+ if ((dev1->dn & 1) == 0 || dev0->present == 0)
return;

/* If the models don't match they are not the same product */
- if (strcmp(drive0->id->model, drive1->id->model))
+ if (strcmp((char *)&dev0->id[ATA_ID_PROD],
+ (char *)&dev1->id[ATA_ID_PROD]))
return;

/* Serial numbers do not match */
- if (strncmp(drive0->id->serial_no, drive1->id->serial_no, 20))
+ if (strncmp((char *)&dev0->id[ATA_ID_SERNO],
+ (char *)&dev1->id[ATA_ID_SERNO], ATA_ID_SERNO_LEN))
return;

/* No serial number, thankfully very rare for CF */
- if (drive0->id->serial_no[0] == 0)
+ if (*(char *)&dev0->id[ATA_ID_SERNO] == 0)
return;

/* Appears to be an IDE flash adapter with decode bugs */
printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n");

- drive1->present = 0;
+ dev1->present = 0;
}

EXPORT_SYMBOL_GPL(ide_undecoded_slave);
@@ -853,7 +843,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
drive->no_io_32bit = 1;
else
- drive->no_io_32bit = drive->id->dword_io ? 1 : 0;
+ drive->no_io_32bit = drive->id[ATA_ID_DWORD_IO] ? 1 : 0;
}
}

@@ -1037,11 +1027,6 @@ static int init_irq (ide_hwif_t *hwif)
ide_hwgroup_t *hwgroup;
ide_hwif_t *match = NULL;

-
- BUG_ON(in_interrupt());
- BUG_ON(irqs_disabled());
- BUG_ON(hwif == NULL);
-
mutex_lock(&ide_cfg_mtx);
hwif->hwgroup = NULL;
#if MAX_HWIFS > 1
@@ -1116,7 +1101,8 @@ static int init_irq (ide_hwif_t *hwif)
sa = IRQF_SHARED;
#endif /* __mc68000__ */

- if (IDE_CHIPSET_IS_PCI(hwif->chipset))
+ if (hwif->chipset == ide_pci || hwif->chipset == ide_cmd646 ||
+ hwif->chipset == ide_ali14xx)
sa = IRQF_SHARED;

if (io_ports->ctl_addr)
@@ -1344,8 +1330,6 @@ static void hwif_register_devices(ide_hwif_t *hwif)
if (!drive->present)
continue;

- ide_add_generic_settings(drive);
-
snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
dev->parent = &hwif->gendev;
dev->bus = &ide_bus_type;
@@ -1602,8 +1586,10 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
if (hws[0])
host->dev[0] = hws[0]->dev;

- if (d)
+ if (d) {
+ host->init_chipset = d->init_chipset;
host->host_flags = d->host_flags;
+ }

return host;
}
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index f66c9c3..e7030a4 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -12,14 +12,6 @@
* "settings" files. e.g. "cat /proc/ide0/hda/settings"
* To write a new value "val" into a specific setting "name", use:
* echo "name:val" >/proc/ide/ide0/hda/settings
- *
- * Also useful, "cat /proc/ide0/hda/[identify, smart_values,
- * smart_thresholds, capabilities]" will issue an IDENTIFY /
- * PACKET_IDENTIFY / SMART_READ_VALUES / SMART_READ_THRESHOLDS /
- * SENSE CAPABILITIES command to /dev/hda, and then dump out the
- * returned data as 256 16-bit words. The "hdparm" utility will
- * be updated someday soon to use this mechanism.
- *
*/

#include
@@ -31,7 +23,6 @@
#include
#include
#include
-#include
#include
#include

@@ -109,13 +100,14 @@ static int proc_ide_read_identify

err = taskfile_lib_get_identify(drive, page);
if (!err) {
- char *out = ((char *)page) + (SECTOR_WORDS * 4);
+ char *out = (char *)page + SECTOR_SIZE;
+
page = out;
do {
out += sprintf(out, "%04x%c",
le16_to_cpup(val), (++i & 7) ? ' ' : '\n');
val += 1;
- } while (i < (SECTOR_WORDS * 2));
+ } while (i < SECTOR_SIZE / 2);
len = out - page;
}
}
@@ -123,140 +115,25 @@ static int proc_ide_read_identify
}

/**
- * __ide_add_setting - add an ide setting option
- * @drive: drive to use
- * @name: setting name
- * @rw: true if the function is read write
- * @data_type: type of data
- * @min: range minimum
- * @max: range maximum
- * @mul_factor: multiplication scale
- * @div_factor: divison scale
- * @data: private data field
- * @set: setting
- * @auto_remove: setting auto removal flag
- *
- * Removes the setting named from the device if it is present.
- * The function takes the settings_lock to protect against
- * parallel changes. This function must not be called from IRQ
- * context. Returns 0 on success or -1 on failure.
- *
- * BUGS: This code is seriously over-engineered. There is also
- * magic about how the driver specific features are setup. If
- * a driver is attached we assume the driver settings are auto
- * remove.
- */
-
-static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove)
-{
- ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
-
- mutex_lock(&ide_setting_mtx);
- while ((*p) && strcmp((*p)->name, name) < 0)
- p = &((*p)->next);
- if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
- goto abort;
- if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL)
- goto abort;
- strcpy(setting->name, name);
- setting->rw = rw;
- setting->data_type = data_type;
- setting->min = min;
- setting->max = max;
- setting->mul_factor = mul_factor;
- setting->div_factor = div_factor;
- setting->data = data;
- setting->set = set;
-
- setting->next = *p;
- if (auto_remove)
- setting->auto_remove = 1;
- *p = setting;
- mutex_unlock(&ide_setting_mtx);
- return 0;
-abort:
- mutex_unlock(&ide_setting_mtx);
- kfree(setting);
- return -1;
-}
-
-int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set)
-{
- return __ide_add_setting(drive, name, rw, data_type, min, max, mul_factor, div_factor, data, set, 1);
-}
-
-EXPORT_SYMBOL(ide_add_setting);
-
-/**
- * __ide_remove_setting - remove an ide setting option
- * @drive: drive to use
- * @name: setting name
- *
- * Removes the setting named from the device if it is present.
- * The caller must hold the setting semaphore.
- */
-
-static void __ide_remove_setting(ide_drive_t *drive, char *name)
-{
- ide_settings_t **p, *setting;
-
- p = (ide_settings_t **) &drive->settings;
-
- while ((*p) && strcmp((*p)->name, name))
- p = &((*p)->next);
- setting = (*p);
- if (setting == NULL)
- return;
-
- (*p) = setting->next;
-
- kfree(setting->name);
- kfree(setting);
-}
-
-/**
- * auto_remove_settings - remove driver specific settings
- * @drive: drive
- *
- * Automatically remove all the driver specific settings for this
- * drive. This function may not be called from IRQ context. The
- * caller must hold ide_setting_mtx.
- */
-
-static void auto_remove_settings(ide_drive_t *drive)
-{
- ide_settings_t *setting;
-repeat:
- setting = drive->settings;
- while (setting) {
- if (setting->auto_remove) {
- __ide_remove_setting(drive, setting->name);
- goto repeat;
- }
- setting = setting->next;
- }
-}
-
-/**
- * ide_find_setting_by_name - find a drive specific setting
- * @drive: drive to scan
+ * ide_find_setting - find a specific setting
+ * @st: setting table pointer
* @name: setting name
*
- * Scan's the device setting table for a matching entry and returns
+ * Scan's the setting table for a matching entry and returns
* this or NULL if no entry is found. The caller must hold the
* setting semaphore
*/

-static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name)
+static
+const struct ide_proc_devset *ide_find_setting(const struct ide_proc_devset *st,
+ char *name)
{
- ide_settings_t *setting = drive->settings;
-
- while (setting) {
- if (strcmp(setting->name, name) == 0)
+ while (st->name) {
+ if (strcmp(st->name, name) == 0)
break;
- setting = setting->next;
+ st++;
}
- return setting;
+ return st->name ? st : NULL;
}

/**
@@ -272,26 +149,20 @@ static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name)
* be told apart
*/

-static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting)
+static int ide_read_setting(ide_drive_t *drive,
+ const struct ide_proc_devset *setting)
{
- int val = -EINVAL;
- unsigned long flags;
+ const struct ide_devset *ds = setting->setting;
+ int val = -EINVAL;
+
+ if (ds->get) {
+ unsigned long flags;

- if ((setting->rw & SETTING_READ)) {
spin_lock_irqsave(&ide_lock, flags);
- switch (setting->data_type) {
- case TYPE_BYTE:
- val = *((u8 *) setting->data);
- break;
- case TYPE_SHORT:
- val = *((u16 *) setting->data);
- break;
- case TYPE_INT:
- val = *((u32 *) setting->data);
- break;
- }
+ val = ds->get(drive);
spin_unlock_irqrestore(&ide_lock, flags);
}
+
return val;
}

@@ -313,33 +184,23 @@ static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting)
* The current scheme of polling is kludgy, though safe enough.
*/

-static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val)
+static int ide_write_setting(ide_drive_t *drive,
+ const struct ide_proc_devset *setting, int val)
{
+ const struct ide_devset *ds = setting->setting;
+
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- if (setting->set)
- return setting->set(drive, val);
- if (!(setting->rw & SETTING_WRITE))
+ if (!ds->set)
return -EPERM;
- if (val < setting->min || val > setting->max)
+ if ((ds->flags & DS_SYNC)
+ && (val < setting->min || val > setting->max))
return -EINVAL;
- if (ide_spin_wait_hwgroup(drive))
- return -EBUSY;
- switch (setting->data_type) {
- case TYPE_BYTE:
- *((u8 *) setting->data) = val;
- break;
- case TYPE_SHORT:
- *((u16 *) setting->data) = val;
- break;
- case TYPE_INT:
- *((u32 *) setting->data) = val;
- break;
- }
- spin_unlock_irq(&ide_lock);
- return 0;
+ return ide_devset_execute(drive, ds, val);
}

+ide_devset_get(xfer_rate, current_speed);
+
static int set_xfer_rate (ide_drive_t *drive, int arg)
{
ide_task_t task;
@@ -349,7 +210,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg)
return -EINVAL;

memset(&task, 0, sizeof(task));
- task.tf.command = WIN_SETFEATURES;
+ task.tf.command = ATA_CMD_SET_FEATURES;
task.tf.feature = SETFEATURES_XFER;
task.tf.nsect = (u8)arg;
task.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT |
@@ -364,29 +225,23 @@ static int set_xfer_rate (ide_drive_t *drive, int arg)
return err;
}

-/**
- * ide_add_generic_settings - generic ide settings
- * @drive: drive being configured
- *
- * Add the generic parts of the system settings to the /proc files.
- * The caller must not be holding the ide_setting_mtx.
- */
-
-void ide_add_generic_settings (ide_drive_t *drive)
-{
-/*
- * drive setting name read/write access data type min max mul_factor div_factor data pointer set function
- */
- __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0);
- __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0);
- __ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0);
- __ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0);
- __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0);
- __ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0);
- __ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0);
- __ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0);
- __ide_add_setting(drive, "number", SETTING_RW, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0);
-}
+ide_devset_rw(current_speed, xfer_rate);
+ide_devset_rw_field(init_speed, init_speed);
+ide_devset_rw_field(nice1, nice1);
+ide_devset_rw_field(number, dn);
+
+static const struct ide_proc_devset ide_generic_settings[] = {
+ IDE_PROC_DEVSET(current_speed, 0, 70),
+ IDE_PROC_DEVSET(init_speed, 0, 70),
+ IDE_PROC_DEVSET(io_32bit, 0, 1 + (SUPPORT_VLB_SYNC << 1)),
+ IDE_PROC_DEVSET(keepsettings, 0, 1),
+ IDE_PROC_DEVSET(nice1, 0, 1),
+ IDE_PROC_DEVSET(number, 0, 3),
+ IDE_PROC_DEVSET(pio_mode, 0, 255),
+ IDE_PROC_DEVSET(unmaskirq, 0, 1),
+ IDE_PROC_DEVSET(using_dma, 0, 1),
+ { 0 },
+};

static void proc_ide_settings_warn(void)
{
@@ -403,19 +258,32 @@ static void proc_ide_settings_warn(void)
static int proc_ide_read_settings
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
+ const struct ide_proc_devset *setting, *g, *d;
+ const struct ide_devset *ds;
ide_drive_t *drive = (ide_drive_t *) data;
- ide_settings_t *setting = (ide_settings_t *) drive->settings;
char *out = page;
int len, rc, mul_factor, div_factor;

proc_ide_settings_warn();

mutex_lock(&ide_setting_mtx);
+ g = ide_generic_settings;
+ d = drive->settings;
out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n");
out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n");
- while (setting) {
- mul_factor = setting->mul_factor;
- div_factor = setting->div_factor;
+ while (g->name || (d && d->name)) {
+ /* read settings in the alphabetical order */
+ if (g->name && d && d->name) {
+ if (strcmp(d->name, g->name) < 0)
+ setting = d++;
+ else
+ setting = g++;
+ } else if (d && d->name) {
+ setting = d++;
+ } else
+ setting = g++;
+ mul_factor = setting->mulf ? setting->mulf(drive) : 1;
+ div_factor = setting->divf ? setting->divf(drive) : 1;
out += sprintf(out, "%-24s", setting->name);
rc = ide_read_setting(drive, setting);
if (rc >= 0)
@@ -423,12 +291,12 @@ static int proc_ide_read_settings
else
out += sprintf(out, "%-16s", "write-only");
out += sprintf(out, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor);
- if (setting->rw & SETTING_READ)
+ ds = setting->setting;
+ if (ds->get)
out += sprintf(out, "r");
- if (setting->rw & SETTING_WRITE)
+ if (ds->set)
out += sprintf(out, "w");
out += sprintf(out, "\n");
- setting = setting->next;
}
len = out - page;
mutex_unlock(&ide_setting_mtx);
@@ -442,9 +310,10 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer,
{
ide_drive_t *drive = (ide_drive_t *) data;
char name[MAX_LEN + 1];
- int for_real = 0;
+ int for_real = 0, mul_factor, div_factor;
unsigned long n;
- ide_settings_t *setting;
+
+ const struct ide_proc_devset *setting;
char *buf, *s;

if (!capable(CAP_SYS_ADMIN))
@@ -512,13 +381,21 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer,
}

mutex_lock(&ide_setting_mtx);
- setting = ide_find_setting_by_name(drive, name);
+ /* generic settings first, then driver specific ones */
+ setting = ide_find_setting(ide_generic_settings, name);
if (!setting) {
- mutex_unlock(&ide_setting_mtx);
- goto parse_error;
+ if (drive->settings)
+ setting = ide_find_setting(drive->settings, name);
+ if (!setting) {
+ mutex_unlock(&ide_setting_mtx);
+ goto parse_error;
+ }
+ }
+ if (for_real) {
+ mul_factor = setting->mulf ? setting->mulf(drive) : 1;
+ div_factor = setting->divf ? setting->divf(drive) : 1;
+ ide_write_setting(drive, setting, val * div_factor / mul_factor);
}
- if (for_real)
- ide_write_setting(drive, setting, val * setting->div_factor / setting->mul_factor);
mutex_unlock(&ide_setting_mtx);
}
} while (!for_real++);
@@ -561,11 +438,10 @@ static int proc_ide_read_dmodel
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
ide_drive_t *drive = (ide_drive_t *) data;
- struct hd_driveid *id = drive->id;
+ char *m = (char *)&drive->id[ATA_ID_PROD];
int len;

- len = sprintf(page, "%.40s\n",
- (id && id->model[0]) ? (char *)id->model : "(none)");
+ len = sprintf(page, "%.40s\n", m[0] ? m : "(none)");
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}

@@ -690,6 +566,10 @@ static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t

void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver)
{
+ mutex_lock(&ide_setting_mtx);
+ drive->settings = driver->settings;
+ mutex_unlock(&ide_setting_mtx);
+
ide_add_proc_entries(drive->proc, driver->proc, drive);
}

