Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf - Kernel

This is a discussion on Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf - Kernel ; Jesse, I am unclear on what you want to push. Are you referring to the mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch fixes that are already in -tip? These work fine in allowing MMCONFIG to work on my MacBook Pro and should go into ...

+ Reply to Thread
Results 1 to 6 of 6

Thread: Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

  1. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    Jesse,
    I am unclear on what you want to push. Are you referring
    to the mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch
    fixes that are already in -tip? These work fine in allowing MMCONFIG to work
    on my MacBook Pro and should go into the stable kernel. If you are talking
    about blacklisting pcie pre1.1 devices to solve the problems with ASPM,
    I really don't understand how I do that (in terms of finding out what devices
    to blacklist).
    Jack

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  2. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Tuesday, July 22, 2008 4:37 pm Jack Howarth wrote:
    > Jesse,
    > I am unclear on what you want to push. Are you referring
    > to the mmconf_end_bus_num_detect.patch and
    > mmconf_end_bus_num_detect_fix.patch fixes that are already in -tip? These
    > work fine in allowing MMCONFIG to work on my MacBook Pro and should go into
    > the stable kernel. If you are talking about blacklisting pcie pre1.1
    > devices to solve the problems with ASPM, I really don't understand how I do
    > that (in terms of finding out what devices to blacklist).


    I was referring to the ASPM patch. You reported that you needed to disable
    ASPM in order to boot without hanging, right? I just wanted to make sure
    that Shaohua's patch allowed you to do that with ASPM=y.

    Thanks,
    Jesse
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  3. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    Jesse,
    I found that patch right after I sent the email. Applying the ASPM
    patch solves the boot hangs on under 2.6.26-git9 built with
    CONFIG_PCIEASPM=y. I am attaching the dmesg log for such a boot
    below. I am a little confused if the patch totally disables aspm on
    my machine or just inhibits the hang. Is there a proc entry I can check
    to monitor that aspm is in use?
    Jack

