[bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten - Kernel

This is a discussion on [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten - Kernel ; * Pekka J Enberg wrote: > > Object 0xf658ae70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk > > It's bit unfortunate that we don't see full dump of the corruption ...

+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 21 to 40 of 55

Thread: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

  1. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten


    * Pekka J Enberg wrote:

    > > Object 0xf658ae70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk

    >
    > It's bit unfortunate that we don't see full dump of the corruption
    > here because SLUB limits the output to 128 bytes. Ingo, you might want
    > to try this patch so that we can see all of it:


    ok, applied this as a debug special to tip/out-of-tree - future
    incidents should have the full object dump.

    would makes sense for upstream too i think, or increase the limit to 4K
    or so. (which is still fair to be dumped into a syslog)

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  2. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    On Fri, Jul 18, 2008 at 12:11 PM, Ingo Molnar wrote:
    >
    > * Pekka J Enberg wrote:
    >
    >> > Object 0xf658ae70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk

    >>
    >> It's bit unfortunate that we don't see full dump of the corruption
    >> here because SLUB limits the output to 128 bytes. Ingo, you might want
    >> to try this patch so that we can see all of it:

    >
    > ok, applied this as a debug special to tip/out-of-tree - future
    > incidents should have the full object dump.
    >
    > would makes sense for upstream too i think, or increase the limit to 4K
    > or so. (which is still fair to be dumped into a syslog)


    SLUB already limits object sizes to less than PAGE_SIZE so the patch
    should be fine. Christoph, are you okay with this going upstream?
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  3. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    Hi Ingo,

    On Fri, Jul 18, 2008 at 12:09 PM, Ingo Molnar wrote:
    > yeah, we want to check use-after free at the next allocation point -
    > i.e. as late as possible to gather all corruptions that happened
    > meanwhile.
    >
    > We could in theory have a SLUB debug mode where a SCHED_IDLE kernel
    > thread would periodically check all free objects (of that CPU) in the
    > background to ensure their integrity. That would catch corruptions
    > sooner, with a possibly still meaningful context to print out. [right
    > after the IRQ or process that corrupts them finishes running]
    >
    > It could also be hooked into ftrace to print out the last few hundred
    > kernel function calls executed prior any corruption. ftrace/slub-debug
    > plugin perhaps?


    Well, there's this Norwegian guy, Vegard, who has written a small
    piece of code that can detect use-after-free _as it happens_. I think
    he calls the thing kmemcheck :-).
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  4. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten


    * Pekka Enberg wrote:

    > On Fri, Jul 18, 2008 at 8:46 AM, Evgeniy Polyakov wrote:
    > > Does SLUB have a debug check at freeing time? If so, how does it work
    > > and why didn't it caught use after free there?

    >
    > You can't detect use after free before the object is actually free'd
    > ;-)


    yeah, we want to check use-after free at the next allocation point -
    i.e. as late as possible to gather all corruptions that happened
    meanwhile.

    We could in theory have a SLUB debug mode where a SCHED_IDLE kernel
    thread would periodically check all free objects (of that CPU) in the
    background to ensure their integrity. That would catch corruptions
    sooner, with a possibly still meaningful context to print out. [right
    after the IRQ or process that corrupts them finishes running]

    It could also be hooked into ftrace to print out the last few hundred
    kernel function calls executed prior any corruption. ftrace/slub-debug
    plugin perhaps?

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  5. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    Hi Pekka.

    On Fri, Jul 18, 2008 at 12:02:26PM +0300, Pekka Enberg (penberg@cs.helsinki.fi) wrote:
    > > Out of curiosity, why does it scream at allocation time?

    >
    > Because it's checking for use-after-free errors. The object is
    > poisoned with POISON_FREE when it's free'd and we verify the poison
    > values at allocation time.


    Does it also scream on double free event? Just to closer guilty
    circles... 0x9c offset is somewhere at the very end of the skbuff
    structure, likely skb->users.

    Can you also check in some kind of this patch to catch freed skb freeing
    for testing?

    diff --git a/net/core/skbuff.c b/net/core/skbuff.c
    index 3666216..dda96bf 100644
    --- a/net/core/skbuff.c
    +++ b/net/core/skbuff.c
    @@ -419,6 +419,14 @@ void kfree_skb(struct sk_buff *skb)
    {
    if (unlikely(!skb))
    return;
    +
    + {
    + u8 *ptr = (u8 *)(&skb->users);
    +
    + if (*ptr == POISON_FREE || *ptr == POISON_INUSE || *ptr == POISON_END)
    + BUG();
    + }
    +
    if (likely(atomic_read(&skb->users) == 1))
    smp_rmb();
    else if (likely(!atomic_dec_and_test(&skb->users)))

    --
    Evgeniy Polyakov
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  6. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    Pekka Enberg wrote:
    > On Fri, Jul 18, 2008 at 12:11 PM, Ingo Molnar wrote:
    >> * Pekka J Enberg wrote:
    >>
    >>>> Object 0xf658ae70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    >>> It's bit unfortunate that we don't see full dump of the corruption
    >>> here because SLUB limits the output to 128 bytes. Ingo, you might want
    >>> to try this patch so that we can see all of it:

    >> ok, applied this as a debug special to tip/out-of-tree - future
    >> incidents should have the full object dump.
    >>
    >> would makes sense for upstream too i think, or increase the limit to 4K
    >> or so. (which is still fair to be dumped into a syslog)

    >
    > SLUB already limits object sizes to less than PAGE_SIZE so the patch
    > should be fine. Christoph, are you okay with this going upstream?


    I am fine with the patch. Just be aware that we are going to be shoveling a lot of stuff into the log. The object size can be greater than 4k for non kmalloc slab caches. True in general object sizes are <4k.


    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  7. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten


    >> INFO: 0xf658ae9c-0xf658ae9c. First byte 0x6a instead of 0x6b

    >
    > 0x6b is POISON_FREE so 0x6a is one bit corruption.


    Typically this means that a refcount at the head of the object was decremented. But the object was already freed.
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  8. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    Hi Evgeniy,

    On Fri, Jul 18, 2008 at 12:02:26PM +0300, Pekka Enberg
    (penberg@cs.helsinki.fi) wrote:
    >> > Out of curiosity, why does it scream at allocation time?

    >>
    >> Because it's checking for use-after-free errors. The object is
    >> poisoned with POISON_FREE when it's free'd and we verify the poison
    >> values at allocation time.


    On Fri, Jul 18, 2008 at 1:16 PM, Evgeniy Polyakov wrote:
    > Does it also scream on double free event? Just to closer guilty
    > circles... 0x9c offset is somewhere at the very end of the skbuff
    > structure, likely skb->users.


    Yeah. See the free_debug_processing() function in mm/slub.c for
    details (the on_freelist() part). However, if you look at slab_free()
    you can see that in the SLUB fast-path we don't do any of these
    debugging checks. So you can end up with slab corruption without a
    nice error message.

    Pekka
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  9. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    Pekka Enberg wrote:

    > Yeah. See the free_debug_processing() function in mm/slub.c for
    > details (the on_freelist() part). However, if you look at slab_free()
    > you can see that in the SLUB fast-path we don't do any of these
    > debugging checks. So you can end up with slab corruption without a
    > nice error message.


    The slub fastpath is not used when debugging is enabled.

    Without debugging on double frees will typically corrupt the freepointer. So you get an invalid pointer reference in __slab_free.

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  10. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    Hi Pekka.

    On Fri, Jul 18, 2008 at 05:44:44PM +0300, Pekka Enberg (penberg@cs.helsinki.fi) wrote:
    > Yeah. See the free_debug_processing() function in mm/slub.c for
    > details (the on_freelist() part). However, if you look at slab_free()
    > you can see that in the SLUB fast-path we don't do any of these
    > debugging checks. So you can end up with slab corruption without a
    > nice error message.


    Yup, I see.

    Actually with the network there will be no duuble free as long as uses
    use kfree_skb(), since first freeing (with skb->users being equal to 1,
    so user owns this skb) will fill skb with 0x6b, so any subsequent
    kfree_skb() will try to decrement particulary huge reference counter
    (0x6b6b6b6b) and actually will never reach 1 again, so things will look
    quite clear, but if the same slub area will be reused for the next skb
    before it is freed second time, very hard-to-debug data corruption will
    happen, so I belive this kind of checks should be done into kfree_skb()
    (of course under special debug compile option). I posted that patch just
    for the reference and that Ingo would be able to detect where skb is
    used after already being freed.

    --
    Evgeniy Polyakov
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  11. Re: [bug] Attempt to release alive inet socket f6fac040


    Hm, just got another skb related weirdness and crash on that testbox:

    [ 13.495000] usb 1-0:1.0: uevent
    [ 19.392000] Attempt to release alive inet socket f6fac040
    [ 20.387000] EXT3 FS on sda1, internal journal
    [ 20.762500] eth0: no IPv6 routers present
    [ 22.431000] warning: process `kudzu' used the deprecated sysctl system call with 1.23.
    [ 22.906000] ------------[ cut here ]------------
    [ 22.906000] kernel BUG at mm/slab.c:2927!
    [ 22.906000] invalid opcode: 0000 [#1] PREEMPT SMP
    [ 22.906000] Modules linked in:
    [ 22.906000]
    [ 22.906000] Pid: 1831, comm: ip6tables-resto Tainted: G W (2.6.26-tip-03923-g2c96bcb-dirty #3134)
    [ 22.906000] EIP: 0060:[] EFLAGS: 00010046 CPU: 0
    [ 22.906000] EIP is at cache_alloc_refill+0xfa/0x431
    [ 22.906000] EAX: 00000004 EBX: f6ec1a00 ECX: f67826c0 EDX: f6fa3c40
    [ 22.906000] ESI: f6fac000 EDI: 0000000b EBP: f5c01ec4 ESP: f5c01e70
    [ 22.906000] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
    [ 22.906000] Process ip6tables-resto (pid: 1831, ti=f5c01000 task=f5d2f060 task.ti=f5c01000)
    [ 22.906000] Stack: 00000004 00000004 000000d0 000000d0 f67826c8 f67826d0 f6fac01c 000080d0
    [ 22.906000] f6fa3c40 f6fa9800 f67826c0 00000000 7f431025 b014a3e9 b2bd6ab8 00000000
    [ 22.906000] 00000000 00000000 00000246 f6fa3c40 f6fa3c40 f5c01ee4 b0187793 b07c11d6
    [ 22.906000] Call Trace:
    [ 22.906000] [] ? __wake_up_bit+0xc/0x37
    [ 22.906000] [] ? kmem_cache_alloc+0x53/0x98
    [ 22.906000] [] ? sk_prot_alloc+0x1e/0xa7
    [ 22.906000] [] ? cap_capable+0xa/0x2b
    [ 22.906000] [] ? sk_alloc+0x20/0xa3
    [ 22.906000] [] ? inet6_create+0x187/0x316
    [ 22.906000] [] ? __sock_create+0x15b/0x229
    [ 22.906000] [] ? sock_create+0x29/0x2e
    [ 22.906000] [] ? sys_socket+0x1e/0x42
    [ 22.906000] [] ? sys_socketcall+0x56/0x163
    [ 22.906000] [] ? resume_userspace+0x8/0x30
    [ 22.906000] [] ? sysenter_past_esp+0x78/0xb9
    [ 22.906000] =======================
    [ 22.906000] Code: bb 00 00 00 8b 45 d4 8b 30 39 c6 75 13 c7 40 50 01 00 00 00 8b 70 10 3b 75 c0 0f 84 94 00 00 00 8b 55 cc 8b 42 38 39 46 10 72 37 <0f> 0b eb fe 8b 0b 89 4d ac 8b 56 14 8b 45 cc 0f af 50 2c 03 56
    [ 22.906000] EIP: [] cache_alloc_refill+0xfa/0x431 SS:ESP 0068:f5c01e70
    [ 22.906000] Kernel panic - not syncing: Fatal exception
    [ 22.906000] Pid: 1831, comm: ip6tables-resto Tainted: G D W 2.6.26-tip-03923-g2c96bcb-dirty #3134

    Config and full crashlog at:

    http://redhat.com/~mingo/misc/config..._CEST_2008.bad
    http://redhat.com/~mingo/misc/crash-...3-g2c96bcb.log

    Note, the first warning the bootlog is here:

    [ 10.039500] initcall ip6_queue_init+0x0/0x111 returned 0 after 0 msecs
    [ 10.039500] calling ip6_tunnel_init+0x0/0x91
    [ 10.039500] ------------[ cut here ]------------
    [ 10.039500] WARNING: at net/core/dst.c:265 dst_release+0x24/0x2b()
    [ 10.039500] Modules linked in:
    [ 10.039500] Pid: 7, comm: ksoftirqd/1 Not tainted 2.6.26-tip-03923-g2c96bcb-dirty #3134
    [ 10.040500] [] warn_on_slowpath+0x46/0x6a
    [ 10.040500] [] ? put_lock_stats+0xd/0x21
    [ 10.040500] [] ? __lock_acquire+0x5ba/0x618
    [ 10.040500] [] ? put_lock_stats+0xd/0x21
    [ 10.040500] [] dst_release+0x24/0x2b
    [ 10.040500] [] skb_release_all+0x13/0x83
    [ 10.041500] [] __kfree_skb+0x10/0x6b
    [ 10.041500] [] net_tx_action+0x6e/0xee
    [ 10.041500] [] __do_softirq+0x7a/0xe8
    [ 10.041500] [] ? __do_softirq+0x0/0xe8
    [ 10.041500] [] do_softirq+0x79/0xba
    [ 10.041500] [] ksoftirqd+0x88/0x13b
    [ 10.042500] [] ? ksoftirqd+0x0/0x13b
    [ 10.042500] [] kthread+0x40/0x67
    [ 10.042500] [] ? kthread+0x0/0x67
    [ 10.042500] [] kernel_thread_helper+0x7/0x10
    [ 10.042500] =======================
    [ 10.042500] ---[ end trace 5c376f440d7caa15 ]---
    [ 10.042500] Attempt to release alive inet socket f6fac040
    [ 10.043500] initcall ip6_tunnel_init+0x0/0x91 returned 0 after 3 msecs
    [ 10.043500] calling packet_init+0x0/0x3e

    That does seem to be quite specific.

    Note, this box never had skb problems and was running hundreds of
    similar boot tests every day - these appeared in this merge window.

    The upstream base of 2.6.26-tip-03923-g2c96bcb is v2.6.26-3465-g5b664cb.

    I'll now check how reproducible this crash is.

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  12. Re: [bug] Attempt to release alive inet socket f6fac040


    * Ingo Molnar wrote:

    > Hm, just got another skb related weirdness and crash on that testbox:


    Totally weird bug. Using the same bzImage i was able to crash the box 2
    times in a row. Then i tried another (but similarly configured) kernel
    and it wouldnt crash.

    Then i tried the original bzImage again (bit for bit equivalent) and it
    wouldnt crash 5 times in a row.

    I've attached the second crashlog below - in case it's interesting to
    anyone.

    This cannot be random corruption or hw flakiness as the two crashes in a
    row are so similar. One (remote) possibility would be for some hw
    component to be in a weird state that doesnt get proper re-initialized
    after reboot. As long as that condition lingered, it would crash. Once
    that condition was gone, it wouldnt crash.

    For now i've given up on this variant of the bug. I'll continue with
    randconfig searching - maybe another config gives us something more
    debuggable ...

    And note that this time it was SLAB not SLUB - so any SLUB impact is
    highly unlikely. (i strongly suspect some hw initialization issue.)