@@ -726,7 +606,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
* OTOH both ide_{read,write}_setting are only ever used under
* ide_setting_mtx.
*/
- auto_remove_settings(drive);
+ drive->settings = NULL;
spin_unlock_irqrestore(&ide_lock, flags);
mutex_unlock(&ide_setting_mtx);
}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 3833189..f8c84df 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -15,6 +15,8 @@
* Documentation/ide/ChangeLog.ide-tape.1995-2002
*/

+#define DRV_NAME "ide-tape"
+
#define IDETAPE_VERSION "1.20"

#include
@@ -54,8 +56,6 @@ enum {
DBG_CHRDEV = (1 << 2),
/* all remaining procedures */
DBG_PROCS = (1 << 3),
- /* buffer alloc info (pc_stack & rq_stack) */
- DBG_PCRQ_STACK = (1 << 4),
};

/* define to see debug info */
@@ -81,26 +81,6 @@ enum {
#define IDETAPE_MAX_PC_RETRIES 3

/*
- * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE
- * bytes. This is used for several packet commands (Not for READ/WRITE commands)
- */
-#define IDETAPE_PC_BUFFER_SIZE 256
-
-/*
- * In various places in the driver, we need to allocate storage
- * for packet commands and requests, which will remain valid while
- * we leave the driver to wait for an interrupt or a timeout event.
- */
-#define IDETAPE_PC_STACK (10 + IDETAPE_MAX_PC_RETRIES)
-
-/*
- * Some drives (for example, Seagate STT3401A Travan) require a very long
- * timeout, because they don't return an interrupt or clear their busy bit
- * until after the command completes (even retension commands).
- */
-#define IDETAPE_WAIT_CMD (900*HZ)
-
-/*
* The following parameter is used to select the point in the internal tape fifo
* in which we will start to refill the buffer. Decreasing the following
* parameter will improve the system's latency and interactive response, while
@@ -172,20 +152,6 @@ struct idetape_bh {
#define IDETAPE_LU_RETENSION_MASK 2
#define IDETAPE_LU_EOT_MASK 4

-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
- REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
- REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
- REQ_IDETAPE_READ = (1 << 2),
- REQ_IDETAPE_WRITE = (1 << 3),
-};
-
/* Error codes returned in rq->errors to the higher part of the driver. */
#define IDETAPE_ERROR_GENERAL 101
#define IDETAPE_ERROR_FILEMARK 102
@@ -206,13 +172,6 @@ typedef struct ide_tape_obj {
struct kref kref;

/*
- * Since a typical character device operation requires more
- * than one packet command, we provide here enough memory
- * for the maximum of interconnected packet commands.
- * The packet commands are stored in the circular array pc_stack.
- * pc_stack_index points to the last used entry, and warps around
- * to the start when we get to the last array entry.
- *
* pc points to the current processed packet command.
*
* failed_pc points to the last failed packet command, or contains
@@ -224,13 +183,11 @@ typedef struct ide_tape_obj {
struct ide_atapi_pc *pc;
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
- /* Packet command stack */
- struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK];
- /* Next free packet command storage space */
- int pc_stack_index;
- struct request rq_stack[IDETAPE_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
+ /* used by REQ_IDETAPE_{READ,WRITE} requests */
+ struct ide_atapi_pc queued_pc;
+
+ struct ide_atapi_pc request_sense_pc;
+ struct request request_sense_rq;

/*
* DSC polling variables.
@@ -451,47 +408,6 @@ static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
}

/*
- * idetape_next_pc_storage returns a pointer to a place in which we can
- * safely store a packet command, even though we intend to leave the
- * driver. A storage space for a maximum of IDETAPE_PC_STACK packet
- * commands is allocated at initialization time.
- */
-static struct ide_atapi_pc *idetape_next_pc_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
-
- if (tape->pc_stack_index == IDETAPE_PC_STACK)
- tape->pc_stack_index = 0;
- return (&tape->pc_stack[tape->pc_stack_index++]);
-}
-
-/*
- * idetape_next_rq_storage is used along with idetape_next_pc_storage.
- * Since we queue packet commands in the request queue, we need to
- * allocate a request, along with the allocation of a packet command.
- */
-
-/************************************************** ************
- * *
- * This should get fixed to use kmalloc(.., GFP_ATOMIC) *
- * followed later on by kfree(). -ml *
- * *
- ************************************************** ************/
-
-static struct request *idetape_next_rq_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
-
- if (tape->rq_stack_index == IDETAPE_PC_STACK)
- tape->rq_stack_index = 0;
- return (&tape->rq_stack[tape->rq_stack_index++]);
-}
-
-/*
* called on each failed packet command retry to analyze the request sense. We
* currently do not utilize this information.
*/
@@ -667,61 +583,14 @@ static void ide_tape_callback(ide_drive_t *drive)
idetape_end_request(drive, uptodate, 0);
}

-static void idetape_init_pc(struct ide_atapi_pc *pc)
-{
- memset(pc->c, 0, 12);
- pc->retries = 0;
- pc->flags = 0;
- pc->req_xfer = 0;
- pc->buf = pc->pc_buf;
- pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
- pc->bh = NULL;
- pc->b_data = NULL;
-}
-
static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = REQUEST_SENSE;
pc->c[4] = 20;
pc->req_xfer = 20;
}

-static void idetape_init_rq(struct request *rq, u8 cmd)
-{
- blk_rq_init(NULL, rq);
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd[13] = cmd;
-}
-
-/*
- * Generate a new packet command request in front of the request queue, before
- * the current request, so that it will be processed immediately, on the next
- * pass through the driver. The function below is called from the request
- * handling part of the driver (the "bottom" part). Safe storage for the request
- * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that.
- *
- * Memory for those requests is pre-allocated at initialization time, and is
- * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for
- * the maximum possible number of inter-dependent packet commands.
- *
- * The higher level of the driver - The ioctl handler and the character device
- * handling functions should queue request to the lower level part and wait for
- * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
- */
-static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
- struct request *rq)
-{
- struct ide_tape_obj *tape = drive->driver_data;
-
- idetape_init_rq(rq, REQ_IDETAPE_PC1);
- rq->cmd_flags |= REQ_PREEMPT;
- rq->buffer = (char *) pc;
- rq->rq_disk = tape->disk;
- memcpy(rq->cmd, pc->c, 12);
- ide_do_drive_cmd(drive, rq);
-}
-
/*
* idetape_retry_pc is called when an error was detected during the
* last packet command. We queue a request sense packet command in
@@ -729,15 +598,14 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
*/
static void idetape_retry_pc(ide_drive_t *drive)
{
- struct ide_atapi_pc *pc;
- struct request *rq;
+ struct ide_tape_obj *tape = drive->driver_data;
+ struct request *rq = &tape->request_sense_rq;
+ struct ide_atapi_pc *pc = &tape->request_sense_pc;

(void)ide_read_error(drive);
- pc = idetape_next_pc_storage(drive);
- rq = idetape_next_rq_storage(drive);
idetape_create_request_sense_cmd(pc);
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- idetape_queue_pc_head(drive, pc, rq);
+ ide_queue_pc_head(drive, tape->disk, pc, rq);
}

/*
@@ -766,13 +634,15 @@ static void ide_tape_handle_dsc(ide_drive_t *drive)
idetape_postpone_request(drive);
}

-static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
+static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount, int write)
{
if (write)
idetape_output_buffers(drive, pc, bcount);
else
idetape_input_buffers(drive, pc, bcount);
+
+ return bcount;
}

/*
@@ -786,7 +656,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;

- return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD,
+ return ide_pc_intr(drive, tape->pc, idetape_pc_intr, WAIT_TAPE_CMD,
NULL, idetape_update_buffers, idetape_retry_pc,
ide_tape_handle_dsc, ide_tape_io_buffers);
}
@@ -832,7 +702,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
idetape_tape_t *tape = drive->driver_data;

return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
- IDETAPE_WAIT_CMD, NULL);
+ WAIT_TAPE_CMD, NULL);
}

static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
@@ -881,13 +751,13 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->retries++;

return ide_issue_pc(drive, pc, idetape_transfer_pc,
- IDETAPE_WAIT_CMD, NULL);
+ WAIT_TAPE_CMD, NULL);
}

/* A mode sense command is used to "sense" tape parameters. */
static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = MODE_SENSE;
if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
/* DBD = 1 - Don't return block descriptors */
@@ -920,8 +790,8 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)

stat = hwif->tp_ops->read_status(hwif);

- if (stat & SEEK_STAT) {
- if (stat & ERR_STAT) {
+ if (stat & ATA_DSC) {
+ if (stat & ATA_ERR) {
/* Error detected */
if (pc->c[0] != TEST_UNIT_READY)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
@@ -946,7 +816,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
struct idetape_bh *bh = (struct idetape_bh *)rq->special;
unsigned int length = rq->current_nr_sectors;

- idetape_init_pc(pc);
+ ide_init_pc(pc);
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
pc->bh = bh;
@@ -978,9 +848,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
struct request *postponed_rq = tape->postponed_rq;
u8 stat;

- debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld,"
- " current_nr_sectors: %d\n",
- rq->sector, rq->nr_sectors, rq->current_nr_sectors);
+ debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu,"
+ " current_nr_sectors: %u\n",
+ (unsigned long long)rq->sector, rq->nr_sectors,
+ rq->current_nr_sectors);

if (!blk_special_request(rq)) {
/* We do not support buffer cache originated requests. */
@@ -1021,7 +892,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
}

if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
- (stat & SEEK_STAT) == 0) {
+ (stat & ATA_DSC) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
tape->dsc_poll_freq = tape->best_dsc_rw_freq;
@@ -1043,12 +914,12 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
return ide_stopped;
}
if (rq->cmd[13] & REQ_IDETAPE_READ) {
- pc = idetape_next_pc_storage(drive);
+ pc = &tape->queued_pc;
ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
goto out;
}
if (rq->cmd[13] & REQ_IDETAPE_WRITE) {
- pc = idetape_next_pc_storage(drive);
+ pc = &tape->queued_pc;
ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6);
goto out;
}
@@ -1235,77 +1106,30 @@ static void idetape_init_merge_buffer(idetape_tape_t *tape)
static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, int write_filemark)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = WRITE_FILEMARKS;
pc->c[4] = write_filemark;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}

-static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
-{
- idetape_init_pc(pc);
- pc->c[0] = TEST_UNIT_READY;
-}
-
-/*
- * We add a special packet command request to the tail of the request queue, and
- * wait for it to be serviced. This is not to be called from within the request
- * handling part of the driver! We allocate here data on the stack and it is
- * valid until the request is finished. This is not the case for the bottom part
- * of the driver, where we are always leaving the functions to wait for an
- * interrupt or a timer event.
- *
- * From the bottom part of the driver, we should allocate safe memory using
- * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request
- * to the request list without waiting for it to be serviced! In that case, we
- * usually use idetape_queue_pc_head().
- */
-static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct request *rq;
- int error;
-
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd[13] = REQ_IDETAPE_PC1;
- rq->buffer = (char *)pc;
- memcpy(rq->cmd, pc->c, 12);
- error = blk_execute_rq(drive->queue, tape->disk, rq, 0);
- blk_put_request(rq);
- return error;
-}
-
-static void idetape_create_load_unload_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, int cmd)
-{
- idetape_init_pc(pc);
- pc->c[0] = START_STOP;
- pc->c[4] = cmd;
- pc->flags |= PC_FLAG_WAIT_FOR_DSC;
-}
-
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
{
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc pc;
+ struct gendisk *disk = tape->disk;
int load_attempted = 0;

/* Wait for the tape to become ready */
set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
timeout += jiffies;
while (time_before(jiffies, timeout)) {
- idetape_create_test_unit_ready_cmd(&pc);
- if (!idetape_queue_pc_tail(drive, &pc))
+ if (ide_do_test_unit_ready(drive, disk) == 0)
return 0;
if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
|| (tape->asc == 0x3A)) {
/* no media */
if (load_attempted)
return -ENOMEDIUM;
- idetape_create_load_unload_cmd(drive, &pc,
- IDETAPE_LU_LOAD_MASK);
- idetape_queue_pc_tail(drive, &pc);
+ ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
load_attempted = 1;
/* not about to be ready */
} else if (!(tape->sense_key == 2 && tape->asc == 4 &&
@@ -1318,11 +1142,12 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)

static int idetape_flush_tape_buffers(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
struct ide_atapi_pc pc;
int rc;

idetape_create_write_filemark_cmd(drive, &pc, 0);
- rc = idetape_queue_pc_tail(drive, &pc);
+ rc = ide_queue_pc_tail(drive, tape->disk, &pc);
if (rc)
return rc;
idetape_wait_ready(drive, 60 * 5 * HZ);
@@ -1331,7 +1156,7 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive)

static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = READ_POSITION;
pc->req_xfer = 20;
}
@@ -1345,7 +1170,7 @@ static int idetape_read_position(ide_drive_t *drive)
debug_log(DBG_PROCS, "Enter %s\n", __func__);

idetape_create_read_position_cmd(&pc);
- if (idetape_queue_pc_tail(drive, &pc))
+ if (ide_queue_pc_tail(drive, tape->disk, &pc))
return -1;
position = tape->first_frame;
return position;
@@ -1355,7 +1180,7 @@ static void idetape_create_locate_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc,
unsigned int block, u8 partition, int skip)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = POSITION_TO_ELEMENT;
pc->c[1] = 2;
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
@@ -1363,21 +1188,6 @@ static void idetape_create_locate_cmd(ide_drive_t *drive,
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}

-static int idetape_create_prevent_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, int prevent)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- /* device supports locking according to capabilities page */
- if (!(tape->caps[6] & 0x01))
- return 0;
-
- idetape_init_pc(pc);
- pc->c[0] = ALLOW_MEDIUM_REMOVAL;
- pc->c[4] = prevent;
- return 1;
-}
-
static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
@@ -1405,6 +1215,7 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
u8 partition, int skip)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
int retval;
struct ide_atapi_pc pc;

@@ -1412,12 +1223,12 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
__ide_tape_discard_merge_buffer(drive);
idetape_wait_ready(drive, 60 * 5 * HZ);
idetape_create_locate_cmd(drive, &pc, block, partition, skip);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return (retval);

idetape_create_read_position_cmd(&pc);
- return (idetape_queue_pc_tail(drive, &pc));
+ return ide_queue_pc_tail(drive, disk, &pc);
}

static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
@@ -1477,7 +1288,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,

static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = INQUIRY;
pc->c[4] = 254;
pc->req_xfer = 254;
@@ -1486,14 +1297,14 @@ static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
static void idetape_create_rewind_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = REZERO_UNIT;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}

static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = ERASE;
pc->c[1] = 1;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
@@ -1501,7 +1312,7 @@ static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)

static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = SPACE;
put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
pc->c[1] = cmd;
@@ -1664,20 +1475,20 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
*/
static int idetape_rewind_tape(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
int retval;
struct ide_atapi_pc pc;
- idetape_tape_t *tape;
- tape = drive->driver_data;

debug_log(DBG_SENSE, "Enter %s\n", __func__);

idetape_create_rewind_cmd(drive, &pc);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return retval;

idetape_create_read_position_cmd(&pc);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return retval;
return 0;
@@ -1720,6 +1531,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
struct ide_atapi_pc pc;
int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);
@@ -1744,7 +1556,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
case MTBSF:
idetape_create_space_cmd(&pc, mt_count - count,
IDETAPE_SPACE_OVER_FILEMARK);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTFSFM:
case MTBSFM:
if (!sprev)
@@ -1933,11 +1745,12 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,

static int idetape_write_filemark(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
struct ide_atapi_pc pc;

/* Write a filemark */
idetape_create_write_filemark_cmd(drive, &pc, 1);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
return -EIO;
}
@@ -1960,6 +1773,7 @@ static int idetape_write_filemark(ide_drive_t *drive)
static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
struct ide_atapi_pc pc;
int i, retval;

