Now that the TIF_FREEZE flag is available in all architectures,
extract the refrigerator() and freeze_task() from kernel/power/process.c
and make it available to all.

The refrigerator() can now be used in a control group subsystem
implementing a control group freezer.

Signed-off-by: Cedric Le Goater
Signed-off-by: Matt Helsley
Acked-by: Serge E. Hallyn
Tested-by: Matt Helsley
---
include/linux/freezer.h | 14 ++++-
kernel/Makefile | 1
kernel/freezer.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++
kernel/power/Kconfig | 3 +
kernel/power/process.c | 116 ---------------------------------------------
5 files changed, 137 insertions(+), 119 deletions(-)
create mode 100644 kernel/freezer.c

Index: linux-2.6.27-rc1-mm1/include/linux/freezer.h
================================================== =================
--- linux-2.6.27-rc1-mm1.orig/include/linux/freezer.h
+++ linux-2.6.27-rc1-mm1/include/linux/freezer.h
@@ -6,7 +6,7 @@
#include
#include

-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_FREEZER
/*
* Check if a process has been frozen
*/
@@ -39,6 +39,11 @@ static inline void clear_freeze_flag(str
clear_tsk_thread_flag(p, TIF_FREEZE);
}

+static inline bool should_send_signal(struct task_struct *p)
+{
+ return !(p->flags & PF_FREEZER_NOSIG);
+}
+
/*
* Wake up a frozen process
*
@@ -75,6 +80,9 @@ static inline int try_to_freeze(void)
return 0;
}

+extern bool freeze_task(struct task_struct *p, bool sig_only);
+extern void cancel_freezing(struct task_struct *p);
+
/*
* The PF_FREEZER_SKIP flag should be set by a vfork parent right before it
* calls wait_for_completion(&vfork) and reset right after it returns from this
@@ -166,7 +174,7 @@ static inline void set_freezable_with_si
} while (try_to_freeze()); \
__retval; \
})
-#else /* !CONFIG_PM_SLEEP */
+#else /* !CONFIG_FREEZER */
static inline int frozen(struct task_struct *p) { return 0; }
static inline int freezing(struct task_struct *p) { return 0; }
static inline void set_freeze_flag(struct task_struct *p) {}
@@ -191,6 +199,6 @@ static inline void set_freezable_with_si
#define wait_event_freezable_timeout(wq, condition, timeout) \
wait_event_interruptible_timeout(wq, condition, timeout)

-#endif /* !CONFIG_PM_SLEEP */
+#endif /* !CONFIG_FREEZER */

#endif /* FREEZER_H_INCLUDED */
Index: linux-2.6.27-rc1-mm1/kernel/Makefile
================================================== =================
--- linux-2.6.27-rc1-mm1.orig/kernel/Makefile
+++ linux-2.6.27-rc1-mm1/kernel/Makefile
@@ -24,6 +24,7 @@ CFLAGS_REMOVE_sched_clock.o = -pg
CFLAGS_REMOVE_sched.o = -mno-spe -pg
endif

+obj-$(CONFIG_FREEZER) += freezer.o
obj-$(CONFIG_PROFILING) += profile.o
obj-$(CONFIG_SYSCTL_SYSCALL_CHECK) += sysctl_check.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
Index: linux-2.6.27-rc1-mm1/kernel/freezer.c
================================================== =================
--- /dev/null
+++ linux-2.6.27-rc1-mm1/kernel/freezer.c
@@ -0,0 +1,122 @@
+/*
+ * kernel/freezer.c - Function to freeze a process
+ *
+ * Originally from kernel/power/process.c
+ */
+
+#include
+#include
+#include
+#include
+#include
+
+/*
+ * freezing is complete, mark current process as frozen
+ */
+static inline void frozen_process(void)
+{
+ if (!unlikely(current->flags & PF_NOFREEZE)) {
+ current->flags |= PF_FROZEN;
+ wmb();
+ }
+ clear_freeze_flag(current);
+}
+
+/* Refrigerator is place where frozen processes are stored :-). */
+void refrigerator(void)
+{
+ /* Hmm, should we be allowed to suspend when there are realtime
+ processes around? */
+ long save;
+
+ task_lock(current);
+ if (freezing(current)) {
+ frozen_process();
+ task_unlock(current);
+ } else {
+ task_unlock(current);
+ return;
+ }
+ save = current->state;
+ pr_debug("%s entered refrigerator\n", current->comm);
+
+ spin_lock_irq(&current->sighand->siglock);
+ recalc_sigpending(); /* We sent fake signal, clean it up */
+ spin_unlock_irq(&current->sighand->siglock);
+
+ for (; {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ if (!frozen(current))
+ break;
+ schedule();
+ }
+ pr_debug("%s left refrigerator\n", current->comm);
+ __set_current_state(save);
+}
+EXPORT_SYMBOL(refrigerator);
+
+static void fake_signal_wake_up(struct task_struct *p)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&p->sighand->siglock, flags);
+ signal_wake_up(p, 0);
+ spin_unlock_irqrestore(&p->sighand->siglock, flags);
+}
+
+/**
+ * freeze_task - send a freeze request to given task
+ * @p: task to send the request to
+ * @sig_only: if set, the request will only be sent if the task has the
+ * PF_FREEZER_NOSIG flag unset
+ * Return value: 'false', if @sig_only is set and the task has
+ * PF_FREEZER_NOSIG set or the task is frozen, 'true', otherwise
+ *
+ * The freeze request is sent by setting the tasks's TIF_FREEZE flag and
+ * either sending a fake signal to it or waking it up, depending on whether
+ * or not it has PF_FREEZER_NOSIG set. If @sig_only is set and the task
+ * has PF_FREEZER_NOSIG set (ie. it is a typical kernel thread), its
+ * TIF_FREEZE flag will not be set.
+ */
+bool freeze_task(struct task_struct *p, bool sig_only)
+{
+ /*
+ * We first check if the task is freezing and next if it has already
+ * been frozen to avoid the race with frozen_process() which first marks
+ * the task as frozen and next clears its TIF_FREEZE.
+ */
+ if (!freezing(p)) {
+ rmb();
+ if (frozen(p))
+ return false;
+
+ if (!sig_only || should_send_signal(p))
+ set_freeze_flag(p);
+ else
+ return false;
+ }
+
+ if (should_send_signal(p)) {
+ if (!signal_pending(p))
+ fake_signal_wake_up(p);
+ } else if (sig_only) {
+ return false;
+ } else {
+ wake_up_state(p, TASK_INTERRUPTIBLE);
+ }
+
+ return true;
+}
+
+void cancel_freezing(struct task_struct *p)
+{
+ unsigned long flags;
+
+ if (freezing(p)) {
+ pr_debug(" clean up: %s\n", p->comm);
+ clear_freeze_flag(p);
+ spin_lock_irqsave(&p->sighand->siglock, flags);
+ recalc_sigpending_and_wake(p);
+ spin_unlock_irqrestore(&p->sighand->siglock, flags);
+ }
+}
Index: linux-2.6.27-rc1-mm1/kernel/power/process.c
================================================== =================
--- linux-2.6.27-rc1-mm1.orig/kernel/power/process.c
+++ linux-2.6.27-rc1-mm1/kernel/power/process.c
@@ -28,121 +28,6 @@ static inline int freezeable(struct task
return 1;
}

