[PATCH] x86,pci: dmi check for mackpro 2.2 mmconf - Kernel

This is a discussion on [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf - Kernel ; change the mconf bus range from [0,0xff] to to [0, 0x3f] to match range [0xf0000000, 0xf4000000) in e820 tables. Signed-off-by: Yinghai Lu Tested-by: Jack Howarth --- arch/x86/pci/mmconfig-shared.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) Index: linux-2.6/arch/x86/pci/mmconfig-shared.c ================================================== ================= --- ...

+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 31

Thread: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

  1. [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf


    change the mconf bus range from [0,0xff] to to [0, 0x3f]
    to match range [0xf0000000, 0xf4000000) in e820 tables.

    Signed-off-by: Yinghai Lu
    Tested-by: Jack Howarth

    ---
    arch/x86/pci/mmconfig-shared.c | 35 +++++++++++++++++++++++++++++++++++
    1 file changed, 35 insertions(+)

    Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
    ================================================== =================
    --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
    +++ linux-2.6/arch/x86/pci/mmconfig-shared.c
    @@ -374,6 +374,40 @@ reject:

    static int __initdata known_bridge;

    +static int __devinit check_mmconf(const struct dmi_system_id *d)
    +{
    + typeof(pci_mmcfg_config[0]) *cfg;
    +
    + if ((pci_mmcfg_config_num != 1) ||
    + (pci_mmcfg_config == NULL) ||
    + (pci_mmcfg_config[0].address == 0))
    + return 1;
    +
    + cfg = &pci_mmcfg_config[0];
    +
    + if (cfg->start_bus_number == 0 && cfg->end_bus_number > 0x3f)
    + cfg->end_bus_number = 0x3f;
    +
    + return 0;
    +}
    +
    +static struct dmi_system_id __devinitdata mmconf_dmi_table[] = {
    + {
    + .callback = check_mmconf,
    + .ident = "Apple",
    + .matches = {
    + DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
    + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2"),
    + },
    + },
    + {}
    +};
    +
    +void __init check_mmconf_dmi(void)
    +{
    + dmi_check_system(mmconf_dmi_table);
    +}
    +
    static void __init __pci_mmcfg_init(int early)
    {
    /* MMCONFIG disabled */
    @@ -395,6 +429,7 @@ static void __init __pci_mmcfg_init(int

    if (!known_bridge) {
    acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
    + check_mmconf_dmi();
    pci_mmcfg_reject_broken(early);
    }

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  2. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    YH,
    Just filed a radar bug report with Apple as ID 6086072 entitled
    "BIOS in MacBook Pro 1.5.1 update is buggy - reports too many buses".
    Pointed them to the thread here and the messages with the patch,
    the earlydump and 'lspci --vvxxxx' logs.
    Jack


    On Fri, Jul 18, 2008 at 09:41:09AM -0700, Yinghai Lu wrote:
    >
    > change the mconf bus range from [0,0xff] to to [0, 0x3f]
    > to match range [0xf0000000, 0xf4000000) in e820 tables.
    >
    > Signed-off-by: Yinghai Lu
    > Tested-by: Jack Howarth
    >
    > ---
    > arch/x86/pci/mmconfig-shared.c | 35 +++++++++++++++++++++++++++++++++++
    > 1 file changed, 35 insertions(+)
    >
    > Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
    > ================================================== =================
    > --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
    > +++ linux-2.6/arch/x86/pci/mmconfig-shared.c
    > @@ -374,6 +374,40 @@ reject:
    >
    > static int __initdata known_bridge;
    >
    > +static int __devinit check_mmconf(const struct dmi_system_id *d)
    > +{
    > + typeof(pci_mmcfg_config[0]) *cfg;
    > +
    > + if ((pci_mmcfg_config_num != 1) ||
    > + (pci_mmcfg_config == NULL) ||
    > + (pci_mmcfg_config[0].address == 0))
    > + return 1;
    > +
    > + cfg = &pci_mmcfg_config[0];
    > +
    > + if (cfg->start_bus_number == 0 && cfg->end_bus_number > 0x3f)
    > + cfg->end_bus_number = 0x3f;
    > +
    > + return 0;
    > +}
    > +
    > +static struct dmi_system_id __devinitdata mmconf_dmi_table[] = {
    > + {
    > + .callback = check_mmconf,
    > + .ident = "Apple",
    > + .matches = {
    > + DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
    > + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2"),
    > + },
    > + },
    > + {}
    > +};
    > +
    > +void __init check_mmconf_dmi(void)
    > +{
    > + dmi_check_system(mmconf_dmi_table);
    > +}
    > +
    > static void __init __pci_mmcfg_init(int early)
    > {
    > /* MMCONFIG disabled */
    > @@ -395,6 +429,7 @@ static void __init __pci_mmcfg_init(int
    >
    > if (!known_bridge) {
    > acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
    > + check_mmconf_dmi();
    > pci_mmcfg_reject_broken(early);
    > }
    >

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  3. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    Yinghai Lu wrote:
    > change the mconf bus range from [0,0xff] to to [0, 0x3f]
    > to match range [0xf0000000, 0xf4000000) in e820 tables.
    >
    > Signed-off-by: Yinghai Lu
    > Tested-by: Jack Howarth


    Why is this hard-coded instead of discovered dynamically?

    -hpa
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  4. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Fri, Jul 18, 2008 at 10:44 AM, H. Peter Anvin wrote:
    > Yinghai Lu wrote:
    >>
    >> change the mconf bus range from [0,0xff] to to [0, 0x3f]
    >> to match range [0xf0000000, 0xf4000000) in e820 tables.
    >>
    >> Signed-off-by: Yinghai Lu
    >> Tested-by: Jack Howarth

    >
    > Why is this hard-coded instead of discovered dynamically?


    you mean according to the range reserved in e820 to find out bus range
    that should be used for mmconf?

    YH
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  5. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    Yinghai Lu wrote:
    > On Fri, Jul 18, 2008 at 10:44 AM, H. Peter Anvin wrote:
    >> Yinghai Lu wrote:
    >>> change the mconf bus range from [0,0xff] to to [0, 0x3f]
    >>> to match range [0xf0000000, 0xf4000000) in e820 tables.
    >>>
    >>> Signed-off-by: Yinghai Lu
    >>> Tested-by: Jack Howarth

    >> Why is this hard-coded instead of discovered dynamically?

    >
    > you mean according to the range reserved in e820 to find out bus range
    > that should be used for mmconf?


    That would make sense, since you're truncating the mmconf range based on
    some arbitrary limit. Even better would be to query the hardware
    register which is responsible for the truncation.

    -hpa
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  6. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Fri, Jul 18, 2008 at 10:49 AM, H. Peter Anvin wrote:
    > Yinghai Lu wrote:
    >>
    >> On Fri, Jul 18, 2008 at 10:44 AM, H. Peter Anvin wrote:
    >>>
    >>> Yinghai Lu wrote:
    >>>>
    >>>> change the mconf bus range from [0,0xff] to to [0, 0x3f]
    >>>> to match range [0xf0000000, 0xf4000000) in e820 tables.
    >>>>
    >>>> Signed-off-by: Yinghai Lu
    >>>> Tested-by: Jack Howarth
    >>>
    >>> Why is this hard-coded instead of discovered dynamically?

    >>
    >> you mean according to the range reserved in e820 to find out bus range
    >> that should be used for mmconf?

    >
    > That would make sense, since you're truncating the mmconf range based on
    > some arbitrary limit. Even better would be to query the hardware register
    > which is responsible for the truncation.


    OK

    will rework pci_mmcfg_reject_broken to
    reduce size and check with is_acpi_reserved/e820_mapped to update end_bus_number

    YH
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  7. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf


    * Yinghai Lu wrote:

    > change the mconf bus range from [0,0xff] to to [0, 0x3f] to match
    > range [0xf0000000, 0xf4000000) in e820 tables.
    >
    > Signed-off-by: Yinghai Lu
    > Tested-by: Jack Howarth


    great find!

    If you can think of further debug mechanisms in the kernel to make the
    fixing of similar problems easier, feel free ... The easier it is for
    users to track down such problems the better for Linux in general.

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  8. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Fri, Jul 18, 2008 at 1:19 PM, Ingo Molnar wrote:
    >
    > * Yinghai Lu wrote:
    >
    >> > That would make sense, since you're truncating the mmconf range
    >> > based on some arbitrary limit. Even better would be to query the
    >> > hardware register which is responsible for the truncation.

    >>
    >> OK
    >>
    >> will rework pci_mmcfg_reject_broken to reduce size and check with
    >> is_acpi_reserved/e820_mapped to update end_bus_number

    >
    > should we apply your current patch (because that is what got tested by
    > Jack), with a followup patch - or would you like to send a new patch
    > from scratch?


    will send one new patch replace this in seconds.

    YH
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  9. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Fri, Jul 18, 2008 at 1:21 PM, Ingo Molnar wrote:
    >
    > * Yinghai Lu wrote:
    >
    >> change the mconf bus range from [0,0xff] to to [0, 0x3f] to match
    >> range [0xf0000000, 0xf4000000) in e820 tables.
    >>
    >> Signed-off-by: Yinghai Lu
    >> Tested-by: Jack Howarth

    >
    > great find!
    >
    > If you can think of further debug mechanisms in the kernel to make the
    > fixing of similar problems easier, feel free ... The easier it is for
    > users to track down such problems the better for Linux in general.
    >


    [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved
    is more smart to address hpa's request.

    YH
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  10. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf


    * Yinghai Lu wrote:

    > > That would make sense, since you're truncating the mmconf range
    > > based on some arbitrary limit. Even better would be to query the
    > > hardware register which is responsible for the truncation.

    >
    > OK
    >
    > will rework pci_mmcfg_reject_broken to reduce size and check with
    > is_acpi_reserved/e820_mapped to update end_bus_number


    should we apply your current patch (because that is what got tested by
    Jack), with a followup patch - or would you like to send a new patch
    from scratch?

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  11. [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved


    for MacBookPro2

    change the mconf bus range from [0,0xff] to to [0, 0x3f]
    to match range [0xf0000000, 0xf4000000) in e820 tables.

    Signed-off-by: Yinghai Lu

    ---
    arch/x86/pci/mmconfig-shared.c | 64 ++++++++++++++++++++++++++++++-----------
    1 file changed, 47 insertions(+), 17 deletions(-)

    Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
    ================================================== =================
    --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
    +++ linux-2.6/arch/x86/pci/mmconfig-shared.c
    @@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re
    return AE_OK;
    }

    -static int __init is_acpi_reserved(unsigned long start, unsigned long end)
    +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
    {
    struct resource mcfg_res;

    @@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig
    return mcfg_res.flags;
    }

    +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
    +
    +static int __init is_mmconf_reserved(check_reserved_t is_reserved,
    + u64 addr, u64 size, int i,
    + typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
    +{
    + u64 old_size = size;
    + int valid = 0;
    +
    + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
    + size >>= 1;
    + if (size < (16UL<<20))
    + break;
    + }
    +
    + if (size >= (16UL<<20) || size == old_size) {
    + printk(KERN_NOTICE
    + "PCI: MCFG area at %Lx reserved in %s\n",
    + addr, with_e820?"E820":"ACPI motherboard resources");
    + valid = 1;
    +
    + if (old_size != size) {
    + /* update end_bus_number */
    + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
    + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
    + "segment %hu buses %u - %u\n",
    + i, (unsigned long)cfg->address, cfg->pci_segment,
    + (unsigned int)cfg->start_bus_number,
    + (unsigned int)cfg->end_bus_number);
    + }
    + }
    +
    + return valid;
    +}
    +
    static void __init pci_mmcfg_reject_broken(int early)
    {
    typeof(pci_mmcfg_config[0]) *cfg;
    @@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok

    for (i = 0; i < pci_mmcfg_config_num; i++) {
    int valid = 0;
    - u32 size = (cfg->end_bus_number + 1) << 20;
    + u64 addr, size;
    +
    cfg = &pci_mmcfg_config[i];
    + addr = cfg->start_bus_number;
    + addr <<= 20;
    + size = cfg->end_bus_number + 1 - cfg->start_bus_number;
    + size <<= 20;
    printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
    "segment %hu buses %u - %u\n",
    i, (unsigned long)cfg->address, cfg->pci_segment,
    (unsigned int)cfg->start_bus_number,
    (unsigned int)cfg->end_bus_number);

    - if (!early &&
    - is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
    - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
    - "in ACPI motherboard resources\n",
    - cfg->address);
    - valid = 1;
    - }
    + if (!early)
    + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);

    if (valid)
    continue;
    @@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok
    printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
    " reserved in ACPI motherboard resources\n",
    cfg->address);
    +
    /* Don't try to do this check unless configuration
    type 1 is available. how about type 2 ?*/
    - if (raw_pci_ops && e820_all_mapped(cfg->address,
    - cfg->address + size - 1,
    - E820_RESERVED)) {
    - printk(KERN_NOTICE
    - "PCI: MCFG area at %Lx reserved in E820\n",
    - cfg->address);
    - valid = 1;
    - }
    + if (raw_pci_ops)
    + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);

    if (!valid)
    goto reject;
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  12. Re: [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved


    * Yinghai Lu wrote:

    > for MacBookPro2
    >
    > change the mconf bus range from [0,0xff] to to [0, 0x3f]
    > to match range [0xf0000000, 0xf4000000) in e820 tables.
    >
    > Signed-off-by: Yinghai Lu


    pushed the commit below into tip/pci-for-jesse.

    Jack, could you check whether the end result in tip/master boots fine on
    your 3GB MacBook by default:

    http://people.redhat.com/mingo/x86.git/README

    .... and let us know if there are any other problems/weirdnesses.

    Ingo

    git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git pci-for-jesse

    ------------------------->
    commit 473e6a3881ed2b5903252cb6a759d55aecff8611
    Author: Yinghai Lu
    Date: Fri Jul 18 13:22:36 2008 -0700

    x86, pci: detect end_bus_number according to acpi/e820 reserved

    Jack Howarth reported that 2.6.26-rc9-git9 doesn't boot on MacBookPro2.

    the reason is a faulty BIOS update that reportes faulty resources.

    Nevertheless it's possible for Linux to be more resolent about this
    situation (and similar situations) and work around this bug, by
    cross-checking the mmconf range against the e820 table and ACPI resources.

    Change the mconf bus range from [0,0xff] to to [0, 0x3f]
    to match range [0xf0000000, 0xf4000000) in e820 tables.

    Reported-by: Jack Howarth
    Signed-off-by: Yinghai Lu
    Cc: jbarnes@virtuousgeek.org
    Cc: Jack Howarth
    Signed-off-by: Ingo Molnar
    ---
    arch/x86/pci/mmconfig-shared.c | 64 +++++++++++++++++++++++++++++----------
    1 files changed, 47 insertions(+), 17 deletions(-)

    diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
    index 23faaa8..9297882 100644
    --- a/arch/x86/pci/mmconfig-shared.c
    +++ b/arch/x86/pci/mmconfig-shared.c
    @@ -293,7 +293,7 @@ static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
    return AE_OK;
    }

    -static int __init is_acpi_reserved(unsigned long start, unsigned long end)
    +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
    {
    struct resource mcfg_res;

    @@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end)
    return mcfg_res.flags;
    }

    +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
    +
    +static int __init is_mmconf_reserved(check_reserved_t is_reserved,
    + u64 addr, u64 size, int i,
    + typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
    +{
    + u64 old_size = size;
    + int valid = 0;
    +
    + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
    + size >>= 1;
    + if (size < (16UL<<20))
    + break;
    + }
    +
    + if (size >= (16UL<<20) || size == old_size) {
    + printk(KERN_NOTICE
    + "PCI: MCFG area at %Lx reserved in %s\n",
    + addr, with_e820?"E820":"ACPI motherboard resources");
    + valid = 1;
    +
    + if (old_size != size) {
    + /* update end_bus_number */
    + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
    + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
    + "segment %hu buses %u - %u\n",
    + i, (unsigned long)cfg->address, cfg->pci_segment,
    + (unsigned int)cfg->start_bus_number,
    + (unsigned int)cfg->end_bus_number);
    + }
    + }
    +
    + return valid;
    +}
    +
    static void __init pci_mmcfg_reject_broken(int early)
    {
    typeof(pci_mmcfg_config[0]) *cfg;
    @@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_broken(int early)

    for (i = 0; i < pci_mmcfg_config_num; i++) {
    int valid = 0;
    - u32 size = (cfg->end_bus_number + 1) << 20;
    + u64 addr, size;
    +
    cfg = &pci_mmcfg_config[i];
    + addr = cfg->start_bus_number;
    + addr <<= 20;
    + size = cfg->end_bus_number + 1 - cfg->start_bus_number;
    + size <<= 20;
    printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
    "segment %hu buses %u - %u\n",
    i, (unsigned long)cfg->address, cfg->pci_segment,
    (unsigned int)cfg->start_bus_number,
    (unsigned int)cfg->end_bus_number);

    - if (!early &&
    - is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
    - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
    - "in ACPI motherboard resources\n",
    - cfg->address);
    - valid = 1;
    - }
    + if (!early)
    + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);

    if (valid)
    continue;
    @@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_broken(int early)
    printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
    " reserved in ACPI motherboard resources\n",
    cfg->address);
    +
    /* Don't try to do this check unless configuration
    type 1 is available. how about type 2 ?*/
    - if (raw_pci_ops && e820_all_mapped(cfg->address,
    - cfg->address + size - 1,
    - E820_RESERVED)) {
    - printk(KERN_NOTICE
    - "PCI: MCFG area at %Lx reserved in E820\n",
    - cfg->address);
    - valid = 1;
    - }
    + if (raw_pci_ops)
    + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);

    if (!valid)
    goto reject;
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  13. Re: [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved

    YH,
    I'll test the new patch shortly. When I do, I'll put back in
    your debug patches to try to get a complete log with pci=verbose
    and initcall_debug with PCIEASPM disabled. Hopefully the probing
    is done in the same general fashion with and without PCIEASPM so
    we can deduce what exactly is being probed when my MacBook Pro
    freezes during boot with PCIEASPM enabled. I consider the fact
    that booting 2.6.26 always freezes the kernel when PCIEASPM
    is enabled to be the more serious bug (since once Fedora ships
    2.6.26 kernels I'll be stuck always building my own).
    Jack


    On Fri, Jul 18, 2008 at 01:22:36PM -0700, Yinghai Lu wrote:
    >
    > for MacBookPro2
    >
    > change the mconf bus range from [0,0xff] to to [0, 0x3f]
    > to match range [0xf0000000, 0xf4000000) in e820 tables.
    >
    > Signed-off-by: Yinghai Lu
    >
    > ---
    > arch/x86/pci/mmconfig-shared.c | 64 ++++++++++++++++++++++++++++++-----------
    > 1 file changed, 47 insertions(+), 17 deletions(-)
    >
    > Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
    > ================================================== =================
    > --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
    > +++ linux-2.6/arch/x86/pci/mmconfig-shared.c
    > @@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re
    > return AE_OK;
    > }
    >
    > -static int __init is_acpi_reserved(unsigned long start, unsigned long end)
    > +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
    > {
    > struct resource mcfg_res;
    >
    > @@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig
    > return mcfg_res.flags;
    > }
    >
    > +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
    > +
    > +static int __init is_mmconf_reserved(check_reserved_t is_reserved,
    > + u64 addr, u64 size, int i,
    > + typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
    > +{
    > + u64 old_size = size;
    > + int valid = 0;
    > +
    > + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
    > + size >>= 1;
    > + if (size < (16UL<<20))
    > + break;
    > + }
    > +
    > + if (size >= (16UL<<20) || size == old_size) {
    > + printk(KERN_NOTICE
    > + "PCI: MCFG area at %Lx reserved in %s\n",
    > + addr, with_e820?"E820":"ACPI motherboard resources");
    > + valid = 1;
    > +
    > + if (old_size != size) {
    > + /* update end_bus_number */
    > + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
    > + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
    > + "segment %hu buses %u - %u\n",
    > + i, (unsigned long)cfg->address, cfg->pci_segment,
    > + (unsigned int)cfg->start_bus_number,
    > + (unsigned int)cfg->end_bus_number);
    > + }
    > + }
    > +
    > + return valid;
    > +}
    > +
    > static void __init pci_mmcfg_reject_broken(int early)
    > {
    > typeof(pci_mmcfg_config[0]) *cfg;
    > @@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok
    >
    > for (i = 0; i < pci_mmcfg_config_num; i++) {
    > int valid = 0;
    > - u32 size = (cfg->end_bus_number + 1) << 20;
    > + u64 addr, size;
    > +
    > cfg = &pci_mmcfg_config[i];
    > + addr = cfg->start_bus_number;
    > + addr <<= 20;
    > + size = cfg->end_bus_number + 1 - cfg->start_bus_number;
    > + size <<= 20;
    > printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
    > "segment %hu buses %u - %u\n",
    > i, (unsigned long)cfg->address, cfg->pci_segment,
    > (unsigned int)cfg->start_bus_number,
    > (unsigned int)cfg->end_bus_number);
    >
    > - if (!early &&
    > - is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
    > - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
    > - "in ACPI motherboard resources\n",
    > - cfg->address);
    > - valid = 1;
    > - }
    > + if (!early)
    > + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
    >
    > if (valid)
    > continue;
    > @@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok
    > printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
    > " reserved in ACPI motherboard resources\n",
    > cfg->address);
    > +
    > /* Don't try to do this check unless configuration
    > type 1 is available. how about type 2 ?*/
    > - if (raw_pci_ops && e820_all_mapped(cfg->address,
    > - cfg->address + size - 1,
    > - E820_RESERVED)) {
    > - printk(KERN_NOTICE
    > - "PCI: MCFG area at %Lx reserved in E820\n",
    > - cfg->address);
    > - valid = 1;
    > - }
    > + if (raw_pci_ops)
    > + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
    >
    > if (!valid)
    > goto reject;

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  14. Re: [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved

    On Fri, Jul 18, 2008 at 2:48 PM, Jack Howarth wrote:
    > YH,
    > I'll test the new patch shortly. When I do, I'll put back in
    > your debug patches to try to get a complete log with pci=verbose
    > and initcall_debug with PCIEASPM disabled.

    tip tree has the two debug patches.

    > Hopefully the probing
    > is done in the same general fashion with and without PCIEASPM so
    > we can deduce what exactly is being probed when my MacBook Pro
    > freezes during boot with PCIEASPM enabled. I consider the fact
    > that booting 2.6.26 always freezes the kernel when PCIEASPM
    > is enabled to be the more serious bug (since once Fedora ships
    > 2.6.26 kernels I'll be stuck always building my own).


    another laptop : Acer ... suffer this problem too with ASPM...

    YH
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  15. Re: [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved

    On Friday, July 18, 2008 3:27 pm Yinghai Lu wrote:
    > On Fri, Jul 18, 2008 at 2:48 PM, Jack Howarth

    wrote:
    > > YH,
    > > I'll test the new patch shortly. When I do, I'll put back in
    > > your debug patches to try to get a complete log with pci=verbose
    > > and initcall_debug with PCIEASPM disabled.

    >
    > tip tree has the two debug patches.
    >
    > > Hopefully the probing
    > > is done in the same general fashion with and without PCIEASPM so
    > > we can deduce what exactly is being probed when my MacBook Pro
    > > freezes during boot with PCIEASPM enabled. I consider the fact
    > > that booting 2.6.26 always freezes the kernel when PCIEASPM
    > > is enabled to be the more serious bug (since once Fedora ships
    > > 2.6.26 kernels I'll be stuck always building my own).

    >
    > another laptop : Acer ... suffer this problem too with ASPM...


    Yeah, looks like we'll have to be more conservative about enabling ASPM.
    Maybe a whitelist approach would be better...

    Jesse
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  16. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    YH,
    The patch you posted did not apply cleanly to tonight's or last night's linus kernel git.
    I had to correct it by hand and this is what I applied...

    --- linux-2.6.26/arch/x86/pci/mmconfig-shared.c.orig 2008-07-18 18:57:29.000000000 -0400
    +++ linux-2.6.26/arch/x86/pci/mmconfig-shared.c 2008-07-18 19:11:25.000000000 -0400
    @@ -293,7 +293,7 @@
    return AE_OK;
    }

    -static int __init is_acpi_reserved(unsigned long start, unsigned long end)
    +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
    {
    struct resource mcfg_res;

    @@ -310,6 +310,41 @@
    return mcfg_res.flags;
    }

    +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
    +
    +static int __init is_mmconf_reserved(check_reserved_t is_reserved,
    + u64 addr, u64 size, int i,
    + typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
    +{
    + u64 old_size = size;
    + int valid = 0;
    +
    + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
    + size >>= 1;
    + if (size < (16UL<<20))
    + break;
    + }
    +
    + if (size >= (16UL<<20) || size == old_size) {
    + printk(KERN_NOTICE
    + "PCI: MCFG area at %Lx reserved in %s\n",
    + addr, with_e820?"E820":"ACPI motherboard resources");
    + valid = 1;
    +
    + if (old_size != size) {
    + /* update end_bus_number */
    + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
    + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
    + "segment %hu buses %u - %u\n",
    + i, (unsigned long)cfg->address, cfg->pci_segment,
    + (unsigned int)cfg->start_bus_number,
    + (unsigned int)cfg->end_bus_number);
    + }
    + }
    +
    + return valid;
    +}
    +
    static void __init pci_mmcfg_reject_broken(int early)
    {
    typeof(pci_mmcfg_config[0]) *cfg;
    @@ -324,21 +359,21 @@

    for (i = 0; i < pci_mmcfg_config_num; i++) {
    int valid = 0;
    - u32 size = (cfg->end_bus_number + 1) << 20;
    + u64 addr, size;
    +
    cfg = &pci_mmcfg_config[i];
    + addr = cfg->start_bus_number;
    + addr <<= 20;
    + size = cfg->end_bus_number + 1 - cfg->start_bus_number;
    + size <<= 20;
    printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
    "segment %hu buses %u - %u\n",
    i, (unsigned long)cfg->address, cfg->pci_segment,
    (unsigned int)cfg->start_bus_number,
    (unsigned int)cfg->end_bus_number);

    - if (!early &&
    - is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
    - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
    - "in ACPI motherboard resources\n",
    - cfg->address);
    - valid = 1;
    - }
    + if (!early)
    + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);

    if (valid)
    continue;
    @@ -347,16 +382,12 @@
    printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
    " reserved in ACPI motherboard resources\n",
    cfg->address);
    +
    /* Don't try to do this check unless configuration
    type 1 is available. how about type 2 ?*/
    - if (raw_pci_ops && e820_all_mapped(cfg->address,
    - cfg->address + size - 1,
    - E820_RESERVED)) {
    - printk(KERN_NOTICE
    - "PCI: MCFG area at %Lx reserved in E820\n",
    - cfg->address);
    - valid = 1;
    - }
    +
    + if (raw_pci_ops)
    + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);

    if (!valid)
    goto reject;