@@ -1996,9 +1810,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
return 0;
case MTLOAD:
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
- IDETAPE_LU_LOAD_MASK);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
case MTUNLOAD:
case MTOFFL:
/*
@@ -2006,14 +1818,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
* attempting to eject.
*/
if (tape->door_locked) {
- if (idetape_create_prevent_cmd(drive, &pc, 0))
- if (!idetape_queue_pc_tail(drive, &pc))
- tape->door_locked = DOOR_UNLOCKED;
+ if (!ide_set_media_lock(drive, disk, 0))
+ tape->door_locked = DOOR_UNLOCKED;
}
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
- !IDETAPE_LU_LOAD_MASK);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
if (!retval)
clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
return retval;
@@ -2022,16 +1831,15 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
return idetape_flush_tape_buffers(drive);
case MTRETEN:
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
+ return ide_do_start_stop(drive, disk,
IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
- return idetape_queue_pc_tail(drive, &pc);
case MTEOM:
idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTERASE:
(void)idetape_rewind_tape(drive);
idetape_create_erase_cmd(&pc);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTSETBLK:
if (mt_count) {
if (mt_count < tape->blk_size ||
@@ -2052,17 +1860,13 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
case MTFSR:
case MTBSR:
case MTLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 1))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_set_media_lock(drive, disk, 1);
if (retval)
return retval;
tape->door_locked = DOOR_EXPLICITLY_LOCKED;
return 0;
case MTUNLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 0))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_set_media_lock(drive, disk, 0);
if (retval)
return retval;
tape->door_locked = DOOR_UNLOCKED;
@@ -2144,7 +1948,7 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
struct ide_atapi_pc pc;

idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
if (tape->blk_size == 0) {
printk(KERN_WARNING "ide-tape: Cannot deal with zero "
@@ -2164,7 +1968,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
unsigned int minor = iminor(inode), i = minor & ~0xc0;
ide_drive_t *drive;
idetape_tape_t *tape;
- struct ide_atapi_pc pc;
int retval;

if (i >= MAX_HWIFS * MAX_DRIVES)
@@ -2227,11 +2030,9 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)

/* Lock the tape drive door so user can't eject. */
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
- if (idetape_create_prevent_cmd(drive, &pc, 1)) {
- if (!idetape_queue_pc_tail(drive, &pc)) {
- if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
- tape->door_locked = DOOR_LOCKED;
- }
+ if (!ide_set_media_lock(drive, tape->disk, 1)) {
+ if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
+ tape->door_locked = DOOR_LOCKED;
}
}
unlock_kernel();
@@ -2264,7 +2065,6 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
{
struct ide_tape_obj *tape = ide_tape_f(filp);
ide_drive_t *drive = tape->drive;
- struct ide_atapi_pc pc;
unsigned int minor = iminor(inode);

lock_kernel();
@@ -2283,10 +2083,8 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
(void) idetape_rewind_tape(drive);
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
- if (idetape_create_prevent_cmd(drive, &pc, 0)) {
- if (!idetape_queue_pc_tail(drive, &pc))
- tape->door_locked = DOOR_UNLOCKED;
- }
+ if (!ide_set_media_lock(drive, tape->disk, 0))
+ tape->door_locked = DOOR_UNLOCKED;
}
}
clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
@@ -2295,45 +2093,6 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
return 0;
}

-/*
- * check the contents of the ATAPI IDENTIFY command results. We return:
- *
- * 1 - If the tape can be supported by us, based on the information we have so
- * far.
- *
- * 0 - If this tape driver is not currently supported by us.
- */
-static int idetape_identify_device(ide_drive_t *drive)
-{
- u8 gcw[2], protocol, device_type, removable, packet_size;
-
- if (drive->id_read == 0)
- return 1;
-
- *((unsigned short *) &gcw) = drive->id->config;
-
- protocol = (gcw[1] & 0xC0) >> 6;
- device_type = gcw[1] & 0x1F;
- removable = !!(gcw[0] & 0x80);
- packet_size = gcw[0] & 0x3;
-
- /* Check that we can support this device */
- if (protocol != 2)
- printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
- protocol);
- else if (device_type != 1)
- printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
- "to tape\n", device_type);
- else if (!removable)
- printk(KERN_ERR "ide-tape: The removable flag is not set\n");
- else if (packet_size != 0) {
- printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12"
- " bytes\n", packet_size);
- } else
- return 1;
- return 0;
-}
-
static void idetape_get_inquiry_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
@@ -2341,7 +2100,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
char fw_rev[4], vendor_id[8], product_id[16];

idetape_create_inquiry_cmd(&pc);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
tape->name);
return;
@@ -2370,7 +2129,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
u8 speed, max_speed;

idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
" some default values\n");
tape->blk_size = 512;
@@ -2402,6 +2161,11 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
}

memcpy(&tape->caps, caps, 20);
+
+ /* device lacks locking support according to capabilities page */
+ if ((caps[6] & 1) == 0)
+ drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+
if (caps[7] & 0x02)
tape->blk_size = 512;
else if (caps[7] & 0x04)
@@ -2409,28 +2173,56 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
}

#ifdef CONFIG_IDE_PROC_FS
-static void idetape_add_settings(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
- 1, 2, (u16 *)&tape->caps[16], NULL);
- ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
- 1, 1, (u16 *)&tape->caps[14], NULL);
- ide_add_setting(drive, "buffer_size", SETTING_READ, TYPE_INT, 0, 0xffff,
- 1, 1024, &tape->buffer_size, NULL);
- ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
- IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
- NULL);
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1,
- 1, &drive->dsc_overlap, NULL);
- ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
- 1, 1, &tape->avg_speed, NULL);
- ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
- 1, &tape->debug_mask, NULL);
-}
-#else
-static inline void idetape_add_settings(ide_drive_t *drive) { ; }
+#define ide_tape_devset_get(name, field) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ idetape_tape_t *tape = drive->driver_data; \
+ return tape->field; \
+}
+
+#define ide_tape_devset_set(name, field) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ idetape_tape_t *tape = drive->driver_data; \
+ tape->field = arg; \
+ return 0; \
+}
+
+#define ide_tape_devset_rw_field(_name, _field) \
+ide_tape_devset_get(_name, _field) \
+ide_tape_devset_set(_name, _field) \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
+
+#define ide_tape_devset_r_field(_name, _field) \
+ide_tape_devset_get(_name, _field) \
+IDE_DEVSET(_name, 0, get_##_name, NULL)
+
+static int mulf_tdsc(ide_drive_t *drive) { return 1000; }
+static int divf_tdsc(ide_drive_t *drive) { return HZ; }
+static int divf_buffer(ide_drive_t *drive) { return 2; }
+static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
+
+ide_devset_rw_field(dsc_overlap, dsc_overlap);
+
+ide_tape_devset_rw_field(debug_mask, debug_mask);
+ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
+
+ide_tape_devset_r_field(avg_speed, avg_speed);
+ide_tape_devset_r_field(speed, caps[14]);
+ide_tape_devset_r_field(buffer, caps[16]);
+ide_tape_devset_r_field(buffer_size, buffer_size);
+
+static const struct ide_proc_devset idetape_settings[] = {
+ __IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer),
+ __IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size),
+ __IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL),
+ __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
+ mulf_tdsc, divf_tdsc),
+ { 0 },
+};
#endif

/*
@@ -2462,15 +2254,15 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
drive->dsc_overlap = 0;
}
/* Seagate Travan drives do not support DSC overlap. */
- if (strstr(drive->id->model, "Seagate STT3401"))
+ if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
drive->dsc_overlap = 0;
tape->minor = minor;
tape->name[0] = 'h';
tape->name[1] = 't';
tape->name[2] = '0' + minor;
tape->chrdev_dir = IDETAPE_DIR_NONE;
- tape->pc = tape->pc_stack;
- *((unsigned short *) &gcw) = drive->id->config;
+
+ *((u16 *)&gcw) = drive->id[ATA_ID_CONFIG];

/* Command packet DRQ type */
if (((gcw[0] & 0x60) >> 5) == 1)
@@ -2512,7 +2304,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
tape->best_dsc_rw_freq * 1000 / HZ,
drive->using_dma ? ", DMA":"");

- idetape_add_settings(drive);
+ ide_proc_register_driver(drive, tape->driver);
}

static void ide_tape_remove(ide_drive_t *drive)
@@ -2577,12 +2369,12 @@ static ide_driver_t idetape_driver = {
.remove = ide_tape_remove,
.version = IDETAPE_VERSION,
.media = ide_tape,
- .supports_dsc_overlap = 1,
.do_request = idetape_do_request,
.end_request = idetape_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idetape_proc,
+ .settings = idetape_settings,
#endif
};

@@ -2645,11 +2437,11 @@ static int ide_tape_probe(ide_drive_t *drive)

if (!strstr("ide-tape", drive->driver_req))
goto failed;
- if (!drive->present)
- goto failed;
+
if (drive->media != ide_tape)
goto failed;
- if (!idetape_identify_device(drive)) {
+
+ if (drive->id_read == 1 && !ide_check_atapi_device(drive, DRV_NAME)) {
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
" the driver\n", drive->name);
goto failed;
@@ -2667,8 +2459,6 @@ static int ide_tape_probe(ide_drive_t *drive)

ide_init_disk(g, drive);

- ide_proc_register_driver(drive, &idetape_driver);
-
kref_init(&tape->kref);

tape->drive = drive;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 7fb6f1c..487b18b 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -44,9 +44,9 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf)
memset(&args, 0, sizeof(ide_task_t));
args.tf.nsect = 0x01;
if (drive->media == ide_disk)
- args.tf.command = WIN_IDENTIFY;
+ args.tf.command = ATA_CMD_ID_ATA;
else
- args.tf.command = WIN_PIDENTIFY;
+ args.tf.command = ATA_CMD_ID_ATAPI;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
args.data_phase = TASKFILE_IN;
return ide_raw_taskfile(drive, &args, buf, 1);
@@ -99,12 +99,17 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
case TASKFILE_NO_DATA:
if (handler == NULL)
handler = task_no_data_intr;
- /* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */
if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) {
switch (tf->command) {
- case WIN_SPECIFY: handler = set_geometry_intr; break;
- case WIN_RESTORE: handler = recal_intr; break;
- case WIN_SETMULT: handler = set_multmode_intr; break;
+ case ATA_CMD_INIT_DEV_PARAMS:
+ handler = set_geometry_intr;
+ break;
+ case ATA_CMD_RESTORE:
+ handler = recal_intr;
+ break;
+ case ATA_CMD_SET_MULTI:
+ handler = set_multmode_intr;
+ break;
}
}
ide_execute_command(drive, tf->command, handler,
@@ -121,7 +126,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
EXPORT_SYMBOL_GPL(do_rw_taskfile);

/*
- * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd.
+ * set_multmode_intr() is invoked on completion of a ATA_CMD_SET_MULTI cmd.
*/
static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
{
@@ -131,7 +136,7 @@ static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);

- if (OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
drive->mult_count = drive->mult_req;
else {
drive->mult_req = drive->mult_count = 0;
@@ -142,7 +147,7 @@ static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
}

/*
- * set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd.
+ * set_geometry_intr() is invoked on completion of a ATA_CMD_INIT_DEV_PARAMS cmd.
*/
static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
{
@@ -154,15 +159,15 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)

while (1) {
stat = hwif->tp_ops->read_status(hwif);
- if ((stat & BUSY_STAT) == 0 || retries-- == 0)
+ if ((stat & ATA_BUSY) == 0 || retries-- == 0)
break;
udelay(10);
};

- if (OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_stopped;

- if (stat & (ERR_STAT|DRQ_STAT))
+ if (stat & (ATA_ERR | ATA_DRQ))
return ide_error(drive, "set_geometry_intr", stat);

ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL);
@@ -170,7 +175,7 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
}

/*
- * recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd.
+ * recal_intr() is invoked on completion of a ATA_CMD_RESTORE (recalibrate) cmd.
*/
static ide_startstop_t recal_intr(ide_drive_t *drive)
{
@@ -180,7 +185,7 @@ static ide_startstop_t recal_intr(ide_drive_t *drive)
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);

- if (!OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_error(drive, "recal_intr", stat);
return ide_stopped;
}
@@ -197,7 +202,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);

- if (!OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_error(drive, "task_no_data_intr", stat);
/* calls ide_end_drive_cmd */

@@ -220,13 +225,13 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
for (retries = 0; retries < 1000; retries++) {
stat = hwif->tp_ops->read_status(hwif);

- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
udelay(10);
else
break;
}

- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
printk(KERN_ERR "%s: drive still BUSY!\n", drive->name);

return stat;
@@ -385,7 +390,7 @@ void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat)
static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat)
{
/* Command all done? */
- if (OK_STAT(stat, READY_STAT, BUSY_STAT)) {
+ if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) {
task_end_request(drive, rq, stat);
return ide_stopped;
}
@@ -405,11 +410,11 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive)
u8 stat = hwif->tp_ops->read_status(hwif);

/* Error? */
- if (stat & ERR_STAT)
+ if (stat & ATA_ERR)
return task_error(drive, rq, __func__, stat);

/* Didn't want any data? Odd. */
- if (!(stat & DRQ_STAT))
+ if ((stat & ATA_DRQ) == 0)
return task_in_unexpected(drive, rq, stat);

ide_pio_datablock(drive, rq, 0);
@@ -442,7 +447,7 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive)
return task_error(drive, rq, __func__, stat);

/* Deal with unexpected ATA data phase. */
- if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft)
+ if (((stat & ATA_DRQ) == 0) ^ !hwif->nleft)
return task_error(drive, rq, __func__, stat);

if (!hwif->nleft) {
@@ -461,7 +466,7 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq)
{
ide_startstop_t startstop;

- if (ide_wait_stat(&startstop, drive, DRQ_STAT,
+ if (ide_wait_stat(&startstop, drive, ATA_DRQ,
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
drive->name,
@@ -721,110 +726,3 @@ abort:
return err;
}
#endif
-
-int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
-{
- u8 *buf = NULL;
- int bufsize = 0, err = 0;
- u8 args[4], xfer_rate = 0;
- ide_task_t tfargs;
- struct ide_taskfile *tf = &tfargs.tf;
- struct hd_driveid *id = drive->id;
-
- if (NULL == (void *) arg) {
- struct request *rq;
-
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
- err = blk_execute_rq(drive->queue, NULL, rq, 0);
- blk_put_request(rq);
-
- return err;
- }
-
- if (copy_from_user(args, (void __user *)arg, 4))
- return -EFAULT;
-
- memset(&tfargs, 0, sizeof(ide_task_t));
- tf->feature = args[2];
- if (args[0] == WIN_SMART) {
- tf->nsect = args[3];
- tf->lbal = args[1];
- tf->lbam = 0x4f;
- tf->lbah = 0xc2;
- tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT;
- } else {
- tf->nsect = args[1];
- tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE |
- IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT;
- }
- tf->command = args[0];
- tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA;
-
- if (args[3]) {
- tfargs.tf_flags |= IDE_TFLAG_IO_16BIT;
- bufsize = SECTOR_WORDS * 4 * args[3];
- buf = kzalloc(bufsize, GFP_KERNEL);
- if (buf == NULL)
- return -ENOMEM;
- }
-
- if (tf->command == WIN_SETFEATURES &&
- tf->feature == SETFEATURES_XFER &&
- tf->nsect >= XFER_SW_DMA_0 &&
- (id->dma_ultra || id->dma_mword || id->dma_1word)) {
- xfer_rate = args[1];
- if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) {
- printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
- "be set\n", drive->name);
- goto abort;
- }
- }
-
- err = ide_raw_taskfile(drive, &tfargs, buf, args[3]);
-
- args[0] = tf->status;
- args[1] = tf->error;
- args[2] = tf->nsect;
-
- if (!err && xfer_rate) {
- /* active-retuning-calls future */
- ide_set_xfer_rate(drive, xfer_rate);
- ide_driveid_update(drive);
- }
-abort:
- if (copy_to_user((void __user *)arg, &args, 4))
- err = -EFAULT;
- if (buf) {
- if (copy_to_user((void __user *)(arg + 4), buf, bufsize))
- err = -EFAULT;
- kfree(buf);
- }
- return err;
-}
-
-int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
-{
- void __user *p = (void __user *)arg;
- int err = 0;
- u8 args[7];
- ide_task_t task;
-
- if (copy_from_user(args, p, 7))
- return -EFAULT;
-
- memset(&task, 0, sizeof(task));
- memcpy(&task.tf_array[7], &args[1], 6);
- task.tf.command = args[0];
- task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
-
- err = ide_no_data_taskfile(drive, &task);
-
- args[0] = task.tf.command;
- memcpy(&args[1], &task.tf_array[7], 6);
-
- if (copy_to_user(p, args, 7))
- err = -EFAULT;
-
- return err;
-}
diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
index 8c2f832..81f527a 100644
--- a/drivers/ide/ide-timings.c
+++ b/drivers/ide/ide-timings.c
@@ -22,7 +22,6 @@
*/