    Ingo

    -------------------->
    [ 0.000000] Linux version 2.6.26-tip-03923-g2c96bcb-dirty (mingo@europe) (gcc version 4.2.2) #3134 SMP PREEMPT Fri Jul 18 20:06:13 CEST 2008
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
    [ 0.000000] BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    [ 0.000000] debug: ignoring loglevel setting.
    [ 0.000000] using polling idle threads.
    [ 0.000000] last_pfn = 0x7f6e0 max_arch_pfn = 0x100000
    [ 0.000000] kernel direct mapping tables up to 48000000 @ 7000-c000
    [ 0.000000] ACPI: RSDP 000F68A0, 0024 (r2 LENOVO)
    [ 0.000000] ACPI: XSDT 7F6E631F, 0074 (r1 LENOVO TP-79 1020 LTP 0)
    [ 0.000000] ACPI: FACP 7F6E6400, 00F4 (r3 LENOVO TP-79 1020 LNVO 1)
    [ 0.000000] ACPI Warning (tbfadt-0447): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
    [ 0.000000] ACPI: DSDT 7F6E65E7, C765 (r1 LENOVO TP-79 1020 MSFT 100000E)
    [ 0.000000] ACPI: FACS 7F6F4000, 0040
    [ 0.000000] ACPI: SSDT 7F6E65B4, 0033 (r1 LENOVO TP-79 1020 MSFT 100000E)
    [ 0.000000] ACPI: ECDT 7F6F2D4C, 0052 (r1 LENOVO TP-79 1020 LNVO 1)
    [ 0.000000] ACPI: TCPA 7F6F2D9E, 0032 (r2 LENOVO TP-79 1020 LNVO 1)
    [ 0.000000] ACPI: APIC 7F6F2DD0, 0068 (r1 LENOVO TP-79 1020 LNVO 1)
    [ 0.000000] ACPI: MCFG 7F6F2E38, 003E (r1 LENOVO TP-79 1020 LNVO 1)
    [ 0.000000] ACPI: HPET 7F6F2E76, 0038 (r1 LENOVO TP-79 1020 LNVO 1)
    [ 0.000000] ACPI: BOOT 7F6F2FD8, 0028 (r1 LENOVO TP-79 1020 LTP 1)
    [ 0.000000] ACPI: SSDT 7F6E58DA, 0507 (r1 LENOVO TP-79 1020 INTL 20050513)
    [ 0.000000] ACPI: SSDT 7F6E5702, 01D8 (r1 LENOVO TP-79 1020 INTL 20050513)
    [ 0.000000] Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used
    [ 0.000000] Entering add_active_range(0, 0x100, 0x7f6e0) 1 entries of 256 used
    [ 0.000000] 886MB HIGHMEM available.
    [ 0.000000] 1152MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 48000000
    [ 0.000000] low ram: 00000000 - 48000000
    [ 0.000000] bootmap 00008000 - 00011000
    [ 0.000000] (8 early reservations) ==> bootmem
    [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    [ 0.000000] #3 [0000100000 - 0000cec520] TEXT DATA BSS ==> [0000100000 - 0000cec520]
    [ 0.000000] #4 [0000ced000 - 0000cf2000] INIT_PG_TABLE ==> [0000ced000 - 0000cf2000]
    [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
    [ 0.000000] #7 [0000008000 - 0000011000] BOOTMAP ==> [0000008000 - 0000011000]
    [ 0.000000] Scan SMP from b0000000 for 1024 bytes.
    [ 0.000000] Scan SMP from b009fc00 for 1024 bytes.
    [ 0.000000] Scan SMP from b00f0000 for 65536 bytes.
    [ 0.000000] found SMP MP-table at [b00f68e0] 000f68e0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000000 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x00048000
    [ 0.000000] HighMem 0x00048000 -> 0x0007f6e0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000000 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007f6e0
    [ 0.000000] On node 0 totalpages: 521855
    [ 0.000000] free_area_init_node: node 0, pgdat b088e820, node_mem_map b1000000
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3943 pages, LIFO batch:0
    [ 0.000000] Normal zone: 3976 pages used for memmap
    [ 0.000000] Normal zone: 286840 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 3105 pages used for memmap
    [ 0.000000] HighMem zone: 223935 pages, LIFO batch:31
    [ 0.000000] Movable zone: 0 pages used for memmap
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] Bus #0 is ISA
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] mapped APIC to ffffb000 (fee00000)
    [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
    [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
    [ 0.000000] PERCPU: Allocating 323600 bytes of per cpu data
    [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514718
    [ 0.000000] Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 netconsole=4444@10.0.1.15/eth0,4444@10.0.1.16/00:19:d1:01:f5:55 no_hz=off nolapic_timer hpet=disable idle=poll notsc
    [ 0.000000] kernel profiling enabled (shift: 0)
    [ 0.000000] debug: sysrq always enabled.
    [ 0.000000] notsc: Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely.
    [ 0.000000] Enabling fast FPU save and restore... done.
    [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
    [ 0.000000] Initializing CPU#0
    [ 0.000000] CPU 0 irqstacks, hard=b09c3000 soft=b09bb000
    [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] TSC calibrated against PM_TIMER
    [ 0.000000] Detected 1828.742 MHz processor.
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
    [ 0.000000] ... MAX_LOCK_DEPTH: 48
    [ 0.000000] ... MAX_LOCKDEP_KEYS: 2048
    [ 0.000000] ... CLASSHASH_SIZE: 1024
    [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 8192
    [ 0.000000] ... MAX_LOCKDEP_CHAINS: 16384
    [ 0.000000] ... CHAINHASH_SIZE: 8192
    [ 0.000000] memory used by lock dependency info: 1088 kB
    [ 0.000000] per task-struct memory footprint: 2688 bytes
    [ 0.000000] ------------------------
    [ 0.000000] | Locking API testsuite:
    [ 0.000000] ----------------------------------------------------------------------------
    [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
    [ 0.000000] --------------------------------------------------------------------------
    [ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed|
    [ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
    [ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
    [ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
    [ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
    [ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
    [ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
    [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
    [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
    [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
    [ 0.000000] --------------------------------------------------------------------------
    [ 0.000000] recursive read-lock: | ok | |failed|
    [ 0.000000] recursive read-lock #2: | ok | |failed|
    [ 0.000000] mixed read-write-lock: |failed| |failed|
    [ 0.000000] mixed write-read-lock: |failed| |failed|
    [ 0.000000] --------------------------------------------------------------------------
    [ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok |
    [ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok |
    [ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok |
    [ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok |
    [ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok |
    [ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok |
    [ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok |
    [ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok |
    [ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok |
    [ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok |
    [ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok |
    [ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok |
    [ 0.000000] hard-irq lock-inversion/123:failed|failed| ok |
    [ 0.000000] soft-irq lock-inversion/123:failed|failed| ok |
    [ 0.000000] hard-irq lock-inversion/132:failed|failed| ok |
    [ 0.000000] soft-irq lock-inversion/132:failed|failed| ok |
    [ 0.000000] hard-irq lock-inversion/213:failed|failed| ok |
    [ 0.000000] soft-irq lock-inversion/213:failed|failed| ok |
    [ 0.000000] hard-irq lock-inversion/231:failed|failed| ok |
    [ 0.000000] soft-irq lock-inversion/231:failed|failed| ok |
    [ 0.000000] hard-irq lock-inversion/312:failed|failed| ok |
    [ 0.000000] soft-irq lock-inversion/312:failed|failed| ok |
    [ 0.000000] hard-irq lock-inversion/321:failed|failed| ok |
    [ 0.000000] soft-irq lock-inversion/321:failed|failed| ok |
    [ 0.000000] hard-irq read-recursion/123: ok |
    [ 0.000000] soft-irq read-recursion/123: ok |
    [ 0.000000] hard-irq read-recursion/132: ok |
    [ 0.000000] soft-irq read-recursion/132: ok |
    [ 0.000000] hard-irq read-recursion/213: ok |
    [ 0.000000] soft-irq read-recursion/213: ok |
    [ 0.000000] hard-irq read-recursion/231: ok |
    [ 0.000000] soft-irq read-recursion/231: ok |
    [ 0.000000] hard-irq read-recursion/312: ok |
    [ 0.000000] soft-irq read-recursion/312: ok |
    [ 0.000000] hard-irq read-recursion/321: ok |
    [ 0.000000] soft-irq read-recursion/321: ok |
    [ 0.000000] --------------------------------------------------------
    [ 0.000000] 133 out of 218 testcases failed, as expected. |
    [ 0.000000] ----------------------------------------------------
    [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
    [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Memory: 2021684k/2087808k available (5436k kernel code, 64940k reserved, 2813k data, 652k init, 908160k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xffee1000 - 0xfffff000 (1144 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    [ 0.000000] lowmem : 0xb0000000 - 0xf8000000 (1152 MB)
    [ 0.000000] .init : 0xb0915000 - 0xb09b8000 ( 652 kB)
    [ 0.000000] .data : 0xb064f021 - 0xb090e534 (2813 kB)
    [ 0.000000] .text : 0xb0100000 - 0xb064f021 (5436 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] CPA: page pool initialized 1 of 1 pages preallocated
    [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3657.48 BogoMIPS (lpj=1828742)
    [ 0.001000] Security Framework initialized
    [ 0.001000] Mount-cache hash table entries: 512
    [ 0.002000] Initializing cgroup subsys debug
    [ 0.002000] Initializing cgroup subsys ns
    [ 0.002000] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.002000] CPU: L2 cache: 2048K
    [ 0.002000] CPU: Physical Processor ID: 0
    [ 0.002000] CPU: Processor Core ID: 0
    [ 0.002000] Intel machine check architecture supported.
    [ 0.002000] Intel machine check reporting enabled on CPU#0.
    [ 0.002000] Checking 'hlt' instruction... OK.
    [ 0.009000] ACPI: Core revision 20080609
    [ 0.034000] Parsing all Control Methods:
    [ 0.036000] Table [DSDT](id 0001) - 1587 Objects with 76 Devices 433 Methods 26 Regions
    [ 0.037000] Parsing all Control Methods:
    [ 0.039000] Table [SSDT](id 0002) - 1 Objects with 0 Devices 1 Methods 0 Regions
    [ 0.039000] Parsing all Control Methods:
    [ 0.041000] Table [SSDT](id 0003) - 14 Objects with 0 Devices 5 Methods 0 Regions
    [ 0.042000] Parsing all Control Methods:
    [ 0.044000] Table [SSDT](id 0004) - 14 Objects with 1 Devices 2 Methods 0 Regions
    [ 0.044000] tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired
    [ 0.045000] evxfevnt-0091 [00] enable : Transition to ACPI mode successful
    [ 0.046000] enabled ExtINT on CPU#0
    [ 0.046000] ESR value before enabling vector: 0x00000040 after: 0x00000000
    [ 0.046000] ENABLING IO-APIC IRQs
    [ 0.046000] init IO_APIC IRQs
    [ 0.046000] IO-APIC (apicid-pin) 1-0 not connected.
    [ 0.047000] IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
    [ 0.047000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059000] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
    [ 0.060000] ++++++++++++++++++++=_---CPU UP 1
    [ 0.060000] lockdep: fixing up alternatives.
    [ 0.060000] CPU 1 irqstacks, hard=b09c4000 soft=b09bc000
    [ 0.060000] Booting processor 1/1 ip 6000
    [ 0.060000] Setting warm reset code and vector.
    [ 0.060000] 1.
    [ 0.061000] 2.
    [ 0.061000] 3.
    [ 0.061000] Asserting INIT.
    [ 0.061000] Waiting for send to finish...
    [ 0.072000] Deasserting INIT.
    [ 0.073000] Waiting for send to finish...
    [ 0.073000] #startup loops: 2.
    [ 0.073000] Sending STARTUP #1.
    [ 0.073000] After apic_write.
    [ 0.073000] Startup point 1.
    [ 0.073000] Waiting for send to finish...
    [ 0.073000] Initializing CPU#1
    [ 0.073000] CPU#1 (phys ID: 1) waiting for CALLOUT
    [ 0.074000] Sending STARTUP #2.
    [ 0.074000] After apic_write.
    [ 0.074000] Startup point 1.
    [ 0.074000] Waiting for send to finish...
    [ 0.075000] After Startup.
    [ 0.075000] Before Callout 1.
    [ 0.075000] After Callout 1.
    [ 0.075000] CALLIN, before setup_local_APIC().
    [ 0.075000] masked ExtINT on CPU#1
    [ 0.075000] Calibrating delay loop... <6>3186.68 BogoMIPS (lpj=1593344)
    [ 0.099000] Stack at about f7c7afac
    [ 0.099000] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.099000] CPU: L2 cache: 2048K
    [ 0.099000] CPU: Physical Processor ID: 0
    [ 0.099000] CPU: Processor Core ID: 1
    [ 0.099000] Intel machine check architecture supported.
    [ 0.099000] Intel machine check reporting enabled on CPU#1.
    [ 0.099000] OK.
    [ 0.100000] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
    [ 0.100000] CPU has booted.
    [ 0.100000] checking TSC synchronization [CPU#0 -> CPU#1]:
    [ 0.100000] Measured 580415 cycles TSC warp between CPUs, turning off TSC clock.
    [ 0.100000] Marking TSC unstable due to check_tsc_sync_source failed
    [ 0.101000] Brought up 2 CPUs
    [ 0.101000] Boot done.
    [ 0.101000] Before bogomips.
    [ 0.101000] Total of 2 processors activated (6844.17 BogoMIPS).
    [ 0.101000] Before bogocount - setting activated=1.
    [ 0.102000] calling net_ns_init+0x0/0x10a
    [ 0.102000] net_namespace: 728 bytes
    [ 0.102000] initcall net_ns_init+0x0/0x10a returned 0 after 0 msecs
    [ 0.102000] calling reboot_init+0x0/0xc
    [ 0.102000] initcall reboot_init+0x0/0xc returned 0 after 0 msecs
    [ 0.102000] calling print_banner+0x0/0xd
    [ 0.103000] Booting paravirtualized kernel on bare hardware
    [ 0.103000] initcall print_banner+0x0/0xd returned 0 after 0 msecs
    [ 0.103000] calling sysctl_init+0x0/0x18
    [ 0.103000] initcall sysctl_init+0x0/0x18 returned 0 after 0 msecs
    [ 0.103000] calling ksysfs_init+0x0/0x9b
    [ 0.103000] initcall ksysfs_init+0x0/0x9b returned 0 after 0 msecs
    [ 0.103000] calling init_jiffies_clocksource+0x0/0x14
    [ 0.103000] initcall init_jiffies_clocksource+0x0/0x14 returned 0 after 0 msecs
    [ 0.104000] calling pm_init+0x0/0x32
    [ 0.105000] initcall pm_init+0x0/0x32 returned 0 after 0 msecs
    [ 0.105000] calling filelock_init+0x0/0x2c
    [ 0.105000] initcall filelock_init+0x0/0x2c returned 0 after 0 msecs
    [ 0.105000] calling init_aout_binfmt+0x0/0x14
    [ 0.105000] initcall init_aout_binfmt+0x0/0x14 returned 0 after 0 msecs
    [ 0.105000] calling init_script_binfmt+0x0/0x14
    [ 0.105000] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 msecs
    [ 0.105000] calling init_elf_binfmt+0x0/0x14
    [ 0.105000] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 msecs
    [ 0.106000] calling debugfs_init+0x0/0x46
    [ 0.106000] initcall debugfs_init+0x0/0x46 returned 0 after 0 msecs
    [ 0.106000] calling securityfs_init+0x0/0x46
    [ 0.106000] initcall securityfs_init+0x0/0x46 returned 0 after 0 msecs
    [ 0.106000] calling random32_init+0x0/0x3f
    [ 0.106000] initcall random32_init+0x0/0x3f returned 0 after 0 msecs
    [ 0.106000] calling sock_init+0x0/0x56
    [ 0.106000] initcall sock_init+0x0/0x56 returned 0 after 0 msecs
    [ 0.107000] calling netpoll_init+0x0/0x3e
    [ 0.107000] initcall netpoll_init+0x0/0x3e returned 0 after 0 msecs
    [ 0.107000] calling netlink_proto_init+0x0/0x10c
    [ 0.107000] NET: Registered protocol family 16
    [ 0.107000] initcall netlink_proto_init+0x0/0x10c returned 0 after 0 msecs
    [ 0.107000] calling bdi_class_init+0x0/0x38
    [ 0.107000] initcall bdi_class_init+0x0/0x38 returned 0 after 0 msecs
    [ 0.108000] calling kobject_uevent_init+0x0/0x3f
    [ 0.108000] initcall kobject_uevent_init+0x0/0x3f returned 0 after 0 msecs
    [ 0.108000] calling pcibus_class_init+0x0/0x14
    [ 0.108000] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.108000] calling pci_driver_init+0x0/0x14
    [ 0.108000] initcall pci_driver_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.108000] calling backlight_class_init+0x0/0x42
    [ 0.109000] initcall backlight_class_init+0x0/0x42 returned 0 after 0 msecs
    [ 0.109000] calling video_output_class_init+0x0/0x14
    [ 0.109000] initcall video_output_class_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.109000] calling dock_init+0x0/0x58
    [ 0.110000] ACPI: ACPI Dock Station Driver
    [ 0.110000] initcall dock_init+0x0/0x58 returned 0 after 0 msecs
    [ 0.111000] calling tty_class_init+0x0/0x2c
    [ 0.111000] initcall tty_class_init+0x0/0x2c returned 0 after 0 msecs
    [ 0.111000] calling vtconsole_class_init+0x0/0x9f
    [ 0.111000] initcall vtconsole_class_init+0x0/0x9f returned 0 after 0 msecs
    [ 0.111000] calling enable_pci_io_ecs+0x0/0x30
    [ 0.111000] initcall enable_pci_io_ecs+0x0/0x30 returned 0 after 0 msecs
    [ 0.112000] calling rdc_board_setup+0x0/0x1e
    [ 0.112000] initcall rdc_board_setup+0x0/0x1e returned 0 after 0 msecs
    [ 0.112000] calling arch_kdebugfs_init+0x0/0x277
    [ 0.112000] initcall arch_kdebugfs_init+0x0/0x277 returned 0 after 0 msecs
    [ 0.112000] calling init_pit_clocksource+0x0/0x8b
    [ 0.112000] initcall init_pit_clocksource+0x0/0x8b returned 0 after 0 msecs
    [ 0.112000] calling mtrr_if_init+0x0/0x5b
    [ 0.113000] initcall mtrr_if_init+0x0/0x5b returned 0 after 0 msecs
    [ 0.113000] calling acpi_pci_init+0x0/0x3d
    [ 0.113000] ACPI: bus type pci registered
    [ 0.113000] initcall acpi_pci_init+0x0/0x3d returned 0 after 0 msecs
    [ 0.113000] calling init_acpi_device_notify+0x0/0x48
    [ 0.113000] initcall init_acpi_device_notify+0x0/0x48 returned 0 after 0 msecs
    [ 0.113000] calling pci_arch_init+0x0/0x38
    [ 0.114000] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24
    [ 0.114000] initcall pci_arch_init+0x0/0x38 returned 0 after 0 msecs
    [ 0.114000] calling topology_init+0x0/0x2d
    [ 0.114000] initcall topology_init+0x0/0x2d returned 0 after 0 msecs
    [ 0.114000] calling mtrr_init_finialize+0x0/0x3a
    [ 0.114000] initcall mtrr_init_finialize+0x0/0x3a returned 0 after 0 msecs
    [ 0.114000] calling param_sysfs_init+0x0/0x159
    [ 0.126000] initcall param_sysfs_init+0x0/0x159 returned 0 after 10 msecs
    [ 0.126000] calling pm_sysrq_init+0x0/0x1b
    [ 0.126000] initcall pm_sysrq_init+0x0/0x1b returned 0 after 0 msecs
    [ 0.126000] calling readahead_init+0x0/0x34
    [ 0.127000] initcall readahead_init+0x0/0x34 returned 0 after 0 msecs
    [ 0.127000] calling init_bio+0x0/0xb0
    [ 0.127000] initcall init_bio+0x0/0xb0 returned 0 after 0 msecs
    [ 0.127000] calling integrity_init+0x0/0x39
    [ 0.127000] initcall integrity_init+0x0/0x39 returned 0 after 0 msecs
    [ 0.127000] calling blk_settings_init+0x0/0x22
    [ 0.127000] initcall blk_settings_init+0x0/0x22 returned 0 after 0 msecs
    [ 0.128000] calling blk_ioc_init+0x0/0x29
    [ 0.128000] initcall blk_ioc_init+0x0/0x29 returned 0 after 0 msecs
    [ 0.128000] calling genhd_device_init+0x0/0x37
    [ 0.128000] initcall genhd_device_init+0x0/0x37 returned 0 after 0 msecs
    [ 0.128000] calling blk_dev_integrity_init+0x0/0x29
    [ 0.128000] initcall blk_dev_integrity_init+0x0/0x29 returned 0 after 0 msecs
    [ 0.128000] calling pci_slot_init+0x0/0x40
    [ 0.129000] initcall pci_slot_init+0x0/0x40 returned 0 after 0 msecs
    [ 0.129000] calling fbmem_init+0x0/0x78
    [ 0.129000] initcall fbmem_init+0x0/0x78 returned 0 after 0 msecs
    [ 0.129000] calling acpi_init+0x0/0x21b
    [ 0.138000] evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
    [ 0.138000] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.148000] Completing Region/Field/Buffer/Package initialization:................................... .................................................. .................................................. .................................................. .................................................. ..............................................
    [ 0.168000] Initialized 26/26 Regions 142/142 Fields 64/64 Buffers 49/49 Packages (1625 nodes)
    [ 0.168000] Initializing Device/Processor/Thermal objects by executing _INI methods:...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode
    [ 0.179000] ....
    [ 0.182000] Executed 7 _INI methods requiring 2 _STA executions (examined 83 objects)
    [ 0.183000] evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block
    [ 0.183000] ACPI: Interpreter enabled
    [ 0.183000] ACPI: (supports S0 S3 S5)
    [ 0.183000] ACPI: Using IOAPIC for interrupt routing
    [ 0.184000] initcall acpi_init+0x0/0x21b returned 0 after 52 msecs
    [ 0.184000] calling acpi_scan_init+0x0/0xf2
    [ 0.214000] initcall acpi_scan_init+0x0/0xf2 returned 0 after 28 msecs
    [ 0.214000] calling acpi_ec_init+0x0/0x5a
    [ 0.214000] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.214000] ACPI: EC: driver started in interrupt mode
    [ 0.215000] initcall acpi_ec_init+0x0/0x5a returned 0 after 0 msecs
    [ 0.215000] calling acpi_pci_root_init+0x0/0x2a
    [ 0.215000] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 0.215000] PCI: 0000:00:02.0 reg 10 32bit mmio: [ee100000, ee17ffff]
    [ 0.216000] PCI: 0000:00:02.0 reg 14 io port: [1800, 1807]
    [ 0.216000] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
    [ 0.216000] PCI: 0000:00:02.0 reg 1c 32bit mmio: [ee200000, ee23ffff]
    [ 0.216000] PCI: 0000:00:02.1 reg 10 32bit mmio: [ee180000, ee1fffff]
    [ 0.216000] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.216000] pci 0000:00:1b.0: PME# disabled
    [ 0.217000] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.217000] pci 0000:00:1c.0: PME# disabled
    [ 0.217000] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.217000] pci 0000:00:1c.1: PME# disabled
    [ 0.217000] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.217000] pci 0000:00:1c.2: PME# disabled
    [ 0.218000] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.218000] pci 0000:00:1c.3: PME# disabled
    [ 0.218000] PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
    [ 0.218000] PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
    [ 0.218000] PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
    [ 0.219000] PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f]
    [ 0.219000] PCI: 0000:00:1d.7 reg 10 32bit mmio: [ee444000, ee4443ff]
    [ 0.219000] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.219000] pci 0000:00:1d.7: PME# disabled
    [ 0.219000] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    [ 0.220000] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    [ 0.220000] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
    [ 0.220000] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
    [ 0.220000] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
    [ 0.220000] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
    [ 0.220000] PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
    [ 0.220000] PCI: 0000:00:1f.2 reg 10 io port: [18d0, 18d7]
    [ 0.220000] PCI: 0000:00:1f.2 reg 14 io port: [18c4, 18c7]
    [ 0.221000] PCI: 0000:00:1f.2 reg 18 io port: [18c8, 18cf]
    [ 0.221000] PCI: 0000:00:1f.2 reg 1c io port: [18c0, 18c3]
    [ 0.221000] PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf]
    [ 0.221000] PCI: 0000:00:1f.2 reg 24 32bit mmio: [ee444400, ee4447ff]
    [ 0.221000] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.221000] pci 0000:00:1f.2: PME# disabled
    [ 0.221000] PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff]
    [ 0.222000] PCI: 0000:02:00.0 reg 10 32bit mmio: [ee000000, ee01ffff]
    [ 0.222000] PCI: 0000:02:00.0 reg 18 io port: [2000, 201f]
    [ 0.222000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.222000] pci 0000:02:00.0: PME# disabled
    [ 0.222000] PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
    [ 0.223000] PCI: bridge 0000:00:1c.0 32bit mmio: [ee000000, ee0fffff]
    [ 0.223000] PCI: 0000:03:00.0 reg 10 32bit mmio: [edf00000, edf00fff]
    [ 0.223000] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.224000] pci 0000:03:00.0: PME# disabled
    [ 0.224000] PCI: bridge 0000:00:1c.1 io port: [3000, 4fff]
    [ 0.224000] PCI: bridge 0000:00:1c.1 32bit mmio: [ec000000, edffffff]
    [ 0.224000] PCI: bridge 0000:00:1c.1 64bit mmio pref: [e4000000, e40fffff]
    [ 0.224000] PCI: bridge 0000:00:1c.2 io port: [5000, 6fff]
    [ 0.224000] PCI: bridge 0000:00:1c.2 32bit mmio: [e8000000, e9ffffff]
    [ 0.224000] PCI: bridge 0000:00:1c.2 64bit mmio pref: [e4100000, e41fffff]
    [ 0.224000] PCI: bridge 0000:00:1c.3 io port: [7000, 8fff]
    [ 0.225000] PCI: bridge 0000:00:1c.3 32bit mmio: [ea000000, ebffffff]
    [ 0.225000] PCI: bridge 0000:00:1c.3 64bit mmio pref: [e4200000, e42fffff]
    [ 0.225000] PCI: 0000:15:00.0 reg 10 32bit mmio: [e4300000, e4300fff]
    [ 0.225000] pci 0000:15:00.0: supports D1
    [ 0.225000] pci 0000:15:00.0: supports D2
    [ 0.225000] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.226000] pci 0000:15:00.0: PME# disabled
    [ 0.226000] pci 0000:00:1e.0: transparent bridge
    [ 0.226000] PCI: bridge 0000:00:1e.0 io port: [9000, cfff]
    [ 0.227000] PCI: bridge 0000:00:1e.0 32bit mmio: [e4300000, e7ffffff]
    [ 0.227000] PCI: bridge 0000:00:1e.0 64bit mmio pref: [e0000000, e3ffffff]
    [ 0.227000] bus 00 -> node 0
    [ 0.227000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.227000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    [ 0.228000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.228000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.229000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    [ 0.229000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    [ 0.241000] initcall acpi_pci_root_init+0x0/0x2a returned 0 after 24 msecs
    [ 0.242000] calling acpi_pci_link_init+0x0/0x48
    [ 0.242000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.243000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.244000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.245000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.246000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.246000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.247000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.248000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.249000] initcall acpi_pci_link_init+0x0/0x48 returned 0 after 6 msecs
    [ 0.249000] calling acpi_power_init+0x0/0x6e
    [ 0.250000] ACPI: Power Resource [PUBS] (on)
    [ 0.250000] initcall acpi_power_init+0x0/0x6e returned 0 after 0 msecs
    [ 0.250000] calling acpi_system_init+0x0/0x209
    [ 0.251000] initcall acpi_system_init+0x0/0x209 returned 0 after 0 msecs
    [ 0.251000] calling acpi_debug_init+0x0/0x9e
    [ 0.251000] initcall acpi_debug_init+0x0/0x9e returned 0 after 0 msecs
    [ 0.251000] calling acpi_cm_sbs_init+0x0/0xc
    [ 0.251000] initcall acpi_cm_sbs_init+0x0/0xc returned 0 after 0 msecs
    [ 0.251000] calling pnp_init+0x0/0x1e
    [ 0.251000] Linux Plug and Play Support v0.97 (c) Adam Belay
    [ 0.252000] initcall pnp_init+0x0/0x1e returned 0 after 0 msecs
    [ 0.252000] calling pnpacpi_init+0x0/0x80
    [ 0.252000] pnp: PnP ACPI init
    [ 0.252000] ACPI: bus type pnp registered
    [ 0.262000] pnp: PnP ACPI: found 11 devices
    [ 0.262000] ACPI: ACPI bus type pnp unregistered
    [ 0.262000] initcall pnpacpi_init+0x0/0x80 returned 0 after 9 msecs
    [ 0.262000] calling pnpbios_init+0x0/0x313
    [ 0.262000] PnPBIOS: Disabled by ACPI PNP
    [ 0.262000] initcall pnpbios_init+0x0/0x313 returned -19 after 0 msecs
    [ 0.262000] calling misc_init+0x0/0x84
    [ 0.262000] initcall misc_init+0x0/0x84 returned 0 after 0 msecs
    [ 0.263000] calling tifm_init+0x0/0x72
    [ 0.263000] initcall tifm_init+0x0/0x72 returned 0 after 0 msecs
    [ 0.263000] calling phy_init+0x0/0x2e
    [ 0.263000] initcall phy_init+0x0/0x2e returned 0 after 0 msecs
    [ 0.263000] calling init_scsi+0x0/0x7e
    [ 0.264000] SCSI subsystem initialized
    [ 0.264000] initcall init_scsi+0x0/0x7e returned 0 after 0 msecs
    [ 0.264000] calling ata_init+0x0/0x2a9
    [ 0.264000] libata version 3.00 loaded.
    [ 0.265000] initcall ata_init+0x0/0x2a9 returned 0 after 0 msecs
    [ 0.265000] calling usb_init+0x0/0x112
    [ 0.265000] usbcore: registered new interface driver usbfs
    [ 0.265000] usbcore: registered new interface driver hub
    [ 0.265000] usbcore: registered new device driver usb
    [ 0.266000] initcall usb_init+0x0/0x112 returned 0 after 0 msecs
    [ 0.266000] calling serio_init+0x0/0x87
    [ 0.266000] initcall serio_init+0x0/0x87 returned 0 after 0 msecs
    [ 0.266000] calling gameport_init+0x0/0x87
    [ 0.266000] initcall gameport_init+0x0/0x87 returned 0 after 0 msecs
    [ 0.266000] calling input_init+0x0/0xe2
    [ 0.267000] initcall input_init+0x0/0xe2 returned 0 after 0 msecs
    [ 0.267000] calling i2c_init+0x0/0x54
    [ 0.267000] initcall i2c_init+0x0/0x54 returned 0 after 0 msecs
    [ 0.267000] calling power_supply_class_init+0x0/0x2e
    [ 0.267000] initcall power_supply_class_init+0x0/0x2e returned 0 after 0 msecs
    [ 0.268000] calling mmc_init+0x0/0x70
    [ 0.268000] initcall mmc_init+0x0/0x70 returned 0 after 0 msecs
    [ 0.268000] calling leds_init+0x0/0x2c
    [ 0.268000] initcall leds_init+0x0/0x2c returned 0 after 0 msecs
    [ 0.268000] calling pci_subsys_init+0x0/0xeb
    [ 0.268000] PCI: Using ACPI for IRQ routing
    [ 0.269000] number of MP IRQ sources: 15.
    [ 0.269000] number of IO-APIC #1 registers: 24.
    [ 0.269000] testing the IO APIC.......................
    [ 0.269000] IO APIC #1......
    [ 0.269000] .... register #00: 02000000
    [ 0.269000] ....... : physical APIC id: 02
    [ 0.269000] ....... : Delivery Type: 0
    [ 0.269000] ....... : LTS : 0
    [ 0.269000] .... register #01: 00170020
    [ 0.269000] ....... : max redirection entries: 0017
    [ 0.269000] ....... : PRQ implemented: 0
    [ 0.270000] ....... : IO APIC version: 0020
    [ 0.270000] .... IRQ redirection table:
    [ 0.270000] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    [ 0.270000] 00 000 00 1 0 0 0 0 0 0 00
    [ 0.270000] 01 003 03 1 0 0 0 0 1 1 39
    [ 0.270000] 02 003 03 0 0 0 0 0 1 1 31
    [ 0.270000] 03 003 03 1 0 0 0 0 1 1 41
    [ 0.270000] 04 003 03 0 0 0 0 0 1 1 49
    [ 0.271000] 05 003 03 0 0 0 0 0 1 1 51
    [ 0.271000] 06 003 03 0 0 0 0 0 1 1 59
    [ 0.271000] 07 003 03 0 0 0 0 0 1 1 61
    [ 0.271000] 08 003 03 1 0 0 0 0 1 1 69
    [ 0.271000] 09 003 03 0 1 0 0 0 1 1 71
    [ 0.271000] 0a 003 03 0 0 0 0 0 1 1 79
    [ 0.271000] 0b 003 03 0 0 0 0 0 1 1 81
    [ 0.271000] 0c 003 03 1 0 0 0 0 1 1 89
    [ 0.272000] 0d 003 03 1 0 0 0 0 1 1 91
    [ 0.272000] 0e 003 03 0 0 0 0 0 1 1 99
    [ 0.272000] 0f 003 03 0 0 0 0 0 1 1 A1
    [ 0.272000] 10 000 00 1 0 0 0 0 0 0 00
    [ 0.272000] 11 000 00 1 0 0 0 0 0 0 00
    [ 0.272000] 12 000 00 1 0 0 0 0 0 0 00
    [ 0.272000] 13 000 00 1 0 0 0 0 0 0 00
    [ 0.273000] 14 000 00 1 0 0 0 0 0 0 00
    [ 0.273000] 15 000 00 1 0 0 0 0 0 0 00
    [ 0.273000] 16 000 00 1 0 0 0 0 0 0 00
    [ 0.273000] 17 000 00 1 0 0 0 0 0 0 00
    [ 0.273000] IRQ to pin mappings:
    [ 0.273000] IRQ0 -> 0:2
    [ 0.273000] IRQ1 -> 0:1
    [ 0.274000] IRQ3 -> 0:3
    [ 0.274000] IRQ4 -> 0:4
    [ 0.274000] IRQ5 -> 0:5
    [ 0.274000] IRQ6 -> 0:6
    [ 0.274000] IRQ7 -> 0:7
    [ 0.274000] IRQ8 -> 0:8
    [ 0.275000] IRQ9 -> 0:9
    [ 0.275000] IRQ10 -> 0:10
    [ 0.275000] IRQ11 -> 0:11
    [ 0.275000] IRQ12 -> 0:12
    [ 0.275000] IRQ13 -> 0:13
    [ 0.275000] IRQ14 -> 0:14
    [ 0.276000] IRQ15 -> 0:15
    [ 0.276000] .................................... done.
    [ 0.276000] initcall pci_subsys_init+0x0/0xeb returned 0 after 7 msecs
    [ 0.276000] calling proto_init+0x0/0x2c
    [ 0.277000] initcall proto_init+0x0/0x2c returned 0 after 0 msecs
    [ 0.277000] calling net_dev_init+0x0/0x134
    [ 0.277000] initcall net_dev_init+0x0/0x134 returned 0 after 0 msecs
    [ 0.277000] calling neigh_init+0x0/0x6b
    [ 0.277000] initcall neigh_init+0x0/0x6b returned 0 after 0 msecs
    [ 0.277000] calling fib_rules_init+0x0/0x9e
    [ 0.277000] initcall fib_rules_init+0x0/0x9e returned 0 after 0 msecs
    [ 0.277000] calling genl_init+0x0/0xb5
    [ 0.278000] initcall genl_init+0x0/0xb5 returned 0 after 0 msecs
    [ 0.278000] calling cipso_v4_init+0x0/0x72
    [ 0.278000] initcall cipso_v4_init+0x0/0x72 returned 0 after 0 msecs
    [ 0.278000] calling wanrouter_init+0x0/0x47
    [ 0.278000] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
    [ 0.278000] initcall wanrouter_init+0x0/0x47 returned 0 after 0 msecs
    [ 0.278000] calling irda_init+0x0/0x8d
    [ 0.278000] NET: Registered protocol family 23
    [ 0.279000] initcall irda_init+0x0/0x8d returned 0 after 0 msecs
    [ 0.279000] calling atm_init+0x0/0xa1
    [ 0.279000] NET: Registered protocol family 8
    [ 0.279000] NET: Registered protocol family 20
    [ 0.279000] initcall atm_init+0x0/0xa1 returned 0 after 0 msecs
    [ 0.279000] calling wireless_nlevent_init+0x0/0x3e
    [ 0.279000] initcall wireless_nlevent_init+0x0/0x3e returned 0 after 0 msecs
    [ 0.279000] calling netlbl_init+0x0/0x72
    [ 0.280000] NetLabel: Initializing
    [ 0.280000] NetLabel: domain hash size = 128
    [ 0.280000] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.280000] NetLabel: unlabeled traffic allowed by default
    [ 0.280000] initcall netlbl_init+0x0/0x72 returned 0 after 0 msecs
    [ 0.280000] calling sysctl_init+0x0/0x28
    [ 0.280000] initcall sysctl_init+0x0/0x28 returned 0 after 0 msecs
    [ 0.280000] calling pci_iommu_init+0x0/0x11
    [ 0.280000] initcall pci_iommu_init+0x0/0x11 returned 0 after 0 msecs
    [ 0.281000] calling init_kmmio+0x0/0x28
    [ 0.281000] initcall init_kmmio+0x0/0x28 returned 0 after 0 msecs
    [ 0.281000] calling clocksource_done_booting+0x0/0x16
    [ 0.281000] initcall clocksource_done_booting+0x0/0x16 returned 0 after 0 msecs
    [ 0.281000] calling tracer_alloc_buffers+0x0/0x47b
    [ 0.283000] tracer: 772 pages allocated for 65536 entries of 48 bytes
    [ 0.283000] actual entries 65620
    [ 0.283000] initcall tracer_alloc_buffers+0x0/0x47b returned 0 after 1 msecs
    [ 0.283000] calling init_pipe_fs+0x0/0x46
    [ 0.283000] initcall init_pipe_fs+0x0/0x46 returned 0 after 0 msecs
    [ 0.284000] calling init_mnt_writers+0x0/0x66
    [ 0.284000] initcall init_mnt_writers+0x0/0x66 returned 0 after 0 msecs
    [ 0.285000] calling eventpoll_init+0x0/0x82
    [ 0.285000] initcall eventpoll_init+0x0/0x82 returned 0 after 0 msecs
    [ 0.285000] calling anon_inode_init+0x0/0xe4
    [ 0.285000] initcall anon_inode_init+0x0/0xe4 returned 0 after 0 msecs
    [ 0.285000] calling acpi_event_init+0x0/0x74
    [ 0.285000] initcall acpi_event_init+0x0/0x74 returned 0 after 0 msecs
    [ 0.285000] calling pnp_system_init+0x0/0x14
    [ 0.286000] system 00:00: iomem range 0x0-0x9ffff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
    [ 0.286000] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    [ 0.286000] system 00:00: iomem range 0xec000-0xeffff could not be reserved
    [ 0.287000] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    [ 0.287000] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
    [ 0.287000] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
    [ 0.287000] system 00:02: ioport range 0x164e-0x164f has been reserved
    [ 0.287000] system 00:02: ioport range 0x1000-0x107f has been reserved
    [ 0.287000] system 00:02: ioport range 0x1180-0x11bf has been reserved
    [ 0.287000] system 00:02: ioport range 0x800-0x80f has been reserved
    [ 0.287000] system 00:02: ioport range 0x15e0-0x15ef has been reserved
    [ 0.287000] system 00:02: ioport range 0x1600-0x165f could not be reserved
    [ 0.288000] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
    [ 0.288000] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    [ 0.288000] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
    [ 0.288000] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
    [ 0.288000] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
    [ 0.288000] initcall pnp_system_init+0x0/0x14 returned 0 after 2 msecs
    [ 0.289000] calling chr_dev_init+0x0/0x8b
    [ 0.289000] initcall chr_dev_init+0x0/0x8b returned 0 after 0 msecs
    [ 0.290000] calling firmware_class_init+0x0/0x61
    [ 0.290000] initcall firmware_class_init+0x0/0x61 returned 0 after 0 msecs
    [ 0.290000] calling loopback_init+0x0/0x14
    [ 0.290000] initcall loopback_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.290000] calling init_acpi_pm_clocksource+0x0/0x150
    [ 0.321000] PM-Timer running at invalid rate: 87% of normal - aborting.
    [ 0.321000] initcall init_acpi_pm_clocksource+0x0/0x150 returned -19 after 28 msecs
    [ 0.321000] calling pcibios_assign_resources+0x0/0x96
    [ 0.321000] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    [ 0.321000] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
    [ 0.321000] pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff
    [ 0.321000] pci 0000:00:1c.0: PREFETCH window: disabled
    [ 0.321000] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    [ 0.321000] pci 0000:00:1c.1: IO window: 0x3000-0x4fff
    [ 0.322000] pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff
    [ 0.322000] pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff
    [ 0.322000] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
    [ 0.322000] pci 0000:00:1c.2: IO window: 0x5000-0x6fff
    [ 0.322000] pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff
    [ 0.322000] pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff
    [ 0.322000] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
    [ 0.322000] pci 0000:00:1c.3: IO window: 0x7000-0x8fff
    [ 0.322000] pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff
    [ 0.323000] pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff
    [ 0.323000] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
    [ 0.323000] pci 0000:15:00.0: IO window: 0x009000-0x0090ff
    [ 0.323000] pci 0000:15:00.0: IO window: 0x009400-0x0094ff
    [ 0.323000] pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff
    [ 0.323000] pci 0000:15:00.0: MEM window: 0x88000000-0x8bffffff
    [ 0.323000] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
    [ 0.323000] pci 0000:00:1e.0: IO window: 0x9000-0xcfff
    [ 0.323000] pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff
    [ 0.324000] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff
    [ 0.324000] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 0.324000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
    [ 0.324000] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.324000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
    [ 0.324000] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    [ 0.324000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
    [ 0.324000] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [ 0.324000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
    [ 0.325000] pci 0000:00:1e.0: enabling device (0005 -> 0007)
    [ 0.325000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
    [ 0.325000] vendor=8086 device=2448
    [ 0.325000] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.325000] bus: 00 index 0 io port: [0, ffff]
    [ 0.325000] bus: 00 index 1 mmio: [0, ffffffffffffffff]
    [ 0.325000] bus: 02 index 0 io port: [2000, 2fff]
    [ 0.325000] bus: 02 index 1 mmio: [ee000000, ee0fffff]
    [ 0.325000] bus: 02 index 2 mmio: [0, 0]
    [ 0.325000] bus: 02 index 3 mmio: [0, 0]
    [ 0.326000] bus: 03 index 0 io port: [3000, 4fff]
    [ 0.326000] bus: 03 index 1 mmio: [ec000000, edffffff]
    [ 0.326000] bus: 03 index 2 mmio: [e4000000, e40fffff]
    [ 0.326000] bus: 03 index 3 mmio: [0, 0]
    [ 0.326000] bus: 04 index 0 io port: [5000, 6fff]
    [ 0.326000] bus: 04 index 1 mmio: [e8000000, e9ffffff]
    [ 0.326000] bus: 04 index 2 mmio: [e4100000, e41fffff]
    [ 0.326000] bus: 04 index 3 mmio: [0, 0]
    [ 0.326000] bus: 0c index 0 io port: [7000, 8fff]
    [ 0.326000] bus: 0c index 1 mmio: [ea000000, ebffffff]
    [ 0.326000] bus: 0c index 2 mmio: [e4200000, e42fffff]
    [ 0.327000] bus: 0c index 3 mmio: [0, 0]
    [ 0.327000] bus: 15 index 0 io port: [9000, cfff]
    [ 0.327000] bus: 15 index 1 mmio: [e4300000, e7ffffff]
    [ 0.327000] bus: 15 index 2 mmio: [e0000000, e3ffffff]
    [ 0.327000] bus: 15 index 3 io port: [0, ffff]
    [ 0.327000] bus: 15 index 4 mmio: [0, ffffffffffffffff]
    [ 0.327000] bus: 16 index 0 io port: [9000, 90ff]
    [ 0.327000] bus: 16 index 1 io port: [9400, 94ff]
    [ 0.327000] bus: 16 index 2 mmio: [e0000000, e3ffffff]
    [ 0.327000] bus: 16 index 3 mmio: [88000000, 8bffffff]
    [ 0.327000] initcall pcibios_assign_resources+0x0/0x96 returned 0 after 5 msecs
    [ 0.328000] calling inet_init+0x0/0x376
    [ 0.328000] NET: Registered protocol family 2
    [ 0.328000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.329000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.331000] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
    [ 0.335000] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.336000] TCP reno registered
    [ 0.336000] initcall inet_init+0x0/0x376 returned 0 after 7 msecs
    [ 0.336000] calling af_unix_init+0x0/0x4c
    [ 0.336000] NET: Registered protocol family 1
    [ 0.336000] initcall af_unix_init+0x0/0x4c returned 0 after 0 msecs
    [ 0.336000] calling default_rootfs+0x0/0x68
    [ 0.336000] initcall default_rootfs+0x0/0x68 returned 0 after 0 msecs
    [ 0.337000] calling vmx_init+0x0/0x1d7
    [ 0.337000] initcall vmx_init+0x0/0x1d7 returned 0 after 0 msecs
    [ 0.338000] calling svm_init+0x0/0x1b
    [ 0.338000] kvm: already loaded the other module
    [ 0.338000] initcall svm_init+0x0/0x1b returned -17 after 0 msecs
    [ 0.338000] initcall svm_init+0x0/0x1b returned with error code -17
    [ 0.338000] calling i8259A_init_sysfs+0x0/0x22
    [ 0.338000] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 0 msecs
    [ 0.339000] calling sbf_init+0x0/0xc2
    [ 0.339000] Simple Boot Flag at 0x35 set to 0x1
    [ 0.339000] initcall sbf_init+0x0/0xc2 returned 0 after 0 msecs
    [ 0.339000] calling i8237A_init_sysfs+0x0/0x22
    [ 0.339000] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 0 msecs
    [ 0.339000] calling add_rtc_cmos+0x0/0x1a
    [ 0.339000] initcall add_rtc_cmos+0x0/0x1a returned 0 after 0 msecs
    [ 0.340000] calling cache_sysfs_init+0x0/0x4c
    [ 0.340000] initcall cache_sysfs_init+0x0/0x4c returned 0 after 0 msecs
    [ 0.341000] calling thermal_throttle_init_device+0x0/0x6e
    [ 0.341000] initcall thermal_throttle_init_device+0x0/0x6e returned 0 after 0 msecs
    [ 0.341000] calling msr_init+0x0/0xcb
    [ 0.341000] initcall msr_init+0x0/0xcb returned 0 after 0 msecs
    [ 0.341000] calling microcode_init+0x0/0xa7
    [ 0.341000] IA-32 Microcode Update Driver: v1.14a
    [ 0.342000] initcall microcode_init+0x0/0xa7 returned 0 after 0 msecs
    [ 0.342000] calling init_lapic_sysfs+0x0/0x2d
    [ 0.342000] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 msecs
    [ 0.342000] calling ioapic_init_sysfs+0x0/0x89
    [ 0.343000] initcall ioapic_init_sysfs+0x0/0x89 returned 0 after 0 msecs
    [ 0.343000] calling add_pcspkr+0x0/0x3a
    [ 0.343000] initcall add_pcspkr+0x0/0x3a returned 0 after 0 msecs
    [ 0.343000] calling init+0x0/0x14
    [ 0.343000] initcall init+0x0/0x14 returned 0 after 0 msecs
    [ 0.343000] calling init+0x0/0x14
    [ 0.343000] initcall init+0x0/0x14 returned 0 after 0 msecs
    [ 0.344000] calling create_proc_profile+0x0/0x170
    [ 0.344000] initcall create_proc_profile+0x0/0x170 returned 0 after 0 msecs
    [ 0.344000] calling ioresources_init+0x0/0x36
    [ 0.344000] initcall ioresources_init+0x0/0x36 returned 0 after 0 msecs
    [ 0.344000] calling uid_cache_init+0x0/0x63
    [ 0.344000] initcall uid_cache_init+0x0/0x63 returned 0 after 0 msecs