    Unfortunately, unlike the previous patch, this one doesn't allow MMCONFIG to be used on
    my MacBook Pro V2. I can completely boot though because I now know to disable PCIEASPM.
    Below is the dmesg output with both of your debug patches in place. Let me know if you
    have a revised patch for me to test.
    Jack
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.27-0.156.rc0.git4.fc9.x86_64 (howarth@localhost.localdomain) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jul 18 19:27:05 EDT 2008
    Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug initcall_debug pci=verbose
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable)
    BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS)
    BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data)
    BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
    BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
    BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    PCI: Unknown option `verbose'
    last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    init_memory_mapping
    0000000000 - 00bf000000 page 2M
    00bf000000 - 00bf0e9000 page 4k
    kernel direct mapping tables up to bf0e9000 @ 8000-d000
    last_map_addr: bf0e9000 end: bf0e9000
    RAMDISK: 37d35000 - 37fef5d1
    DMI 2.4 present.
    ACPI: RSDP 000FE020, 0024 (r2 APPLE )
    ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
    ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
    ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309)
    ACPI: FACS BFEC0000, 0040
    ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
    ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
    ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
    ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
    ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
    ACPI: DMI detected: Apple
    No NUMA configuration found
    Faking a node at 0000000000000000-00000000bf0e9000
    Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
    Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used
    Bootmem setup node 0 0000000000000000-00000000bf0e9000
    NODE_DATA [000000000000b000 - 000000000001ffff]
    bootmap [0000000000020000 - 0000000000037e1f] pages 18
    (6 early reservations) ==> bootmem
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 0000e5fe68] TEXT DATA BSS ==> [0000200000 - 0000e5fe68]
    #3 [0037d35000 - 0037fef5d1] RAMDISK ==> [0037d35000 - 0037fef5d1]
    #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
    Scan SMP from ffff880000000000 for 1024 bytes.
    Scan SMP from ffff88000009fc00 for 1024 bytes.
    Scan SMP from ffff8800000f0000 for 65536 bytes.
    Scan SMP from ffff88000009fc00 for 1024 bytes.
    [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00100000
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bf0e9
    On node 0 totalpages: 782472
    DMA zone: 96 pages used for memmap
    DMA zone: 3269 pages reserved
    DMA zone: 634 pages, LIFO batch:0
    DMA32 zone: 18246 pages used for memmap
    DMA32 zone: 760227 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
    PERCPU: Allocating 442304 bytes of per cpu data
    NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 760861
    Policy zone: DMA32
    Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug initcall_debug pci=verbose
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    TSC calibrated against PM_TIMER
    Detected 2327.507 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    .... MAX_LOCKDEP_SUBCLASSES: 8
    .... MAX_LOCK_DEPTH: 48
    .... MAX_LOCKDEP_KEYS: 2048
    .... CLASSHASH_SIZE: 1024
    .... MAX_LOCKDEP_ENTRIES: 8192
    .... MAX_LOCKDEP_CHAINS: 16384
    .... CHAINHASH_SIZE: 8192
    memory used by lock dependency info: 1840 kB
    per task-struct memory footprint: 3456 bytes
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3039268k/3130276k available (3099k kernel code, 90620k reserved, 1746k data, 1544k init)
    CPA: page pool initialized 48 of 48 pages preallocated
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    hpet clockevent registered
    Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4655.01 BogoMIPS (lpj=2327507)
    Security Framework initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys devices
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 0/0 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20080609
    CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
    Using local APIC timer interrupts.
    APIC timer calibration result 10390657
    Detected 10.390 MHz APIC timer.
    lockdep: fixing up alternatives.
    Booting processor 1/1 ip 6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. <6>4654.80 BogoMIPS (lpj=2327403)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 1/1 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (9309.82 BogoMIPS).
    sizeof(vma)=176 bytes
    sizeof(page)=96 bytes
    sizeof(inode)=1088 bytes
    sizeof(dentry)=256 bytes
    sizeof(ext3inode)=1488 bytes
    sizeof(buffer_head)=104 bytes
    sizeof(skbuff)=232 bytes
    sizeof(task_struct)=9528 bytes
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    khelper used greatest stack depth: 5648 bytes left
    calling init_cpufreq_transition_notifier_list+0x0/0x20
    initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs
    calling net_ns_init+0x0/0x134
    net_namespace: 1352 bytes
    initcall net_ns_init+0x0/0x134 returned 0 after 0 msecs
    calling cpufreq_tsc+0x0/0x16
    initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
    calling init_smp_flush+0x0/0x6b
    initcall init_smp_flush+0x0/0x6b returned 0 after 0 msecs
    calling print_banner+0x0/0x13
    Booting paravirtualized kernel on bare hardware
    initcall print_banner+0x0/0x13 returned 0 after 0 msecs
    calling sysctl_init+0x0/0x37
    initcall sysctl_init+0x0/0x37 returned 0 after 0 msecs
    calling ksysfs_init+0x0/0xc0
    initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs
    calling init_jiffies_clocksource+0x0/0x17
    initcall init_jiffies_clocksource+0x0/0x17 returned 0 after 0 msecs
    calling pm_init+0x0/0x39
    initcall pm_init+0x0/0x39 returned 0 after 0 msecs
    calling pm_disk_init+0x0/0x1e
    initcall pm_disk_init+0x0/0x1e returned 0 after 0 msecs
    calling swsusp_header_init+0x0/0x31
    initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs
    calling ftrace_dynamic_init+0x0/0xd7
    initcall ftrace_dynamic_init+0x0/0xd7 returned 0 after 0 msecs
    calling filelock_init+0x0/0x33
    initcall filelock_init+0x0/0x33 returned 0 after 0 msecs
    calling init_misc_binfmt+0x0/0x44
    initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 msecs
    calling init_script_binfmt+0x0/0x17
    initcall init_script_binfmt+0x0/0x17 returned 0 after 0 msecs
    calling init_elf_binfmt+0x0/0x17
    initcall init_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
    calling init_compat_elf_binfmt+0x0/0x17
    initcall init_compat_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
    calling debugfs_init+0x0/0x56
    initcall debugfs_init+0x0/0x56 returned 0 after 0 msecs
    calling securityfs_init+0x0/0x56
    initcall securityfs_init+0x0/0x56 returned 0 after 0 msecs
    calling random32_init+0x0/0x5f
    initcall random32_init+0x0/0x5f returned 0 after 0 msecs
    calling early_resume_init+0x0/0x1d4
    Time: 0:50:35 Date: 07/19/08
    initcall early_resume_init+0x0/0x1d4 returned 0 after 0 msecs
    calling cpufreq_core_init+0x0/0x8f
    initcall cpufreq_core_init+0x0/0x8f returned 0 after 0 msecs
    calling cpuidle_init+0x0/0x45
    initcall cpuidle_init+0x0/0x45 returned 0 after 0 msecs
    calling sock_init+0x0/0x63
    initcall sock_init+0x0/0x63 returned 0 after 0 msecs
    calling netpoll_init+0x0/0x46
    initcall netpoll_init+0x0/0x46 returned 0 after 0 msecs
    calling netlink_proto_init+0x0/0x150
    NET: Registered protocol family 16
    initcall netlink_proto_init+0x0/0x150 returned 0 after 0 msecs
    calling bdi_class_init+0x0/0x42
    initcall bdi_class_init+0x0/0x42 returned 0 after 0 msecs
    calling kobject_uevent_init+0x0/0x47
    initcall kobject_uevent_init+0x0/0x47 returned 0 after 0 msecs
    calling pcibus_class_init+0x0/0x17
    initcall pcibus_class_init+0x0/0x17 returned 0 after 0 msecs
    calling pci_driver_init+0x0/0x17
    initcall pci_driver_init+0x0/0x17 returned 0 after 0 msecs
    calling backlight_class_init+0x0/0x4e
    initcall backlight_class_init+0x0/0x4e returned 0 after 0 msecs
    calling dock_init+0x0/0x5f
    No dock devices found.
    initcall dock_init+0x0/0x5f returned 0 after 0 msecs
    calling tty_class_init+0x0/0x2f
    initcall tty_class_init+0x0/0x2f returned 0 after 0 msecs
    calling vtconsole_class_init+0x0/0xbf
    initcall vtconsole_class_init+0x0/0xbf returned 0 after 0 msecs
    calling register_node_type+0x0/0x83
    initcall register_node_type+0x0/0x83 returned 0 after 0 msecs
    calling enable_pci_io_ecs+0x0/0x33
    initcall enable_pci_io_ecs+0x0/0x33 returned 0 after 0 msecs
    calling early_fill_mp_bus_info+0x0/0x80c
    initcall early_fill_mp_bus_info+0x0/0x80c returned 0 after 0 msecs
    calling arch_kdebugfs_init+0x0/0x1e0
    initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 msecs
    calling mtrr_if_init+0x0/0x7e
    initcall mtrr_if_init+0x0/0x7e returned 0 after 0 msecs
    calling ffh_cstate_init+0x0/0x36
    initcall ffh_cstate_init+0x0/0x36 returned 0 after 0 msecs
    calling acpi_pci_init+0x0/0x45
    ACPI: bus type pci registered
    initcall acpi_pci_init+0x0/0x45 returned 0 after 0 msecs
    calling init_acpi_device_notify+0x0/0x50
    initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs
    calling dmi_id_init+0x0/0x2f1
    initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 msecs
    calling pci_arch_init+0x0/0x53
    PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1 for base access
    initcall pci_arch_init+0x0/0x53 returned 0 after 0 msecs
    calling topology_init+0x0/0x96
    initcall topology_init+0x0/0x96 returned 0 after 0 msecs
    calling mtrr_init_finialize+0x0/0x42
    initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 msecs
    calling param_sysfs_init+0x0/0x1f3
    khelper used greatest stack depth: 5552 bytes left
    khelper used greatest stack depth: 4904 bytes left
    initcall param_sysfs_init+0x0/0x1f3 returned 0 after 9 msecs
    calling pm_sysrq_init+0x0/0x1e
    initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs
    calling readahead_init+0x0/0x3d
    initcall readahead_init+0x0/0x3d returned 0 after 0 msecs
    calling init_bio+0x0/0xca
    initcall init_bio+0x0/0xca returned 0 after 0 msecs
    calling integrity_init+0x0/0x3f
    initcall integrity_init+0x0/0x3f returned 0 after 0 msecs
    calling blk_settings_init+0x0/0x2f
    initcall blk_settings_init+0x0/0x2f returned 0 after 0 msecs
    calling blk_ioc_init+0x0/0x2f
    initcall blk_ioc_init+0x0/0x2f returned 0 after 0 msecs
    calling genhd_device_init+0x0/0x5a
    initcall genhd_device_init+0x0/0x5a returned 0 after 0 msecs
    calling blk_dev_integrity_init+0x0/0x2f
    initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 msecs
    calling pci_slot_init+0x0/0x4c
    initcall pci_slot_init+0x0/0x4c returned 0 after 0 msecs
    calling fbmem_init+0x0/0x8f
    initcall fbmem_init+0x0/0x8f returned 0 after 0 msecs
    calling acpi_init+0x0/0x226
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
    PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
    PCI: Not using MMCONFIG.
    initcall acpi_init+0x0/0x226 returned 0 after 125 msecs
    calling acpi_scan_init+0x0/0x10f
    initcall acpi_scan_init+0x0/0x10f returned 0 after 50 msecs
    calling acpi_ec_init+0x0/0x66
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs
    calling acpi_pci_root_init+0x0/0x2d
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    PCI: 0000:00:07.0 reg 10 32bit mmio: [d8404000, d8404fff]
    PCI: 0000:00:1b.0 reg 10 64bit mmio: [d8400000, d8403fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f]
    PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f]
    PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f]
    PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f]
    PCI: 0000:00:1d.7 reg 10 32bit mmio: [d8405400, d84057ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
    PCI: 0000:00:1f.1 reg 10 io port: [40d8, 40df]
    PCI: 0000:00:1f.1 reg 14 io port: [40ec, 40ef]
    PCI: 0000:00:1f.1 reg 18 io port: [40d0, 40d7]
    PCI: 0000:00:1f.1 reg 1c io port: [40e8, 40eb]
    PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf]
    PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf]
    PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7]
    PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7]
    PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3]
    PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af]
    PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf]
    PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
    PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [d8300000, d83fffff]
    PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
    PCI: 0000:02:00.0 reg 10 64bit mmio: [d8200000, d8203fff]
    PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff]
    pci 0000:02:00.0: supports D1
    pci 0000:02:00.0: supports D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d82fffff]
    PCI: 0000:03:00.0 reg 10 64bit mmio: [d8100000, d810ffff]
    pci 0000:03:00.0: supports D1
    pci 0000:03:00.0: PME# supported from D0 D1 D3hot
    pci 0000:03:00.0: PME# disabled
    PCI: bridge 0000:00:1c.1 32bit mmio: [d8100000, d81fffff]
    PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
    PCI: bridge 0000:00:1c.2 32bit mmio: [d4100000, d80fffff]
    PCI: bridge 0000:00:1c.2 64bit mmio pref: [d0000000, d3ffffff]
    PCI: 0000:0c:03.0 reg 10 32bit mmio: [d4004000, d40047ff]
    PCI: 0000:0c:03.0 reg 14 32bit mmio: [d4000000, d4003fff]
    pci 0000:0c:03.0: supports D1
    pci 0000:0c:03.0: supports D2
    pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:0c:03.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    PCI: bridge 0000:00:1e.0 32bit mmio: [d4000000, d40fffff]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    initcall acpi_pci_root_init+0x0/0x2d returned 0 after 78 msecs
    calling acpi_pci_link_init+0x0/0x4d
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
    initcall acpi_pci_link_init+0x0/0x4d returned 0 after 14 msecs
    calling acpi_power_init+0x0/0x7c
    initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs
    calling acpi_system_init+0x0/0x265
    initcall acpi_system_init+0x0/0x265 returned 0 after 0 msecs
    calling acpi_cm_sbs_init+0x0/0xd
    initcall acpi_cm_sbs_init+0x0/0xd returned 0 after 0 msecs
    calling pnp_init+0x0/0x25
    Linux Plug and Play Support v0.97 (c) Adam Belay
    initcall pnp_init+0x0/0x25 returned 0 after 0 msecs
    calling pnpacpi_init+0x0/0x91
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 9 devices
    ACPI: ACPI bus type pnp unregistered
    initcall pnpacpi_init+0x0/0x91 returned 0 after 20 msecs
    calling misc_init+0x0/0x9d
    initcall misc_init+0x0/0x9d returned 0 after 0 msecs
    calling cn_init+0x0/0xf3
    initcall cn_init+0x0/0xf3 returned 0 after 0 msecs
    calling init_scsi+0x0/0x96
    SCSI subsystem initialized
    initcall init_scsi+0x0/0x96 returned 0 after 1 msecs
    calling ata_init+0x0/0x368
    libata version 3.00 loaded.
    initcall ata_init+0x0/0x368 returned 0 after 0 msecs
    calling init_pcmcia_cs+0x0/0x2d
    initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 msecs
    calling usb_init+0x0/0x131
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    initcall usb_init+0x0/0x131 returned 0 after 1 msecs
    calling serio_init+0x0/0x8e
    initcall serio_init+0x0/0x8e returned 0 after 0 msecs
    calling input_init+0x0/0x10c
    initcall input_init+0x0/0x10c returned 0 after 0 msecs
    calling rtc_init+0x0/0x75
    initcall rtc_init+0x0/0x75 returned 0 after 0 msecs
    calling power_supply_class_init+0x0/0x39
    initcall power_supply_class_init+0x0/0x39 returned 0 after 0 msecs
    calling thermal_init+0x0/0x56
    initcall thermal_init+0x0/0x56 returned 0 after 0 msecs
    calling md_init+0x0/0xd5
    initcall md_init+0x0/0xd5 returned 0 after 0 msecs
    calling leds_init+0x0/0x2f
    initcall leds_init+0x0/0x2f returned 0 after 0 msecs
    calling dma_bus_init+0x0/0x31
    initcall dma_bus_init+0x0/0x31 returned 0 after 0 msecs
    calling pci_subsys_init+0x0/0x126
    PCI: Using ACPI for IRQ routing
    initcall pci_subsys_init+0x0/0x126 returned 0 after 0 msecs
    calling proto_init+0x0/0x33
    initcall proto_init+0x0/0x33 returned 0 after 0 msecs
    calling net_dev_init+0x0/0x1f3
    initcall net_dev_init+0x0/0x1f3 returned 0 after 0 msecs
    calling neigh_init+0x0/0x76
    initcall neigh_init+0x0/0x76 returned 0 after 0 msecs
    calling fib_rules_init+0x0/0xab
    initcall fib_rules_init+0x0/0xab returned 0 after 0 msecs
    calling pktsched_init+0x0/0xc9
    initcall pktsched_init+0x0/0xc9 returned 0 after 0 msecs
    calling tc_filter_init+0x0/0x51
    initcall tc_filter_init+0x0/0x51 returned 0 after 0 msecs
    calling tc_action_init+0x0/0x51
    initcall tc_action_init+0x0/0x51 returned 0 after 0 msecs
    calling genl_init+0x0/0xdd
    initcall genl_init+0x0/0xdd returned 0 after 3 msecs
    calling cipso_v4_init+0x0/0x8d
    initcall cipso_v4_init+0x0/0x8d returned 0 after 0 msecs
    calling wireless_nlevent_init+0x0/0x46
    initcall wireless_nlevent_init+0x0/0x46 returned 0 after 0 msecs
    calling netlbl_init+0x0/0x86
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    initcall netlbl_init+0x0/0x86 returned 0 after 0 msecs
    calling sysctl_init+0x0/0x32
    initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs
    calling pci_iommu_init+0x0/0x21
    PCI-GART: No AMD northbridge found.
    initcall pci_iommu_init+0x0/0x21 returned 0 after 0 msecs
    calling hpet_late_init+0x0/0x107
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    initcall hpet_late_init+0x0/0x107 returned 0 after 0 msecs
    calling clocksource_done_booting+0x0/0x17
    initcall clocksource_done_booting+0x0/0x17 returned 0 after 0 msecs
    calling ftrace_init_debugfs+0x0/0xfd
    initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    calling tracer_alloc_buffers+0x0/0x5a1
    tracer: 1286 pages allocated for 65536 entries of 80 bytes
    actual entries 65586
    initcall tracer_alloc_buffers+0x0/0x5a1 returned 0 after 19 msecs
    calling init_pipe_fs+0x0/0x51
    initcall init_pipe_fs+0x0/0x51 returned 0 after 0 msecs
    calling init_mnt_writers+0x0/0x95
    initcall init_mnt_writers+0x0/0x95 returned 0 after 0 msecs
    calling eventpoll_init+0x0/0x9a
    initcall eventpoll_init+0x0/0x9a returned 0 after 0 msecs
    calling anon_inode_init+0x0/0x11c
    initcall anon_inode_init+0x0/0x11c returned 0 after 0 msecs
    calling acpi_rtc_init+0x0/0xf9
    ACPI: RTC can wake from S4
    initcall acpi_rtc_init+0x0/0xf9 returned 0 after 0 msecs
    calling acpi_event_init+0x0/0x85
    initcall acpi_event_init+0x0/0x85 returned 0 after 2 msecs
    calling pnp_system_init+0x0/0x17
    system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
    system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
    system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
    system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
    system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:07: ioport range 0x680-0x6ef has been reserved
    system 00:07: ioport range 0x800-0x80f has been reserved
    system 00:07: ioport range 0x810-0x817 has been reserved
    system 00:07: ioport range 0x400-0x47f has been reserved
    system 00:07: ioport range 0x500-0x53f has been reserved
    system 00:07: ioport range 0x1640-0x164f has been reserved
    initcall pnp_system_init+0x0/0x17 returned 0 after 2 msecs
    calling chr_dev_init+0x0/0x9d
    initcall chr_dev_init+0x0/0x9d returned 0 after 2 msecs
    calling firmware_class_init+0x0/0x77
    initcall firmware_class_init+0x0/0x77 returned 0 after 0 msecs
    calling loopback_init+0x0/0x17
    initcall loopback_init+0x0/0x17 returned 0 after 1 msecs
    calling init_pcmcia_bus+0x0/0x89
    initcall init_pcmcia_bus+0x0/0x89 returned 0 after 0 msecs
    calling cpufreq_gov_performance_init+0x0/0x17
    initcall cpufreq_gov_performance_init+0x0/0x17 returned 0 after 0 msecs
    calling cpufreq_gov_userspace_init+0x0/0x17
    initcall cpufreq_gov_userspace_init+0x0/0x17 returned 0 after 0 msecs
    calling init_acpi_pm_clocksource+0x0/0xae
    initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs
    calling pcibios_assign_resources+0x0/0x8d
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x3000-0x3fff
    pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: 0x2000-0x2fff
    pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff
    pci 0000:00:1c.0: PREFETCH window: 0x000000d8500000-0x000000d85fffff
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: disabled
    pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
    pci 0000:00:1c.2: IO window: 0x1000-0x1fff
    pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff
    pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d3ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
    pci 0000:00:1e.0: IO window: disabled
    pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff
    pci 0000:00:1e.0: PREFETCH window: disabled
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    pci 0000:00:1e.0: power state changed by ACPI to D0
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffffffffffff]
    bus: 01 index 0 io port: [3000, 3fff]
    bus: 01 index 1 mmio: [d8300000, d83fffff]
    bus: 01 index 2 mmio: [c0000000, cfffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [2000, 2fff]
    bus: 02 index 1 mmio: [d8200000, d82fffff]
    bus: 02 index 2 mmio: [d8500000, d85fffff]
    bus: 02 index 3 mmio: [0, 0]
    bus: 03 index 0 mmio: [0, 0]
    bus: 03 index 1 mmio: [d8100000, d81fffff]
    bus: 03 index 2 mmio: [0, 0]
    bus: 03 index 3 mmio: [0, 0]
    bus: 04 index 0 io port: [1000, 1fff]
    bus: 04 index 1 mmio: [d4100000, d80fffff]
    bus: 04 index 2 mmio: [d0000000, d3ffffff]
    bus: 04 index 3 mmio: [0, 0]
    bus: 0c index 0 mmio: [0, 0]
    bus: 0c index 1 mmio: [d4000000, d40fffff]
    bus: 0c index 2 mmio: [0, 0]
    bus: 0c index 3 io port: [0, ffff]
    bus: 0c index 4 mmio: [0, ffffffffffffffff]
    initcall pcibios_assign_resources+0x0/0x8d returned 0 after 9 msecs
    calling inet_init+0x0/0x354
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    initcall inet_init+0x0/0x354 returned 0 after 39 msecs
    calling af_unix_init+0x0/0x5a
    NET: Registered protocol family 1
    initcall af_unix_init+0x0/0x5a returned 0 after 0 msecs
    calling populate_rootfs+0x0/0xf3
    checking if image is initramfs... it is
    debug: unmapping init memory ffff880037d35000..ffff880037ff0000
    initcall populate_rootfs+0x0/0xf3 returned 0 after 259 msecs
    calling calgary_fixup_tce_spaces+0x0/0xfe
    initcall calgary_fixup_tce_spaces+0x0/0xfe returned -19 after 0 msecs
    calling i8259A_init_sysfs+0x0/0x27
    initcall i8259A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
    calling vsyscall_init+0x0/0x71
    initcall vsyscall_init+0x0/0x71 returned 0 after 0 msecs
    calling sbf_init+0x0/0xf4
    initcall sbf_init+0x0/0xf4 returned 0 after 0 msecs
    calling i8237A_init_sysfs+0x0/0x27
    initcall i8237A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
    calling add_rtc_cmos+0x0/0x1d
    initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
    calling cache_sysfs_init+0x0/0x62
    initcall cache_sysfs_init+0x0/0x62 returned 0 after 2 msecs
    calling mce_init_device+0x0/0x8a
    initcall mce_init_device+0x0/0x8a returned 0 after 1 msecs
    calling periodic_mcheck_init+0x0/0x44
    initcall periodic_mcheck_init+0x0/0x44 returned 0 after 0 msecs
    calling thermal_throttle_init_device+0x0/0x92
    initcall thermal_throttle_init_device+0x0/0x92 returned 0 after 0 msecs
    calling threshold_init_device+0x0/0x4e
    initcall threshold_init_device+0x0/0x4e returned 0 after 0 msecs
    calling msr_init+0x0/0x124
    initcall msr_init+0x0/0x124 returned 0 after 0 msecs
    calling cpuid_init+0x0/0x124
    initcall cpuid_init+0x0/0x124 returned 0 after 0 msecs
    calling init_lapic_sysfs+0x0/0x32
    initcall init_lapic_sysfs+0x0/0x32 returned 0 after 0 msecs
    calling ioapic_init_sysfs+0x0/0xac
    initcall ioapic_init_sysfs+0x0/0xac returned 0 after 0 msecs
    calling add_pcspkr+0x0/0x45
    initcall add_pcspkr+0x0/0x45 returned 0 after 0 msecs
    calling uv_ptc_init+0x0/0x7a
    initcall uv_ptc_init+0x0/0x7a returned 0 after 0 msecs
    calling uv_bau_init+0x0/0x604
    initcall uv_bau_init+0x0/0x604 returned 0 after 0 msecs
    calling audit_classes_init+0x0/0xb4
    initcall audit_classes_init+0x0/0xb4 returned 0 after 0 msecs
    calling debug_pagealloc_proc_init+0x0/0x30
    initcall debug_pagealloc_proc_init+0x0/0x30 returned 0 after 0 msecs
    calling pt_dump_init+0x0/0x30
    initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs
    calling init_vdso_vars+0x0/0x219
    initcall init_vdso_vars+0x0/0x219 returned 0 after 0 msecs
    calling ia32_binfmt_init+0x0/0x19
    initcall ia32_binfmt_init+0x0/0x19 returned 0 after 0 msecs
    calling sysenter_setup+0x0/0x2ad
    initcall sysenter_setup+0x0/0x2ad returned 0 after 0 msecs
    calling init_sched_debug_procfs+0x0/0x2c
    initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs
    calling create_proc_profile+0x0/0x2cf
    initcall create_proc_profile+0x0/0x2cf returned 0 after 0 msecs
    calling ioresources_init+0x0/0x41
    initcall ioresources_init+0x0/0x41 returned 0 after 0 msecs
    calling uid_cache_init+0x0/0x92
    initcall uid_cache_init+0x0/0x92 returned 0 after 0 msecs
    calling init_posix_timers+0x0/0xa0
    initcall init_posix_timers+0x0/0xa0 returned 0 after 0 msecs
    calling init_posix_cpu_timers+0x0/0xb5
    initcall init_posix_cpu_timers+0x0/0xb5 returned 0 after 0 msecs
    calling nsproxy_cache_init+0x0/0x32
    initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 msecs
    calling timekeeping_init_device+0x0/0x27
    initcall timekeeping_init_device+0x0/0x27 returned 0 after 0 msecs
    calling init_clocksource_sysfs+0x0/0x55
    initcall init_clocksource_sysfs+0x0/0x55 returned 0 after 0 msecs
    calling init_timer_list_procfs+0x0/0x31
    initcall init_timer_list_procfs+0x0/0x31 returned 0 after 0 msecs
    calling init_tstats_procfs+0x0/0x31
    initcall init_tstats_procfs+0x0/0x31 returned 0 after 0 msecs
    calling lockdep_proc_init+0x0/0x7c
    initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 msecs
    calling futex_init+0x0/0xcc
    initcall futex_init+0x0/0xcc returned 0 after 0 msecs
    calling proc_dma_init+0x0/0x27
    initcall proc_dma_init+0x0/0x27 returned 0 after 0 msecs
    calling percpu_modinit+0x0/0x79
    initcall percpu_modinit+0x0/0x79 returned 0 after 0 msecs
    calling kallsyms_init+0x0/0x2a
    initcall kallsyms_init+0x0/0x2a returned 0 after 0 msecs
    calling snapshot_device_init+0x0/0x17
    initcall snapshot_device_init+0x0/0x17 returned 0 after 0 msecs
    calling crash_save_vmcoreinfo_init+0x0/0x430
    initcall crash_save_vmcoreinfo_init+0x0/0x430 returned 0 after 0 msecs
    calling crash_notes_memory_init+0x0/0x44
    initcall crash_notes_memory_init+0x0/0x44 returned 0 after 0 msecs
    calling pid_namespaces_init+0x0/0x32
    initcall pid_namespaces_init+0x0/0x32 returned 0 after 0 msecs
    calling audit_init+0x0/0x172
    audit: initializing netlink socket (disabled)
    type=2000 audit(1216428634.918:1): initialized
    initcall audit_init+0x0/0x172 returned 0 after 0 msecs
    calling audit_tree_init+0x0/0x4e
    initcall audit_tree_init+0x0/0x4e returned 0 after 0 msecs
    calling init_kprobes+0x0/0x124
    initcall init_kprobes+0x0/0x124 returned 0 after 4 msecs
    calling relay_init+0x0/0x19
    initcall relay_init+0x0/0x19 returned 0 after 0 msecs
    calling utsname_sysctl_init+0x0/0x19
    initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs
    calling init_lstats_procfs+0x0/0x2a
    initcall init_lstats_procfs+0x0/0x2a returned 0 after 0 msecs
    calling init_sched_switch_trace+0x0/0x41
    initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs
    calling init_stack_trace+0x0/0x12
    initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs
    calling init_function_trace+0x0/0x12
    initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs
    calling init_irqsoff_tracer+0x0/0x14
    initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 msecs
    calling init_wakeup_tracer+0x0/0x12
    initcall init_wakeup_tracer+0x0/0x12 returned 0 after 0 msecs
    calling init_per_zone_pages_min+0x0/0x46
    initcall init_per_zone_pages_min+0x0/0x46 returned 0 after 0 msecs
    calling pdflush_init+0x0/0x17
    initcall pdflush_init+0x0/0x17 returned 0 after 0 msecs
    calling kswapd_init+0x0/0x7d
    initcall kswapd_init+0x0/0x7d returned 0 after 0 msecs
    calling setup_vmstat+0x0/0x4f
    initcall setup_vmstat+0x0/0x4f returned 0 after 0 msecs
    calling procswaps_init+0x0/0x27
    initcall procswaps_init+0x0/0x27 returned 0 after 0 msecs
    calling hugetlb_init+0x0/0xa0
    Total HugeTLB memory allocated, 0
    initcall hugetlb_init+0x0/0xa0 returned 0 after 0 msecs
    calling init_tmpfs+0x0/0xdf
    initcall init_tmpfs+0x0/0xdf returned 0 after 0 msecs
    calling slab_sysfs_init+0x0/0xf5
    initcall slab_sysfs_init+0x0/0xf5 returned 0 after 29 msecs
    calling fasync_init+0x0/0x2f
    initcall fasync_init+0x0/0x2f returned 0 after 0 msecs
    calling aio_setup+0x0/0x78
    initcall aio_setup+0x0/0x78 returned 0 after 0 msecs
    calling inotify_setup+0x0/0x17
    initcall inotify_setup+0x0/0x17 returned 0 after 0 msecs
    calling inotify_user_setup+0x0/0xbd
    initcall inotify_user_setup+0x0/0xbd returned 0 after 0 msecs
    calling init_sys32_ioctl+0x0/0x8a
    initcall init_sys32_ioctl+0x0/0x8a returned 0 after 0 msecs
    calling dquot_init+0x0/0x108
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    initcall dquot_init+0x0/0x108 returned 0 after 0 msecs
    calling init_v2_quota_format+0x0/0x17
    initcall init_v2_quota_format+0x0/0x17 returned 0 after 0 msecs
    calling dnotify_init+0x0/0x2f
    initcall dnotify_init+0x0/0x2f returned 0 after 0 msecs
    calling vmcore_init+0x0/0x860
    initcall vmcore_init+0x0/0x860 returned 0 after 0 msecs
    calling init_devpts_fs+0x0/0x44
    initcall init_devpts_fs+0x0/0x44 returned 0 after 0 msecs
    calling init_ramfs_fs+0x0/0x17
    initcall init_ramfs_fs+0x0/0x17 returned 0 after 0 msecs
    calling init_hugetlbfs_fs+0x0/0x9d
    initcall init_hugetlbfs_fs+0x0/0x9d returned 0 after 0 msecs
    calling init_iso9660_fs+0x0/0x76
    initcall init_iso9660_fs+0x0/0x76 returned 0 after 0 msecs
    calling init_nls_cp437+0x0/0x17
    initcall init_nls_cp437+0x0/0x17 returned 0 after 0 msecs
    calling init_nls_ascii+0x0/0x17
    initcall init_nls_ascii+0x0/0x17 returned 0 after 0 msecs
    calling ipc_init+0x0/0x28
    msgmni has been set to 5936
    initcall ipc_init+0x0/0x28 returned 0 after 0 msecs
    calling ipc_sysctl_init+0x0/0x19
    initcall ipc_sysctl_init+0x0/0x19 returned 0 after 0 msecs
    calling init_mqueue_fs+0x0/0xdb
    initcall init_mqueue_fs+0x0/0xdb returned 0 after 0 msecs
    calling key_proc_init+0x0/0x5e
    initcall key_proc_init+0x0/0x5e returned 0 after 0 msecs
    calling selinux_nf_ip_init+0x0/0x7f
    SELinux: Registering netfilter hooks
    initcall selinux_nf_ip_init+0x0/0x7f returned 0 after 0 msecs
    calling init_sel_fs+0x0/0x6d
    initcall init_sel_fs+0x0/0x6d returned 0 after 1 msecs
    calling selnl_init+0x0/0x52
    initcall selnl_init+0x0/0x52 returned 0 after 0 msecs
    calling sel_netif_init+0x0/0x6b
    initcall sel_netif_init+0x0/0x6b returned 0 after 0 msecs
    calling sel_netnode_init+0x0/0x78
    initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs
    calling sel_netport_init+0x0/0x78
    initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs
    calling aurule_init+0x0/0x3c
    initcall aurule_init+0x0/0x3c returned 0 after 0 msecs
    calling crypto_algapi_init+0x0/0x12
    initcall crypto_algapi_init+0x0/0x12 returned 0 after 0 msecs
    calling cryptomgr_init+0x0/0x17
    initcall cryptomgr_init+0x0/0x17 returned 0 after 0 msecs
    calling hmac_module_init+0x0/0x17
    initcall hmac_module_init+0x0/0x17 returned 0 after 0 msecs
    calling md5_mod_init+0x0/0x17
    initcall md5_mod_init+0x0/0x17 returned 0 after 0 msecs
    calling sha1_generic_mod_init+0x0/0x17
    initcall sha1_generic_mod_init+0x0/0x17 returned 0 after 0 msecs
    calling bsg_init+0x0/0x128
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    initcall bsg_init+0x0/0x128 returned 0 after 0 msecs
    calling noop_init+0x0/0x19
    io scheduler noop registered
    initcall noop_init+0x0/0x19 returned 0 after 0 msecs
    calling as_init+0x0/0x19
    io scheduler anticipatory registered
    initcall as_init+0x0/0x19 returned 0 after 0 msecs
    calling deadline_init+0x0/0x19
    io scheduler deadline registered
    initcall deadline_init+0x0/0x19 returned 0 after 0 msecs
    calling cfq_init+0x0/0x99
    io scheduler cfq registered (default)
    initcall cfq_init+0x0/0x99 returned 0 after 0 msecs
    calling debug_objects_init_debugfs+0x0/0x64
    initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 msecs
    calling percpu_counter_startup+0x0/0x14
    initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
    calling pci_init+0x0/0x3a
    pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
    pci 0000:00:1d.0: Performing full reset
    pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.1: Performing full reset
    pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.2: Performing full reset
    pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.3: Performing full reset
    pci 0000:01:00.0: Boot video device
    initcall pci_init+0x0/0x3a returned 0 after 1 msecs
    calling pci_proc_init+0x0/0x70
    initcall pci_proc_init+0x0/0x70 returned 0 after 0 msecs
    calling pcie_portdrv_init+0x0/0x52
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    pcieport-driver 0000:00:01.0: found MSI capability
    pci_express 0000:00:01.0cie00: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    pcieport-driver 0000:00:1c.0: found MSI capability
    pci_express 0000:00:1c.0cie00: allocate port service
    pci_express 0000:00:1c.0cie02: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    pcieport-driver 0000:00:1c.1: found MSI capability
    pci_express 0000:00:1c.1cie00: allocate port service
    pci_express 0000:00:1c.1cie02: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    pcieport-driver 0000:00:1c.2: found MSI capability
    pci_express 0000:00:1c.2cie00: allocate port service
    pci_express 0000:00:1c.2cie02: allocate port service
    initcall pcie_portdrv_init+0x0/0x52 returned 0 after 5 msecs
    calling aer_service_init+0x0/0x25
    initcall aer_service_init+0x0/0x25 returned 0 after 0 msecs
    calling pci_hotplug_init+0x0/0x22
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    initcall pci_hotplug_init+0x0/0x22 returned 0 after 0 msecs
    calling fb_console_init+0x0/0x12b
    initcall fb_console_init+0x0/0x12b returned 0 after 0 msecs
    calling vesafb_init+0x0/0x23f
    initcall vesafb_init+0x0/0x23f returned 0 after 0 msecs
    calling efifb_init+0x0/0x1f2
    initcall efifb_init+0x0/0x1f2 returned -19 after 0 msecs
    calling acpi_reserve_resources+0x0/0xf0
    initcall acpi_reserve_resources+0x0/0xf0 returned 0 after 0 msecs
    calling acpi_button_init+0x0/0x63
    input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID0]
    input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    ACPI: Power Button (CM) [PWRB]
    input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    ACPI: Sleep Button (CM) [SLPB]
    initcall acpi_button_init+0x0/0x63 returned 0 after 4 msecs
    calling acpi_fan_init+0x0/0x63
    initcall acpi_fan_init+0x0/0x63 returned 0 after 0 msecs
    calling irqrouter_init_sysfs+0x0/0x3d
    initcall irqrouter_init_sysfs+0x0/0x3d returned 0 after 0 msecs
    calling acpi_processor_init+0x0/0x10f
    ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
    ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
    ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    initcall acpi_processor_init+0x0/0x10f returned 0 after 25 msecs
    calling acpi_container_init+0x0/0x47
    initcall acpi_container_init+0x0/0x47 returned 0 after 25 msecs
    calling acpi_thermal_init+0x0/0x88
    initcall acpi_thermal_init+0x0/0x88 returned 0 after 0 msecs
    calling rand_initialize+0x0/0x31
    initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs
    calling tty_init+0x0/0x1ca
    initcall tty_init+0x0/0x1ca returned 0 after 28 msecs
    calling pty_init+0x0/0x278
    initcall pty_init+0x0/0x278 returned 0 after 0 msecs
    calling hpet_init+0x0/0x6f
    hpet_resources: 0xfed00000 is busy
    initcall hpet_init+0x0/0x6f returned 0 after 1 msecs
    calling nvram_init+0x0/0x8f
    Non-volatile memory driver v1.2
    initcall nvram_init+0x0/0x8f returned 0 after 0 msecs
    calling agp_init+0x0/0x2b
    Linux agpgart interface v0.103
    initcall agp_init+0x0/0x2b returned 0 after 0 msecs
    calling agp_intel_init+0x0/0x2e
    initcall agp_intel_init+0x0/0x2e returned 0 after 0 msecs
    calling agp_sis_init+0x0/0x2e
    initcall agp_sis_init+0x0/0x2e returned 0 after 0 msecs
    calling agp_via_init+0x0/0x2e
    initcall agp_via_init+0x0/0x2e returned 0 after 0 msecs
    calling cn_proc_init+0x0/0x42
    initcall cn_proc_init+0x0/0x42 returned 0 after 0 msecs
    calling serial8250_init+0x0/0x148
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    initcall serial8250_init+0x0/0x148 returned 0 after 2 msecs
    calling serial8250_pnp_init+0x0/0x17
    initcall serial8250_pnp_init+0x0/0x17 returned 0 after 0 msecs
    calling serial8250_pci_init+0x0/0x20
    initcall serial8250_pci_init+0x0/0x20 returned 0 after 0 msecs
    calling init_kgdboc+0x0/0x1b
    initcall init_kgdboc+0x0/0x1b returned 0 after 0 msecs
    calling topology_sysfs_init+0x0/0x5e
    initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 msecs
    calling brd_init+0x0/0x172
    brd: module loaded
    initcall brd_init+0x0/0x172 returned 0 after 11 msecs
    calling init_kgdbts+0x0/0x1b
    initcall init_kgdbts+0x0/0x1b returned 0 after 0 msecs
    calling net_olddevs_init+0x0/0xa3
    initcall net_olddevs_init+0x0/0xa3 returned 0 after 0 msecs
    calling mac_hid_init+0x0/0xd7
    input: Macintosh mouse button emulation as /devices/virtual/input/input4
    initcall mac_hid_init+0x0/0xd7 returned 0 after 0 msecs
    calling init_sd+0x0/0xfd
    Driver 'sd' needs updating - please use bus_type methods
    initcall init_sd+0x0/0xfd returned 0 after 0 msecs
    calling init_sg+0x0/0x145
    initcall init_sg+0x0/0x145 returned 0 after 0 msecs
    calling nonstatic_sysfs_init+0x0/0x17
    initcall nonstatic_sysfs_init+0x0/0x17 returned 0 after 0 msecs
    calling yenta_socket_init+0x0/0x20
    initcall yenta_socket_init+0x0/0x20 returned 0 after 0 msecs
    calling mon_init+0x0/0x11c
    initcall mon_init+0x0/0x11c returned 0 after 0 msecs
    calling i8042_init+0x0/0x371
    PNP: No PS/2 controller found. Probing ports directly.
    i8042.c: No controller found.
    initcall i8042_init+0x0/0x371 returned -19 after 2 msecs
    calling serport_init+0x0/0x39
    initcall serport_init+0x0/0x39 returned 0 after 0 msecs
    calling mousedev_init+0x0/0x67
    mice: PS/2 mouse device common for all mice
    initcall mousedev_init+0x0/0x67 returned 0 after 4 msecs
    calling evdev_init+0x0/0x17
    initcall evdev_init+0x0/0x17 returned 0 after 24 msecs
    calling atkbd_init+0x0/0x2c
    initcall atkbd_init+0x0/0x2c returned 0 after 0 msecs
    calling psmouse_init+0x0/0x78
    initcall psmouse_init+0x0/0x78 returned 0 after 0 msecs
    calling cmos_init+0x0/0x35
    rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    initcall cmos_init+0x0/0x35 returned 0 after 0 msecs
    calling init_ladder+0x0/0x17
    cpuidle: using governor ladder
    initcall init_ladder+0x0/0x17 returned 0 after 1 msecs
    calling init_menu+0x0/0x17
    cpuidle: using governor menu
    initcall init_menu+0x0/0x17 returned 0 after 3 msecs
    calling efivars_init+0x0/0x1f5
    initcall efivars_init+0x0/0x1f5 returned -19 after 0 msecs
    calling hid_init+0x0/0x10
    initcall hid_init+0x0/0x10 returned 0 after 0 msecs
    calling hid_init+0x0/0x67
    Marking TSC unstable due to TSC halts in idle
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    initcall hid_init+0x0/0x67 returned 0 after 1 msecs
    calling sysctl_core_init+0x0/0x17
    initcall sysctl_core_init+0x0/0x17 returned 0 after 0 msecs
    calling flow_cache_init+0x0/0x1ca
    initcall flow_cache_init+0x0/0x1ca returned 0 after 0 msecs
    calling llc_init+0x0/0x25
    initcall llc_init+0x0/0x25 returned 0 after 0 msecs
    calling snap_init+0x0/0x36
    initcall snap_init+0x0/0x36 returned 0 after 0 msecs
    calling rif_init+0x0/0x9a
    initcall rif_init+0x0/0x9a returned 0 after 0 msecs
    calling blackhole_module_init+0x0/0x17
    initcall blackhole_module_init+0x0/0x17 returned 0 after 0 msecs
    calling sysctl_ipv4_init+0x0/0x53
    initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 1 msecs
    calling init_syncookies+0x0/0x1e
    initcall init_syncookies+0x0/0x1e returned 0 after 0 msecs
    calling ipv4_netfilter_init+0x0/0x17
    initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs
    calling cubictcp_register+0x0/0x6a
    TCP cubic registered
    initcall cubictcp_register+0x0/0x6a returned 0 after 0 msecs
    calling xfrm_user_init+0x0/0x5e
    Initializing XFRM netlink socket
    initcall xfrm_user_init+0x0/0x5e returned 0 after 0 msecs
    calling packet_init+0x0/0x4c
    NET: Registered protocol family 17
    initcall packet_init+0x0/0x4c returned 0 after 0 msecs
    calling hpet_insert_resource+0x0/0x28
    initcall hpet_insert_resource+0x0/0x28 returned 0 after 0 msecs
    calling update_mp_table+0x0/0x61b
    initcall update_mp_table+0x0/0x61b returned 0 after 0 msecs
    calling lapic_insert_resource+0x0/0x45
    initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 msecs
    calling init_lapic_nmi_sysfs+0x0/0x3d
    initcall init_lapic_nmi_sysfs+0x0/0x3d returned 0 after 0 msecs
    calling ioapic_insert_resources+0x0/0x54
    initcall ioapic_insert_resources+0x0/0x54 returned 0 after 0 msecs
    calling check_early_ioremap_leak+0x0/0x49
    initcall check_early_ioremap_leak+0x0/0x49 returned 0 after 0 msecs
    calling sched_init_debug+0x0/0x24
    initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs
    calling init_oops_id+0x0/0x28
    initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs
    calling disable_boot_consoles+0x0/0x3f
    initcall disable_boot_consoles+0x0/0x3f returned 0 after 0 msecs
    calling pm_qos_power_init+0x0/0xcf
    initcall pm_qos_power_init+0x0/0xcf returned 0 after 0 msecs
    calling software_resume+0x0/0x1ba
    initcall software_resume+0x0/0x1ba returned -2 after 0 msecs
    initcall software_resume+0x0/0x1ba returned with error code -2
    calling debugfs_kprobe_init+0x0/0x8e
    initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 0 msecs
    calling taskstats_init+0x0/0x9a
    registered taskstats version 1
    initcall taskstats_init+0x0/0x9a returned 0 after 0 msecs
    calling fail_page_alloc_debugfs+0x0/0xe9
    initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 msecs
    calling fail_make_request_debugfs+0x0/0x1e
    initcall fail_make_request_debugfs+0x0/0x1e returned 0 after 0 msecs
    calling random32_reseed+0x0/0x7e
    initcall random32_reseed+0x0/0x7e returned 0 after 0 msecs
    calling pci_sysfs_init+0x0/0x51
    initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 msecs
    calling acpi_wakeup_device_init+0x0/0xb6
    initcall acpi_wakeup_device_init+0x0/0xb6 returned 0 after 0 msecs
    calling acpi_sleep_proc_init+0x0/0x5a
    initcall acpi_sleep_proc_init+0x0/0x5a returned 0 after 0 msecs
    calling seqgen_init+0x0/0x14
    initcall seqgen_init+0x0/0x14 returned 0 after 0 msecs
    calling late_resume_init+0x0/0x112
    Magic number: 0:218:810
    initcall late_resume_init+0x0/0x112 returned 0 after 0 msecs
    calling scsi_complete_async_scans+0x0/0xf4
    initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 0 msecs
    calling memmap_init+0x0/0x9d
    initcall memmap_init+0x0/0x9d returned 0 after 0 msecs
    calling pci_mmcfg_late_insert_resources+0x0/0x48
    initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned 1 after 0 msecs
    initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned with error code 1
    calling tcp_congestion_default+0x0/0x17
    initcall tcp_congestion_default+0x0/0x17 returned 0 after 0 msecs
    debug: unmapping init memory ffffffff814eb000..ffffffff8166d000
    Write protecting the kernel read-only data: 1368k
    ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file 'devices'
    drivers/usb/core/inode.c: creating file '001'
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
    ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: default language 0x0409
    usb usb1: uevent
    Clocksource tsc unstable (delta = -253155005 ns)
    usb usb1: usb_probe_device
    usb usb1: configuration #1 chosen from 1 choice
    usb usb1: adding 1-0:1.0 (config #1, interface 0)
    usb 1-0:1.0: uevent
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: no power switching (usb 1.0)
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: power on to power good time: 20ms
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
    drivers/usb/core/inode.c: creating file '001'
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    modprobe used greatest stack depth: 3840 bytes left
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd: block sizes: ed 80 td 96
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '002'
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: detected 2 ports
    uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.0: Performing full reset
    uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    usb usb2: default language 0x0409
    usb usb2: uevent
    usb usb2: usb_probe_device
    usb usb2: configuration #1 chosen from 1 choice
    usb usb2: adding 2-0:1.0 (config #1, interface 0)
    usb 2-0:1.0: uevent
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: no power switching (usb 1.0)
    hub 2-0:1.0: individual port over-current protection
    hub 2-0:1.0: power on to power good time: 2ms
    hub 2-0:1.0: local power source is good
    hub 2-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
    drivers/usb/core/inode.c: creating file '001'
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '003'
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: detected 2 ports
    uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.1: Performing full reset
    uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    usb usb3: default language 0x0409
    usb usb3: uevent
    usb usb3: usb_probe_device
    usb usb3: configuration #1 chosen from 1 choice
    usb usb3: adding 3-0:1.0 (config #1, interface 0)
    usb 3-0:1.0: uevent
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: no power switching (usb 1.0)
    hub 3-0:1.0: individual port over-current protection
    hub 3-0:1.0: power on to power good time: 2ms
    hub 3-0:1.0: local power source is good
    hub 3-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 2 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
    drivers/usb/core/inode.c: creating file '001'
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '004'
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: detected 2 ports
    uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.2: Performing full reset
    uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    usb usb4: default language 0x0409
    usb usb4: uevent
    usb usb4: usb_probe_device
    usb usb4: configuration #1 chosen from 1 choice
    usb usb4: adding 4-0:1.0 (config #1, interface 0)
    usb 4-0:1.0: uevent
    hub 4-0:1.0: usb_probe_interface
    hub 4-0:1.0: usb_probe_interface - got id
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    hub 4-0:1.0: standalone hub
    hub 4-0:1.0: no power switching (usb 1.0)
    hub 4-0:1.0: individual port over-current protection
    hub 4-0:1.0: power on to power good time: 2ms
    hub 4-0:1.0: local power source is good
    hub 4-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
    drivers/usb/core/inode.c: creating file '001'
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '005'
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: detected 2 ports
    uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.3: Performing full reset
    uhci_hcd 0000:00:1d.3: supports USB remote wakeup
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    usb usb5: default language 0x0409
    usb usb5: uevent
    usb usb5: usb_probe_device
    usb usb5: configuration #1 chosen from 1 choice
    usb usb5: adding 5-0:1.0 (config #1, interface 0)
    usb 5-0:1.0: uevent
    hub 5-0:1.0: usb_probe_interface
    hub 5-0:1.0: usb_probe_interface - got id
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    hub 5-0:1.0: standalone hub
    hub 5-0:1.0: no power switching (usb 1.0)
    hub 5-0:1.0: individual port over-current protection
    hub 5-0:1.0: power on to power good time: 2ms
    hub 5-0:1.0: local power source is good
    hub 5-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: port 4 high speed
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    usb 1-4: new high speed USB device using ehci_hcd and address 3
    drivers/usb/core/inode.c: creating file '001'
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.3
    ehci_hcd 0000:00:1d.7: port 4 high speed
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    ata_piix 0000:00:1f.1: version 2.12
    ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    usb 1-4: uevent
    usb 1-4: usb_probe_device
    usb 1-4: configuration #1 chosen from 1 choice
    usb 1-4: adding 1-4:1.0 (config #1, interface 0)
    usb 1-4:1.0: uevent
    drivers/usb/core/inode.c: creating file '003'
    usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
    usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
    ata1.00: ATAPI: MAT****ADVD-R UJ-85J, FAV1, max UDMA/66
    ata1.00: configured for UDMA/66
    hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
    ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 6 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
    isa bounce pool size: 16 pages
    scsi 0:0:0:0: CD-ROM MAT****A DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5
    scsi 0:0:0:0: Attached scsi generic sg0 type 5
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
    hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
    ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 7 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
    hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
    hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100
    ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4)
    ata3.01: configured for UDMA/100
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    usb 2-2: ep0 maxpacket = 8
    usb 2-2: USB quirks for this device: 2
    scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
    sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    sd 2:0:1:0: [sda] Write Protect is off
    sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    sd 2:0:1:0: [sda] Write Protect is off
    sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<7>usb 2-2: skipped 1 descriptor after interface
    usb 2-2: skipped 1 descriptor after interface
    usb 2-2: skipped 1 descriptor after interface
    usb 2-2: default language 0x0409
    usb 2-2: uevent
    usb 2-2: usb_probe_device
    usb 2-2: configuration #1 chosen from 1 choice
    usb 2-2: adding 2-2:1.0 (config #1, interface 0)
    usb 2-2:1.0: uevent
    usbhid 2-2:1.0: usb_probe_interface
    usbhid 2-2:1.0: usb_probe_interface - got id
    input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us
    input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
    usb 2-2: adding 2-2:1.1 (config #1, interface 1)
    usb 2-2:1.1: uevent
    usbhid 2-2:1.1: usb_probe_interface
    usbhid 2-2:1.1: usb_probe_interface - got id
    usb 2-2: adding 2-2:1.2 (config #1, interface 2)
    usb 2-2:1.2: uevent
    usbhid 2-2:1.2: usb_probe_interface
    usbhid 2-2:1.2: usb_probe_interface - got id
    input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6
    sda1 sda2 sda3 sda4 sda5
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us
    sd 2:0:1:0: [sda] Attached SCSI disk
    sd 2:0:1:0: Attached scsi generic sg1 type 0
    modprobe used greatest stack depth: 2304 bytes left
    input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
    drivers/usb/core/inode.c: creating file '002'
    usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
    usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: Apple Internal Keyboard / Trackpad
    usb 2-2: Manufacturer: Apple Computer
    hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
    hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
    hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
    hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
    hub 4-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    usb 4-2: new full speed USB device using uhci_hcd and address 2
    usb 4-2: ep0 maxpacket = 8
    usb 4-2: skipped 1 descriptor after interface
    usb 4-2: default language 0x0409
    usb 4-2: uevent
    usb 4-2: usb_probe_device
    usb 4-2: configuration #1 chosen from 1 choice
    usb 4-2: adding 4-2:1.0 (config #1, interface 0)
    usb 4-2:1.0: uevent
    usbhid 4-2:1.0: usb_probe_interface
    usbhid 4-2:1.0: usb_probe_interface - got id
    drivers/usb/core/file.c: looking for a minor, starting at 96
    hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
    drivers/usb/core/inode.c: creating file '002'
    usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
    usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 4-2: Product: IR Receiver
    usb 4-2: Manufacturer: Apple Computer, Inc.
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
    uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
    hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
    hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
    usb 5-1: new full speed USB device using uhci_hcd and address 2
    usb 5-1: skipped 1 descriptor after interface
    usb 5-1: skipped 1 descriptor after interface
    usb 5-1: uevent
    usb 5-1: usb_probe_device
    usb 5-1: configuration #1 chosen from 1 choice
    usb 5-1: adding 5-1:1.0 (config #1, interface 0)
    usb 5-1:1.0: uevent
    usbhid 5-1:1.0: usb_probe_interface
    usbhid 5-1:1.0: usb_probe_interface - got id
    input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
    input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
    usb 5-1: adding 5-1:1.1 (config #1, interface 1)
    usb 5-1:1.1: uevent
    usbhid 5-1:1.1: usb_probe_interface
    usbhid 5-1:1.1: usb_probe_interface - got id
    input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8
    input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
    drivers/usb/core/inode.c: creating file '002'
    usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
    usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
    usb usb3: suspend_rh (auto-stop)
    hub 3-0:1.0: hub_suspend
    usb usb3: bus auto-suspend
    usb usb3: suspend_rh
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    type=1404 audit(1216428642.430:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
    SELinux: 8192 avtab hash slots, 171021 rules.
    SELinux: 8192 avtab hash slots, 171021 rules.
    SELinux: 8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats
    SELinux: 72 classes, 171021 rules
    SELinux: permission open in class dir not defined in policy
    SELinux: permission open in class file not defined in policy
    SELinux: permission open in class chr_file not defined in policy
    SELinux: permission open in class blk_file not defined in policy
    SELinux: permission open in class fifo_file not defined in policy
    SELinux: the above unknown classes and permissions will be allowed
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev sda5, type ext3), uses xattr
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    type=1403 audit(1216428643.293:3): policy loaded auid=4294967295 ses=4294967295
    usb usb2: uevent
    usb 2-0:1.0: uevent
    usb 2-2: uevent
    usb 2-2:1.0: uevent
    usb 2-2:1.1: uevent
    usb 2-2:1.2: uevent
    usb usb3: uevent
    usb 3-0:1.0: uevent
    usb usb4: uevent
    usb 4-0:1.0: uevent
    usb 4-2: uevent
    usb 4-2:1.0: uevent
    usb usb5: uevent
    usb 5-0:1.0: uevent
    usb 5-1: uevent
    usb 5-1:1.0: uevent
    usb 5-1:1.1: uevent
    usb usb1: uevent
    usb 1-0:1.0: uevent
    usb 1-4: uevent
    usb 1-4:1.0: uevent
    intel_rng: FWH not detected
    isight_firmware 1-4:1.0: usb_probe_interface
    isight_firmware 1-4:1.0: usb_probe_interface - got id
    firmware: requesting isight.fw
    ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    ath5k_pci 0000:03:00.0: registered as 'phy0'
    ath5k phy0: Device not yet supported.
    ath5k_pci 0000:03:00.0: PCI INT A disabled
    sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    sky2 0000:02:00.0: v1.21 addr 0xd8200000 irq 16 Yukon-EC (0xb6) rev 2
    sky2 eth0: addr 00:17:f2:d1:e0:6f
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input9
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    iTCO_vendor_support: vendor-support=0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    input: PC Speaker as /devices/platform/pcspkr/input/input10
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
    ACPI: Device needs an ACPI driver
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: AC Adapter [ADP1] (on-line)
    firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
    Unable to load isight firmware
    appletouch 2-2:1.1: usb_probe_interface
    appletouch 2-2:1.1: usb_probe_interface - got id
    usbcore: registered new interface driver isight_firmware
    appletouch: Geyser mode initialized.
    input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input11
    usbcore: registered new interface driver appletouch
    firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800
    ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
    ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    [drm] Initialized radeon 1.29.0 20080528 on minor 0
    [drm] Setting GART location based on new memory map
    [drm] Loading R500 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 1 usecs
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    appletouch: incomplete data package (first byte: 2, length: 4).
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
    device-mapper: multipath: version 1.0.5 loaded
    EXT3 FS on sda5, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda3, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    IA-32 Microcode Update Driver: v1.14a
    firmware: requesting intel-ucode/06-0f-06
    firmware: requesting intel-ucode/06-0f-06
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
    fuse init (API version 7.9)
    SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
    usb usb3: usb auto-resume
    usb usb3: wakeup_rh
    hub 3-0:1.0: hub_resume
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    usb usb3: suspend_rh (auto-stop)
    uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us
    uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us
    hub 3-0:1.0: hub_suspend
    usb usb3: bus auto-suspend
    usb usb3: suspend_rh
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.9
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.8
    Bluetooth: BNEP (Ethernet Emulation) ver 1.2
    Bluetooth: BNEP filters: protocol multicast
    Bridge firewalling registered
    pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    [drm] Num pipes: 1
    [drm] Setting GART location based on new memory map
    [drm] Loading R500 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 1 usecs
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    ath0: no IPv6 routers present
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  17. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    YH,
    The mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch both applied
    cleanly to the current linus kernel git and solve my problems with MMCONFIG not starting.
    I am attaching a dmesg log below of a boot with 'debug apic=verbose initcall_debug pci=routeirq'.
    If you look at the section immediately before the line...