    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.27-0.159.rc0.git9.fc9.x86_64 (howarth@localhost.localdomain) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue Jul 22 19:47:49 EDT 2008
    Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable)
    BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS)
    BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data)
    BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
    BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
    BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    init_memory_mapping
    0000000000 - 00bf000000 page 2M
    00bf000000 - 00bf0e9000 page 4k
    kernel direct mapping tables up to bf0e9000 @ 8000-d000
    last_map_addr: bf0e9000 end: bf0e9000
    RAMDISK: 37d35000 - 37fef6a9
    DMI 2.4 present.
    ACPI: RSDP 000FE020, 0024 (r2 APPLE )
    ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
    ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
    ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309)
    ACPI: FACS BFEC0000, 0040
    ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
    ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
    ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
    ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
    ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
    ACPI: DMI detected: Apple
    No NUMA configuration found
    Faking a node at 0000000000000000-00000000bf0e9000
    Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
    Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used
    Bootmem setup node 0 0000000000000000-00000000bf0e9000
    NODE_DATA [000000000000b000 - 000000000001ffff]
    bootmap [0000000000020000 - 0000000000037e1f] pages 18
    (6 early reservations) ==> bootmem [0000000000 - 00bf0e9000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 0000e64168] TEXT DATA BSS ==> [0000200000 - 0000e64168]
    #3 [0037d35000 - 0037fef6a9] RAMDISK ==> [0037d35000 - 0037fef6a9]
    #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
    Scan SMP from ffff880000000000 for 1024 bytes.
    Scan SMP from ffff88000009fc00 for 1024 bytes.
    Scan SMP from ffff8800000f0000 for 65536 bytes.
    Scan SMP from ffff88000009fc00 for 1024 bytes.
    [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00100000
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bf0e9
    On node 0 totalpages: 782472
    DMA zone: 96 pages used for memmap
    DMA zone: 3274 pages reserved
    DMA zone: 629 pages, LIFO batch:0
    DMA32 zone: 18246 pages used for memmap
    DMA32 zone: 760227 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
    PERCPU: Allocating 442304 bytes of per cpu data
    NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 760856
    Policy zone: DMA32
    Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    TSC calibrated against PM_TIMER
    Detected 2327.506 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    .... MAX_LOCKDEP_SUBCLASSES: 8
    .... MAX_LOCK_DEPTH: 48
    .... MAX_LOCKDEP_KEYS: 2048
    .... CLASSHASH_SIZE: 1024
    .... MAX_LOCKDEP_ENTRIES: 8192
    .... MAX_LOCKDEP_CHAINS: 16384
    .... CHAINHASH_SIZE: 8192
    memory used by lock dependency info: 1840 kB
    per task-struct memory footprint: 3456 bytes
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3039248k/3130276k available (3110k kernel code, 90640k reserved, 1750k data, 1548k init)
    CPA: page pool initialized 48 of 48 pages preallocated
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    hpet clockevent registered
    Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4655.01 BogoMIPS (lpj=2327506)
    Security Framework initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys devices
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 0/0 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20080609
    ...TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
    Using local APIC timer interrupts.
    APIC timer calibration result 10390648
    Detected 10.390 MHz APIC timer.
    lockdep: fixing up alternatives.
    Booting processor 1/1 ip 6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. <6>4654.79 BogoMIPS (lpj=2327397)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 1/1 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (9309.80 BogoMIPS).
    sizeof(vma)=176 bytes
    sizeof(page)=96 bytes
    sizeof(inode)=1088 bytes
    sizeof(dentry)=256 bytes
    sizeof(ext3inode)=1488 bytes
    sizeof(buffer_head)=104 bytes
    sizeof(skbuff)=232 bytes
    sizeof(task_struct)=9528 bytes
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    khelper used greatest stack depth: 5664 bytes left
    net_namespace: 1576 bytes
    Booting paravirtualized kernel on bare hardware
    Time: 0:51:49 Date: 07/23/08
    NET: Registered protocol family 16
    No dock devices found.
    khelper used greatest stack depth: 4872 bytes left
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
    PCI: MCFG area at f0000000 reserved in E820
    PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
    PCI: Using MMCONFIG at f0000000 - f3ffffff
    PCI: Using configuration type 1 for base access
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    pci 0000:02:00.0: supports D1
    pci 0000:02:00.0: supports D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:03:00.0: supports D1
    pci 0000:03:00.0: PME# supported from D0 D1 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:0c:03.0: supports D1
    pci 0000:0c:03.0: supports D2
    pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:0c:03.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 9 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    PCI-GART: No AMD northbridge found.
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    tracer: 1286 pages allocated for 65536 entries of 80 bytes
    actual entries 65586
    ACPI: RTC can wake from S4
    system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