#include
-#include
#include
#include

@@ -78,15 +77,15 @@ EXPORT_SYMBOL_GPL(ide_timing_find_mode);

u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
u16 cycle = 0;

- if (id->field_valid & 2) {
- if (id->capability & 8)
- cycle = id->eide_pio_iordy;
+ if (id[ATA_ID_FIELD_VALID] & 2) {
+ if (ata_id_has_iordy(drive->id))
+ cycle = id[ATA_ID_EIDE_PIO_IORDY];
else
- cycle = id->eide_pio;
+ cycle = id[ATA_ID_EIDE_PIO];

/* conservative "downgrade" for all pre-ATA2 drives */
if (pio < 3 && cycle < t->cycle)
@@ -138,7 +137,7 @@ EXPORT_SYMBOL_GPL(ide_timing_merge);
int ide_timing_compute(ide_drive_t *drive, u8 speed,
struct ide_timing *t, int T, int UT)
{
- struct hd_driveid *id = drive->id;
+ u16 *id = drive->id;
struct ide_timing *s, p;

/*
@@ -157,16 +156,15 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed,
* If the drive is an EIDE drive, it can tell us it needs extended
* PIO/MWDMA cycle timing.
*/
- if (id && id->field_valid & 2) { /* EIDE drive */
-
+ if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));

if (speed <= XFER_PIO_2)
- p.cycle = p.cyc8b = id->eide_pio;
+ p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
else if (speed <= XFER_PIO_5)
- p.cycle = p.cyc8b = id->eide_pio_iordy;
+ p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
- p.cycle = id->eide_dma_min;
+ p.cycle = id[ATA_ID_EIDE_DMA_MIN];

ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
}
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 7724516..9dcf5ae 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -44,8 +44,6 @@
* inspiration from lots of linux users, esp. hamish@zot.apana.org.au
*/

-#define _IDE_C /* Tell ide.h it's really us */
-
#include
#include
#include
@@ -58,6 +56,7 @@
#include
#include
#include
+#include
#include
#include

@@ -97,8 +96,6 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
hwif->name[2] = 'e';
hwif->name[3] = '0' + index;

- hwif->bus_state = BUSSTATE_ON;
-
init_completion(&hwif->gendev_rel_comp);

hwif->tp_ops = &default_tp_ops;
@@ -119,7 +116,7 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif)
drive->media = ide_disk;
drive->select.all = (unit<<4)|0xa0;
drive->hwif = hwif;
- drive->ready_stat = READY_STAT;
+ drive->ready_stat = ATA_DRDY;
drive->bad_wstat = BAD_W_STAT;
drive->special.b.recalibrate = 1;
drive->special.b.set_geometry = 1;
@@ -253,42 +250,9 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)

DEFINE_MUTEX(ide_setting_mtx);

-EXPORT_SYMBOL_GPL(ide_setting_mtx);
-
-/**
- * ide_spin_wait_hwgroup - wait for group
- * @drive: drive in the group
- *
- * Wait for an IDE device group to go non busy and then return
- * holding the ide_lock which guards the hwgroup->busy status
- * and right to use it.
- */
+ide_devset_get(io_32bit, io_32bit);

-int ide_spin_wait_hwgroup (ide_drive_t *drive)
-{
- ide_hwgroup_t *hwgroup = HWGROUP(drive);
- unsigned long timeout = jiffies + (3 * HZ);
-
- spin_lock_irq(&ide_lock);
-
- while (hwgroup->busy) {
- unsigned long lflags;
- spin_unlock_irq(&ide_lock);
- local_irq_set(lflags);
- if (time_after(jiffies, timeout)) {
- local_irq_restore(lflags);
- printk(KERN_ERR "%s: channel busy\n", drive->name);
- return -EBUSY;
- }
- local_irq_restore(lflags);
- spin_lock_irq(&ide_lock);
- }
- return 0;
-}
-
-EXPORT_SYMBOL(ide_spin_wait_hwgroup);
-
-int set_io_32bit(ide_drive_t *drive, int arg)
+static int set_io_32bit(ide_drive_t *drive, int arg)
{
if (drive->no_io_32bit)
return -EPERM;
@@ -296,53 +260,39 @@ int set_io_32bit(ide_drive_t *drive, int arg)
if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
return -EINVAL;

- if (ide_spin_wait_hwgroup(drive))
- return -EBUSY;
-
drive->io_32bit = arg;

- spin_unlock_irq(&ide_lock);
-
return 0;
}

+ide_devset_get(ksettings, keep_settings);
+
static int set_ksettings(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;

- if (ide_spin_wait_hwgroup(drive))
- return -EBUSY;
drive->keep_settings = arg;
- spin_unlock_irq(&ide_lock);

return 0;
}

-int set_using_dma(ide_drive_t *drive, int arg)
+ide_devset_get(using_dma, using_dma);
+
+static int set_using_dma(ide_drive_t *drive, int arg)
{
#ifdef CONFIG_BLK_DEV_IDEDMA
- ide_hwif_t *hwif = drive->hwif;
int err = -EPERM;

if (arg < 0 || arg > 1)
return -EINVAL;

- if (!drive->id || !(drive->id->capability & 1))
+ if (ata_id_has_dma(drive->id) == 0)
goto out;

- if (hwif->dma_ops == NULL)
+ if (drive->hwif->dma_ops == NULL)
goto out;

- err = -EBUSY;
- if (ide_spin_wait_hwgroup(drive))
- goto out;
- /*
- * set ->busy flag, unlock and let it ride
- */
- hwif->hwgroup->busy = 1;
- spin_unlock_irq(&ide_lock);
-
err = 0;

if (arg) {
@@ -351,12 +301,6 @@ int set_using_dma(ide_drive_t *drive, int arg)
} else
ide_dma_off(drive);

- /*
- * lock, clear ->busy flag and unlock before leaving
- */
- spin_lock_irq(&ide_lock);
- hwif->hwgroup->busy = 0;
- spin_unlock_irq(&ide_lock);
out:
return err;
#else
@@ -367,7 +311,7 @@ out:
#endif
}

-int set_pio_mode(ide_drive_t *drive, int arg)
+static int set_pio_mode(ide_drive_t *drive, int arg)
{
struct request *rq;
ide_hwif_t *hwif = drive->hwif;
@@ -395,6 +339,8 @@ int set_pio_mode(ide_drive_t *drive, int arg)
return 0;
}

+ide_devset_get(unmaskirq, unmask);
+
static int set_unmaskirq(ide_drive_t *drive, int arg)
{
if (drive->no_unmask)
@@ -403,14 +349,20 @@ static int set_unmaskirq(ide_drive_t *drive, int arg)
if (arg < 0 || arg > 1)
return -EINVAL;

- if (ide_spin_wait_hwgroup(drive))
- return -EBUSY;
drive->unmask = arg;
- spin_unlock_irq(&ide_lock);

return 0;
}

+#define ide_gen_devset_rw(_name, _func) \
+__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
+
+ide_gen_devset_rw(io_32bit, io_32bit);
+ide_gen_devset_rw(keepsettings, ksettings);
+ide_gen_devset_rw(unmaskirq, unmaskirq);
+ide_gen_devset_rw(using_dma, using_dma);
+__IDE_DEVSET(pio_mode, 0, NULL, set_pio_mode);
+
static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
ide_drive_t *drive = dev->driver_data;
@@ -486,138 +438,6 @@ static int generic_ide_resume(struct device *dev)
return err;
}

-static int generic_drive_reset(ide_drive_t *drive)
-{
- struct request *rq;
- int ret = 0;
-
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd_len = 1;
- rq->cmd[0] = REQ_DRIVE_RESET;
- rq->cmd_flags |= REQ_SOFTBARRIER;
- if (blk_execute_rq(drive->queue, NULL, rq, 1))
- ret = rq->errors;
- blk_put_request(rq);
- return ret;
-}
-
-int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
- unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- ide_driver_t *drv;
- void __user *p = (void __user *)arg;
- int err = 0, (*setfunc)(ide_drive_t *, int);
- u8 *val;
-
- switch (cmd) {
- case HDIO_GET_32BIT: val = &drive->io_32bit; goto read_val;
- case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val;
- case HDIO_GET_UNMASKINTR: val = &drive->unmask; goto read_val;
- case HDIO_GET_DMA: val = &drive->using_dma; goto read_val;
- case HDIO_SET_32BIT: setfunc = set_io_32bit; goto set_val;
- case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings; goto set_val;
- case HDIO_SET_PIO_MODE: setfunc = set_pio_mode; goto set_val;
- case HDIO_SET_UNMASKINTR: setfunc = set_unmaskirq; goto set_val;
- case HDIO_SET_DMA: setfunc = set_using_dma; goto set_val;
- }
-
- switch (cmd) {
- case HDIO_OBSOLETE_IDENTITY:
- case HDIO_GET_IDENTITY:
- if (bdev != bdev->bd_contains)
- return -EINVAL;
- if (drive->id_read == 0)
- return -ENOMSG;
- if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
- return -EFAULT;
- return 0;
-
- case HDIO_GET_NICE:
- return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP |
- drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP |
- drive->nice1 << IDE_NICE_1,
- (long __user *) arg);
-#ifdef CONFIG_IDE_TASK_IOCTL
- case HDIO_DRIVE_TASKFILE:
- if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
- return -EACCES;
- switch(drive->media) {
- case ide_disk:
- return ide_taskfile_ioctl(drive, cmd, arg);
- default:
- return -ENOMSG;
- }
-#endif /* CONFIG_IDE_TASK_IOCTL */
-
- case HDIO_DRIVE_CMD:
- if (!capable(CAP_SYS_RAWIO))
- return -EACCES;
- return ide_cmd_ioctl(drive, cmd, arg);
-
- case HDIO_DRIVE_TASK:
- if (!capable(CAP_SYS_RAWIO))
- return -EACCES;
- return ide_task_ioctl(drive, cmd, arg);
- case HDIO_SET_NICE:
- if (!capable(CAP_SYS_ADMIN)) return -EACCES;
- if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
- return -EPERM;
- drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
- drv = *(ide_driver_t **)bdev->bd_disk->private_data;
- if (drive->dsc_overlap && !drv->supports_dsc_overlap) {
- drive->dsc_overlap = 0;
- return -EPERM;
- }
- drive->nice1 = (arg >> IDE_NICE_1) & 1;
- return 0;
- case HDIO_DRIVE_RESET:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
-
- return generic_drive_reset(drive);
-
- case HDIO_GET_BUSSTATE:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- if (put_user(HWIF(drive)->bus_state, (long __user *)arg))
- return -EFAULT;
- return 0;
-
- case HDIO_SET_BUSSTATE:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- return -EOPNOTSUPP;
- default:
- return -EINVAL;
- }
-
-read_val:
- mutex_lock(&ide_setting_mtx);
- spin_lock_irqsave(&ide_lock, flags);
- err = *val;
- spin_unlock_irqrestore(&ide_lock, flags);
- mutex_unlock(&ide_setting_mtx);
- return err >= 0 ? put_user(err, (long __user *)arg) : err;
-
-set_val:
- if (bdev != bdev->bd_contains)
- err = -EINVAL;
- else {
- if (!capable(CAP_SYS_ADMIN))
- err = -EACCES;
- else {
- mutex_lock(&ide_setting_mtx);
- err = setfunc(drive, arg);
- mutex_unlock(&ide_setting_mtx);
- }
- }
- return err;
-}
-
-EXPORT_SYMBOL(generic_ide_ioctl);
-
/**
* ide_device_get - get an additional reference to a ide_drive_t
* @drive: device to get a reference to
@@ -710,21 +530,21 @@ static ssize_t model_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", drive->id->model);
+ return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]);
}

static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", drive->id->fw_rev);
+ return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]);
}

static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", drive->id->serial_no);
+ return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]);
}

static struct device_attribute ide_dev_attrs[] = {
@@ -841,7 +661,7 @@ MODULE_PARM_DESC(noprobe, "skip probing for a device");
static unsigned int ide_nowerr;

module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0);
-MODULE_PARM_DESC(nowerr, "ignore the WRERR_STAT bit for a device");
+MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device");

static unsigned int ide_cdroms;

@@ -906,7 +726,7 @@ static void ide_dev_apply_params(ide_drive_t *drive)
drive->noprobe = 1;
}
if (ide_nowerr & (1 << i)) {
- printk(KERN_INFO "ide: ignoring the WRERR_STAT bit for %s\n",
+ printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
drive->name);
drive->bad_wstat = BAD_R_STAT;
}
@@ -927,7 +747,7 @@ static void ide_dev_apply_params(ide_drive_t *drive)
drive->cyl, drive->head, drive->sect);
drive->present = 1;
drive->media = ide_disk;
- drive->ready_stat = READY_STAT;
+ drive->ready_stat = ATA_DRDY;
}
}

diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 4ec1973..7276c96 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -43,7 +43,6 @@
#include
#include
#include
-#include
#include
#include

diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 7c2afa9..c5a3c9e 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -20,7 +20,6 @@
#include
#include
#include
-#include
#include
#include
#include
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index af791a0..689b2e4 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -10,7 +10,6 @@
#include
#include
#include
-#include
#include
#include

diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 724f950..39d500d 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -13,7 +13,6 @@
#include
#include
#include
-#include
#include
#include

diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index 51ba085..6915068 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -12,7 +12,6 @@
#include
#include
#include
-#include
#include
#include
#include
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 98f7c95..5123ea2 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -24,7 +24,6 @@
#include
#include
#include
-#include
#include
#include

diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 21bfac1..ee6fc30 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -38,7 +38,6 @@
#include
#include
#include
-#include
#include
#include
#include
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index a0bb167..43f97cc 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -15,7 +15,6 @@
#include
#include
#include
-#include
#include
#include

diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 4abd8fc..4af4a8c 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -14,8 +14,6 @@
#include
#include
#include
-#include
-
#include

/*
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 2338f34..ec408b3 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -27,7 +27,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -151,12 +150,14 @@ static int qd_find_disk_type (ide_drive_t *drive,
int *active_time, int *recovery_time)
{
struct qd65xx_timing_s *p;
- char model[40];
+ char *m = (char *)&drive->id[ATA_ID_PROD];
+ char model[ATA_ID_PROD_LEN];

- if (!*drive->id->model) return 0;
+ if (*m == 0)
+ return 0;

- strncpy(model,drive->id->model,40);
- ide_fixstring(model,40,1); /* byte-swap */
+ strncpy(model, m, ATA_ID_PROD_LEN);
+ ide_fixstring(model, ATA_ID_PROD_LEN, 1); /* byte-swap */

for (p = qd65xx_timing ; p->offset != -1 ; p++) {
if (!strncmp(p->model, model+p->offset, 4)) {
@@ -185,20 +186,20 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing)

static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
+ u16 *id = drive->id;
int active_time = 175;
int recovery_time = 415; /* worst case values from the dos driver */