    pci 0000:00:1e.0: transparent bridge

    you will see that it is radically different from what I posted for the freeze under PCIEASPM
    with MMCONFIG (using your original mmconfig patch)...

    PCI: 0000:00:1f.1 reg 10 io port: [ 40d8, 40df]
    PCI: 0000:00:1f.1 reg 14 io port: [ 40ec, 40ef]
    PCI: 0000:00:1f.1 reg 18 io port: [ 40d0, 40d7]
    PCI: 0000:00:1f.1 reg 1c io port: [ 40e8, 40eb]
    PCI: 0000:00:1f.1 reg 20 io port: [ 40b0, 40bf]
    pci 0000:00.1f.1: calling pci_fixup_transparent_bridge+0x0/0x2a
    PCI: Found 0000:00:1f.2 [8086/27c4] 000101 00
    PCI: 0000:00:1f.2 reg 10 io port: [ 40c8, 40cf]
    PCI: 0000:00:1f.2 reg 14 io port: [ 40e4, 40e7]
    PCI: 0000:00:1f.2 reg 18 io port: [ 40c0, 40c7]
    PCI: 0000:00:1f.2 reg 1c io port: [ 40e0, 40e3]
    PCI: 0000:00:1f.2 reg 20 io port: [ 40a0, 40af]
    PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
    pci: 0000:00:1f.2 calling pci_fixup_transparent_bridge+0x0/0x2a
    PCI: Found 0000:00:1f.3 [8086/27da] 000c05 00
    PCI: 0000:00:1f.3 reg 20 io port: [ efa0, efbf]
    PCI: 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
    PCI: Fixups for bus 0000:00
    PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
    PCI: Scanning bus 0000:01
    PCI: Found 0000:01:00.0 [1002/71c5] 000300 00
    PCI: 0000:00:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
    PCI: 0000:00:01:00.0 reg 14 io port: [ 3000, 30ff]
    PCI: 0000:00:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]

    Perhaps one of the PCIEASPM experts can explain why there are so
    many calls to pci_fixup_transparent_bridge and a scan behind the bridge.
    Nothing like that appears in the dmesg from your latest patch without
    PCIEASPM.
    Jack