    [ 0.344000] calling init_posix_timers+0x0/0x81
    [ 0.345000] initcall init_posix_timers+0x0/0x81 returned 0 after 0 msecs
    [ 0.345000] calling init_posix_cpu_timers+0x0/0x95
    [ 0.346000] initcall init_posix_cpu_timers+0x0/0x95 returned 0 after 0 msecs
    [ 0.346000] calling nsproxy_cache_init+0x0/0x2c
    [ 0.346000] initcall nsproxy_cache_init+0x0/0x2c returned 0 after 0 msecs
    [ 0.346000] calling timekeeping_init_device+0x0/0x22
    [ 0.346000] initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 msecs
    [ 0.346000] calling init_clocksource_sysfs+0x0/0x48
    [ 0.347000] initcall init_clocksource_sysfs+0x0/0x48 returned 0 after 0 msecs
    [ 0.347000] calling init_timer_list_procfs+0x0/0x2c
    [ 0.347000] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs
    [ 0.347000] calling lockdep_proc_init+0x0/0x4f
    [ 0.347000] initcall lockdep_proc_init+0x0/0x4f returned 0 after 0 msecs
    [ 0.347000] calling futex_init+0x0/0x74
    [ 0.347000] initcall futex_init+0x0/0x74 returned 0 after 0 msecs
    [ 0.347000] calling proc_dma_init+0x0/0x21
    [ 0.348000] initcall proc_dma_init+0x0/0x21 returned 0 after 0 msecs
    [ 0.348000] calling percpu_modinit+0x0/0x69
    [ 0.348000] initcall percpu_modinit+0x0/0x69 returned 0 after 0 msecs
    [ 0.348000] calling kallsyms_init+0x0/0x24
    [ 0.348000] initcall kallsyms_init+0x0/0x24 returned 0 after 0 msecs
    [ 0.348000] calling init_kprobes+0x0/0x101
    [ 0.353000] Kprobe smoke test started
    [ 0.356000] Kprobe smoke test passed successfully
    [ 0.356000] initcall init_kprobes+0x0/0x101 returned 0 after 7 msecs
    [ 0.356000] calling rcu_torture_init+0x0/0x562
    [ 0.356000] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1
    [ 0.357000] initcall rcu_torture_init+0x0/0x562 returned 0 after 0 msecs
    [ 0.357000] calling relay_init+0x0/0x16
    [ 0.357000] initcall relay_init+0x0/0x16 returned 0 after 0 msecs
    [ 0.357000] calling utsname_sysctl_init+0x0/0x16
    [ 0.357000] initcall utsname_sysctl_init+0x0/0x16 returned 0 after 0 msecs
    [ 0.357000] calling init_sched_switch_trace+0x0/0x38
    [ 0.357000] Testing tracer sched_switch: PASSED
    [ 0.459000] initcall init_sched_switch_trace+0x0/0x38 returned 0 after 97 msecs
    [ 0.459000] calling init_function_trace+0x0/0xf
    [ 0.459000] Testing tracer ftrace: PASSED
    [ 0.565500] initcall init_function_trace+0x0/0xf returned 0 after 101 msecs
    [ 0.565500] calling init_irqsoff_tracer+0x0/0x11
    [ 0.565500] Testing tracer preemptoff: .. no entries found ..FAILED!
    [ 0.566500] initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 0 msecs
    [ 0.567500] calling init_wakeup_tracer+0x0/0xf
    [ 0.567500] Testing tracer wakeup: .. no entries found ..FAILED!
    [ 0.769500] initcall init_wakeup_tracer+0x0/0xf returned -1 after 192 msecs
    [ 0.769500] initcall init_wakeup_tracer+0x0/0xf returned with error code -1
    [ 0.769500] calling init_mmio_trace+0x0/0xf
    [ 0.769500] initcall init_mmio_trace+0x0/0xf returned 0 after 0 msecs
    [ 0.769500] calling init_per_zone_pages_min+0x0/0x4d
    [ 0.769500] initcall init_per_zone_pages_min+0x0/0x4d returned 0 after 0 msecs
    [ 0.770500] calling pdflush_init+0x0/0x1b
    [ 0.770500] initcall pdflush_init+0x0/0x1b returned 0 after 0 msecs
    [ 0.770500] calling kswapd_init+0x0/0x22
    [ 0.770500] initcall kswapd_init+0x0/0x22 returned 0 after 0 msecs
    [ 0.770500] calling setup_vmstat+0x0/0x3c
    [ 0.770500] initcall setup_vmstat+0x0/0x3c returned 0 after 0 msecs
    [ 0.770500] calling init_emergency_pool+0x0/0x5d
    [ 0.770500] highmem bounce pool size: 64 pages
    [ 0.771500] initcall init_emergency_pool+0x0/0x5d returned 0 after 0 msecs
    [ 0.771500] calling init_tmpfs+0x0/0xbe
    [ 0.771500] initcall init_tmpfs+0x0/0xbe returned 0 after 0 msecs
    [ 0.771500] calling cpucache_init+0x0/0x2d
    [ 0.771500] initcall cpucache_init+0x0/0x2d returned 0 after 0 msecs
    [ 0.771500] calling fasync_init+0x0/0x29
    [ 0.771500] initcall fasync_init+0x0/0x29 returned 0 after 0 msecs
    [ 0.771500] calling aio_setup+0x0/0x69
    [ 0.772500] initcall aio_setup+0x0/0x69 returned 0 after 0 msecs
    [ 0.772500] calling init_mbcache+0x0/0x16
    [ 0.772500] initcall init_mbcache+0x0/0x16 returned 0 after 0 msecs
    [ 0.772500] calling dquot_init+0x0/0xc6
    [ 0.772500] VFS: Disk quotas dquot_6.5.1
    [ 0.772500] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.772500] initcall dquot_init+0x0/0xc6 returned 0 after 0 msecs
    [ 0.772500] calling init_devpts_fs+0x0/0x38
    [ 0.773500] initcall init_devpts_fs+0x0/0x38 returned 0 after 0 msecs
    [ 0.773500] calling init_ext3_fs+0x0/0x64
    [ 0.773500] initcall init_ext3_fs+0x0/0x64 returned 0 after 0 msecs
    [ 0.773500] calling journal_init+0x0/0x8a
    [ 0.773500] initcall journal_init+0x0/0x8a returned 0 after 0 msecs
    [ 0.773500] calling init_ramfs_fs+0x0/0x14
    [ 0.773500] initcall init_ramfs_fs+0x0/0x14 returned 0 after 0 msecs
    [ 0.774500] calling vxfs_init+0x0/0x52
    [ 0.774500] initcall vxfs_init+0x0/0x52 returned 0 after 0 msecs
    [ 0.774500] calling init_nls_cp855+0x0/0x14
    [ 0.774500] initcall init_nls_cp855+0x0/0x14 returned 0 after 0 msecs
    [ 0.774500] calling init_nls_cp860+0x0/0x14
    [ 0.774500] initcall init_nls_cp860+0x0/0x14 returned 0 after 0 msecs
    [ 0.774500] calling init_nls_cp864+0x0/0x14
    [ 0.774500] initcall init_nls_cp864+0x0/0x14 returned 0 after 0 msecs
    [ 0.774500] calling init_nls_cp869+0x0/0x14
    [ 0.775500] initcall init_nls_cp869+0x0/0x14 returned 0 after 0 msecs
    [ 0.775500] calling init_nls_cp949+0x0/0x14
    [ 0.775500] initcall init_nls_cp949+0x0/0x14 returned 0 after 0 msecs
    [ 0.775500] calling init_nls_cp1251+0x0/0x14
    [ 0.775500] initcall init_nls_cp1251+0x0/0x14 returned 0 after 0 msecs
    [ 0.775500] calling init_nls_iso8859_5+0x0/0x14
    [ 0.775500] initcall init_nls_iso8859_5+0x0/0x14 returned 0 after 0 msecs
    [ 0.775500] calling init_nls_iso8859_7+0x0/0x14
    [ 0.775500] initcall init_nls_iso8859_7+0x0/0x14 returned 0 after 0 msecs
    [ 0.776500] calling init_nls_cp1255+0x0/0x14
    [ 0.776500] initcall init_nls_cp1255+0x0/0x14 returned 0 after 0 msecs
    [ 0.776500] calling init_nls_iso8859_9+0x0/0x14
    [ 0.776500] initcall init_nls_iso8859_9+0x0/0x14 returned 0 after 0 msecs
    [ 0.776500] calling init_nls_utf8+0x0/0x24
    [ 0.776500] initcall init_nls_utf8+0x0/0x24 returned 0 after 0 msecs
    [ 0.776500] calling init_sysv_fs+0x0/0x48
    [ 0.776500] initcall init_sysv_fs+0x0/0x48 returned 0 after 0 msecs
    [ 0.777500] calling init_ufs_fs+0x0/0x54
    [ 0.777500] initcall init_ufs_fs+0x0/0x54 returned 0 after 0 msecs
    [ 0.777500] calling init_jfs_fs+0x0/0x188
    [ 0.777500] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 0.782500] initcall init_jfs_fs+0x0/0x188 returned 0 after 4 msecs
    [ 0.782500] calling init_xfs_fs+0x0/0x5f
    [ 0.782500] SGI XFS with ACLs, security attributes, no debug enabled
    [ 0.783500] SGI XFS Quota Management subsystem
    [ 0.783500] initcall init_xfs_fs+0x0/0x5f returned 0 after 0 msecs
    [ 0.783500] calling ipc_init+0x0/0x25
    [ 0.783500] msgmni has been set to 2176
    [ 0.784500] initcall ipc_init+0x0/0x25 returned 0 after 0 msecs
    [ 0.784500] calling ipc_sysctl_init+0x0/0x16
    [ 0.784500] initcall ipc_sysctl_init+0x0/0x16 returned 0 after 0 msecs
    [ 0.784500] calling init_mqueue_fs+0x0/0xbb
    [ 0.784500] initcall init_mqueue_fs+0x0/0xbb returned 0 after 0 msecs
    [ 0.784500] calling key_proc_init+0x0/0x53
    [ 0.784500] initcall key_proc_init+0x0/0x53 returned 0 after 0 msecs
    [ 0.785500] calling crypto_algapi_init+0x0/0x11
    [ 0.785500] initcall crypto_algapi_init+0x0/0x11 returned 0 after 0 msecs
    [ 0.785500] calling blkcipher_module_init+0x0/0x29
    [ 0.785500] initcall blkcipher_module_init+0x0/0x29 returned 0 after 0 msecs
    [ 0.785500] calling seqiv_module_init+0x0/0x14
    [ 0.785500] initcall seqiv_module_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.785500] calling cryptomgr_init+0x0/0x14
    [ 0.785500] initcall cryptomgr_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.785500] calling hmac_module_init+0x0/0x14
    [ 0.786500] initcall hmac_module_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.786500] calling crypto_xcbc_module_init+0x0/0x14
    [ 0.786500] initcall crypto_xcbc_module_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.786500] calling crypto_null_mod_init+0x0/0x6c
    [ 0.786500] initcall crypto_null_mod_init+0x0/0x6c returned 0 after 0 msecs
    [ 0.786500] calling md5_mod_init+0x0/0x14
    [ 0.786500] initcall md5_mod_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.786500] calling sha1_generic_mod_init+0x0/0x14
    [ 0.786500] initcall sha1_generic_mod_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.787500] calling sha512_generic_mod_init+0x0/0x38
    [ 0.787500] initcall sha512_generic_mod_init+0x0/0x38 returned 0 after 0 msecs
    [ 0.787500] calling crypto_ecb_module_init+0x0/0x14
    [ 0.787500] initcall crypto_ecb_module_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.787500] calling crypto_cbc_module_init+0x0/0x14
    [ 0.787500] initcall crypto_cbc_module_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.787500] calling crypto_pcbc_module_init+0x0/0x14
    [ 0.787500] initcall crypto_pcbc_module_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.788500] calling crypto_module_init+0x0/0x14
    [ 0.788500] initcall crypto_module_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.788500] calling crypto_ctr_module_init+0x0/0x38
    [ 0.788500] initcall crypto_ctr_module_init+0x0/0x38 returned 0 after 0 msecs
    [ 0.788500] calling crypto_gcm_module_init+0x0/0x52
    [ 0.788500] initcall crypto_gcm_module_init+0x0/0x52 returned 0 after 0 msecs
    [ 0.788500] calling crypto_ccm_module_init+0x0/0x52
    [ 0.788500] initcall crypto_ccm_module_init+0x0/0x52 returned 0 after 0 msecs
    [ 0.789500] calling des_generic_mod_init+0x0/0x38
    [ 0.789500] initcall des_generic_mod_init+0x0/0x38 returned 0 after 0 msecs
    [ 0.789500] calling fcrypt_mod_init+0x0/0x14
    [ 0.789500] initcall fcrypt_mod_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.789500] calling twofish_mod_init+0x0/0x14
    [ 0.789500] initcall twofish_mod_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.789500] calling cast5_mod_init+0x0/0x14
    [ 0.789500] initcall cast5_mod_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.789500] calling deflate_mod_init+0x0/0x14
    [ 0.790500] initcall deflate_mod_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.790500] calling michael_mic_init+0x0/0x14
    [ 0.790500] initcall michael_mic_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.790500] calling crc32c_mod_init+0x0/0x38
    [ 0.790500] initcall crc32c_mod_init+0x0/0x38 returned 0 after 0 msecs
    [ 0.790500] calling crypto_authenc_module_init+0x0/0x14
    [ 0.791500] initcall crypto_authenc_module_init+0x0/0x14 returned 0 after 0 msecs
    [ 0.791500] calling bsg_init+0x0/0x106
    [ 0.792500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    [ 0.792500] initcall bsg_init+0x0/0x106 returned 0 after 0 msecs
    [ 0.792500] calling noop_init+0x0/0x16
    [ 0.792500] io scheduler noop registered (default)
    [ 0.792500] initcall noop_init+0x0/0x16 returned 0 after 0 msecs
    [ 0.792500] calling percpu_counter_startup+0x0/0x11
    [ 0.792500] initcall percpu_counter_startup+0x0/0x11 returned 0 after 0 msecs
    [ 0.792500] calling pci_init+0x0/0x31
    [ 0.792500] pci 0000:00:02.0: Boot video device
    [ 0.793500] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
    [ 0.793500] pci 0000:00:1d.0: Performing full reset
    [ 0.793500] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
    [ 0.793500] pci 0000:00:1d.1: Performing full reset
    [ 0.793500] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
    [ 0.793500] pci 0000:00:1d.2: Performing full reset
    [ 0.793500] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
    [ 0.793500] pci 0000:00:1d.3: Performing full reset
    [ 0.793500] initcall pci_init+0x0/0x31 returned 0 after 0 msecs
    [ 0.794500] calling pci_proc_init+0x0/0x60
    [ 0.794500] initcall pci_proc_init+0x0/0x60 returned 0 after 0 msecs
    [ 0.794500] calling arcfb_init+0x0/0x65
    [ 0.794500] initcall arcfb_init+0x0/0x65 returned -6 after 0 msecs
    [ 0.794500] initcall arcfb_init+0x0/0x65 returned with error code -6
    [ 0.794500] calling rivafb_init+0x0/0x1ab
    [ 0.794500] rivafb_setup START
    [ 0.795500] initcall rivafb_init+0x0/0x1ab returned 0 after 0 msecs
    [ 0.795500] calling kyrofb_init+0x0/0xd0
    [ 0.795500] initcall kyrofb_init+0x0/0xd0 returned 0 after 0 msecs
    [ 0.795500] calling gxfb_init+0x0/0x73
    [ 0.796500] initcall gxfb_init+0x0/0x73 returned 0 after 0 msecs
    [ 0.796500] calling tridentfb_init+0x0/0x1f8
    [ 0.796500] tridentfb: Trident framebuffer 0.7.8-NEWAPI initializing
    [ 0.796500] initcall tridentfb_init+0x0/0x1f8 returned 0 after 0 msecs
    [ 0.796500] calling hgafb_init+0x0/0x4d
    [ 0.797500] hgafb: HGA card not detected.
    [ 0.797500] hgafb: probe of hgafb.0 failed with error -22
    [ 0.797500] initcall hgafb_init+0x0/0x4d returned 0 after 0 msecs
    [ 0.797500] calling sstfb_init+0x0/0x193
    [ 0.797500] initcall sstfb_init+0x0/0x193 returned 0 after 0 msecs
    [ 0.797500] calling s1d13xxxfb_init+0x0/0x2d
    [ 0.797500] initcall s1d13xxxfb_init+0x0/0x2d returned 0 after 0 msecs
    [ 0.798500] calling efifb_init+0x0/0x46
    [ 0.798500] initcall efifb_init+0x0/0x46 returned -19 after 0 msecs
    [ 0.798500] calling acpi_reserve_resources+0x0/0xcd
    [ 0.798500] initcall acpi_reserve_resources+0x0/0xcd returned 0 after 0 msecs
    [ 0.798500] calling acpi_battery_init+0x0/0x42
    [ 0.842000] ACPI: Battery Slot [BAT0] (battery present)
    [ 0.842000] initcall acpi_battery_init+0x0/0x42 returned 0 after 41 msecs
    [ 0.842000] calling acpi_button_init+0x0/0x56
    [ 0.843000] input: Power Button (FF) as /class/input/input0
    [ 0.843000] ACPI: Power Button (FF) [PWRF]
    [ 0.843000] input: Lid Switch as /class/input/input1
    [ 0.844000] ACPI: Lid Switch [LID]
    [ 0.844000] input: Sleep Button (CM) as /class/input/input2
    [ 0.844000] ACPI: Sleep Button (CM) [SLPB]
    [ 0.845000] initcall acpi_button_init+0x0/0x56 returned 0 after 2 msecs
    [ 0.845000] calling irqrouter_init_sysfs+0x0/0x38
    [ 0.845000] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 0 msecs
    [ 0.845000] calling acpi_pci_slot_init+0x0/0x16
    [ 0.846000] initcall acpi_pci_slot_init+0x0/0x16 returned 0 after 0 msecs
    [ 0.846000] calling pnpbios_thread_init+0x0/0x53
    [ 0.846000] initcall pnpbios_thread_init+0x0/0x53 returned 0 after 0 msecs
    [ 0.846000] calling rand_initialize+0x0/0x2a
    [ 0.846000] initcall rand_initialize+0x0/0x2a returned 0 after 0 msecs
    [ 0.846000] calling tty_init+0x0/0x194
    [ 0.853000] initcall tty_init+0x0/0x194 returned 0 after 6 msecs
    [ 0.853000] calling pty_init+0x0/0x1f5
    [ 0.853000] initcall pty_init+0x0/0x1f5 returned 0 after 0 msecs
    [ 0.853000] calling lp_init_module+0x0/0x209
    [ 0.854000] lp: driver loaded but no devices found
    [ 0.854000] initcall lp_init_module+0x0/0x209 returned 0 after 0 msecs
    [ 0.854000] calling r3964_init+0x0/0x3d
    [ 0.854000] r3964: Philips r3964 Driver $Revision: 1.10 $
    [ 0.854000] initcall r3964_init+0x0/0x3d returned 0 after 0 msecs
    [ 0.854000] calling sonypi_init+0x0/0x1e
    [ 0.854000] sonypi: Sony Programmable I/O Controller Driver v1.26.
    [ 0.854000] initcall sonypi_init+0x0/0x1e returned -19 after 0 msecs
    [ 0.854000] calling i8k_init+0x0/0x13c
    [ 0.855000] initcall i8k_init+0x0/0x13c returned -19 after 0 msecs
    [ 0.855000] calling ppdev_init+0x0/0x9a
    [ 0.855000] ppdev: user-space parallel port driver
    [ 0.855000] initcall ppdev_init+0x0/0x9a returned 0 after 0 msecs
    [ 0.855000] calling nsc_gpio_init+0x0/0x16
    [ 0.855000] nsc_gpio initializing
    [ 0.855000] initcall nsc_gpio_init+0x0/0x16 returned 0 after 0 msecs
    [ 0.855000] calling cs5535_gpio_init+0x0/0x16c
    [ 0.855000] cs5535_gpio: DIVIL not found
    [ 0.856000] initcall cs5535_gpio_init+0x0/0x16c returned -19 after 0 msecs
    [ 0.856000] calling agp_init+0x0/0x26
    [ 0.856000] Linux agpgart interface v0.103
    [ 0.856000] initcall agp_init+0x0/0x26 returned 0 after 0 msecs
    [ 0.856000] calling agp_ali_init+0x0/0x29
    [ 0.856000] initcall agp_ali_init+0x0/0x29 returned 0 after 0 msecs
    [ 0.856000] calling agp_ati_init+0x0/0x29
    [ 0.857000] initcall agp_ati_init+0x0/0x29 returned 0 after 0 msecs
    [ 0.857000] calling agp_amdk7_init+0x0/0x29
    [ 0.857000] initcall agp_amdk7_init+0x0/0x29 returned 0 after 0 msecs
    [ 0.857000] calling agp_efficeon_init+0x0/0x3e
    [ 0.857000] initcall agp_efficeon_init+0x0/0x3e returned 0 after 0 msecs
    [ 0.858000] calling agp_intel_init+0x0/0x29
    [ 0.858000] agpgart: Detected an Intel 945GM Chipset.
    [ 0.859000] agpgart: Detected 7932K stolen memory.
    [ 0.876000] agpgart: AGP aperture is 256M @ 0xd0000000
    [ 0.876000] initcall agp_intel_init+0x0/0x29 returned 0 after 17 msecs
    [ 0.876000] calling agp_serverworks_init+0x0/0x29
    [ 0.877000] initcall agp_serverworks_init+0x0/0x29 returned 0 after 0 msecs
    [ 0.877000] calling ipmi_init_msghandler_mod+0x0/0x11
    [ 0.877000] ipmi message handler version 39.2
    [ 0.877000] initcall ipmi_init_msghandler_mod+0x0/0x11 returned 0 after 0 msecs
    [ 0.877000] calling init_ipmi_si+0x0/0x53b
    [ 0.878000] IPMI System Interface driver.
    [ 0.878000] ipmi_si: Unable to find any System Interface(s)
    [ 0.878000] initcall init_ipmi_si+0x0/0x53b returned -19 after 0 msecs
    [ 0.878000] calling ipmi_wdog_init+0x0/0x103
    [ 0.878000] IPMI Watchdog: driver initialized
    [ 0.879000] initcall ipmi_wdog_init+0x0/0x103 returned 0 after 0 msecs
    [ 0.879000] calling ipmi_poweroff_init+0x0/0x7b
    [ 0.879000] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
    [ 0.879000] initcall ipmi_poweroff_init+0x0/0x7b returned 0 after 0 msecs
    [ 0.879000] calling intelfb_init+0x0/0x4e6
    [ 0.879000] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets
    [ 0.879000] intelfb: Version 0.9.5
    [ 0.880000] intelfb 0000:00:02.0: power state changed by ACPI to D0
    [ 0.880000] Pin 1-16 already programmed
    [ 0.880000] intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.880000] intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 7932kB
    [ 0.884000] intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
    [ 0.884000] intelfb: Video mode must be programmed at boot time.
    [ 0.886000] initcall intelfb_init+0x0/0x4e6 returned 0 after 6 msecs
    [ 0.886000] calling serial8250_init+0x0/0x111
    [ 0.886000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    [ 0.887000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    [ 0.887000] initcall serial8250_init+0x0/0x111 returned 0 after 0 msecs
    [ 0.887000] calling parport_default_proc_register+0x0/0x1b
    [ 0.887000] initcall parport_default_proc_register+0x0/0x1b returned 0 after 0 msecs
    [ 0.888000] calling isa_bus_init+0x0/0x38
    [ 0.888000] initcall isa_bus_init+0x0/0x38 returned 0 after 0 msecs
    [ 0.888000] calling topology_sysfs_init+0x0/0x3b
    [ 0.888000] initcall topology_sysfs_init+0x0/0x3b returned 0 after 0 msecs
    [ 0.888000] calling floppy_init+0x0/0xdb1
    [ 3.899000] floppy0: no floppy controllers found
    [ 3.899000] initcall floppy_init+0x0/0xdb1 returned -19 after 2871 msecs
    [ 3.899000] calling brd_init+0x0/0x136
    [ 3.903000] brd: module loaded
    [ 3.903000] initcall brd_init+0x0/0x136 returned 0 after 3 msecs
    [ 3.903000] calling cpqarray_init+0x0/0x230
    [ 3.903000] Compaq SMART2 Driver (v 2.6.0)
    [ 3.904000] initcall cpqarray_init+0x0/0x230 returned 0 after 0 msecs
    [ 3.904000] calling cciss_init+0x0/0x25
    [ 3.904000] HP CISS Driver (v 3.6.20)
    [ 3.904000] initcall cciss_init+0x0/0x25 returned 0 after 0 msecs
    [ 3.904000] calling DAC960_init_module+0x0/0x46
    [ 3.905000] initcall DAC960_init_module+0x0/0x46 returned 0 after 0 msecs
    [ 3.905000] calling mm_init+0x0/0x14b
    [ 3.905000] MM: desc_per_page = 128
    [ 3.905000] initcall mm_init+0x0/0x14b returned 0 after 0 msecs
    [ 3.905000] calling nbd_init+0x0/0x28f
    [ 3.906000] nbd: registered device at major 43
    [ 3.910000] initcall nbd_init+0x0/0x28f returned 0 after 4 msecs
    [ 3.910000] calling carm_init+0x0/0x1b
    [ 3.910000] initcall carm_init+0x0/0x1b returned 0 after 0 msecs
    [ 3.910000] calling lkdtm_module_init+0x0/0x1c4
    [ 3.910000] lkdtm : Invalid command
    [ 3.911000] initcall lkdtm_module_init+0x0/0x1c4 returned -22 after 0 msecs
    [ 3.911000] initcall lkdtm_module_init+0x0/0x1c4 returned with error code -22
    [ 3.911000] calling init_kgdbts+0x0/0x1a
    [ 3.911000] initcall init_kgdbts+0x0/0x1a returned 0 after 0 msecs
    [ 3.911000] calling e1000_init_module+0x0/0x58
    [ 3.912000] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
    [ 3.912000] e1000e: Copyright (c) 1999-2008 Intel Corporation.
    [ 3.912000] e1000e 0000:02:00.0: Disabling L1 ASPM
    [ 3.913000] vendor=8086 device=27d0
    [ 3.913000] Pin 1-16 already programmed
    [ 3.913000] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.913000] PCI: Setting latency timer of device 0000:02:00.0 to 64
    [ 3.996000] eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2
    [ 3.997000] eth0: Intel(R) PRO/1000 Network Connection
    [ 3.997000] eth0: MAC: 2, PHY: 2, PBA No: 005301-003
    [ 3.997000] initcall e1000_init_module+0x0/0x58 returned 0 after 81 msecs
    [ 3.997000] calling ixgbe_init_module+0x0/0x48
    [ 3.997000] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
    [ 3.997000] ixgbe: Copyright (c) 1999-2007 Intel Corporation.
    [ 3.998000] initcall ixgbe_init_module+0x0/0x48 returned 0 after 0 msecs
    [ 3.998000] calling ixgb_init_module+0x0/0x3e
    [ 3.998000] Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
    [ 3.998000] Copyright (c) 1999-2006 Intel Corporation.
    [ 3.998000] initcall ixgb_init_module+0x0/0x3e returned 0 after 0 msecs
    [ 3.998000] calling atl1_init_module+0x0/0x1b
    [ 3.999000] initcall atl1_init_module+0x0/0x1b returned 0 after 0 msecs
    [ 3.999000] calling plip_init+0x0/0x57
    [ 3.999000] initcall plip_init+0x0/0x57 returned 0 after 0 msecs
    [ 3.999000] calling happy_meal_probe+0x0/0x1b
    [ 3.999000] initcall happy_meal_probe+0x0/0x1b returned 0 after 0 msecs
    [ 3.999000] calling vortex_init+0x0/0xa1
    [ 4.000000] initcall vortex_init+0x0/0xa1 returned 0 after 0 msecs
    [ 4.000000] calling ne2k_pci_init+0x0/0x1b
    [ 4.000000] initcall ne2k_pci_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.000000] calling e100_init_module+0x0/0x52
    [ 4.000000] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    [ 4.000000] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 4.001000] initcall e100_init_module+0x0/0x52 returned 0 after 0 msecs
    [ 4.001000] calling epic_init+0x0/0x1b
    [ 4.001000] initcall epic_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.001000] calling acenic_init+0x0/0x1b
    [ 4.001000] initcall acenic_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.002000] calling ns83820_init+0x0/0x25
    [ 4.002000] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    [ 4.002000] initcall ns83820_init+0x0/0x25 returned 0 after 0 msecs
    [ 4.002000] calling tg3_init+0x0/0x1b
    [ 4.002000] initcall tg3_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.002000] calling bnx2x_init+0x0/0x1b
    [ 4.003000] initcall bnx2x_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.003000] calling skfd_init+0x0/0x1b
    [ 4.003000] initcall skfd_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.003000] calling velocity_init_module+0x0/0x34
    [ 4.003000] initcall velocity_init_module+0x0/0x34 returned 0 after 0 msecs
    [ 4.004000] calling cicada_init+0x0/0x38
    [ 4.004000] initcall cicada_init+0x0/0x38 returned 0 after 0 msecs
    [ 4.004000] calling hamachi_init+0x0/0x1b
    [ 4.004000] initcall hamachi_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.004000] calling net_olddevs_init+0x0/0x86
    [ 4.005000] initcall net_olddevs_init+0x0/0x86 returned 0 after 0 msecs
    [ 4.005000] calling sb1000_init+0x0/0x14
    [ 4.005000] initcall sb1000_init+0x0/0x14 returned 0 after 0 msecs
    [ 4.005000] calling hp100_module_init+0x0/0x1b
    [ 4.005000] initcall hp100_module_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.005000] calling init_nic+0x0/0x1b
    [ 4.006000] initcall init_nic+0x0/0x1b returned 0 after 0 msecs
    [ 4.006000] calling dummy_init_module+0x0/0x9a
    [ 4.006000] initcall dummy_init_module+0x0/0x9a returned 0 after 0 msecs
    [ 4.006000] calling macvlan_init_module+0x0/0x4a
    [ 4.006000] initcall macvlan_init_module+0x0/0x4a returned 0 after 0 msecs
    [ 4.007000] calling dfx_init+0x0/0x1b
    [ 4.007000] initcall dfx_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.007000] calling el3_init_module+0x0/0x109
    [ 4.050000] initcall el3_init_module+0x0/0x109 returned 0 after 41 msecs
    [ 4.050000] calling rtl8139_init_module+0x0/0x1b
    [ 4.050000] initcall rtl8139_init_module+0x0/0x1b returned 0 after 0 msecs
    [ 4.050000] calling myri10ge_init_module+0x0/0x30
    [ 4.050000] myri10ge: Version 1.3.99-1.347
    [ 4.051000] initcall myri10ge_init_module+0x0/0x30 returned 0 after 0 msecs
    [ 4.051000] calling arcnet_init+0x0/0x55
    [ 4.051000] arcnet loaded.
    [ 4.051000] initcall arcnet_init+0x0/0x55 returned 0 after 0 msecs
    [ 4.051000] calling arcnet_rfc1051_init+0x0/0x42
    [ 4.051000] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
    [ 4.051000] initcall arcnet_rfc1051_init+0x0/0x42 returned 0 after 0 msecs
    [ 4.051000] calling arcnet_raw_init+0x0/0x57
    [ 4.051000] arcnet: raw mode (`r') encapsulation support loaded.
    [ 4.052000] initcall arcnet_raw_init+0x0/0x57 returned 0 after 0 msecs
    [ 4.052000] calling kaweth_init+0x0/0x2a
    [ 4.052000] drivers/net/usb/kaweth.c: Driver loading
    [ 4.052000] usbcore: registered new interface driver kaweth
    [ 4.052000] initcall kaweth_init+0x0/0x2a returned 0 after 0 msecs
    [ 4.052000] calling cdc_init+0x0/0x1b
    [ 4.052000] usbcore: registered new interface driver cdc_ether
    [ 4.052000] initcall cdc_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.053000] calling net1080_init+0x0/0x1b
    [ 4.053000] usbcore: registered new interface driver net1080
    [ 4.053000] initcall net1080_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.053000] calling plusb_init+0x0/0x1b
    [ 4.053000] usbcore: registered new interface driver plusb
    [ 4.053000] initcall plusb_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.053000] calling rndis_init+0x0/0x1b
    [ 4.054000] usbcore: registered new interface driver rndis_host
    [ 4.054000] initcall rndis_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.054000] calling mcs7830_init+0x0/0x1b
    [ 4.054000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
    [ 4.054000] initcall mcs7830_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.054000] calling usbnet_init+0x0/0x2b
    [ 4.054000] initcall usbnet_init+0x0/0x2b returned 0 after 0 msecs
    [ 4.054000] calling ipw2100_init+0x0/0x5f
    [ 4.055000] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
    [ 4.055000] ipw2100: Copyright(c) 2003-2006 Intel Corporation
    [ 4.055000] initcall ipw2100_init+0x0/0x5f returned 0 after 0 msecs
    [ 4.055000] calling ipw_init+0x0/0x73
    [ 4.055000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmprq
    [ 4.055000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
    [ 4.056000] initcall ipw_init+0x0/0x73 returned 0 after 0 msecs
    [ 4.056000] calling strip_init_driver+0x0/0x5c
    [ 4.056000] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
    [ 4.056000] initcall strip_init_driver+0x0/0x5c returned 0 after 0 msecs
    [ 4.056000] calling rndis_wlan_init+0x0/0x1b
    [ 4.056000] usbcore: registered new interface driver rndis_wlan
    [ 4.056000] initcall rndis_wlan_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.056000] calling zd1201_init+0x0/0x1b
    [ 4.057000] usbcore: registered new interface driver zd1201
    [ 4.057000] initcall zd1201_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.057000] calling w840_init+0x0/0x25
    [ 4.057000] winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker
    [ 4.057000] http://www.scyld.com/network/drivers.html
    [ 4.057000] initcall w840_init+0x0/0x25 returned 0 after 0 msecs
    [ 4.057000] calling uli526x_init_module+0x0/0x92
    [ 4.058000] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
    [ 4.058000] initcall uli526x_init_module+0x0/0x92 returned 0 after 0 msecs
    [ 4.058000] calling stir_init+0x0/0x1b
    [ 4.058000] usbcore: registered new interface driver stir4200
    [ 4.058000] initcall stir_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.058000] calling nsc_ircc_init+0x0/0x1d9
    [ 4.059000] nsc-ircc, chip->init
    [ 4.059000] nsc-ircc, Found chip at base=0x164e
    [ 4.059000] nsc-ircc, driver loaded (Dag Brattli)
    [ 4.059000] nsc_ircc_open(), can't get iobase of 0x2f8
    [ 4.059000] nsc-ircc, Found chip at base=0x164e
    [ 4.059000] nsc-ircc, driver loaded (Dag Brattli)
    [ 4.059000] nsc_ircc_open(), can't get iobase of 0x2f8
    [ 4.060000] nsc-ircc 00:0a: disabled
    [ 4.060000] initcall nsc_ircc_init+0x0/0x1d9 returned -19 after 0 msecs
    [ 4.060000] calling w83977af_init+0x0/0x43a
    [ 4.060000] initcall w83977af_init+0x0/0x43a returned -19 after 0 msecs
    [ 4.061000] calling donauboe_init+0x0/0x1b
    [ 4.061000] initcall donauboe_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.061000] calling irtty_sir_init+0x0/0x3b
    [ 4.061000] initcall irtty_sir_init+0x0/0x3b returned 0 after 0 msecs
    [ 4.061000] calling sir_wq_init+0x0/0x34
    [ 4.061000] initcall sir_wq_init+0x0/0x34 returned 0 after 0 msecs
    [ 4.061000] calling ksdazzle_init+0x0/0x1b
    [ 4.062000] usbcore: registered new interface driver ksdazzle-sir
    [ 4.062000] initcall ksdazzle_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.062000] calling ks959_init+0x0/0x1b
    [ 4.062000] usbcore: registered new interface driver ks959-sir
    [ 4.062000] initcall ks959_init+0x0/0x1b returned 0 after 0 msecs
    [ 4.062000] calling init_netconsole+0x0/0x16c
    [ 4.062000] netconsole: local port 4444
    [ 4.062000] netconsole: local IP 10.0.1.15
    [ 4.063000] netconsole: interface eth0
    [ 4.063000] netconsole: remote port 4444
    [ 4.063000] netconsole: remote IP 10.0.1.16
    [ 4.063000] netconsole: remote ethernet address 00:19:d1:01:f5:55
    [ 4.063000] netconsole: device eth0 not up yet, forcing it
    [ 8.080000] netconsole: timeout waiting for carrier
    [ 8.081000] eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
    [ 8.082000] console [netcon0] enabled
    [ 8.083000] netconsole: network logging started
    [ 8.083000] initcall init_netconsole+0x0/0x16c returned 0 after 3834 msecs
    [ 8.084000] calling niu_init+0x0/0x3b
    [ 8.084000] initcall niu_init+0x0/0x3b returned 0 after 0 msecs
    [ 8.084000] calling videodev_init+0x0/0x73
    [ 8.084000] Linux video capture interface: v2.00
    [ 8.084000] initcall videodev_init+0x0/0x73 returned 0 after 0 msecs
    [ 8.085000] calling amb_module_init+0x0/0x106
    [ 8.086000] Madge ATM Ambassador driver version 1.2.4
    [ 8.086000] initcall amb_module_init+0x0/0x106 returned 0 after 0 msecs
    [ 8.086000] calling hrz_module_init+0x0/0xbf
    [ 8.086000] Madge ATM Horizon [Ultra] driver version 1.2.1
    [ 8.086000] hrz: debug bitmap is 0
    [ 8.086000] initcall hrz_module_init+0x0/0xbf returned 0 after 0 msecs
    [ 8.087000] calling fore200e_module_init+0x0/0xbc
    [ 8.087000] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
    [ 8.087000] initcall fore200e_module_init+0x0/0xbc returned 0 after 0 msecs
    [ 8.087000] calling lanai_module_init+0x0/0x32
    [ 8.087000] initcall lanai_module_init+0x0/0x32 returned 0 after 0 msecs
    [ 8.088000] calling scsi_tgt_init+0x0/0x7a
    [ 8.088000] initcall scsi_tgt_init+0x0/0x7a returned 0 after 0 msecs
    [ 8.088000] calling raid_init+0x0/0x14
    [ 8.088000] initcall raid_init+0x0/0x14 returned 0 after 0 msecs
    [ 8.089000] calling spi_transport_init+0x0/0x2c
    [ 8.089000] initcall spi_transport_init+0x0/0x2c returned 0 after 0 msecs
    [ 8.089000] calling fc_transport_init+0x0/0x48
    [ 8.089000] initcall fc_transport_init+0x0/0x48 returned 0 after 0 msecs
    [ 8.090000] calling iscsi_transport_init+0x0/0x11d
    [ 8.090000] Loading iSCSI transport class v2.0-870.
    [ 8.090000] initcall iscsi_transport_init+0x0/0x11d returned 0 after 0 msecs
    [ 8.090000] calling iscsi_tcp_init+0x0/0x3f
    [ 8.091000] iscsi: registered transport (tcp)
    [ 8.091000] initcall iscsi_tcp_init+0x0/0x3f returned 0 after 0 msecs
    [ 8.091000] calling aha152x_init+0x0/0x42a
    [ 8.091000] initcall aha152x_init+0x0/0x42a returned -19 after 0 msecs
    [ 8.091000] calling ahc_linux_init+0x0/0x61
    [ 8.092000] initcall ahc_linux_init+0x0/0x61 returned 0 after 0 msecs
    [ 8.092000] calling aac_init+0x0/0x63
    [ 8.092000] Adaptec aacraid driver 1.1-5[2456]-ms
    [ 8.092000] initcall aac_init+0x0/0x63 returned 0 after 0 msecs
    [ 8.092000] calling init_this_scsi_driver+0x0/0xd0
    [ 8.093000] initcall init_this_scsi_driver+0x0/0xd0 returned -19 after 0 msecs
    [ 8.093000] calling init_this_scsi_driver+0x0/0xd0
    [ 8.094000] initcall init_this_scsi_driver+0x0/0xd0 returned -19 after 0 msecs
    [ 8.094000] calling init_this_scsi_driver+0x0/0xd0
    [ 8.094000] initcall init_this_scsi_driver+0x0/0xd0 returned -19 after 0 msecs
    [ 8.094000] calling init_this_scsi_driver+0x0/0xd0
    [ 8.094000] sym53c416.c: Version 1.0.0-ac
    [ 8.094000] initcall init_this_scsi_driver+0x0/0xd0 returned -19 after 0 msecs
    [ 8.095000] calling qla1280_init+0x0/0x1b
    [ 8.095000] initcall qla1280_init+0x0/0x1b returned 0 after 0 msecs
    [ 8.095000] calling qla2x00_module_init+0x0/0x102
    [ 8.095000] QLogic Fibre Channel HBA Driver: 8.02.01-k4
    [ 8.095000] initcall qla2x00_module_init+0x0/0x102 returned 0 after 0 msecs
    [ 8.096000] calling lpfc_init+0x0/0xa9
    [ 8.096000] Emulex LightPulse Fibre Channel SCSI driver 8.2.7
    [ 8.096000] Copyright(c) 2004-2008 Emulex. All rights reserved.
    [ 8.096000] initcall lpfc_init+0x0/0xa9 returned 0 after 0 msecs
    [ 8.096000] calling init_this_scsi_driver+0x0/0xd0
    [ 8.096000] initcall init_this_scsi_driver+0x0/0xd0 returned -19 after 0 msecs
    [ 8.097000] calling init_this_scsi_driver+0x0/0xd0
    [ 8.097000] initcall init_this_scsi_driver+0x0/0xd0 returned -19 after 0 msecs
    [ 8.097000] calling sym2_init+0x0/0xe4
    [ 8.097000] initcall sym2_init+0x0/0xe4 returned 0 after 0 msecs
    [ 8.097000] calling megaraid_init+0x0/0xa2
    [ 8.098000] initcall megaraid_init+0x0/0xa2 returned 0 after 0 msecs
    [ 8.098000] calling mraid_mm_init+0x0/0x76
    [ 8.098000] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    [ 8.098000] initcall mraid_mm_init+0x0/0x76 returned 0 after 0 msecs
    [ 8.098000] calling megaraid_init+0x0/0x8b
    [ 8.098000] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
    [ 8.099000] initcall megaraid_init+0x0/0x8b returned 0 after 0 msecs
    [ 8.099000] calling tw_init+0x0/0x2a
    [ 8.099000] 3ware Storage Controller device driver for Linux v1.26.02.002.
    [ 8.099000] initcall tw_init+0x0/0x2a returned 0 after 0 msecs
    [ 8.099000] calling init_nsp32+0x0/0x31
    [ 8.099000] nsp32: loading...
    [ 8.100000] initcall init_nsp32+0x0/0x31 returned 0 after 0 msecs
    [ 8.100000] calling hptiop_module_init+0x0/0x2f
    [ 8.100000] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
    [ 8.100000] initcall hptiop_module_init+0x0/0x2f returned 0 after 0 msecs
    [ 8.100000] calling init_sd+0x0/0xb6
    [ 8.101000] Driver 'sd' needs updating - please use bus_type methods
    [ 8.101000] initcall init_sd+0x0/0xb6 returned 0 after 0 msecs
    [ 8.101000] calling init_sr+0x0/0x42
    [ 8.101000] Driver 'sr' needs updating - please use bus_type methods
    [ 8.101000] initcall init_sr+0x0/0x42 returned 0 after 0 msecs
    [ 8.101000] calling init_sg+0x0/0xaf
    [ 8.102000] initcall init_sg+0x0/0xaf returned 0 after 0 msecs
    [ 8.102000] calling init_ch_module+0x0/0x8c
    [ 8.102000] SCSI Media Changer driver v0.25
    [ 8.102000] Driver 'ch' needs updating - please use bus_type methods
    [ 8.102000] initcall init_ch_module+0x0/0x8c returned 0 after 0 msecs
    [ 8.102000] calling ahci_init+0x0/0x1b
    [ 8.103000] ahci 0000:00:1f.2: version 3.0
    [ 8.103000] Pin 1-16 already programmed
    [ 8.103000] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 8.103000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
    [ 8.103000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
    [ 8.103000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
    [ 8.104000] scsi0 : ahci
    [ 8.104000] scsi1 : ahci
    [ 8.104000] scsi2 : ahci
    [ 8.105000] scsi3 : ahci
    [ 8.105000] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 222
    [ 8.105000] ata2: DUMMY
    [ 8.105000] ata3: DUMMY
    [ 8.105000] ata4: DUMMY
    [ 8.411500] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 8.412000] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    [ 8.413000] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    [ 8.413000] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    [ 8.414000] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
    [ 8.414000] ata1.00: 156301488 sectors, multi 16: LBA48
    [ 8.416000] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    [ 8.416000] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    [ 8.417000] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    [ 8.418000] ata1.00: configured for UDMA/100
    [ 8.421000] ata1.00: configured for UDMA/100
    [ 8.421000] ata1: EH complete
    [ 8.422000] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5
    [ 8.422000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    [ 8.422000] sd 0:0:0:0: [sda] Write Protect is off
    [ 8.422000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 8.423000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 8.423000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    [ 8.423000] sd 0:0:0:0: [sda] Write Protect is off
    [ 8.423000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 8.423000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 8.424000] sda: sda1 sda2
    [ 8.843000] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 8.843000] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 8.844000] initcall ahci_init+0x0/0x1b returned 0 after 707 msecs
    [ 8.844000] calling piix_init+0x0/0x29
    [ 8.844000] ata_piix 0000:00:1f.1: version 2.12
    [ 8.844000] Pin 1-16 already programmed
    [ 8.844000] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
    [ 8.845000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
    [ 8.845000] scsi4 : ata_piix
    [ 8.845000] scsi5 : ata_piix
    [ 8.847000] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    [ 8.847000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    [ 9.001000] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
    [ 9.007000] ata5.00: configured for UDMA/33
    [ 9.007000] ata6: port disabled. ignoring.
    [ 9.022000] scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
    [ 9.036000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    [ 9.036000] Uniform CD-ROM driver Revision: 3.20
    [ 9.036000] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 9.037000] sr 4:0:0:0: Attached scsi generic sg1 type 5
    [ 9.037000] initcall piix_init+0x0/0x29 returned 0 after 184 msecs
    [ 9.037000] calling pdc_ata_init+0x0/0x1b
    [ 9.037000] initcall pdc_ata_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.037000] calling sil24_init+0x0/0x1b
    [ 9.038000] initcall sil24_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.038000] calling pdc_sata_init+0x0/0x1b
    [ 9.038000] initcall pdc_sata_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.038000] calling nv_init+0x0/0x1b
    [ 9.039000] initcall nv_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.039000] calling mv_init+0x0/0x3f
    [ 9.039000] initcall mv_init+0x0/0x3f returned 0 after 0 msecs
    [ 9.039000] calling inic_init+0x0/0x1b
    [ 9.040000] initcall inic_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.040000] calling amd_init+0x0/0x1b
    [ 9.040000] initcall amd_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.040000] calling artop_init+0x0/0x1b
    [ 9.041000] initcall artop_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.041000] calling cs5520_init+0x0/0x1b
    [ 9.041000] initcall cs5520_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.041000] calling cs5535_init+0x0/0x1b
    [ 9.041000] initcall cs5535_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.042000] calling efar_init+0x0/0x1b
    [ 9.042000] initcall efar_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.042000] calling hpt37x_init+0x0/0x1b
    [ 9.043000] initcall hpt37x_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.043000] calling hpt3x2n_init+0x0/0x1b
    [ 9.044000] initcall hpt3x2n_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.044000] calling netcell_init+0x0/0x1b
    [ 9.044000] initcall netcell_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.044000] calling ninja32_init+0x0/0x1b
    [ 9.044000] initcall ninja32_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.045000] calling ns87415_init+0x0/0x1b
    [ 9.045000] initcall ns87415_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.045000] calling optidma_init+0x0/0x1b
    [ 9.045000] initcall optidma_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.045000] calling mpiix_init+0x0/0x1b
    [ 9.046000] initcall mpiix_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.046000] calling oldpiix_init+0x0/0x1b
    [ 9.046000] initcall oldpiix_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.046000] calling sc1200_init+0x0/0x1b
    [ 9.047000] initcall sc1200_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.047000] calling serverworks_init+0x0/0x1b
    [ 9.047000] initcall serverworks_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.047000] calling sil680_init+0x0/0x1b
    [ 9.047000] initcall sil680_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.048000] calling via_init+0x0/0x1b
    [ 9.048000] initcall via_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.048000] calling pata_platform_init+0x0/0x14
    [ 9.048000] initcall pata_platform_init+0x0/0x14 returned 0 after 0 msecs
    [ 9.048000] calling cdrom_init+0x0/0x11
    [ 9.049000] initcall cdrom_init+0x0/0x11 returned 0 after 0 msecs
    [ 9.049000] calling mon_init+0x0/0xf3
    [ 9.049000] initcall mon_init+0x0/0xf3 returned 0 after 0 msecs
    [ 9.049000] calling ehci_hcd_init+0x0/0x75
    [ 9.049000] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
    [ 9.050000] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    [ 9.050000] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 9.050000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
    [ 9.050000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 9.051000] drivers/usb/core/inode.c: creating file 'devices'
    [ 9.051000] drivers/usb/core/inode.c: creating file '001'
    [ 9.051000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 9.051000] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