/*
* FIXME: use "pio" value
*/
- if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)
- && drive->id->tPIO && (drive->id->field_valid & 0x02)
- && drive->id->eide_pio >= 240) {
-
+ if (!qd_find_disk_type(drive, &active_time, &recovery_time) &&
+ (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) &&
+ id[ATA_ID_EIDE_PIO] >= 240) {
printk(KERN_INFO "%s: PIO mode%d\n", drive->name,
- drive->id->tPIO);
+ id[ATA_ID_OLD_PIO_MODES] & 0xff);
active_time = 110;
- recovery_time = drive->id->eide_pio - 120;
+ recovery_time = drive->id[ATA_ID_EIDE_PIO] - 120;
}

qd_set_timing(drive, qd6500_compute_timing(HWIF(drive), active_time, recovery_time));
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index b54a14a..1da076e 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -45,7 +45,6 @@
#include
#include
#include
-#include
#include
#include

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 3187215..e7475ba 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -7,7 +7,6 @@
#include
#include
#include
-#include
#include
#include

@@ -140,7 +139,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
}

-static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev)
+static unsigned int init_chipset_aec62xx(struct pci_dev *dev)
{
/* These are necessary to get AEC6280 Macintosh cards to work */
if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
@@ -308,6 +307,8 @@ static struct pci_driver driver = {
.id_table = aec62xx_pci_tbl,
.probe = aec62xx_init_one,
.remove = __devexit_p(aec62xx_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init aec62xx_ide_init(void)
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index d647526..053c752 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -31,7 +31,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -134,8 +133,8 @@ static u8 ali_udma_filter(ide_drive_t *drive)
if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
if (drive->media != ide_disk)
return 0;
- if (chip_is_1543c_e && strstr(drive->id->model, "WDC ") &&
- wdc_udma == 0)
+ if (wdc_udma == 0 && chip_is_1543c_e &&
+ strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
return 0;
}

@@ -214,7 +213,7 @@ static int ali15x3_dma_setup(ide_drive_t *drive)
* appropriate also sets up the 1533 southbridge.
*/

-static unsigned int __devinit init_chipset_ali15x3(struct pci_dev *dev)
+static unsigned int init_chipset_ali15x3(struct pci_dev *dev)
{
unsigned long flags;
u8 tmpbyte;
@@ -582,6 +581,8 @@ static struct pci_driver driver = {
.id_table = alim15x3_pci_tbl,
.probe = alim15x3_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init ali15x3_ide_init(void)
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 1e66a96..824471f 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -112,13 +112,13 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
amd_set_drive(drive, XFER_PIO_0 + pio);
}

-static void __devinit amd7409_cable_detect(struct pci_dev *dev)
+static void amd7409_cable_detect(struct pci_dev *dev)
{
/* no host side cable detection */
amd_80w = 0x03;
}

-static void __devinit amd7411_cable_detect(struct pci_dev *dev)
+static void amd7411_cable_detect(struct pci_dev *dev)
{
int i;
u32 u = 0;
@@ -140,7 +140,7 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev)
* The initialization callback. Initialize drive independent registers.
*/

-static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev)
+static unsigned int init_chipset_amd74xx(struct pci_dev *dev)
{
u8 t = 0, offset = amd_offset(dev);

@@ -324,6 +324,8 @@ static struct pci_driver driver = {
.id_table = amd74xx_pci_tbl,
.probe = amd74xx_probe,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init amd74xx_ide_init(void)
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 41f6cb6..e443703 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -7,7 +7,6 @@
#include
#include
#include
-#include
#include
#include

@@ -188,6 +187,8 @@ static struct pci_driver driver = {
.id_table = atiixp_pci_tbl,
.probe = atiixp_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init atiixp_ide_init(void)
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index e6c6200..7f39cdb 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -103,7 +103,6 @@
#include
#include
#include
-#include
#include
#include

@@ -375,6 +374,21 @@ static void cmd640_dump_regs(void)
}
#endif

+static void __set_prefetch_mode(ide_drive_t *drive, int mode)
+{
+ if (mode) { /* want prefetch on? */
+#if CMD640_PREFETCH_MASKS
+ drive->no_unmask = 1;
+ drive->unmask = 0;
+#endif
+ drive->no_io_32bit = 0;
+ } else {
+ drive->no_unmask = 0;
+ drive->no_io_32bit = 1;
+ drive->io_32bit = 0;
+ }
+}
+
#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED
/*
* Check whether prefetch is on for a drive,
@@ -384,19 +398,10 @@ static void __init check_prefetch(ide_drive_t *drive, unsigned int index)
{
u8 b = get_cmd640_reg(prefetch_regs[index]);

- if (b & prefetch_masks[index]) { /* is prefetch off? */
- drive->no_unmask = 0;
- drive->no_io_32bit = 1;
- drive->io_32bit = 0;
- } else {
-#if CMD640_PREFETCH_MASKS
- drive->no_unmask = 1;
- drive->unmask = 0;
-#endif
- drive->no_io_32bit = 0;
- }
+ __set_prefetch_mode(drive, (b & prefetch_masks[index]) ? 0 : 1);
}
#else
+
/*
* Sets prefetch mode for a drive.
*/
@@ -408,19 +413,11 @@ static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode)

spin_lock_irqsave(&cmd640_lock, flags);
b = __get_cmd640_reg(reg);
- if (mode) { /* want prefetch on? */
-#if CMD640_PREFETCH_MASKS
- drive->no_unmask = 1;
- drive->unmask = 0;
-#endif
- drive->no_io_32bit = 0;
+ __set_prefetch_mode(drive, mode);
+ if (mode)
b &= ~prefetch_masks[index]; /* enable prefetch */
- } else {
- drive->no_unmask = 0;
- drive->no_io_32bit = 1;
- drive->io_32bit = 0;
+ else
b |= prefetch_masks[index]; /* disable prefetch */
- }
__put_cmd640_reg(reg, b);
spin_unlock_irqrestore(&cmd640_lock, flags);
}
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index e064398..456dee1 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -13,7 +13,6 @@
#include
#include
#include
-#include
#include
#include

@@ -332,7 +331,7 @@ static int cmd646_1_dma_end(ide_drive_t *drive)
return (dma_stat & 7) != 4;
}

-static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev)
+static unsigned int init_chipset_cmd64x(struct pci_dev *dev)
{
u8 mrdmode = 0;

@@ -511,6 +510,8 @@ static struct pci_driver driver = {
.id_table = cmd64x_pci_tbl,
.probe = cmd64x_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init cmd64x_ide_init(void)
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 151844f..d6341f7 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -35,7 +35,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -150,6 +149,8 @@ static struct pci_driver driver = {
.name = "Cyrix_IDE",
.id_table = cs5520_pci_tbl,
.probe = cs5520_init_one,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init cs5520_ide_init(void)
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index f235db8..da42fa7 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -15,7 +15,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -81,17 +80,19 @@ static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
static u8 cs5530_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
- struct hd_driveid *mateid = mate->id;
+ ide_drive_t *mate = ide_get_pair_dev(drive);
+ u16 *mateid = mate->id;
u8 mask = hwif->ultra_mask;

- if (mate->present == 0)
+ if (mate == NULL)
goto out;

- if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
- if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+ if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
+ if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
+ (mateid[ATA_ID_UDMA_MODES] & 7))
goto out;
- if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+ if ((mateid[ATA_ID_FIELD_VALID] & 2) &&
+ (mateid[ATA_ID_MWDMA_MODES] & 7))
mask = 0;
}
out:
@@ -133,7 +134,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
* Initialize the cs5530 bridge for reliable IDE DMA operation.
*/

-static unsigned int __devinit init_chipset_cs5530(struct pci_dev *dev)
+static unsigned int init_chipset_cs5530(struct pci_dev *dev)
{
struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;

@@ -271,6 +272,8 @@ static struct pci_driver driver = {
.id_table = cs5530_pci_tbl,
.probe = cs5530_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init cs5530_ide_init(void)
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index dd3dc23..1e5bc59 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -80,12 +80,12 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)

/* Set the PIO timings */
if (speed < XFER_SW_DMA_0) {
- ide_drive_t *pair = ide_get_paired_drive(drive);
+ ide_drive_t *pair = ide_get_pair_dev(drive);
u8 cmd, pioa;

cmd = pioa = speed - XFER_PIO_0;

- if (pair->present) {
+ if (pair) {
u8 piob = ide_get_best_pio_mode(pair, 255, 4);

if (piob < cmd)
@@ -193,10 +193,12 @@ static const struct pci_device_id cs5535_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);

static struct pci_driver driver = {
- .name = "CS5535_IDE",
- .id_table = cs5535_pci_tbl,
- .probe = cs5535_init_one,
- .remove = ide_pci_remove,
+ .name = "CS5535_IDE",
+ .id_table = cs5535_pci_tbl,
+ .probe = cs5535_init_one,
+ .remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init cs5535_ide_init(void)
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index e6d8ee8..69820e9 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -332,7 +332,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
/*
* this function is called during init and is used to setup the cy82c693 chip
*/
-static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev)
+static unsigned int init_chipset_cy82c693(struct pci_dev *dev)
{
if (PCI_FUNC(dev->devfn) != 1)
return 0;
@@ -448,6 +448,8 @@ static struct pci_driver driver = {
.id_table = cy82c693_pci_tbl,
.probe = cy82c693_init_one,
.remove = __devexit_p(cy82c693_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init cy82c693_ide_init(void)
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index f84bfb4..83b63b3 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -19,7 +19,6 @@

#include
#include
-#include
#include
#include
#include
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index b07d4f4..092b238 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -22,7 +22,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -172,6 +171,8 @@ static struct pci_driver driver = {
.id_table = generic_pci_tbl,
.probe = generic_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init generic_ide_init(void)
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index 6009b0b..644de29 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -27,7 +27,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -79,7 +78,7 @@ static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
*/
#define HPT34X_PCI_INIT_REG 0x80

-static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev)
+static unsigned int init_chipset_hpt34x(struct pci_dev *dev)
{
int i = 0;
unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
@@ -172,6 +171,8 @@ static struct pci_driver driver = {
.id_table = hpt34x_pci_tbl,
.probe = hpt34x_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init hpt34x_ide_init(void)
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index c37ab17..a194022 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -122,7 +122,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -605,10 +604,10 @@ static const struct hpt_info hpt371n __devinitdata = {

static int check_in_drive_list(ide_drive_t *drive, const char **list)
{
- struct hd_driveid *id = drive->id;
+ char *m = (char *)&drive->id[ATA_ID_PROD];

while (*list)
- if (!strcmp(*list++,id->model))
+ if (!strcmp(*list++, m))
return 1;
return 0;
}
@@ -655,7 +654,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
case HPT372A:
case HPT372N:
case HPT374 :
- if (ide_dev_is_sata(drive->id))
+ if (ata_id_is_sata(drive->id))
mask &= ~0x0e;
/* Fall thru */
default:
@@ -675,7 +674,7 @@ static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
case HPT372A:
case HPT372N:
case HPT374 :
- if (ide_dev_is_sata(drive->id))
+ if (ata_id_is_sata(drive->id))
return 0x00;
/* Fall thru */
default:
@@ -731,11 +730,11 @@ static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)

static void hpt3xx_quirkproc(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
+ char *m = (char *)&drive->id[ATA_ID_PROD];
const char **list = quirk_drives;

while (*list)
- if (strstr(id->model, *list++)) {
+ if (strstr(m, *list++)) {
drive->quirk_list = 1;
return;
}
@@ -944,7 +943,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
* Perform a calibration cycle on the DPLL.
* Returns 1 if this succeeds
*/
-static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high)
+static int hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high)
{
u32 dpll = (f_high << 16) | f_low | 0x100;
u8 scr2;
@@ -972,7 +971,37 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
return 1;
}

-static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
+static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ u8 chip_type = info->chip_type;
+ u8 new_mcr, old_mcr = 0;
+
+ /*
+ * Disable the "fast interrupt" prediction. Don't hold off
+ * on interrupts. (== 0x01 despite what the docs say)
+ */
+ pci_read_config_byte(dev, mcr_addr + 1, &old_mcr);
+
+ if (chip_type >= HPT374)
+ new_mcr = old_mcr & ~0x07;
+ else if (chip_type >= HPT370) {
+ new_mcr = old_mcr;
+ new_mcr &= ~0x02;
+#ifdef HPT_DELAY_INTERRUPT
+ new_mcr &= ~0x01;
+#else
+ new_mcr |= 0x01;
+#endif
+ } else /* HPT366 and HPT368 */
+ new_mcr = old_mcr & ~0x80;
+
+ if (new_mcr != old_mcr)
+ pci_write_config_byte(dev, mcr_addr + 1, new_mcr);
+}
+
+static unsigned int init_chipset_hpt366(struct pci_dev *dev)
{
unsigned long io_base = pci_resource_start(dev, 4);
struct hpt_info *info = hpt3xx_get_info(&dev->dev);
@@ -1209,9 +1238,11 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
* NOTE: This register is only writeable via I/O space.
*/
if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
-
outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);

+ hpt3xx_disable_fast_irq(dev, 0x50);
+ hpt3xx_disable_fast_irq(dev, 0x54);
+
return dev->irq;
}

@@ -1265,7 +1296,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
- u8 new_mcr, old_mcr = 0;

/* Cache the channel's MISC. control registers' offset */
hwif->select_data = hwif->channel ? 0x54 : 0x50;
@@ -1288,29 +1318,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
/* Serialize access to this device if needed */
if (serialize && hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
-
- /*
- * Disable the "fast interrupt" prediction. Don't hold off
- * on interrupts. (== 0x01 despite what the docs say)
- */
- pci_read_config_byte(dev, hwif->select_data + 1, &old_mcr);
-
- if (info->chip_type >= HPT374)
- new_mcr = old_mcr & ~0x07;
- else if (info->chip_type >= HPT370) {
- new_mcr = old_mcr;
- new_mcr &= ~0x02;
-
-#ifdef HPT_DELAY_INTERRUPT
- new_mcr &= ~0x01;
-#else
- new_mcr |= 0x01;
-#endif
- } else /* HPT366 and HPT368 */
- new_mcr = old_mcr & ~0x80;
-
- if (new_mcr != old_mcr)
- pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
}

static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
@@ -1620,6 +1627,8 @@ static struct pci_driver driver = {
.id_table = hpt366_pci_tbl,
.probe = hpt366_init_one,
.remove = __devexit_p(hpt366_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init hpt366_ide_init(void)
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 652e47d..0954ccd 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -10,7 +10,6 @@
#include
#include
#include
-#include
#include
#include

@@ -195,6 +194,8 @@ static struct pci_driver driver = {
.id_table = it8213_pci_tbl,
.probe = it8213_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init it8213_ide_init(void)
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 4a1508a..46edd08 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -63,7 +63,6 @@
#include
#include
#include
-#include
#include
#include

@@ -446,8 +445,7 @@ static u8 it821x_cable_detect(ide_hwif_t *hwif)
static void it821x_quirkproc(ide_drive_t *drive)
{
struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif);
- struct hd_driveid *id = drive->id;
- u16 *idbits = (u16 *)drive->id;
+ u16 *id = drive->id;

if (!itdev->smart) {
/*
@@ -466,36 +464,36 @@ static void it821x_quirkproc(ide_drive_t *drive)
*/

/* Check for RAID v native */
- if(strstr(id->model, "Integrated Technology Express")) {
+ if (strstr((char *)&id[ATA_ID_PROD],
+ "Integrated Technology Express")) {
/* In raid mode the ident block is slightly buggy
We need to set the bits so that the IDE layer knows
LBA28. LBA48 and DMA ar valid */
- id->capability |= 3; /* LBA28, DMA */
- id->command_set_2 |= 0x0400; /* LBA48 valid */
- id->cfs_enable_2 |= 0x0400; /* LBA48 on */
+ id[ATA_ID_CAPABILITY] |= (3 << 8); /* LBA28, DMA */
+ id[ATA_ID_COMMAND_SET_2] |= 0x0400; /* LBA48 valid */
+ id[ATA_ID_CFS_ENABLE_2] |= 0x0400; /* LBA48 on */
/* Reporting logic */
printk(KERN_INFO "%s: IT8212 %sRAID %d volume",
- drive->name,
- idbits[147] ? "Bootable ":"",
- idbits[129]);
- if(idbits[129] != 1)
- printk("(%dK stripe)", idbits[146]);
- printk(".\n");
+ drive->name, id[147] ? "Bootable " : "",
+ id[ATA_ID_CSFO]);
+ if (id[ATA_ID_CSFO] != 1)
+ printk(KERN_CONT "(%dK stripe)", id[146]);
+ printk(KERN_CONT ".\n");
} else {
/* Non RAID volume. Fixups to stop the core code
doing unsupported things */
- id->field_valid &= 3;
- id->queue_depth = 0;
- id->command_set_1 = 0;
- id->command_set_2 &= 0xC400;
- id->cfsse &= 0xC000;
- id->cfs_enable_1 = 0;
- id->cfs_enable_2 &= 0xC400;
- id->csf_default &= 0xC000;
- id->word127 = 0;
- id->dlf = 0;
- id->csfo = 0;
- id->cfa_power = 0;
+ id[ATA_ID_FIELD_VALID] &= 3;
+ id[ATA_ID_QUEUE_DEPTH] = 0;
+ id[ATA_ID_COMMAND_SET_1] = 0;
+ id[ATA_ID_COMMAND_SET_2] &= 0xC400;
+ id[ATA_ID_CFSSE] &= 0xC000;
+ id[ATA_ID_CFS_ENABLE_1] = 0;
+ id[ATA_ID_CFS_ENABLE_2] &= 0xC400;
+ id[ATA_ID_CSF_DEFAULT] &= 0xC000;
+ id[127] = 0;
+ id[ATA_ID_DLF] = 0;
+ id[ATA_ID_CSFO] = 0;
+ id[ATA_ID_CFA_POWER] = 0;
printk(KERN_INFO "%s: Performing identify fixups.\n",
drive->name);
}
@@ -505,8 +503,8 @@ static void it821x_quirkproc(ide_drive_t *drive)
* IDE core that DMA is supported (it821x hardware
* takes care of DMA mode programming).
*/
- if (id->capability & 1) {
- id->dma_mword |= 0x0101;
+ if (ata_id_has_dma(id)) {
+ id[ATA_ID_MWDMA_MODES] |= 0x0101;
drive->current_speed = XFER_MW_DMA_0;
}
}
@@ -588,7 +586,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
hwif->mwdma_mask = ATA_MWDMA2;
}

-static void __devinit it8212_disable_raid(struct pci_dev *dev)
+static void it8212_disable_raid(struct pci_dev *dev)
{
/* Reset local CPU, and set BIOS not ready */
pci_write_config_byte(dev, 0x5E, 0x01);
@@ -605,7 +603,7 @@ static void __devinit it8212_disable_raid(struct pci_dev *dev)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
}

-static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev)
+static unsigned int init_chipset_it821x(struct pci_dev *dev)
{
u8 conf;
static char *mode[2] = { "pass through", "smart" };
@@ -687,6 +685,8 @@ static struct pci_driver driver = {
.id_table = it821x_pci_tbl,
.probe = it821x_init_one,
.remove = __devexit_p(it821x_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init it821x_ide_init(void)
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index bb9d09d..acd6471 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -8,7 +8,6 @@
#include
#include
#include
-#include
#include
#include

@@ -155,6 +154,8 @@ static struct pci_driver driver = {
.id_table = jmicron_pci_tbl,
.probe = jmicron_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init jmicron_ide_init(void)
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index ffefcd1..53bd645 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -11,7 +11,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -274,9 +273,9 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
do {
udelay(50);
stat = hwif->tp_ops->read_status(hwif);
- if (stat == 0xff)
- break;
- } while ((stat & BUSY_STAT) && --timeout);
+ if (stat == 0xff)
+ break;
+ } while ((stat & ATA_BUSY) && --timeout);
#endif
}

@@ -340,6 +339,8 @@ static struct pci_driver driver = {
.id_table = ns87415_pci_tbl,
.probe = ns87415_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init ns87415_ide_init(void)
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index e28e672..3de11dd 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -85,7 +85,6 @@
#include
#include
#include
-#include
#include

#include
@@ -137,7 +136,7 @@ static u8 read_reg(int reg)
static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *pair = ide_get_paired_drive(drive);
+ ide_drive_t *pair = ide_get_pair_dev(drive);
unsigned long flags;
u8 tim, misc, addr_pio = pio, clk;

@@ -153,7 +152,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)

drive->drive_data = XFER_PIO_0 + pio;

- if (pair->present) {
+ if (pair) {
if (pair->drive_data && pair->drive_data < drive->drive_data)
addr_pio = pair->drive_data - XFER_PIO_0;
}
@@ -226,6 +225,8 @@ static struct pci_driver driver = {
.id_table = opti621_pci_tbl,
.probe = opti621_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init opti621_ide_init(void)
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index d477da6..9fc5996 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -19,7 +19,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -203,10 +202,10 @@ static u8 pdcnew_cable_detect(ide_hwif_t *hwif)

static void pdcnew_quirkproc(ide_drive_t *drive)
{
- const char **list, *model = drive->id->model;
+ const char **list, *m = (char *)&drive->id[ATA_ID_PROD];

for (list = pdc_quirk_drives; *list != NULL; list++)
- if (strstr(model, *list) != NULL) {
+ if (strstr(m, *list) != NULL) {
drive->quirk_list = 2;
return;
}
@@ -227,7 +226,7 @@ static void pdcnew_reset(ide_drive_t *drive)
* read_counter - Read the byte count registers
* @dma_base: for the port address
*/
-static long __devinit read_counter(u32 dma_base)
+static long read_counter(u32 dma_base)
{
u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08;
u8 cnt0, cnt1, cnt2, cnt3;
@@ -267,7 +266,7 @@ static long __devinit read_counter(u32 dma_base)
* @dma_base: for the port address
* E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock.
*/
-static long __devinit detect_pll_input_clock(unsigned long dma_base)
+static long detect_pll_input_clock(unsigned long dma_base)
{
struct timeval start_time, end_time;
long start_count, end_count;
@@ -310,7 +309,7 @@ static long __devinit detect_pll_input_clock(unsigned long dma_base)
}

#ifdef CONFIG_PPC_PMAC
-static void __devinit apple_kiwi_init(struct pci_dev *pdev)
+static void apple_kiwi_init(struct pci_dev *pdev)
{
struct device_node *np = pci_device_to_OF_node(pdev);
u8 conf;
@@ -326,7 +325,7 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev)
}
#endif /* CONFIG_PPC_PMAC */

-static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev)
+static unsigned int init_chipset_pdcnew(struct pci_dev *dev)
{
const char *name = DRV_NAME;
unsigned long dma_base = pci_resource_start(dev, 4);
@@ -567,6 +566,8 @@ static struct pci_driver driver = {
.id_table = pdc202new_pci_tbl,
.probe = pdc202new_init_one,
.remove = __devexit_p(pdc202new_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init pdc202new_ide_init(void)
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index de9a274..cb6d2a0 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -13,7 +13,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -86,7 +85,7 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
* Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
*/
AP &= ~0x3f;
- if (drive->id->capability & 4)
+ if (ata_id_iordy_disable(drive->id))
AP |= 0x20; /* set IORDY_EN bit */
if (drive->media == ide_disk)
AP |= 0x10; /* set Prefetch_EN bit */
@@ -154,10 +153,10 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)

static void pdc202xx_quirkproc(ide_drive_t *drive)
{
- const char **list, *model = drive->id->model;
+ const char **list, *m = (char *)&drive->id[ATA_ID_PROD];

for (list = pdc_quirk_drives; *list != NULL; list++)
- if (strstr(model, *list) != NULL) {
+ if (strstr(m, *list) != NULL) {
drive->quirk_list = 2;
return;
}
@@ -265,7 +264,7 @@ static void pdc202xx_dma_timeout(ide_drive_t *drive)
ide_dma_timeout(drive);
}

-static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev)
+static unsigned int init_chipset_pdc202xx(struct pci_dev *dev)
{
unsigned long dmabase = pci_resource_start(dev, 4);
u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
@@ -432,6 +431,8 @@ static struct pci_driver driver = {
.id_table = pdc202xx_pci_tbl,
.probe = pdc202xx_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init pdc202xx_ide_init(void)
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 30cfc81..a06c03f 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -48,7 +48,6 @@
#include
#include
#include
-#include
#include
#include

@@ -205,7 +204,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
* out to be nice and simple.
*/

-static unsigned int __devinit init_chipset_ich(struct pci_dev *dev)
+static unsigned int init_chipset_ich(struct pci_dev *dev)
{
u32 extra = 0;

@@ -450,6 +449,8 @@ static struct pci_driver driver = {
.id_table = piix_pci_tbl,
.probe = piix_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init piix_ide_init(void)
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index 8d11ee8..c117a06 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -16,7 +16,6 @@
#include
#include
#include
-#include
#include
#include
#include
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 8efaed1..bdc1fed 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -14,7 +14,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -104,17 +103,19 @@ static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
static u8 sc1200_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
- struct hd_driveid *mateid = mate->id;
+ ide_drive_t *mate = ide_get_pair_dev(drive);
+ u16 *mateid = mate->id;
u8 mask = hwif->ultra_mask;

- if (mate->present == 0)
+ if (mate == NULL)
goto out;

- if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
- if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+ if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
+ if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
+ (mateid[ATA_ID_UDMA_MODES] & 7))
goto out;
- if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+ if ((mateid[ATA_ID_FIELD_VALID] & 2) &&
+ (mateid[ATA_ID_MWDMA_MODES] & 7))
mask = 0;
}
out:
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 44cccd1..e92a874 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -26,7 +26,6 @@
#include
#include
#include
-#include
#include
#include

@@ -400,7 +399,7 @@ static int scc_dma_end(ide_drive_t *drive)
/* errata A308 workaround: Step5 (check data loss) */
/* We don't check non ide_disk because it is limited to UDMA4 */
if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
- & ERR_STAT) &&
+ & ATA_ERR) &&
drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
reg = in_be32((void __iomem *)intsts_port);
if (!(reg & INTSTS_ACTEINT)) {
@@ -504,7 +503,7 @@ static int scc_dma_test_irq(ide_drive_t *drive)

/* SCC errata A252,A308 workaround: Step4 */
if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
- & ERR_STAT) &&
+ & ATA_ERR) &&
(int_stat & INTSTS_INTRQ))
return 1;

diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index c3bdc6e..3dff2ae 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -32,7 +32,6 @@
#include
#include
#include
-#include
#include
#include

@@ -57,8 +56,10 @@ static struct pci_dev *isa_dev;

static int check_in_drive_lists (ide_drive_t *drive, const char **list)
{
+ char *m = (char *)&drive->id[ATA_ID_PROD];
+
while (*list)
- if (!strcmp(*list++, drive->id->model))
+ if (!strcmp(*list++, m))
return 1;
return 0;
}
@@ -174,7 +175,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_write_config_byte(dev, 0x54, ultra_enable);
}

-static unsigned int __devinit init_chipset_svwks(struct pci_dev *dev)
+static unsigned int init_chipset_svwks(struct pci_dev *dev)
{
unsigned int reg;
u8 btr;
@@ -447,6 +448,8 @@ static struct pci_driver driver = {
.id_table = svwks_pci_tbl,
.probe = svwks_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init svwks_ide_init(void)
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 681306c..1017fb4 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -22,7 +22,6 @@
#include
#include
#include
-#include
#include
#include
#include
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index db2b88a..174a873 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -39,7 +39,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -223,7 +222,9 @@ static u8 sil_pata_udma_filter(ide_drive_t *drive)

static u8 sil_sata_udma_filter(ide_drive_t *drive)
{
- return strstr(drive->id->model, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
+ char *m = (char *)&drive->id[ATA_ID_PROD];
+
+ return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
}

/**
@@ -243,7 +244,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)

ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- ide_drive_t *pair = ide_get_paired_drive(drive);
+ ide_drive_t *pair = ide_get_pair_dev(drive);
u32 speedt = 0;
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
@@ -257,7 +258,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
u8 unit = drive->select.b.unit;

/* trim *taskfile* PIO to the slowest of the master/slave */
- if (pair->present) {
+ if (pair) {
u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);

if (pair_pio < tf_pio)
@@ -462,7 +463,7 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
* to 133 MHz clocking if the system isn't already set up to do it.
*/

-static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev)
+static unsigned int init_chipset_siimage(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
void __iomem *ioaddr = host->host_priv;
@@ -616,8 +617,8 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)

static int is_dev_seagate_sata(ide_drive_t *drive)
{
- const char *s = &drive->id->model[0];
- unsigned len = strnlen(s, sizeof(drive->id->model));
+ const char *s = (const char *)&drive->id[ATA_ID_PROD];
+ unsigned len = strnlen(s, ATA_ID_PROD_LEN);

if ((len > 4) && (!memcmp(s, "ST", 2)))
if ((!memcmp(s + len - 2, "AS", 2)) ||
@@ -833,6 +834,8 @@ static struct pci_driver driver = {
.id_table = siimage_pci_tbl,
.probe = siimage_init_one,
.remove = __devexit_p(siimage_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init siimage_ide_init(void)
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 5efe21d..734dd41 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -47,7 +47,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -448,7 +447,7 @@ static int __devinit sis_find_family(struct pci_dev *dev)
return chipset_family;
}

-static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev)
+static unsigned int init_chipset_sis5513(struct pci_dev *dev)
{
/* Make general config ops here
1/ tell IDE channels to operate in Compatibility mode only
@@ -611,6 +610,8 @@ static struct pci_driver driver = {
.id_table = sis5513_pci_tbl,
.probe = sis5513_init_one,
.remove = __devexit_p(sis5513_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init sis5513_ide_init(void)
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 73905bc..37a6b7b 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -17,7 +17,6 @@
#include
#include
#include
-#include
#include
#include

@@ -62,7 +61,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
if (cmd_off == 0)
cmd_off = 1;

- if (pio > 2 || ide_dev_has_iordy(drive->id))
+ if (pio > 2 || ata_id_has_iordy(drive->id))
iordy = 0x40;

return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
@@ -272,7 +271,7 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev)
* channel 0 here at least, but channel 1 has to be enabled by
* firmware or arch code. We still set both to 16 bits mode.
*/
-static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev)
+static unsigned int init_chipset_sl82c105(struct pci_dev *dev)
{
u32 val;

@@ -351,6 +350,8 @@ static struct pci_driver driver = {
.id_table = sl82c105_pci_tbl,
.probe = sl82c105_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init sl82c105_ide_init(void)
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 866d6c6..a9551a1 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -11,7 +11,6 @@
#include
#include
#include
-#include
#include
#include

@@ -160,6 +159,8 @@ static struct pci_driver driver = {
.id_table = slc90e66_pci_tbl,
.probe = slc90e66_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init slc90e66_ide_init(void)
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index b77ec35..be8715d 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -28,7 +28,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -120,6 +119,8 @@ static struct pci_driver driver = {
.id_table = triflex_pci_tbl,
.probe = triflex_init_one,
.remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init triflex_ide_init(void)
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index fd28b49..4dfbc6a 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -135,7 +135,6 @@
#include
#include
#include
-#include
#include
#include

diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 94fb9ab..acacdaa 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -154,7 +154,7 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
static void via_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
+ ide_drive_t *peer = ide_get_pair_dev(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
struct via82cxxx_dev *vdev = host->host_priv;
@@ -173,7 +173,7 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed)

ide_timing_compute(drive, speed, &t, T, UT);

- if (peer->present) {
+ if (peer) {
ide_timing_compute(peer, peer->current_speed, &p, T, UT);
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
}
@@ -215,7 +215,7 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
/*
* Check and handle 80-wire cable presence
*/
-static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
+static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
{
int i;

@@ -267,7 +267,7 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
* and initialize its drive independent registers.
*/

-static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev)
+static unsigned int init_chipset_via82cxxx(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct via82cxxx_dev *vdev = host->host_priv;
@@ -492,6 +492,8 @@ static struct pci_driver driver = {
.id_table = via_pci_tbl,
.probe = via_init_one,
.remove = __devexit_p(via_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};

static int __init via_ide_init(void)
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index fa2be26..c3432da 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -669,9 +669,9 @@ static void
set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
u8 speed)
{
+ u16 *id = drive->id;
int cycleTime, accessTime = 0, recTime = 0;
unsigned accessTicks, recTicks;
- struct hd_driveid *id = drive->id;
struct mdma_timings_t* tm = NULL;
int i;

@@ -686,8 +686,8 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
}

/* Check if drive provides explicit DMA cycle time */
- if ((id->field_valid & 2) && id->eide_dma_time)
- cycleTime = max_t(int, id->eide_dma_time, cycleTime);
+ if ((id[ATA_ID_FIELD_VALID] & 2) && id[ATA_ID_EIDE_DMA_TIME])
+ cycleTime = max_t(int, id[ATA_ID_EIDE_DMA_TIME], cycleTime);

/* OHare limits according to some old Apple sources */
if ((intf_type == controller_ohare) && (cycleTime < 150))
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index a8e9e8a..9f1f916 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -659,3 +659,36 @@ void ide_pci_remove(struct pci_dev *dev)
pci_disable_device(dev);
}
EXPORT_SYMBOL_GPL(ide_pci_remove);
+
+#ifdef CONFIG_PM
+int ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ pci_save_state(dev);
+ pci_disable_device(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_pci_suspend);
+
+int ide_pci_resume(struct pci_dev *dev)
+{
+ struct ide_host *host = pci_get_drvdata(dev);
+ int rc;
+
+ pci_set_power_state(dev, PCI_D0);
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ pci_restore_state(dev);
+ pci_set_master(dev);
+
+ if (host->init_chipset)
+ host->init_chipset(dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_pci_resume);
+#endif
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 81c16cb..90212ac 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -40,7 +40,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -131,50 +130,6 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive)
return scsihost_to_idescsi(ide_drive->driver_data);
}

-/*
- * PIO data transfer routine using the scatter gather table.
- */
-static void ide_scsi_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount, int write)
-{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_tp_ops *tp_ops = hwif->tp_ops;
- xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data;
- char *buf;
- int count;
-
- while (bcount) {
- count = min(pc->sg->length - pc->b_count, bcount);
- if (PageHighMem(sg_page(pc->sg))) {
- unsigned long flags;
-
- local_irq_save(flags);
- buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
- pc->sg->offset;
- xf(drive, NULL, buf + pc->b_count, count);
- kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
- local_irq_restore(flags);
- } else {
- buf = sg_virt(pc->sg);
- xf(drive, NULL, buf + pc->b_count, count);
- }
- bcount -= count; pc->b_count += count;
- if (pc->b_count == pc->sg->length) {
- if (!--pc->sg_cnt)
- break;
- pc->sg = sg_next(pc->sg);
- pc->b_count = 0;
- }
- }
-
- if (bcount) {
- printk(KERN_ERR "%s: scatter gather table too small, %s\n",
- drive->name, write ? "padding with zeros"
- : "discarding data");
- ide_pad_transfer(drive, write, bcount);
- }
-}
-
static void ide_scsi_hex_dump(u8 *data, int len)
{
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
@@ -244,9 +199,9 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
ide_hwif_t *hwif = drive->hwif;

- if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
/* force an abort */
- hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE);
+ hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);

rq->errors++;

@@ -344,7 +299,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)

return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc),
idescsi_expiry, NULL, NULL, NULL,
- ide_scsi_io_buffers);
+ ide_io_buffers);
}

static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
@@ -430,21 +385,41 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r
}

#ifdef CONFIG_IDE_PROC_FS
-static void idescsi_add_settings(ide_drive_t *drive)
-{
- idescsi_scsi_t *scsi = drive_to_idescsi(drive);
-
-/*
- * drive setting name read/write data type min max mul_factor div_factor data pointer set function
- */
- ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL);
- ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL);
- ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL);
- ide_add_setting(drive, "transform", SETTING_RW, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL);
- ide_add_setting(drive, "log", SETTING_RW, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL);
-}
-#else
-static inline void idescsi_add_settings(ide_drive_t *drive) { ; }
+#define ide_scsi_devset_get(name, field) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive); \
+ return scsi->field; \
+}
+
+#define ide_scsi_devset_set(name, field) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive); \
+ scsi->field = arg; \
+ return 0; \
+}
+
+#define ide_scsi_devset_rw_field(_name, _field) \
+ide_scsi_devset_get(_name, _field); \
+ide_scsi_devset_set(_name, _field); \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name);
+
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);
+
+ide_scsi_devset_rw_field(transform, transform);
+ide_scsi_devset_rw_field(log, log);
+
+static const struct ide_proc_devset idescsi_settings[] = {
+ IDE_PROC_DEVSET(bios_cyl, 0, 1023),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(log, 0, 1),
+ IDE_PROC_DEVSET(transform, 0, 3),
+ { 0 },
+};
#endif

/*
@@ -452,7 +427,7 @@ static inline void idescsi_add_settings(ide_drive_t *drive) { ; }
*/
static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
{
- if (drive->id && (drive->id->config & 0x0060) == 0x20)
+ if ((drive->id[ATA_ID_CONFIG] & 0x0060) == 0x20)
set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
#if IDESCSI_DEBUG_LOG
@@ -461,7 +436,7 @@ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)

drive->pc_callback = ide_scsi_callback;

- idescsi_add_settings(drive);
+ ide_proc_register_driver(drive, scsi->driver);
}

static void ide_scsi_remove(ide_drive_t *drive)
@@ -503,12 +478,12 @@ static ide_driver_t idescsi_driver = {
.remove = ide_scsi_remove,
.version = IDESCSI_VERSION,
.media = ide_scsi,
- .supports_dsc_overlap = 0,
.do_request = idescsi_do_request,
.end_request = idescsi_end_request,
.error = idescsi_atapi_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idescsi_proc,
+ .settings = idescsi_settings,
#endif
};

@@ -811,6 +786,7 @@ static int ide_scsi_probe(ide_drive_t *drive)
struct gendisk *g;
static int warned;
int err = -ENOMEM;
+ u16 last_lun;

if (!warned && drive->media == ide_cdrom) {
printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n");
@@ -821,7 +797,6 @@ static int ide_scsi_probe(ide_drive_t *drive)
return -ENODEV;

if (!strstr("ide-scsi", drive->driver_req) ||
- !drive->present ||
drive->media == ide_disk ||
!(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
return -ENODEV;
@@ -836,12 +811,12 @@ static int ide_scsi_probe(ide_drive_t *drive)

host->max_id = 1;

- if (drive->id->last_lun)
- debug_log("%s: id->last_lun=%u\n", drive->name,
- drive->id->last_lun);
+ last_lun = drive->id[ATA_ID_LAST_LUN];
+ if (last_lun)
+ debug_log("%s: last_lun=%u\n", drive->name, last_lun);

- if ((drive->id->last_lun & 0x7) != 7)
- host->max_lun = (drive->id->last_lun & 0x7) + 1;
+ if ((last_lun & 7) != 7)
+ host->max_lun = (last_lun & 7) + 1;
else
host->max_lun = 1;

@@ -852,7 +827,6 @@ static int ide_scsi_probe(ide_drive_t *drive)
idescsi->host = host;
idescsi->disk = g;
g->private_data = &idescsi->driver;
- ide_proc_register_driver(drive, &idescsi_driver);
err = 0;
idescsi_setup(drive, idescsi);
g->fops = &idescsi_ops;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index be00973..a53318b 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -30,6 +30,7 @@
#define __LINUX_ATA_H__

#include
+#include

/* defines only for the constants which don't work well as enums */
#define ATA_DMA_BOUNDARY 0xffffUL
@@ -558,6 +559,15 @@ static inline int ata_id_has_flush(const u16 *id)
return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
}

+static inline int ata_id_flush_enabled(const u16 *id)
+{
+ if (ata_id_has_flush(id) == 0)
+ return 0;
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+ return 0;
+ return id[ATA_ID_CFS_ENABLE_2] & (1 << 12);
+}
+
static inline int ata_id_has_flush_ext(const u16 *id)
{
if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
@@ -565,6 +575,19 @@ static inline int ata_id_has_flush_ext(const u16 *id)
return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
}

+static inline int ata_id_flush_ext_enabled(const u16 *id)
+{
+ if (ata_id_has_flush_ext(id) == 0)
+ return 0;
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+ return 0;
+ /*
+ * some Maxtor disks have bit 13 defined incorrectly
+ * so check bit 10 too
+ */
+ return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400;
+}
+
static inline int ata_id_has_lba48(const u16 *id)
{
if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
@@ -574,6 +597,15 @@ static inline int ata_id_has_lba48(const u16 *id)
return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
}

+static inline int ata_id_lba48_enabled(const u16 *id)
+{
+ if (ata_id_has_lba48(id) == 0)
+ return 0;
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+ return 0;
+ return id[ATA_ID_CFS_ENABLE_2] & (1 << 10);
+}
+
static inline int ata_id_hpa_enabled(const u16 *id)
{
/* Yes children, word 83 valid bits cover word 82 data */
@@ -645,7 +677,15 @@ static inline unsigned int ata_id_major_version(const u16 *id)

static inline int ata_id_is_sata(const u16 *id)
{
- return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0;
+ /*
+ * See if word 93 is 0 AND drive is at least ATA-5 compatible
+ * verifying that word 80 by casting it to a signed type --
+ * this trick allows us to filter out the reserved values of
+ * 0x0000 and 0xffff along with the earlier ATA revisions...
+ */
+ if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020)
+ return 1;
+ return 0;
}

static inline int ata_id_has_tpm(const u16 *id)
@@ -742,6 +782,76 @@ static inline int atapi_id_dmadir(const u16 *dev_id)
return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
}

+/*
+ * ata_id_is_lba_capacity_ok() performs a sanity check on
+ * the claimed LBA capacity value for the device.
+ *
+ * Returns 1 if LBA capacity looks sensible, 0 otherwise.
+ *
+ * It is called only once for each device.
+ */
+static inline int ata_id_is_lba_capacity_ok(u16 *id)
+{
+ unsigned long lba_sects, chs_sects, head, tail;
+
+ /* No non-LBA info .. so valid! */
+ if (id[ATA_ID_CYLS] == 0)
+ return 1;
+
+ lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
+
+ /*
+ * The ATA spec tells large drives to return
+ * C/H/S = 16383/16/63 independent of their size.
+ * Some drives can be jumpered to use 15 heads instead of 16.
+ * Some drives can be jumpered to use 4092 cyls instead of 16383.
+ */
+ if ((id[ATA_ID_CYLS] == 16383 ||
+ (id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) &&
+ id[ATA_ID_SECTORS] == 63 &&
+ (id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) &&
+ (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS]))
+ return 1;
+
+ chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS];
+
+ /* perform a rough sanity check on lba_sects: within 10% is OK */
+ if (lba_sects - chs_sects < chs_sects/10)
+ return 1;
+
+ /* some drives have the word order reversed */
+ head = (lba_sects >> 16) & 0xffff;
+ tail = lba_sects & 0xffff;
+ lba_sects = head | (tail << 16);
+
+ if (lba_sects - chs_sects < chs_sects/10) {
+ *(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects);
+ return 1; /* LBA capacity is (now) good */
+ }
+
+ return 0; /* LBA capacity value may be bad */
+}
+
+static inline void ata_id_to_hd_driveid(u16 *id)
+{
+#ifdef __BIG_ENDIAN
+ /* accessed in struct hd_driveid as 8-bit values */
+ id[ATA_ID_MAX_MULTSECT] = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]);
+ id[ATA_ID_CAPABILITY] = __cpu_to_le16(id[ATA_ID_CAPABILITY]);
+ id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]);
+ id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]);
+ id[ATA_ID_MULTSECT] = __cpu_to_le16(id[ATA_ID_MULTSECT]);
+
+ /* as 32-bit values */
+ *(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
+ *(u32 *)&id[ATA_ID_SPG] = ata_id_u32(id, ATA_ID_SPG);
+
+ /* as 64-bit value */
+ *(u64 *)&id[ATA_ID_LBA_CAPACITY_2] =
+ ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
+#endif
+}
+
static inline int is_multi_taskfile(struct ata_taskfile *tf)
{
return (tf->command == ATA_CMD_READ_MULTI) ||
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 6514db8..a9d82d6 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -8,7 +8,7 @@

#include
#include
-#include
+#include
#include
#include
#include
@@ -17,6 +17,7 @@
#include
#include
#include
+#include
#ifdef CONFIG_BLK_DEV_IDEACPI
#include
#endif
@@ -87,12 +88,13 @@ struct ide_io_ports {
};

#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
-#define BAD_R_STAT (BUSY_STAT | ERR_STAT)
-#define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
-#define BAD_STAT (BAD_R_STAT | DRQ_STAT)
-#define DRIVE_READY (READY_STAT | SEEK_STAT)

-#define BAD_CRC (ABRT_ERR | ICRC_ERR)
+#define BAD_R_STAT (ATA_BUSY | ATA_ERR)
+#define BAD_W_STAT (BAD_R_STAT | ATA_DF)
+#define BAD_STAT (BAD_R_STAT | ATA_DRQ)
+#define DRIVE_READY (ATA_DRDY | ATA_DSC)
+
+#define BAD_CRC (ATA_ABORTED | ATA_ICRC)

#define SATA_NR_PORTS (3) /* 16 possible ?? */

@@ -125,24 +127,41 @@ struct ide_io_ports {
#define PARTN_BITS 6 /* number of minor dev bits for partitions */
#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
#define SECTOR_SIZE 512
-#define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
+
#define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))

/*
* Timeouts for various operations:
*/
-#define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
-#define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
-#define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
-#define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
-#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
-#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
+enum {
+ /* spec allows up to 20ms */
+ WAIT_DRQ = HZ / 10, /* 100ms */
+ /* some laptops are very slow */
+ WAIT_READY = 5 * HZ, /* 5s */
+ /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
+ WAIT_PIDENTIFY = 10 * HZ, /* 10s */
+ /* worst case when spinning up */
+ WAIT_WORSTCASE = 30 * HZ, /* 30s */
+ /* maximum wait for an IRQ to happen */
+ WAIT_CMD = 10 * HZ, /* 10s */
+ /* Some drives require a longer IRQ timeout. */
+ WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */
+ /*
+ * Some drives (for example, Seagate STT3401A Travan) require a very
+ * long timeout, because they don't return an interrupt or clear their
+ * BSY bit until after the command completes (even retension commands).
+ */
+ WAIT_TAPE_CMD = 900 * HZ, /* 900s */
+ /* minimum sleep time */
+ WAIT_MIN_SLEEP = HZ / 50, /* 20ms */
+};

/*
* Op codes for special requests to be handled by ide_special_rq().
* Values should be in the range of 0x20 to 0x3f.
*/
#define REQ_DRIVE_RESET 0x20
+#define REQ_DEVSET_EXEC 0x21

/*
* Check for an interrupt and acknowledge the interrupt status
@@ -303,8 +322,8 @@ typedef enum {
ide_started, /* a drive operation was started, handler was set */
} ide_startstop_t;

+struct ide_devset;
struct ide_driver_s;
-struct ide_settings_s;

#ifdef CONFIG_BLK_DEV_IDEACPI
struct ide_acpi_drive_link;
@@ -315,10 +334,10 @@ struct ide_acpi_hwif_link;
enum {
IDE_AFLAG_DRQ_INTERRUPT = (1 << 0),
IDE_AFLAG_MEDIA_CHANGED = (1 << 1),
-
- /* ide-cd */
/* Drive cannot lock the door. */
IDE_AFLAG_NO_DOORLOCK = (1 << 2),
+
+ /* ide-cd */
/* Drive cannot eject the disc. */
IDE_AFLAG_NO_EJECT = (1 << 3),
/* Drive is a pre ATAPI 1.2 drive. */
@@ -354,21 +373,25 @@ enum {
IDE_AFLAG_CLIK_DRIVE = (1 << 19),
/* Requires BH algorithm for packets */
IDE_AFLAG_ZIP_DRIVE = (1 << 20),
+ /* Write protect */
+ IDE_AFLAG_WP = (1 << 21),
+ /* Supports format progress report */
+ IDE_AFLAG_SRFP = (1 << 22),

/* ide-tape */
- IDE_AFLAG_IGNORE_DSC = (1 << 21),
+ IDE_AFLAG_IGNORE_DSC = (1 << 23),
/* 0 When the tape position is unknown */
- IDE_AFLAG_ADDRESS_VALID = (1 << 22),
+ IDE_AFLAG_ADDRESS_VALID = (1 << 24),
/* Device already opened */
- IDE_AFLAG_BUSY = (1 << 23),
+ IDE_AFLAG_BUSY = (1 << 25),
/* Attempt to auto-detect the current user block size */
- IDE_AFLAG_DETECT_BS = (1 << 24),
+ IDE_AFLAG_DETECT_BS = (1 << 26),
/* Currently on a filemark */
- IDE_AFLAG_FILEMARK = (1 << 25),
+ IDE_AFLAG_FILEMARK = (1 << 27),
/* 0 = no tape is loaded, so we don't rewind after ejecting */
- IDE_AFLAG_MEDIUM_PRESENT = (1 << 26),
+ IDE_AFLAG_MEDIUM_PRESENT = (1 << 28),

- IDE_AFLAG_NO_AUTOCLOSE = (1 << 27),
+ IDE_AFLAG_NO_AUTOCLOSE = (1 << 29),
};

struct ide_drive_s {
@@ -380,10 +403,10 @@ struct ide_drive_s {
struct request *rq; /* current request */
struct ide_drive_s *next; /* circular list of hwgroup drives */
void *driver_data; /* extra driver data */
- struct hd_driveid *id; /* drive model identification info */
+ u16 *id; /* identification info */
#ifdef CONFIG_IDE_PROC_FS
struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
- struct ide_settings_s *settings;/* /proc/ide/ drive settings */
+ const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
#endif
struct hwif_s *hwif; /* actually (ide_hwif_t *) */

@@ -395,16 +418,16 @@ struct ide_drive_s {
special_t special; /* special action flags */
select_t select; /* basic drive/head select reg value */

- u8 keep_settings; /* restore settings after drive reset */
- u8 using_dma; /* disk is using dma for read/write */
u8 retry_pio; /* retrying dma capable host in pio */
u8 state; /* retry state */
u8 waiting_for_dma; /* dma currently in progress */
- u8 unmask; /* okay to unmask other irqs */
- u8 noflush; /* don't attempt flushes */
- u8 dsc_overlap; /* DSC overlap */
- u8 nice1; /* give potential excess bandwidth */

+ unsigned keep_settings : 1; /* restore settings after drive reset */
+ unsigned using_dma : 1; /* disk is using dma for read/write */
+ unsigned unmask : 1; /* okay to unmask other irqs */
+ unsigned noflush : 1; /* don't attempt flushes */
+ unsigned dsc_overlap : 1; /* DSC overlap */
+ unsigned nice1 : 1; /* give potential excess bandwidth */
unsigned present : 1; /* drive is physically present */
unsigned dead : 1; /* device ejected hint */
unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
@@ -414,23 +437,22 @@ struct ide_drive_s {
unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
unsigned no_unmask : 1; /* disallow setting unmask bit */
unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
- unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
unsigned nodma : 1; /* disallow DMA */
- unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
unsigned post_reset : 1;
unsigned udma33_warned : 1;
+ unsigned addressing : 2; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
+ unsigned wcache : 1; /* status of write cache */
+ unsigned nowerr : 1; /* used for ignoring ATA_DF */

- u8 addressing; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
u8 quirk_list; /* considered quirky, set for a specific host */
u8 init_speed; /* transfer rate set at boot */
u8 current_speed; /* current transfer rate set */
u8 desired_speed; /* desired transfer rate set */
u8 dn; /* now wide spread use */
- u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
u8 media; /* disk, cdrom, tape, floppy, ... */
u8 ready_stat; /* min status value for drive ready */
@@ -438,9 +460,7 @@ struct ide_drive_s {
u8 mult_req; /* requested multiple sector setting */
u8 tune_req; /* requested drive tuning setting */
u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
- u8 bad_wstat; /* used for ignoring WRERR_STAT */
- u8 nowerr; /* used for ignoring WRERR_STAT */
- u8 sect0; /* offset of first sector for DM6DO */
+ u8 bad_wstat; /* used for ignoring ATA_DF */
u8 head; /* "real" number of heads */
u8 sect; /* "real" sectors per track */
u8 bios_head; /* BIOS/fdisk/LILO number of heads */
@@ -474,10 +494,6 @@ typedef struct ide_drive_s ide_drive_t;

#define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)

-#define IDE_CHIPSET_PCI_MASK \
- ((1< -#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
-
struct ide_task_s;
struct ide_port_info;

@@ -567,7 +583,6 @@ typedef struct hwif_s {
u8 major; /* our major number */
u8 index; /* 0 for ide0; 1 for ide1; ... */
u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
- u8 bus_state; /* power state of the IDE bus */

u32 host_flags;

@@ -645,6 +660,7 @@ struct ide_host {
ide_hwif_t *ports[MAX_HWIFS];
unsigned int n_ports;
struct device *dev[2];
+ unsigned int (*init_chipset)(struct pci_dev *);
unsigned long host_flags;
void *host_priv;
};
@@ -692,9 +708,61 @@ typedef struct ide_driver_s ide_driver_t;

extern struct mutex ide_setting_mtx;

-int set_io_32bit(ide_drive_t *, int);
-int set_pio_mode(ide_drive_t *, int);
-int set_using_dma(ide_drive_t *, int);
+/*
+ * configurable drive settings
+ */
+
+#define DS_SYNC (1 << 0)
+
+struct ide_devset {
+ int (*get)(ide_drive_t *);
+ int (*set)(ide_drive_t *, int);
+ unsigned int flags;
+};
+
+#define __DEVSET(_flags, _get, _set) { \
+ .flags = _flags, \
+ .get = _get, \
+ .set = _set, \
+}
+
+#define ide_devset_get(name, field) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ return drive->field; \
+}
+
+#define ide_devset_set(name, field) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ drive->field = arg; \
+ return 0; \
+}
+
+#define __IDE_DEVSET(_name, _flags, _get, _set) \
+const struct ide_devset ide_devset_##_name = \
+ __DEVSET(_flags, _get, _set)
+
+#define IDE_DEVSET(_name, _flags, _get, _set) \
+static __IDE_DEVSET(_name, _flags, _get, _set)
+
+#define ide_devset_rw(_name, _func) \
+IDE_DEVSET(_name, 0, get_##_func, set_##_func)
+
+#define ide_devset_w(_name, _func) \
+IDE_DEVSET(_name, 0, NULL, set_##_func)
+
+#define ide_devset_rw_sync(_name, _func) \
+IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
+
+#define ide_decl_devset(_name) \
+extern const struct ide_devset ide_devset_##_name
+
+ide_decl_devset(io_32bit);
+ide_decl_devset(keepsettings);
+ide_decl_devset(pio_mode);
+ide_decl_devset(unmaskirq);
+ide_decl_devset(using_dma);

/* ATAPI packet command flags */
enum {
@@ -710,6 +778,12 @@ enum {
PC_FLAG_TIMEDOUT = (1 << 7),
};

+/*
+ * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
+ * This is used for several packet commands (not for READ/WRITE commands).
+ */
+#define IDE_PC_BUFFER_SIZE 256
+
struct ide_atapi_pc {
/* actual packet bytes */
u8 c[12];
@@ -739,7 +813,7 @@ struct ide_atapi_pc {
* those are more or less driver-specific and some of them are subject
* to change/removal later.
*/
- u8 pc_buf[256];
+ u8 pc_buf[IDE_PC_BUFFER_SIZE];

/* idetape only */
struct idetape_bh *bh;
@@ -757,37 +831,34 @@ struct ide_atapi_pc {

#ifdef CONFIG_IDE_PROC_FS
/*
- * configurable drive settings
+ * /proc/ide interface
*/

-#define TYPE_INT 0
-#define TYPE_BYTE 1
-#define TYPE_SHORT 2
+#define ide_devset_rw_field(_name, _field) \
+ide_devset_get(_name, _field); \
+ide_devset_set(_name, _field); \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
+
+struct ide_proc_devset {
+ const char *name;
+ const struct ide_devset *setting;
+ int min, max;
+ int (*mulf)(ide_drive_t *);
+ int (*divf)(ide_drive_t *);
+};

-#define SETTING_READ (1 << 0)
-#define SETTING_WRITE (1 << 1)
-#define SETTING_RW (SETTING_READ | SETTING_WRITE)
+#define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
+ .name = __stringify(_name), \
+ .setting = &ide_devset_##_name, \
+ .min = _min, \
+ .max = _max, \
+ .mulf = _mulf, \
+ .divf = _divf, \
+}

-typedef int (ide_procset_t)(ide_drive_t *, int);
-typedef struct ide_settings_s {
- char *name;
- int rw;
- int data_type;
- int min;
- int max;
- int mul_factor;
- int div_factor;
- void *data;
- ide_procset_t *set;
- int auto_remove;
- struct ide_settings_s *next;
-} ide_settings_t;
-
-int ide_add_setting(ide_drive_t *, const char *, int, int, int, int, int, int, void *, ide_procset_t *set);
+#define IDE_PROC_DEVSET(_name, _min, _max) \
+__IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)

-/*
- * /proc/ide interface
- */
typedef struct {
const char *name;
mode_t mode;
@@ -804,8 +875,6 @@ void ide_proc_unregister_port(ide_hwif_t *);
void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);

-void ide_add_generic_settings(ide_drive_t *);
-
read_proc_t proc_ide_read_capacity;
read_proc_t proc_ide_read_geometry;

@@ -833,7 +902,6 @@ static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
-static inline void ide_add_generic_settings(ide_drive_t *drive) { ; }
#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
#endif

@@ -879,7 +947,6 @@ enum {
struct ide_driver_s {
const char *version;
u8 media;
- unsigned supports_dsc_overlap : 1;
ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
int (*end_request)(ide_drive_t *, int, int);
ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
@@ -889,7 +956,8 @@ struct ide_driver_s {
void (*resume)(ide_drive_t *);
void (*shutdown)(ide_drive_t *);
#ifdef CONFIG_IDE_PROC_FS
- ide_proc_entry_t *proc;
+ ide_proc_entry_t *proc;
+ const struct ide_proc_devset *settings;
#endif
};

@@ -898,7 +966,17 @@ struct ide_driver_s {
int ide_device_get(ide_drive_t *);
void ide_device_put(ide_drive_t *);

-int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
+struct ide_ioctl_devset {
+ unsigned int get_ioctl;
+ unsigned int set_ioctl;
+ const struct ide_devset *setting;
+};
+
+int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
+ unsigned long, const struct ide_ioctl_devset *);
+
+int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *,
+ unsigned, unsigned long);

extern int ide_vlb_clk;
extern int ide_pci_clk;
@@ -920,14 +998,19 @@ ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);

ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);

-extern void ide_fix_driveid(struct hd_driveid *);
+void ide_fix_driveid(u16 *);

extern void ide_fixstring(u8 *, const int, const int);

+int ide_busy_sleep(ide_hwif_t *, unsigned long, int);
+
int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);

extern ide_startstop_t ide_do_reset (ide_drive_t *);

+extern int ide_devset_execute(ide_drive_t *drive,
+ const struct ide_devset *setting, int arg);
+
extern void ide_do_drive_cmd(ide_drive_t *, struct request *);

extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
@@ -1051,6 +1134,8 @@ void ide_tf_read(ide_drive_t *, ide_task_t *);
void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int);
void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int);

+int ide_io_buffers(ide_drive_t *, struct ide_atapi_pc *, unsigned int, int);
+
extern void SELECT_DRIVE(ide_drive_t *);
void SELECT_MASK(ide_drive_t *, int);

@@ -1061,11 +1146,36 @@ extern int drive_is_ready(ide_drive_t *);

void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);

+int ide_check_atapi_device(ide_drive_t *, const char *);
+
+void ide_init_pc(struct ide_atapi_pc *);
+
+/*
+ * Special requests for ide-tape block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
+ */
+enum {
+ REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
+ REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
+ REQ_IDETAPE_READ = (1 << 2),
+ REQ_IDETAPE_WRITE = (1 << 3),
+};
+
+void ide_queue_pc_head(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
+ struct request *);
+int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);
+
+int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
+int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
+int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
+
ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
- void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
+ int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
int));
ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
ide_handler_t *, unsigned int, ide_expiry_t *);
@@ -1080,8 +1190,6 @@ int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);

int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
-int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
-int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);

extern int ide_driveid_update(ide_drive_t *);
extern int ide_config_drive_speed(ide_drive_t *, u8);
@@ -1092,7 +1200,6 @@ extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);

extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);

-extern int ide_spin_wait_hwgroup(ide_drive_t *);
extern void ide_timer_expiry(unsigned long);
extern irqreturn_t ide_intr(int irq, void *dev_id);
extern void do_ide_request(struct request_queue *);
@@ -1229,6 +1336,14 @@ int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
const struct ide_port_info *, void *);
void ide_pci_remove(struct pci_dev *);

+#ifdef CONFIG_PM
+int ide_pci_suspend(struct pci_dev *, pm_message_t);
+int ide_pci_resume(struct pci_dev *);
+#else
+#define ide_pci_suspend NULL
+#define ide_pci_resume NULL
+#endif
+
void ide_map_sg(ide_drive_t *, struct request *);
void ide_init_sg_cmd(ide_drive_t *, struct request *);

@@ -1240,7 +1355,7 @@ struct drive_list_entry {
const char *id_firmware;
};

-int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
+int ide_in_drive_list(u16 *, const struct drive_list_entry *);

#ifdef CONFIG_BLK_DEV_IDEDMA
int __ide_dma_bad_drive(ide_drive_t *);
@@ -1347,24 +1462,6 @@ const char *ide_xfer_verbose(u8 mode);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);

-static inline int ide_dev_has_iordy(struct hd_driveid *id)
-{
- return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
-}
-
-static inline int ide_dev_is_sata(struct hd_driveid *id)
-{
- /*
- * See if word 93 is 0 AND drive is at least ATA-5 compatible
- * verifying that word 80 by casting it to a signed type --
- * this trick allows us to filter out the reserved values of
- * 0x0000 and 0xffff along with the earlier ATA revisions...
- */
- if (id->hw_config == 0 && (short)id->major_rev_num >= 0x0020)
- return 1;
- return 0;
-}
-
u64 ide_get_lba_addr(struct ide_taskfile *, int);
u8 ide_dump_status(ide_drive_t *, const char *, u8);

@@ -1436,13 +1533,6 @@ extern struct mutex ide_cfg_mtx;
extern struct bus_type ide_bus_type;
extern struct class *ide_port_class;

-/* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
-#define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
-
-/* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
-#define ide_id_has_flush_cache_ext(id) \
- (((id)->cfs_enable_2 & 0x2400) == 0x2400)
-
static inline void ide_dump_identify(u8 *id)
{
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
@@ -1453,10 +1543,10 @@ static inline int hwif_to_node(ide_hwif_t *hwif)
return hwif->dev ? dev_to_node(hwif->dev) : -1;
}

-static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
+static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
+ ide_drive_t *peer = &drive->hwif->drives[(drive->dn ^ 1) & 1];

- return &hwif->drives[(drive->dn ^ 1) & 1];
+ return peer->present ? peer : NULL;
}
#endif /* _IDE_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/