    system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
    system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
    system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
    system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:07: ioport range 0x680-0x6ef has been reserved
    system 00:07: ioport range 0x800-0x80f has been reserved
    system 00:07: ioport range 0x810-0x817 has been reserved
    system 00:07: ioport range 0x400-0x47f has been reserved
    system 00:07: ioport range 0x500-0x53f has been reserved
    system 00:07: ioport range 0x1640-0x164f has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x3000-0x3fff
    pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: 0x2000-0x2fff
    pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff
    pci 0000:00:1c.0: PREFETCH window: 0x000000d8500000-0x000000d85fffff
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: disabled
    pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
    pci 0000:00:1c.2: IO window: 0x1000-0x1fff
    pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff
    pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d3ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
    pci 0000:00:1e.0: IO window: disabled
    pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff
    pci 0000:00:1e.0: PREFETCH window: disabled
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    pci 0000:00:1e.0: power state changed by ACPI to D0
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    it is
    debug: unmapping init memory ffff880037d35000..ffff880037ff0000
    audit: initializing netlink socket (disabled)
    type=2000 audit(1216774309.732:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 5936
    SELinux: Registering netfilter hooks
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
    pci 0000:00:1d.0: Performing full reset
    pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.1: Performing full reset
    pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.2: Performing full reset
    pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.3: Performing full reset
    pci 0000:01:00.0: Boot video device
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    pcieport-driver 0000:00:01.0: found MSI capability
    pci_express 0000:00:01.0cie00: allocate port service
    pci_express 0000:00:01.0cie03: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    pcieport-driver 0000:00:1c.0: found MSI capability
    pci_express 0000:00:1c.0cie00: allocate port service
    pci_express 0000:00:1c.0cie02: allocate port service
    pci_express 0000:00:1c.0cie03: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    pcieport-driver 0000:00:1c.1: found MSI capability
    pci_express 0000:00:1c.1cie00: allocate port service
    pci_express 0000:00:1c.1cie02: allocate port service
    pci_express 0000:00:1c.1cie03: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    pcieport-driver 0000:00:1c.2: found MSI capability
    pci_express 0000:00:1c.2cie00: allocate port service
    pci_express 0000:00:1c.2cie02: allocate port service
    pci_express 0000:00:1c.2cie03: allocate port service
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID0]
    input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    ACPI: Power Button (CM) [PWRB]
    input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
    ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
    ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    hpet_resources: 0xfed00000 is busy
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    brd: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input4
    Driver 'sd' needs updating - please use bus_type methods
    PNP: No PS/2 controller found. Probing ports directly.
    i8042.c: No controller found.
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    cpuidle: using governor ladder
    cpuidle: using governor menu
    Marking TSC unstable due to TSC halts in idle
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    TCP cubic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 17
    registered taskstats version 1
    Magic number: 0:71:861
    debug: unmapping init memory ffffffff814ef000..ffffffff81672000
    Write protecting the kernel read-only data: 1376k
    ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file 'devices'
    drivers/usb/core/inode.c: creating file '001'
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
    ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: default language 0x0409
    usb usb1: uevent
    usb usb1: usb_probe_device
    usb usb1: configuration #1 chosen from 1 choice
    usb usb1: adding 1-0:1.0 (config #1, interface 0)
    usb 1-0:1.0: uevent
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: no power switching (usb 1.0)
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: power on to power good time: 20ms
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 2: status 0501 change 0001
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 4: status 0501 change 0001
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 6: status 0501 change 0001
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 7: status 0501 change 0001
    hub 1-0:1.0: state 7 ports 8 chg 00d4 evt 0000
    drivers/usb/core/inode.c: creating file '001'
    hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.27-0.159.rc0.git9.fc9.x86_64 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    modprobe used greatest stack depth: 3472 bytes left
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd: block sizes: ed 80 td 96
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '002'
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: detected 2 ports
    uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.0: Performing full reset
    uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    usb usb2: default language 0x0409
    usb usb2: uevent
    usb usb2: usb_probe_device