    [ 9.051000] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    [ 9.052000] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
    [ 9.056000] ehci_hcd 0000:00:1d.7: debug port 1
    [ 9.056000] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 9.057000] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    [ 9.057000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
    [ 9.057000] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    [ 9.061000] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    [ 9.068000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [ 9.068000] usb usb1: default language 0x0409
    [ 9.068000] usb usb1: uevent
    [ 9.068000] usb usb1: usb_probe_device
    [ 9.068000] usb usb1: configuration #1 chosen from 1 choice
    [ 9.068000] usb usb1: adding 1-0:1.0 (config #1, interface 0)
    [ 9.069000] usb 1-0:1.0: uevent
    [ 9.069000] hub 1-0:1.0: usb_probe_interface
    [ 9.069000] hub 1-0:1.0: usb_probe_interface - got id
    [ 9.069000] hub 1-0:1.0: USB hub found
    [ 9.069000] hub 1-0:1.0: 8 ports detected
    [ 9.069000] hub 1-0:1.0: standalone hub
    [ 9.069000] hub 1-0:1.0: no power switching (usb 1.0)
    [ 9.069000] hub 1-0:1.0: individual port over-current protection
    [ 9.070000] hub 1-0:1.0: power on to power good time: 20ms
    [ 9.070000] hub 1-0:1.0: local power source is good
    [ 9.070000] hub 1-0:1.0: trying to enable port power on non-switchable hub
    [ 9.171500] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
    [ 9.171000] drivers/usb/core/inode.c: creating file '001'
    [ 9.171500] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
    [ 9.171000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 9.171000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 9.171000] usb usb1: Product: EHCI Host Controller
    [ 9.171000] usb usb1: Manufacturer: Linux 2.6.26-tip-03923-g2c96bcb-dirty ehci_hcd
    [ 9.171000] usb usb1: SerialNumber: 0000:00:1d.7
    [ 9.171000] initcall ehci_hcd_init+0x0/0x75 returned 0 after 116 msecs
    [ 9.171000] calling ohci_hcd_mod_init+0x0/0x85
    [ 9.171000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 9.171000] ohci_hcd: block sizes: ed 64 td 64
    [ 9.171000] initcall ohci_hcd_mod_init+0x0/0x85 returned 0 after 0 msecs
    [ 9.171000] calling uhci_hcd_init+0x0/0xc6
    [ 9.171000] USB Universal Host Controller Interface driver v3.0
    [ 9.172500] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
    [ 9.173000] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    [ 9.173000] Pin 1-16 already programmed
    [ 9.173000] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 9.173000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
    [ 9.174000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 9.174000] drivers/usb/core/inode.c: creating file '002'
    [ 9.174000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 9.174000] uhci_hcd 0000:00:1d.0: detected 2 ports
    [ 9.174000] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    [ 9.174000] uhci_hcd 0000:00:1d.0: Performing full reset
    [ 9.174000] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    [ 9.175000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
    [ 9.175000] usb usb2: default language 0x0409
    [ 9.175000] usb usb2: uevent
    [ 9.175000] usb usb2: usb_probe_device
    [ 9.175000] usb usb2: configuration #1 chosen from 1 choice
    [ 9.175000] usb usb2: adding 2-0:1.0 (config #1, interface 0)
    [ 9.176000] usb 2-0:1.0: uevent
    [ 9.176000] hub 2-0:1.0: usb_probe_interface
    [ 9.176000] hub 2-0:1.0: usb_probe_interface - got id
    [ 9.176000] hub 2-0:1.0: USB hub found
    [ 9.176000] hub 2-0:1.0: 2 ports detected
    [ 9.176000] hub 2-0:1.0: standalone hub
    [ 9.176000] hub 2-0:1.0: no power switching (usb 1.0)
    [ 9.176000] hub 2-0:1.0: individual port over-current protection
    [ 9.177000] hub 2-0:1.0: power on to power good time: 2ms
    [ 9.177000] hub 2-0:1.0: local power source is good
    [ 9.177000] hub 2-0:1.0: trying to enable port power on non-switchable hub
    [ 9.277500] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
    [ 9.278000] drivers/usb/core/inode.c: creating file '001'
    [ 9.278000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    [ 9.278000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 9.278000] usb usb2: Product: UHCI Host Controller
    [ 9.278000] usb usb2: Manufacturer: Linux 2.6.26-tip-03923-g2c96bcb-dirty uhci_hcd
    [ 9.278000] usb usb2: SerialNumber: 0000:00:1d.0
    [ 9.279000] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 9.279000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
    [ 9.279000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 9.279000] drivers/usb/core/inode.c: creating file '003'
    [ 9.279000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 9.279000] uhci_hcd 0000:00:1d.1: detected 2 ports
    [ 9.280000] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    [ 9.280000] uhci_hcd 0000:00:1d.1: Performing full reset
    [ 9.280000] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    [ 9.280000] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
    [ 9.280000] usb usb3: default language 0x0409
    [ 9.280000] usb usb3: uevent
    [ 9.281000] usb usb3: usb_probe_device
    [ 9.281000] usb usb3: configuration #1 chosen from 1 choice
    [ 9.281000] usb usb3: adding 3-0:1.0 (config #1, interface 0)
    [ 9.281000] usb 3-0:1.0: uevent
    [ 9.281000] hub 3-0:1.0: usb_probe_interface
    [ 9.281000] hub 3-0:1.0: usb_probe_interface - got id
    [ 9.281000] hub 3-0:1.0: USB hub found
    [ 9.281000] hub 3-0:1.0: 2 ports detected
    [ 9.282000] hub 3-0:1.0: standalone hub
    [ 9.282000] hub 3-0:1.0: no power switching (usb 1.0)
    [ 9.282000] hub 3-0:1.0: individual port over-current protection
    [ 9.282000] hub 3-0:1.0: power on to power good time: 2ms
    [ 9.282000] hub 3-0:1.0: local power source is good
    [ 9.282000] hub 3-0:1.0: trying to enable port power on non-switchable hub
    [ 9.328500] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
    [ 9.328500] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
    [ 9.328500] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
    [ 9.379500] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
    [ 9.379500] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
    [ 9.379500] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
    [ 9.383500] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    [ 9.383000] drivers/usb/core/inode.c: creating file '001'
    [ 9.383000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [ 9.383000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 9.383000] usb usb3: Product: UHCI Host Controller
    [ 9.383000] usb usb3: Manufacturer: Linux 2.6.26-tip-03923-g2c96bcb-dirty uhci_hcd
    [ 9.383000] usb usb3: SerialNumber: 0000:00:1d.1
    [ 9.384000] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
    [ 9.384000] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 9.384000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
    [ 9.385000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 9.385000] drivers/usb/core/inode.c: creating file '004'
    [ 9.385000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 9.386000] uhci_hcd 0000:00:1d.2: detected 2 ports
    [ 9.386000] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    [ 9.386000] uhci_hcd 0000:00:1d.2: Performing full reset
    [ 9.387000] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    [ 9.387000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    [ 9.387000] usb usb4: default language 0x0409
    [ 9.387000] usb usb4: uevent
    [ 9.387000] usb usb4: usb_probe_device
    [ 9.387000] usb usb4: configuration #1 chosen from 1 choice
    [ 9.387000] usb usb4: adding 4-0:1.0 (config #1, interface 0)
    [ 9.388000] usb 4-0:1.0: uevent
    [ 9.388000] hub 4-0:1.0: usb_probe_interface
    [ 9.388000] hub 4-0:1.0: usb_probe_interface - got id
    [ 9.388000] hub 4-0:1.0: USB hub found
    [ 9.388000] hub 4-0:1.0: 2 ports detected
    [ 9.388000] hub 4-0:1.0: standalone hub
    [ 9.388000] hub 4-0:1.0: no power switching (usb 1.0)
    [ 9.388000] hub 4-0:1.0: individual port over-current protection
    [ 9.389000] hub 4-0:1.0: power on to power good time: 2ms
    [ 9.389000] hub 4-0:1.0: local power source is good
    [ 9.389000] hub 4-0:1.0: trying to enable port power on non-switchable hub
    [ 9.490500] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
    [ 9.490000] drivers/usb/core/inode.c: creating file '001'
    [ 9.490000] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [ 9.490000] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 9.490000] usb usb4: Product: UHCI Host Controller
    [ 9.490000] usb usb4: Manufacturer: Linux 2.6.26-tip-03923-g2c96bcb-dirty uhci_hcd
    [ 9.490000] usb usb4: SerialNumber: 0000:00:1d.2
    [ 9.491000] Pin 1-19 already programmed
    [ 9.491000] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 9.491000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
    [ 9.491000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 9.491000] drivers/usb/core/inode.c: creating file '005'
    [ 9.491000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 9.492000] uhci_hcd 0000:00:1d.3: detected 2 ports
    [ 9.492000] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
    [ 9.492000] uhci_hcd 0000:00:1d.3: Performing full reset
    [ 9.492000] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
    [ 9.492000] usb usb5: default language 0x0409
    [ 9.492000] usb usb5: uevent
    [ 9.493000] usb usb5: usb_probe_device
    [ 9.493000] usb usb5: configuration #1 chosen from 1 choice
    [ 9.493000] usb usb5: adding 5-0:1.0 (config #1, interface 0)
    [ 9.493000] usb 5-0:1.0: uevent
    [ 9.493000] hub 5-0:1.0: usb_probe_interface
    [ 9.493000] hub 5-0:1.0: usb_probe_interface - got id
    [ 9.493000] hub 5-0:1.0: USB hub found
    [ 9.493000] hub 5-0:1.0: 2 ports detected
    [ 9.494000] hub 5-0:1.0: standalone hub
    [ 9.494000] hub 5-0:1.0: no power switching (usb 1.0)
    [ 9.494000] hub 5-0:1.0: individual port over-current protection
    [ 9.494000] hub 5-0:1.0: power on to power good time: 2ms
    [ 9.494000] hub 5-0:1.0: local power source is good
    [ 9.494000] hub 5-0:1.0: trying to enable port power on non-switchable hub
    [ 9.595500] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
    [ 9.595000] drivers/usb/core/inode.c: creating file '001'
    [ 9.595500] uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00
    [ 9.595500] hub 5-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    [ 9.595000] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [ 9.595000] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 9.595000] usb usb5: Product: UHCI Host Controller
    [ 9.596000] usb usb5: Manufacturer: Linux 2.6.26-tip-03923-g2c96bcb-dirty uhci_hcd
    [ 9.596000] usb usb5: SerialNumber: 0000:00:1d.3
    [ 9.596000] initcall uhci_hcd_init+0x0/0xc6 returned 0 after 405 msecs
    [ 9.596000] calling sl811h_init+0x0/0x3d
    [ 9.596000] sl811: driver sl811-hcd, 19 May 2005
    [ 9.596000] initcall sl811h_init+0x0/0x3d returned 0 after 0 msecs
    [ 9.597000] calling acm_init+0x0/0xd7
    [ 9.699500] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    [ 9.801500] usb 5-2: new full speed USB device using uhci_hcd and address 2
    [ 9.922000] usb 5-2: ep0 maxpacket = 8
    [ 9.949000] usb 5-2: default language 0x0409
    [ 9.971000] usb 5-2: uevent
    [ 9.971000] usb 5-2: usb_probe_device
    [ 9.971000] usb 5-2: configuration #1 chosen from 1 choice
    [ 9.974000] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
    [ 9.974000] usb 5-2:1.0: uevent
    [ 9.975000] drivers/usb/core/inode.c: creating file '002'
    [ 9.975000] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
    [ 9.975000] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 9.975000] usb 5-2: Product: Biometric Coprocessor
    [ 9.976000] usb 5-2: Manufacturer: STMicroelectronics
    [ 9.976000] usbcore: registered new interface driver cdc_acm
    [ 9.976000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
    [ 9.976000] initcall acm_init+0x0/0xd7 returned 0 after 361 msecs
    [ 9.976000] calling usblp_init+0x0/0x1b
    [ 9.976000] usbcore: registered new interface driver usblp
    [ 9.977000] initcall usblp_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.977000] calling adu_init+0x0/0x80
    [ 9.977000] drivers/usb/misc/adutux.c : adu_init : enter
    [ 9.977000] usbcore: registered new interface driver adutux
    [ 9.977000] adutux: adutux adutux (see www.ontrak.net) v0.0.13
    [ 9.977000] adutux: adutux is an experimental driver. Use at your own risk
    [ 9.977000] drivers/usb/misc/adutux.c : adu_init : leave, return value 0
    [ 9.978000] initcall adu_init+0x0/0x80 returned 0 after 0 msecs
    [ 9.978000] calling appledisplay_init+0x0/0x53
    [ 9.978000] usbcore: registered new interface driver appledisplay
    [ 9.978000] initcall appledisplay_init+0x0/0x53 returned 0 after 0 msecs
    [ 9.978000] calling berry_init+0x0/0x1b
    [ 9.978000] usbcore: registered new interface driver berry_charge
    [ 9.979000] initcall berry_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.979000] calling usb_cytherm_init+0x0/0x41
    [ 9.979000] usbcore: registered new interface driver cytherm
    [ 9.979000] cytherm: v1.0:Cypress USB Thermometer driver
    [ 9.979000] initcall usb_cytherm_init+0x0/0x41 returned 0 after 0 msecs
    [ 9.979000] calling emi62_init+0x0/0x32
    [ 9.980000] usbcore: registered new interface driver emi62 - firmware loader
    [ 9.980000] initcall emi62_init+0x0/0x32 returned 0 after 0 msecs
    [ 9.980000] calling usb_idmouse_init+0x0/0x3f
    [ 9.980000] idmouse: Siemens ID Mouse FingerTIP Sensor Driver 0.6
    [ 9.980000] usbcore: registered new interface driver idmouse
    [ 9.980000] initcall usb_idmouse_init+0x0/0x3f returned 0 after 0 msecs
    [ 9.980000] calling usb_lcd_init+0x0/0x34
    [ 9.981000] usbcore: registered new interface driver usblcd
    [ 9.981000] initcall usb_lcd_init+0x0/0x34 returned 0 after 0 msecs
    [ 9.981000] calling usb_led_init+0x0/0x34
    [ 9.981000] usbcore: registered new interface driver usbled
    [ 9.981000] initcall usb_led_init+0x0/0x34 returned 0 after 0 msecs
    [ 9.982000] calling lego_usb_tower_init+0x0/0x7a
    [ 9.982000] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter
    [ 9.982000] usbcore: registered new interface driver legousbtower
    [ 9.982000] legousbtower: LEGO USB Tower Driver v0.96
    [ 9.982000] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0
    [ 9.982000] initcall lego_usb_tower_init+0x0/0x7a returned 0 after 0 msecs
    [ 9.982000] calling usb_rio_init+0x0/0x32
    [ 9.983000] usbcore: registered new interface driver rio500
    [ 9.983000] rio500: v1.1:USB Rio 500 driver
    [ 9.983000] initcall usb_rio_init+0x0/0x32 returned 0 after 0 msecs
    [ 9.983000] calling usbtest_init+0x0/0x40
    [ 9.983000] usbtest 5-2:1.0: usb_probe_interface
    [ 9.983000] usbtest 5-2:1.0: usb_probe_interface - got id
    [ 9.983000] usbcore: registered new interface driver usbtest
    [ 9.984000] initcall usbtest_init+0x0/0x40 returned 0 after 0 msecs
    [ 9.984000] calling cxacru_init+0x0/0x1b
    [ 9.984000] usbcore: registered new interface driver cxacru
    [ 9.984000] initcall cxacru_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.984000] calling usbatm_usb_init+0x0/0x61
    [ 9.984000] drivers/usb/atm/usbatm.c: usbatm_usb_init: driver version 1.10
    [ 9.984000] initcall usbatm_usb_init+0x0/0x61 returned 0 after 0 msecs
    [ 9.985000] calling init+0x0/0x1b
    [ 9.985000] initcall init+0x0/0x1b returned 0 after 0 msecs
    [ 9.985000] calling gs_module_init+0x0/0x11c
    [ 9.985000] gs_module_init: cannot register gadget driver, ret=-19
    [ 9.985000] initcall gs_module_init+0x0/0x11c returned -19 after 0 msecs
    [ 9.985000] calling i8042_init+0x0/0x2db
    [ 9.986000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 9.994000] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 9.994000] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 9.995000] initcall i8042_init+0x0/0x2db returned 0 after 8 msecs
    [ 9.995000] calling ct82c710_init+0x0/0x172
    [ 9.995000] initcall ct82c710_init+0x0/0x172 returned -19 after 0 msecs
    [ 9.995000] calling pcips2_init+0x0/0x1b
    [ 9.995000] initcall pcips2_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.996000] calling mousedev_init+0x0/0x7d
    [ 9.996500] mice: PS/2 mouse device common for all mice
    [ 9.996500] initcall mousedev_init+0x0/0x7d returned 0 after 0 msecs
    [ 9.996500] calling atkbd_init+0x0/0x1b
    [ 9.996500] initcall atkbd_init+0x0/0x1b returned 0 after 0 msecs
    [ 9.997500] calling lkkbd_init+0x0/0x1b
    [ 10.002000] input: AT Translated Set 2 keyboard as /class/input/input3
    [ 10.008500] initcall lkkbd_init+0x0/0x1b returned 0 after 10 msecs
    [ 10.008500] calling nkbd_init+0x0/0x1b
    [ 10.008500] initcall nkbd_init+0x0/0x1b returned 0 after 0 msecs
    [ 10.008500] calling gpio_keys_init+0x0/0x14
    [ 10.008500] initcall gpio_keys_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.008500] calling joydump_init+0x0/0x18
    [ 10.009500] initcall joydump_init+0x0/0x18 returned 0 after 0 msecs
    [ 10.009500] calling magellan_init+0x0/0x1b
    [ 10.009500] initcall magellan_init+0x0/0x1b returned 0 after 0 msecs
    [ 10.009500] calling stinger_init+0x0/0x1b
    [ 10.010500] initcall stinger_init+0x0/0x1b returned 0 after 0 msecs
    [ 10.010500] calling tgfx_init+0x0/0x38d
    [ 10.010500] initcall tgfx_init+0x0/0x38d returned -19 after 0 msecs
    [ 10.011500] calling usb_xpad_init+0x0/0x32
    [ 10.011500] usbcore: registered new interface driver xpad
    [ 10.011500] xpad: X-Box pad driver
    [ 10.011500] initcall usb_xpad_init+0x0/0x32 returned 0 after 0 msecs
    [ 10.011500] calling usb_acecad_init+0x0/0x32
    [ 10.011500] usbcore: registered new interface driver usb_acecad
    [ 10.011500] acecad: v3.2:USB Acecad Flair tablet driver
    [ 10.012500] initcall usb_acecad_init+0x0/0x32 returned 0 after 0 msecs
    [ 10.012500] calling aiptek_init+0x0/0x3d
    [ 10.012500] usbcore: registered new interface driver aiptek
    [ 10.012500] aiptek: v2.3 (May 2, 2007): Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
    [ 10.012500] aiptek: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
    [ 10.012500] initcall aiptek_init+0x0/0x3d returned 0 after 0 msecs
    [ 10.012500] calling gtco_init+0x0/0x40
    [ 10.013500] usbcore: registered new interface driver gtco
    [ 10.013500] GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x40 returned 0 after 0 msecs
    [ 10.013500] calling kbtab_init+0x0/0x32
    [ 10.013500] usbcore: registered new interface driver kbtab
    [ 10.013500] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
    [ 10.013500] initcall kbtab_init+0x0/0x32 returned 0 after 0 msecs
    [ 10.014500] calling pcwd_init_module+0x0/0x19
    [ 10.015500] initcall pcwd_init_module+0x0/0x19 returned -19 after 0 msecs
    [ 10.015500] calling acq_init+0x0/0x5b
    [ 10.015500] WDT driver for Acquire single board computer initialising.
    [ 10.015500] acquirewdt: I/O address 0x0043 already in use
    [ 10.015500] acquirewdt: probe of acquirewdt failed with error -5
    [ 10.015500] initcall acq_init+0x0/0x5b returned 0 after 0 msecs
    [ 10.015500] calling sc520_wdt_init+0x0/0xd5
    [ 10.016500] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=1)
    [ 10.016500] initcall sc520_wdt_init+0x0/0xd5 returned 0 after 0 msecs
    [ 10.016500] calling ibwdt_init+0x0/0x5b
    [ 10.016500] ib700wdt: WDT driver for IB700 single board computer initialising.
    [ 10.016500] ib700wdt: failed to register misc device
    [ 10.017500] ib700wdt: probe of ib700wdt failed with error -16
    [ 10.017500] initcall ibwdt_init+0x0/0x5b returned 0 after 0 msecs
    [ 10.017500] calling sbc7240_wdt_init+0x0/0xfa
    [ 10.017500] sbc7240_wdt: timeout set to 30 seconds
    [ 10.017500] sbc7240_wdt: cannot register miscdev on minor=130 (err=-16)
    [ 10.017500] initcall sbc7240_wdt_init+0x0/0xfa returned -16 after 0 msecs
    [ 10.017500] initcall sbc7240_wdt_init+0x0/0xfa returned with error code -16
    [ 10.017500] calling w83877f_wdt_init+0x0/0x13c
    [ 10.018500] w83877f_wdt: cannot register miscdev on minor=130 (err=-16)
    [ 10.018500] initcall w83877f_wdt_init+0x0/0x13c returned -16 after 0 msecs
    [ 10.018500] initcall w83877f_wdt_init+0x0/0x13c returned with error code -16
    [ 10.018500] calling telephony_init+0x0/0x44
    [ 10.018500] Linux telephony interface: v1.00
    [ 10.018500] initcall telephony_init+0x0/0x44 returned 0 after 0 msecs
    [ 10.018500] calling isdn_init+0x0/0x267
    [ 10.019500] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/none/1.1.2.2
    [ 10.019500] initcall isdn_init+0x0/0x267 returned 0 after 0 msecs
    [ 10.019500] calling divert_init+0x0/0x5e
    [ 10.019500] dss1_divert module successfully installed
    [ 10.019500] initcall divert_init+0x0/0x5e returned 0 after 0 msecs
    [ 10.020500] calling HiSax_init+0x0/0x303
    [ 10.020500] HiSax: Linux Driver for passive ISDN cards
    [ 10.020500] HiSax: Version 3.5 (kernel)
    [ 10.020500] HiSax: Layer1 Revision 2.46.2.5
    [ 10.020500] HiSax: Layer2 Revision 2.30.2.4
    [ 10.020500] HiSax: TeiMgr Revision 2.20.2.3
    [ 10.020500] HiSax: Layer3 Revision 2.22.2.3
    [ 10.020500] HiSax: LinkLayer Revision 2.59.2.4
    [ 10.020500] HiSax: Total 1 card defined
    [ 10.020500] HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
    [ 10.021500] HiSax: Niccy driver Rev. 1.21.2.4
    [ 10.021500] Niccy: io0 0 and NO_PCI_BIOS
    [ 10.021500] Niccy: unable to config NICCY PCI
    [ 10.021500] HiSax: Card NICCY not installed !
    [ 10.021500] initcall HiSax_init+0x0/0x303 returned -19 after 0 msecs
    [ 10.021500] calling act2000_init+0x0/0x57
    [ 10.021500] IBM Active 2000 ISDN driver
    [ 10.021500] act2000: No cards defined yet
    [ 10.021500] initcall act2000_init+0x0/0x57 returned 0 after 0 msecs
    [ 10.022500] calling init+0x0/0x1e8
    [ 10.022500] lguest: mapped switcher at ffc00000
    [ 10.022500] initcall init+0x0/0x1e8 returned 0 after 0 msecs
    [ 10.022500] calling mmc_blk_init+0x0/0x27
    [ 10.022500] initcall mmc_blk_init+0x0/0x27 returned 0 after 0 msecs
    [ 10.023500] calling mmc_test_init+0x0/0x14
    [ 10.023500] initcall mmc_test_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.023500] calling sdio_uart_init+0x0/0xcb
    [ 10.023500] initcall sdio_uart_init+0x0/0xcb returned 0 after 0 msecs
    [ 10.023500] calling tifm_sd_init+0x0/0x14
    [ 10.023500] initcall tifm_sd_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.024500] calling memstick_init+0x0/0x72
    [ 10.024500] initcall memstick_init+0x0/0x72 returned 0 after 0 msecs
    [ 10.024500] calling mspro_block_init+0x0/0x68
    [ 10.024500] initcall mspro_block_init+0x0/0x68 returned 0 after 0 msecs
    [ 10.024500] calling tifm_ms_init+0x0/0x14
    [ 10.025500] initcall tifm_ms_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.025500] calling gpio_led_init+0x0/0x14
    [ 10.025500] Registered led device: rdc:dmz
    [ 10.025500] initcall gpio_led_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.025500] calling dcdbas_init+0x0/0x58
    [ 10.026500] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 10.026500] initcall dcdbas_init+0x0/0x58 returned 0 after 0 msecs
    [ 10.026500] calling sysctl_core_init+0x0/0x14
    [ 10.026500] initcall sysctl_core_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.026500] calling flow_cache_init+0x0/0x14d
    [ 10.026500] initcall flow_cache_init+0x0/0x14d returned 0 after 0 msecs
    [ 10.027500] calling pg_init+0x0/0x254
    [ 10.027500] pktgen v2.69: Packet Generator for packet performance testing.
    [ 10.027500] initcall pg_init+0x0/0x254 returned 0 after 0 msecs
    [ 10.027500] calling llc_init+0x0/0x20
    [ 10.027500] initcall llc_init+0x0/0x20 returned 0 after 0 msecs
    [ 10.027500] calling snap_init+0x0/0x2f
    [ 10.027500] initcall snap_init+0x0/0x2f returned 0 after 0 msecs
    [ 10.028500] calling nfnetlink_init+0x0/0x54
    [ 10.028500] Netfilter messages via NETLINK v0.30.
    [ 10.028500] initcall nfnetlink_init+0x0/0x54 returned 0 after 0 msecs
    [ 10.028500] calling nfnetlink_queue_init+0x0/0x8c
    [ 10.028500] initcall nfnetlink_queue_init+0x0/0x8c returned 0 after 0 msecs
    [ 10.028500] calling nf_conntrack_standalone_init+0x0/0xa0
    [ 10.028500] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 10.028500] initcall nf_conntrack_standalone_init+0x0/0xa0 returned 0 after 0 msecs
    [ 10.029500] calling nf_conntrack_tftp_init+0x0/0x154
    [ 10.029500] initcall nf_conntrack_tftp_init+0x0/0x154 returned 0 after 0 msecs
    [ 10.029500] calling xt_init+0x0/0x83
    [ 10.029500] initcall xt_init+0x0/0x83 returned 0 after 0 msecs
    [ 10.029500] calling tcpudp_mt_init+0x0/0x19
    [ 10.029500] initcall tcpudp_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.030500] calling xt_rateest_tg_init+0x0/0x3b
    [ 10.030500] initcall xt_rateest_tg_init+0x0/0x3b returned 0 after 0 msecs
    [ 10.030500] calling tcpmss_tg_init+0x0/0x19
    [ 10.030500] initcall tcpmss_tg_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.030500] calling comment_mt_init+0x0/0x19
    [ 10.030500] initcall comment_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.030500] calling connmark_mt_init+0x0/0x19
    [ 10.030500] initcall connmark_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.031500] calling dscp_mt_init+0x0/0x19
    [ 10.031500] initcall dscp_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.031500] calling iprange_mt_init+0x0/0x19
    [ 10.031500] initcall iprange_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.031500] calling xt_rateest_mt_init+0x0/0x19
    [ 10.031500] initcall xt_rateest_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.031500] calling sctp_mt_init+0x0/0x19
    [ 10.031500] initcall sctp_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.032500] calling state_mt_init+0x0/0x19
    [ 10.032500] initcall state_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.032500] calling u32_mt_init+0x0/0x19
    [ 10.032500] initcall u32_mt_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.032500] calling sysctl_ipv4_init+0x0/0x44
    [ 10.032500] initcall sysctl_ipv4_init+0x0/0x44 returned 0 after 0 msecs
    [ 10.032500] calling ah4_init+0x0/0x5f
    [ 10.032500] initcall ah4_init+0x0/0x5f returned 0 after 0 msecs
    [ 10.033500] calling esp4_init+0x0/0x5f
    [ 10.033500] initcall esp4_init+0x0/0x5f returned 0 after 0 msecs
    [ 10.033500] calling ipcomp4_init+0x0/0x5f
    [ 10.033500] initcall ipcomp4_init+0x0/0x5f returned 0 after 0 msecs
    [ 10.033500] calling ipip_init+0x0/0x8d
    [ 10.033500] initcall ipip_init+0x0/0x8d returned 0 after 0 msecs
    [ 10.033500] calling tunnel4_init+0x0/0x5f
    [ 10.033500] initcall tunnel4_init+0x0/0x5f returned 0 after 0 msecs
    [ 10.034500] calling xfrm4_mode_tunnel_init+0x0/0x19
    [ 10.034500] initcall xfrm4_mode_tunnel_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.034500] calling ipv4_netfilter_init+0x0/0x14
    [ 10.034500] initcall ipv4_netfilter_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.034500] calling arp_tables_init+0x0/0x7d
    [ 10.034500] arp_tables: (C) 2002 David S. Miller
    [ 10.034500] initcall arp_tables_init+0x0/0x7d returned 0 after 0 msecs
    [ 10.035500] calling arpt_mangle_init+0x0/0x14
    [ 10.035500] initcall arpt_mangle_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.035500] calling arptable_filter_init+0x0/0x3d
    [ 10.035500] initcall arptable_filter_init+0x0/0x3d returned 0 after 0 msecs
    [ 10.035500] calling ip_queue_init+0x0/0x111
    [ 10.035500] initcall ip_queue_init+0x0/0x111 returned 0 after 0 msecs
    [ 10.035500] calling cubictcp_register+0x0/0x98
    [ 10.035500] TCP cubic registered
    [ 10.036500] initcall cubictcp_register+0x0/0x98 returned 0 after 0 msecs
    [ 10.036500] calling xfrm_user_init+0x0/0x56
    [ 10.036500] Initializing XFRM netlink socket
    [ 10.037500] initcall xfrm_user_init+0x0/0x56 returned 0 after 0 msecs
    [ 10.037500] calling inet6_init+0x0/0x2ee
    [ 10.037500] NET: Registered protocol family 10
    [ 10.039500] initcall inet6_init+0x0/0x2ee returned 0 after 1 msecs
    [ 10.039500] calling esp6_init+0x0/0x5f
    [ 10.039500] initcall esp6_init+0x0/0x5f returned 0 after 0 msecs
    [ 10.039500] calling ipcomp6_init+0x0/0x5f
    [ 10.040500] initcall ipcomp6_init+0x0/0x5f returned 0 after 0 msecs
    [ 10.040500] calling xfrm6_tunnel_init+0x0/0xe0
    [ 10.040500] initcall xfrm6_tunnel_init+0x0/0xe0 returned 0 after 0 msecs
    [ 10.040500] calling tunnel6_init+0x0/0x5f
    [ 10.040500] initcall tunnel6_init+0x0/0x5f returned 0 after 0 msecs
    [ 10.040500] calling xfrm6_transport_init+0x0/0x19
    [ 10.040500] initcall xfrm6_transport_init+0x0/0x19 returned 0 after 0 msecs
    [ 10.040500] calling ip6_queue_init+0x0/0x111
    [ 10.041500] initcall ip6_queue_init+0x0/0x111 returned 0 after 0 msecs
    [ 10.041500] calling ip6_tunnel_init+0x0/0x91
    [ 10.041500] ------------[ cut here ]------------
    [ 10.041500] WARNING: at net/core/dst.c:265 dst_release+0x24/0x2b()
    [ 10.041500] Modules linked in:
    [ 10.042500] Pid: 7, comm: ksoftirqd/1 Not tainted 2.6.26-tip-03923-g2c96bcb-dirty #3134
    [ 10.042500] [] warn_on_slowpath+0x46/0x6a
    [ 10.042500] [] ? put_lock_stats+0xd/0x21
    [ 10.042500] [] ? __lock_acquire+0x5ba/0x618
    [ 10.042500] [] ? put_lock_stats+0xd/0x21
    [ 10.042500] [] dst_release+0x24/0x2b
    [ 10.043500] [] skb_release_all+0x13/0x83
    [ 10.043500] [] __kfree_skb+0x10/0x6b
    [ 10.043500] [] net_tx_action+0x6e/0xee
    [ 10.043500] [] __do_softirq+0x7a/0xe8
    [ 10.043500] [] ? __do_softirq+0x0/0xe8
    [ 10.043500] [] do_softirq+0x79/0xba
    [ 10.043500] [] ksoftirqd+0x88/0x13b
    [ 10.044500] [] ? ksoftirqd+0x0/0x13b
    [ 10.044500] [] kthread+0x40/0x67
    [ 10.044500] [] ? kthread+0x0/0x67
    [ 10.044500] [] kernel_thread_helper+0x7/0x10
    [ 10.044500] =======================
    [ 10.044500] ---[ end trace 96563eea573244e7 ]---
    [ 10.044500] Attempt to release alive inet socket f6fac040
    [ 10.045500] initcall ip6_tunnel_init+0x0/0x91 returned 0 after 3 msecs
    [ 10.045500] calling packet_init+0x0/0x3e
    [ 10.045500] NET: Registered protocol family 17
    [ 10.045500] initcall packet_init+0x0/0x3e returned 0 after 0 msecs
    [ 10.045500] calling br_init+0x0/0xb1
    [ 10.045500] initcall br_init+0x0/0xb1 returned 0 after 0 msecs
    [ 10.045500] calling ipx_init+0x0/0xd7
    [ 10.046500] NET: Registered protocol family 4
    [ 10.046500] initcall ipx_init+0x0/0xd7 returned 0 after 0 msecs
    [ 10.046500] calling atm_clip_init+0x0/0x95
    [ 10.046500] initcall atm_clip_init+0x0/0x95 returned 0 after 0 msecs
    [ 10.046500] calling econet_proto_init+0x0/0x190
    [ 10.046500] NET: Registered protocol family 19
    [ 10.046500] initcall econet_proto_init+0x0/0x190 returned 0 after 0 msecs
    [ 10.046500] calling ieee80211_init+0x0/0x20
    [ 10.047500] ieee80211: 802.11 data/management/control stack, git-1.1.13
    [ 10.047500] ieee80211: Copyright (C) 2004-2005 Intel Corporation
    [ 10.047500] initcall ieee80211_init+0x0/0x20 returned 0 after 0 msecs
    [ 10.047500] calling ieee80211_crypto_init+0x0/0x14
    [ 10.047500] ieee80211_crypt: registered algorithm 'NULL'
    [ 10.047500] initcall ieee80211_crypto_init+0x0/0x14 returned 0 after 0 msecs
    [ 10.047500] calling update_mp_table+0x0/0x400
    [ 10.047500] initcall update_mp_table+0x0/0x400 returned 0 after 0 msecs
    [ 10.048500] calling lapic_insert_resource+0x0/0x49
    [ 10.048500] initcall lapic_insert_resource+0x0/0x49 returned 0 after 0 msecs
    [ 10.048500] calling init_lapic_nmi_sysfs+0x0/0x38
    [ 10.048500] initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs
    [ 10.048500] calling io_apic_bug_finalize+0x0/0x1f
    [ 10.048500] initcall io_apic_bug_finalize+0x0/0x1f returned 0 after 0 msecs
    [ 10.048500] calling balanced_irq_init+0x0/0x147
    [ 10.048500] Starting balanced_irq
    [ 10.049500] initcall balanced_irq_init+0x0/0x147 returned 0 after 0 msecs
    [ 10.049500] calling check_early_ioremap_leak+0x0/0x3d
    [ 10.049500] initcall check_early_ioremap_leak+0x0/0x3d returned 0 after 0 msecs
    [ 10.049500] calling print_ipi_mode+0x0/0x2a
    [ 10.049500] Using IPI No-Shortcut mode
    [ 10.049500] initcall print_ipi_mode+0x0/0x2a returned 0 after 0 msecs
    [ 10.049500] calling init_oops_id+0x0/0x28
    [ 10.049500] initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs
    [ 10.050500] calling disable_boot_consoles+0x0/0x3b
    [ 10.050500] initcall disable_boot_consoles+0x0/0x3b returned 0 after 0 msecs
    [ 10.050500] calling pm_qos_power_init+0x0/0x59
    [ 10.050500] initcall pm_qos_power_init+0x0/0x59 returned 0 after 0 msecs
    [ 10.050500] calling debugfs_kprobe_init+0x0/0x7d
    [ 10.050500] initcall debugfs_kprobe_init+0x0/0x7d returned 0 after 0 msecs
    [ 10.051500] calling taskstats_init+0x0/0x82
    [ 10.051500] registered taskstats version 1
    [ 10.051500] initcall taskstats_init+0x0/0x82 returned 0 after 0 msecs
    [ 10.051500] calling fail_page_alloc_debugfs+0x0/0xc6
    [ 10.051500] initcall fail_page_alloc_debugfs+0x0/0xc6 returned 0 after 0 msecs
    [ 10.051500] calling fail_make_request_debugfs+0x0/0x19
    [ 10.052500] initcall fail_make_request_debugfs+0x0/0x19 returned 0 after 0 msecs
    [ 10.052500] calling random32_reseed+0x0/0x4e
    [ 10.052500] initcall random32_reseed+0x0/0x4e returned 0 after 0 msecs
    [ 10.052500] calling pci_sysfs_init+0x0/0x49
    [ 10.052500] initcall pci_sysfs_init+0x0/0x49 returned 0 after 0 msecs
    [ 10.052500] calling acpi_wakeup_device_init+0x0/0x9f
    [ 10.053500] initcall acpi_wakeup_device_init+0x0/0x9f returned 0 after 0 msecs
    [ 10.053500] calling acpi_sleep_proc_init+0x0/0x93
    [ 10.053500] initcall acpi_sleep_proc_init+0x0/0x93 returned 0 after 0 msecs
    [ 10.053500] calling seqgen_init+0x0/0x13
    [ 10.053500] initcall seqgen_init+0x0/0x13 returned 0 after 0 msecs
    [ 10.053500] calling hd_init+0x0/0x2a0
    [ 10.053500] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
    [ 10.054500] initcall hd_init+0x0/0x2a0 returned -1 after 0 msecs
    [ 10.054500] initcall hd_init+0x0/0x2a0 returned with error code -1
    [ 10.054500] calling scsi_complete_async_scans+0x0/0xd2
    [ 10.054500] initcall scsi_complete_async_scans+0x0/0xd2 returned 0 after 0 msecs
    [ 10.054500] calling tcp_congestion_default+0x0/0x14
    [ 10.054500] initcall tcp_congestion_default+0x0/0x14 returned 0 after 0 msecs
    [ 10.054500] calling ip_auto_config+0x0/0xc8b
    [ 10.054500] initcall ip_auto_config+0x0/0xc8b returned 0 after 0 msecs
    [ 10.085500] kjournald starting. Commit interval 5 seconds
    [ 10.085000] EXT3-fs: mounted filesystem with ordered data mode.
    [ 10.085000] VFS: Mounted root (ext3 filesystem) readonly.
    [ 10.086000] Freeing unused kernel memory: 652k freed
    [ 10.454000] usb usb2: suspend_rh (auto-stop)
    [ 10.454000] usb usb3: suspend_rh (auto-stop)
    [ 10.704000] usb usb4: suspend_rh (auto-stop)
    [ 13.522500] usb usb2: uevent
    [ 13.522500] usb 2-0:1.0: uevent
    [ 13.522500] usb usb3: uevent
    [ 13.522500] usb 3-0:1.0: uevent
    [ 13.523500] usb usb4: uevent
    [ 13.523500] usb 4-0:1.0: uevent
    [ 13.523500] usb usb5: uevent
    [ 13.523500] usb 5-0:1.0: uevent
    [ 13.523500] usb 5-2: uevent
    [ 13.523500] usb 5-2:1.0: uevent
    [ 13.523500] usb usb1: uevent
    [ 13.524500] usb 1-0:1.0: uevent
    [ 19.394000] Attempt to release alive inet socket f6fac040
    [ 20.389000] EXT3 FS on sda1, internal journal
    [ 20.764500] eth0: no IPv6 routers present
    [ 22.460000] warning: process `kudzu' used the deprecated sysctl system call with 1.23.
    [ 22.933000] ------------[ cut here ]------------
    [ 22.933000] kernel BUG at mm/slab.c:2927!
    [ 22.933000] invalid opcode: 0000 [#1] PREEMPT SMP
    [ 22.933000] Modules linked in:
    [ 22.933000]
    [ 22.933000] Pid: 1796, comm: ip6tables-resto Tainted: G W (2.6.26-tip-03923-g2c96bcb-dirty #3134)
    [ 22.933000] EIP: 0060:[] EFLAGS: 00010046 CPU: 0
    [ 22.933000] EIP is at cache_alloc_refill+0xfa/0x431
    [ 22.933000] EAX: 00000004 EBX: f6684800 ECX: f6f806c0 EDX: f6fa3c40
    [ 22.933000] ESI: f6fac000 EDI: 0000000b EBP: f6badec4 ESP: f6bade70
    [ 22.933000] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
    [ 22.933000] Process ip6tables-resto (pid: 1796, ti=f6bad000 task=f67ac060 task.ti=f6bad000)
    [ 22.933000] Stack: 00000004 00000004 000000d0 000000d0 f6f806c8 f6f806d0 f6fac01c 000080d0
    [ 22.933000] f6fa3c40 f6fa9800 f6f806c0 00000000 7f430025 b014a3e9 b2bd6a80 00000000
    [ 22.933000] 00000000 00000000 00000246 f6fa3c40 f6fa3c40 f6badee4 b0187793 b07c11d6
    [ 22.933000] Call Trace:
    [ 22.933000] [] ? __wake_up_bit+0xc/0x37
    [ 22.933000] [] ? kmem_cache_alloc+0x53/0x98
    [ 22.933000] [] ? sk_prot_alloc+0x1e/0xa7
    [ 22.933000] [] ? cap_capable+0xa/0x2b
    [ 22.933000] [] ? sk_alloc+0x20/0xa3
    [ 22.933000] [] ? inet6_create+0x187/0x316
    [ 22.933000] [] ? __sock_create+0x15b/0x229
    [ 22.933000] [] ? sock_create+0x29/0x2e
    [ 22.933000] [] ? sys_socket+0x1e/0x42
    [ 22.933000] [] ? sys_socketcall+0x56/0x163
    [ 22.933000] [] ? resume_userspace+0x8/0x30
    [ 22.933000] [] ? sysenter_past_esp+0x78/0xb9
    [ 22.933000] =======================
    [ 22.933000] Code: bb 00 00 00 8b 45 d4 8b 30 39 c6 75 13 c7 40 50 01 00 00 00 8b 70 10 3b 75 c0 0f 84 94 00 00 00 8b 55 cc 8b 42 38 39 46 10 72 37 <0f> 0b eb fe 8b 0b 89 4d ac 8b 56 14 8b 45 cc 0f af 50 2c 03 56
    [ 22.933000] EIP: [] cache_alloc_refill+0xfa/0x431 SS:ESP 0068:f6bade70
    [ 22.933000] Kernel panic - not syncing: Fatal exception
    [ 22.933000] Pid: 1796, comm: ip6tables-resto Tainted: G D W 2.6.26-tip-03923-g2c96bcb-dirty #3134
    [ 22.933000] [] panic+0x4e/0xf7
    [ 22.933000] [] oops_end+0x70/0x94
    [ 22.933000] [] die+0x5c/0x64
    [ 22.933000] [] do_trap+0x83/0x8b
    [ 22.933000] [] ? do_invalid_op+0x0/0x7b
    [ 22.933000] [] do_invalid_op+0x71/0x7b
    [ 22.933000] [] ? cache_alloc_refill+0xfa/0x431
    [ 22.933000] [] ? kmap_atomic_prot+0x1f/0x1de
    [ 22.933000] [] ? touch_atime+0xa7/0xc1
    [ 22.933000] [] error_code+0x72/0x80
    [ 22.933000] [] ? cache_alloc_refill+0xfa/0x431
    [ 22.933000] [] ? __wake_up_bit+0xc/0x37
    [ 22.933000] [] kmem_cache_alloc+0x53/0x98
    [ 22.933000] [] sk_prot_alloc+0x1e/0xa7
    [ 22.933000] [] ? cap_capable+0xa/0x2b
    [ 22.933000] [] sk_alloc+0x20/0xa3
    [ 22.933000] [] inet6_create+0x187/0x316
    [ 22.933000] [] __sock_create+0x15b/0x229
    [ 22.933000] [] sock_create+0x29/0x2e
    [ 22.933000] [] sys_socket+0x1e/0x42
    [ 22.933000] [] sys_socketcall+0x56/0x163
    [ 22.933000] [] ? resume_userspace+0x8/0x30
    [ 22.933000] [] sysenter_past_esp+0x78/0xb9
    [ 22.933000] =======================
    [ 22.933000] ------------[ cut here ]------------
    [ 22.933000] WARNING: at kernel/smp.c:288 smp_call_function_mask+0x38/0x131()
    [ 22.933000] Modules linked in:
    [ 22.933000] Pid: 1796, comm: ip6tables-resto Tainted: G D W 2.6.26-tip-03923-g2c96bcb-dirty #3134
    [ 22.933000] [] warn_on_slowpath+0x46/0x6a
    [ 22.933000] [] ? wake_up_klogd+0x8/0x36
    [ 22.933000] [] ? release_console_sem+0x199/0x1a1
    [ 22.933000] [] ? vprintk+0x384/0x3a4
    [ 22.933000] [] ? _spin_unlock_irqrestore+0x3b/0x51
    [ 22.933000] [] ? twofish_dec_blk+0xd9/0x729
    [ 22.933000] [] ? sysenter_past_esp+0x78/0xb9
    [ 22.933000] [] ? printk+0x1a/0x1c
    [ 22.933000] [] ? touch_softlockup_watchdog+0x8/0x1d
    [ 22.933000] [] smp_call_function_mask+0x38/0x131
    [ 22.933000] [] ? stop_this_cpu+0x0/0x48
    [ 22.933000] [] ? printk+0x1a/0x1c
    [ 22.933000] [] ? show_trace_log_lvl+0x25/0x2d
    [ 22.933000] [] ? show_trace+0x15/0x19
    [ 22.933000] [] ? stop_this_cpu+0x0/0x48
    [ 22.933000] [] smp_call_function+0x2a/0x53
    [ 22.933000] [] native_smp_send_stop+0x20/0x4a
    [ 22.933000] [] panic+0x5b/0xf7
    [ 22.933000] [] oops_end+0x70/0x94
    [ 22.933000] [] die+0x5c/0x64
    [ 22.933000] [] do_trap+0x83/0x8b
    [ 22.933000] [] ? do_invalid_op+0x0/0x7b
    [ 22.933000] [] do_invalid_op+0x71/0x7b
    [ 22.933000] [] ? cache_alloc_refill+0xfa/0x431
    [ 22.933000] [] ? kmap_atomic_prot+0x1f/0x1de
    [ 22.933000] [] ? touch_atime+0xa7/0xc1
    [ 22.933000] [] error_code+0x72/0x80
    [ 22.933000] [] ? cache_alloc_refill+0xfa/0x431
    [ 22.933000] [] ? __wake_up_bit+0xc/0x37
    [ 22.933000] [] kmem_cache_alloc+0x53/0x98
    [ 22.933000] [] sk_prot_alloc+0x1e/0xa7
    [ 22.933000] [] ? cap_capable+0xa/0x2b
    [ 22.933000] [] sk_alloc+0x20/0xa3
    [ 22.933000] [] inet6_create+0x187/0x316
    [ 22.933000] [] __sock_create+0x15b/0x229
    [ 22.933000] [] sock_create+0x29/0x2e
    [ 22.933000] [] sys_socket+0x1e/0x42
    [ 22.933000] [] sys_socketcall+0x56/0x163
    [ 22.933000] [] ? resume_userspace+0x8/0x30
    [ 22.933000] [] sysenter_past_esp+0x78/0xb9
    [ 22.933000] =======================
    [ 22.933000] ---[ end trace 96563eea573244e7 ]---
    [ 22.933000] ------------[ cut here ]------------
    [ 22.933000] WARNING: at kernel/smp.c:214 smp_call_function_single+0x44/0xd5()
    [ 22.933000] Modules linked in:
    [ 22.933000] Pid: 1796, comm: ip6tables-resto Tainted: G D W 2.6.26-tip-03923-g2c96bcb-dirty #3134
    [ 22.933000] [] warn_on_slowpath+0x46/0x6a
    [ 22.933000] [] ? wake_up_klogd+0x8/0x36
    [ 22.933000] [] ? release_console_sem+0x199/0x1a1
    [ 22.933000] [] ? vprintk+0x384/0x3a4
    [ 22.933000] [] ? _spin_unlock_irqrestore+0x3b/0x51
    [ 22.933000] [] ? twofish_dec_blk+0xd9/0x729
    [ 22.933000] [] smp_call_function_single+0x44/0xd5
    [ 22.933000] [] ? stop_this_cpu+0x0/0x48
    [ 22.933000] [] ? printk+0x1a/0x1c
    [ 22.933000] [] ? touch_softlockup_watchdog+0x8/0x1d
    [ 22.933000] [] smp_call_function_mask+0x82/0x131
    [ 22.933000] [] ? stop_this_cpu+0x0/0x48
    [ 22.933000] [] ? printk+0x1a/0x1c
    [ 22.933000] [] ? show_trace_log_lvl+0x25/0x2d
    [ 22.933000] [] ? show_trace+0x15/0x19
    [ 22.933000] [] ? stop_this_cpu+0x0/0x48
    [ 22.933000] [] smp_call_function+0x2a/0x53
    [ 22.933000] [] native_smp_send_stop+0x20/0x4a
    [ 22.933000] [] panic+0x5b/0xf7
    [ 22.933000] [] oops_end+0x70/0x94
    [ 22.933000] [] die+0x5c/0x64
    [ 22.933000] [] do_trap+0x83/0x8b
    [ 22.933000] [] ? do_invalid_op+0x0/0x7b
    [ 22.933000] [] do_invalid_op+0x71/0x7b
    [ 22.933000] [] ? cache_alloc_refill+0xfa/0x431
    [ 22.933000] [] ? kmap_atomic_prot+0x1f/0x1de
    [ 22.933000] [] ? touch_atime+0xa7/0xc1
    [ 22.933000] [] error_code+0x72/0x80
    [ 22.933000] [] ? cache_alloc_refill+0xfa/0x431
    [ 22.933000] [] ? __wake_up_bit+0xc/0x37
    [ 22.933000] [] kmem_cache_alloc+0x53/0x98
    [ 22.933000] [] sk_prot_alloc+0x1e/0xa7
    [ 22.933000] [] ? cap_capable+0xa/0x2b
    [ 22.933000] [] sk_alloc+0x20/0xa3
    [ 22.933000] [] inet6_create+0x187/0x316
    [ 22.933000] [] __sock_create+0x15b/0x229
    [ 22.933000] [] sock_create+0x29/0x2e
    [ 22.933000] [] sys_socket+0x1e/0x42
    [ 22.933000] [] sys_socketcall+0x56/0x163
    [ 22.933000] [] ? resume_userspace+0x8/0x30
    [ 22.933000] [] sysenter_past_esp+0x78/0xb9
    [ 22.933000] =======================
    [ 22.933000] ---[ end trace 96563eea573244e7 ]---
    [ 22.933000] Rebooting in 1 seconds..[ 0.000000] Initializing cgroup subsys cpuset
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  13. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten


    update about this problem: just triggered another colorful crash, see
    below. This was with the 4K object dump patch already, maybe the dump
    gives a clue?

    The upstream base of this test kernel was v2.6.26-5253-g14b395e - i.e.
    post the big networking pull, but this problem predates it. (It first
    triggered after v2.6.26)

    All the crashes trigger in or close to networking code - not a single
    block IO DMA or other DMA crash happened so far, and no filesystem
    corruptions or anything like that which would signal hw trouble.

    Ingo

    ------------------>
    initcall sctp_init+0x0/0x697 returned 0 after 9 msecs
    calling powernowk8_init+0x0/0x6e
    initcall powernowk8_init+0x0/0x6e returned -19 after 0 msecs
    calling hpet_insert_resource+0x0/0x1e
    initcall hpet_insert_resource+0x0/0x1e returned 0 after 0 msecs
    calling lapic_insert_resource+0x0/0x44
    initcall lapic_insert_resource+0x0/0x44 returned 0 after 0 msecs
    calling init_lapic_nmi_sysfs+0x0/0x33
    initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 msecs
    ================================================== ===========================
    BUG skbuff_head_cache: Poison overwritten
    -----------------------------------------------------------------------------

    INFO: 0xf7ccc100-0xf7ccc103. First byte 0x0 instead of 0x6b
    INFO: Allocated in __alloc_skb+0x30/0x10e age=1 cpu=1 pid=1
    INFO: Freed in __kfree_skb+0x63/0x66 age=1 cpu=0 pid=0
    INFO: Slab 0xc1c34ca0 objects=16 used=1 fp=0xf7ccc100 flags=0x400000c3
    INFO: Object 0xf7ccc100 @offset=256 fp=0xf7ccc200

    Bytes b4 0xf7ccc0f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
    Object 0xf7ccc100: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk
    Object 0xf7ccc110: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc120: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc130: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc140: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc150: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc160: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc170: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc180: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc190: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc1a0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk�
    Redzone 0xf7ccc1b0: bb bb bb bb ����
    Padding 0xf7ccc1d8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
    Padding 0xf7ccc1e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
    Padding 0xf7ccc1f8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
    Pid: 1, comm: swapper Not tainted 2.6.26-tip #3261
    [] print_trailer+0xd1/0xd9
    [] check_bytes_and_report+0x73/0x8f
    [] check_object+0xa5/0x15a
    [] __slab_alloc+0x2fb/0x3c8
    [] kmem_cache_alloc+0x4b/0xa8
    [] ? __alloc_skb+0x30/0x10e
    [] ? __alloc_skb+0x30/0x10e
    [] __alloc_skb+0x30/0x10e
    [] alloc_skb+0xc/0xe
    [] find_skb+0x28/0x66
    [] netpoll_send_udp+0x2b/0x1cf
    [] ? _spin_lock_irqsave+0x4b/0x55
    [] write_msg+0x79/0xac
    [] ? write_msg+0x0/0xac
    [] __call_console_drivers+0x56/0x63
    [] _call_console_drivers+0x57/0x5b
    [] release_console_sem+0x112/0x1a5
    [] vprintk+0x344/0x35e
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  14. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    Hi.

    On Mon, Jul 21, 2008 at 12:52:45PM +0300, Pekka Enberg (penberg@cs.helsinki.fi) wrote:
    > On Mon, Jul 21, 2008 at 12:41 PM, Ingo Molnar wrote:
    > > update about this problem: just triggered another colorful crash, see
    > > below. This was with the 4K object dump patch already, maybe the dump
    > > gives a clue?

    >
    > ...to point out the obvious:
    >
    > > ================================================== ===========================
    > > BUG skbuff_head_cache: Poison overwritten
    > > -----------------------------------------------------------------------------
    > >
    > > INFO: 0xf7ccc100-0xf7ccc103. First byte 0x0 instead of 0x6b
    > > INFO: Allocated in __alloc_skb+0x30/0x10e age=1 cpu=1 pid=1
    > > INFO: Freed in __kfree_skb+0x63/0x66 age=1 cpu=0 pid=0
    > > INFO: Slab 0xc1c34ca0 objects=16 used=1 fp=0xf7ccc100 flags=0x400000c3
    > > INFO: Object 0xf7ccc100 @offset=256 fp=0xf7ccc200
    > >
    > > Bytes b4 0xf7ccc0f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
    > > Object 0xf7ccc100: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk

    >
    > Use after free where first four bytes are zeroed.


    Not that obvious...
    skb->next is cleared in lots of places, in xmit network helper
    for example, but since rest of the packet was not modified, it
    means given skb was not freed, so it will not help.

    Ingo do you see other similar dumps with last byte modified?
    That's the one which can help to determine the reason.

    --
    Evgeniy Polyakov
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  15. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten


    * Evgeniy Polyakov wrote:

    > Hi.
    >
    > On Mon, Jul 21, 2008 at 12:52:45PM +0300, Pekka Enberg (penberg@cs.helsinki.fi) wrote:
    > > On Mon, Jul 21, 2008 at 12:41 PM, Ingo Molnar wrote:
    > > > update about this problem: just triggered another colorful crash, see
    > > > below. This was with the 4K object dump patch already, maybe the dump
    > > > gives a clue?

    > >
    > > ...to point out the obvious:
    > >
    > > > ================================================== ===========================
    > > > BUG skbuff_head_cache: Poison overwritten
    > > > -----------------------------------------------------------------------------
    > > >
    > > > INFO: 0xf7ccc100-0xf7ccc103. First byte 0x0 instead of 0x6b
    > > > INFO: Allocated in __alloc_skb+0x30/0x10e age=1 cpu=1 pid=1
    > > > INFO: Freed in __kfree_skb+0x63/0x66 age=1 cpu=0 pid=0
    > > > INFO: Slab 0xc1c34ca0 objects=16 used=1 fp=0xf7ccc100 flags=0x400000c3
    > > > INFO: Object 0xf7ccc100 @offset=256 fp=0xf7ccc200
    > > >
    > > > Bytes b4 0xf7ccc0f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
    > > > Object 0xf7ccc100: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk

    > >
    > > Use after free where first four bytes are zeroed.

    >
    > Not that obvious...
    > skb->next is cleared in lots of places, in xmit network helper
    > for example, but since rest of the packet was not modified, it
    > means given skb was not freed, so it will not help.
    >
    > Ingo do you see other similar dumps with last byte modified? That's
    > the one which can help to determine the reason.


    the problem is, most of the crashes dont come with any usable dump. This
    is a laptop so netconsole is the only reliable route out - and if
    something in networking crashes chances are that it hoses netconsole
    before it can get anything out.

    Another thing is that i'm activating netconsole on this box via a kernel
    boot line and from within a bzImage (to get it activated as early as
    possible) - maybe that's a tad too early for certain initialization
    sequences?

    I could try run tests with netconsole deactivated, if you think that's a
    worthwile line of probing this problem. (although that would make me do
    blind tests in essence - having kernel log output is really essential.)

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  16. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    On Mon, Jul 21, 2008 at 12:50 PM, Ingo Molnar wrote:
    > the problem is, most of the crashes dont come with any usable dump. This
    > is a laptop so netconsole is the only reliable route out - and if
    > something in networking crashes chances are that it hoses netconsole
    > before it can get anything out.
    >
    > Another thing is that i'm activating netconsole on this box via a kernel
    > boot line and from within a bzImage (to get it activated as early as
    > possible) - maybe that's a tad too early for certain initialization
    > sequences?
    >
    > I could try run tests with netconsole deactivated, if you think that's a
    > worthwile line of probing this problem. (although that would make me do
    > blind tests in essence - having kernel log output is really essential.)


    How about posting your custom patches for public review? :-D

    (There was recently an odd case of kzalloc() succeeding even though it
    was called before the slab caches were initialized -- and it only
    generated a warning about irqs-on happening too early. I just mean to
    say that it _can_ happen. On another machine, it crashed
    spectacularly. I guess you're not enabling the netconsole before slab
    allocator is up?)