    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.27-0.156.rc0.git4.fc9.x86_64 (howarth@localhost.localdomain) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jul 18 22:02:40 EDT 2008
    Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable)
    BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS)
    BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data)
    BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
    BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
    BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    init_memory_mapping
    0000000000 - 00bf000000 page 2M
    00bf000000 - 00bf0e9000 page 4k
    kernel direct mapping tables up to bf0e9000 @ 8000-d000
    last_map_addr: bf0e9000 end: bf0e9000
    RAMDISK: 37d35000 - 37fef5d1
    DMI 2.4 present.
    ACPI: RSDP 000FE020, 0024 (r2 APPLE )
    ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
    ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
    ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309)
    ACPI: FACS BFEC0000, 0040
    ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
    ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
    ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
    ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
    ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
    ACPI: DMI detected: Apple
    No NUMA configuration found
    Faking a node at 0000000000000000-00000000bf0e9000
    Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
    Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used
    Bootmem setup node 0 0000000000000000-00000000bf0e9000
    NODE_DATA [000000000000b000 - 000000000001ffff]
    bootmap [0000000000020000 - 0000000000037e1f] pages 18
    (6 early reservations) ==> bootmem
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 0000e5fe68] TEXT DATA BSS ==> [0000200000 - 0000e5fe68]
    #3 [0037d35000 - 0037fef5d1] RAMDISK ==> [0037d35000 - 0037fef5d1]
    #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
    Scan SMP from ffff880000000000 for 1024 bytes.
    Scan SMP from ffff88000009fc00 for 1024 bytes.
    Scan SMP from ffff8800000f0000 for 65536 bytes.
    Scan SMP from ffff88000009fc00 for 1024 bytes.
    [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00100000
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bf0e9
    On node 0 totalpages: 782472
    DMA zone: 96 pages used for memmap
    DMA zone: 3269 pages reserved
    DMA zone: 634 pages, LIFO batch:0
    DMA32 zone: 18246 pages used for memmap
    DMA32 zone: 760227 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    mapped APIC to ffffffffff5fc000 ( fee00000)
    mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
    PERCPU: Allocating 442304 bytes of per cpu data
    NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 760861
    Policy zone: DMA32
    Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    TSC calibrated against PM_TIMER
    Detected 2327.490 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    .... MAX_LOCKDEP_SUBCLASSES: 8
    .... MAX_LOCK_DEPTH: 48
    .... MAX_LOCKDEP_KEYS: 2048
    .... CLASSHASH_SIZE: 1024
    .... MAX_LOCKDEP_ENTRIES: 8192
    .... MAX_LOCKDEP_CHAINS: 16384
    .... CHAINHASH_SIZE: 8192
    memory used by lock dependency info: 1840 kB
    per task-struct memory footprint: 3456 bytes
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3039268k/3130276k available (3099k kernel code, 90620k reserved, 1746k data, 1544k init)
    CPA: page pool initialized 48 of 48 pages preallocated
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    hpet clockevent registered
    Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4654.98 BogoMIPS (lpj=2327490)
    Security Framework initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys devices
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 0/0 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20080609
    enabled ExtINT on CPU#0
    ENABLING IO-APIC IRQs
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 1-0 not connected.
    IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
    IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
    IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
    ...TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
    Using local APIC timer interrupts.
    APIC timer calibration result 10390580
    Detected 10.390 MHz APIC timer.
    lockdep: fixing up alternatives.
    Booting processor 1/1 ip 6000
    Initializing CPU#1
    masked ExtINT on CPU#1
    Calibrating delay using timer specific routine.. <6>4654.79 BogoMIPS (lpj=2327398)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 1/1 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (9309.77 BogoMIPS).
    sizeof(vma)=176 bytes
    sizeof(page)=96 bytes
    sizeof(inode)=1088 bytes
    sizeof(dentry)=256 bytes
    sizeof(ext3inode)=1488 bytes
    sizeof(buffer_head)=104 bytes
    sizeof(skbuff)=232 bytes
    sizeof(task_struct)=9528 bytes
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    khelper used greatest stack depth: 5648 bytes left
    calling init_cpufreq_transition_notifier_list+0x0/0x20
    initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs
    calling net_ns_init+0x0/0x134
    net_namespace: 1352 bytes
    initcall net_ns_init+0x0/0x134 returned 0 after 0 msecs
    calling cpufreq_tsc+0x0/0x16
    initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
    calling init_smp_flush+0x0/0x6b
    initcall init_smp_flush+0x0/0x6b returned 0 after 0 msecs
    calling print_banner+0x0/0x13
    Booting paravirtualized kernel on bare hardware
    initcall print_banner+0x0/0x13 returned 0 after 0 msecs
    calling sysctl_init+0x0/0x37
    initcall sysctl_init+0x0/0x37 returned 0 after 0 msecs
    calling ksysfs_init+0x0/0xc0
    initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs
    calling init_jiffies_clocksource+0x0/0x17
    initcall init_jiffies_clocksource+0x0/0x17 returned 0 after 0 msecs
    calling pm_init+0x0/0x39
    initcall pm_init+0x0/0x39 returned 0 after 0 msecs
    calling pm_disk_init+0x0/0x1e
    initcall pm_disk_init+0x0/0x1e returned 0 after 0 msecs
    calling swsusp_header_init+0x0/0x31
    initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs
    calling ftrace_dynamic_init+0x0/0xd7
    initcall ftrace_dynamic_init+0x0/0xd7 returned 0 after 0 msecs
    calling filelock_init+0x0/0x33
    initcall filelock_init+0x0/0x33 returned 0 after 0 msecs
    calling init_misc_binfmt+0x0/0x44
    initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 msecs
    calling init_script_binfmt+0x0/0x17
    initcall init_script_binfmt+0x0/0x17 returned 0 after 0 msecs
    calling init_elf_binfmt+0x0/0x17
    initcall init_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
    calling init_compat_elf_binfmt+0x0/0x17
    initcall init_compat_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
    calling debugfs_init+0x0/0x56
    initcall debugfs_init+0x0/0x56 returned 0 after 0 msecs
    calling securityfs_init+0x0/0x56
    initcall securityfs_init+0x0/0x56 returned 0 after 0 msecs
    calling random32_init+0x0/0x5f
    initcall random32_init+0x0/0x5f returned 0 after 0 msecs
    calling early_resume_init+0x0/0x1d4
    Time: 3:06:17 Date: 07/19/08
    initcall early_resume_init+0x0/0x1d4 returned 0 after 0 msecs
    calling cpufreq_core_init+0x0/0x8f
    initcall cpufreq_core_init+0x0/0x8f returned 0 after 0 msecs
    calling cpuidle_init+0x0/0x45
    initcall cpuidle_init+0x0/0x45 returned 0 after 0 msecs
    calling sock_init+0x0/0x63
    initcall sock_init+0x0/0x63 returned 0 after 0 msecs
    calling netpoll_init+0x0/0x46
    initcall netpoll_init+0x0/0x46 returned 0 after 0 msecs
    calling netlink_proto_init+0x0/0x150
    NET: Registered protocol family 16
    initcall netlink_proto_init+0x0/0x150 returned 0 after 0 msecs
    calling bdi_class_init+0x0/0x42
    initcall bdi_class_init+0x0/0x42 returned 0 after 0 msecs
    calling kobject_uevent_init+0x0/0x47
    initcall kobject_uevent_init+0x0/0x47 returned 0 after 0 msecs
    calling pcibus_class_init+0x0/0x17
    initcall pcibus_class_init+0x0/0x17 returned 0 after 0 msecs
    calling pci_driver_init+0x0/0x17
    initcall pci_driver_init+0x0/0x17 returned 0 after 0 msecs
    calling backlight_class_init+0x0/0x4e
    initcall backlight_class_init+0x0/0x4e returned 0 after 0 msecs
    calling dock_init+0x0/0x5f
    No dock devices found.
    initcall dock_init+0x0/0x5f returned 0 after 0 msecs
    calling tty_class_init+0x0/0x2f
    initcall tty_class_init+0x0/0x2f returned 0 after 0 msecs
    calling vtconsole_class_init+0x0/0xbf
    khelper used greatest stack depth: 4904 bytes left
    initcall vtconsole_class_init+0x0/0xbf returned 0 after 0 msecs
    calling register_node_type+0x0/0x83
    initcall register_node_type+0x0/0x83 returned 0 after 0 msecs
    calling enable_pci_io_ecs+0x0/0x33
    initcall enable_pci_io_ecs+0x0/0x33 returned 0 after 0 msecs
    calling early_fill_mp_bus_info+0x0/0x80c
    initcall early_fill_mp_bus_info+0x0/0x80c returned 0 after 0 msecs
    calling arch_kdebugfs_init+0x0/0x1e0
    initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 msecs
    calling mtrr_if_init+0x0/0x7e
    initcall mtrr_if_init+0x0/0x7e returned 0 after 0 msecs
    calling ffh_cstate_init+0x0/0x36
    initcall ffh_cstate_init+0x0/0x36 returned 0 after 0 msecs
    calling acpi_pci_init+0x0/0x45
    ACPI: bus type pci registered
    initcall acpi_pci_init+0x0/0x45 returned 0 after 0 msecs
    calling init_acpi_device_notify+0x0/0x50
    initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs
    calling dmi_id_init+0x0/0x2f1
    initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 msecs
    calling pci_arch_init+0x0/0x53
    PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
    PCI: MCFG area at f0000000 reserved in E820
    PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
    PCI: Using MMCONFIG at f0000000 - f3ffffff
    PCI: Using configuration type 1 for base access
    initcall pci_arch_init+0x0/0x53 returned 0 after 14 msecs
    calling topology_init+0x0/0x96
    initcall topology_init+0x0/0x96 returned 0 after 0 msecs
    calling mtrr_init_finialize+0x0/0x42
    initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 msecs
    calling param_sysfs_init+0x0/0x1f3
    initcall param_sysfs_init+0x0/0x1f3 returned 0 after 9 msecs
    calling pm_sysrq_init+0x0/0x1e
    initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs
    calling readahead_init+0x0/0x3d
    initcall readahead_init+0x0/0x3d returned 0 after 0 msecs
    calling init_bio+0x0/0xca
    initcall init_bio+0x0/0xca returned 0 after 0 msecs
    calling integrity_init+0x0/0x3f
    initcall integrity_init+0x0/0x3f returned 0 after 0 msecs
    calling blk_settings_init+0x0/0x2f
    initcall blk_settings_init+0x0/0x2f returned 0 after 0 msecs
    calling blk_ioc_init+0x0/0x2f
    initcall blk_ioc_init+0x0/0x2f returned 0 after 0 msecs
    calling genhd_device_init+0x0/0x5a
    initcall genhd_device_init+0x0/0x5a returned 0 after 0 msecs
    calling blk_dev_integrity_init+0x0/0x2f
    initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 msecs
    calling pci_slot_init+0x0/0x4c
    initcall pci_slot_init+0x0/0x4c returned 0 after 0 msecs
    calling fbmem_init+0x0/0x8f
    initcall fbmem_init+0x0/0x8f returned 0 after 0 msecs
    calling acpi_init+0x0/0x226
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    initcall acpi_init+0x0/0x226 returned 0 after 25 msecs
    calling acpi_scan_init+0x0/0x10f
    initcall acpi_scan_init+0x0/0x10f returned 0 after 52 msecs
    calling acpi_ec_init+0x0/0x66
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs
    calling acpi_pci_root_init+0x0/0x2d
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    PCI: 0000:00:07.0 reg 10 32bit mmio: [d8404000, d8404fff]
    PCI: 0000:00:1b.0 reg 10 64bit mmio: [d8400000, d8403fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f]
    PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f]
    PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f]
    PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f]
    PCI: 0000:00:1d.7 reg 10 32bit mmio: [d8405400, d84057ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
    PCI: 0000:00:1f.1 reg 10 io port: [40d8, 40df]
    PCI: 0000:00:1f.1 reg 14 io port: [40ec, 40ef]
    PCI: 0000:00:1f.1 reg 18 io port: [40d0, 40d7]
    PCI: 0000:00:1f.1 reg 1c io port: [40e8, 40eb]
    PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf]
    PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf]
    PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7]
    PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7]
    PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3]
    PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af]
    PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf]
    PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
    PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [d8300000, d83fffff]
    PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
    PCI: 0000:02:00.0 reg 10 64bit mmio: [d8200000, d8203fff]
    PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff]
    pci 0000:02:00.0: supports D1
    pci 0000:02:00.0: supports D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d82fffff]
    PCI: 0000:03:00.0 reg 10 64bit mmio: [d8100000, d810ffff]
    pci 0000:03:00.0: supports D1
    pci 0000:03:00.0: PME# supported from D0 D1 D3hot
    pci 0000:03:00.0: PME# disabled
    PCI: bridge 0000:00:1c.1 32bit mmio: [d8100000, d81fffff]
    PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
    PCI: bridge 0000:00:1c.2 32bit mmio: [d4100000, d80fffff]
    PCI: bridge 0000:00:1c.2 64bit mmio pref: [d0000000, d3ffffff]
    PCI: 0000:0c:03.0 reg 10 32bit mmio: [d4004000, d40047ff]
    PCI: 0000:0c:03.0 reg 14 32bit mmio: [d4000000, d4003fff]
    pci 0000:0c:03.0: supports D1
    pci 0000:0c:03.0: supports D2
    pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:0c:03.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    PCI: bridge 0000:00:1e.0 32bit mmio: [d4000000, d40fffff]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    initcall acpi_pci_root_init+0x0/0x2d returned 0 after 78 msecs
    calling acpi_pci_link_init+0x0/0x4d
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
    initcall acpi_pci_link_init+0x0/0x4d returned 0 after 14 msecs
    calling acpi_power_init+0x0/0x7c
    initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs
    calling acpi_system_init+0x0/0x265
    initcall acpi_system_init+0x0/0x265 returned 0 after 0 msecs
    calling acpi_cm_sbs_init+0x0/0xd
    initcall acpi_cm_sbs_init+0x0/0xd returned 0 after 0 msecs
    calling pnp_init+0x0/0x25
    Linux Plug and Play Support v0.97 (c) Adam Belay
    initcall pnp_init+0x0/0x25 returned 0 after 0 msecs
    calling pnpacpi_init+0x0/0x91
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
    pnp: PnP ACPI: found 9 devices
    ACPI: ACPI bus type pnp unregistered
    initcall pnpacpi_init+0x0/0x91 returned 0 after 20 msecs
    calling misc_init+0x0/0x9d
    initcall misc_init+0x0/0x9d returned 0 after 0 msecs
    calling cn_init+0x0/0xf3
    initcall cn_init+0x0/0xf3 returned 0 after 0 msecs
    calling init_scsi+0x0/0x96
    SCSI subsystem initialized
    initcall init_scsi+0x0/0x96 returned 0 after 1 msecs
    calling ata_init+0x0/0x368
    libata version 3.00 loaded.
    initcall ata_init+0x0/0x368 returned 0 after 0 msecs
    calling init_pcmcia_cs+0x0/0x2d
    initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 msecs
    calling usb_init+0x0/0x131
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    initcall usb_init+0x0/0x131 returned 0 after 1 msecs
    calling serio_init+0x0/0x8e
    initcall serio_init+0x0/0x8e returned 0 after 0 msecs
    calling input_init+0x0/0x10c
    initcall input_init+0x0/0x10c returned 0 after 0 msecs
    calling rtc_init+0x0/0x75
    initcall rtc_init+0x0/0x75 returned 0 after 0 msecs
    calling power_supply_class_init+0x0/0x39
    initcall power_supply_class_init+0x0/0x39 returned 0 after 0 msecs
    calling thermal_init+0x0/0x56
    initcall thermal_init+0x0/0x56 returned 0 after 0 msecs
    calling md_init+0x0/0xd5
    initcall md_init+0x0/0xd5 returned 0 after 0 msecs
    calling leds_init+0x0/0x2f
    initcall leds_init+0x0/0x2f returned 0 after 0 msecs
    calling dma_bus_init+0x0/0x31
    initcall dma_bus_init+0x0/0x31 returned 0 after 0 msecs
    calling pci_subsys_init+0x0/0x126
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    IOAPIC[0]: Set routing entry (1-16 -> 0x49 -> IRQ 16 Mode:1 Active:1)
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    IOAPIC[0]: Set routing entry (1-22 -> 0x51 -> IRQ 22 Mode:1 Active:1)
    pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    IOAPIC[0]: Set routing entry (1-17 -> 0x59 -> IRQ 17 Mode:1 Active:1)
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    IOAPIC[0]: Set routing entry (1-18 -> 0x61 -> IRQ 18 Mode:1 Active:1)
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    IOAPIC[0]: Set routing entry (1-23 -> 0x69 -> IRQ 23 Mode:1 Active:1)
    pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    IOAPIC[0]: Set routing entry (1-19 -> 0x71 -> IRQ 19 Mode:1 Active:1)
    pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    number of MP IRQ sources: 15.
    number of IO-APIC #1 registers: 24.
    testing the IO APIC.......................