    usb usb2: configuration #1 chosen from 1 choice
    usb usb2: adding 2-0:1.0 (config #1, interface 0)
    usb 2-0:1.0: uevent
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: no power switching (usb 1.0)
    hub 2-0:1.0: individual port over-current protection
    hub 2-0:1.0: power on to power good time: 2ms
    hub 2-0:1.0: local power source is good
    hub 2-0:1.0: trying to enable port power on non-switchable hub
    Clocksource tsc unstable (delta = -452396461 ns)
    ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 2 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
    uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
    hub 2-0:1.0: port 2: status 0101 change 0003
    ehci_hcd 0000:00:1d.7: port 4 high speed
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    usb 1-4: new high speed USB device using ehci_hcd and address 3
    drivers/usb/core/inode.c: creating file '001'
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.27-0.159.rc0.git9.fc9.x86_64 uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '003'
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: detected 2 ports
    uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.1: Performing full reset
    uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    usb usb3: default language 0x0409
    usb usb3: uevent
    usb usb3: usb_probe_device
    usb usb3: configuration #1 chosen from 1 choice
    usb usb3: adding 3-0:1.0 (config #1, interface 0)
    usb 3-0:1.0: uevent
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: no power switching (usb 1.0)
    hub 3-0:1.0: individual port over-current protection
    hub 3-0:1.0: power on to power good time: 2ms
    hub 3-0:1.0: local power source is good
    hub 3-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: port 4 high speed
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    usb 1-4: uevent
    usb 1-4: usb_probe_device
    usb 1-4: configuration #1 chosen from 1 choice
    usb 1-4: adding 1-4:1.0 (config #1, interface 0)
    usb 1-4:1.0: uevent
    drivers/usb/core/inode.c: creating file '003'
    usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
    usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
    uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
    ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 6 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
    hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
    drivers/usb/core/inode.c: creating file '001'
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.27-0.159.rc0.git9.fc9.x86_64 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '004'
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: detected 2 ports
    uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.2: Performing full reset
    uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    usb usb4: default language 0x0409
    usb usb4: uevent
    usb usb4: usb_probe_device
    usb usb4: configuration #1 chosen from 1 choice
    usb usb4: adding 4-0:1.0 (config #1, interface 0)
    usb 4-0:1.0: uevent
    hub 4-0:1.0: usb_probe_interface
    hub 4-0:1.0: usb_probe_interface - got id
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    hub 4-0:1.0: standalone hub
    hub 4-0:1.0: no power switching (usb 1.0)
    hub 4-0:1.0: individual port over-current protection
    hub 4-0:1.0: power on to power good time: 2ms
    hub 4-0:1.0: local power source is good
    hub 4-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 7 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
    hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
    hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0000
    hub 2-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
    uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
    hub 4-0:1.0: port 2: status 0101 change 0003
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    drivers/usb/core/inode.c: creating file '001'
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.27-0.159.rc0.git9.fc9.x86_64 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '005'
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: detected 2 ports
    uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.3: Performing full reset
    uhci_hcd 0000:00:1d.3: supports USB remote wakeup
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    usb usb5: default language 0x0409
    usb usb5: uevent
    usb usb5: usb_probe_device
    usb usb5: configuration #1 chosen from 1 choice
    usb usb5: adding 5-0:1.0 (config #1, interface 0)
    usb 5-0:1.0: uevent
    hub 5-0:1.0: usb_probe_interface
    hub 5-0:1.0: usb_probe_interface - got id
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    hub 5-0:1.0: standalone hub
    hub 5-0:1.0: no power switching (usb 1.0)
    hub 5-0:1.0: individual port over-current protection
    hub 5-0:1.0: power on to power good time: 2ms
    hub 5-0:1.0: local power source is good
    hub 5-0:1.0: trying to enable port power on non-switchable hub
    uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
    hub 5-0:1.0: port 1: status 0101 change 0003
    usb 2-2: ep0 maxpacket = 8
    usb 2-2: USB quirks for this device: 2
    usb 2-2: skipped 1 descriptor after interface
    usb 2-2: skipped 1 descriptor after interface
    usb 2-2: skipped 1 descriptor after interface
    usb 2-2: default language 0x0409
    usb 2-2: uevent
    usb 2-2: usb_probe_device
    usb 2-2: configuration #1 chosen from 1 choice
    usb 2-2: adding 2-2:1.0 (config #1, interface 0)
    usb 2-2:1.0: uevent
    usbhid 2-2:1.0: usb_probe_interface
    usbhid 2-2:1.0: usb_probe_interface - got id
    input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us
    input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
    usb 2-2: adding 2-2:1.1 (config #1, interface 1)
    usb 2-2:1.1: uevent
    usbhid 2-2:1.1: usb_probe_interface
    usbhid 2-2:1.1: usb_probe_interface - got id
    usb 2-2: adding 2-2:1.2 (config #1, interface 2)