    Vegard

    --
    "The animistic metaphor of the bug that maliciously sneaked in while
    the programmer was not looking is intellectually dishonest as it
    disguises that the error is the programmer's own creation."
    -- E. W. Dijkstra, EWD1036
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  17. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten


    * Vegard Nossum wrote:

    > On Mon, Jul 21, 2008 at 12:50 PM, Ingo Molnar wrote:
    > > the problem is, most of the crashes dont come with any usable dump. This
    > > is a laptop so netconsole is the only reliable route out - and if
    > > something in networking crashes chances are that it hoses netconsole
    > > before it can get anything out.
    > >
    > > Another thing is that i'm activating netconsole on this box via a kernel
    > > boot line and from within a bzImage (to get it activated as early as
    > > possible) - maybe that's a tad too early for certain initialization
    > > sequences?
    > >
    > > I could try run tests with netconsole deactivated, if you think
    > > that's a worthwile line of probing this problem. (although that
    > > would make me do blind tests in essence - having kernel log output
    > > is really essential.)

    >
    > How about posting your custom patches for public review? :-D


    I changed nothing in that area - being able to enable the netconsole
    like that has been a years-old feature. Otherwise it's just tip/master,
    but the weirdnesses were reproducible under plain linus/master as well.

    > (There was recently an odd case of kzalloc() succeeding even though it
    > was called before the slab caches were initialized -- and it only
    > generated a warning about irqs-on happening too early. I just mean to
    > say that it _can_ happen. On another machine, it crashed
    > spectacularly. I guess you're not enabling the netconsole before slab
    > allocator is up?)


    if i had any changes in that area i'd have declared them. Find below the
    full bootlog of the last crash - can you see any init order weirdness in
    it?

    Btw., i disabled netconsole now and got 3 successful bootups in a row.
    (which is still not significant statistically - i had a series of 40
    bootups in a row before. Then again i had like 5 failures in a row
    earlier this morning, before disabling netconsole.)

    Btw. #2, in the log below you can see this partial line:

    initcall pm_qos_power_init+0x0/0x54Linux version 2.6.26-tip (mingo@europe) (gcc version 4.2.2) #3261 SMP Mon Jul 21 11:17:45 CEST 2008

    That was a previous bootup with another failure but which came without
    any log output.

    Hey, if you find this report frustrating, dont worry, i almost never
    report easy bugs - i can fix them just fine ;-)