-/*
- * freezing is complete, mark current process as frozen
- */
-static inline void frozen_process(void)
-{
- if (!unlikely(current->flags & PF_NOFREEZE)) {
- current->flags |= PF_FROZEN;
- wmb();
- }
- clear_freeze_flag(current);
-}
-
-/* Refrigerator is place where frozen processes are stored :-). */
-void refrigerator(void)
-{
- /* Hmm, should we be allowed to suspend when there are realtime
- processes around? */
- long save;
-
- task_lock(current);
- if (freezing(current)) {
- frozen_process();
- task_unlock(current);
- } else {
- task_unlock(current);
- return;
- }
- save = current->state;
- pr_debug("%s entered refrigerator\n", current->comm);
-
- spin_lock_irq(&current->sighand->siglock);
- recalc_sigpending(); /* We sent fake signal, clean it up */
- spin_unlock_irq(&current->sighand->siglock);
-
- for (; {
- set_current_state(TASK_UNINTERRUPTIBLE);
- if (!frozen(current))
- break;
- schedule();
- }
- pr_debug("%s left refrigerator\n", current->comm);
- __set_current_state(save);
-}
-
-static void fake_signal_wake_up(struct task_struct *p)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&p->sighand->siglock, flags);
- signal_wake_up(p, 0);
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
-}
-
-static inline bool should_send_signal(struct task_struct *p)
-{
- return !(p->flags & PF_FREEZER_NOSIG);
-}
-
-/**
- * freeze_task - send a freeze request to given task
- * @p: task to send the request to
- * @sig_only: if set, the request will only be sent if the task has the
- * PF_FREEZER_NOSIG flag unset
- * Return value: 'false', if @sig_only is set and the task has
- * PF_FREEZER_NOSIG set or the task is frozen, 'true', otherwise
- *
- * The freeze request is sent by setting the tasks's TIF_FREEZE flag and
- * either sending a fake signal to it or waking it up, depending on whether
- * or not it has PF_FREEZER_NOSIG set. If @sig_only is set and the task
- * has PF_FREEZER_NOSIG set (ie. it is a typical kernel thread), its
- * TIF_FREEZE flag will not be set.
- */
-static bool freeze_task(struct task_struct *p, bool sig_only)
-{
- /*
- * We first check if the task is freezing and next if it has already
- * been frozen to avoid the race with frozen_process() which first marks
- * the task as frozen and next clears its TIF_FREEZE.
- */
- if (!freezing(p)) {
- rmb();
- if (frozen(p))
- return false;
-
- if (!sig_only || should_send_signal(p))
- set_freeze_flag(p);
- else
- return false;
- }
-
- if (should_send_signal(p)) {
- if (!signal_pending(p))
- fake_signal_wake_up(p);
- } else if (sig_only) {
- return false;
- } else {
- wake_up_state(p, TASK_INTERRUPTIBLE);
- }
-
- return true;
-}
-
-static void cancel_freezing(struct task_struct *p)
-{
- unsigned long flags;
-
- if (freezing(p)) {
- pr_debug(" clean up: %s\n", p->comm);
- clear_freeze_flag(p);
- spin_lock_irqsave(&p->sighand->siglock, flags);
- recalc_sigpending_and_wake(p);
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
- }
-}
-
static int try_to_freeze_tasks(bool sig_only)
{
struct task_struct *g, *p;
@@ -264,4 +149,3 @@ void thaw_processes(void)
printk("done.\n");
}

-EXPORT_SYMBOL(refrigerator);
Index: linux-2.6.27-rc1-mm1/kernel/power/Kconfig
================================================== =================
--- linux-2.6.27-rc1-mm1.orig/kernel/power/Kconfig
+++ linux-2.6.27-rc1-mm1/kernel/power/Kconfig
@@ -85,6 +85,9 @@ config PM_SLEEP
depends on SUSPEND || HIBERNATION || XEN_SAVE_RESTORE
default y

+config FREEZER
+ def_bool PM_SLEEP
+
config SUSPEND
bool "Suspend to RAM and standby"
depends on PM && ARCH_SUSPEND_POSSIBLE

--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/