    usb 2-2:1.2: uevent
    usbhid 2-2:1.2: usb_probe_interface
    usbhid 2-2:1.2: usb_probe_interface - got id
    input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us
    input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
    drivers/usb/core/inode.c: creating file '002'
    usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
    usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: Apple Internal Keyboard / Trackpad
    usb 2-2: Manufacturer: Apple Computer
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 4-0:1.0: state 7 ports 2 chg 0004 evt 0000
    hub 4-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
    drivers/usb/core/inode.c: creating file '001'
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.27-0.159.rc0.git9.fc9.x86_64 uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.3
    ata_piix 0000:00:1f.1: version 2.12
    ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    usb 4-2: new full speed USB device using uhci_hcd and address 2
    ata1.00: ATAPI: MAT****ADVD-R UJ-85J, FAV1, max UDMA/66
    ata1.00: configured for UDMA/66
    usb 4-2: ep0 maxpacket = 8
    usb 4-2: skipped 1 descriptor after interface
    usb 4-2: default language 0x0409
    usb 4-2: uevent
    usb 4-2: usb_probe_device
    usb 4-2: configuration #1 chosen from 1 choice
    usb 4-2: adding 4-2:1.0 (config #1, interface 0)
    usb 4-2:1.0: uevent
    usbhid 4-2:1.0: usb_probe_interface
    usbhid 4-2:1.0: usb_probe_interface - got id
    drivers/usb/core/file.c: looking for a minor, starting at 96
    hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
    drivers/usb/core/inode.c: creating file '002'
    usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
    usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 4-2: Product: IR Receiver
    usb 4-2: Manufacturer: Apple Computer, Inc.
    hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000
    hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
    isa bounce pool size: 16 pages
    scsi 0:0:0:0: CD-ROM MAT****A DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5
    scsi 0:0:0:0: Attached scsi generic sg0 type 5
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
    usb 5-1: new full speed USB device using uhci_hcd and address 2
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    usb 5-1: skipped 1 descriptor after interface
    usb 5-1: skipped 1 descriptor after interface
    usb 5-1: uevent
    usb 5-1: usb_probe_device
    usb 5-1: configuration #1 chosen from 1 choice
    usb 5-1: adding 5-1:1.0 (config #1, interface 0)
    usb 5-1:1.0: uevent
    usbhid 5-1:1.0: usb_probe_interface
    usbhid 5-1:1.0: usb_probe_interface - got id
    input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
    input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
    usb 5-1: adding 5-1:1.1 (config #1, interface 1)
    usb 5-1:1.1: uevent
    usbhid 5-1:1.1: usb_probe_interface
    usbhid 5-1:1.1: usb_probe_interface - got id
    input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8
    input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
    drivers/usb/core/inode.c: creating file '002'
    usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
    usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
    usb usb3: suspend_rh (auto-stop)
    ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100
    ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4)
    ata3.01: configured for UDMA/100
    scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
    sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    sd 2:0:1:0: [sda] Write Protect is off
    sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    sd 2:0:1:0: [sda] Write Protect is off
    sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 sda5
    sd 2:0:1:0: [sda] Attached SCSI disk
    sd 2:0:1:0: Attached scsi generic sg1 type 0
    modprobe used greatest stack depth: 2304 bytes left
    hub 3-0:1.0: hub_suspend
    usb usb3: bus auto-suspend
    usb usb3: suspend_rh
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    type=1404 audit(1216774317.677:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
    SELinux: 8192 avtab hash slots, 171021 rules.
    SELinux: 8192 avtab hash slots, 171021 rules.
    SELinux: 8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats
    SELinux: 72 classes, 171021 rules
    SELinux: permission open in class dir not defined in policy
    SELinux: permission open in class file not defined in policy
    SELinux: permission open in class chr_file not defined in policy
    SELinux: permission open in class blk_file not defined in policy
    SELinux: permission open in class fifo_file not defined in policy
    SELinux: the above unknown classes and permissions will be allowed
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev sda5, type ext3), uses xattr
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    type=1403 audit(1216774318.525:3): policy loaded auid=4294967295 ses=4294967295
    usb usb2: uevent
    usb 2-0:1.0: uevent
    usb 2-2: uevent
    usb 2-2:1.0: uevent
    usb 2-2:1.1: uevent
    usb 2-2:1.2: uevent
    usb usb3: uevent
    usb 3-0:1.0: uevent
    usb usb4: uevent
    usb 4-0:1.0: uevent
    usb 4-2: uevent
    usb 4-2:1.0: uevent
    usb usb5: uevent
    usb 5-0:1.0: uevent
    usb 5-1: uevent
    usb 5-1:1.0: uevent
    usb 5-1:1.1: uevent
    usb usb1: uevent
    usb 1-0:1.0: uevent
    usb 1-4: uevent
    usb 1-4:1.0: uevent
    appletouch 2-2:1.1: usb_probe_interface
    appletouch 2-2:1.1: usb_probe_interface - got id
    appletouch: Geyser mode initialized.
    input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9
    usbcore: registered new interface driver appletouch
    isight_firmware 1-4:1.0: usb_probe_interface
    isight_firmware 1-4:1.0: usb_probe_interface - got id
    firmware: requesting isight.fw
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    sky2 0000:02:00.0: v1.22 addr 0xd8200000 irq 16 Yukon-2 EC rev 2
    sky2 eth0: addr 00:17:f2:d1:e0:6f
    intel_rng: FWH not detected
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: AC Adapter [ADP1] (on-line)
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input10
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    input: PC Speaker as /devices/platform/pcspkr/input/input11
    iTCO_vendor_support: vendor-support=0
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
    ACPI: Device needs an ACPI driver
    firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Unable to load isight firmware
    usbcore: registered new interface driver isight_firmware
    firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800
    ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
    ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17
    Error: Driver 'pcspkr' is already registered, aborting...
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ALSA sound/pci/hda/hda_intel.c:2069: chipset global capabilities = 0x4401
    ALSA sound/pci/hda/hda_intel.c:754: codec_mask = 0x1
    ALSA sound/pci/hda/hda_codec.c:2350: hda_codec: model 'intel-mac-v3' is selected for config 8384:7680 (Mac Mini)
    hda_codec: STAC922x, Apple subsys_id=106b1a00
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 0a pin config 0321e21f
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 0b pin config 03a1e02e
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 0c pin config 9017e110
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 0d pin config 9017e11f
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 0e pin config 400000fe
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 0f pin config 0381e020
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 10 pin config 1345e230
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 11 pin config 13c5e240
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 15 pin config 400000fc
    ALSA sound/pci/hda/patch_sigmatel.c:1840: hda_codec: pin nid 1b pin config 400000fb
    ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=2 (0xc/0xd/0x0/0x0/0x0)
    ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
    ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
    ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0xb, fmic=0x0, line=0xf, fline=0x0, cd=0x0, aux=0x0
    ALSA sound/pci/hda/patch_sigmatel.c:2249: stac92xx_add_dyn_out_pins: total dac count=4
    ALSA sound/pci/hda/patch_sigmatel.c:2371: dac_nids=4 (0x3/0x2/0x5/0x4/0x0)
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave External Speaker Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker2 Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave External Speaker Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker2 Playback Switch, skipped
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    [drm] Initialized radeon 1.29.0 20080528 on minor 0
    [drm] Setting GART location based on new memory map
    [drm] Loading R500 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 1 usecs
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    device-mapper: multipath: version 1.0.5 loaded
    EXT3 FS on sda5, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda3, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    IA-32 Microcode Update Driver: v1.14a
    firmware: requesting intel-ucode/06-0f-06
    firmware: requesting intel-ucode/06-0f-06
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
    nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    ip_tables: (C) 2000-2006 Netfilter Core Team
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
    fuse init (API version 7.9)
    SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
    usb usb3: usb auto-resume
    usb usb3: wakeup_rh
    hub 3-0:1.0: hub_resume
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    usb usb3: suspend_rh (auto-stop)
    uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us
    uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us
    hub 3-0:1.0: hub_suspend
    usb usb3: bus auto-suspend
    usb usb3: suspend_rh
    Bluetooth: Core ver 2.12
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.10
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.10
    Bluetooth: BNEP (Ethernet Emulation) ver 1.2
    Bluetooth: BNEP filters: protocol multicast
    Bridge firewalling registered
    pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    [drm] Num pipes: 1
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    [drm] Setting GART location based on new memory map
    [drm] Loading R500 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 1 usecs
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    ath0: no IPv6 routers present
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x1, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x1, channel=0, format=0x4011
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
    ACPI: EC: GPE storm detected, disabling EC GPE
    appletouch: 17" model detected.
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x1, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x1, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
    SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_intel.c:1390: azx_pcm_prepare: bufsize=0x4400, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
    ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
    ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  4. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Tuesday, July 22, 2008 6:00 pm Jack Howarth wrote:
    > Jesse,
    > I found that patch right after I sent the email. Applying the ASPM
    > patch solves the boot hangs on under 2.6.26-git9 built with
    > CONFIG_PCIEASPM=y. I am attaching the dmesg log for such a boot
    > below. I am a little confused if the patch totally disables aspm on
    > my machine or just inhibits the hang. Is there a proc entry I can check
    > to monitor that aspm is in use?


    It should disable ASPM on pre-1.1 PCIe devices, since apparently many of them
    get ASPM wrong, resulting in bus hangs. There's a file in sysfs to control
    things:
    /sys/module/pcie_aspm/parameters/policy
    (see the description in 7d715a6c1ae5785d00fb9a876b5abdfc43abc44b for info).

    With the patch applied hopefully it indicates that things are disabled.

    Thanks for testing.

    Jesse
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  5. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    Jesse,
    The file /sys/module/pcie_aspm/parameters/policy
    shows...

    [default] performance powersave

    Reading the original patch, I don't quite see how it would
    show the aspm as disabled. I would think the current ASPM
    fix patch should be modified to output a kernel message that
    ASPM is being disabled because of pre-1.1 PCIe devices
    when it does that (assuming it is disabling across the
    board and not just for a specific device on the bus).
    Jack

    On Tue, Jul 22, 2008 at 06:32:20PM -0700, Jesse Barnes wrote:
    > On Tuesday, July 22, 2008 6:00 pm Jack Howarth wrote:
    > > Jesse,
    > > I found that patch right after I sent the email. Applying the ASPM
    > > patch solves the boot hangs on under 2.6.26-git9 built with
    > > CONFIG_PCIEASPM=y. I am attaching the dmesg log for such a boot
    > > below. I am a little confused if the patch totally disables aspm on
    > > my machine or just inhibits the hang. Is there a proc entry I can check
    > > to monitor that aspm is in use?

    >
    > It should disable ASPM on pre-1.1 PCIe devices, since apparently many of them
    > get ASPM wrong, resulting in bus hangs. There's a file in sysfs to control
    > things:
    > /sys/module/pcie_aspm/parameters/policy
    > (see the description in 7d715a6c1ae5785d00fb9a876b5abdfc43abc44b for info).
    >
    > With the patch applied hopefully it indicates that things are disabled.
    >
    > Thanks for testing.
    >
    > Jesse

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  6. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Tue, 2008-07-22 at 21:41 -0400, Jack Howarth wrote:
    > Jesse,
    > The file /sys/module/pcie_aspm/parameters/policy
    > shows...
    >
    > [default] performance powersave

    you can observe a sysfs file 'link_state' under a pci root port.
    /sys/device/...pcixxx/power/link_state.
    if there is no such file for the port, then aspm is disabled for the
    port.

    > Reading the original patch, I don't quite see how it would
    > show the aspm as disabled. I would think the current ASPM
    > fix patch should be modified to output a kernel message that
    > ASPM is being disabled because of pre-1.1 PCIe devices
    > when it does that (assuming it is disabling across the
    > board and not just for a specific device on the bus).

    ok, I'll do this.

    Thanks,
    SHaohua

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

+ Reply to Thread