    Ingo

    --------------->
    initcall pm_qos_power_init+0x0/0x54Linux version 2.6.26-tip (mingo@europe) (gcc version 4.2.2) #3261 SMP Mon Jul 21 11:17:45 CEST 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
    BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
    BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
    BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    debug: ignoring loglevel setting.
    using polling idle threads.
    using polling idle threads.
    last_pfn = 0x7f6e0 max_arch_pfn = 0x1000000
    Warning only 896MB will be used.
    Use a HIGHMEM enabled kernel.
    kernel direct mapping tables up to 38000000 @ 7000-c000
    NX (Execute Disable) protection: active
    DMI present.
    ACPI: RSDP 000F68A0, 0024 (r2 LENOVO)
    ACPI: XSDT 7F6E631F, 0074 (r1 LENOVO TP-79 1020 LTP 0)
    ACPI: FACP 7F6E6400, 00F4 (r3 LENOVO TP-79 1020 LNVO 1)
    ACPI Warning (tbfadt-0447): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
    ACPI: DSDT 7F6E65E7, C765 (r1 LENOVO TP-79 1020 MSFT 100000E)
    ACPI: FACS 7F6F4000, 0040
    ACPI: SSDT 7F6E65B4, 0033 (r1 LENOVO TP-79 1020 MSFT 100000E)
    ACPI: ECDT 7F6F2D4C, 0052 (r1 LENOVO TP-79 1020 LNVO 1)
    ACPI: TCPA 7F6F2D9E, 0032 (r2 LENOVO TP-79 1020 LNVO 1)
    ACPI: APIC 7F6F2DD0, 0068 (r1 LENOVO TP-79 1020 LNVO 1)
    ACPI: MCFG 7F6F2E38, 003E (r1 LENOVO TP-79 1020 LNVO 1)
    ACPI: HPET 7F6F2E76, 0038 (r1 LENOVO TP-79 1020 LNVO 1)
    ACPI: BOOT 7F6F2FD8, 0028 (r1 LENOVO TP-79 1020 LTP 1)
    ACPI: SSDT 7F6E58DA, 0507 (r1 LENOVO TP-79 1020 INTL 20050513)
    ACPI: SSDT 7F6E5702, 01D8 (r1 LENOVO TP-79 1020 INTL 20050513)
    Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used
    Entering add_active_range(0, 0x100, 0x38000) 1 entries of 256 used
    896MB LOWMEM available.
    mapped low ram: 0 - 38000000
    low ram: 00000000 - 38000000
    bootmap 00009000 - 00010000
    (8 early reservations) ==> bootmem [0000000000 - 0038000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 0000ccbc50] TEXT DATA BSS ==> [0000100000 - 0000ccbc50]
    #4 [0000ccc000 - 0000d18000] INIT_PG_TABLE ==> [0000ccc000 - 0000d18000]
    #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x00038000
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x00038000
    On node 0 totalpages: 229279
    free_area_init_node: node 0, pgdat c081bf80, node_mem_map c1000000
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3943 pages, LIFO batch:0
    Normal zone: 3080 pages used for memmap
    Normal zone: 222200 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Bus #0 is ISA
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
    PERCPU: Allocating 332592 bytes of per cpu data
    NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 226143
    Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 netconsole=4444@10.0.1.15/eth0,4444@10.0.1.16/00:19:d1:01:f5:55 nmi_watchdog=2 idle=poll no_hz=off nmi_watchdog=0 nolapic_timer hpet=disable idle=mwait idle=poll nopat
    kernel profiling enabled (shift: 0)
    debug: sysrq always enabled.
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c0941000 soft=c0939000
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Extended CMOS year: 2000
    TSC calibrated against PM_TIMER
    Detected 1828.742 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    .... MAX_LOCKDEP_SUBCLASSES: 8
    .... MAX_LOCK_DEPTH: 48
    .... MAX_LOCKDEP_KEYS: 2048
    .... CLASSHASH_SIZE: 1024
    .... MAX_LOCKDEP_ENTRIES: 8192
    .... MAX_LOCKDEP_CHAINS: 16384
    .... CHAINHASH_SIZE: 8192
    memory used by lock dependency info: 1088 kB
    per task-struct memory footprint: 2688 bytes
    ------------------------
    | Locking API testsuite:
    ----------------------------------------------------------------------------
    | spin |wlock |rlock |mutex | wsem | rsem |
    --------------------------------------------------------------------------
    A-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
    double unlock: ok | ok | ok | ok | ok | ok |
    initialize held: ok | ok | ok | ok | ok | ok |
    bad unlock order: ok | ok | ok | ok | ok | ok |
    --------------------------------------------------------------------------
    recursive read-lock: | ok | | ok |
    recursive read-lock #2: | ok | | ok |
    mixed read-write-lock: | ok | | ok |
    mixed write-read-lock: | ok | | ok |
    --------------------------------------------------------------------------
    hard-irqs-on + irq-safe-A/12: ok | ok | ok |
    soft-irqs-on + irq-safe-A/12: ok | ok | ok |
    hard-irqs-on + irq-safe-A/21: ok | ok | ok |
    soft-irqs-on + irq-safe-A/21: ok | ok | ok |
    sirq-safe-A => hirqs-on/12: ok | ok | ok |
    sirq-safe-A => hirqs-on/21: ok | ok | ok |
    hard-safe-A + irqs-on/12: ok | ok | ok |
    soft-safe-A + irqs-on/12: ok | ok | ok |
    hard-safe-A + irqs-on/21: ok | ok | ok |
    soft-safe-A + irqs-on/21: ok | ok | ok |
    hard-safe-A + unsafe-B #1/123: ok | ok | ok |
    soft-safe-A + unsafe-B #1/123: ok | ok | ok |
    hard-safe-A + unsafe-B #1/132: ok | ok | ok |
    soft-safe-A + unsafe-B #1/132: ok | ok | ok |
    hard-safe-A + unsafe-B #1/213: ok | ok | ok |
    soft-safe-A + unsafe-B #1/213: ok | ok | ok |
    hard-safe-A + unsafe-B #1/231: ok | ok | ok |
    soft-safe-A + unsafe-B #1/231: ok | ok | ok |
    hard-safe-A + unsafe-B #1/312: ok | ok | ok |
    soft-safe-A + unsafe-B #1/312: ok | ok | ok |
    hard-safe-A + unsafe-B #1/321: ok | ok | ok |
    soft-safe-A + unsafe-B #1/321: ok | ok | ok |
    hard-safe-A + unsafe-B #2/123: ok | ok | ok |
    soft-safe-A + unsafe-B #2/123: ok | ok | ok |
    hard-safe-A + unsafe-B #2/132: ok | ok | ok |
    soft-safe-A + unsafe-B #2/132: ok | ok | ok |
    hard-safe-A + unsafe-B #2/213: ok | ok | ok |
    soft-safe-A + unsafe-B #2/213: ok | ok | ok |
    hard-safe-A + unsafe-B #2/231: ok | ok | ok |
    soft-safe-A + unsafe-B #2/231: ok | ok | ok |
    hard-safe-A + unsafe-B #2/312: ok | ok | ok |
    soft-safe-A + unsafe-B #2/312: ok | ok | ok |
    hard-safe-A + unsafe-B #2/321: ok | ok | ok |
    soft-safe-A + unsafe-B #2/321: ok | ok | ok |
    hard-irq lock-inversion/123: ok | ok | ok |
    soft-irq lock-inversion/123: ok | ok | ok |
    hard-irq lock-inversion/132: ok | ok | ok |
    soft-irq lock-inversion/132: ok | ok | ok |
    hard-irq lock-inversion/213: ok | ok | ok |
    soft-irq lock-inversion/213: ok | ok | ok |
    hard-irq lock-inversion/231: ok | ok | ok |
    soft-irq lock-inversion/231: ok | ok | ok |
    hard-irq lock-inversion/312: ok | ok | ok |
    soft-irq lock-inversion/312: ok | ok | ok |
    hard-irq lock-inversion/321: ok | ok | ok |
    soft-irq lock-inversion/321: ok | ok | ok |
    hard-irq read-recursion/123: ok |
    soft-irq read-recursion/123: ok |
    hard-irq read-recursion/132: ok |
    soft-irq read-recursion/132: ok |
    hard-irq read-recursion/213: ok |
    soft-irq read-recursion/213: ok |
    hard-irq read-recursion/231: ok |
    soft-irq read-recursion/231: ok |
    hard-irq read-recursion/312: ok |
    soft-irq read-recursion/312: ok |
    hard-irq read-recursion/321: ok |
    soft-irq read-recursion/321: ok |
    -------------------------------------------------------
    Good, all 218 testcases passed! |
    ---------------------------------
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 872052k/917504k available (4655k kernel code, 45060k reserved, 3079k data, 656k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfffb8000 - 0xfffff000 ( 284 kB)
    vmalloc : 0xf8800000 - 0xfffb6000 ( 119 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0892000 - 0xc0936000 ( 656 kB)
    .data : 0xc058bc52 - 0xc088dacc (3079 kB)
    .text : 0xc0100000 - 0xc058bc52 (4655 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 16 of 16 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3657.48 BogoMIPS (lpj=1828742)
    Security Framework initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20080609
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 0x00000040 after: 0x00000000
    ENABLING IO-APIC IRQs
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 1-0 not connected.
    IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
    ...TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
    ++++++++++++++++++++=_---CPU UP 1
    lockdep: fixing up alternatives.
    CPU 1 irqstacks, hard=c0942000 soft=c093a000
    Booting processor 1/1 ip 6000
    Setting warm reset code and vector.
    1.
    2.
    3.
    Asserting INIT.
    Waiting for send to finish...
    Deasserting INIT.
    Waiting for send to finish...
    #startup loops: 2.
    Sending STARTUP #1.
    After apic_write.
    Initializing CPU#1
    Startup point 1.
    CPU#1 (phys ID: 1) waiting for CALLOUT
    Waiting for send to finish...
    Sending STARTUP #2.
    After apic_write.
    Startup point 1.
    Waiting for send to finish...
    After Startup.
    Before Callout 1.
    After Callout 1.
    CALLIN, before setup_local_APIC().
    masked ExtINT on CPU#1
    Calibrating delay using timer specific routine.. <6>3194.05 BogoMIPS (lpj=1597026)
    Stack at about f7c7efb0
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    OK.
    CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
    CPU has booted.
    checking TSC synchronization [CPU#0 -> CPU#1]:
    Measured 580129 cycles TSC warp between CPUs, turning off TSC clock.
    Marking TSC unstable due to check_tsc_sync_source failed
    Brought up 2 CPUs
    Boot done.
    Before bogomips.
    Total of 2 processors activated (6851.53 BogoMIPS).
    Before bogocount - setting activated=1.
    khelper used greatest stack depth: 3052 bytes left
    khelper used greatest stack depth: 2684 bytes left
    calling init_cpufreq_transition_notifier_list+0x0/0x18
    initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 msecs
    calling net_ns_init+0x0/0x10f
    net_namespace: 800 bytes
    initcall net_ns_init+0x0/0x10f returned 0 after 0 msecs
    calling cpufreq_tsc+0x0/0x13
    initcall cpufreq_tsc+0x0/0x13 returned 0 after 0 msecs
    calling reboot_init+0x0/0x11
    initcall reboot_init+0x0/0x11 returned 0 after 0 msecs
    calling sysctl_init+0x0/0x29
    initcall sysctl_init+0x0/0x29 returned 0 after 0 msecs
    calling ksysfs_init+0x0/0x96
    initcall ksysfs_init+0x0/0x96 returned 0 after 0 msecs
    calling init_jiffies_clocksource+0x0/0xf
    initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 msecs
    calling pm_init+0x0/0x2d
    initcall pm_init+0x0/0x2d returned 0 after 0 msecs
    calling filelock_init+0x0/0x27
    initcall filelock_init+0x0/0x27 returned 0 after 0 msecs
    calling init_aout_binfmt+0x0/0xf
    initcall init_aout_binfmt+0x0/0xf returned 0 after 0 msecs
    calling init_misc_binfmt+0x0/0x33
    initcall init_misc_binfmt+0x0/0x33 returned 0 after 0 msecs
    calling init_script_binfmt+0x0/0xf
    initcall init_script_binfmt+0x0/0xf returned 0 after 0 msecs
    calling init_elf_binfmt+0x0/0xf
    initcall init_elf_binfmt+0x0/0xf returned 0 after 0 msecs
    calling debugfs_init+0x0/0x41
    initcall debugfs_init+0x0/0x41 returned 0 after 0 msecs
    calling securityfs_init+0x0/0x41
    initcall securityfs_init+0x0/0x41 returned 0 after 0 msecs
    calling random32_init+0x0/0x3f
    initcall random32_init+0x0/0x3f returned 0 after 0 msecs
    calling cpufreq_core_init+0x0/0x51
    initcall cpufreq_core_init+0x0/0x51 returned 0 after 0 msecs
    calling virtio_init+0x0/0x1f
    initcall virtio_init+0x0/0x1f returned 0 after 0 msecs
    calling sock_init+0x0/0x51
    initcall sock_init+0x0/0x51 returned 0 after 0 msecs
    calling netpoll_init+0x0/0x11
    initcall netpoll_init+0x0/0x11 returned 0 after 0 msecs
    calling netlink_proto_init+0x0/0x107
    NET: Registered protocol family 16
    initcall netlink_proto_init+0x0/0x107 returned 0 after 0 msecs
    calling bdi_class_init+0x0/0x33
    initcall bdi_class_init+0x0/0x33 returned 0 after 0 msecs
    calling kobject_uevent_init+0x0/0x3f
    initcall kobject_uevent_init+0x0/0x3f returned 0 after 0 msecs
    calling pcibus_class_init+0x0/0xf
    initcall pcibus_class_init+0x0/0xf returned 0 after 0 msecs
    calling pci_driver_init+0x0/0xf
    initcall pci_driver_init+0x0/0xf returned 0 after 0 msecs
    calling lcd_class_init+0x0/0x3d
    initcall lcd_class_init+0x0/0x3d returned 0 after 0 msecs
    calling backlight_class_init+0x0/0x3d
    initcall backlight_class_init+0x0/0x3d returned 0 after 0 msecs
    calling tty_class_init+0x0/0x27
    initcall tty_class_init+0x0/0x27 returned 0 after 0 msecs
    calling vtconsole_class_init+0x0/0x9a
    initcall vtconsole_class_init+0x0/0x9a returned 0 after 0 msecs
    calling eisa_init+0x0/0x26
    EISA bus registered
    initcall eisa_init+0x0/0x26 returned 0 after 0 msecs
    calling enable_pci_io_ecs+0x0/0x2b
    initcall enable_pci_io_ecs+0x0/0x2b returned 0 after 0 msecs
    calling rdc_board_setup+0x0/0x19
    initcall rdc_board_setup+0x0/0x19 returned 0 after 0 msecs
    calling arch_kdebugfs_init+0x0/0x1de
    initcall arch_kdebugfs_init+0x0/0x1de returned 0 after 0 msecs
    calling init_pit_clocksource+0x0/0x8f
    initcall init_pit_clocksource+0x0/0x8f returned 0 after 0 msecs
    calling ffh_cstate_init+0x0/0x2c
    initcall ffh_cstate_init+0x0/0x2c returned 0 after 0 msecs
    calling acpi_pci_init+0x0/0x38
    ACPI: bus type pci registered
    initcall acpi_pci_init+0x0/0x38 returned 0 after 0 msecs
    calling init_acpi_device_notify+0x0/0x43
    initcall init_acpi_device_notify+0x0/0x43 returned 0 after 0 msecs
    calling pci_arch_init+0x0/0x4a
    PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
    PCI: MCFG area at f0000000 reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    initcall pci_arch_init+0x0/0x4a returned 0 after 0 msecs
    calling topology_init+0x0/0x28
    initcall topology_init+0x0/0x28 returned 0 after 0 msecs
    calling param_sysfs_init+0x0/0x154
    initcall param_sysfs_init+0x0/0x154 returned 0 after 21 msecs
    calling pm_sysrq_init+0x0/0x16
    initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 msecs
    calling readahead_init+0x0/0x2f
    initcall readahead_init+0x0/0x2f returned 0 after 0 msecs
    calling init_bio+0x0/0xa6
    initcall init_bio+0x0/0xa6 returned 0 after 0 msecs
    calling blk_settings_init+0x0/0x1d
    initcall blk_settings_init+0x0/0x1d returned 0 after 0 msecs
    calling blk_ioc_init+0x0/0x24
    initcall blk_ioc_init+0x0/0x24 returned 0 after 0 msecs
    calling genhd_device_init+0x0/0x32
    initcall genhd_device_init+0x0/0x32 returned 0 after 0 msecs
    calling pci_slot_init+0x0/0x3b
    initcall pci_slot_init+0x0/0x3b returned 0 after 0 msecs
    calling fbmem_init+0x0/0x73
    initcall fbmem_init+0x0/0x73 returned 0 after 0 msecs
    calling acpi_init+0x0/0x21b
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S5)
    ACPI: Using IOAPIC for interrupt routing
    initcall acpi_init+0x0/0x21b returned 0 after 67 msecs
    calling acpi_scan_init+0x0/0xed
    initcall acpi_scan_init+0x0/0xed returned 0 after 49 msecs
    calling acpi_ec_init+0x0/0x55
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    initcall acpi_ec_init+0x0/0x55 returned 0 after 0 msecs
    calling acpi_pci_root_init+0x0/0x25
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:02.0 reg 10 32bit mmio: [ee100000, ee17ffff]
    PCI: 0000:00:02.0 reg 14 io port: [1800, 1807]
    PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
    PCI: 0000:00:02.0 reg 1c 32bit mmio: [ee200000, ee23ffff]
    PCI: 0000:00:02.1 reg 10 32bit mmio: [ee180000, ee1fffff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
    PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
    PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
    PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f]
    PCI: 0000:00:1d.7 reg 10 32bit mmio: [ee444000, ee4443ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
    PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
    PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
    PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
    PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
    PCI: 0000:00:1f.2 reg 10 io port: [18d0, 18d7]
    PCI: 0000:00:1f.2 reg 14 io port: [18c4, 18c7]
    PCI: 0000:00:1f.2 reg 18 io port: [18c8, 18cf]
    PCI: 0000:00:1f.2 reg 1c io port: [18c0, 18c3]
    PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf]
    PCI: 0000:00:1f.2 reg 24 32bit mmio: [ee444400, ee4447ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff]
    PCI: 0000:02:00.0 reg 10 32bit mmio: [ee000000, ee01ffff]
    PCI: 0000:02:00.0 reg 18 io port: [2000, 201f]
    pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:1c.0 32bit mmio: [ee000000, ee0fffff]
    PCI: 0000:03:00.0 reg 10 32bit mmio: [edf00000, edf00fff]
    pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    PCI: bridge 0000:00:1c.1 io port: [3000, 4fff]
    PCI: bridge 0000:00:1c.1 32bit mmio: [ec000000, edffffff]
    PCI: bridge 0000:00:1c.1 64bit mmio pref: [e4000000, e40fffff]
    PCI: bridge 0000:00:1c.2 io port: [5000, 6fff]
    PCI: bridge 0000:00:1c.2 32bit mmio: [e8000000, e9ffffff]
    PCI: bridge 0000:00:1c.2 64bit mmio pref: [e4100000, e41fffff]
    PCI: bridge 0000:00:1c.3 io port: [7000, 8fff]
    PCI: bridge 0000:00:1c.3 32bit mmio: [ea000000, ebffffff]
    PCI: bridge 0000:00:1c.3 64bit mmio pref: [e4200000, e42fffff]
    PCI: 0000:15:00.0 reg 10 32bit mmio: [e4300000, e4300fff]
    pci 0000:15:00.0: supports D1
    pci 0000:15:00.0: supports D2
    pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    PCI: bridge 0000:00:1e.0 io port: [9000, cfff]
    PCI: bridge 0000:00:1e.0 32bit mmio: [e4300000, e7ffffff]
    PCI: bridge 0000:00:1e.0 64bit mmio pref: [e0000000, e3ffffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    initcall acpi_pci_root_init+0x0/0x25 returned 0 after 43 msecs
    calling acpi_pci_link_init+0x0/0x43
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    initcall acpi_pci_link_init+0x0/0x43 returned 0 after 10 msecs
    calling acpi_power_init+0x0/0x69
    ACPI: Power Resource [PUBS] (on)
    initcall acpi_power_init+0x0/0x69 returned 0 after 1 msecs
    calling acpi_system_init+0x0/0x167
    initcall acpi_system_init+0x0/0x167 returned 0 after 0 msecs
    calling acpi_cm_sbs_init+0x0/0x7
    initcall acpi_cm_sbs_init+0x0/0x7 returned 0 after 0 msecs
    calling pnp_init+0x0/0x19
    Linux Plug and Play Support v0.97 (c) Adam Belay
    initcall pnp_init+0x0/0x19 returned 0 after 0 msecs
    calling pnpacpi_init+0x0/0x7b
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: parse allocated resources
    pnp 00:00: add mem 0x0-0x9ffff flags 0x1
    pnp 00:00: add mem 0xc0000-0xc3fff flags 0x0
    pnp 00:00: add mem 0xc4000-0xc7fff flags 0x0
    pnp 00:00: add mem 0xc8000-0xcbfff flags 0x0
    pnp 00:00: add mem 0xcc000-0xcffff flags 0x0
    pnp 00:00: add mem 0xd0000-0xd3fff flags 0x0
    pnp 00:00: add mem 0xd4000-0xd3fff flags 0x10000000
    pnp 00:00: add mem 0xd8000-0xd7fff flags 0x10000000
    pnp 00:00: add mem 0xdc000-0xdffff flags 0x1
    pnp 00:00: add mem 0xe0000-0xe3fff flags 0x0
    pnp 00:00: add mem 0xe4000-0xe7fff flags 0x0
    pnp 00:00: add mem 0xe8000-0xebfff flags 0x0
    pnp 00:00: add mem 0xec000-0xeffff flags 0x0
    pnp 00:00: add mem 0xf0000-0xfffff flags 0x0
    pnp 00:00: add mem 0x100000-0x7fffffff flags 0x1
    pnp 00:00: add mem 0xfec00000-0xffffffff flags 0x0
    pnp 00:00: add mem 0xfed41000-0xfed40fff flags 0x10000000
    pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x188
    pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    pnp 00:01: parse allocated resources
    pnp 00:01: add io 0xcf8-0xcff flags 0x1
    pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    pnp 00:02: parse allocated resources
    pnp 00:02: add io 0x10-0x1f flags 0x1
    pnp 00:02: add io 0x90-0x9f flags 0x1
    pnp 00:02: add io 0x24-0x25 flags 0x1
    pnp 00:02: add io 0x28-0x29 flags 0x1
    pnp 00:02: add io 0x2c-0x2d flags 0x1
    pnp 00:02: add io 0x30-0x31 flags 0x1
    pnp 00:02: add io 0x34-0x35 flags 0x1
    pnp 00:02: add io 0x38-0x39 flags 0x1
    pnp 00:02: add io 0x3c-0x3d flags 0x1
    pnp 00:02: add io 0xa4-0xa5 flags 0x1
    pnp 00:02: add io 0xa8-0xa9 flags 0x1
    pnp 00:02: add io 0xac-0xad flags 0x1
    pnp 00:02: add io 0xb0-0xb5 flags 0x1
    pnp 00:02: add io 0xb8-0xb9 flags 0x1
    pnp 00:02: add io 0xbc-0xbd flags 0x1
    pnp 00:02: add io 0x50-0x53 flags 0x1
    pnp 00:02: add io 0x72-0x77 flags 0x1
    pnp 00:02: add io 0x164e-0x164f flags 0x1
    pnp 00:02: add io 0x2e-0x2f flags 0x1
    pnp 00:02: add io 0x1000-0x107f flags 0x1
    pnp 00:02: add io 0x1180-0x11bf flags 0x1
    pnp 00:02: add io 0x800-0x80f flags 0x1
    pnp 00:02: add io 0x15e0-0x15ef flags 0x1
    pnp 00:02: add io 0x1600-0x165f flags 0x1
    pnp 00:02: add mem 0xf0000000-0xf3ffffff flags 0x1
    pnp 00:02: add mem 0xfed1c000-0xfed1ffff flags 0x1
    pnp 00:02: add mem 0xfed14000-0xfed17fff flags 0x1
    pnp 00:02: add mem 0xfed18000-0xfed18fff flags 0x1
    pnp 00:02: add mem 0xfed19000-0xfed19fff flags 0x1
    pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x188
    pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:03: parse allocated resources
    pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x0
    pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    pnp 00:04: parse allocated resources
    pnp 00:04: add io 0x0-0xf flags 0x1
    pnp 00:04: add io 0x80-0x8f flags 0x1
    pnp 00:04: add io 0xc0-0xdf flags 0x1
    pnp 00:04: add dma 4 flags 0x5
    pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    pnp 00:05: parse allocated resources
    pnp 00:05: add io 0x61-0x61 flags 0x1
    pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    pnp 00:06: parse allocated resources
    pnp 00:06: add io 0xf0-0xf0 flags 0x1
    pnp 00:06: add irq 13 flags 0x1
    pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    pnp 00:07: parse allocated resources
    pnp 00:07: add io 0x70-0x71 flags 0x1
    pnp 00:07: add irq 8 flags 0x1
    pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:08: parse allocated resources
    pnp 00:08: add io 0x60-0x60 flags 0x1
    pnp 00:08: add io 0x64-0x64 flags 0x1
    pnp 00:08: add irq 1 flags 0x1
    pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    pnp 00:09: parse allocated resources
    pnp 00:09: add irq 12 flags 0x1
    pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
    pnp 00:0a: parse allocated resources
    pnp 00:0a: add io 0x2f8-0x2ff flags 0x1
    pnp 00:0a: add irq 3 flags 0x1
    pnp 00:0a: add dma 3 flags 0x0
    pnp 00:0a: parse resource options
    pnp 00:0a: dependent set 0 (preferred) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
    pnp 00:0a: dependent set 0 (preferred) irq 3 flags 0x1
    pnp 00:0a: dependent set 0 (preferred) dma 0 1 3 (bitmask 0xb) flags 0x0
    pnp 00:0a: dependent set 1 (acceptable) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
    pnp 00:0a: dependent set 1 (acceptable) irq 4 flags 0x1
    pnp 00:0a: dependent set 1 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
    pnp 00:0a: dependent set 2 (acceptable) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
    pnp 00:0a: dependent set 2 (acceptable) irq 3 flags 0x1
    pnp 00:0a: dependent set 2 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
    pnp 00:0a: dependent set 3 (acceptable) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
    pnp 00:0a: dependent set 3 (acceptable) irq 4 flags 0x1
    pnp 00:0a: dependent set 3 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
    pnp 00:0a: dependent set 4 (functional) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
    pnp 00:0a: dependent set 4 (functional) irq 4 5 7 flags 0x1
    pnp 00:0a: dependent set 4 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
    pnp 00:0a: dependent set 5 (functional) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
    pnp 00:0a: dependent set 5 (functional) irq 3 5 7 flags 0x1
    pnp 00:0a: dependent set 5 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
    pnp 00:0a: dependent set 6 (functional) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
    pnp 00:0a: dependent set 6 (functional) irq 4 5 7 flags 0x1
    pnp 00:0a: dependent set 6 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
    pnp 00:0a: dependent set 7 (functional) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
    pnp 00:0a: dependent set 7 (functional) irq 3 5 7 flags 0x1
    pnp 00:0a: dependent set 7 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
    pnp 00:0a: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
    pnp: PnP ACPI: found 11 devices
    ACPI: ACPI bus type pnp unregistered
    initcall pnpacpi_init+0x0/0x7b returned 0 after 26 msecs
    calling misc_init+0x0/0x7f
    initcall misc_init+0x0/0x7f returned 0 after 0 msecs
    calling cn_init+0x0/0xcb
    initcall cn_init+0x0/0xcb returned 0 after 0 msecs
    calling tifm_init+0x0/0x6d
    initcall tifm_init+0x0/0x6d returned 0 after 0 msecs
    calling phy_init+0x0/0x29
    initcall phy_init+0x0/0x29 returned 0 after 0 msecs
    calling init_scsi+0x0/0x79
    SCSI subsystem initialized
    initcall init_scsi+0x0/0x79 returned 0 after 0 msecs
    calling ata_init+0x0/0x2a4
    libata version 3.00 loaded.
    initcall ata_init+0x0/0x2a4 returned 0 after 0 msecs
    calling spi_init+0x0/0x68
    initcall spi_init+0x0/0x68 returned 0 after 0 msecs
    calling usb_init+0x0/0xfd
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    initcall usb_init+0x0/0xfd returned 0 after 1 msecs
    calling serio_init+0x0/0x82
    initcall serio_init+0x0/0x82 returned 0 after 0 msecs
    calling gameport_init+0x0/0x82
    initcall gameport_init+0x0/0x82 returned 0 after 0 msecs
    calling input_init+0x0/0xd7
    initcall input_init+0x0/0xd7 returned 0 after 0 msecs
    calling i2c_init+0x0/0x4f
    i2c-core: driver [dummy] registered
    initcall i2c_init+0x0/0x4f returned 0 after 0 msecs
    calling power_supply_class_init+0x0/0x29
    initcall power_supply_class_init+0x0/0x29 returned 0 after 0 msecs
    calling thermal_init+0x0/0x41
    initcall thermal_init+0x0/0x41 returned 0 after 0 msecs
    calling mmc_init+0x0/0x6b
    initcall mmc_init+0x0/0x6b returned 0 after 0 msecs
    calling leds_init+0x0/0x27
    initcall leds_init+0x0/0x27 returned 0 after 0 msecs
    calling dma_bus_init+0x0/0x23
    initcall dma_bus_init+0x0/0x23 returned 0 after 0 msecs
    calling pci_subsys_init+0x0/0xe6
    PCI: Using ACPI for IRQ routing
    number of MP IRQ sources: 15.
    number of IO-APIC #1 registers: 24.
    testing the IO APIC.......................
    IO APIC #1......
    ..... register #00: 02000000
    ........ : physical APIC id: 02
    ........ : Delivery Type: 0
    ........ : LTS : 0
    ..... register #01: 00170020
    ........ : max redirection entries: 0017
    ........ : PRQ implemented: 0
    ........ : IO APIC version: 0020
    ..... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 000 00 1 0 0 0 0 0 0 00
    01 003 03 1 0 0 0 0 1 1 39
    02 003 03 0 0 0 0 0 1 1 31
    03 003 03 1 0 0 0 0 1 1 41
    04 003 03 0 0 0 0 0 1 1 49
    05 003 03 0 0 0 0 0 1 1 51
    06 003 03 0 0 0 0 0 1 1 59
    07 003 03 0 0 0 0 0 1 1 61
    08 003 03 1 0 0 0 0 1 1 69
    09 003 03 0 1 0 0 0 1 1 71
    0a 003 03 0 0 0 0 0 1 1 79
    0b 003 03 0 0 0 0 0 1 1 81
    0c 003 03 1 0 0 0 0 1 1 89
    0d 003 03 1 0 0 0 0 1 1 91
    0e 003 03 0 0 0 0 0 1 1 99
    0f 003 03 0 0 0 0 0 1 1 A1
    10 000 00 1 0 0 0 0 0 0 00
    11 000 00 1 0 0 0 0 0 0 00
    12 000 00 1 0 0 0 0 0 0 00
    13 000 00 1 0 0 0 0 0 0 00
    14 000 00 1 0 0 0 0 0 0 00
    15 000 00 1 0 0 0 0 0 0 00
    16 000 00 1 0 0 0 0 0 0 00
    17 000 00 1 0 0 0 0 0 0 00
    IRQ to pin mappings:
    IRQ0 -> 0:2
    IRQ1 -> 0:1
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ9 -> 0:9
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    ..................................... done.
    initcall pci_subsys_init+0x0/0xe6 returned 0 after 6 msecs
    calling proto_init+0x0/0x27
    initcall proto_init+0x0/0x27 returned 0 after 0 msecs
    calling net_dev_init+0x0/0x12f
    initcall net_dev_init+0x0/0x12f returned 0 after 0 msecs
    calling neigh_init+0x0/0x66
    initcall neigh_init+0x0/0x66 returned 0 after 0 msecs
    calling fib_rules_init+0x0/0x99
    initcall fib_rules_init+0x0/0x99 returned 0 after 0 msecs
    calling genl_init+0x0/0xb0
    initcall genl_init+0x0/0xb0 returned 0 after 0 msecs
    calling cipso_v4_init+0x0/0x6d
    initcall cipso_v4_init+0x0/0x6d returned 0 after 0 msecs
    calling bt_init+0x0/0x50
    Bluetooth: Core ver 2.12
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    initcall bt_init+0x0/0x50 returned 0 after 0 msecs
    calling atm_init+0x0/0x9c
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    initcall atm_init+0x0/0x9c returned 0 after 0 msecs
    calling wireless_nlevent_init+0x0/0x39
    initcall wireless_nlevent_init+0x0/0x39 returned 0 after 0 msecs
    calling netlbl_init+0x0/0x6d
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    initcall netlbl_init+0x0/0x6d returned 0 after 0 msecs
    calling rfkill_init+0x0/0x5a
    initcall rfkill_init+0x0/0x5a returned 0 after 0 msecs
    calling sysctl_init+0x0/0x2d
    initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs
    calling pci_iommu_init+0x0/0xc
    initcall pci_iommu_init+0x0/0xc returned 0 after 0 msecs
    calling hpet_late_init+0x0/0xfb
    initcall hpet_late_init+0x0/0xfb returned -19 after 0 msecs
    calling clocksource_done_booting+0x0/0x11
    initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 msecs
    calling init_pipe_fs+0x0/0x41
    initcall init_pipe_fs+0x0/0x41 returned 0 after 0 msecs
    calling init_mnt_writers+0x0/0x61
    initcall init_mnt_writers+0x0/0x61 returned 0 after 0 msecs
    calling eventpoll_init+0x0/0x7d
    initcall eventpoll_init+0x0/0x7d returned 0 after 0 msecs
    calling anon_inode_init+0x0/0xdf
    initcall anon_inode_init+0x0/0xdf returned 0 after 0 msecs
    calling acpi_rtc_init+0x0/0xd4
    ACPI: RTC can wake from S4
    initcall acpi_rtc_init+0x0/0xd4 returned 0 after 0 msecs
    calling acpi_event_init+0x0/0x46
    initcall acpi_event_init+0x0/0x46 returned 0 after 0 msecs
    calling pnp_system_init+0x0/0xf
    pnp: the driver 'system' has been registered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
    system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
    system 00:00: iomem range 0xc8000-0xcbfff has been reserved
    system 00:00: iomem range 0xcc000-0xcffff could not be reserved
    system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
    system 00:00: driver attached
    system 00:02: ioport range 0x164e-0x164f has been reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11bf has been reserved
    system 00:02: ioport range 0x800-0x80f has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x165f could not be reserved
    system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
    system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
    system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
    system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
    system 00:02: driver attached
    initcall pnp_system_init+0x0/0xf returned 0 after 1 msecs
    calling chr_dev_init+0x0/0x86
    initcall chr_dev_init+0x0/0x86 returned 0 after 1 msecs
    calling firmware_class_init+0x0/0x5c
    initcall firmware_class_init+0x0/0x5c returned 0 after 0 msecs
    calling loopback_init+0x0/0xf
    initcall loopback_init+0x0/0xf returned 0 after 0 msecs
    calling cpufreq_gov_performance_init+0x0/0xf
    initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 msecs
    calling cpufreq_gov_dbs_init+0x0/0xf
    initcall cpufreq_gov_dbs_init+0x0/0xf returned 0 after 0 msecs
    calling init_acpi_pm_clocksource+0x0/0x152
    PM-Timer running at invalid rate: 87% of normal - aborting.
    initcall init_acpi_pm_clocksource+0x0/0x152 returned -19 after 28 msecs
    calling ssb_modinit+0x0/0x41
    initcall ssb_modinit+0x0/0x41 returned 0 after 0 msecs
    calling pcibios_assign_resources+0x0/0x91
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: 0x2000-0x2fff
    pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: 0x3000-0x4fff
    pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff
    pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff
    pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
    pci 0000:00:1c.2: IO window: 0x5000-0x6fff
    pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff
    pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
    pci 0000:00:1c.3: IO window: 0x7000-0x8fff
    pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff
    pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
    pci 0000:15:00.0: IO window: 0x009000-0x0090ff
    pci 0000:15:00.0: IO window: 0x009400-0x0094ff
    pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff
    pci 0000:15:00.0: MEM window: 0x88000000-0x8bffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
    pci 0000:00:1e.0: IO window: 0x9000-0xcfff
    pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff
    pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    pci 0000:00:1e.0: enabling device (0005 -> 0007)
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    vendor=8086 device=2448
    pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffffffffffff]
    bus: 02 index 0 io port: [2000, 2fff]
    bus: 02 index 1 mmio: [ee000000, ee0fffff]
    bus: 02 index 2 mmio: [0, 0]
    bus: 02 index 3 mmio: [0, 0]
    bus: 03 index 0 io port: [3000, 4fff]
    bus: 03 index 1 mmio: [ec000000, edffffff]
    bus: 03 index 2 mmio: [e4000000, e40fffff]
    bus: 03 index 3 mmio: [0, 0]
    bus: 04 index 0 io port: [5000, 6fff]
    bus: 04 index 1 mmio: [e8000000, e9ffffff]
    bus: 04 index 2 mmio: [e4100000, e41fffff]
    bus: 04 index 3 mmio: [0, 0]
    bus: 0c index 0 io port: [7000, 8fff]
    bus: 0c index 1 mmio: [ea000000, ebffffff]
    bus: 0c index 2 mmio: [e4200000, e42fffff]
    bus: 0c index 3 mmio: [0, 0]
    bus: 15 index 0 io port: [9000, cfff]
    bus: 15 index 1 mmio: [e4300000, e7ffffff]
    bus: 15 index 2 mmio: [e0000000, e3ffffff]
    bus: 15 index 3 io port: [0, ffff]
    bus: 15 index 4 mmio: [0, ffffffffffffffff]
    bus: 16 index 0 io port: [9000, 90ff]
    bus: 16 index 1 io port: [9400, 94ff]
    bus: 16 index 2 mmio: [e0000000, e3ffffff]
    bus: 16 index 3 mmio: [88000000, 8bffffff]
    initcall pcibios_assign_resources+0x0/0x91 returned 0 after 4 msecs
    calling inet_init+0x0/0x1be
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    initcall inet_init+0x0/0x1be returned 0 after 11 msecs
    calling af_unix_init+0x0/0x47
    NET: Registered protocol family 1
    initcall af_unix_init+0x0/0x47 returned 0 after 0 msecs
    calling populate_rootfs+0x0/0x102
    initcall populate_rootfs+0x0/0x102 returned 0 after 1 msecs
    calling pci_init+0x0/0x2c
    pci 0000:00:02.0: Boot video device
    pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
    pci 0000:00:1d.0: Performing full reset
    pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
    pci 0000:00:1d.1: Performing full reset
    pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
    pci 0000:00:1d.2: Performing full reset
    pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
    pci 0000:00:1d.3: Performing full reset
    initcall pci_init+0x0/0x2c returned 0 after 0 msecs
    calling ehci_hcd_init+0x0/0x70
    ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
    ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: default language 0x0409
    usb usb1: uevent
    usb usb1: usb_probe_device
    usb usb1: configuration #1 chosen from 1 choice
    usb usb1: adding 1-0:1.0 (config #1, interface 0)
    usb 1-0:1.0: uevent
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: no power switching (usb 1.0)
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: power on to power good time: 20ms
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
    ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.26-tip ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    initcall ehci_hcd_init+0x0/0x70 returned 0 after 116 msecs
    calling ohci_hcd_mod_init+0x0/0xb0
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd: block sizes: ed 64 td 64
    initcall ohci_hcd_mod_init+0x0/0xb0 returned 0 after 0 msecs
    calling uhci_hcd_init+0x0/0xc7
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    Pin 1-16 already programmed
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: detected 2 ports
    uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.0: Performing full reset
    uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
    usb usb2: default language 0x0409
    usb usb2: uevent
    usb usb2: usb_probe_device
    usb usb2: configuration #1 chosen from 1 choice
    usb usb2: adding 2-0:1.0 (config #1, interface 0)
    usb 2-0:1.0: uevent
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: no power switching (usb 1.0)
    hub 2-0:1.0: individual port over-current protection
    hub 2-0:1.0: power on to power good time: 2ms
    hub 2-0:1.0: local power source is good
    hub 2-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.26-tip uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: detected 2 ports
    uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.1: Performing full reset
    uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
    usb usb3: default language 0x0409
    usb usb3: uevent
    usb usb3: usb_probe_device
    usb usb3: configuration #1 chosen from 1 choice
    usb usb3: adding 3-0:1.0 (config #1, interface 0)
    usb 3-0:1.0: uevent
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: no power switching (usb 1.0)
    hub 3-0:1.0: individual port over-current protection
    hub 3-0:1.0: power on to power good time: 2ms
    hub 3-0:1.0: local power source is good
    hub 3-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 8 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
    hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.26-tip uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: detected 2 ports
    uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.2: Performing full reset
    uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    usb usb4: default language 0x0409
    usb usb4: uevent
    usb usb4: usb_probe_device
    usb usb4: configuration #1 chosen from 1 choice
    usb usb4: adding 4-0:1.0 (config #1, interface 0)
    usb 4-0:1.0: uevent
    hub 4-0:1.0: usb_probe_interface
    hub 4-0:1.0: usb_probe_interface - got id
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    hub 4-0:1.0: standalone hub
    hub 4-0:1.0: no power switching (usb 1.0)
    hub 4-0:1.0: individual port over-current protection
    hub 4-0:1.0: power on to power good time: 2ms
    hub 4-0:1.0: local power source is good
    hub 4-0:1.0: trying to enable port power on non-switchable hub
    hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.26-tip uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    Pin 1-19 already programmed
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: detected 2 ports
    uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.3: Performing full reset
    uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
    usb usb5: default language 0x0409
    usb usb5: uevent
    usb usb5: usb_probe_device
    usb usb5: configuration #1 chosen from 1 choice
    usb usb5: adding 5-0:1.0 (config #1, interface 0)
    usb 5-0:1.0: uevent
    hub 5-0:1.0: usb_probe_interface
    hub 5-0:1.0: usb_probe_interface - got id
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    hub 5-0:1.0: standalone hub
    hub 5-0:1.0: no power switching (usb 1.0)
    hub 5-0:1.0: individual port over-current protection
    hub 5-0:1.0: power on to power good time: 2ms
    hub 5-0:1.0: local power source is good
    hub 5-0:1.0: trying to enable port power on non-switchable hub
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
    uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00
    hub 5-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.26-tip uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.3
    initcall uhci_hcd_init+0x0/0xc7 returned 0 after 402 msecs
    calling i8259A_init_sysfs+0x0/0x1d
    initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 0 msecs
    calling sbf_init+0x0/0xbd
    Simple Boot Flag at 0x35 set to 0x1
    initcall sbf_init+0x0/0xbd returned 0 after 0 msecs
    calling i8237A_init_sysfs+0x0/0x1d
    initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 0 msecs
    calling add_rtc_cmos+0x0/0x1a
    initcall add_rtc_cmos+0x0/0x1a returned 0 after 0 msecs
    calling cache_sysfs_init+0x0/0x47
    initcall cache_sysfs_init+0x0/0x47 returned 0 after 0 msecs
    calling eps_init+0x0/0x3e
    initcall eps_init+0x0/0x3e returned -19 after 0 msecs
    calling nforce2_init+0x0/0x5e
    cpufreq: No nForce2 chipset.
    initcall nforce2_init+0x0/0x5e returned -19 after 0 msecs
    calling microcode_init+0x0/0xa2
    IA-32 Microcode Update Driver: v1.14a
    initcall microcode_init+0x0/0xa2 returned 0 after 0 msecs
    calling init_lapic_sysfs+0x0/0x38
    initcall init_lapic_sysfs+0x0/0x38 returned 0 after 0 msecs
    calling ioapic_init_sysfs+0x0/0x84
    initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 0 msecs
    calling add_pcspkr+0x0/0x35
    initcall add_pcspkr+0x0/0x35 returned 0 after 0 msecs
    calling start_pageattr_test+0x0/0x38
    initcall start_pageattr_test+0x0/0x38 returned 0 after 0 msecs
    calling debug_pagealloc_proc_init+0x0/0x27
    initcall debug_pagealloc_proc_init+0x0/0x27 returned 0 after 0 msecs
    calling aes_init+0x0/0xf
    initcall aes_init+0x0/0xf returned 0 after 0 msecs
    calling init+0x0/0xf
    initcall init+0x0/0xf returned 0 after 0 msecs
    calling init+0x0/0xf
    initcall init+0x0/0xf returned 0 after 0 msecs
    calling create_proc_profile+0x0/0x19f
    initcall create_proc_profile+0x0/0x19f returned 0 after 0 msecs
    calling ioresources_init+0x0/0x2d
    initcall ioresources_init+0x0/0x2d returned 0 after 0 msecs
    calling uid_cache_init+0x0/0x5e
    initcall uid_cache_init+0x0/0x5e returned 0 after 0 msecs
    calling init_posix_timers+0x0/0x7c
    initcall init_posix_timers+0x0/0x7c returned 0 after 0 msecs
    calling init_posix_cpu_timers+0x0/0x90
    initcall init_posix_cpu_timers+0x0/0x90 returned 0 after 0 msecs
    calling nsproxy_cache_init+0x0/0x27
    initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 msecs
    calling timekeeping_init_device+0x0/0x1d
    initcall timekeeping_init_device+0x0/0x1d returned 0 after 0 msecs
    calling init_clocksource_sysfs+0x0/0x43
    initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 0 msecs
    calling init_timer_list_procfs+0x0/0x27
    initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 msecs
    calling lockdep_proc_init+0x0/0x5f
    initcall lockdep_proc_init+0x0/0x5f returned 0 after 0 msecs
    calling futex_init+0x0/0x6f
    initcall futex_init+0x0/0x6f returned 0 after 0 msecs
    calling init_rttest+0x0/0x102
    Initializing RT-Tester: OK
    initcall init_rttest+0x0/0x102 returned 0 after 1 msecs
    calling proc_dma_init+0x0/0x1c
    initcall proc_dma_init+0x0/0x1c returned 0 after 0 msecs
    calling percpu_modinit+0x0/0x64
    initcall percpu_modinit+0x0/0x64 returned 0 after 0 msecs
    calling kallsyms_init+0x0/0x1f
    initcall kallsyms_init+0x0/0x1f returned 0 after 0 msecs
    calling crash_save_vmcoreinfo_init+0x0/0x316
    initcall crash_save_vmcoreinfo_init+0x0/0x316 returned 0 after 0 msecs
    calling crash_notes_memory_init+0x0/0x36
    initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 msecs
    calling pid_namespaces_init+0x0/0x27
    initcall pid_namespaces_init+0x0/0x27 returned 0 after 0 msecs
    calling audit_init+0x0/0xc4
    audit: initializing netlink socket (disabled)
    type=2000 audit(1216632057.064:1): initialized
    initcall audit_init+0x0/0xc4 returned 0 after 0 msecs
    calling init_kprobes+0x0/0xfc
    Kprobe smoke test started
    Kprobe smoke test passed successfully
    initcall init_kprobes+0x0/0xfc returned 0 after 14 msecs
    calling relay_init+0x0/0x11
    initcall relay_init+0x0/0x11 returned 0 after 0 msecs
    calling utsname_sysctl_init+0x0/0x11
    initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 msecs
    calling init_per_zone_pages_min+0x0/0x48
    initcall init_per_zone_pages_min+0x0/0x48 returned 0 after 0 msecs
    calling pdflush_init+0x0/0x16
    initcall pdflush_init+0x0/0x16 returned 0 after 0 msecs
    calling kswapd_init+0x0/0x1d
    initcall kswapd_init+0x0/0x1d returned 0 after 0 msecs
    calling setup_vmstat+0x0/0x37
    initcall setup_vmstat+0x0/0x37 returned 0 after 0 msecs
    calling init_tmpfs+0x0/0xb9
    initcall init_tmpfs+0x0/0xb9 returned 0 after 0 msecs
    calling slab_sysfs_init+0x0/0xb7
    initcall slab_sysfs_init+0x0/0xb7 returned 0 after 30 msecs
    calling fasync_init+0x0/0x24
    initcall fasync_init+0x0/0x24 returned 0 after 0 msecs
    calling aio_setup+0x0/0x64
    initcall aio_setup+0x0/0x64 returned 0 after 0 msecs
    calling init_mbcache+0x0/0x11
    initcall init_mbcache+0x0/0x11 returned 0 after 0 msecs
    calling dquot_init+0x0/0xdd
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    initcall dquot_init+0x0/0xdd returned 0 after 0 msecs
    calling init_v1_quota_format+0x0/0xf
    initcall init_v1_quota_format+0x0/0xf returned 0 after 0 msecs
    calling dnotify_init+0x0/0x24
    initcall dnotify_init+0x0/0x24 returned 0 after 0 msecs
    calling configfs_init+0x0/0xbb
    initcall configfs_init+0x0/0xbb returned 0 after 0 msecs
    calling init_devpts_fs+0x0/0x33
    initcall init_devpts_fs+0x0/0x33 returned 0 after 0 msecs
    calling init_reiserfs_fs+0x0/0x72
    initcall init_reiserfs_fs+0x0/0x72 returned 0 after 0 msecs
    calling init_ext3_fs+0x0/0x5f
    initcall init_ext3_fs+0x0/0x5f returned 0 after 0 msecs
    calling init_ext4_fs+0x0/0x5f
    initcall init_ext4_fs+0x0/0x5f returned 0 after 0 msecs
    calling journal_init+0x0/0xb6
    initcall journal_init+0x0/0xb6 returned 0 after 1 msecs
    calling journal_init+0x0/0xd3
    initcall journal_init+0x0/0xd3 returned 0 after 1 msecs
    calling init_ramfs_fs+0x0/0xf
    initcall init_ramfs_fs+0x0/0xf returned 0 after 0 msecs
    calling init_fat_fs+0x0/0x46
    initcall init_fat_fs+0x0/0x46 returned 0 after 0 msecs
    calling init_msdos_fs+0x0/0xf
    initcall init_msdos_fs+0x0/0xf returned 0 after 0 msecs
    calling init_bfs_fs+0x0/0x4f
    initcall init_bfs_fs+0x0/0x4f returned 0 after 0 msecs
    calling init_hfsplus_fs+0x0/0x50
    initcall init_hfsplus_fs+0x0/0x50 returned 0 after 0 msecs
    calling vxfs_init+0x0/0x4d
    initcall vxfs_init+0x0/0x4d returned 0 after 0 msecs
    calling init_nfs_fs+0x0/0xfc
    initcall init_nfs_fs+0x0/0xfc returned 0 after 1 msecs
    calling init_nlm+0x0/0x1c
    initcall init_nlm+0x0/0x1c returned 0 after 0 msecs
    calling init_nls_cp437+0x0/0xf
    initcall init_nls_cp437+0x0/0xf returned 0 after 0 msecs
    calling init_nls_cp865+0x0/0xf
    initcall init_nls_cp865+0x0/0xf returned 0 after 0 msecs
    calling init_nls_cp932+0x0/0xf
    initcall init_nls_cp932+0x0/0xf returned 0 after 0 msecs
    calling init_nls_euc_jp+0x0/0x39
    initcall init_nls_euc_jp+0x0/0x39 returned 0 after 0 msecs
    calling init_nls_cp936+0x0/0xf
    initcall init_nls_cp936+0x0/0xf returned 0 after 0 msecs
    calling init_nls_cp949+0x0/0xf
    initcall init_nls_cp949+0x0/0xf returned 0 after 0 msecs
    calling init_nls_cp1251+0x0/0xf
    initcall init_nls_cp1251+0x0/0xf returned 0 after 0 msecs
    calling init_nls_ascii+0x0/0xf
    initcall init_nls_ascii+0x0/0xf returned 0 after 0 msecs
    calling init_nls_iso8859_1+0x0/0xf
    initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 msecs
    calling init_nls_iso8859_13+0x0/0xf
    initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 msecs
    calling init_nls_iso8859_14+0x0/0xf
    initcall init_nls_iso8859_14+0x0/0xf returned 0 after 0 msecs
    calling init_nls_koi8_u+0x0/0xf
    initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 msecs
    calling init_nls_koi8_ru+0x0/0x39
    initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 msecs
    calling init_nls_utf8+0x0/0x1f
    initcall init_nls_utf8+0x0/0x1f returned 0 after 0 msecs
    calling init_sysv_fs+0x0/0x43
    initcall init_sysv_fs+0x0/0x43 returned 0 after 0 msecs
    calling init_ncp_fs+0x0/0x4f
    initcall init_ncp_fs+0x0/0x4f returned 0 after 0 msecs
    calling init_ntfs_fs+0x0/0x199
    NTFS driver 2.1.29 [Flags: R/O].
    initcall init_ntfs_fs+0x0/0x199 returned 0 after 0 msecs
    calling init_autofs4_fs+0x0/0xf
    initcall init_autofs4_fs+0x0/0xf returned 0 after 0 msecs
    calling fuse_init+0x0/0xf8
    fuse init (API version 7.9)
    initcall fuse_init+0x0/0xf8 returned 0 after 0 msecs
    calling ipc_init+0x0/0x20
    msgmni has been set to 1703
    initcall ipc_init+0x0/0x20 returned 0 after 0 msecs
    calling ipc_sysctl_init+0x0/0x11
    initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 msecs
    calling key_proc_init+0x0/0x2c
    initcall key_proc_init+0x0/0x2c returned 0 after 0 msecs
    calling selinux_nf_ip_init+0x0/0x68
    SELinux: Registering netfilter hooks
    initcall selinux_nf_ip_init+0x0/0x68 returned 0 after 0 msecs
    calling init_sel_fs+0x0/0x5a
    initcall init_sel_fs+0x0/0x5a returned 0 after 0 msecs
    calling selnl_init+0x0/0x46
    initcall selnl_init+0x0/0x46 returned 0 after 0 msecs
    calling sel_netif_init+0x0/0x57
    initcall sel_netif_init+0x0/0x57 returned 0 after 0 msecs
    calling sel_netnode_init+0x0/0x68
    initcall sel_netnode_init+0x0/0x68 returned 0 after 0 msecs
    calling sel_netport_init+0x0/0x68
    initcall sel_netport_init+0x0/0x68 returned 0 after 0 msecs
    calling aurule_init+0x0/0x30
    initcall aurule_init+0x0/0x30 returned 0 after 0 msecs
    calling crypto_algapi_init+0x0/0xc
    initcall crypto_algapi_init+0x0/0xc returned 0 after 0 msecs
    calling blkcipher_module_init+0x0/0x24
    initcall blkcipher_module_init+0x0/0x24 returned 0 after 0 msecs
    calling seqiv_module_init+0x0/0xf
    initcall seqiv_module_init+0x0/0xf returned 0 after 0 msecs
    calling cryptomgr_init+0x0/0xf
    initcall cryptomgr_init+0x0/0xf returned 0 after 0 msecs
    calling hmac_module_init+0x0/0xf
    initcall hmac_module_init+0x0/0xf returned 0 after 0 msecs
    calling crypto_xcbc_module_init+0x0/0xf
    initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 msecs
    calling crypto_null_mod_init+0x0/0x67
    initcall crypto_null_mod_init+0x0/0x67 returned 0 after 0 msecs
    calling md5_mod_init+0x0/0xf
    initcall md5_mod_init+0x0/0xf returned 0 after 0 msecs
    calling rmd128_mod_init+0x0/0xf
    initcall rmd128_mod_init+0x0/0xf returned 0 after 0 msecs
    calling sha1_generic_mod_init+0x0/0xf
    initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 msecs
    calling tgr192_mod_init+0x0/0x52
    initcall tgr192_mod_init+0x0/0x52 returned 0 after 0 msecs
    calling crypto_cbc_module_init+0x0/0xf
    initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 msecs
    calling crypto_pcbc_module_init+0x0/0xf
    initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 msecs
    calling crypto_module_init+0x0/0xf
    initcall crypto_module_init+0x0/0xf returned 0 after 0 msecs
    calling crypto_ctr_module_init+0x0/0x33
    initcall crypto_ctr_module_init+0x0/0x33 returned 0 after 0 msecs
    calling des_generic_mod_init+0x0/0x33
    initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 msecs
    calling fcrypt_mod_init+0x0/0xf
    initcall fcrypt_mod_init+0x0/0xf returned 0 after 0 msecs
    calling twofish_mod_init+0x0/0xf
    initcall twofish_mod_init+0x0/0xf returned 0 after 0 msecs
    calling aes_init+0x0/0x2ac
    initcall aes_init+0x0/0x2ac returned 0 after 0 msecs
    calling cast5_mod_init+0x0/0xf
    initcall cast5_mod_init+0x0/0xf returned 0 after 0 msecs
    calling anubis_mod_init+0x0/0xf
    initcall anubis_mod_init+0x0/0xf returned 0 after 0 msecs
    calling deflate_mod_init+0x0/0xf
    initcall deflate_mod_init+0x0/0xf returned 0 after 0 msecs
    calling crypto_authenc_module_init+0x0/0xf
    initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 msecs
    calling noop_init+0x0/0x11
    io scheduler noop registered (default)
    initcall noop_init+0x0/0x11 returned 0 after 0 msecs
    calling init_kmp+0x0/0xf
    initcall init_kmp+0x0/0xf returned 0 after 0 msecs
    calling init_bm+0x0/0xf
    initcall init_bm+0x0/0xf returned 0 after 0 msecs
    calling init_fsm+0x0/0xf
    initcall init_fsm+0x0/0xf returned 0 after 0 msecs
    calling percpu_counter_startup+0x0/0x11
    initcall percpu_counter_startup+0x0/0x11 returned 0 after 0 msecs
    calling audit_classes_init+0x0/0x4f
    initcall audit_classes_init+0x0/0x4f returned 0 after 0 msecs
    calling pci_proc_init+0x0/0x5b
    initcall pci_proc_init+0x0/0x5b returned 0 after 0 msecs
    calling progearbl_init+0x0/0x53
    ALI M7101 PMU not found.
    initcall progearbl_init+0x0/0x53 returned 0 after 0 msecs
    calling cr_backlight_init+0x0/0x60
    INTEL CARILLO RANCH LPC not found.
    Carillo Ranch Backlight Driver Initialized.
    initcall cr_backlight_init+0x0/0x60 returned 0 after 0 msecs
    calling tdfxfb_init+0x0/0xe3
    initcall tdfxfb_init+0x0/0xe3 returned 0 after 0 msecs
    calling vmlfb_init+0x0/0x81
    vmlfb: initializing
    initcall vmlfb_init+0x0/0x81 returned 0 after 0 msecs
    calling arkfb_init+0x0/0x4b
    initcall arkfb_init+0x0/0x4b returned 0 after 0 msecs
    calling sstfb_init+0x0/0x18e
    initcall sstfb_init+0x0/0x18e returned 0 after 0 msecs
    calling uvesafb_init+0x0/0x360
    hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    uvesafb: failed to execute /sbin/v86d
    uvesafb: make sure that the v86d helper is installed and executable
    uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
    uvesafb: vbe_init() failed with -22
    uvesafb: probe of uvesafb.0 failed with error -22
    initcall uvesafb_init+0x0/0x360 returned 0 after 0 msecs
    calling efifb_init+0x0/0x41
    initcall efifb_init+0x0/0x41 returned -19 after 0 msecs
    calling acpi_reserve_resources+0x0/0xc8
    initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 0 msecs
    calling acpi_fan_init+0x0/0x2c
    initcall acpi_fan_init+0x0/0x2c returned 0 after 0 msecs
    calling irqrouter_init_sysfs+0x0/0x33
    initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 0 msecs
    calling acpi_pci_slot_init+0x0/0x1b
    initcall acpi_pci_slot_init+0x0/0x1b returned 0 after 0 msecs
    calling acpi_container_init+0x0/0x3d
    Clocksource tsc unstable (delta = -63036542 ns)
    initcall acpi_container_init+0x0/0x3d returned 0 after 14 msecs
    calling asus_acpi_init+0x0/0xe2
    initcall asus_acpi_init+0x0/0xe2 returned -19 after 0 msecs
    calling toshiba_acpi_init+0x0/0x159
    initcall toshiba_acpi_init+0x0/0x159 returned -19 after 0 msecs
    calling rand_initialize+0x0/0x25
    initcall rand_initialize+0x0/0x25 returned 0 after 0 msecs
    calling tty_init+0x0/0x18f
    initcall tty_init+0x0/0x18f returned 0 after 15 msecs
    calling pty_init+0x0/0x37d
    usb 5-2: new full speed USB device using uhci_hcd and address 2
    initcall pty_init+0x0/0x37d returned 0 after 113 msecs
    calling moxa_init+0x0/0xf3
    MOXA Intellio family driver version 6.0k
    initcall moxa_init+0x0/0xf3 returned 0 after 30 msecs
    calling mxser_module_init+0x0/0x5f8
    MOXA Smartio/Industio family driver version 2.0.3
    initcall mxser_module_init+0x0/0x5f8 returned 0 after 0 msecs
    calling ip2_init+0x0/0x45
    Computone IntelliPort Plus multiport driver version 1.2.14
    initcall ip2_init+0x0/0x45 returned 0 after 0 msecs
    calling riscom8_init_module+0x0/0x3bd
    rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
    rc0: RISCom/8 Board at 0x220 not found.
    rc1: RISCom/8 Board at 0x240 not found.
    rc2: RISCom/8 Board at 0x250 not found.
    rc3: RISCom/8 Board at 0x260 not found.
    rc: No RISCom/8 boards detected.
    initcall riscom8_init_module+0x0/0x3bd returned -5 after 19 msecs
    initcall riscom8_init_module+0x0/0x3bd returned with error code -5
    calling applicom_init+0x0/0x42c
    Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
    ac.o: No PCI boards found.
    ac.o: For an ISA board you must supply memory and irq parameters.
    initcall applicom_init+0x0/0x42c returned -6 after 0 msecs
    initcall applicom_init+0x0/0x42c returned with error code -6
    calling hpet_init+0x0/0x57
    hpet_acpi_add: no address or irqs in _CRS
    initcall hpet_init+0x0/0x57 returned 0 after 0 msecs
    calling nvram_init+0x0/0x75
    Non-volatile memory driver v1.2
    initcall nvram_init+0x0/0x75 returned 0 after 0 msecs
    calling toshiba_init+0x0/0x31a
    toshiba: not a supported Toshiba laptop
    initcall toshiba_init+0x0/0x31a returned -19 after 0 msecs
    calling i8k_init+0x0/0x174
    initcall i8k_init+0x0/0x174 returned -19 after 0 msecs
    calling cs5535_gpio_init+0x0/0x147
    cs5535_gpio: DIVIL not found
    initcall cs5535_gpio_init+0x0/0x147 returned -19 after 0 msecs
    calling agp_init+0x0/0x21
    Linux agpgart interface v0.103
    initcall agp_init+0x0/0x21 returned 0 after 0 msecs
    calling agp_ati_init+0x0/0x24
    initcall agp_ati_init+0x0/0x24 returned 0 after 0 msecs
    calling agp_intel_init+0x0/0x24
    agpgart: Detected an Intel 945GM Chipset.
    agpgart: Detected 7932K stolen memory.
    usb 5-2: ep0 maxpacket = 8
    agpgart: AGP aperture is 256M @ 0xd0000000
    initcall agp_intel_init+0x0/0x24 returned 0 after 18 msecs
    calling agp_sis_init+0x0/0x24
    initcall agp_sis_init+0x0/0x24 returned 0 after 0 msecs
    calling agp_via_init+0x0/0x24
    initcall agp_via_init+0x0/0x24 returned 0 after 0 msecs
    calling ipmi_init_msghandler_mod+0x0/0xc
    ipmi message handler version 39.2
    initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 0 msecs
    calling init_ipmi_si+0x0/0x6ee
    IPMI System Interface driver.
    ipmi_si: Unable to find any System Interface(s)
    initcall init_ipmi_si+0x0/0x6ee returned -19 after 1 msecs
    calling ipmi_wdog_init+0x0/0xfe
    IPMI Watchdog: driver initialized
    initcall ipmi_wdog_init+0x0/0xfe returned 0 after 0 msecs
    calling init_atmel+0x0/0x167
    initcall init_atmel+0x0/0x167 returned -19 after 0 msecs
    calling drm_core_init+0x0/0xcc
    [drm] Initialized drm 1.1.0 20060810
    initcall drm_core_init+0x0/0xcc returned 0 after 0 msecs
    calling i810_init+0x0/0x19
    initcall i810_init+0x0/0x19 returned 0 after 0 msecs
    calling i915_init+0x0/0x19
    pci 0000:00:02.0: power state changed by ACPI to D0
    Pin 1-16 already programmed
    pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    [drm] Initialized i915 1.6.0 20060119 on minor 0
    initcall i915_init+0x0/0x19 returned 0 after 0 msecs
    calling cn_proc_init+0x0/0x30
    initcall cn_proc_init+0x0/0x30 returned 0 after 0 msecs
    calling i810fb_init+0x0/0x35a
    initcall i810fb_init+0x0/0x35a returned 0 after 0 msecs
    calling serial8250_init+0x0/0x10c
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    initcall serial8250_init+0x0/0x10c returned 0 after 2 msecs
    calling serial8250_pnp_init+0x0/0xf
    pnp: the driver 'serial' has been registered
    initcall serial8250_pnp_init+0x0/0xf returned 0 after 0 msecs
    calling serial8250_pci_init+0x0/0x16
    initcall serial8250_pci_init+0x0/0x16 returned 0 after 0 msecs
    calling fourport_init+0x0/0xf
    initcall fourport_init+0x0/0xf returned 0 after 6 msecs
    calling accent_init+0x0/0xf
    initcall accent_init+0x0/0xf returned 0 after 0 msecs
    calling exar_init+0x0/0xf
    initcall exar_init+0x0/0xf returned 0 after 2 msecs
    calling hub6_init+0x0/0xf
    usb 5-2: default language 0x0409
    initcall hub6_init+0x0/0xf returned 0 after 8 msecs
    calling jsm_init_module+0x0/0x3a
    initcall jsm_init_module+0x0/0x3a returned 0 after 0 msecs
    calling isa_bus_init+0x0/0x33
    initcall isa_bus_init+0x0/0x33 returned 0 after 0 msecs
    calling topology_sysfs_init+0x0/0x36
    initcall topology_sysfs_init+0x0/0x36 returned 0 after 0 msecs
    calling xd_init+0x0/0x47a
    xd: Out of memory.
    initcall xd_init+0x0/0x47a returned -12 after 0 msecs
    initcall xd_init+0x0/0x47a returned with error code -12
    calling cpqarray_init+0x0/0x22b
    Compaq SMART2 Driver (v 2.6.0)
    initcall cpqarray_init+0x0/0x22b returned 0 after 0 msecs
    calling mm_init+0x0/0x146
    MM: desc_per_page = 128
    initcall mm_init+0x0/0x146 returned 0 after 0 msecs
    calling nbd_init+0x0/0x28a
    nbd: registered device at major 43
    initcall nbd_init+0x0/0x28a returned 0 after 10 msecs
    calling carm_init+0x0/0x16
    initcall carm_init+0x0/0x16 returned 0 after 0 msecs
    calling compal_init+0x0/0xed
    initcall compal_init+0x0/0xed returned -19 after 0 msecs
    calling lkdtm_module_init+0x0/0x1bf
    lkdtm : Invalid command
    initcall lkdtm_module_init+0x0/0x1bf returned -22 after 0 msecs
    initcall lkdtm_module_init+0x0/0x1bf returned with error code -22
    calling ioc4_init+0x0/0x16
    initcall ioc4_init+0x0/0x16 returned 0 after 0 msecs
    calling sm501_base_init+0x0/0x20
    usb 5-2: uevent
    usb 5-2: usb_probe_device
    usb 5-2: configuration #1 chosen from 1 choice
    initcall sm501_base_init+0x0/0x20 returned 0 after 0 msecs
    calling pasic3_base_init+0x0/0x14
    initcall pasic3_base_init+0x0/0x14 returned -19 after 0 msecs
    calling e1000_init_module+0x0/0x53
    e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
    e1000e: Copyright (c) 1999-2008 Intel Corporation.
    e1000e 0000:02:00.0: Disabling L1 ASPM
    vendor=8086 device=27d0
    Pin 1-16 already programmed
    e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    usb 5-2: adding 5-2:1.0 (config #1, interface 0)
    usb 5-2:1.0: uevent
    usb 5-2: New USB device found, idVendor=0483, idProduct=2016
    usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-2: Product: Biometric Coprocessor
    usb 5-2: Manufacturer: STMicroelectronics
    eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2
    eth0: Intel(R) PRO/1000 Network Connection
    eth0: MAC: 2, PHY: 2, PBA No: 005301-003
    initcall e1000_init_module+0x0/0x53 returned 0 after 82 msecs
    calling ixgb_init_module+0x0/0x39
    Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
    Copyright (c) 1999-2008 Intel Corporation.
    initcall ixgb_init_module+0x0/0x39 returned 0 after 0 msecs
    calling t1_init_module+0x0/0x16
    initcall t1_init_module+0x0/0x16 returned 0 after 0 msecs
    calling cxgb3_init_module+0x0/0x1b
    initcall cxgb3_init_module+0x0/0x1b returned 0 after 0 msecs
    calling vcan_init_module+0x0/0x2e
    vcan: Virtual CAN interface driver
    initcall vcan_init_module+0x0/0x2e returned 0 after 0 msecs
    calling happy_meal_probe+0x0/0x16
    initcall happy_meal_probe+0x0/0x16 returned 0 after 0 msecs
    calling vortex_init+0x0/0xbf
    initcall vortex_init+0x0/0xbf returned 0 after 0 msecs
    calling pcnet32_init_module+0x0/0x118
    pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
    initcall pcnet32_init_module+0x0/0x118 returned 0 after 0 msecs
    calling eepro100_init_module+0x0/0x16
    initcall eepro100_init_module+0x0/0x16 returned 0 after 0 msecs
    calling e100_init_module+0x0/0x4d
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    initcall e100_init_module+0x0/0x4d returned 0 after 0 msecs
    calling epic_init+0x0/0x16
    initcall epic_init+0x0/0x16 returned 0 after 0 msecs
    calling r6040_init+0x0/0x16
    initcall r6040_init+0x0/0x16 returned 0 after 0 msecs
    calling yellowfin_init+0x0/0x16
    initcall yellowfin_init+0x0/0x16 returned 0 after 0 msecs
    calling ns83820_init+0x0/0x20
    ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    initcall ns83820_init+0x0/0x20 returned 0 after 0 msecs
    calling tg3_init+0x0/0x16
    initcall tg3_init+0x0/0x16 returned 0 after 0 msecs
    calling bnx2_init+0x0/0x16
    initcall bnx2_init+0x0/0x16 returned 0 after 0 msecs
    calling bnx2x_init+0x0/0x16
    initcall bnx2x_init+0x0/0x16 returned 0 after 0 msecs
    calling skfd_init+0x0/0x16
    initcall skfd_init+0x0/0x16 returned 0 after 0 msecs
    calling net_olddevs_init+0x0/0x81
    initcall net_olddevs_init+0x0/0x81 returned 0 after 8 msecs
    calling init_nic+0x0/0x16
    initcall init_nic+0x0/0x16 returned 0 after 0 msecs
    calling ppp_init+0x0/0x83
    PPP generic driver version 2.4.2
    initcall ppp_init+0x0/0x83 returned 0 after 0 msecs
    calling deflate_init+0x0/0x30
    PPP Deflate Compression module registered
    initcall deflate_init+0x0/0x30 returned 0 after 0 msecs
    calling pppox_init+0x0/0xf
    NET: Registered protocol family 24
    initcall pppox_init+0x0/0xf returned 0 after 0 msecs
    calling pppoe_init+0x0/0x81
    initcall pppoe_init+0x0/0x81 returned 0 after 0 msecs
    calling slip_init+0x0/0x98
    SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
    CSLIP: code copyright 1989 Regents of the University of California.
    initcall slip_init+0x0/0x98 returned 0 after 0 msecs
    calling dummy_init_module+0x0/0x95
    initcall dummy_init_module+0x0/0x95 returned 0 after 0 msecs
    calling macvlan_init_module+0x0/0x45
    initcall macvlan_init_module+0x0/0x45 returned 0 after 0 msecs
    calling rtl8139_init_module+0x0/0x16
    initcall rtl8139_init_module+0x0/0x16 returned 0 after 0 msecs
    calling znet_probe+0x0/0x2bd
    initcall znet_probe+0x0/0x2bd returned -19 after 0 msecs
    calling depca_module_init+0x0/0xd4
    initcall depca_module_init+0x0/0xd4 returned 0 after 0 msecs
    calling lp486e_init_module+0x0/0x240
    eth%d: i82596 initialization timed out
    initcall lp486e_init_module+0x0/0x240 returned -19 after 0 msecs
    calling s2io_starter+0x0/0x16
    initcall s2io_starter+0x0/0x16 returned 0 after 0 msecs
    calling enc28j60_init+0x0/0x1e
    initcall enc28j60_init+0x0/0x1e returned 0 after 0 msecs
    calling arcnet_init+0x0/0x50
    arcnet loaded.
    initcall arcnet_init+0x0/0x50 returned 0 after 0 msecs
    calling arcnet_rfc1201_init+0x0/0x65
    arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
    initcall arcnet_rfc1201_init+0x0/0x65 returned 0 after 0 msecs
    calling kaweth_init+0x0/0x25
    drivers/net/usb/kaweth.c: Driver loading
    usbcore: registered new interface driver kaweth
    initcall kaweth_init+0x0/0x25 returned 0 after 0 msecs
    calling pegasus_init+0x0/0x150
    pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
    usbcore: registered new interface driver pegasus
    initcall pegasus_init+0x0/0x150 returned 0 after 0 msecs
    calling tulip_init+0x0/0x2a
    initcall tulip_init+0x0/0x2a returned 0 after 0 msecs
    calling uli526x_init_module+0x0/0x8d
    uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
    initcall uli526x_init_module+0x0/0x8d returned 0 after 0 msecs
    calling init_netconsole+0x0/0x1bb
    netconsole: local port 4444
    netconsole: local IP 10.0.1.15
    netconsole: interface eth0
    netconsole: remote port 4444
    netconsole: remote IP 10.0.1.16
    netconsole: remote ethernet address 00:19:d1:01:f5:55
    netconsole: device eth0 not up yet, forcing it
    usb usb2: suspend_rh (auto-stop)
    usb usb3: suspend_rh (auto-stop)
    usb usb4: suspend_rh (auto-stop)
    hub 2-0:1.0: hub_suspend
    usb usb2: bus auto-suspend
    usb usb2: suspend_rh
    hub 1-0:1.0: hub_suspend
    usb usb1: bus auto-suspend
    ehci_hcd 0000:00:1d.7: suspend root hub
    hub 3-0:1.0: hub_suspend
    usb usb3: bus auto-suspend
    usb usb3: suspend_rh
    hub 4-0:1.0: hub_suspend
    usb usb4: bus auto-suspend
    usb usb4: suspend_rh
    netconsole: timeout waiting for carrier
    eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
    console [netcon0] enabled
    netconsole: network logging started
    initcall init_netconsole+0x0/0x1bb returned 0 after 3837 msecs
    calling scsi_tgt_init+0x0/0x75
    initcall scsi_tgt_init+0x0/0x75 returned 0 after 0 msecs
    calling spi_transport_init+0x0/0x27
    initcall spi_transport_init+0x0/0x27 returned 0 after 0 msecs
    calling hp_sw_init+0x0/0xf
    initcall hp_sw_init+0x0/0xf returned 0 after 0 msecs
    calling clariion_init+0x0/0x26
    initcall clariion_init+0x0/0x26 returned 0 after 0 msecs
    calling ahc_linux_init+0x0/0x61
    initcall ahc_linux_init+0x0/0x61 returned 0 after 0 msecs
    calling init_st+0x0/0x146
    st: Version 20080224, fixed bufsize 32768, s/g segs 256
    Driver 'st' needs updating - please use bus_type methods
    initcall init_st+0x0/0x146 returned 0 after 0 msecs
    calling init_sd+0x0/0xb1
    Driver 'sd' needs updating - please use bus_type methods
    initcall init_sd+0x0/0xb1 returned 0 after 0 msecs
    calling init_ch_module+0x0/0x87
    SCSI Media Changer driver v0.25
    Driver 'ch' needs updating - please use bus_type methods
    initcall init_ch_module+0x0/0x87 returned 0 after 0 msecs
    calling ahci_init+0x0/0x16
    ahci 0000:00:1f.2: version 3.0
    Pin 1-16 already programmed
    ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 222
    ata2: DUMMY
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
    ata1.00: 156301488 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2
    sd 0:0:0:0: [sda] Attached SCSI disk
    initcall ahci_init+0x0/0x16 returned 0 after 1021 msecs
    calling piix_init+0x0/0x24
    ata_piix 0000:00:1f.1: version 2.12
    Pin 1-16 already programmed
    ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi4 : ata_piix
    scsi5 : ata_piix
    ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
    ata5.00: configured for UDMA/33
    ata6: port disabled. ignoring.
    scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
    initcall piix_init+0x0/0x24 returned 0 after 161 msecs
    calling qs_ata_init+0x0/0x16
    initcall qs_ata_init+0x0/0x16 returned 0 after 0 msecs
    calling svia_init+0x0/0x16
    initcall svia_init+0x0/0x16 returned 0 after 0 msecs
    calling vsc_sata_init+0x0/0x16
    initcall vsc_sata_init+0x0/0x16 returned 0 after 0 msecs
    calling pdc_sata_init+0x0/0x16
    initcall pdc_sata_init+0x0/0x16 returned 0 after 0 msecs
    calling nv_init+0x0/0x16
    initcall nv_init+0x0/0x16 returned 0 after 0 msecs
    calling amd_init+0x0/0x16
    initcall amd_init+0x0/0x16 returned 0 after 0 msecs
    calling artop_init+0x0/0x16
    initcall artop_init+0x0/0x16 returned 0 after 0 msecs
    calling atiixp_init+0x0/0x16
    initcall atiixp_init+0x0/0x16 returned 0 after 0 msecs
    calling cmd64x_init+0x0/0x16
    initcall cmd64x_init+0x0/0x16 returned 0 after 0 msecs
    calling efar_init+0x0/0x16
    initcall efar_init+0x0/0x16 returned 0 after 0 msecs
    calling hpt3x2n_init+0x0/0x16
    initcall hpt3x2n_init+0x0/0x16 returned 0 after 0 msecs
    calling it8213_init+0x0/0x16
    initcall it8213_init+0x0/0x16 returned 0 after 0 msecs
    calling ninja32_init+0x0/0x16
    initcall ninja32_init+0x0/0x16 returned 0 after 0 msecs
    calling mpiix_init+0x0/0x16
    initcall mpiix_init+0x0/0x16 returned 0 after 0 msecs
    calling oldpiix_init+0x0/0x16
    initcall oldpiix_init+0x0/0x16 returned 0 after 0 msecs
    calling via_init+0x0/0x16
    initcall via_init+0x0/0x16 returned 0 after 0 msecs
    calling sl82c105_init+0x0/0x16
    initcall sl82c105_init+0x0/0x16 returned 0 after 0 msecs
    calling sis_init+0x0/0x16
    initcall sis_init+0x0/0x16 returned 0 after 0 msecs
    calling triflex_init+0x0/0x16
    initcall triflex_init+0x0/0x16 returned 0 after 0 msecs
    calling ata_generic_init+0x0/0x16
    initcall ata_generic_init+0x0/0x16 returned 0 after 0 msecs
    calling legacy_init+0x0/0x865
    initcall legacy_init+0x0/0x865 returned -19 after 0 msecs
    calling i2o_iop_init+0x0/0x41
    I2O subsystem v1.325
    i2o: max drivers = 8
    initcall i2o_iop_init+0x0/0x41 returned 0 after 0 msecs
    calling i2o_block_init+0x0/0xf7
    I2O Block Device OSM v1.325
    initcall i2o_block_init+0x0/0xf7 returned 0 after 0 msecs
    calling i2o_proc_init+0x0/0x14e
    I2O ProcFS OSM v1.316
    initcall i2o_proc_init+0x0/0x14e returned 0 after 0 msecs
    calling uio_init+0x0/0x7
    initcall uio_init+0x0/0x7 returned 0 after 0 msecs
    calling smx_ce_init_module+0x0/0xf
    initcall smx_ce_init_module+0x0/0xf returned 0 after 0 msecs
    calling mon_init+0x0/0xee
    initcall mon_init+0x0/0xee returned 0 after 1 msecs
    calling isp116x_init+0x0/0x38
    116x: driver isp116x-hcd, 03 Nov 2005
    initcall isp116x_init+0x0/0x38 returned 0 after 0 msecs
    calling r8a66597_init+0x0/0x38
    r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
    initcall r8a66597_init+0x0/0x38 returned 0 after 0 msecs
    calling c67x00_init+0x0/0xf
    initcall c67x00_init+0x0/0xf returned 0 after 0 msecs
    calling usb_stor_init+0x0/0x42
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    initcall usb_stor_init+0x0/0x42 returned 0 after 0 msecs
    calling usb_usual_init+0x0/0x32
    usbcore: registered new interface driver libusual
    initcall usb_usual_init+0x0/0x32 returned 0 after 0 msecs
    calling appledisplay_init+0x0/0x4e
    usbcore: registered new interface driver appledisplay
    initcall appledisplay_init+0x0/0x4e returned 0 after 0 msecs
    calling cypress_init+0x0/0x2f
    usbcore: registered new interface driver cypress_cy7c63
    initcall cypress_init+0x0/0x2f returned 0 after 0 msecs
    calling usb_cytherm_init+0x0/0x3c
    usbcore: registered new interface driver cytherm
    cytherm: v1.0:Cypress USB Thermometer driver
    initcall usb_cytherm_init+0x0/0x3c returned 0 after 0 msecs
    calling isight_firmware_init+0x0/0x16
    usbcore: registered new interface driver isight_firmware
    initcall isight_firmware_init+0x0/0x16 returned 0 after 0 msecs
    calling usb_lcd_init+0x0/0x2f
    usbcore: registered new interface driver usblcd
    initcall usb_lcd_init+0x0/0x2f returned 0 after 0 msecs
    calling usb_sisusb_init+0x0/0x1b
    usbcore: registered new interface driver sisusb
    initcall usb_sisusb_init+0x0/0x1b returned 0 after 0 msecs
    calling usbatm_usb_init+0x0/0x5c
    drivers/usb/atm/usbatm.c: usbatm_usb_init: driver version 1.10
    initcall usbatm_usb_init+0x0/0x5c returned 0 after 0 msecs
    calling init+0x0/0x16
    initcall init+0x0/0x16 returned 0 after 0 msecs
    calling init+0x0/0xa7
    Printer Gadget: usb_gadget_register_driver ffffffed
    initcall init+0x0/0xa7 returned -19 after 0 msecs
    calling i8042_init+0x0/0x31e
    pnp: the driver 'i8042 kbd' has been registered
    i8042 kbd 00:08: driver attached
    pnp: the driver 'i8042 aux' has been registered
    i8042 aux 00:09: driver attached
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    initcall i8042_init+0x0/0x31e returned 0 after 9 msecs
    calling mousedev_init+0x0/0x51
    mice: PS/2 mouse device common for all mice
    initcall mousedev_init+0x0/0x51 returned 0 after 0 msecs
    calling joydev_init+0x0/0xf
    initcall joydev_init+0x0/0xf returned 0 after 0 msecs
    calling evdev_init+0x0/0xf
    initcall evdev_init+0x0/0xf returned 0 after 0 msecs
    calling atkbd_init+0x0/0x20
    initcall atkbd_init+0x0/0x20 returned 0 after 0 msecs
    calling lkkbd_init+0x0/0x16
    input: AT Translated Set 2 keyboard as /class/input/input0
    initcall lkkbd_init+0x0/0x16 returned 0 after 11 msecs
    calling skbd_init+0x0/0x16
    initcall skbd_init+0x0/0x16 returned 0 after 0 msecs
    calling inport_init+0x0/0x122
    inport.c: Didn't find InPort mouse at 0x23c
    initcall inport_init+0x0/0x122 returned -19 after 0 msecs
    calling gpio_mouse_init+0x0/0x14
    initcall gpio_mouse_init+0x0/0x14 returned -19 after 0 msecs
    calling cobra_init+0x0/0x13
    initcall cobra_init+0x0/0x13 returned 0 after 0 msecs
    calling gf2k_init+0x0/0x13
    initcall gf2k_init+0x0/0x13 returned 0 after 0 msecs
    calling grip_init+0x0/0x13
    initcall grip_init+0x0/0x13 returned 0 after 0 msecs
    calling iforce_init+0x0/0x7
    initcall iforce_init+0x0/0x7 returned 0 after 0 msecs
    calling stinger_init+0x0/0x16
    initcall stinger_init+0x0/0x16 returned 0 after 0 msecs
    calling warrior_init+0x0/0x16
    initcall warrior_init+0x0/0x16 returned 0 after 0 msecs
    calling zhenhua_init+0x0/0x16
    initcall zhenhua_init+0x0/0x16 returned 0 after 0 msecs
    calling aiptek_init+0x0/0x38
    usbcore: registered new interface driver aiptek
    aiptek: v2.3 (May 2, 2007): Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
    aiptek: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
    initcall aiptek_init+0x0/0x38 returned 0 after 0 msecs
    calling kbtab_init+0x0/0x2d
    usbcore: registered new interface driver kbtab
    kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
    initcall kbtab_init+0x0/0x2d returned 0 after 0 msecs
    calling wacom_init+0x0/0x37
    usbcore: registered new interface driver wacom
    wacom: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver
    initcall wacom_init+0x0/0x37 returned 0 after 0 msecs
    calling ati_remote_init+0x0/0x3c
    usbcore: registered new interface driver ati_remote
    ati_remote: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
    initcall ati_remote_init+0x0/0x3c returned 0 after 0 msecs
    calling ati_remote2_init+0x0/0x3c
    usbcore: registered new interface driver ati_remote2
    ati_remote2: ATI/Philips USB RF remote driver 0.2
    initcall ati_remote2_init+0x0/0x3c returned 0 after 0 msecs
    calling powermate_init+0x0/0x16
    usbcore: registered new interface driver powermate
    initcall powermate_init+0x0/0x16 returned 0 after 0 msecs
    calling uinput_init+0x0/0xf
    initcall uinput_init+0x0/0xf returned 0 after 0 msecs
    calling i2c_amd8111_init+0x0/0x16
    initcall i2c_amd8111_init+0x0/0x16 returned 0 after 0 msecs
    calling i2c_sis96x_init+0x0/0x16
    initcall i2c_sis96x_init+0x0/0x16 returned 0 after 0 msecs
    calling i2c_vt586b_init+0x0/0x16
    initcall i2c_vt586b_init+0x0/0x16 returned 0 after 0 msecs
    calling i2c_vt596_init+0x0/0x16
    initcall i2c_vt596_init+0x0/0x16 returned 0 after 0 msecs
    calling i2c_gpio_init+0x0/0x2d
    i2c-gpio: probe failed: -19
    initcall i2c_gpio_init+0x0/0x2d returned -19 after 0 msecs
    calling i2c_parport_init+0x0/0x144
    i2c-parport-light: adapter type unspecified
    initcall i2c_parport_init+0x0/0x144 returned -19 after 0 msecs
    calling i2c_voodoo3_init+0x0/0x16
    initcall i2c_voodoo3_init+0x0/0x16 returned 0 after 0 msecs
    calling scx200_acb_init+0x0/0x204
    scx200_acb: NatSemi SCx200 ACCESS.bus Driver
    initcall scx200_acb_init+0x0/0x204 returned -19 after 0 msecs
    calling ds1682_init+0x0/0x11
    i2c-core: driver [ds1682] registered
    initcall ds1682_init+0x0/0x11 returned 0 after 0 msecs
    calling eeprom_init+0x0/0x11
    i2c-core: driver [eeprom] registered
    initcall eeprom_init+0x0/0x11 returned 0 after 0 msecs
    calling max6875_init+0x0/0x11
    i2c-core: driver [max6875] registered
    initcall max6875_init+0x0/0x11 returned 0 after 0 msecs
    calling pcf8591_init+0x0/0x32
    i2c-core: driver [pcf8591] registered
    initcall pcf8591_init+0x0/0x32 returned 0 after 0 msecs
    calling w1_init+0x0/0xe4
    Driver for 1-wire Dallas network protocol.
    initcall w1_init+0x0/0xe4 returned 0 after 0 msecs
    calling w1_gpio_init+0x0/0x14
    initcall w1_gpio_init+0x0/0x14 returned -19 after 0 msecs
    calling w1_smem_init+0x0/0x33
    initcall w1_smem_init+0x0/0x33 returned 0 after 0 msecs
    calling w1_ds2760_init+0x0/0x23
    1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
    initcall w1_ds2760_init+0x0/0x23 returned 0 after 0 msecs
    calling ds2760_battery_init+0x0/0xf
    initcall ds2760_battery_init+0x0/0xf returned 0 after 0 msecs
    calling bpa10x_init+0x0/0x25
    Bluetooth: Digianswer Bluetooth USB driver ver 0.9
    usbcore: registered new interface driver bpa10x
    initcall bpa10x_init+0x0/0x25 returned 0 after 0 msecs
    calling btsdio_init+0x0/0x1e
    Bluetooth: Generic Bluetooth SDIO driver ver 0.1
    initcall btsdio_init+0x0/0x1e returned 0 after 0 msecs
    calling pci_eisa_init_module+0x0/0x16
    initcall pci_eisa_init_module+0x0/0x16 returned 0 after 0 msecs
    calling cpufreq_stats_init+0x0/0x80
    initcall cpufreq_stats_init+0x0/0x80 returned 0 after 0 msecs
    calling mmc_test_init+0x0/0xf
    initcall mmc_test_init+0x0/0xf returned 0 after 0 msecs
    calling tifm_sd_init+0x0/0xf
    initcall tifm_sd_init+0x0/0xf returned 0 after 0 msecs
    calling gpio_led_init+0x0/0xf
    Registered led device: rdc:dmz
    initcall gpio_led_init+0x0/0xf returned 0 after 0 msecs
    calling ioat_init_module+0x0/0x16
    initcall ioat_init_module+0x0/0x16 returned 0 after 0 msecs
    calling dca_init+0x0/0xa
    initcall dca_init+0x0/0xa returned 0 after 0 msecs
    calling virtio_pci_init+0x0/0x3a
    initcall virtio_pci_init+0x0/0x3a returned 0 after 0 msecs
    calling oprofile_init+0x0/0x47
    oprofile: using NMI interrupt.
    initcall oprofile_init+0x0/0x47 returned 0 after 0 msecs
    calling sysctl_core_init+0x0/0x1e
    initcall sysctl_core_init+0x0/0x1e returned 0 after 0 msecs
    calling flow_cache_init+0x0/0x139
    initcall flow_cache_init+0x0/0x139 returned 0 after 0 msecs
    calling llc_init+0x0/0x1b
    initcall llc_init+0x0/0x1b returned 0 after 0 msecs
    calling snap_init+0x0/0x2a
    initcall snap_init+0x0/0x2a returned 0 after 0 msecs
    calling xt_init+0x0/0x7e
    initcall xt_init+0x0/0x7e returned 0 after 0 msecs
    calling tcpudp_mt_init+0x0/0x14
    initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 msecs
    calling classify_tg_init+0x0/0x14
    initcall classify_tg_init+0x0/0x14 returned 0 after 0 msecs
    calling dccp_mt_init+0x0/0x45
    initcall dccp_mt_init+0x0/0x45 returned 0 after 0 msecs
    calling dscp_mt_init+0x0/0x14
    initcall dscp_mt_init+0x0/0x14 returned 0 after 0 msecs
    calling iprange_mt_init+0x0/0x14
    initcall iprange_mt_init+0x0/0x14 returned 0 after 0 msecs
    calling pkttype_mt_init+0x0/0x14
    initcall pkttype_mt_init+0x0/0x14 returned 0 after 0 msecs
    calling sctp_mt_init+0x0/0x14
    initcall sctp_mt_init+0x0/0x14 returned 0 after 0 msecs
    calling string_mt_init+0x0/0x14
    initcall string_mt_init+0x0/0x14 returned 0 after 0 msecs
    calling tcpmss_mt_init+0x0/0x14
    initcall tcpmss_mt_init+0x0/0x14 returned 0 after 0 msecs
    calling sysctl_ipv4_init+0x0/0x3f
    initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 1 msecs
    calling xfrm4_mode_tunnel_init+0x0/0x14
    initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 msecs
    calling ipv4_netfilter_init+0x0/0xf
    initcall ipv4_netfilter_init+0x0/0xf returned 0 after 0 msecs
    calling arp_tables_init+0x0/0x78
    arp_tables: (C) 2002 David S. Miller
    initcall arp_tables_init+0x0/0x78 returned 0 after 0 msecs
    calling arpt_mangle_init+0x0/0xf
    initcall arpt_mangle_init+0x0/0xf returned 0 after 0 msecs
    calling cubictcp_register+0x0/0x93
    TCP cubic registered
    initcall cubictcp_register+0x0/0x93 returned 0 after 0 msecs
    calling inet6_init+0x0/0x2e4
    NET: Registered protocol family 10
    initcall inet6_init+0x0/0x2e4 returned 0 after 11 msecs
    calling ah6_init+0x0/0x5a
    initcall ah6_init+0x0/0x5a returned 0 after 0 msecs
    calling esp6_init+0x0/0x5a
    initcall esp6_init+0x0/0x5a returned 0 after 0 msecs
    calling ipcomp6_init+0x0/0x5a
    initcall ipcomp6_init+0x0/0x5a returned 0 after 0 msecs
    calling xfrm6_tunnel_init+0x0/0xdb
    initcall xfrm6_tunnel_init+0x0/0xdb returned 0 after 0 msecs
    calling tunnel6_init+0x0/0x5a
    initcall tunnel6_init+0x0/0x5a returned 0 after 0 msecs
    calling xfrm6_mode_tunnel_init+0x0/0x14
    initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 0 msecs
    calling mip6_init+0x0/0xa7
    Mobile IPv6
    initcall mip6_init+0x0/0xa7 returned 0 after 0 msecs
    calling packet_init+0x0/0x39
    NET: Registered protocol family 17
    initcall packet_init+0x0/0x39 returned 0 after 0 msecs
    calling ipsec_pfkey_init+0x0/0x7a
    NET: Registered protocol family 15
    initcall ipsec_pfkey_init+0x0/0x7a returned 0 after 0 msecs
    calling br_init+0x0/0xa1
    Bridge firewalling registered
    initcall br_init+0x0/0xa1 returned 0 after 0 msecs
    calling lapb_init+0x0/0x7
    initcall lapb_init+0x0/0x7 returned 0 after 0 msecs
    calling can_init+0x0/0xd1
    can: controller area network core (rev 20071116 abi 8)
    NET: Registered protocol family 29
    initcall can_init+0x0/0xd1 returned 0 after 0 msecs
    calling sco_init+0x0/0xc2
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    initcall sco_init+0x0/0xc2 returned 0 after 0 msecs
    calling init_sunrpc+0x0/0x53
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    initcall init_sunrpc+0x0/0x53 returned 0 after 1 msecs
    calling init_rpcsec_gss+0x0/0x2e
    initcall init_rpcsec_gss+0x0/0x2e returned 0 after 0 msecs
    calling init_kerberos_module+0x0/0x26
    initcall init_kerberos_module+0x0/0x26 returned 0 after 0 msecs
    calling lane_module_init+0x0/0x4f
    lec.c: Jul 21 2008 11:15:34 initialized
    initcall lane_module_init+0x0/0x4f returned 0 after 0 msecs
    calling econet_proto_init+0x0/0x186
    NET: Registered protocol family 19
    initcall econet_proto_init+0x0/0x186 returned 0 after 0 msecs
    calling sctp_init+0x0/0x697
    SCTP: Hash tables configured (established 26214 bind 29127)
    sctp_init_sock(sk: f720c000)
    initcall sctp_init+0x0/0x697 returned 0 after 9 msecs
    calling powernowk8_init+0x0/0x6e
    initcall powernowk8_init+0x0/0x6e returned -19 after 0 msecs
    calling hpet_insert_resource+0x0/0x1e
    initcall hpet_insert_resource+0x0/0x1e returned 0 after 0 msecs
    calling lapic_insert_resource+0x0/0x44
    initcall lapic_insert_resource+0x0/0x44 returned 0 after 0 msecs
    calling init_lapic_nmi_sysfs+0x0/0x33
    initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 msecs
    ================================================== ===========================
    BUG skbuff_head_cache: Poison overwritten
    -----------------------------------------------------------------------------