    IO APIC #1......
    ..... register #00: 00000000
    ........ : physical APIC id: 00
    ..... register #01: 00170020
    ........ : max redirection entries: 0017
    ........ : PRQ implemented: 0
    ........ : IO APIC version: 0020
    ..... register #02: 00170020
    ........ : arbitration: 00
    ..... IRQ redirection table:
    NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
    00 000 1 0 0 0 0 0 0 00
    01 003 0 0 0 0 0 1 1 31
    02 003 0 0 0 0 0 1 1 30
    03 003 0 0 0 0 0 1 1 33
    04 003 0 0 0 0 0 1 1 34
    05 003 0 0 0 0 0 1 1 35
    06 003 0 0 0 0 0 1 1 36
    07 003 0 0 0 0 0 1 1 37
    08 003 0 0 0 0 0 1 1 38
    09 003 0 1 0 0 0 1 1 39
    0a 003 0 0 0 0 0 1 1 3A
    0b 003 0 0 0 0 0 1 1 3B
    0c 003 0 0 0 0 0 1 1 3C
    0d 003 0 0 0 0 0 1 1 3D
    0e 003 0 0 0 0 0 1 1 3E
    0f 003 0 0 0 0 0 1 1 3F
    10 003 1 1 0 1 0 1 1 49
    11 003 1 1 0 1 0 1 1 59
    12 003 1 1 0 1 0 1 1 61
    13 003 1 1 0 1 0 1 1 71
    14 000 1 0 0 0 0 0 0 00
    15 000 1 0 0 0 0 0 0 00
    16 003 1 1 0 1 0 1 1 51
    17 003 1 1 0 1 0 1 1 69
    IRQ to pin mappings:
    IRQ0 -> 0:2
    IRQ1 -> 0:1
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ9 -> 0:9
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    IRQ16 -> 0:16
    IRQ17 -> 0:17
    IRQ18 -> 0:18
    IRQ19 -> 0:19
    IRQ22 -> 0:22
    IRQ23 -> 0:23
    ..................................... done.
    initcall pci_subsys_init+0x0/0x126 returned 0 after 21 msecs
    calling proto_init+0x0/0x33
    initcall proto_init+0x0/0x33 returned 0 after 0 msecs
    calling net_dev_init+0x0/0x1f3
    initcall net_dev_init+0x0/0x1f3 returned 0 after 0 msecs
    calling neigh_init+0x0/0x76
    initcall neigh_init+0x0/0x76 returned 0 after 0 msecs
    calling fib_rules_init+0x0/0xab
    initcall fib_rules_init+0x0/0xab returned 0 after 0 msecs
    calling pktsched_init+0x0/0xc9
    initcall pktsched_init+0x0/0xc9 returned 0 after 0 msecs
    calling tc_filter_init+0x0/0x51
    initcall tc_filter_init+0x0/0x51 returned 0 after 0 msecs
    calling tc_action_init+0x0/0x51
    initcall tc_action_init+0x0/0x51 returned 0 after 0 msecs
    calling genl_init+0x0/0xdd
    initcall genl_init+0x0/0xdd returned 0 after 3 msecs
    calling cipso_v4_init+0x0/0x8d
    initcall cipso_v4_init+0x0/0x8d returned 0 after 0 msecs
    calling wireless_nlevent_init+0x0/0x46
    initcall wireless_nlevent_init+0x0/0x46 returned 0 after 0 msecs
    calling netlbl_init+0x0/0x86
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    initcall netlbl_init+0x0/0x86 returned 0 after 0 msecs
    calling sysctl_init+0x0/0x32
    initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs
    calling pci_iommu_init+0x0/0x21
    PCI-GART: No AMD northbridge found.
    initcall pci_iommu_init+0x0/0x21 returned 0 after 0 msecs
    calling hpet_late_init+0x0/0x107
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    initcall hpet_late_init+0x0/0x107 returned 0 after 1 msecs
    calling clocksource_done_booting+0x0/0x17
    initcall clocksource_done_booting+0x0/0x17 returned 0 after 0 msecs
    calling ftrace_init_debugfs+0x0/0xfd
    initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs
    calling tracer_alloc_buffers+0x0/0x5a1
    tracer: 1286 pages allocated for 65536 entries of 80 bytes
    actual entries 65586
    initcall tracer_alloc_buffers+0x0/0x5a1 returned 0 after 19 msecs
    calling init_pipe_fs+0x0/0x51
    initcall init_pipe_fs+0x0/0x51 returned 0 after 0 msecs
    calling init_mnt_writers+0x0/0x95
    initcall init_mnt_writers+0x0/0x95 returned 0 after 0 msecs
    calling eventpoll_init+0x0/0x9a
    initcall eventpoll_init+0x0/0x9a returned 0 after 0 msecs
    calling anon_inode_init+0x0/0x11c
    initcall anon_inode_init+0x0/0x11c returned 0 after 0 msecs
    calling acpi_rtc_init+0x0/0xf9
    ACPI: RTC can wake from S4
    initcall acpi_rtc_init+0x0/0xf9 returned 0 after 0 msecs
    calling acpi_event_init+0x0/0x85
    initcall acpi_event_init+0x0/0x85 returned 0 after 2 msecs
    calling pnp_system_init+0x0/0x17
    system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
    system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
    system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
    system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
    system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:07: ioport range 0x680-0x6ef has been reserved
    system 00:07: ioport range 0x800-0x80f has been reserved
    system 00:07: ioport range 0x810-0x817 has been reserved
    system 00:07: ioport range 0x400-0x47f has been reserved
    system 00:07: ioport range 0x500-0x53f has been reserved
    system 00:07: ioport range 0x1640-0x164f has been reserved
    initcall pnp_system_init+0x0/0x17 returned 0 after 2 msecs
    calling chr_dev_init+0x0/0x9d
    initcall chr_dev_init+0x0/0x9d returned 0 after 2 msecs
    calling firmware_class_init+0x0/0x77
    initcall firmware_class_init+0x0/0x77 returned 0 after 0 msecs
    calling loopback_init+0x0/0x17
    initcall loopback_init+0x0/0x17 returned 0 after 1 msecs
    calling init_pcmcia_bus+0x0/0x89
    initcall init_pcmcia_bus+0x0/0x89 returned 0 after 0 msecs
    calling cpufreq_gov_performance_init+0x0/0x17
    initcall cpufreq_gov_performance_init+0x0/0x17 returned 0 after 0 msecs
    calling cpufreq_gov_userspace_init+0x0/0x17
    initcall cpufreq_gov_userspace_init+0x0/0x17 returned 0 after 0 msecs
    calling init_acpi_pm_clocksource+0x0/0xae
    initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs
    calling pcibios_assign_resources+0x0/0x8d
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x3000-0x3fff
    pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: 0x2000-0x2fff
    pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff
    pci 0000:00:1c.0: PREFETCH window: 0x000000d8500000-0x000000d85fffff
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: disabled
    pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    pci 0000:00:1c.2: IO window: 0x1000-0x1fff
    pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff
    pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d3ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
    pci 0000:00:1e.0: IO window: disabled
    pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff
    pci 0000:00:1e.0: PREFETCH window: disabled
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    pci 0000:00:1e.0: power state changed by ACPI to D0
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffffffffffff]
    bus: 01 index 0 io port: [3000, 3fff]
    bus: 01 index 1 mmio: [d8300000, d83fffff]
    bus: 01 index 2 mmio: [c0000000, cfffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [2000, 2fff]
    bus: 02 index 1 mmio: [d8200000, d82fffff]
    bus: 02 index 2 mmio: [d8500000, d85fffff]
    bus: 02 index 3 mmio: [0, 0]
    bus: 03 index 0 mmio: [0, 0]
    bus: 03 index 1 mmio: [d8100000, d81fffff]
    bus: 03 index 2 mmio: [0, 0]
    bus: 03 index 3 mmio: [0, 0]
    bus: 04 index 0 io port: [1000, 1fff]
    bus: 04 index 1 mmio: [d4100000, d80fffff]
    bus: 04 index 2 mmio: [d0000000, d3ffffff]
    bus: 04 index 3 mmio: [0, 0]
    bus: 0c index 0 mmio: [0, 0]
    bus: 0c index 1 mmio: [d4000000, d40fffff]
    bus: 0c index 2 mmio: [0, 0]
    bus: 0c index 3 io port: [0, ffff]
    bus: 0c index 4 mmio: [0, ffffffffffffffff]
    initcall pcibios_assign_resources+0x0/0x8d returned 0 after 10 msecs
    calling inet_init+0x0/0x354
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    initcall inet_init+0x0/0x354 returned 0 after 39 msecs
    calling af_unix_init+0x0/0x5a
    NET: Registered protocol family 1
    initcall af_unix_init+0x0/0x5a returned 0 after 0 msecs
    calling populate_rootfs+0x0/0xf3
    checking if image is initramfs... it is
    debug: unmapping init memory ffff880037d35000..ffff880037ff0000
    initcall populate_rootfs+0x0/0xf3 returned 0 after 262 msecs
    calling calgary_fixup_tce_spaces+0x0/0xfe
    initcall calgary_fixup_tce_spaces+0x0/0xfe returned -19 after 0 msecs
    calling i8259A_init_sysfs+0x0/0x27
    initcall i8259A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
    calling vsyscall_init+0x0/0x71
    initcall vsyscall_init+0x0/0x71 returned 0 after 0 msecs
    calling sbf_init+0x0/0xf4
    initcall sbf_init+0x0/0xf4 returned 0 after 0 msecs
    calling i8237A_init_sysfs+0x0/0x27
    initcall i8237A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
    calling add_rtc_cmos+0x0/0x1d
    initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
    calling cache_sysfs_init+0x0/0x62
    initcall cache_sysfs_init+0x0/0x62 returned 0 after 2 msecs
    calling mce_init_device+0x0/0x8a
    initcall mce_init_device+0x0/0x8a returned 0 after 1 msecs
    calling periodic_mcheck_init+0x0/0x44
    initcall periodic_mcheck_init+0x0/0x44 returned 0 after 0 msecs
    calling thermal_throttle_init_device+0x0/0x92
    initcall thermal_throttle_init_device+0x0/0x92 returned 0 after 0 msecs
    calling threshold_init_device+0x0/0x4e
    initcall threshold_init_device+0x0/0x4e returned 0 after 0 msecs
    calling msr_init+0x0/0x124
    initcall msr_init+0x0/0x124 returned 0 after 0 msecs
    calling cpuid_init+0x0/0x124
    initcall cpuid_init+0x0/0x124 returned 0 after 0 msecs
    calling init_lapic_sysfs+0x0/0x32
    initcall init_lapic_sysfs+0x0/0x32 returned 0 after 0 msecs
    calling ioapic_init_sysfs+0x0/0xac
    initcall ioapic_init_sysfs+0x0/0xac returned 0 after 0 msecs
    calling add_pcspkr+0x0/0x45
    initcall add_pcspkr+0x0/0x45 returned 0 after 0 msecs
    calling uv_ptc_init+0x0/0x7a
    initcall uv_ptc_init+0x0/0x7a returned 0 after 0 msecs
    calling uv_bau_init+0x0/0x604
    initcall uv_bau_init+0x0/0x604 returned 0 after 0 msecs
    calling audit_classes_init+0x0/0xb4
    initcall audit_classes_init+0x0/0xb4 returned 0 after 0 msecs
    calling debug_pagealloc_proc_init+0x0/0x30
    initcall debug_pagealloc_proc_init+0x0/0x30 returned 0 after 0 msecs
    calling pt_dump_init+0x0/0x30
    initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs
    calling init_vdso_vars+0x0/0x219
    initcall init_vdso_vars+0x0/0x219 returned 0 after 0 msecs
    calling ia32_binfmt_init+0x0/0x19
    initcall ia32_binfmt_init+0x0/0x19 returned 0 after 0 msecs
    calling sysenter_setup+0x0/0x2ad
    initcall sysenter_setup+0x0/0x2ad returned 0 after 0 msecs
    calling init_sched_debug_procfs+0x0/0x2c
    initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs
    calling create_proc_profile+0x0/0x2cf
    initcall create_proc_profile+0x0/0x2cf returned 0 after 0 msecs
    calling ioresources_init+0x0/0x41
    initcall ioresources_init+0x0/0x41 returned 0 after 0 msecs
    calling uid_cache_init+0x0/0x92
    initcall uid_cache_init+0x0/0x92 returned 0 after 0 msecs
    calling init_posix_timers+0x0/0xa0
    initcall init_posix_timers+0x0/0xa0 returned 0 after 0 msecs
    calling init_posix_cpu_timers+0x0/0xb5
    initcall init_posix_cpu_timers+0x0/0xb5 returned 0 after 0 msecs
    calling nsproxy_cache_init+0x0/0x32
    initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 msecs
    calling timekeeping_init_device+0x0/0x27
    initcall timekeeping_init_device+0x0/0x27 returned 0 after 0 msecs
    calling init_clocksource_sysfs+0x0/0x55
    initcall init_clocksource_sysfs+0x0/0x55 returned 0 after 0 msecs
    calling init_timer_list_procfs+0x0/0x31
    initcall init_timer_list_procfs+0x0/0x31 returned 0 after 0 msecs
    calling init_tstats_procfs+0x0/0x31
    initcall init_tstats_procfs+0x0/0x31 returned 0 after 0 msecs
    calling lockdep_proc_init+0x0/0x7c
    initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 msecs
    calling futex_init+0x0/0xcc
    initcall futex_init+0x0/0xcc returned 0 after 0 msecs
    calling proc_dma_init+0x0/0x27
    initcall proc_dma_init+0x0/0x27 returned 0 after 0 msecs
    calling percpu_modinit+0x0/0x79
    initcall percpu_modinit+0x0/0x79 returned 0 after 0 msecs
    calling kallsyms_init+0x0/0x2a
    initcall kallsyms_init+0x0/0x2a returned 0 after 0 msecs
    calling snapshot_device_init+0x0/0x17
    initcall snapshot_device_init+0x0/0x17 returned 0 after 0 msecs
    calling crash_save_vmcoreinfo_init+0x0/0x430
    initcall crash_save_vmcoreinfo_init+0x0/0x430 returned 0 after 0 msecs
    calling crash_notes_memory_init+0x0/0x44
    initcall crash_notes_memory_init+0x0/0x44 returned 0 after 0 msecs
    calling pid_namespaces_init+0x0/0x32
    initcall pid_namespaces_init+0x0/0x32 returned 0 after 0 msecs
    calling audit_init+0x0/0x172
    audit: initializing netlink socket (disabled)
    type=2000 audit(1216436777.860:1): initialized
    initcall audit_init+0x0/0x172 returned 0 after 0 msecs
    calling audit_tree_init+0x0/0x4e
    initcall audit_tree_init+0x0/0x4e returned 0 after 0 msecs
    calling init_kprobes+0x0/0x124
    initcall init_kprobes+0x0/0x124 returned 0 after 4 msecs
    calling relay_init+0x0/0x19
    initcall relay_init+0x0/0x19 returned 0 after 0 msecs
    calling utsname_sysctl_init+0x0/0x19
    initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs
    calling init_lstats_procfs+0x0/0x2a
    initcall init_lstats_procfs+0x0/0x2a returned 0 after 0 msecs
    calling init_sched_switch_trace+0x0/0x41
    initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs
    calling init_stack_trace+0x0/0x12
    initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs
    calling init_function_trace+0x0/0x12
    initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs
    calling init_irqsoff_tracer+0x0/0x14
    initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 msecs
    calling init_wakeup_tracer+0x0/0x12
    initcall init_wakeup_tracer+0x0/0x12 returned 0 after 0 msecs
    calling init_per_zone_pages_min+0x0/0x46
    initcall init_per_zone_pages_min+0x0/0x46 returned 0 after 0 msecs
    calling pdflush_init+0x0/0x17
    initcall pdflush_init+0x0/0x17 returned 0 after 0 msecs
    calling kswapd_init+0x0/0x7d
    initcall kswapd_init+0x0/0x7d returned 0 after 0 msecs
    calling setup_vmstat+0x0/0x4f
    initcall setup_vmstat+0x0/0x4f returned 0 after 0 msecs
    calling procswaps_init+0x0/0x27
    initcall procswaps_init+0x0/0x27 returned 0 after 0 msecs
    calling hugetlb_init+0x0/0xa0
    Total HugeTLB memory allocated, 0
    initcall hugetlb_init+0x0/0xa0 returned 0 after 0 msecs
    calling init_tmpfs+0x0/0xdf
    initcall init_tmpfs+0x0/0xdf returned 0 after 0 msecs
    calling slab_sysfs_init+0x0/0xf5
    initcall slab_sysfs_init+0x0/0xf5 returned 0 after 30 msecs
    calling fasync_init+0x0/0x2f
    initcall fasync_init+0x0/0x2f returned 0 after 0 msecs
    calling aio_setup+0x0/0x78
    initcall aio_setup+0x0/0x78 returned 0 after 0 msecs
    calling inotify_setup+0x0/0x17
    initcall inotify_setup+0x0/0x17 returned 0 after 0 msecs
    calling inotify_user_setup+0x0/0xbd
    initcall inotify_user_setup+0x0/0xbd returned 0 after 0 msecs
    calling init_sys32_ioctl+0x0/0x8a
    initcall init_sys32_ioctl+0x0/0x8a returned 0 after 0 msecs
    calling dquot_init+0x0/0x108
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    initcall dquot_init+0x0/0x108 returned 0 after 0 msecs
    calling init_v2_quota_format+0x0/0x17
    initcall init_v2_quota_format+0x0/0x17 returned 0 after 0 msecs
    calling dnotify_init+0x0/0x2f
    initcall dnotify_init+0x0/0x2f returned 0 after 0 msecs
    calling vmcore_init+0x0/0x860
    initcall vmcore_init+0x0/0x860 returned 0 after 0 msecs
    calling init_devpts_fs+0x0/0x44
    initcall init_devpts_fs+0x0/0x44 returned 0 after 0 msecs
    calling init_ramfs_fs+0x0/0x17
    initcall init_ramfs_fs+0x0/0x17 returned 0 after 0 msecs
    calling init_hugetlbfs_fs+0x0/0x9d
    initcall init_hugetlbfs_fs+0x0/0x9d returned 0 after 0 msecs
    calling init_iso9660_fs+0x0/0x76
    initcall init_iso9660_fs+0x0/0x76 returned 0 after 0 msecs
    calling init_nls_cp437+0x0/0x17
    initcall init_nls_cp437+0x0/0x17 returned 0 after 0 msecs
    calling init_nls_ascii+0x0/0x17
    initcall init_nls_ascii+0x0/0x17 returned 0 after 0 msecs
    calling ipc_init+0x0/0x28
    msgmni has been set to 5936
    initcall ipc_init+0x0/0x28 returned 0 after 0 msecs
    calling ipc_sysctl_init+0x0/0x19
    initcall ipc_sysctl_init+0x0/0x19 returned 0 after 0 msecs
    calling init_mqueue_fs+0x0/0xdb
    initcall init_mqueue_fs+0x0/0xdb returned 0 after 0 msecs
    calling key_proc_init+0x0/0x5e
    initcall key_proc_init+0x0/0x5e returned 0 after 0 msecs
    calling selinux_nf_ip_init+0x0/0x7f
    SELinux: Registering netfilter hooks
    initcall selinux_nf_ip_init+0x0/0x7f returned 0 after 0 msecs
    calling init_sel_fs+0x0/0x6d
    initcall init_sel_fs+0x0/0x6d returned 0 after 1 msecs
    calling selnl_init+0x0/0x52
    initcall selnl_init+0x0/0x52 returned 0 after 0 msecs
    calling sel_netif_init+0x0/0x6b
    initcall sel_netif_init+0x0/0x6b returned 0 after 0 msecs
    calling sel_netnode_init+0x0/0x78
    initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs
    calling sel_netport_init+0x0/0x78
    initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs
    calling aurule_init+0x0/0x3c
    initcall aurule_init+0x0/0x3c returned 0 after 0 msecs
    calling crypto_algapi_init+0x0/0x12
    initcall crypto_algapi_init+0x0/0x12 returned 0 after 0 msecs
    calling cryptomgr_init+0x0/0x17
    initcall cryptomgr_init+0x0/0x17 returned 0 after 0 msecs
    calling hmac_module_init+0x0/0x17
    initcall hmac_module_init+0x0/0x17 returned 0 after 0 msecs
    calling md5_mod_init+0x0/0x17
    initcall md5_mod_init+0x0/0x17 returned 0 after 0 msecs
    calling sha1_generic_mod_init+0x0/0x17
    initcall sha1_generic_mod_init+0x0/0x17 returned 0 after 0 msecs
    calling bsg_init+0x0/0x128
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    initcall bsg_init+0x0/0x128 returned 0 after 0 msecs
    calling noop_init+0x0/0x19
    io scheduler noop registered
    initcall noop_init+0x0/0x19 returned 0 after 0 msecs
    calling as_init+0x0/0x19
    io scheduler anticipatory registered
    initcall as_init+0x0/0x19 returned 0 after 0 msecs
    calling deadline_init+0x0/0x19
    io scheduler deadline registered
    initcall deadline_init+0x0/0x19 returned 0 after 0 msecs
    calling cfq_init+0x0/0x99
    io scheduler cfq registered (default)
    initcall cfq_init+0x0/0x99 returned 0 after 0 msecs
    calling debug_objects_init_debugfs+0x0/0x64
    initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 msecs
    calling percpu_counter_startup+0x0/0x14
    initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
    calling pci_init+0x0/0x3a
    pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
    pci 0000:00:1d.0: Performing full reset
    pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.1: Performing full reset
    pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.2: Performing full reset
    pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
    pci 0000:00:1d.3: Performing full reset
    pci 0000:01:00.0: Boot video device
    initcall pci_init+0x0/0x3a returned 0 after 1 msecs
    calling pci_proc_init+0x0/0x70
    initcall pci_proc_init+0x0/0x70 returned 0 after 0 msecs
    calling pcie_portdrv_init+0x0/0x52
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    pcieport-driver 0000:00:01.0: found MSI capability
    pci_express 0000:00:01.0cie00: allocate port service
    pci_express 0000:00:01.0cie03: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    pcieport-driver 0000:00:1c.0: found MSI capability
    pci_express 0000:00:1c.0cie00: allocate port service
    pci_express 0000:00:1c.0cie02: allocate port service
    pci_express 0000:00:1c.0cie03: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    pcieport-driver 0000:00:1c.1: found MSI capability
    pci_express 0000:00:1c.1cie00: allocate port service
    pci_express 0000:00:1c.1cie02: allocate port service
    pci_express 0000:00:1c.1cie03: allocate port service
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    pcieport-driver 0000:00:1c.2: found MSI capability
    pci_express 0000:00:1c.2cie00: allocate port service
    pci_express 0000:00:1c.2cie02: allocate port service
    pci_express 0000:00:1c.2cie03: allocate port service
    initcall pcie_portdrv_init+0x0/0x52 returned 0 after 7 msecs
    calling aer_service_init+0x0/0x25
    initcall aer_service_init+0x0/0x25 returned 0 after 0 msecs
    calling pci_hotplug_init+0x0/0x22
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    initcall pci_hotplug_init+0x0/0x22 returned 0 after 0 msecs
    calling fb_console_init+0x0/0x12b
    initcall fb_console_init+0x0/0x12b returned 0 after 0 msecs
    calling vesafb_init+0x0/0x23f
    initcall vesafb_init+0x0/0x23f returned 0 after 0 msecs
    calling efifb_init+0x0/0x1f2
    initcall efifb_init+0x0/0x1f2 returned -19 after 0 msecs
    calling acpi_reserve_resources+0x0/0xf0
    initcall acpi_reserve_resources+0x0/0xf0 returned 0 after 0 msecs
    calling acpi_button_init+0x0/0x63
    input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID0]
    input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    ACPI: Power Button (CM) [PWRB]
    input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    ACPI: Sleep Button (CM) [SLPB]
    initcall acpi_button_init+0x0/0x63 returned 0 after 4 msecs
    calling acpi_fan_init+0x0/0x63
    initcall acpi_fan_init+0x0/0x63 returned 0 after 0 msecs
    calling irqrouter_init_sysfs+0x0/0x3d
    initcall irqrouter_init_sysfs+0x0/0x3d returned 0 after 0 msecs
    calling acpi_processor_init+0x0/0x10f
    ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
    ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
    ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    initcall acpi_processor_init+0x0/0x10f returned 0 after 22 msecs
    calling acpi_container_init+0x0/0x47
    initcall acpi_container_init+0x0/0x47 returned 0 after 17 msecs
    calling acpi_thermal_init+0x0/0x88
    initcall acpi_thermal_init+0x0/0x88 returned 0 after 0 msecs
    calling rand_initialize+0x0/0x31
    initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs
    calling tty_init+0x0/0x1ca
    initcall tty_init+0x0/0x1ca returned 0 after 29 msecs
    calling pty_init+0x0/0x278
    initcall pty_init+0x0/0x278 returned 0 after 0 msecs
    calling hpet_init+0x0/0x6f
    hpet_resources: 0xfed00000 is busy
    initcall hpet_init+0x0/0x6f returned 0 after 1 msecs
    calling nvram_init+0x0/0x8f
    Non-volatile memory driver v1.2
    initcall nvram_init+0x0/0x8f returned 0 after 0 msecs
    calling agp_init+0x0/0x2b
    Linux agpgart interface v0.103
    initcall agp_init+0x0/0x2b returned 0 after 0 msecs
    calling agp_intel_init+0x0/0x2e
    initcall agp_intel_init+0x0/0x2e returned 0 after 0 msecs
    calling agp_sis_init+0x0/0x2e
    initcall agp_sis_init+0x0/0x2e returned 0 after 0 msecs
    calling agp_via_init+0x0/0x2e
    initcall agp_via_init+0x0/0x2e returned 0 after 0 msecs
    calling cn_proc_init+0x0/0x42
    initcall cn_proc_init+0x0/0x42 returned 0 after 0 msecs
    calling serial8250_init+0x0/0x148
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    initcall serial8250_init+0x0/0x148 returned 0 after 2 msecs
    calling serial8250_pnp_init+0x0/0x17
    initcall serial8250_pnp_init+0x0/0x17 returned 0 after 0 msecs
    calling serial8250_pci_init+0x0/0x20
    initcall serial8250_pci_init+0x0/0x20 returned 0 after 0 msecs
    calling init_kgdboc+0x0/0x1b
    initcall init_kgdboc+0x0/0x1b returned 0 after 0 msecs
    calling topology_sysfs_init+0x0/0x5e
    initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 msecs
    calling brd_init+0x0/0x172
    brd: module loaded
    initcall brd_init+0x0/0x172 returned 0 after 11 msecs
    calling init_kgdbts+0x0/0x1b
    initcall init_kgdbts+0x0/0x1b returned 0 after 0 msecs
    calling net_olddevs_init+0x0/0xa3
    initcall net_olddevs_init+0x0/0xa3 returned 0 after 0 msecs
    calling mac_hid_init+0x0/0xd7
    input: Macintosh mouse button emulation as /devices/virtual/input/input4
    initcall mac_hid_init+0x0/0xd7 returned 0 after 0 msecs
    calling init_sd+0x0/0xfd
    Driver 'sd' needs updating - please use bus_type methods
    initcall init_sd+0x0/0xfd returned 0 after 0 msecs
    calling init_sg+0x0/0x145
    initcall init_sg+0x0/0x145 returned 0 after 0 msecs
    calling nonstatic_sysfs_init+0x0/0x17
    initcall nonstatic_sysfs_init+0x0/0x17 returned 0 after 0 msecs
    calling yenta_socket_init+0x0/0x20
    initcall yenta_socket_init+0x0/0x20 returned 0 after 0 msecs
    calling mon_init+0x0/0x11c
    initcall mon_init+0x0/0x11c returned 0 after 0 msecs
    calling i8042_init+0x0/0x371
    PNP: No PS/2 controller found. Probing ports directly.
    i8042.c: No controller found.
    initcall i8042_init+0x0/0x371 returned -19 after 2 msecs
    calling serport_init+0x0/0x39
    initcall serport_init+0x0/0x39 returned 0 after 0 msecs
    calling mousedev_init+0x0/0x67
    mice: PS/2 mouse device common for all mice
    initcall mousedev_init+0x0/0x67 returned 0 after 4 msecs
    calling evdev_init+0x0/0x17
    initcall evdev_init+0x0/0x17 returned 0 after 21 msecs
    calling atkbd_init+0x0/0x2c
    initcall atkbd_init+0x0/0x2c returned 0 after 0 msecs
    calling psmouse_init+0x0/0x78
    initcall psmouse_init+0x0/0x78 returned 0 after 0 msecs
    calling cmos_init+0x0/0x35
    rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    initcall cmos_init+0x0/0x35 returned 0 after 1 msecs
    calling init_ladder+0x0/0x17
    cpuidle: using governor ladder
    initcall init_ladder+0x0/0x17 returned 0 after 2 msecs
    calling init_menu+0x0/0x17
    cpuidle: using governor menu
    initcall init_menu+0x0/0x17 returned 0 after 4 msecs
    calling efivars_init+0x0/0x1f5
    initcall efivars_init+0x0/0x1f5 returned -19 after 0 msecs
    calling hid_init+0x0/0x10
    initcall hid_init+0x0/0x10 returned 0 after 0 msecs
    calling hid_init+0x0/0x67
    Marking TSC unstable due to TSC halts in idle
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    initcall hid_init+0x0/0x67 returned 0 after 1 msecs
    calling sysctl_core_init+0x0/0x17
    initcall sysctl_core_init+0x0/0x17 returned 0 after 0 msecs
    calling flow_cache_init+0x0/0x1ca
    initcall flow_cache_init+0x0/0x1ca returned 0 after 0 msecs
    calling llc_init+0x0/0x25
    initcall llc_init+0x0/0x25 returned 0 after 0 msecs
    calling snap_init+0x0/0x36
    initcall snap_init+0x0/0x36 returned 0 after 0 msecs
    calling rif_init+0x0/0x9a
    initcall rif_init+0x0/0x9a returned 0 after 0 msecs
    calling blackhole_module_init+0x0/0x17
    initcall blackhole_module_init+0x0/0x17 returned 0 after 0 msecs
    calling sysctl_ipv4_init+0x0/0x53
    initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 1 msecs
    calling init_syncookies+0x0/0x1e
    initcall init_syncookies+0x0/0x1e returned 0 after 0 msecs
    calling ipv4_netfilter_init+0x0/0x17
    initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs
    calling cubictcp_register+0x0/0x6a
    TCP cubic registered
    initcall cubictcp_register+0x0/0x6a returned 0 after 0 msecs
    calling xfrm_user_init+0x0/0x5e
    Initializing XFRM netlink socket
    initcall xfrm_user_init+0x0/0x5e returned 0 after 0 msecs
    calling packet_init+0x0/0x4c
    NET: Registered protocol family 17
    initcall packet_init+0x0/0x4c returned 0 after 0 msecs
    calling hpet_insert_resource+0x0/0x28
    initcall hpet_insert_resource+0x0/0x28 returned 0 after 0 msecs
    calling update_mp_table+0x0/0x61b
    initcall update_mp_table+0x0/0x61b returned 0 after 0 msecs
    calling lapic_insert_resource+0x0/0x45
    initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 msecs
    calling init_lapic_nmi_sysfs+0x0/0x3d
    initcall init_lapic_nmi_sysfs+0x0/0x3d returned 0 after 0 msecs
    calling ioapic_insert_resources+0x0/0x54
    initcall ioapic_insert_resources+0x0/0x54 returned 0 after 0 msecs
    calling check_early_ioremap_leak+0x0/0x49
    initcall check_early_ioremap_leak+0x0/0x49 returned 0 after 0 msecs
    calling sched_init_debug+0x0/0x24
    initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs
    calling init_oops_id+0x0/0x28
    initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs
    calling disable_boot_consoles+0x0/0x3f
    initcall disable_boot_consoles+0x0/0x3f returned 0 after 0 msecs
    calling pm_qos_power_init+0x0/0xcf
    initcall pm_qos_power_init+0x0/0xcf returned 0 after 0 msecs
    calling software_resume+0x0/0x1ba
    initcall software_resume+0x0/0x1ba returned -2 after 0 msecs
    initcall software_resume+0x0/0x1ba returned with error code -2
    calling debugfs_kprobe_init+0x0/0x8e
    initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 0 msecs
    calling taskstats_init+0x0/0x9a
    registered taskstats version 1
    initcall taskstats_init+0x0/0x9a returned 0 after 0 msecs
    calling fail_page_alloc_debugfs+0x0/0xe9
    initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 msecs
    calling fail_make_request_debugfs+0x0/0x1e
    initcall fail_make_request_debugfs+0x0/0x1e returned 0 after 0 msecs
    calling random32_reseed+0x0/0x7e
    initcall random32_reseed+0x0/0x7e returned 0 after 0 msecs
    calling pci_sysfs_init+0x0/0x51
    initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 msecs
    calling acpi_wakeup_device_init+0x0/0xb6
    initcall acpi_wakeup_device_init+0x0/0xb6 returned 0 after 0 msecs
    calling acpi_sleep_proc_init+0x0/0x5a
    initcall acpi_sleep_proc_init+0x0/0x5a returned 0 after 0 msecs
    calling seqgen_init+0x0/0x14
    initcall seqgen_init+0x0/0x14 returned 0 after 0 msecs
    calling late_resume_init+0x0/0x112
    Magic number: 0:812:108
    initcall late_resume_init+0x0/0x112 returned 0 after 0 msecs
    calling scsi_complete_async_scans+0x0/0xf4
    initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 0 msecs
    calling memmap_init+0x0/0x9d
    initcall memmap_init+0x0/0x9d returned 0 after 0 msecs
    calling pci_mmcfg_late_insert_resources+0x0/0x48
    initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned 0 after 0 msecs
    calling tcp_congestion_default+0x0/0x17
    initcall tcp_congestion_default+0x0/0x17 returned 0 after 0 msecs
    debug: unmapping init memory ffffffff814eb000..ffffffff8166d000
    Write protecting the kernel read-only data: 1368k
    ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file 'devices'
    drivers/usb/core/inode.c: creating file '001'
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
    ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: default language 0x0409
    usb usb1: uevent
    usb usb1: usb_probe_device
    usb usb1: configuration #1 chosen from 1 choice
    usb usb1: adding 1-0:1.0 (config #1, interface 0)
    usb 1-0:1.0: uevent
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: no power switching (usb 1.0)
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: power on to power good time: 20ms
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: trying to enable port power on non-switchable hub
    Clocksource tsc unstable (delta = -305979950 ns)
    hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
    drivers/usb/core/inode.c: creating file '001'
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
    modprobe used greatest stack depth: 3792 bytes left
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd: block sizes: ed 80 td 96
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '002'
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: detected 2 ports
    uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.0: Performing full reset
    uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    usb usb2: default language 0x0409
    usb usb2: uevent
    usb usb2: usb_probe_device
    usb usb2: configuration #1 chosen from 1 choice
    usb usb2: adding 2-0:1.0 (config #1, interface 0)
    usb 2-0:1.0: uevent
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: no power switching (usb 1.0)
    hub 2-0:1.0: individual port over-current protection
    hub 2-0:1.0: power on to power good time: 2ms
    hub 2-0:1.0: local power source is good
    hub 2-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
    drivers/usb/core/inode.c: creating file '001'
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '003'
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: detected 2 ports
    uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.1: Performing full reset
    uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    usb usb3: default language 0x0409
    usb usb3: uevent
    usb usb3: usb_probe_device
    usb usb3: configuration #1 chosen from 1 choice
    usb usb3: adding 3-0:1.0 (config #1, interface 0)
    usb 3-0:1.0: uevent
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: no power switching (usb 1.0)
    hub 3-0:1.0: individual port over-current protection
    hub 3-0:1.0: power on to power good time: 2ms
    hub 3-0:1.0: local power source is good
    hub 3-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 2 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
    drivers/usb/core/inode.c: creating file '001'
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '004'
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: detected 2 ports
    uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.2: Performing full reset
    uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    usb usb4: default language 0x0409
    usb usb4: uevent
    usb usb4: usb_probe_device
    usb usb4: configuration #1 chosen from 1 choice
    usb usb4: adding 4-0:1.0 (config #1, interface 0)
    usb 4-0:1.0: uevent
    hub 4-0:1.0: usb_probe_interface
    hub 4-0:1.0: usb_probe_interface - got id
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    hub 4-0:1.0: standalone hub
    hub 4-0:1.0: no power switching (usb 1.0)
    hub 4-0:1.0: individual port over-current protection
    hub 4-0:1.0: power on to power good time: 2ms
    hub 4-0:1.0: local power source is good
    hub 4-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
    drivers/usb/core/inode.c: creating file '001'
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '005'
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: detected 2 ports
    uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.3: Performing full reset
    uhci_hcd 0000:00:1d.3: supports USB remote wakeup
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    usb usb5: default language 0x0409
    usb usb5: uevent
    usb usb5: usb_probe_device
    usb usb5: configuration #1 chosen from 1 choice
    usb usb5: adding 5-0:1.0 (config #1, interface 0)
    usb 5-0:1.0: uevent
    hub 5-0:1.0: usb_probe_interface
    hub 5-0:1.0: usb_probe_interface - got id
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    hub 5-0:1.0: standalone hub
    hub 5-0:1.0: no power switching (usb 1.0)
    hub 5-0:1.0: individual port over-current protection
    hub 5-0:1.0: power on to power good time: 2ms
    hub 5-0:1.0: local power source is good
    hub 5-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: port 4 high speed
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    usb 1-4: new high speed USB device using ehci_hcd and address 3
    drivers/usb/core/inode.c: creating file '001'
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.3
    modprobe used greatest stack depth: 3744 bytes left
    ata_piix 0000:00:1f.1: version 2.12
    ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    ehci_hcd 0000:00:1d.7: port 4 high speed
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    usb 1-4: uevent
    usb 1-4: usb_probe_device
    usb 1-4: configuration #1 chosen from 1 choice
    usb 1-4: adding 1-4:1.0 (config #1, interface 0)
    usb 1-4:1.0: uevent
    drivers/usb/core/inode.c: creating file '003'
    usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
    usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
    ata1.00: ATAPI: MAT****ADVD-R UJ-85J, FAV1, max UDMA/66
    ata1.00: configured for UDMA/66
    hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
    ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 6 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
    isa bounce pool size: 16 pages
    scsi 0:0:0:0: CD-ROM MAT****A DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5
    scsi 0:0:0:0: Attached scsi generic sg0 type 5
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
    hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
    ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 7 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
    hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
    hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100
    ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4)
    ata3.01: configured for UDMA/100
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    usb 2-2: ep0 maxpacket = 8
    usb 2-2: USB quirks for this device: 2
    scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
    sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    sd 2:0:1:0: [sda] Write Protect is off
    sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    sd 2:0:1:0: [sda] Write Protect is off
    sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<7>usb 2-2: skipped 1 descriptor after interface
    usb 2-2: skipped 1 descriptor after interface
    usb 2-2: skipped 1 descriptor after interface
    usb 2-2: default language 0x0409
    usb 2-2: uevent
    usb 2-2: usb_probe_device
    usb 2-2: configuration #1 chosen from 1 choice
    usb 2-2: adding 2-2:1.0 (config #1, interface 0)
    usb 2-2:1.0: uevent
    usbhid 2-2:1.0: usb_probe_interface
    usbhid 2-2:1.0: usb_probe_interface - got id
    input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us
    input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
    usb 2-2: adding 2-2:1.1 (config #1, interface 1)
    usb 2-2:1.1: uevent
    usbhid 2-2:1.1: usb_probe_interface
    usbhid 2-2:1.1: usb_probe_interface - got id
    usb 2-2: adding 2-2:1.2 (config #1, interface 2)
    usb 2-2:1.2: uevent
    usbhid 2-2:1.2: usb_probe_interface
    usbhid 2-2:1.2: usb_probe_interface - got id
    input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us
    sda1 sda2 sda3 sda4 sda5
    input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
    sd 2:0:1:0: [sda] Attached SCSI disk
    sd 2:0:1:0: Attached scsi generic sg1 type 0
    modprobe used greatest stack depth: 2304 bytes left
    drivers/usb/core/inode.c: creating file '002'
    usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
    usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: Apple Internal Keyboard / Trackpad
    usb 2-2: Manufacturer: Apple Computer
    hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
    hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
    hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
    hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
    hub 4-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    usb 4-2: new full speed USB device using uhci_hcd and address 2
    usb 4-2: ep0 maxpacket = 8
    usb 4-2: skipped 1 descriptor after interface
    usb 4-2: default language 0x0409
    usb 4-2: uevent
    usb 4-2: usb_probe_device
    usb 4-2: configuration #1 chosen from 1 choice
    usb 4-2: adding 4-2:1.0 (config #1, interface 0)
    usb 4-2:1.0: uevent
    usbhid 4-2:1.0: usb_probe_interface
    usbhid 4-2:1.0: usb_probe_interface - got id
    drivers/usb/core/file.c: looking for a minor, starting at 96
    hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
    drivers/usb/core/inode.c: creating file '002'
    usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
    usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 4-2: Product: IR Receiver
    usb 4-2: Manufacturer: Apple Computer, Inc.
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
    uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
    hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
    hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
    usb 5-1: new full speed USB device using uhci_hcd and address 2
    usb 5-1: skipped 1 descriptor after interface
    usb 5-1: skipped 1 descriptor after interface
    usb 5-1: uevent
    usb 5-1: usb_probe_device
    usb 5-1: configuration #1 chosen from 1 choice
    usb 5-1: adding 5-1:1.0 (config #1, interface 0)
    usb 5-1:1.0: uevent
    usbhid 5-1:1.0: usb_probe_interface
    usbhid 5-1:1.0: usb_probe_interface - got id
    input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
    input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
    usb 5-1: adding 5-1:1.1 (config #1, interface 1)
    usb 5-1:1.1: uevent
    usbhid 5-1:1.1: usb_probe_interface
    usbhid 5-1:1.1: usb_probe_interface - got id
    input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8
    input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
    drivers/usb/core/inode.c: creating file '002'
    usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
    usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
    usb usb3: suspend_rh (auto-stop)
    hub 3-0:1.0: hub_suspend
    usb usb3: bus auto-suspend
    usb usb3: suspend_rh
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    type=1404 audit(1216436785.373:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
    SELinux: 8192 avtab hash slots, 171021 rules.
    SELinux: 8192 avtab hash slots, 171021 rules.
    SELinux: 8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats
    SELinux: 72 classes, 171021 rules
    SELinux: permission open in class dir not defined in policy
    SELinux: permission open in class file not defined in policy
    SELinux: permission open in class chr_file not defined in policy
    SELinux: permission open in class blk_file not defined in policy
    SELinux: permission open in class fifo_file not defined in policy
    SELinux: the above unknown classes and permissions will be allowed
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev sda5, type ext3), uses xattr
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    type=1403 audit(1216436786.249:3): policy loaded auid=4294967295 ses=4294967295
    usb usb2: uevent
    usb 2-0:1.0: uevent
    usb 2-2: uevent
    usb 2-2:1.0: uevent
    usb 2-2:1.1: uevent
    usb 2-2:1.2: uevent
    usb usb3: uevent
    usb 3-0:1.0: uevent
    usb usb4: uevent
    usb 4-0:1.0: uevent
    usb 4-2: uevent
    usb 4-2:1.0: uevent
    usb usb5: uevent
    usb 5-0:1.0: uevent
    usb 5-1: uevent
    usb 5-1:1.0: uevent
    usb 5-1:1.1: uevent
    usb usb1: uevent
    usb 1-0:1.0: uevent
    usb 1-4: uevent
    usb 1-4:1.0: uevent
    appletouch 2-2:1.1: usb_probe_interface
    appletouch 2-2:1.1: usb_probe_interface - got id
    appletouch: Geyser mode initialized.
    input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9
    usbcore: registered new interface driver appletouch
    intel_rng: FWH not detected
    iTCO_vendor_support: vendor-support=0
    ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    ath5k_pci 0000:03:00.0: registered as 'phy0'
    ath5k phy0: Device not yet supported.
    ath5k_pci 0000:03:00.0: PCI INT A disabled
    ACPI: AC Adapter [ADP1] (on-line)
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    ACPI: Battery Slot [BAT0] (battery present)
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    input: PC Speaker as /devices/platform/pcspkr/input/input10
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
    ACPI: Device needs an ACPI driver
    isight_firmware 1-4:1.0: usb_probe_interface
    isight_firmware 1-4:1.0: usb_probe_interface - got id
    firmware: requesting isight.fw
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input11
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    sky2 0000:02:00.0: v1.21 addr 0xd8200000 irq 16 Yukon-EC (0xb6) rev 2
    sky2 eth0: addr 00:17:f2:d1:e0:6f
    Unable to load isight firmware
    usbcore: registered new interface driver isight_firmware
    firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
    firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800
    ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
    ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    [drm] Initialized radeon 1.29.0 20080528 on minor 0
    [drm] Setting GART location based on new memory map
    [drm] Loading R500 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 1 usecs
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    appletouch: incomplete data package (first byte: 2, length: 4).
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
    device-mapper: multipath: version 1.0.5 loaded
    EXT3 FS on sda5, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda3, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    IA-32 Microcode Update Driver: v1.14a
    firmware: requesting intel-ucode/06-0f-06
    firmware: requesting intel-ucode/06-0f-06
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
    fuse init (API version 7.9)
    SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
    usb usb3: usb auto-resume
    usb usb3: wakeup_rh
    hub 3-0:1.0: hub_resume
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    usb usb3: suspend_rh (auto-stop)
    uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us
    uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us
    hub 3-0:1.0: hub_suspend
    usb usb3: bus auto-suspend
    usb usb3: suspend_rh
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.9
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.8
    Bluetooth: BNEP (Ethernet Emulation) ver 1.2
    Bluetooth: BNEP filters: protocol multicast
    Bridge firewalling registered
    pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    [drm] Num pipes: 1
    [drm] Setting GART location based on new memory map
    [drm] Loading R500 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 1 usecs
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    ath0: no IPv6 routers present
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level NODE
    groups: 0-1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level NODE
    groups: 0-1
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us






    On Fri, Jul 18, 2008 at 06:22:08PM -0700, Yinghai Lu wrote:
    > On Fri, Jul 18, 2008 at 5:58 PM, Jack Howarth wrote:
    > > YH,
    > > The patch you posted did not apply cleanly to tonight's or last night's linus kernel git.
    > > I had to correct it by hand and this is what I applied...

    >
    > it should apply cleanly to linus tree too.
    >
    > please check the patch i sent out before and addon fix patch
    >
    > YH


    > [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved
    >
    > for MacBookPro2
    >
    > change the mconf bus range from [0,0xff] to to [0, 0x3f]
    > to match range [0xf0000000, 0xf4000000) in e820 tables.
    >
    > Signed-off-by: Yinghai Lu
    >
    > ---
    > arch/x86/pci/mmconfig-shared.c | 64 ++++++++++++++++++++++++++++++-----------
    > 1 file changed, 47 insertions(+), 17 deletions(-)
    >
    > Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
    > ================================================== =================
    > --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
    > +++ linux-2.6/arch/x86/pci/mmconfig-shared.c
    > @@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re
    > return AE_OK;
    > }
    >
    > -static int __init is_acpi_reserved(unsigned long start, unsigned long end)
    > +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
    > {
    > struct resource mcfg_res;
    >
    > @@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig
    > return mcfg_res.flags;
    > }
    >
    > +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
    > +
    > +static int __init is_mmconf_reserved(check_reserved_t is_reserved,
    > + u64 addr, u64 size, int i,
    > + typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
    > +{
    > + u64 old_size = size;
    > + int valid = 0;
    > +
    > + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
    > + size >>= 1;
    > + if (size < (16UL<<20))
    > + break;
    > + }
    > +
    > + if (size >= (16UL<<20) || size == old_size) {
    > + printk(KERN_NOTICE
    > + "PCI: MCFG area at %Lx reserved in %s\n",
    > + addr, with_e820?"E820":"ACPI motherboard resources");
    > + valid = 1;
    > +
    > + if (old_size != size) {
    > + /* update end_bus_number */
    > + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
    > + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
    > + "segment %hu buses %u - %u\n",
    > + i, (unsigned long)cfg->address, cfg->pci_segment,
    > + (unsigned int)cfg->start_bus_number,
    > + (unsigned int)cfg->end_bus_number);
    > + }
    > + }
    > +
    > + return valid;
    > +}
    > +
    > static void __init pci_mmcfg_reject_broken(int early)
    > {
    > typeof(pci_mmcfg_config[0]) *cfg;
    > @@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok
    >
    > for (i = 0; i < pci_mmcfg_config_num; i++) {
    > int valid = 0;
    > - u32 size = (cfg->end_bus_number + 1) << 20;
    > + u64 addr, size;
    > +
    > cfg = &pci_mmcfg_config[i];
    > + addr = cfg->start_bus_number;
    > + addr <<= 20;
    > + size = cfg->end_bus_number + 1 - cfg->start_bus_number;
    > + size <<= 20;
    > printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
    > "segment %hu buses %u - %u\n",
    > i, (unsigned long)cfg->address, cfg->pci_segment,
    > (unsigned int)cfg->start_bus_number,
    > (unsigned int)cfg->end_bus_number);
    >
    > - if (!early &&
    > - is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
    > - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
    > - "in ACPI motherboard resources\n",
    > - cfg->address);
    > - valid = 1;
    > - }
    > + if (!early)
    > + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
    >
    > if (valid)
    > continue;
    > @@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok
    > printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
    > " reserved in ACPI motherboard resources\n",
    > cfg->address);
    > +
    > /* Don't try to do this check unless configuration
    > type 1 is available. how about type 2 ?*/
    > - if (raw_pci_ops && e820_all_mapped(cfg->address,
    > - cfg->address + size - 1,
    > - E820_RESERVED)) {
    > - printk(KERN_NOTICE
    > - "PCI: MCFG area at %Lx reserved in E820\n",
    > - cfg->address);
    > - valid = 1;
    > - }
    > + if (raw_pci_ops)
    > + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
    >
    > if (!valid)
    > goto reject;


    > [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved
    >
    > Signed-off-by: Yinghai Lu
    >
    > diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
    > index 9297882..429c701 100644
    > --- a/arch/x86/pci/mmconfig-shared.c
    > +++ b/arch/x86/pci/mmconfig-shared.c
    > @@ -364,6 +364,7 @@ static void __init pci_mmcfg_reject_broken(int early)
    > cfg = &pci_mmcfg_config[i];
    > addr = cfg->start_bus_number;
    > addr <<= 20;
    > + addr += cfg->address;
    > size = cfg->end_bus_number + 1 - cfg->start_bus_number;
    > size <<= 20;
    > printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "


    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  18. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Fri, Jul 18, 2008 at 8:28 PM, Jack Howarth wrote:
    > YH,
    > The mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch both applied
    > cleanly to the current linus kernel git and solve my problems with MMCONFIG not starting.
    > I am attaching a dmesg log below of a boot with 'debug apic=verbose initcall_debug pci=routeirq'.
    > If you look at the section immediately before the line...
    >
    > pci 0000:00:1e.0: transparent bridge
    >
    > you will see that it is radically different from what I posted for the freeze under PCIEASPM
    > with MMCONFIG (using your original mmconfig patch)...
    >
    > PCI: 0000:00:1f.1 reg 10 io port: [ 40d8, 40df]
    > PCI: 0000:00:1f.1 reg 14 io port: [ 40ec, 40ef]
    > PCI: 0000:00:1f.1 reg 18 io port: [ 40d0, 40d7]
    > PCI: 0000:00:1f.1 reg 1c io port: [ 40e8, 40eb]
    > PCI: 0000:00:1f.1 reg 20 io port: [ 40b0, 40bf]
    > pci 0000:00.1f.1: calling pci_fixup_transparent_bridge+0x0/0x2a
    > PCI: Found 0000:00:1f.2 [8086/27c4] 000101 00
    > PCI: 0000:00:1f.2 reg 10 io port: [ 40c8, 40cf]
    > PCI: 0000:00:1f.2 reg 14 io port: [ 40e4, 40e7]
    > PCI: 0000:00:1f.2 reg 18 io port: [ 40c0, 40c7]
    > PCI: 0000:00:1f.2 reg 1c io port: [ 40e0, 40e3]
    > PCI: 0000:00:1f.2 reg 20 io port: [ 40a0, 40af]
    > PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
    > pci: 0000:00:1f.2 calling pci_fixup_transparent_bridge+0x0/0x2a
    > PCI: Found 0000:00:1f.3 [8086/27da] 000c05 00
    > PCI: 0000:00:1f.3 reg 20 io port: [ efa0, efbf]
    > PCI: 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
    > PCI: Fixups for bus 0000:00
    > PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
    > PCI: Scanning bus 0000:01
    > PCI: Found 0000:01:00.0 [1002/71c5] 000300 00
    > PCI: 0000:00:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
    > PCI: 0000:00:01:00.0 reg 14 io port: [ 3000, 30ff]
    > PCI: 0000:00:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]
    >
    > Perhaps one of the PCIEASPM experts can explain why there are so
    > many calls to pci_fixup_transparent_bridge and a scan behind the bridge.
    > Nothing like that appears in the dmesg from your latest patch without
    > PCIEASPM.
    > Jack
    >
    > Initializing cgroup subsys cpuset
    > Initializing cgroup subsys cpu
    > Linux version 2.6.27-0.156.rc0.git4.fc9.x86_64 (howarth@localhost.localdomain) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jul 18 22:02:40 EDT 2008
    > Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq
    > BIOS-provided physical RAM map:
    > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    > BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable)
    > BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS)
    > BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data)
    > BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
    > BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
    > BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
    > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    > KERNEL supported cpus:
    > Intel GenuineIntel
    > AMD AuthenticAMD
    > Centaur CentaurHauls
    > last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff
    > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    > init_memory_mapping
    > 0000000000 - 00bf000000 page 2M
    > 00bf000000 - 00bf0e9000 page 4k
    > kernel direct mapping tables up to bf0e9000 @ 8000-d000
    > last_map_addr: bf0e9000 end: bf0e9000
    > RAMDISK: 37d35000 - 37fef5d1
    > DMI 2.4 present.
    > ACPI: RSDP 000FE020, 0024 (r2 APPLE )
    > ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
    > ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
    > ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309)
    > ACPI: FACS BFEC0000, 0040
    > ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
    > ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
    > ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
    > ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
    > ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
    > ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
    > ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
    > ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
    > ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
    > ACPI: DMI detected: Apple
    > No NUMA configuration found
    > Faking a node at 0000000000000000-00000000bf0e9000
    > Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
    > Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used
    > Bootmem setup node 0 0000000000000000-00000000bf0e9000
    > NODE_DATA [000000000000b000 - 000000000001ffff]
    > bootmap [0000000000020000 - 0000000000037e1f] pages 18
    > (6 early reservations) ==> bootmem
    > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    > #2 [0000200000 - 0000e5fe68] TEXT DATA BSS ==> [0000200000 - 0000e5fe68]
    > #3 [0037d35000 - 0037fef5d1] RAMDISK ==> [0037d35000 - 0037fef5d1]
    > #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    > #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
    > Scan SMP from ffff880000000000 for 1024 bytes.
    > Scan SMP from ffff88000009fc00 for 1024 bytes.
    > Scan SMP from ffff8800000f0000 for 65536 bytes.
    > Scan SMP from ffff88000009fc00 for 1024 bytes.
    > [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0
    > Zone PFN ranges:
    > DMA 0x00000000 -> 0x00001000
    > DMA32 0x00001000 -> 0x00100000
    > Normal 0x00100000 -> 0x00100000
    > Movable zone start PFN for each node
    > early_node_map[2] active PFN ranges
    > 0: 0x00000000 -> 0x0000009f
    > 0: 0x00000100 -> 0x000bf0e9
    > On node 0 totalpages: 782472
    > DMA zone: 96 pages used for memmap
    > DMA zone: 3269 pages reserved
    > DMA zone: 634 pages, LIFO batch:0
    > DMA32 zone: 18246 pages used for memmap
    > DMA32 zone: 760227 pages, LIFO batch:31
    > Normal zone: 0 pages used for memmap
    > Movable zone: 0 pages used for memmap
    > ACPI: PM-Timer IO Port: 0x408
    > ACPI: Local APIC address 0xfee00000
    > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    > IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    > ACPI: IRQ0 used by override.
    > ACPI: IRQ2 used by override.
    > ACPI: IRQ9 used by override.
    > Setting APIC routing to flat
    > ACPI: HPET id: 0x8086a201 base: 0xfed00000
    > Using ACPI (MADT) for SMP configuration information
    > SMP: Allowing 2 CPUs, 0 hotplug CPUs
    > mapped APIC to ffffffffff5fc000 ( fee00000)
    > mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
    > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    > Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
    > PERCPU: Allocating 442304 bytes of per cpu data
    > NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
    > Built 1 zonelists in Node order, mobility grouping on. Total pages: 760861
    > Policy zone: DMA32
    > Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq
    > Initializing CPU#0
    > PID hash table entries: 4096 (order: 12, 32768 bytes)
    > Extended CMOS year: 2000
    > TSC calibrated against PM_TIMER
    > Detected 2327.490 MHz processor.
    > Console: colour VGA+ 80x25
    > console [tty0] enabled
    > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    > ... MAX_LOCKDEP_SUBCLASSES: 8
    > ... MAX_LOCK_DEPTH: 48
    > ... MAX_LOCKDEP_KEYS: 2048
    > ... CLASSHASH_SIZE: 1024
    > ... MAX_LOCKDEP_ENTRIES: 8192
    > ... MAX_LOCKDEP_CHAINS: 16384
    > ... CHAINHASH_SIZE: 8192
    > memory used by lock dependency info: 1840 kB
    > per task-struct memory footprint: 3456 bytes
    > Checking aperture...
    > No AGP bridge found
    > Calgary: detecting Calgary via BIOS EBDA area
    > Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    > Memory: 3039268k/3130276k available (3099k kernel code, 90620k reserved, 1746k data, 1544k init)
    > CPA: page pool initialized 48 of 48 pages preallocated
    > SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    > hpet clockevent registered
    > Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4654.98 BogoMIPS (lpj=2327490)
    > Security Framework initialized
    > SELinux: Initializing.
    > SELinux: Starting in permissive mode
    > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    > Mount-cache hash table entries: 256
    > Initializing cgroup subsys ns
    > Initializing cgroup subsys cpuacct
    > Initializing cgroup subsys devices
    > CPU: L1 I cache: 32K, L1 D cache: 32K
    > CPU: L2 cache: 4096K
    > CPU 0/0 -> Node 0
    > CPU: Physical Processor ID: 0
    > CPU: Processor Core ID: 0
    > CPU0: Thermal monitoring enabled (TM2)
    > using mwait in idle threads.
    > ACPI: Core revision 20080609
    > enabled ExtINT on CPU#0
    > ENABLING IO-APIC IRQs
    > init IO_APIC IRQs
    > IO-APIC (apicid-pin) 1-0 not connected.
    > IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
    > IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
    > IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
    > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    > CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
    > Using local APIC timer interrupts.
    > APIC timer calibration result 10390580
    > Detected 10.390 MHz APIC timer.
    > lockdep: fixing up alternatives.
    > Booting processor 1/1 ip 6000
    > Initializing CPU#1
    > masked ExtINT on CPU#1
    > Calibrating delay using timer specific routine.. <6>4654.79 BogoMIPS (lpj=2327398)
    > CPU: L1 I cache: 32K, L1 D cache: 32K
    > CPU: L2 cache: 4096K
    > CPU 1/1 -> Node 0
    > CPU: Physical Processor ID: 0
    > CPU: Processor Core ID: 1
    > CPU1: Thermal monitoring enabled (TM2)
    > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    > CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
    > checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    > Brought up 2 CPUs
    > Total of 2 processors activated (9309.77 BogoMIPS).
    > sizeof(vma)=176 bytes
    > sizeof(page)=96 bytes
    > sizeof(inode)=1088 bytes
    > sizeof(dentry)=256 bytes
    > sizeof(ext3inode)=1488 bytes
    > sizeof(buffer_head)=104 bytes
    > sizeof(skbuff)=232 bytes
    > sizeof(task_struct)=9528 bytes
    > CPU0 attaching sched-domain:
    > domain 0: span 0-1 level MC
    > groups: 0 1
    > domain 1: span 0-1 level NODE
    > groups: 0-1
    > CPU1 attaching sched-domain:
    > domain 0: span 0-1 level MC
    > groups: 1 0
    > domain 1: span 0-1 level NODE
    > groups: 0-1
    > khelper used greatest stack depth: 5648 bytes left
    > calling init_cpufreq_transition_notifier_list+0x0/0x20
    > initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs
    > calling net_ns_init+0x0/0x134
    > net_namespace: 1352 bytes
    > initcall net_ns_init+0x0/0x134 returned 0 after 0 msecs
    > calling cpufreq_tsc+0x0/0x16
    > initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
    > calling init_smp_flush+0x0/0x6b
    > initcall init_smp_flush+0x0/0x6b returned 0 after 0 msecs
    > calling print_banner+0x0/0x13
    > Booting paravirtualized kernel on bare hardware
    > initcall print_banner+0x0/0x13 returned 0 after 0 msecs
    > calling sysctl_init+0x0/0x37
    > initcall sysctl_init+0x0/0x37 returned 0 after 0 msecs
    > calling ksysfs_init+0x0/0xc0
    > initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs
    > calling init_jiffies_clocksource+0x0/0x17
    > initcall init_jiffies_clocksource+0x0/0x17 returned 0 after 0 msecs
    > calling pm_init+0x0/0x39
    > initcall pm_init+0x0/0x39 returned 0 after 0 msecs
    > calling pm_disk_init+0x0/0x1e
    > initcall pm_disk_init+0x0/0x1e returned 0 after 0 msecs
    > calling swsusp_header_init+0x0/0x31
    > initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs
    > calling ftrace_dynamic_init+0x0/0xd7
    > initcall ftrace_dynamic_init+0x0/0xd7 returned 0 after 0 msecs
    > calling filelock_init+0x0/0x33
    > initcall filelock_init+0x0/0x33 returned 0 after 0 msecs
    > calling init_misc_binfmt+0x0/0x44
    > initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 msecs
    > calling init_script_binfmt+0x0/0x17
    > initcall init_script_binfmt+0x0/0x17 returned 0 after 0 msecs
    > calling init_elf_binfmt+0x0/0x17
    > initcall init_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
    > calling init_compat_elf_binfmt+0x0/0x17
    > initcall init_compat_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
    > calling debugfs_init+0x0/0x56
    > initcall debugfs_init+0x0/0x56 returned 0 after 0 msecs
    > calling securityfs_init+0x0/0x56
    > initcall securityfs_init+0x0/0x56 returned 0 after 0 msecs
    > calling random32_init+0x0/0x5f
    > initcall random32_init+0x0/0x5f returned 0 after 0 msecs
    > calling early_resume_init+0x0/0x1d4
    > Time: 3:06:17 Date: 07/19/08
    > initcall early_resume_init+0x0/0x1d4 returned 0 after 0 msecs
    > calling cpufreq_core_init+0x0/0x8f
    > initcall cpufreq_core_init+0x0/0x8f returned 0 after 0 msecs
    > calling cpuidle_init+0x0/0x45
    > initcall cpuidle_init+0x0/0x45 returned 0 after 0 msecs
    > calling sock_init+0x0/0x63
    > initcall sock_init+0x0/0x63 returned 0 after 0 msecs
    > calling netpoll_init+0x0/0x46
    > initcall netpoll_init+0x0/0x46 returned 0 after 0 msecs
    > calling netlink_proto_init+0x0/0x150
    > NET: Registered protocol family 16
    > initcall netlink_proto_init+0x0/0x150 returned 0 after 0 msecs
    > calling bdi_class_init+0x0/0x42
    > initcall bdi_class_init+0x0/0x42 returned 0 after 0 msecs
    > calling kobject_uevent_init+0x0/0x47
    > initcall kobject_uevent_init+0x0/0x47 returned 0 after 0 msecs
    > calling pcibus_class_init+0x0/0x17
    > initcall pcibus_class_init+0x0/0x17 returned 0 after 0 msecs
    > calling pci_driver_init+0x0/0x17
    > initcall pci_driver_init+0x0/0x17 returned 0 after 0 msecs
    > calling backlight_class_init+0x0/0x4e
    > initcall backlight_class_init+0x0/0x4e returned 0 after 0 msecs
    > calling dock_init+0x0/0x5f
    > No dock devices found.
    > initcall dock_init+0x0/0x5f returned 0 after 0 msecs
    > calling tty_class_init+0x0/0x2f
    > initcall tty_class_init+0x0/0x2f returned 0 after 0 msecs
    > calling vtconsole_class_init+0x0/0xbf
    > khelper used greatest stack depth: 4904 bytes left
    > initcall vtconsole_class_init+0x0/0xbf returned 0 after 0 msecs
    > calling register_node_type+0x0/0x83
    > initcall register_node_type+0x0/0x83 returned 0 after 0 msecs
    > calling enable_pci_io_ecs+0x0/0x33
    > initcall enable_pci_io_ecs+0x0/0x33 returned 0 after 0 msecs
    > calling early_fill_mp_bus_info+0x0/0x80c
    > initcall early_fill_mp_bus_info+0x0/0x80c returned 0 after 0 msecs
    > calling arch_kdebugfs_init+0x0/0x1e0
    > initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 msecs
    > calling mtrr_if_init+0x0/0x7e
    > initcall mtrr_if_init+0x0/0x7e returned 0 after 0 msecs
    > calling ffh_cstate_init+0x0/0x36
    > initcall ffh_cstate_init+0x0/0x36 returned 0 after 0 msecs
    > calling acpi_pci_init+0x0/0x45
    > ACPI: bus type pci registered
    > initcall acpi_pci_init+0x0/0x45 returned 0 after 0 msecs
    > calling init_acpi_device_notify+0x0/0x50
    > initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs
    > calling dmi_id_init+0x0/0x2f1
    > initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 msecs
    > calling pci_arch_init+0x0/0x53
    > PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
    > PCI: MCFG area at f0000000 reserved in E820
    > PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
    > PCI: Using MMCONFIG at f0000000 - f3ffffff
    > PCI: Using configuration type 1 for base access
    > initcall pci_arch_init+0x0/0x53 returned 0 after 14 msecs
    > calling topology_init+0x0/0x96
    > initcall topology_init+0x0/0x96 returned 0 after 0 msecs
    > calling mtrr_init_finialize+0x0/0x42
    > initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 msecs
    > calling param_sysfs_init+0x0/0x1f3
    > initcall param_sysfs_init+0x0/0x1f3 returned 0 after 9 msecs
    > calling pm_sysrq_init+0x0/0x1e
    > initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs
    > calling readahead_init+0x0/0x3d
    > initcall readahead_init+0x0/0x3d returned 0 after 0 msecs
    > calling init_bio+0x0/0xca
    > initcall init_bio+0x0/0xca returned 0 after 0 msecs
    > calling integrity_init+0x0/0x3f
    > initcall integrity_init+0x0/0x3f returned 0 after 0 msecs
    > calling blk_settings_init+0x0/0x2f
    > initcall blk_settings_init+0x0/0x2f returned 0 after 0 msecs
    > calling blk_ioc_init+0x0/0x2f
    > initcall blk_ioc_init+0x0/0x2f returned 0 after 0 msecs
    > calling genhd_device_init+0x0/0x5a
    > initcall genhd_device_init+0x0/0x5a returned 0 after 0 msecs
    > calling blk_dev_integrity_init+0x0/0x2f
    > initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 msecs
    > calling pci_slot_init+0x0/0x4c
    > initcall pci_slot_init+0x0/0x4c returned 0 after 0 msecs
    > calling fbmem_init+0x0/0x8f
    > initcall fbmem_init+0x0/0x8f returned 0 after 0 msecs
    > calling acpi_init+0x0/0x226
    > ACPI: EC: EC description table is found, configuring boot EC
    > ACPI: EC: non-query interrupt received, switching to interrupt mode
    > ACPI: BIOS _OSI(Linux) query ignored via DMI
    > ACPI: Interpreter enabled
    > ACPI: (supports S0 S3 S4 S5)
    > ACPI: Using IOAPIC for interrupt routing
    > initcall acpi_init+0x0/0x226 returned 0 after 25 msecs
    > calling acpi_scan_init+0x0/0x10f
    > initcall acpi_scan_init+0x0/0x10f returned 0 after 52 msecs
    > calling acpi_ec_init+0x0/0x66
    > ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    > ACPI: EC: driver started in interrupt mode
    > initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs
    > calling acpi_pci_root_init+0x0/0x2d
    > ACPI: PCI Root Bridge [PCI0] (0000:00)
    > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    > pci 0000:00:01.0: PME# disabled
    > PCI: 0000:00:07.0 reg 10 32bit mmio: [d8404000, d8404fff]
    > PCI: 0000:00:1b.0 reg 10 64bit mmio: [d8400000, d8403fff]
    > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    > pci 0000:00:1b.0: PME# disabled
    > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    > pci 0000:00:1c.0: PME# disabled
    > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    > pci 0000:00:1c.1: PME# disabled
    > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    > pci 0000:00:1c.2: PME# disabled
    > PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f]
    > PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f]
    > PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f]
    > PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f]
    > PCI: 0000:00:1d.7 reg 10 32bit mmio: [d8405400, d84057ff]
    > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    > pci 0000:00:1d.7: PME# disabled
    > pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    > pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
    > PCI: 0000:00:1f.1 reg 10 io port: [40d8, 40df]
    > PCI: 0000:00:1f.1 reg 14 io port: [40ec, 40ef]
    > PCI: 0000:00:1f.1 reg 18 io port: [40d0, 40d7]
    > PCI: 0000:00:1f.1 reg 1c io port: [40e8, 40eb]
    > PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf]
    > PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf]
    > PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7]
    > PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7]
    > PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3]
    > PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af]
    > PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
    > pci 0000:00:1f.2: PME# supported from D3hot
    > pci 0000:00:1f.2: PME# disabled
    > PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf]
    > PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
    > PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
    > PCI: 0000:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]
    > pci 0000:01:00.0: supports D1
    > pci 0000:01:00.0: supports D2
    > PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
    > PCI: bridge 0000:00:01.0 32bit mmio: [d8300000, d83fffff]
    > PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
    > PCI: 0000:02:00.0 reg 10 64bit mmio: [d8200000, d8203fff]
    > PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff]
    > pci 0000:02:00.0: supports D1
    > pci 0000:02:00.0: supports D2
    > pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    > pci 0000:02:00.0: PME# disabled
    > PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
    > PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d82fffff]
    > PCI: 0000:03:00.0 reg 10 64bit mmio: [d8100000, d810ffff]
    > pci 0000:03:00.0: supports D1
    > pci 0000:03:00.0: PME# supported from D0 D1 D3hot
    > pci 0000:03:00.0: PME# disabled
    > PCI: bridge 0000:00:1c.1 32bit mmio: [d8100000, d81fffff]
    > PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
    > PCI: bridge 0000:00:1c.2 32bit mmio: [d4100000, d80fffff]
    > PCI: bridge 0000:00:1c.2 64bit mmio pref: [d0000000, d3ffffff]
    > PCI: 0000:0c:03.0 reg 10 32bit mmio: [d4004000, d40047ff]
    > PCI: 0000:0c:03.0 reg 14 32bit mmio: [d4000000, d4003fff]
    > pci 0000:0c:03.0: supports D1
    > pci 0000:0c:03.0: supports D2
    > pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
    > pci 0000:0c:03.0: PME# disabled
    > pci 0000:00:1e.0: transparent bridge
    > PCI: bridge 0000:00:1e.0 32bit mmio: [d4000000, d40fffff]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    > initcall acpi_pci_root_init+0x0/0x2d returned 0 after 78 msecs
    > calling acpi_pci_link_init+0x0/0x4d
    > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
    > initcall acpi_pci_link_init+0x0/0x4d returned 0 after 14 msecs
    > calling acpi_power_init+0x0/0x7c
    > initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs
    > calling acpi_system_init+0x0/0x265
    > initcall acpi_system_init+0x0/0x265 returned 0 after 0 msecs
    > calling acpi_cm_sbs_init+0x0/0xd
    > initcall acpi_cm_sbs_init+0x0/0xd returned 0 after 0 msecs
    > calling pnp_init+0x0/0x25
    > Linux Plug and Play Support v0.97 (c) Adam Belay
    > initcall pnp_init+0x0/0x25 returned 0 after 0 msecs
    > calling pnpacpi_init+0x0/0x91
    > pnp: PnP ACPI init
    > ACPI: bus type pnp registered
    > IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
    > IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
    > pnp: PnP ACPI: found 9 devices
    > ACPI: ACPI bus type pnp unregistered
    > initcall pnpacpi_init+0x0/0x91 returned 0 after 20 msecs
    > calling misc_init+0x0/0x9d
    > initcall misc_init+0x0/0x9d returned 0 after 0 msecs
    > calling cn_init+0x0/0xf3
    > initcall cn_init+0x0/0xf3 returned 0 after 0 msecs
    > calling init_scsi+0x0/0x96
    > SCSI subsystem initialized
    > initcall init_scsi+0x0/0x96 returned 0 after 1 msecs
    > calling ata_init+0x0/0x368
    > libata version 3.00 loaded.
    > initcall ata_init+0x0/0x368 returned 0 after 0 msecs
    > calling init_pcmcia_cs+0x0/0x2d
    > initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 msecs
    > calling usb_init+0x0/0x131
    > usbcore: registered new interface driver usbfs
    > usbcore: registered new interface driver hub
    > usbcore: registered new device driver usb
    > initcall usb_init+0x0/0x131 returned 0 after 1 msecs
    > calling serio_init+0x0/0x8e
    > initcall serio_init+0x0/0x8e returned 0 after 0 msecs
    > calling input_init+0x0/0x10c
    > initcall input_init+0x0/0x10c returned 0 after 0 msecs
    > calling rtc_init+0x0/0x75
    > initcall rtc_init+0x0/0x75 returned 0 after 0 msecs
    > calling power_supply_class_init+0x0/0x39
    > initcall power_supply_class_init+0x0/0x39 returned 0 after 0 msecs
    > calling thermal_init+0x0/0x56
    > initcall thermal_init+0x0/0x56 returned 0 after 0 msecs
    > calling md_init+0x0/0xd5
    > initcall md_init+0x0/0xd5 returned 0 after 0 msecs
    > calling leds_init+0x0/0x2f
    > initcall leds_init+0x0/0x2f returned 0 after 0 msecs
    > calling dma_bus_init+0x0/0x31
    > initcall dma_bus_init+0x0/0x31 returned 0 after 0 msecs
    > calling pci_subsys_init+0x0/0x126
    > PCI: Using ACPI for IRQ routing
    > PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    > IOAPIC[0]: Set routing entry (1-16 -> 0x49 -> IRQ 16 Mode:1 Active:1)
    > pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    > pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    > IOAPIC[0]: Set routing entry (1-22 -> 0x51 -> IRQ 22 Mode:1 Active:1)
    > pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    > IOAPIC[0]: Set routing entry (1-17 -> 0x59 -> IRQ 17 Mode:1 Active:1)
    > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    > IOAPIC[0]: Set routing entry (1-18 -> 0x61 -> IRQ 18 Mode:1 Active:1)
    > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    > IOAPIC[0]: Set routing entry (1-23 -> 0x69 -> IRQ 23 Mode:1 Active:1)
    > pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    > IOAPIC[0]: Set routing entry (1-19 -> 0x71 -> IRQ 19 Mode:1 Active:1)
    > pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    > pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    > pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    > pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    > pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    > pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    > pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    > pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    > pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    > pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    > pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    > number of MP IRQ sources: 15.
    > number of IO-APIC #1 registers: 24.
    > testing the IO APIC.......................
    >
    > IO APIC #1......
    > .... register #00: 00000000
    > ....... : physical APIC id: 00
    > .... register #01: 00170020
    > ....... : max redirection entries: 0017
    > ....... : PRQ implemented: 0
    > ....... : IO APIC version: 0020
    > .... register #02: 00170020
    > ....... : arbitration: 00
    > .... IRQ redirection table:
    > NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
    > 00 000 1 0 0 0 0 0 0 00
    > 01 003 0 0 0 0 0 1 1 31
    > 02 003 0 0 0 0 0 1 1 30
    > 03 003 0 0 0 0 0 1 1 33
    > 04 003 0 0 0 0 0 1 1 34
    > 05 003 0 0 0 0 0 1 1 35
    > 06 003 0 0 0 0 0 1 1 36
    > 07 003 0 0 0 0 0 1 1 37
    > 08 003 0 0 0 0 0 1 1 38
    > 09 003 0 1 0 0 0 1 1 39
    > 0a 003 0 0 0 0 0 1 1 3A
    > 0b 003 0 0 0 0 0 1 1 3B
    > 0c 003 0 0 0 0 0 1 1 3C
    > 0d 003 0 0 0 0 0 1 1 3D
    > 0e 003 0 0 0 0 0 1 1 3E
    > 0f 003 0 0 0 0 0 1 1 3F
    > 10 003 1 1 0 1 0 1 1 49
    > 11 003 1 1 0 1 0 1 1 59
    > 12 003 1 1 0 1 0 1 1 61
    > 13 003 1 1 0 1 0 1 1 71
    > 14 000 1 0 0 0 0 0 0 00
    > 15 000 1 0 0 0 0 0 0 00
    > 16 003 1 1 0 1 0 1 1 51
    > 17 003 1 1 0 1 0 1 1 69
    > IRQ to pin mappings:
    > IRQ0 -> 0:2
    > IRQ1 -> 0:1
    > IRQ3 -> 0:3
    > IRQ4 -> 0:4
    > IRQ5 -> 0:5
    > IRQ6 -> 0:6
    > IRQ7 -> 0:7
    > IRQ8 -> 0:8
    > IRQ9 -> 0:9
    > IRQ10 -> 0:10
    > IRQ11 -> 0:11
    > IRQ12 -> 0:12
    > IRQ13 -> 0:13
    > IRQ14 -> 0:14
    > IRQ15 -> 0:15
    > IRQ16 -> 0:16
    > IRQ17 -> 0:17
    > IRQ18 -> 0:18
    > IRQ19 -> 0:19
    > IRQ22 -> 0:22
    > IRQ23 -> 0:23
    > .................................... done.
    > initcall pci_subsys_init+0x0/0x126 returned 0 after 21 msecs
    > calling proto_init+0x0/0x33
    > initcall proto_init+0x0/0x33 returned 0 after 0 msecs
    > calling net_dev_init+0x0/0x1f3
    > initcall net_dev_init+0x0/0x1f3 returned 0 after 0 msecs
    > calling neigh_init+0x0/0x76
    > initcall neigh_init+0x0/0x76 returned 0 after 0 msecs
    > calling fib_rules_init+0x0/0xab
    > initcall fib_rules_init+0x0/0xab returned 0 after 0 msecs
    > calling pktsched_init+0x0/0xc9
    > initcall pktsched_init+0x0/0xc9 returned 0 after 0 msecs
    > calling tc_filter_init+0x0/0x51
    > initcall tc_filter_init+0x0/0x51 returned 0 after 0 msecs
    > calling tc_action_init+0x0/0x51
    > initcall tc_action_init+0x0/0x51 returned 0 after 0 msecs
    > calling genl_init+0x0/0xdd
    > initcall genl_init+0x0/0xdd returned 0 after 3 msecs
    > calling cipso_v4_init+0x0/0x8d
    > initcall cipso_v4_init+0x0/0x8d returned 0 after 0 msecs
    > calling wireless_nlevent_init+0x0/0x46
    > initcall wireless_nlevent_init+0x0/0x46 returned 0 after 0 msecs
    > calling netlbl_init+0x0/0x86
    > NetLabel: Initializing
    > NetLabel: domain hash size = 128
    > NetLabel: protocols = UNLABELED CIPSOv4
    > NetLabel: unlabeled traffic allowed by default
    > initcall netlbl_init+0x0/0x86 returned 0 after 0 msecs
    > calling sysctl_init+0x0/0x32
    > initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs
    > calling pci_iommu_init+0x0/0x21
    > PCI-GART: No AMD northbridge found.
    > initcall pci_iommu_init+0x0/0x21 returned 0 after 0 msecs
    > calling hpet_late_init+0x0/0x107
    > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    > hpet0: 3 64-bit timers, 14318180 Hz
    > initcall hpet_late_init+0x0/0x107 returned 0 after 1 msecs
    > calling clocksource_done_booting+0x0/0x17
    > initcall clocksource_done_booting+0x0/0x17 returned 0 after 0 msecs
    > calling ftrace_init_debugfs+0x0/0xfd
    > initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs
    > calling tracer_alloc_buffers+0x0/0x5a1
    > tracer: 1286 pages allocated for 65536 entries of 80 bytes
    > actual entries 65586
    > initcall tracer_alloc_buffers+0x0/0x5a1 returned 0 after 19 msecs
    > calling init_pipe_fs+0x0/0x51
    > initcall init_pipe_fs+0x0/0x51 returned 0 after 0 msecs
    > calling init_mnt_writers+0x0/0x95
    > initcall init_mnt_writers+0x0/0x95 returned 0 after 0 msecs
    > calling eventpoll_init+0x0/0x9a
    > initcall eventpoll_init+0x0/0x9a returned 0 after 0 msecs
    > calling anon_inode_init+0x0/0x11c
    > initcall anon_inode_init+0x0/0x11c returned 0 after 0 msecs
    > calling acpi_rtc_init+0x0/0xf9
    > ACPI: RTC can wake from S4
    > initcall acpi_rtc_init+0x0/0xf9 returned 0 after 0 msecs
    > calling acpi_event_init+0x0/0x85
    > initcall acpi_event_init+0x0/0x85 returned 0 after 2 msecs
    > calling pnp_system_init+0x0/0x17
    > system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
    > system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
    > system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
    > system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
    > system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    > system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
    > system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
    > system 00:07: ioport range 0x680-0x6ef has been reserved
    > system 00:07: ioport range 0x800-0x80f has been reserved
    > system 00:07: ioport range 0x810-0x817 has been reserved
    > system 00:07: ioport range 0x400-0x47f has been reserved
    > system 00:07: ioport range 0x500-0x53f has been reserved
    > system 00:07: ioport range 0x1640-0x164f has been reserved
    > initcall pnp_system_init+0x0/0x17 returned 0 after 2 msecs
    > calling chr_dev_init+0x0/0x9d
    > initcall chr_dev_init+0x0/0x9d returned 0 after 2 msecs
    > calling firmware_class_init+0x0/0x77
    > initcall firmware_class_init+0x0/0x77 returned 0 after 0 msecs
    > calling loopback_init+0x0/0x17
    > initcall loopback_init+0x0/0x17 returned 0 after 1 msecs
    > calling init_pcmcia_bus+0x0/0x89
    > initcall init_pcmcia_bus+0x0/0x89 returned 0 after 0 msecs
    > calling cpufreq_gov_performance_init+0x0/0x17
    > initcall cpufreq_gov_performance_init+0x0/0x17 returned 0 after 0 msecs
    > calling cpufreq_gov_userspace_init+0x0/0x17
    > initcall cpufreq_gov_userspace_init+0x0/0x17 returned 0 after 0 msecs
    > calling init_acpi_pm_clocksource+0x0/0xae
    > initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs
    > calling pcibios_assign_resources+0x0/0x8d
    > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    > pci 0000:00:01.0: IO window: 0x3000-0x3fff
    > pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
    > pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
    > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    > pci 0000:00:1c.0: IO window: 0x2000-0x2fff
    > pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff
    > pci 0000:00:1c.0: PREFETCH window: 0x000000d8500000-0x000000d85fffff
    > pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    > pci 0000:00:1c.1: IO window: disabled
    > pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff
    > pci 0000:00:1c.1: PREFETCH window: disabled
    > pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
    > Switched to high resolution mode on CPU 1
    > Switched to high resolution mode on CPU 0
    > pci 0000:00:1c.2: IO window: 0x1000-0x1fff
    > pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff
    > pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d3ffffff
    > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
    > pci 0000:00:1e.0: IO window: disabled
    > pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff
    > pci 0000:00:1e.0: PREFETCH window: disabled
    > pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    > PCI: Setting latency timer of device 0000:00:01.0 to 64
    > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    > PCI: Setting latency timer of device 0000:00:1c.0 to 64
    > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    > PCI: Setting latency timer of device 0000:00:1c.1 to 64
    > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    > PCI: Setting latency timer of device 0000:00:1c.2 to 64
    > pci 0000:00:1e.0: power state changed by ACPI to D0
    > PCI: Setting latency timer of device 0000:00:1e.0 to 64
    > bus: 00 index 0 io port: [0, ffff]
    > bus: 00 index 1 mmio: [0, ffffffffffffffff]
    > bus: 01 index 0 io port: [3000, 3fff]
    > bus: 01 index 1 mmio: [d8300000, d83fffff]
    > bus: 01 index 2 mmio: [c0000000, cfffffff]
    > bus: 01 index 3 mmio: [0, 0]
    > bus: 02 index 0 io port: [2000, 2fff]
    > bus: 02 index 1 mmio: [d8200000, d82fffff]
    > bus: 02 index 2 mmio: [d8500000, d85fffff]
    > bus: 02 index 3 mmio: [0, 0]
    > bus: 03 index 0 mmio: [0, 0]
    > bus: 03 index 1 mmio: [d8100000, d81fffff]
    > bus: 03 index 2 mmio: [0, 0]
    > bus: 03 index 3 mmio: [0, 0]
    > bus: 04 index 0 io port: [1000, 1fff]
    > bus: 04 index 1 mmio: [d4100000, d80fffff]
    > bus: 04 index 2 mmio: [d0000000, d3ffffff]
    > bus: 04 index 3 mmio: [0, 0]
    > bus: 0c index 0 mmio: [0, 0]
    > bus: 0c index 1 mmio: [d4000000, d40fffff]
    > bus: 0c index 2 mmio: [0, 0]
    > bus: 0c index 3 io port: [0, ffff]
    > bus: 0c index 4 mmio: [0, ffffffffffffffff]
    > initcall pcibios_assign_resources+0x0/0x8d returned 0 after 10 msecs
    > calling inet_init+0x0/0x354
    > NET: Registered protocol family 2
    > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    > TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    > TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
    > TCP: Hash tables configured (established 524288 bind 65536)
    > TCP reno registered
    > initcall inet_init+0x0/0x354 returned 0 after 39 msecs
    > calling af_unix_init+0x0/0x5a
    > NET: Registered protocol family 1
    > initcall af_unix_init+0x0/0x5a returned 0 after 0 msecs
    > calling populate_rootfs+0x0/0xf3
    > checking if image is initramfs... it is
    > debug: unmapping init memory ffff880037d35000..ffff880037ff0000
    > initcall populate_rootfs+0x0/0xf3 returned 0 after 262 msecs
    > calling calgary_fixup_tce_spaces+0x0/0xfe
    > initcall calgary_fixup_tce_spaces+0x0/0xfe returned -19 after 0 msecs
    > calling i8259A_init_sysfs+0x0/0x27
    > initcall i8259A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
    > calling vsyscall_init+0x0/0x71
    > initcall vsyscall_init+0x0/0x71 returned 0 after 0 msecs
    > calling sbf_init+0x0/0xf4
    > initcall sbf_init+0x0/0xf4 returned 0 after 0 msecs
    > calling i8237A_init_sysfs+0x0/0x27
    > initcall i8237A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
    > calling add_rtc_cmos+0x0/0x1d
    > initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
    > calling cache_sysfs_init+0x0/0x62
    > initcall cache_sysfs_init+0x0/0x62 returned 0 after 2 msecs
    > calling mce_init_device+0x0/0x8a
    > initcall mce_init_device+0x0/0x8a returned 0 after 1 msecs
    > calling periodic_mcheck_init+0x0/0x44
    > initcall periodic_mcheck_init+0x0/0x44 returned 0 after 0 msecs
    > calling thermal_throttle_init_device+0x0/0x92
    > initcall thermal_throttle_init_device+0x0/0x92 returned 0 after 0 msecs
    > calling threshold_init_device+0x0/0x4e
    > initcall threshold_init_device+0x0/0x4e returned 0 after 0 msecs
    > calling msr_init+0x0/0x124
    > initcall msr_init+0x0/0x124 returned 0 after 0 msecs
    > calling cpuid_init+0x0/0x124
    > initcall cpuid_init+0x0/0x124 returned 0 after 0 msecs
    > calling init_lapic_sysfs+0x0/0x32
    > initcall init_lapic_sysfs+0x0/0x32 returned 0 after 0 msecs
    > calling ioapic_init_sysfs+0x0/0xac
    > initcall ioapic_init_sysfs+0x0/0xac returned 0 after 0 msecs
    > calling add_pcspkr+0x0/0x45
    > initcall add_pcspkr+0x0/0x45 returned 0 after 0 msecs
    > calling uv_ptc_init+0x0/0x7a
    > initcall uv_ptc_init+0x0/0x7a returned 0 after 0 msecs
    > calling uv_bau_init+0x0/0x604
    > initcall uv_bau_init+0x0/0x604 returned 0 after 0 msecs
    > calling audit_classes_init+0x0/0xb4
    > initcall audit_classes_init+0x0/0xb4 returned 0 after 0 msecs
    > calling debug_pagealloc_proc_init+0x0/0x30
    > initcall debug_pagealloc_proc_init+0x0/0x30 returned 0 after 0 msecs
    > calling pt_dump_init+0x0/0x30
    > initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs
    > calling init_vdso_vars+0x0/0x219
    > initcall init_vdso_vars+0x0/0x219 returned 0 after 0 msecs
    > calling ia32_binfmt_init+0x0/0x19
    > initcall ia32_binfmt_init+0x0/0x19 returned 0 after 0 msecs
    > calling sysenter_setup+0x0/0x2ad
    > initcall sysenter_setup+0x0/0x2ad returned 0 after 0 msecs
    > calling init_sched_debug_procfs+0x0/0x2c
    > initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs
    > calling create_proc_profile+0x0/0x2cf
    > initcall create_proc_profile+0x0/0x2cf returned 0 after 0 msecs
    > calling ioresources_init+0x0/0x41
    > initcall ioresources_init+0x0/0x41 returned 0 after 0 msecs
    > calling uid_cache_init+0x0/0x92
    > initcall uid_cache_init+0x0/0x92 returned 0 after 0 msecs
    > calling init_posix_timers+0x0/0xa0
    > initcall init_posix_timers+0x0/0xa0 returned 0 after 0 msecs
    > calling init_posix_cpu_timers+0x0/0xb5
    > initcall init_posix_cpu_timers+0x0/0xb5 returned 0 after 0 msecs
    > calling nsproxy_cache_init+0x0/0x32
    > initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 msecs
    > calling timekeeping_init_device+0x0/0x27
    > initcall timekeeping_init_device+0x0/0x27 returned 0 after 0 msecs
    > calling init_clocksource_sysfs+0x0/0x55
    > initcall init_clocksource_sysfs+0x0/0x55 returned 0 after 0 msecs
    > calling init_timer_list_procfs+0x0/0x31
    > initcall init_timer_list_procfs+0x0/0x31 returned 0 after 0 msecs
    > calling init_tstats_procfs+0x0/0x31
    > initcall init_tstats_procfs+0x0/0x31 returned 0 after 0 msecs
    > calling lockdep_proc_init+0x0/0x7c
    > initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 msecs
    > calling futex_init+0x0/0xcc
    > initcall futex_init+0x0/0xcc returned 0 after 0 msecs
    > calling proc_dma_init+0x0/0x27
    > initcall proc_dma_init+0x0/0x27 returned 0 after 0 msecs
    > calling percpu_modinit+0x0/0x79
    > initcall percpu_modinit+0x0/0x79 returned 0 after 0 msecs
    > calling kallsyms_init+0x0/0x2a
    > initcall kallsyms_init+0x0/0x2a returned 0 after 0 msecs
    > calling snapshot_device_init+0x0/0x17
    > initcall snapshot_device_init+0x0/0x17 returned 0 after 0 msecs
    > calling crash_save_vmcoreinfo_init+0x0/0x430
    > initcall crash_save_vmcoreinfo_init+0x0/0x430 returned 0 after 0 msecs
    > calling crash_notes_memory_init+0x0/0x44
    > initcall crash_notes_memory_init+0x0/0x44 returned 0 after 0 msecs
    > calling pid_namespaces_init+0x0/0x32
    > initcall pid_namespaces_init+0x0/0x32 returned 0 after 0 msecs
    > calling audit_init+0x0/0x172
    > audit: initializing netlink socket (disabled)
    > type=2000 audit(1216436777.860:1): initialized
    > initcall audit_init+0x0/0x172 returned 0 after 0 msecs
    > calling audit_tree_init+0x0/0x4e
    > initcall audit_tree_init+0x0/0x4e returned 0 after 0 msecs
    > calling init_kprobes+0x0/0x124
    > initcall init_kprobes+0x0/0x124 returned 0 after 4 msecs
    > calling relay_init+0x0/0x19
    > initcall relay_init+0x0/0x19 returned 0 after 0 msecs
    > calling utsname_sysctl_init+0x0/0x19
    > initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs
    > calling init_lstats_procfs+0x0/0x2a
    > initcall init_lstats_procfs+0x0/0x2a returned 0 after 0 msecs
    > calling init_sched_switch_trace+0x0/0x41
    > initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs
    > calling init_stack_trace+0x0/0x12
    > initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs
    > calling init_function_trace+0x0/0x12
    > initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs
    > calling init_irqsoff_tracer+0x0/0x14
    > initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 msecs
    > calling init_wakeup_tracer+0x0/0x12
    > initcall init_wakeup_tracer+0x0/0x12 returned 0 after 0 msecs
    > calling init_per_zone_pages_min+0x0/0x46
    > initcall init_per_zone_pages_min+0x0/0x46 returned 0 after 0 msecs
    > calling pdflush_init+0x0/0x17
    > initcall pdflush_init+0x0/0x17 returned 0 after 0 msecs
    > calling kswapd_init+0x0/0x7d
    > initcall kswapd_init+0x0/0x7d returned 0 after 0 msecs
    > calling setup_vmstat+0x0/0x4f
    > initcall setup_vmstat+0x0/0x4f returned 0 after 0 msecs
    > calling procswaps_init+0x0/0x27
    > initcall procswaps_init+0x0/0x27 returned 0 after 0 msecs
    > calling hugetlb_init+0x0/0xa0
    > Total HugeTLB memory allocated, 0
    > initcall hugetlb_init+0x0/0xa0 returned 0 after 0 msecs
    > calling init_tmpfs+0x0/0xdf
    > initcall init_tmpfs+0x0/0xdf returned 0 after 0 msecs
    > calling slab_sysfs_init+0x0/0xf5
    > initcall slab_sysfs_init+0x0/0xf5 returned 0 after 30 msecs
    > calling fasync_init+0x0/0x2f
    > initcall fasync_init+0x0/0x2f returned 0 after 0 msecs
    > calling aio_setup+0x0/0x78
    > initcall aio_setup+0x0/0x78 returned 0 after 0 msecs
    > calling inotify_setup+0x0/0x17
    > initcall inotify_setup+0x0/0x17 returned 0 after 0 msecs
    > calling inotify_user_setup+0x0/0xbd
    > initcall inotify_user_setup+0x0/0xbd returned 0 after 0 msecs
    > calling init_sys32_ioctl+0x0/0x8a
    > initcall init_sys32_ioctl+0x0/0x8a returned 0 after 0 msecs
    > calling dquot_init+0x0/0x108
    > VFS: Disk quotas dquot_6.5.1
    > Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    > initcall dquot_init+0x0/0x108 returned 0 after 0 msecs
    > calling init_v2_quota_format+0x0/0x17
    > initcall init_v2_quota_format+0x0/0x17 returned 0 after 0 msecs
    > calling dnotify_init+0x0/0x2f
    > initcall dnotify_init+0x0/0x2f returned 0 after 0 msecs
    > calling vmcore_init+0x0/0x860
    > initcall vmcore_init+0x0/0x860 returned 0 after 0 msecs
    > calling init_devpts_fs+0x0/0x44
    > initcall init_devpts_fs+0x0/0x44 returned 0 after 0 msecs
    > calling init_ramfs_fs+0x0/0x17
    > initcall init_ramfs_fs+0x0/0x17 returned 0 after 0 msecs
    > calling init_hugetlbfs_fs+0x0/0x9d
    > initcall init_hugetlbfs_fs+0x0/0x9d returned 0 after 0 msecs
    > calling init_iso9660_fs+0x0/0x76
    > initcall init_iso9660_fs+0x0/0x76 returned 0 after 0 msecs
    > calling init_nls_cp437+0x0/0x17
    > initcall init_nls_cp437+0x0/0x17 returned 0 after 0 msecs
    > calling init_nls_ascii+0x0/0x17
    > initcall init_nls_ascii+0x0/0x17 returned 0 after 0 msecs
    > calling ipc_init+0x0/0x28
    > msgmni has been set to 5936
    > initcall ipc_init+0x0/0x28 returned 0 after 0 msecs
    > calling ipc_sysctl_init+0x0/0x19
    > initcall ipc_sysctl_init+0x0/0x19 returned 0 after 0 msecs
    > calling init_mqueue_fs+0x0/0xdb
    > initcall init_mqueue_fs+0x0/0xdb returned 0 after 0 msecs
    > calling key_proc_init+0x0/0x5e
    > initcall key_proc_init+0x0/0x5e returned 0 after 0 msecs
    > calling selinux_nf_ip_init+0x0/0x7f
    > SELinux: Registering netfilter hooks
    > initcall selinux_nf_ip_init+0x0/0x7f returned 0 after 0 msecs
    > calling init_sel_fs+0x0/0x6d
    > initcall init_sel_fs+0x0/0x6d returned 0 after 1 msecs
    > calling selnl_init+0x0/0x52
    > initcall selnl_init+0x0/0x52 returned 0 after 0 msecs
    > calling sel_netif_init+0x0/0x6b
    > initcall sel_netif_init+0x0/0x6b returned 0 after 0 msecs
    > calling sel_netnode_init+0x0/0x78
    > initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs
    > calling sel_netport_init+0x0/0x78
    > initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs
    > calling aurule_init+0x0/0x3c
    > initcall aurule_init+0x0/0x3c returned 0 after 0 msecs
    > calling crypto_algapi_init+0x0/0x12
    > initcall crypto_algapi_init+0x0/0x12 returned 0 after 0 msecs
    > calling cryptomgr_init+0x0/0x17
    > initcall cryptomgr_init+0x0/0x17 returned 0 after 0 msecs
    > calling hmac_module_init+0x0/0x17
    > initcall hmac_module_init+0x0/0x17 returned 0 after 0 msecs
    > calling md5_mod_init+0x0/0x17
    > initcall md5_mod_init+0x0/0x17 returned 0 after 0 msecs
    > calling sha1_generic_mod_init+0x0/0x17
    > initcall sha1_generic_mod_init+0x0/0x17 returned 0 after 0 msecs
    > calling bsg_init+0x0/0x128
    > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    > initcall bsg_init+0x0/0x128 returned 0 after 0 msecs
    > calling noop_init+0x0/0x19
    > io scheduler noop registered
    > initcall noop_init+0x0/0x19 returned 0 after 0 msecs
    > calling as_init+0x0/0x19
    > io scheduler anticipatory registered
    > initcall as_init+0x0/0x19 returned 0 after 0 msecs
    > calling deadline_init+0x0/0x19
    > io scheduler deadline registered
    > initcall deadline_init+0x0/0x19 returned 0 after 0 msecs
    > calling cfq_init+0x0/0x99
    > io scheduler cfq registered (default)
    > initcall cfq_init+0x0/0x99 returned 0 after 0 msecs
    > calling debug_objects_init_debugfs+0x0/0x64
    > initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 msecs
    > calling percpu_counter_startup+0x0/0x14
    > initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
    > calling pci_init+0x0/0x3a
    > pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
    > pci 0000:00:1d.0: Performing full reset
    > pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
    > pci 0000:00:1d.1: Performing full reset
    > pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
    > pci 0000:00:1d.2: Performing full reset
    > pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
    > pci 0000:00:1d.3: Performing full reset
    > pci 0000:01:00.0: Boot video device
    > initcall pci_init+0x0/0x3a returned 0 after 1 msecs
    > calling pci_proc_init+0x0/0x70
    > initcall pci_proc_init+0x0/0x70 returned 0 after 0 msecs
    > calling pcie_portdrv_init+0x0/0x52
    > PCI: Setting latency timer of device 0000:00:01.0 to 64
    > pcieport-driver 0000:00:01.0: found MSI capability
    > pci_express 0000:00:01.0cie00: allocate port service
    > pci_express 0000:00:01.0cie03: allocate port service
    > PCI: Setting latency timer of device 0000:00:1c.0 to 64
    > pcieport-driver 0000:00:1c.0: found MSI capability
    > pci_express 0000:00:1c.0cie00: allocate port service
    > pci_express 0000:00:1c.0cie02: allocate port service
    > pci_express 0000:00:1c.0cie03: allocate port service
    > PCI: Setting latency timer of device 0000:00:1c.1 to 64
    > pcieport-driver 0000:00:1c.1: found MSI capability
    > pci_express 0000:00:1c.1cie00: allocate port service
    > pci_express 0000:00:1c.1cie02: allocate port service
    > pci_express 0000:00:1c.1cie03: allocate port service
    > PCI: Setting latency timer of device 0000:00:1c.2 to 64
    > pcieport-driver 0000:00:1c.2: found MSI capability
    > pci_express 0000:00:1c.2cie00: allocate port service
    > pci_express 0000:00:1c.2cie02: allocate port service
    > pci_express 0000:00:1c.2cie03: allocate port service
    > initcall pcie_portdrv_init+0x0/0x52 returned 0 after 7 msecs
    > calling aer_service_init+0x0/0x25
    > initcall aer_service_init+0x0/0x25 returned 0 after 0 msecs
    > calling pci_hotplug_init+0x0/0x22
    > pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    > initcall pci_hotplug_init+0x0/0x22 returned 0 after 0 msecs
    > calling fb_console_init+0x0/0x12b
    > initcall fb_console_init+0x0/0x12b returned 0 after 0 msecs
    > calling vesafb_init+0x0/0x23f
    > initcall vesafb_init+0x0/0x23f returned 0 after 0 msecs
    > calling efifb_init+0x0/0x1f2
    > initcall efifb_init+0x0/0x1f2 returned -19 after 0 msecs
    > calling acpi_reserve_resources+0x0/0xf0
    > initcall acpi_reserve_resources+0x0/0xf0 returned 0 after 0 msecs
    > calling acpi_button_init+0x0/0x63
    > input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    > ACPI: Power Button (FF) [PWRF]
    > input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    > ACPI: Lid Switch [LID0]
    > input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    > ACPI: Power Button (CM) [PWRB]
    > input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    > ACPI: Sleep Button (CM) [SLPB]
    > initcall acpi_button_init+0x0/0x63 returned 0 after 4 msecs
    > calling acpi_fan_init+0x0/0x63
    > initcall acpi_fan_init+0x0/0x63 returned 0 after 0 msecs
    > calling irqrouter_init_sysfs+0x0/0x3d
    > initcall irqrouter_init_sysfs+0x0/0x3d returned 0 after 0 msecs
    > calling acpi_processor_init+0x0/0x10f
    > ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
    > ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
    > Monitor-Mwait will be used to enter C-1 state
    > Monitor-Mwait will be used to enter C-2 state
    > Monitor-Mwait will be used to enter C-3 state
    > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    > ACPI: ACPI0007:00 is registered as cooling_device0
    > ACPI: Processor [CPU0] (supports 8 throttling states)
    > ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
    > ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
    > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    > ACPI: ACPI0007:01 is registered as cooling_device1
    > ACPI: Processor [CPU1] (supports 8 throttling states)
    > initcall acpi_processor_init+0x0/0x10f returned 0 after 22 msecs
    > calling acpi_container_init+0x0/0x47
    > initcall acpi_container_init+0x0/0x47 returned 0 after 17 msecs
    > calling acpi_thermal_init+0x0/0x88
    > initcall acpi_thermal_init+0x0/0x88 returned 0 after 0 msecs
    > calling rand_initialize+0x0/0x31
    > initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs
    > calling tty_init+0x0/0x1ca
    > initcall tty_init+0x0/0x1ca returned 0 after 29 msecs
    > calling pty_init+0x0/0x278
    > initcall pty_init+0x0/0x278 returned 0 after 0 msecs
    > calling hpet_init+0x0/0x6f
    > hpet_resources: 0xfed00000 is busy
    > initcall hpet_init+0x0/0x6f returned 0 after 1 msecs
    > calling nvram_init+0x0/0x8f
    > Non-volatile memory driver v1.2
    > initcall nvram_init+0x0/0x8f returned 0 after 0 msecs
    > calling agp_init+0x0/0x2b
    > Linux agpgart interface v0.103
    > initcall agp_init+0x0/0x2b returned 0 after 0 msecs
    > calling agp_intel_init+0x0/0x2e
    > initcall agp_intel_init+0x0/0x2e returned 0 after 0 msecs
    > calling agp_sis_init+0x0/0x2e
    > initcall agp_sis_init+0x0/0x2e returned 0 after 0 msecs
    > calling agp_via_init+0x0/0x2e
    > initcall agp_via_init+0x0/0x2e returned 0 after 0 msecs
    > calling cn_proc_init+0x0/0x42
    > initcall cn_proc_init+0x0/0x42 returned 0 after 0 msecs
    > calling serial8250_init+0x0/0x148
    > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    > initcall serial8250_init+0x0/0x148 returned 0 after 2 msecs
    > calling serial8250_pnp_init+0x0/0x17
    > initcall serial8250_pnp_init+0x0/0x17 returned 0 after 0 msecs
    > calling serial8250_pci_init+0x0/0x20
    > initcall serial8250_pci_init+0x0/0x20 returned 0 after 0 msecs
    > calling init_kgdboc+0x0/0x1b
    > initcall init_kgdboc+0x0/0x1b returned 0 after 0 msecs
    > calling topology_sysfs_init+0x0/0x5e
    > initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 msecs
    > calling brd_init+0x0/0x172
    > brd: module loaded
    > initcall brd_init+0x0/0x172 returned 0 after 11 msecs
    > calling init_kgdbts+0x0/0x1b
    > initcall init_kgdbts+0x0/0x1b returned 0 after 0 msecs
    > calling net_olddevs_init+0x0/0xa3
    > initcall net_olddevs_init+0x0/0xa3 returned 0 after 0 msecs
    > calling mac_hid_init+0x0/0xd7
    > input: Macintosh mouse button emulation as /devices/virtual/input/input4
    > initcall mac_hid_init+0x0/0xd7 returned 0 after 0 msecs
    > calling init_sd+0x0/0xfd
    > Driver 'sd' needs updating - please use bus_type methods
    > initcall init_sd+0x0/0xfd returned 0 after 0 msecs
    > calling init_sg+0x0/0x145
    > initcall init_sg+0x0/0x145 returned 0 after 0 msecs
    > calling nonstatic_sysfs_init+0x0/0x17
    > initcall nonstatic_sysfs_init+0x0/0x17 returned 0 after 0 msecs
    > calling yenta_socket_init+0x0/0x20
    > initcall yenta_socket_init+0x0/0x20 returned 0 after 0 msecs
    > calling mon_init+0x0/0x11c
    > initcall mon_init+0x0/0x11c returned 0 after 0 msecs
    > calling i8042_init+0x0/0x371
    > PNP: No PS/2 controller found. Probing ports directly.
    > i8042.c: No controller found.
    > initcall i8042_init+0x0/0x371 returned -19 after 2 msecs
    > calling serport_init+0x0/0x39
    > initcall serport_init+0x0/0x39 returned 0 after 0 msecs
    > calling mousedev_init+0x0/0x67
    > mice: PS/2 mouse device common for all mice
    > initcall mousedev_init+0x0/0x67 returned 0 after 4 msecs
    > calling evdev_init+0x0/0x17
    > initcall evdev_init+0x0/0x17 returned 0 after 21 msecs
    > calling atkbd_init+0x0/0x2c
    > initcall atkbd_init+0x0/0x2c returned 0 after 0 msecs
    > calling psmouse_init+0x0/0x78
    > initcall psmouse_init+0x0/0x78 returned 0 after 0 msecs
    > calling cmos_init+0x0/0x35
    > rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    > rtc0: alarms up to one month, y3k
    > initcall cmos_init+0x0/0x35 returned 0 after 1 msecs
    > calling init_ladder+0x0/0x17
    > cpuidle: using governor ladder
    > initcall init_ladder+0x0/0x17 returned 0 after 2 msecs
    > calling init_menu+0x0/0x17
    > cpuidle: using governor menu
    > initcall init_menu+0x0/0x17 returned 0 after 4 msecs
    > calling efivars_init+0x0/0x1f5
    > initcall efivars_init+0x0/0x1f5 returned -19 after 0 msecs
    > calling hid_init+0x0/0x10
    > initcall hid_init+0x0/0x10 returned 0 after 0 msecs
    > calling hid_init+0x0/0x67
    > Marking TSC unstable due to TSC halts in idle
    > usbcore: registered new interface driver hiddev
    > usbcore: registered new interface driver usbhid
    > usbhid: v2.6:USB HID core driver
    > initcall hid_init+0x0/0x67 returned 0 after 1 msecs
    > calling sysctl_core_init+0x0/0x17
    > initcall sysctl_core_init+0x0/0x17 returned 0 after 0 msecs
    > calling flow_cache_init+0x0/0x1ca
    > initcall flow_cache_init+0x0/0x1ca returned 0 after 0 msecs
    > calling llc_init+0x0/0x25
    > initcall llc_init+0x0/0x25 returned 0 after 0 msecs
    > calling snap_init+0x0/0x36
    > initcall snap_init+0x0/0x36 returned 0 after 0 msecs
    > calling rif_init+0x0/0x9a
    > initcall rif_init+0x0/0x9a returned 0 after 0 msecs
    > calling blackhole_module_init+0x0/0x17
    > initcall blackhole_module_init+0x0/0x17 returned 0 after 0 msecs
    > calling sysctl_ipv4_init+0x0/0x53
    > initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 1 msecs
    > calling init_syncookies+0x0/0x1e
    > initcall init_syncookies+0x0/0x1e returned 0 after 0 msecs
    > calling ipv4_netfilter_init+0x0/0x17
    > initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs
    > calling cubictcp_register+0x0/0x6a
    > TCP cubic registered
    > initcall cubictcp_register+0x0/0x6a returned 0 after 0 msecs
    > calling xfrm_user_init+0x0/0x5e
    > Initializing XFRM netlink socket
    > initcall xfrm_user_init+0x0/0x5e returned 0 after 0 msecs
    > calling packet_init+0x0/0x4c
    > NET: Registered protocol family 17
    > initcall packet_init+0x0/0x4c returned 0 after 0 msecs
    > calling hpet_insert_resource+0x0/0x28
    > initcall hpet_insert_resource+0x0/0x28 returned 0 after 0 msecs
    > calling update_mp_table+0x0/0x61b
    > initcall update_mp_table+0x0/0x61b returned 0 after 0 msecs
    > calling lapic_insert_resource+0x0/0x45
    > initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 msecs
    > calling init_lapic_nmi_sysfs+0x0/0x3d
    > initcall init_lapic_nmi_sysfs+0x0/0x3d returned 0 after 0 msecs
    > calling ioapic_insert_resources+0x0/0x54
    > initcall ioapic_insert_resources+0x0/0x54 returned 0 after 0 msecs
    > calling check_early_ioremap_leak+0x0/0x49
    > initcall check_early_ioremap_leak+0x0/0x49 returned 0 after 0 msecs
    > calling sched_init_debug+0x0/0x24
    > initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs
    > calling init_oops_id+0x0/0x28
    > initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs
    > calling disable_boot_consoles+0x0/0x3f
    > initcall disable_boot_consoles+0x0/0x3f returned 0 after 0 msecs
    > calling pm_qos_power_init+0x0/0xcf
    > initcall pm_qos_power_init+0x0/0xcf returned 0 after 0 msecs
    > calling software_resume+0x0/0x1ba
    > initcall software_resume+0x0/0x1ba returned -2 after 0 msecs
    > initcall software_resume+0x0/0x1ba returned with error code -2
    > calling debugfs_kprobe_init+0x0/0x8e
    > initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 0 msecs
    > calling taskstats_init+0x0/0x9a
    > registered taskstats version 1
    > initcall taskstats_init+0x0/0x9a returned 0 after 0 msecs
    > calling fail_page_alloc_debugfs+0x0/0xe9
    > initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 msecs
    > calling fail_make_request_debugfs+0x0/0x1e
    > initcall fail_make_request_debugfs+0x0/0x1e returned 0 after 0 msecs
    > calling random32_reseed+0x0/0x7e
    > initcall random32_reseed+0x0/0x7e returned 0 after 0 msecs
    > calling pci_sysfs_init+0x0/0x51
    > initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 msecs
    > calling acpi_wakeup_device_init+0x0/0xb6
    > initcall acpi_wakeup_device_init+0x0/0xb6 returned 0 after 0 msecs
    > calling acpi_sleep_proc_init+0x0/0x5a
    > initcall acpi_sleep_proc_init+0x0/0x5a returned 0 after 0 msecs
    > calling seqgen_init+0x0/0x14
    > initcall seqgen_init+0x0/0x14 returned 0 after 0 msecs
    > calling late_resume_init+0x0/0x112
    > Magic number: 0:812:108
    > initcall late_resume_init+0x0/0x112 returned 0 after 0 msecs
    > calling scsi_complete_async_scans+0x0/0xf4
    > initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 0 msecs
    > calling memmap_init+0x0/0x9d
    > initcall memmap_init+0x0/0x9d returned 0 after 0 msecs
    > calling pci_mmcfg_late_insert_resources+0x0/0x48
    > initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned 0 after 0 msecs
    > calling tcp_congestion_default+0x0/0x17
    > initcall tcp_congestion_default+0x0/0x17 returned 0 after 0 msecs
    > debug: unmapping init memory ffffffff814eb000..ffffffff8166d000
    > Write protecting the kernel read-only data: 1368k
    > ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
    > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    > PCI: Setting latency timer of device 0000:00:1d.7 to 64
    > ehci_hcd 0000:00:1d.7: EHCI Host Controller
    > drivers/usb/core/inode.c: creating file 'devices'
    > drivers/usb/core/inode.c: creating file '001'
    > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    > ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
    > ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    > ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    > ehci_hcd 0000:00:1d.7: debug port 1
    > ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    > ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
    > ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    > ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    > usb usb1: default language 0x0409
    > usb usb1: uevent
    > usb usb1: usb_probe_device
    > usb usb1: configuration #1 chosen from 1 choice
    > usb usb1: adding 1-0:1.0 (config #1, interface 0)
    > usb 1-0:1.0: uevent
    > hub 1-0:1.0: usb_probe_interface
    > hub 1-0:1.0: usb_probe_interface - got id
    > hub 1-0:1.0: USB hub found
    > hub 1-0:1.0: 8 ports detected
    > hub 1-0:1.0: standalone hub
    > hub 1-0:1.0: no power switching (usb 1.0)
    > hub 1-0:1.0: individual port over-current protection
    > hub 1-0:1.0: power on to power good time: 20ms
    > hub 1-0:1.0: local power source is good
    > hub 1-0:1.0: trying to enable port power on non-switchable hub
    > Clocksource tsc unstable (delta = -305979950 ns)
    > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
    > drivers/usb/core/inode.c: creating file '001'
    > ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
    > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    > usb usb1: Product: EHCI Host Controller
    > usb usb1: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 ehci_hcd
    > usb usb1: SerialNumber: 0000:00:1d.7
    > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
    > modprobe used greatest stack depth: 3792 bytes left
    > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    > ohci_hcd: block sizes: ed 80 td 96
    > USB Universal Host Controller Interface driver v3.0
    > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    > PCI: Setting latency timer of device 0000:00:1d.0 to 64
    > uhci_hcd 0000:00:1d.0: UHCI Host Controller
    > drivers/usb/core/inode.c: creating file '002'
    > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    > uhci_hcd 0000:00:1d.0: detected 2 ports
    > uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    > uhci_hcd 0000:00:1d.0: Performing full reset
    > uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    > uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    > usb usb2: default language 0x0409
    > usb usb2: uevent
    > usb usb2: usb_probe_device
    > usb usb2: configuration #1 chosen from 1 choice
    > usb usb2: adding 2-0:1.0 (config #1, interface 0)
    > usb 2-0:1.0: uevent
    > hub 2-0:1.0: usb_probe_interface
    > hub 2-0:1.0: usb_probe_interface - got id
    > hub 2-0:1.0: USB hub found
    > hub 2-0:1.0: 2 ports detected
    > hub 2-0:1.0: standalone hub
    > hub 2-0:1.0: no power switching (usb 1.0)
    > hub 2-0:1.0: individual port over-current protection
    > hub 2-0:1.0: power on to power good time: 2ms
    > hub 2-0:1.0: local power source is good
    > hub 2-0:1.0: trying to enable port power on non-switchable hub
    > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
    > drivers/usb/core/inode.c: creating file '001'
    > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    > usb usb2: Product: UHCI Host Controller
    > usb usb2: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    > usb usb2: SerialNumber: 0000:00:1d.0
    > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    > PCI: Setting latency timer of device 0000:00:1d.1 to 64
    > uhci_hcd 0000:00:1d.1: UHCI Host Controller
    > drivers/usb/core/inode.c: creating file '003'
    > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    > uhci_hcd 0000:00:1d.1: detected 2 ports
    > uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    > uhci_hcd 0000:00:1d.1: Performing full reset
    > uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    > uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    > usb usb3: default language 0x0409
    > usb usb3: uevent
    > usb usb3: usb_probe_device
    > usb usb3: configuration #1 chosen from 1 choice
    > usb usb3: adding 3-0:1.0 (config #1, interface 0)
    > usb 3-0:1.0: uevent
    > hub 3-0:1.0: usb_probe_interface
    > hub 3-0:1.0: usb_probe_interface - got id
    > hub 3-0:1.0: USB hub found
    > hub 3-0:1.0: 2 ports detected
    > hub 3-0:1.0: standalone hub
    > hub 3-0:1.0: no power switching (usb 1.0)
    > hub 3-0:1.0: individual port over-current protection
    > hub 3-0:1.0: power on to power good time: 2ms
    > hub 3-0:1.0: local power source is good
    > hub 3-0:1.0: trying to enable port power on non-switchable hub
    > ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
    > ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
    > hub 1-0:1.0: port 2 not reset yet, waiting 50ms
    > ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
    > ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
    > hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
    > drivers/usb/core/inode.c: creating file '001'
    > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    > usb usb3: Product: UHCI Host Controller
    > usb usb3: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    > usb usb3: SerialNumber: 0000:00:1d.1
    > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    > PCI: Setting latency timer of device 0000:00:1d.2 to 64
    > uhci_hcd 0000:00:1d.2: UHCI Host Controller
    > drivers/usb/core/inode.c: creating file '004'
    > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    > uhci_hcd 0000:00:1d.2: detected 2 ports
    > uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    > uhci_hcd 0000:00:1d.2: Performing full reset
    > uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    > usb usb4: default language 0x0409
    > usb usb4: uevent
    > usb usb4: usb_probe_device
    > usb usb4: configuration #1 chosen from 1 choice
    > usb usb4: adding 4-0:1.0 (config #1, interface 0)
    > usb 4-0:1.0: uevent
    > hub 4-0:1.0: usb_probe_interface
    > hub 4-0:1.0: usb_probe_interface - got id
    > hub 4-0:1.0: USB hub found
    > hub 4-0:1.0: 2 ports detected
    > hub 4-0:1.0: standalone hub
    > hub 4-0:1.0: no power switching (usb 1.0)
    > hub 4-0:1.0: individual port over-current protection
    > hub 4-0:1.0: power on to power good time: 2ms
    > hub 4-0:1.0: local power source is good
    > hub 4-0:1.0: trying to enable port power on non-switchable hub
    > hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
    > drivers/usb/core/inode.c: creating file '001'
    > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    > usb usb4: Product: UHCI Host Controller
    > usb usb4: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    > usb usb4: SerialNumber: 0000:00:1d.2
    > uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    > PCI: Setting latency timer of device 0000:00:1d.3 to 64
    > uhci_hcd 0000:00:1d.3: UHCI Host Controller
    > drivers/usb/core/inode.c: creating file '005'
    > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    > uhci_hcd 0000:00:1d.3: detected 2 ports
    > uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
    > uhci_hcd 0000:00:1d.3: Performing full reset
    > uhci_hcd 0000:00:1d.3: supports USB remote wakeup
    > uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    > usb usb5: default language 0x0409
    > usb usb5: uevent
    > usb usb5: usb_probe_device
    > usb usb5: configuration #1 chosen from 1 choice
    > usb usb5: adding 5-0:1.0 (config #1, interface 0)
    > usb 5-0:1.0: uevent
    > hub 5-0:1.0: usb_probe_interface
    > hub 5-0:1.0: usb_probe_interface - got id
    > hub 5-0:1.0: USB hub found
    > hub 5-0:1.0: 2 ports detected
    > hub 5-0:1.0: standalone hub
    > hub 5-0:1.0: no power switching (usb 1.0)
    > hub 5-0:1.0: individual port over-current protection
    > hub 5-0:1.0: power on to power good time: 2ms
    > hub 5-0:1.0: local power source is good
    > hub 5-0:1.0: trying to enable port power on non-switchable hub
    > ehci_hcd 0000:00:1d.7: port 4 high speed
    > ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    > usb 1-4: new high speed USB device using ehci_hcd and address 3
    > drivers/usb/core/inode.c: creating file '001'
    > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    > usb usb5: Product: UHCI Host Controller
    > usb usb5: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
    > usb usb5: SerialNumber: 0000:00:1d.3
    > modprobe used greatest stack depth: 3744 bytes left
    > ata_piix 0000:00:1f.1: version 2.12
    > ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    > ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    > PCI: Setting latency timer of device 0000:00:1f.1 to 64
    > ehci_hcd 0000:00:1d.7: port 4 high speed
    > ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    > scsi0 : ata_piix
    > scsi1 : ata_piix
    > ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    > ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    > usb 1-4: uevent
    > usb 1-4: usb_probe_device
    > usb 1-4: configuration #1 chosen from 1 choice
    > usb 1-4: adding 1-4:1.0 (config #1, interface 0)
    > usb 1-4:1.0: uevent
    > drivers/usb/core/inode.c: creating file '003'
    > usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
    > usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    > ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
    > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
    > ata1.00: ATAPI: MAT****ADVD-R UJ-85J, FAV1, max UDMA/66
    > ata1.00: configured for UDMA/66
    > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
    > ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
    > ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
    > hub 1-0:1.0: port 6 not reset yet, waiting 50ms
    > ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
    > ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
    > hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
    > isa bounce pool size: 16 pages
    > scsi 0:0:0:0: CD-ROM MAT****A DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5
    > scsi 0:0:0:0: Attached scsi generic sg0 type 5
    > ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    > ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
    > hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
    > ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
    > ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
    > hub 1-0:1.0: port 7 not reset yet, waiting 50ms
    > ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
    > hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
    > uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
    > hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    > PCI: Setting latency timer of device 0000:00:1f.2 to 64
    > scsi2 : ata_piix
    > scsi3 : ata_piix
    > ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    > ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    > hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    > ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100
    > ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4)
    > ata3.01: configured for UDMA/100
    > usb 2-2: new full speed USB device using uhci_hcd and address 2
    > usb 2-2: ep0 maxpacket = 8
    > usb 2-2: USB quirks for this device: 2
    > scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
    > sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    > sd 2:0:1:0: [sda] Write Protect is off
    > sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    > sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    > sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    > sd 2:0:1:0: [sda] Write Protect is off
    > sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
    > sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    > sda:<7>usb 2-2: skipped 1 descriptor after interface
    > usb 2-2: skipped 1 descriptor after interface
    > usb 2-2: skipped 1 descriptor after interface
    > usb 2-2: default language 0x0409
    > usb 2-2: uevent
    > usb 2-2: usb_probe_device
    > usb 2-2: configuration #1 chosen from 1 choice
    > usb 2-2: adding 2-2:1.0 (config #1, interface 0)
    > usb 2-2:1.0: uevent
    > usbhid 2-2:1.0: usb_probe_interface
    > usbhid 2-2:1.0: usb_probe_interface - got id
    > input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us
    > input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
    > usb 2-2: adding 2-2:1.1 (config #1, interface 1)
    > usb 2-2:1.1: uevent
    > usbhid 2-2:1.1: usb_probe_interface
    > usbhid 2-2:1.1: usb_probe_interface - got id
    > usb 2-2: adding 2-2:1.2 (config #1, interface 2)
    > usb 2-2:1.2: uevent
    > usbhid 2-2:1.2: usb_probe_interface
    > usbhid 2-2:1.2: usb_probe_interface - got id
    > input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us
    > sda1 sda2 sda3 sda4 sda5
    > input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
    > sd 2:0:1:0: [sda] Attached SCSI disk
    > sd 2:0:1:0: Attached scsi generic sg1 type 0
    > modprobe used greatest stack depth: 2304 bytes left
    > drivers/usb/core/inode.c: creating file '002'
    > usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
    > usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    > usb 2-2: Product: Apple Internal Keyboard / Trackpad
    > usb 2-2: Manufacturer: Apple Computer
    > hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
    > hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
    > uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
    > hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
    > hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
    > hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
    > uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
    > hub 4-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    > hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    > usb 4-2: new full speed USB device using uhci_hcd and address 2
    > usb 4-2: ep0 maxpacket = 8
    > usb 4-2: skipped 1 descriptor after interface
    > usb 4-2: default language 0x0409
    > usb 4-2: uevent
    > usb 4-2: usb_probe_device
    > usb 4-2: configuration #1 chosen from 1 choice
    > usb 4-2: adding 4-2:1.0 (config #1, interface 0)
    > usb 4-2:1.0: uevent
    > usbhid 4-2:1.0: usb_probe_interface
    > usbhid 4-2:1.0: usb_probe_interface - got id
    > drivers/usb/core/file.c: looking for a minor, starting at 96
    > hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
    > drivers/usb/core/inode.c: creating file '002'
    > usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
    > usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    > usb 4-2: Product: IR Receiver
    > usb 4-2: Manufacturer: Apple Computer, Inc.
    > hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
    > uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
    > hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
    > hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
    > usb 5-1: new full speed USB device using uhci_hcd and address 2
    > usb 5-1: skipped 1 descriptor after interface
    > usb 5-1: skipped 1 descriptor after interface
    > usb 5-1: uevent
    > usb 5-1: usb_probe_device
    > usb 5-1: configuration #1 chosen from 1 choice
    > usb 5-1: adding 5-1:1.0 (config #1, interface 0)
    > usb 5-1:1.0: uevent
    > usbhid 5-1:1.0: usb_probe_interface
    > usbhid 5-1:1.0: usb_probe_interface - got id
    > input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
    > input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
    > usb 5-1: adding 5-1:1.1 (config #1, interface 1)
    > usb 5-1:1.1: uevent
    > usbhid 5-1:1.1: usb_probe_interface
    > usbhid 5-1:1.1: usb_probe_interface - got id
    > input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8
    > input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
    > drivers/usb/core/inode.c: creating file '002'
    > usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
    > usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    > hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
    > usb usb3: suspend_rh (auto-stop)
    > hub 3-0:1.0: hub_suspend
    > usb usb3: bus auto-suspend
    > usb usb3: suspend_rh
    > kjournald starting. Commit interval 5 seconds
    > EXT3-fs: mounted filesystem with ordered data mode.
    > type=1404 audit(1216436785.373:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
    > SELinux: 8192 avtab hash slots, 171021 rules.
    > SELinux: 8192 avtab hash slots, 171021 rules.
    > SELinux: 8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats
    > SELinux: 72 classes, 171021 rules
    > SELinux: permission open in class dir not defined in policy
    > SELinux: permission open in class file not defined in policy
    > SELinux: permission open in class chr_file not defined in policy
    > SELinux: permission open in class blk_file not defined in policy
    > SELinux: permission open in class fifo_file not defined in policy
    > SELinux: the above unknown classes and permissions will be allowed
    > SELinux: Completing initialization.
    > SELinux: Setting up existing superblocks.
    > SELinux: initialized (dev sda5, type ext3), uses xattr
    > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    > SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
    > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    > SELinux: initialized (dev proc, type proc), uses genfs_contexts
    > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    > type=1403 audit(1216436786.249:3): policy loaded auid=4294967295 ses=4294967295
    > usb usb2: uevent
    > usb 2-0:1.0: uevent
    > usb 2-2: uevent
    > usb 2-2:1.0: uevent
    > usb 2-2:1.1: uevent
    > usb 2-2:1.2: uevent
    > usb usb3: uevent
    > usb 3-0:1.0: uevent
    > usb usb4: uevent
    > usb 4-0:1.0: uevent
    > usb 4-2: uevent
    > usb 4-2:1.0: uevent
    > usb usb5: uevent
    > usb 5-0:1.0: uevent
    > usb 5-1: uevent
    > usb 5-1:1.0: uevent
    > usb 5-1:1.1: uevent
    > usb usb1: uevent
    > usb 1-0:1.0: uevent
    > usb 1-4: uevent
    > usb 1-4:1.0: uevent
    > appletouch 2-2:1.1: usb_probe_interface
    > appletouch 2-2:1.1: usb_probe_interface - got id
    > appletouch: Geyser mode initialized.
    > input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9
    > usbcore: registered new interface driver appletouch
    > intel_rng: FWH not detected
    > iTCO_vendor_support: vendor-support=0
    > ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    > PCI: Setting latency timer of device 0000:03:00.0 to 64
    > ath5k_pci 0000:03:00.0: registered as 'phy0'
    > ath5k phy0: Device not yet supported.
    > ath5k_pci 0000:03:00.0: PCI INT A disabled
    > ACPI: AC Adapter [ADP1] (on-line)
    > ath_hal: module license 'Proprietary' taints kernel.
    > AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    > ACPI: Battery Slot [BAT0] (battery present)
    > Driver 'sr' needs updating - please use bus_type methods
    > sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    > Uniform CD-ROM driver Revision: 3.20
    > sr 0:0:0:0: Attached scsi CD-ROM sr0
    > input: PC Speaker as /devices/platform/pcspkr/input/input10
    > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    > iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
    > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    > i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    > ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
    > ACPI: Device needs an ACPI driver
    > isight_firmware 1-4:1.0: usb_probe_interface
    > isight_firmware 1-4:1.0: usb_probe_interface - got id
    > firmware: requesting isight.fw
    > input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input11
    > ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    > sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    > PCI: Setting latency timer of device 0000:02:00.0 to 64
    > sky2 0000:02:00.0: v1.21 addr 0xd8200000 irq 16 Yukon-EC (0xb6) rev 2
    > sky2 eth0: addr 00:17:f2:d1:e0:6f
    > Unable to load isight firmware
    > usbcore: registered new interface driver isight_firmware
    > firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    > firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
    > firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800
    > ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    > PCI: Setting latency timer of device 0000:03:00.0 to 64
    > MadWifi: ath_attach: Switching rfkill capability off.
    > wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
    > ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17
    > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    > PCI: Setting latency timer of device 0000:00:1b.0 to 64
    > SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    > NET: Registered protocol family 10
    > lo: Disabled Privacy Extensions
    > [drm] Initialized drm 1.1.0 20060810
    > pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    > PCI: Setting latency timer of device 0000:01:00.0 to 64
    > [drm] Initialized radeon 1.29.0 20080528 on minor 0
    > [drm] Setting GART location based on new memory map
    > [drm] Loading R500 Microcode
    > [drm] Num pipes: 1
    > [drm] writeback test succeeded in 1 usecs
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > appletouch: incomplete data package (first byte: 2, length: 4).
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > device-mapper: uevent: version 1.0.3
    > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
    > device-mapper: multipath: version 1.0.5 loaded
    > EXT3 FS on sda5, internal journal
    > kjournald starting. Commit interval 5 seconds
    > EXT3 FS on sda3, internal journal
    > EXT3-fs: mounted filesystem with ordered data mode.
    > SELinux: initialized (dev sda3, type ext3), uses xattr
    > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    > Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k
    > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    > IA-32 Microcode Update Driver: v1.14a
    > firmware: requesting intel-ucode/06-0f-06
    > firmware: requesting intel-ucode/06-0f-06
    > ip6_tables: (C) 2000-2006 Netfilter Core Team
    > nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    > ip_tables: (C) 2000-2006 Netfilter Core Team
    > RPC: Registered udp transport module.
    > RPC: Registered tcp transport module.
    > SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    > warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
    > fuse init (API version 7.9)
    > SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
    > usb usb3: usb auto-resume
    > usb usb3: wakeup_rh
    > hub 3-0:1.0: hub_resume
    > hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    > usb usb3: suspend_rh (auto-stop)
    > uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us
    > uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us
    > hub 3-0:1.0: hub_suspend
    > usb usb3: bus auto-suspend
    > usb usb3: suspend_rh
    > Bluetooth: Core ver 2.11
    > NET: Registered protocol family 31
    > Bluetooth: HCI device and connection manager initialized
    > Bluetooth: HCI socket layer initialized
    > Bluetooth: L2CAP ver 2.9
    > Bluetooth: L2CAP socket layer initialized
    > Bluetooth: RFCOMM socket layer initialized
    > Bluetooth: RFCOMM TTY layer initialized
    > Bluetooth: RFCOMM ver 1.8
    > Bluetooth: BNEP (Ethernet Emulation) ver 1.2
    > Bluetooth: BNEP filters: protocol multicast
    > Bridge firewalling registered
    > pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > [drm] Num pipes: 1
    > [drm] Setting GART location based on new memory map
    > [drm] Loading R500 Microcode
    > [drm] Num pipes: 1
    > [drm] writeback test succeeded in 1 usecs
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > ath0: no IPv6 routers present
    > CPU0 attaching NULL sched-domain.
    > CPU1 attaching NULL sched-domain.
    > CPU0 attaching sched-domain:
    > domain 0: span 0-1 level MC
    > groups: 0 1
    > domain 1: span 0-1 level NODE
    > groups: 0-1
    > CPU1 attaching sched-domain:
    > domain 0: span 0-1 level MC
    > groups: 1 0
    > domain 1: span 0-1 level NODE
    > groups: 0-1
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
    > CPU0 attaching NULL sched-domain.
    > CPU1 attaching NULL sched-domain.
    > CPU0 attaching sched-domain:
    > domain 0: span 0-1 level MC
    > groups: 0 1
    > domain 1: span 0-1 level NODE
    > groups: 0-1
    > CPU1 attaching sched-domain:
    > domain 0: span 0-1 level MC
    > groups: 1 0
    > domain 1: span 0-1 level NODE
    > groups: 0-1
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
    > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
    >
    >
    >
    >
    >
    >
    > On Fri, Jul 18, 2008 at 06:22:08PM -0700, Yinghai Lu wrote:
    >> On Fri, Jul 18, 2008 at 5:58 PM, Jack Howarth wrote:
    >> > YH,
    >> > The patch you posted did not apply cleanly to tonight's or last night's linus kernel git.
    >> > I had to correct it by hand and this is what I applied...

    >>
    >> it should apply cleanly to linus tree too.
    >>
    >> please check the patch i sent out before and addon fix patch
    >>
    >> YH

    >
    >> [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved
    >>
    >> for MacBookPro2
    >>
    >> change the mconf bus range from [0,0xff] to to [0, 0x3f]
    >> to match range [0xf0000000, 0xf4000000) in e820 tables.
    >>
    >> Signed-off-by: Yinghai Lu
    >>
    >> ---
    >> arch/x86/pci/mmconfig-shared.c | 64 ++++++++++++++++++++++++++++++-----------
    >> 1 file changed, 47 insertions(+), 17 deletions(-)
    >>
    >> Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
    >> ================================================== =================
    >> --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
    >> +++ linux-2.6/arch/x86/pci/mmconfig-shared.c
    >> @@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re
    >> return AE_OK;
    >> }
    >>
    >> -static int __init is_acpi_reserved(unsigned long start, unsigned long end)
    >> +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
    >> {
    >> struct resource mcfg_res;
    >>
    >> @@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig
    >> return mcfg_res.flags;
    >> }
    >>
    >> +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
    >> +
    >> +static int __init is_mmconf_reserved(check_reserved_t is_reserved,
    >> + u64 addr, u64 size, int i,
    >> + typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
    >> +{
    >> + u64 old_size = size;
    >> + int valid = 0;
    >> +
    >> + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
    >> + size >>= 1;
    >> + if (size < (16UL<<20))
    >> + break;
    >> + }
    >> +
    >> + if (size >= (16UL<<20) || size == old_size) {
    >> + printk(KERN_NOTICE
    >> + "PCI: MCFG area at %Lx reserved in %s\n",
    >> + addr, with_e820?"E820":"ACPI motherboard resources");
    >> + valid = 1;
    >> +
    >> + if (old_size != size) {
    >> + /* update end_bus_number */
    >> + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
    >> + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
    >> + "segment %hu buses %u - %u\n",
    >> + i, (unsigned long)cfg->address, cfg->pci_segment,
    >> + (unsigned int)cfg->start_bus_number,
    >> + (unsigned int)cfg->end_bus_number);
    >> + }
    >> + }
    >> +
    >> + return valid;
    >> +}
    >> +
    >> static void __init pci_mmcfg_reject_broken(int early)
    >> {
    >> typeof(pci_mmcfg_config[0]) *cfg;
    >> @@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok
    >>
    >> for (i = 0; i < pci_mmcfg_config_num; i++) {
    >> int valid = 0;
    >> - u32 size = (cfg->end_bus_number + 1) << 20;
    >> + u64 addr, size;
    >> +
    >> cfg = &pci_mmcfg_config[i];
    >> + addr = cfg->start_bus_number;
    >> + addr <<= 20;
    >> + size = cfg->end_bus_number + 1 - cfg->start_bus_number;
    >> + size <<= 20;
    >> printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
    >> "segment %hu buses %u - %u\n",
    >> i, (unsigned long)cfg->address, cfg->pci_segment,
    >> (unsigned int)cfg->start_bus_number,
    >> (unsigned int)cfg->end_bus_number);
    >>
    >> - if (!early &&
    >> - is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
    >> - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
    >> - "in ACPI motherboard resources\n",
    >> - cfg->address);
    >> - valid = 1;
    >> - }
    >> + if (!early)
    >> + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
    >>
    >> if (valid)
    >> continue;
    >> @@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok
    >> printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
    >> " reserved in ACPI motherboard resources\n",
    >> cfg->address);
    >> +
    >> /* Don't try to do this check unless configuration
    >> type 1 is available. how about type 2 ?*/
    >> - if (raw_pci_ops && e820_all_mapped(cfg->address,
    >> - cfg->address + size - 1,
    >> - E820_RESERVED)) {
    >> - printk(KERN_NOTICE
    >> - "PCI: MCFG area at %Lx reserved in E820\n",
    >> - cfg->address);
    >> - valid = 1;
    >> - }
    >> + if (raw_pci_ops)
    >> + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
    >>
    >> if (!valid)
    >> goto reject;

    >
    >> [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved
    >>
    >> Signed-off-by: Yinghai Lu
    >>
    >> diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
    >> index 9297882..429c701 100644
    >> --- a/arch/x86/pci/mmconfig-shared.c
    >> +++ b/arch/x86/pci/mmconfig-shared.c
    >> @@ -364,6 +364,7 @@ static void __init pci_mmcfg_reject_broken(int early)
    >> cfg = &pci_mmcfg_config[i];
    >> addr = cfg->start_bus_number;
    >> addr <<= 20;
    >> + addr += cfg->address;
    >> size = cfg->end_bus_number + 1 - cfg->start_bus_number;
    >> size <<= 20;
    >> printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "

    >
    > --
    > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    > the body of a message to majordomo@vger.kernel.org
    > More majordomo info at http://vger.kernel.org/majordomo-info.html
    > Please read the FAQ at http://www.tux.org/lkml/
    >


    Sorry to jump in; I just sent a post:
    this is happening with the macbook pro ati chipset as well.
    just did a reinstall, and am confronted with this.
    regards;

    --
    Justin P. Mattock
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  19. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Fri, Jul 18, 2008 at 8:28 PM, Jack Howarth wrote:
    > YH,
    > The mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch both applied
    > cleanly to the current linus kernel git and solve my problems with MMCONFIG not starting.
    > I am attaching a dmesg log below of a boot with 'debug apic=verbose initcall_debug pci=routeirq'.
    > If you look at the section immediately before the line...
    >
    > pci 0000:00:1e.0: transparent bridge
    >
    > you will see that it is radically different from what I posted for the freeze under PCIEASPM
    > with MMCONFIG (using your original mmconfig patch)...


    calling pci_arch_init+0x0/0x53
    PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
    PCI: MCFG area at f0000000 reserved in E820
    PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
    PCI: Using MMCONFIG at f0000000 - f3ffffff
    PCI: Using configuration type 1 for base access
    initcall pci_arch_init+0x0/0x53 returned 0 after 14 msecs

    that mean it reduce the bus number according to e820 reserved area.

    YH
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  20. Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

    On Fri, Jul 18, 2008 at 09:45:08PM -0700, Yinghai Lu wrote:
    > On Fri, Jul 18, 2008 at 8:28 PM, Jack Howarth wrote:
    > > YH,
    > > The mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch both applied
    > > cleanly to the current linus kernel git and solve my problems with MMCONFIG not starting.
    > > I am attaching a dmesg log below of a boot with 'debug apic=verbose initcall_debug pci=routeirq'.
    > > If you look at the section immediately before the line...
    > >
    > > pci 0000:00:1e.0: transparent bridge
    > >
    > > you will see that it is radically different from what I posted for the freeze under PCIEASPM
    > > with MMCONFIG (using your original mmconfig patch)...

    >
    > calling pci_arch_init+0x0/0x53
    > PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
    > PCI: MCFG area at f0000000 reserved in E820
    > PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
    > PCI: Using MMCONFIG at f0000000 - f3ffffff
    > PCI: Using configuration type 1 for base access
    > initcall pci_arch_init+0x0/0x53 returned 0 after 14 msecs
    >
    > that mean it reduce the bus number according to e820 reserved area.
    >
    > YH


    YH,
    Would that imply that this might be more fallout of the BIOS bug in the
    MacBook Pro where insufficient address space is reserved for the number of
    buses claimed? Is there some point in the PCIEASPM based code where you
    could duplicate the same sort of fix? I would be happy to test any debug
    patches that might help pinpoint where such a fix is needed.
    Jack
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

+ Reply to Thread
Page 1 of 2 1 2 LastLast