    INFO: 0xf7ccc100-0xf7ccc103. First byte 0x0 instead of 0x6b
    INFO: Allocated in __alloc_skb+0x30/0x10e age=1 cpu=1 pid=1
    INFO: Freed in __kfree_skb+0x63/0x66 age=1 cpu=0 pid=0
    INFO: Slab 0xc1c34ca0 objects=16 used=1 fp=0xf7ccc100 flags=0x400000c3
    INFO: Object 0xf7ccc100 @offset=256 fp=0xf7ccc200

    Bytes b4 0xf7ccc0f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
    Object 0xf7ccc100: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk
    Object 0xf7ccc110: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc120: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc130: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc140: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc150: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc160: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc170: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc180: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc190: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
    Object 0xf7ccc1a0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk�
    Redzone 0xf7ccc1b0: bb bb bb bb ����
    Padding 0xf7ccc1d8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
    Padding 0xf7ccc1e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
    Padding 0xf7ccc1f8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
    Pid: 1, comm: swapper Not tainted 2.6.26-tip #3261
    [] print_trailer+0xd1/0xd9
    [] check_bytes_and_report+0x73/0x8f
    [] check_object+0xa5/0x15a
    [] __slab_alloc+0x2fb/0x3c8
    [] kmem_cache_alloc+0x4b/0xa8
    [] ? __alloc_skb+0x30/0x10e
    [] ? __alloc_skb+0x30/0x10e
    [] __alloc_skb+0x30/0x10e
    [] alloc_skb+0xc/0xe
    [] find_skb+0x28/0x66
    [] netpoll_send_udp+0x2b/0x1cf
    [] ? _spin_lock_irqsave+0x4b/0x55
    [] write_msg+0x79/0xac
    [] ? write_msg+0x0/0xac
    [] __call_console_drivers+0x56/0x63
    [] _call_console_drivers+0x57/0x5b
    [] release_console_sem+0x112/0x1a5
    [] vprintk+0x344/0x35e
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  18. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    On Mon, Jul 21, 2008 at 12:50:51PM +0200, Ingo Molnar (mingo@elte.hu) wrote:
    > > Ingo do you see other similar dumps with last byte modified? That's
    > > the one which can help to determine the reason.

    >
    > the problem is, most of the crashes dont come with any usable dump. This
    > is a laptop so netconsole is the only reliable route out - and if
    > something in networking crashes chances are that it hoses netconsole
    > before it can get anything out.
    >
    > Another thing is that i'm activating netconsole on this box via a kernel
    > boot line and from within a bzImage (to get it activated as early as
    > possible) - maybe that's a tad too early for certain initialization
    > sequences?
    >
    > I could try run tests with netconsole deactivated, if you think that's a
    > worthwile line of probing this problem. (although that would make me do
    > blind tests in essence - having kernel log output is really essential.)


    Let's try this way first. If system will continue to crash, we will add
    some debug options in various pathes. Existing reports do not contain
    enough information unfortunately, so we will not lose too much.

    --
    Evgeniy Polyakov
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  19. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten

    On Fri, Jul 18, 2008 at 1:56 AM, Ingo Molnar wrote:
    >
    > * Vegard Nossum wrote:
    >
    >> On Thu, Jul 17, 2008 at 11:42 PM, Ingo Molnar wrote:
    >> > With this config:
    >> >
    >> > http://redhat.com/~mingo/misc/config..._CEST_2008.bad
    >> >

    >>
    >> It doesn't actually work. The config says
    >>
    >> # head: 088fcf34
    >>
    >> and I checked out this from the tip tree. But kernel-config still
    >> complains about unknown config options... What went wrong?

    >
    > that's ok - i've got some local qa helpers that have config options.
    >
    > Things like making SMP bootups more likely in randconfig, adding various
    > boot parameters to the bootup via .config methods (so that boot
    > parameters can be randomized via make randconfig), etc.


    Hm, your config doesn't contain SLUB_DEBUG either. Isn't that a
    requirement for seeing the BUG you're getting?

    $ grep SLUB config-Thu_Jul_17_20_24_45_CEST_2008.bad
    # CONFIG_SLUB_DEBUG is not set
    CONFIG_SLUB=y

    Did you post the wrong config?


    Vegard

    --
    "The animistic metaphor of the bug that maliciously sneaked in while
    the programmer was not looking is intellectually dishonest as it
    disguises that the error is the programmer's own creation."
    -- E. W. Dijkstra, EWD1036
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  20. Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten


    * Evgeniy Polyakov wrote:

    > > I could try run tests with netconsole deactivated, if you think
    > > that's a worthwile line of probing this problem. (although that
    > > would make me do blind tests in essence - having kernel log output
    > > is really essential.)

    >
    > Let's try this way first. If system will continue to crash, we will
    > add some debug options in various pathes. Existing reports do not
    > contain enough information unfortunately, so we will not lose too
    > much.


    ok. I've turned off netconsole - 8 successful bootups in a row so far.
    The box is a slow booter/builder with an 8 kernels/hour test throughput,
    so if everything goes fine we should have meaningful results in about 10
    hours.

    ( there are other, faster testboxes in -tip testing with 33 kernels/hour
    build+boot throughput where we'd have to wait only 2 hours - but as
    per Murphy's law they dont trigger this bug ;-)

    Ingo
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast