linux-next: Tree for July 16 - Kernel

This is a discussion on linux-next: Tree for July 16 - Kernel ; Hi all, Changes since next-20080715: Temporarily dropped tree: ttydev (it gets too many patch failures). Most of the differences were conflicts moving from tree to tree as some of the trees are now merged into Linus' tree. Most have been ...

+ Reply to Thread
Results 1 to 17 of 17

Thread: linux-next: Tree for July 16

  1. linux-next: Tree for July 16

    Hi all,

    Changes since next-20080715:

    Temporarily dropped tree: ttydev (it gets too many patch failures).

    Most of the differences were conflicts moving from tree to tree as some
    of the trees are now merged into Linus' tree. Most have been inflicted
    on the driver-core and usb trees. I have not notified these separately.

    Because of the moving of conflicts around it is difficult to tell when
    they are going away (though I assume some are).

    The usb.current tree lost its conflict against Linus' tree.

    The usb tree gained a conflict against Linus' tree.

    The cpus4096 tree gained a conflict against Linus' tree.

    The pci tree lost one of its build fix patches.

    The i2c tree lost a conflict against Linus' tree.

    The ide tree gained a lot of conflicts against Linus' tree because part
    of it was merged into Linus' tree but the remaining pat modified many of
    the same files further.

    The acpi tree gained a conflict against Linus' tree.

    The net tree gained a conflict against each of Linus' tree and the
    powerpc tree.

    The sparc tree gained conflicts against Linus' tree and the ide and
    sparc-current trees.

    The rr tree gained conflict against the net tree.

    The semaphore tree gained a conflict against the sparc tree.

    The generic-ipi tree gained a conflict against the powerpc tree.

    The ttydev series had many patches fail to apply, so it was dropped for
    today.

    I have also applied the following patches for known problems:

    sparc64: sysdev API change fallout

    Patches no longer necessary:

    s390: fix compile error due to smp_call_function
    powerpc: mman.h export fixups
    powerpc/stacktrace: EXPORT SYMBOL_GPL needs module.h

    This tree fails to build for ARCH=sparc (i.e. 32bit) with a 64bit gcc
    v3.4.5 - it tries to use the 64bit header files. This may be an artifact
    of one of my merge fixups, but I don't actually think so.

    ----------------------------------------------------------------------------

    I have created today's linux-next tree at
    git://git.kernel.org/pub/scm/linux/kernel/git/sfr/linux-next.git
    (patches at
    http://www.kernel.org/pub/linux/kern...fr/linux-next/). If you
    are tracking the linux-next tree using git, you should not use "git pull"
    to do so as that will try to merge the new linux-next release with the
    old one. You should use "git fetch" as mentioned in the FAQ on the wiki
    (see below).

    You can see which trees have been included by looking in the Next/Trees
    file in the source. There are also quilt-import.log and merge.log files
    in the Next directory. Between each merge, the tree was built with
    a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
    final fixups, it is also built with powerpc allnoconfig,
    44x_defconfig and allyesconfig and i386, sparc and sparc64 defconfig.

    Below is a summary of the state of the merge.

    We are up to 105 trees (counting Linus' and 14 trees of patches pending for
    Linus' tree), more are welcome (even if they are currently empty).
    Thanks to those who have contributed, and to those who haven't, please do.

    Status of my local build tests will be at
    http://kisskb.ellerman.id.au/linux-next . If maintainers want to give
    advice about cross compilers/configs that work, we are always open to add
    more builds.

    Thanks to Jan Dittmer for adding the linux-next tree to his build tests
    at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy
    Dunlap for doing many randconfig builds.

    There is a wiki covering stuff to do with linux-next at
    http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.

    --
    Cheers,
    Stephen Rothwell sfr@canb.auug.org.au

    $ git checkout master
    $ git reset --hard stable
    Merging origin/master
    Merging powerpc-merge/merge
    Merging scsi-rc-fixes/master
    Merging net-current/master
    Merging sparc-current/master
    Merging sound-current/for-linus
    Merging arm-current/master
    Merging pci-current/for-linus
    Merging wireless-current/master
    Merging kbuild-current/master
    Merging quilt/driver-core.current
    Merging quilt/usb.current
    Merging cpufreq-current/fixes
    Merging input-current/for-linus
    Merging md-current/for-2.6.26
    Merging quilt/driver-core
    CONFLICT (content): Merge conflict in arch/arm/kernel/time.c
    CONFLICT (content): Merge conflict in arch/x86/kernel/traps_32.c
    CONFLICT (content): Merge conflict in arch/x86/kernel/traps_64.c
    CONFLICT (content): Merge conflict in drivers/base/topology.c
    CONFLICT (content): Merge conflict in drivers/i2c/i2c-core.c
    CONFLICT (content): Merge conflict in drivers/s390/block/dasd.c
    CONFLICT (content): Merge conflict in drivers/s390/block/dasd_eckd.c
    CONFLICT (content): Merge conflict in drivers/s390/block/dasd_fba.c
    CONFLICT (content): Merge conflict in drivers/s390/char/tape_core.c
    CONFLICT (content): Merge conflict in drivers/s390/cio/device_fsm.c
    CONFLICT (content): Merge conflict in drivers/s390/cio/qdio.c
    CONFLICT (content): Merge conflict in drivers/s390/net/claw.c
    CONFLICT (content): Merge conflict in drivers/s390/net/ctcm_main.c
    CONFLICT (content): Merge conflict in drivers/s390/net/lcs.c
    CONFLICT (content): Merge conflict in drivers/s390/net/netiucv.c
    CONFLICT (content): Merge conflict in sound/pci/maestro3.c
    CONFLICT (content): Merge conflict in sound/pci/ymfpci/ymfpci_main.c
    Merging quilt/usb
    CONFLICT (content): Merge conflict in drivers/usb/gadget/ether.c
    CONFLICT (delete/modify): drivers/usb/serial/io_fw_down3.h deleted in HEAD and modified in quilt/usb. Version quilt/usb of drivers/usb/serial/io_fw_down3.h left in tree.
    CONFLICT (content): Merge conflict in drivers/usb/serial/io_ti.c
    CONFLICT (delete/modify): drivers/usb/serial/ti_fw_3410.h deleted in HEAD and modified in quilt/usb. Version quilt/usb of drivers/usb/serial/ti_fw_3410.h left in tree.
    CONFLICT (delete/modify): drivers/usb/serial/ti_fw_5052.h deleted in HEAD and modified in quilt/usb. Version quilt/usb of drivers/usb/serial/ti_fw_5052.h left in tree.
    CONFLICT (content): Merge conflict in drivers/usb/serial/ti_usb_3410_5052.c
    $ git reset --hard
    $ git checkout -b tmp quilt/usb
    Created commit 094e2d2: Revert "USB: io_ti: FIrst cut at a big clean up"
    $ git checkout master
    CONFLICT (content): Merge conflict in drivers/usb/gadget/ether.c
    CONFLICT (delete/modify): drivers/usb/serial/ti_fw_3410.h deleted in HEAD and modified in tmp. Version tmp of drivers/usb/serial/ti_fw_3410.h left in tree.
    CONFLICT (delete/modify): drivers/usb/serial/ti_fw_5052.h deleted in HEAD and modified in tmp. Version tmp of drivers/usb/serial/ti_fw_5052.h left in tree.
    CONFLICT (content): Merge conflict in drivers/usb/serial/ti_usb_3410_5052.c
    Merging tip-core/auto-core-next
    Merging cpus4096/auto-cpus4096-next
    CONFLICT (content): Merge conflict in arch/x86/xen/smp.c
    CONFLICT (content): Merge conflict in kernel/sched_rt.c
    CONFLICT (content): Merge conflict in net/iucv/iucv.c
    Merging ftrace/auto-ftrace-next
    Merging genirq/auto-genirq-next
    Merging safe-poison-pointers/auto-safe-poison-pointers-next
    Merging sched/auto-sched-next
    Merging stackprotector/auto-stackprotector-next
    CONFLICT (content): Merge conflict in arch/x86/kernel/Makefile
    Merging timers/auto-timers-next
    Merging x86/auto-x86-next
    CONFLICT (content): Merge conflict in arch/x86/kernel/cpu/amd_64.c
    CONFLICT (content): Merge conflict in arch/x86/mm/pageattr.c
    CONFLICT (content): Merge conflict in arch/x86/mm/pat.c
    CONFLICT (content): Merge conflict in arch/x86/pci/i386.c
    $ git reset --hard
    $ git checkout -b tmp x86/auto-x86-next
    Created commit 5a8d263: Revert "Revert "x86: introduce max_low_pfn_mapped for 64-bit""
    $ git checkout master
    Merging pci/linux-next
    CONFLICT (content): Merge conflict in arch/sparc64/kernel/pci.c
    CONFLICT (delete/modify): arch/x86/kernel/setup_64.c deleted in HEAD and modified in pci/linux-next. Version pci/linux-next of arch/x86/kernel/setup_64.c left in tree.
    CONFLICT (content): Merge conflict in arch/x86/pci/irq.c
    CONFLICT (content): Merge conflict in arch/x86/pci/pci.h
    CONFLICT (content): Merge conflict in include/linux/device.h
    Applying pci: usb fixup 1
    Merging quilt/device-mapper
    Merging hid/mm
    Merging quilt/i2c
    Merging quilt/kernel-doc
    Merging avr32/avr32-arch
    Merging v4l-dvb/stable
    Applying v4l-dvb: class_for_each_device API change fallout
    Merging s390/features
    Merging sh/master
    Merging jfs/next
    Merging kbuild/master
    CONFLICT (content): Merge conflict in include/Kbuild
    Created commit 10f999b: Revert "kconfig: normalize int/hex values"
    Merging quilt/ide
    CONFLICT (rename/modify): Merge conflict in drivers/ide/ide-timings.c
    CONFLICT (content): Merge conflict in drivers/ide/Kconfig
    CONFLICT (content): Merge conflict in drivers/ide/Makefile
    CONFLICT (content): Merge conflict in drivers/ide/arm/palm_bk3710.c
    CONFLICT (add/add): Merge conflict in drivers/ide/ide-atapi.c
    CONFLICT (content): Merge conflict in drivers/ide/ide-cd.c
    CONFLICT (content): Merge conflict in drivers/ide/ide-cd_ioctl.c
    CONFLICT (content): Merge conflict in drivers/ide/ide-floppy.c
    CONFLICT (content): Merge conflict in drivers/ide/ide-io.c
    CONFLICT (content): Merge conflict in drivers/ide/ide-iops.c
    CONFLICT (content): Merge conflict in drivers/ide/ide-probe.c
    CONFLICT (content): Merge conflict in drivers/ide/ide-tape.c
    CONFLICT (content): Merge conflict in drivers/ide/ide-taskfile.c
    CONFLICT (content): Merge conflict in drivers/ide/ide.c
    CONFLICT (content): Merge conflict in drivers/ide/legacy/ali14xx.c
    CONFLICT (content): Merge conflict in drivers/ide/legacy/gayle.c
    CONFLICT (content): Merge conflict in drivers/ide/pci/aec62xx.c
    CONFLICT (content): Merge conflict in drivers/ide/pci/amd74xx.c
    CONFLICT (content): Merge conflict in drivers/ide/pci/cmd64x.c
    CONFLICT (content): Merge conflict in drivers/ide/pci/scc_pata.c
    CONFLICT (content): Merge conflict in drivers/ide/pci/via82cxxx.c
    CONFLICT (content): Merge conflict in drivers/ide/ppc/pmac.c
    CONFLICT (content): Merge conflict in drivers/ide/setup-pci.c
    CONFLICT (content): Merge conflict in drivers/scsi/ide-scsi.c
    CONFLICT (content): Merge conflict in include/linux/ide.h
    Merging libata/NEXT
    Merging nfs/linux-next
    Merging xfs/master
    Merging infiniband/for-next
    Merging acpi/test
    CONFLICT (rename/modify): Merge conflict in arch/x86/mm/srat_32.c
    CONFLICT (content): Merge conflict in arch/x86/kernel/acpi/sleep.c
    CONFLICT (content): Merge conflict in arch/x86/kernel/process.c
    CONFLICT (content): Merge conflict in drivers/acpi/processor_throttling.c
    CONFLICT (content): Merge conflict in drivers/acpi/sleep/main.c
    CONFLICT (content): Merge conflict in drivers/pci/pci.c
    CONFLICT (content): Merge conflict in drivers/pci/pci.h
    CONFLICT (content): Merge conflict in include/acpi/acpi_bus.h
    Merging blackfin/for-linus
    Merging nfsd/nfsd-next
    CONFLICT (content): Merge conflict in net/sunrpc/svc.c
    Merging ieee1394/for-next
    Merging hwmon/testing
    Merging ubi/master
    Merging kvm/master
    CONFLICT (content): Merge conflict in arch/x86/kvm/vmx.c
    CONFLICT (content): Merge conflict in virt/kvm/kvm_main.c
    Merging dlm/next
    Merging scsi/master
    CONFLICT (content): Merge conflict in drivers/s390/scsi/zfcp_aux.c
    CONFLICT (content): Merge conflict in drivers/s390/scsi/zfcp_def.h
    Applying scsi: fix fallout from the class_find_device API change
    Applying scsi: fix fallout from KOBJ_NAME_LEN removal
    Merging ia64/test
    Merging tests/master
    CONFLICT (content): Merge conflict in lib/Kconfig.debug
    Merging ocfs2/linux-next
    Merging quilt/m68k
    Merging powerpc/next
    CONFLICT (content): Merge conflict in drivers/macintosh/mediabay.c
    Merging lblnet/master
    Merging ext4/next
    Merging 4xx/next
    Merging async_tx/next
    Merging udf/for_next
    Merging security-testing/next
    Merging net/master
    CONFLICT (content): Merge conflict in Documentation/powerpc/booting-without-of.txt
    CONFLICT (content): Merge conflict in drivers/atm/Makefile
    CONFLICT (content): Merge conflict in drivers/net/fs_enet/fs_enet-main.c
    CONFLICT (content): Merge conflict in drivers/pci/pci-acpi.c
    CONFLICT (content): Merge conflict in net/8021q/vlan.c
    CONFLICT (content): Merge conflict in net/iucv/iucv.c
    Merging sparc/master
    CONFLICT (content): Merge conflict in include/asm-sparc/ide.h
    CONFLICT (content): Merge conflict in include/asm-sparc/smp.h
    CONFLICT (content): Merge conflict in include/asm-sparc64/ide.h
    CONFLICT (content): Merge conflict in include/asm-sparc64/mmu.h
    CONFLICT (content): Merge conflict in include/asm-sparc64/page.h
    CONFLICT (content): Merge conflict in include/asm-sparc64/pgtable.h
    Merging galak/powerpc-next
    Merging mtd/master
    CONFLICT (content): Merge conflict in arch/arm/mach-at91/board-yl-9200.c
    CONFLICT (delete/modify): drivers/mtd/maps/mtx-1_flash.c deleted in HEAD and modified in mtd/master. Version mtd/master of drivers/mtd/maps/mtx-1_flash.c left in tree.
    Merging wireless/master
    Merging crypto/master
    Merging vfs/vfs-2.6.25
    Merging sound/master
    Merging arm/devel
    CONFLICT (rename/delete): Renamed arch/arm/configs/em_x270_defconfig->arch/sh/configs/sh7763rdp_defconfig in HEAD and deleted in arm/devel
    Merging cpufreq/next
    CONFLICT (content): Merge conflict in drivers/cpufreq/cpufreq.c
    Merging v9fs/for-next
    Merging quilt/rr
    CONFLICT (content): Merge conflict in drivers/char/hvc_console.h
    CONFLICT (content): Merge conflict in drivers/net/tun.c
    CONFLICT (content): Merge conflict in include/linux/if_tun.h
    CONFLICT (content): Merge conflict in kernel/stop_machine.c
    CONFLICT (content): Merge conflict in kernel/sysctl.c
    Merging cifs/master
    Merging mmc/next
    Merging gfs2/master
    Merging input/next
    Merging semaphore/semaphore
    CONFLICT (content): Merge conflict in include/asm-sparc64/semaphore.h
    Merging semaphore-removal/semaphore-removal
    CONFLICT (content): Merge conflict in drivers/net/ps3_gelic_wireless.c
    CONFLICT (content): Merge conflict in drivers/scsi/qla2xxx/qla_attr.c
    CONFLICT (content): Merge conflict in drivers/scsi/qla2xxx/qla_def.h
    CONFLICT (content): Merge conflict in drivers/scsi/qla2xxx/qla_mbx.c
    CONFLICT (content): Merge conflict in drivers/scsi/qla2xxx/qla_mid.c
    CONFLICT (content): Merge conflict in drivers/scsi/qla2xxx/qla_os.c
    Merging bkl-removal/bkl-removal
    Merging trivial/next
    CONFLICT (content): Merge conflict in include/linux/securebits.h
    Merging ubifs/for_andrew
    Merging lsm/for-next
    Merging block/for-next
    Merging embedded/master
    Merging firmware/master
    CONFLICT (content): Merge conflict in drivers/media/dvb/ttpci/Makefile
    Merging pcmcia/master
    Merging battery/master
    CONFLICT (content): Merge conflict in drivers/power/Kconfig
    CONFLICT (content): Merge conflict in drivers/power/Makefile
    Merging leds/for-mm
    Merging backlight/for-mm
    CONFLICT (content): Merge conflict in drivers/video/backlight/Kconfig
    CONFLICT (content): Merge conflict in drivers/video/backlight/Makefile
    Merging kgdb/kgdb-next
    Merging slab/for-next
    Merging m68knommu/for-next
    Merging uclinux/for-next
    Merging md/for-next
    Merging cris/for-next
    Merging kmemcheck/auto-kmemcheck-next
    CONFLICT (content): Merge conflict in arch/x86/kernel/traps_64.c
    CONFLICT (content): Merge conflict in arch/x86/mm/Makefile
    CONFLICT (content): Merge conflict in include/asm-x86/pgtable.h
    CONFLICT (content): Merge conflict in init/main.c
    CONFLICT (content): Merge conflict in kernel/sysctl.c
    Merging generic-ipi/auto-generic-ipi-next
    CONFLICT (content): Merge conflict in arch/powerpc/Kconfig
    CONFLICT (content): Merge conflict in arch/x86/kernel/irqinit_64.c
    Merging mips/mips-for-linux-next
    Merging mfd/for-next
    Merging hdlc/hdlc-next
    CONFLICT (content): Merge conflict in drivers/net/wan/cosa.c
    CONFLICT (content): Merge conflict in drivers/net/wan/hdlc_fr.c
    CONFLICT (content): Merge conflict in drivers/net/wan/pc300_drv.c
    Merging drm/drm-next
    CONFLICT (add/add): Merge conflict in drivers/gpu/Makefile
    CONFLICT (add/add): Merge conflict in drivers/gpu/drm/i830/Makefile
    CONFLICT (content): Merge conflict in include/Kbuild
    CONFLICT (add/add): Merge conflict in include/drm/Kbuild
    Merging voltage/reg-for-linus
    Applying sparc64: sysdev API change fallout

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.9 (GNU/Linux)

    iEYEARECAAYFAkh9/JMACgkQjjKRsyhoI8wXZQCfbRH16WOwIVx+Ql8Yzl8P1XHj
    gE8Ani3UZjZZsBrj1NtbBqL9fvGp76zK
    =sA0X
    -----END PGP SIGNATURE-----


  2. Re: linux-next: Tree for July 16

    At Wed, 16 Jul 2008 23:50:11 +1000,
    Stephen Rothwell wrote:
    >
    > Hi all,
    >
    > Changes since next-20080715:
    >
    > Temporarily dropped tree: ttydev (it gets too many patch failures).
    >
    > Most of the differences were conflicts moving from tree to tree as some
    > of the trees are now merged into Linus' tree. Most have been inflicted
    > on the driver-core and usb trees. I have not notified these separately.
    >
    > Because of the moving of conflicts around it is difficult to tell when
    > they are going away (though I assume some are).
    >
    > The usb.current tree lost its conflict against Linus' tree.
    >
    > The usb tree gained a conflict against Linus' tree.
    >
    > The cpus4096 tree gained a conflict against Linus' tree.
    >
    > The pci tree lost one of its build fix patches.
    >
    > The i2c tree lost a conflict against Linus' tree.
    >
    > The ide tree gained a lot of conflicts against Linus' tree because part
    > of it was merged into Linus' tree but the remaining pat modified many of
    > the same files further.
    >
    > The acpi tree gained a conflict against Linus' tree.
    >
    > The net tree gained a conflict against each of Linus' tree and the
    > powerpc tree.
    >
    > The sparc tree gained conflicts against Linus' tree and the ide and
    > sparc-current trees.
    >
    > The rr tree gained conflict against the net tree.
    >
    > The semaphore tree gained a conflict against the sparc tree.
    >
    > The generic-ipi tree gained a conflict against the powerpc tree.
    >
    > The ttydev series had many patches fail to apply, so it was dropped for
    > today.
    >
    > I have also applied the following patches for known problems:
    >
    > sparc64: sysdev API change fallout
    >
    > Patches no longer necessary:
    >
    > s390: fix compile error due to smp_call_function
    > powerpc: mman.h export fixups
    > powerpc/stacktrace: EXPORT SYMBOL_GPL needs module.h
    >
    > This tree fails to build for ARCH=sparc (i.e. 32bit) with a 64bit gcc
    > v3.4.5 - it tries to use the 64bit header files. This may be an artifact
    > of one of my merge fixups, but I don't actually think so.


    I tried next-20080716 tree and got a boot problem with it.
    It seems that udev creates device files of disks differently from the
    older version, and the system couldn't mount it.

    On the older system, it's like
    /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS0VTJ1DP401567-part6
    and now it's like
    /dev/disk/by-id/scsi-1ATA_SAMSUNG_HD160JJS0VTJ1DP401567-part6

    I'm not sure whether the string above is 100% correct since I went
    back to home now, but at least, "SATA" was replaced with "1ATA" or
    so.

    Just to let you know... Sorry, now no time to check further.
    I'll check again tomorrow if needed. The config is attached below.


    thanks,

    Takashi
    ---
    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.26
    # Wed Jul 16 18:03:55 2008
    #
    CONFIG_64BIT=y
    # CONFIG_X86_32 is not set
    CONFIG_X86_64=y
    CONFIG_X86=y
    CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
    # CONFIG_GENERIC_LOCKBREAK is not set
    CONFIG_GENERIC_TIME=y
    CONFIG_GENERIC_CMOS_UPDATE=y
    CONFIG_CLOCKSOURCE_WATCHDOG=y
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_HAVE_LATENCYTOP_SUPPORT=y
    CONFIG_FAST_CMPXCHG_LOCAL=y
    CONFIG_MMU=y
    CONFIG_ZONE_DMA=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    CONFIG_GENERIC_BUG=y
    CONFIG_GENERIC_HWEIGHT=y
    # CONFIG_GENERIC_GPIO is not set
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_RWSEM_GENERIC_SPINLOCK=y
    # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
    # CONFIG_ARCH_HAS_ILOG2_U32 is not set
    # CONFIG_ARCH_HAS_ILOG2_U64 is not set
    CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_GENERIC_TIME_VSYSCALL=y
    CONFIG_ARCH_HAS_CPU_RELAX=y
    CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
    CONFIG_HAVE_SETUP_PER_CPU_AREA=y
    CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
    CONFIG_ARCH_HIBERNATION_POSSIBLE=y
    CONFIG_ARCH_SUSPEND_POSSIBLE=y
    CONFIG_ZONE_DMA32=y
    CONFIG_ARCH_POPULATES_NODE_MAP=y
    CONFIG_AUDIT_ARCH=y
    CONFIG_ARCH_SUPPORTS_AOUT=y
    CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_GENERIC_PENDING_IRQ=y
    CONFIG_X86_SMP=y
    CONFIG_X86_64_SMP=y
    CONFIG_X86_HT=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_X86_TRAMPOLINE=y
    # CONFIG_KTIME_SCALAR is not set
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

    #
    # General setup
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_LOCALVERSION="-next"
    # CONFIG_LOCALVERSION_AUTO is not set
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_BSD_PROCESS_ACCT_V3=y
    CONFIG_TASKSTATS=y
    CONFIG_TASK_DELAY_ACCT=y
    CONFIG_TASK_XACCT=y
    CONFIG_TASK_IO_ACCOUNTING=y
    CONFIG_AUDIT=y
    CONFIG_AUDITSYSCALL=y
    CONFIG_AUDIT_TREE=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_LOG_BUF_SHIFT=18
    # CONFIG_CGROUPS is not set
    CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
    # CONFIG_GROUP_SCHED is not set
    # CONFIG_SYSFS_DEPRECATED_V2 is not set
    CONFIG_RELAY=y
    CONFIG_NAMESPACES=y
    CONFIG_UTS_NS=y
    CONFIG_IPC_NS=y
    # CONFIG_USER_NS is not set
    # CONFIG_PID_NS is not set
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_CC_OPTIMIZE_FOR_SIZE=y
    CONFIG_SYSCTL=y
    # CONFIG_EMBEDDED is not set
    CONFIG_UID16=y
    CONFIG_SYSCTL_SYSCALL=y
    CONFIG_SYSCTL_SYSCALL_CHECK=y
    CONFIG_KALLSYMS=y
    CONFIG_KALLSYMS_ALL=y
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_PCSPKR_PLATFORM=y
    CONFIG_COMPAT_BRK=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_ANON_INODES=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_TIMERFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_SLUB_DEBUG=y
    # CONFIG_SLAB is not set
    CONFIG_SLUB=y
    # CONFIG_SLOB is not set
    CONFIG_PROFILING=y
    # CONFIG_MARKERS is not set
    CONFIG_OPROFILE=m
    CONFIG_HAVE_OPROFILE=y
    CONFIG_KPROBES=y
    CONFIG_KRETPROBES=y
    CONFIG_HAVE_KPROBES=y
    CONFIG_HAVE_KRETPROBES=y
    # CONFIG_HAVE_DMA_ATTRS is not set
    CONFIG_USE_GENERIC_SMP_HELPERS=y
    CONFIG_PROC_PAGE_MONITOR=y
    CONFIG_SLABINFO=y
    CONFIG_RT_MUTEXES=y
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    # CONFIG_MODULE_FORCE_LOAD is not set
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_MODVERSIONS=y
    CONFIG_MODULE_SRCVERSION_ALL=y
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y
    CONFIG_BLOCK=y
    CONFIG_BLK_DEV_IO_TRACE=y
    CONFIG_BLK_DEV_BSG=y
    CONFIG_BLK_DEV_INTEGRITY=y
    CONFIG_BLOCK_COMPAT=y

    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_DEFAULT_AS is not set
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"
    CONFIG_PREEMPT_NOTIFIERS=y
    CONFIG_CLASSIC_RCU=y

    #
    # Processor type and features
    #
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ=y
    CONFIG_HIGH_RES_TIMERS=y
    CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
    CONFIG_SMP=y
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_RDC321X is not set
    # CONFIG_X86_VSMP is not set
    CONFIG_PARAVIRT_GUEST=y
    CONFIG_KVM_CLOCK=y
    CONFIG_KVM_GUEST=y
    CONFIG_PARAVIRT=y
    CONFIG_PARAVIRT_CLOCK=y
    # CONFIG_PARAVIRT_DEBUG is not set
    CONFIG_MEMTEST=y
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MGEODEGX1 is not set
    # CONFIG_MGEODE_LX is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_MVIAC7 is not set
    # CONFIG_MPSC is not set
    # CONFIG_MCORE2 is not set
    CONFIG_GENERIC_CPU=y
    CONFIG_X86_CPU=y
    CONFIG_X86_L1_CACHE_BYTES=128
    CONFIG_X86_INTERNODE_CACHE_BYTES=128
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_CMPXCHG64=y
    CONFIG_X86_CMOV=y
    CONFIG_X86_MINIMUM_CPU_FAMILY=64
    CONFIG_X86_DEBUGCTLMSR=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_DMI=y
    CONFIG_GART_IOMMU=y
    CONFIG_CALGARY_IOMMU=y
    CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
    CONFIG_AMD_IOMMU=y
    CONFIG_SWIOTLB=y
    CONFIG_IOMMU_HELPER=y
    # CONFIG_MAXSMP is not set
    CONFIG_NR_CPUS=128
    CONFIG_SCHED_SMT=y
    CONFIG_SCHED_MC=y
    # CONFIG_PREEMPT_NONE is not set
    CONFIG_PREEMPT_VOLUNTARY=y
    # CONFIG_PREEMPT is not set
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_INTEL=y
    CONFIG_X86_MCE_AMD=y
    CONFIG_I8K=m
    CONFIG_MICROCODE=m
    CONFIG_MICROCODE_OLD_INTERFACE=y
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m
    CONFIG_NUMA=y
    CONFIG_K8_NUMA=y
    CONFIG_X86_64_ACPI_NUMA=y
    CONFIG_NODES_SPAN_OTHER_NODES=y
    CONFIG_NUMA_EMU=y
    CONFIG_NODES_SHIFT=6
    CONFIG_ARCH_SPARSEMEM_DEFAULT=y
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_ILLEGAL_POINTER_VALUE=0xffffc10000000000
    CONFIG_SELECT_MEMORY_MODEL=y
    # CONFIG_FLATMEM_MANUAL is not set
    # CONFIG_DISCONTIGMEM_MANUAL is not set
    CONFIG_SPARSEMEM_MANUAL=y
    CONFIG_SPARSEMEM=y
    CONFIG_NEED_MULTIPLE_NODES=y
    CONFIG_HAVE_MEMORY_PRESENT=y
    # CONFIG_SPARSEMEM_STATIC is not set
    CONFIG_SPARSEMEM_EXTREME=y
    CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
    CONFIG_SPARSEMEM_VMEMMAP=y

    #
    # Memory hotplug is currently incompatible with Software Suspend
    #
    CONFIG_PAGEFLAGS_EXTENDED=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_MIGRATION=y
    CONFIG_RESOURCES_64BIT=y
    CONFIG_ZONE_DMA_FLAG=1
    CONFIG_BOUNCE=y
    CONFIG_VIRT_TO_BUS=y
    CONFIG_MTRR=y
    CONFIG_MTRR_SANITIZER=y
    CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
    CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
    CONFIG_X86_PAT=y
    CONFIG_EFI=y
    CONFIG_SECCOMP=y
    # CONFIG_CC_STACKPROTECTOR is not set
    # CONFIG_HZ_100 is not set
    CONFIG_HZ_250=y
    # CONFIG_HZ_300 is not set
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=250
    CONFIG_SCHED_HRTICK=y
    CONFIG_KEXEC=y
    CONFIG_CRASH_DUMP=y
    CONFIG_PHYSICAL_START=0x200000
    CONFIG_RELOCATABLE=y
    CONFIG_PHYSICAL_ALIGN=0x200000
    CONFIG_HOTPLUG_CPU=y
    CONFIG_COMPAT_VDSO=y
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
    CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

    #
    # Power management options
    #
    CONFIG_ARCH_HIBERNATION_HEADER=y
    CONFIG_PM=y
    # CONFIG_PM_DEBUG is not set
    CONFIG_PM_SLEEP_SMP=y
    CONFIG_PM_SLEEP=y
    CONFIG_SUSPEND=y
    CONFIG_SUSPEND_FREEZER=y
    CONFIG_HIBERNATION=y
    CONFIG_PM_STD_PARTITION=""
    CONFIG_ACPI=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_PROCFS=y
    CONFIG_ACPI_PROCFS_POWER=y
    CONFIG_ACPI_SYSFS_POWER=y
    CONFIG_ACPI_PROC_EVENT=y
    CONFIG_ACPI_AC=m
    CONFIG_ACPI_BATTERY=m
    CONFIG_ACPI_BUTTON=m
    CONFIG_ACPI_VIDEO=m
    CONFIG_ACPI_FAN=m
    CONFIG_ACPI_DOCK=m
    CONFIG_ACPI_BAY=m
    CONFIG_ACPI_PROCESSOR=m
    CONFIG_ACPI_HOTPLUG_CPU=y
    CONFIG_ACPI_THERMAL=m
    CONFIG_ACPI_NUMA=y
    CONFIG_ACPI_WMI=m
    # CONFIG_ACPI_ASUS is not set
    CONFIG_ACPI_TOSHIBA=m
    CONFIG_ACPI_CUSTOM_DSDT_FILE=""
    # CONFIG_ACPI_CUSTOM_DSDT is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    CONFIG_ACPI_DEBUG=y
    # CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
    CONFIG_ACPI_EC=y
    # CONFIG_ACPI_PCI_SLOT is not set
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=m
    CONFIG_ACPI_SBS=m

    #
    # CPU Frequency scaling
    #
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=y
    # CONFIG_CPU_FREQ_DEBUG is not set
    CONFIG_CPU_FREQ_STAT=m
    CONFIG_CPU_FREQ_STAT_DETAILS=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=m
    CONFIG_CPU_FREQ_GOV_ONDEMAND=y
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

    #
    # CPUFreq processor drivers
    #
    CONFIG_X86_ACPI_CPUFREQ=m
    CONFIG_X86_POWERNOW_K8=m
    CONFIG_X86_POWERNOW_K8_ACPI=y
    # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
    # CONFIG_X86_P4_CLOCKMOD is not set

    #
    # shared options
    #
    # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
    # CONFIG_X86_SPEEDSTEP_LIB is not set
    CONFIG_CPU_IDLE=y
    CONFIG_CPU_IDLE_GOV_LADDER=y
    CONFIG_CPU_IDLE_GOV_MENU=y

    #
    # Bus options (PCI etc.)
    #
    CONFIG_PCI=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCI_DOMAINS=y
    # CONFIG_DMAR is not set
    CONFIG_PCIEPORTBUS=y
    CONFIG_HOTPLUG_PCI_PCIE=m
    CONFIG_PCIEAER=y
    # CONFIG_PCIEASPM is not set
    CONFIG_ARCH_SUPPORTS_MSI=y
    CONFIG_PCI_MSI=y
    CONFIG_PCI_LEGACY=y
    # CONFIG_PCI_DEBUG is not set
    CONFIG_HT_IRQ=y
    CONFIG_ISA_DMA_API=y
    CONFIG_K8_NB=y
    CONFIG_PCCARD=m
    # CONFIG_PCMCIA_DEBUG is not set
    CONFIG_PCMCIA=m
    CONFIG_PCMCIA_LOAD_CIS=y
    CONFIG_PCMCIA_IOCTL=y
    CONFIG_CARDBUS=y

    #
    # PC-card bridges
    #
    CONFIG_YENTA=m
    CONFIG_YENTA_O2=y
    CONFIG_YENTA_RICOH=y
    CONFIG_YENTA_TI=y
    CONFIG_YENTA_ENE_TUNE=y
    CONFIG_YENTA_TOSHIBA=y
    CONFIG_PD6729=m
    CONFIG_I82092=m
    CONFIG_PCCARD_NONSTATIC=m
    CONFIG_HOTPLUG_PCI=m
    CONFIG_HOTPLUG_PCI_FAKE=m
    CONFIG_HOTPLUG_PCI_ACPI=m
    CONFIG_HOTPLUG_PCI_ACPI_IBM=m
    CONFIG_HOTPLUG_PCI_CPCI=y
    CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
    CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
    CONFIG_HOTPLUG_PCI_SHPC=m

    #
    # Executable file formats / Emulations
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_COMPAT_BINFMT_ELF=y
    CONFIG_BINFMT_MISC=m
    CONFIG_IA32_EMULATION=y
    CONFIG_IA32_AOUT=y
    CONFIG_COMPAT=y
    CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
    CONFIG_SYSVIPC_COMPAT=y

    #
    # Networking
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=m
    CONFIG_PACKET_MMAP=y
    CONFIG_UNIX=y
    CONFIG_XFRM=y
    CONFIG_XFRM_USER=m
    # CONFIG_XFRM_SUB_POLICY is not set
    CONFIG_XFRM_MIGRATE=y
    # CONFIG_XFRM_STATISTICS is not set
    CONFIG_NET_KEY=m
    CONFIG_NET_KEY_MIGRATE=y
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_ASK_IP_FIB_HASH=y
    # CONFIG_IP_FIB_TRIE is not set
    CONFIG_IP_FIB_HASH=y
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    CONFIG_IP_ROUTE_VERBOSE=y
    CONFIG_IP_PNP=y
    CONFIG_IP_PNP_DHCP=y
    CONFIG_IP_PNP_BOOTP=y
    CONFIG_IP_PNP_RARP=y
    CONFIG_NET_IPIP=m
    CONFIG_NET_IPGRE=m
    CONFIG_NET_IPGRE_BROADCAST=y
    CONFIG_IP_MROUTE=y
    CONFIG_IP_PIMSM_V1=y
    CONFIG_IP_PIMSM_V2=y
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m
    CONFIG_INET_XFRM_TUNNEL=m
    CONFIG_INET_TUNNEL=m
    CONFIG_INET_XFRM_MODE_TRANSPORT=m
    CONFIG_INET_XFRM_MODE_TUNNEL=m
    CONFIG_INET_XFRM_MODE_BEET=m
    CONFIG_INET_LRO=y
    CONFIG_INET_DIAG=m
    CONFIG_INET_TCP_DIAG=m
    CONFIG_TCP_CONG_ADVANCED=y
    CONFIG_TCP_CONG_BIC=m
    CONFIG_TCP_CONG_CUBIC=m
    CONFIG_TCP_CONG_WESTWOOD=m
    CONFIG_TCP_CONG_HTCP=m
    CONFIG_TCP_CONG_HSTCP=m
    CONFIG_TCP_CONG_HYBLA=m
    CONFIG_TCP_CONG_VEGAS=m
    CONFIG_TCP_CONG_SCALABLE=m
    CONFIG_TCP_CONG_LP=m
    CONFIG_TCP_CONG_VENO=m
    CONFIG_TCP_CONG_YEAH=m
    CONFIG_TCP_CONG_ILLINOIS=m
    # CONFIG_DEFAULT_BIC is not set
    # CONFIG_DEFAULT_CUBIC is not set
    # CONFIG_DEFAULT_HTCP is not set
    # CONFIG_DEFAULT_VEGAS is not set
    # CONFIG_DEFAULT_WESTWOOD is not set
    CONFIG_DEFAULT_RENO=y
    CONFIG_DEFAULT_TCP_CONG="reno"
    # CONFIG_TCP_MD5SIG is not set
    CONFIG_IP_VS=m
    # CONFIG_IP_VS_DEBUG is not set
    CONFIG_IP_VS_TAB_BITS=12

    #
    # IPVS transport protocol load balancing support
    #
    CONFIG_IP_VS_PROTO_TCP=y
    CONFIG_IP_VS_PROTO_UDP=y
    CONFIG_IP_VS_PROTO_ESP=y
    CONFIG_IP_VS_PROTO_AH=y

    #
    # IPVS scheduler
    #
    CONFIG_IP_VS_RR=m
    CONFIG_IP_VS_WRR=m
    CONFIG_IP_VS_LC=m
    CONFIG_IP_VS_WLC=m
    CONFIG_IP_VS_LBLC=m
    CONFIG_IP_VS_LBLCR=m
    CONFIG_IP_VS_DH=m
    CONFIG_IP_VS_SH=m
    CONFIG_IP_VS_SED=m
    CONFIG_IP_VS_NQ=m

    #
    # IPVS application helper
    #
    CONFIG_IP_VS_FTP=m
    CONFIG_IPV6=m
    CONFIG_IPV6_PRIVACY=y
    CONFIG_IPV6_ROUTER_PREF=y
    CONFIG_IPV6_ROUTE_INFO=y
    # CONFIG_IPV6_OPTIMISTIC_DAD is not set
    CONFIG_INET6_AH=m
    CONFIG_INET6_ESP=m
    CONFIG_INET6_IPCOMP=m
    CONFIG_IPV6_MIP6=m
    CONFIG_INET6_XFRM_TUNNEL=m
    CONFIG_INET6_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_TRANSPORT=m
    CONFIG_INET6_XFRM_MODE_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_BEET=m
    CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
    CONFIG_IPV6_SIT=m
    CONFIG_IPV6_NDISC_NODETYPE=y
    CONFIG_IPV6_TUNNEL=m
    CONFIG_IPV6_MULTIPLE_TABLES=y
    CONFIG_IPV6_SUBTREES=y
    # CONFIG_IPV6_MROUTE is not set
    # CONFIG_NETLABEL is not set
    CONFIG_NETWORK_SECMARK=y
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set
    CONFIG_NETFILTER_ADVANCED=y
    CONFIG_BRIDGE_NETFILTER=y

    #
    # Core Netfilter Configuration
    #
    CONFIG_NETFILTER_NETLINK=m
    CONFIG_NETFILTER_NETLINK_QUEUE=m
    CONFIG_NETFILTER_NETLINK_LOG=m
    CONFIG_NF_CONNTRACK=m
    CONFIG_NF_CT_ACCT=y
    CONFIG_NF_CONNTRACK_MARK=y
    CONFIG_NF_CONNTRACK_SECMARK=y
    CONFIG_NF_CONNTRACK_EVENTS=y
    CONFIG_NF_CT_PROTO_DCCP=m
    CONFIG_NF_CT_PROTO_GRE=m
    CONFIG_NF_CT_PROTO_SCTP=m
    CONFIG_NF_CT_PROTO_UDPLITE=m
    CONFIG_NF_CONNTRACK_AMANDA=m
    CONFIG_NF_CONNTRACK_FTP=m
    CONFIG_NF_CONNTRACK_H323=m
    CONFIG_NF_CONNTRACK_IRC=m
    CONFIG_NF_CONNTRACK_NETBIOS_NS=m
    CONFIG_NF_CONNTRACK_PPTP=m
    CONFIG_NF_CONNTRACK_SANE=m
    CONFIG_NF_CONNTRACK_SIP=m
    CONFIG_NF_CONNTRACK_TFTP=m
    CONFIG_NF_CT_NETLINK=m
    CONFIG_NETFILTER_XTABLES=m
    CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
    CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
    CONFIG_NETFILTER_XT_TARGET_DSCP=m
    CONFIG_NETFILTER_XT_TARGET_MARK=m
    CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
    CONFIG_NETFILTER_XT_TARGET_NFLOG=m
    CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
    CONFIG_NETFILTER_XT_TARGET_RATEEST=m
    CONFIG_NETFILTER_XT_TARGET_TRACE=m
    CONFIG_NETFILTER_XT_TARGET_SECMARK=m
    CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
    CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
    CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
    CONFIG_NETFILTER_XT_MATCH_COMMENT=m
    CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
    CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
    CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
    CONFIG_NETFILTER_XT_MATCH_DCCP=m
    CONFIG_NETFILTER_XT_MATCH_DSCP=m
    CONFIG_NETFILTER_XT_MATCH_ESP=m
    CONFIG_NETFILTER_XT_MATCH_HELPER=m
    CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
    CONFIG_NETFILTER_XT_MATCH_LENGTH=m
    CONFIG_NETFILTER_XT_MATCH_LIMIT=m
    CONFIG_NETFILTER_XT_MATCH_MAC=m
    CONFIG_NETFILTER_XT_MATCH_MARK=m
    CONFIG_NETFILTER_XT_MATCH_OWNER=m
    CONFIG_NETFILTER_XT_MATCH_POLICY=m
    CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
    CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
    CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
    CONFIG_NETFILTER_XT_MATCH_QUOTA=m
    CONFIG_NETFILTER_XT_MATCH_RATEEST=m
    CONFIG_NETFILTER_XT_MATCH_REALM=m
    CONFIG_NETFILTER_XT_MATCH_SCTP=m
    CONFIG_NETFILTER_XT_MATCH_STATE=m
    CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
    CONFIG_NETFILTER_XT_MATCH_STRING=m
    CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
    CONFIG_NETFILTER_XT_MATCH_TIME=m
    CONFIG_NETFILTER_XT_MATCH_U32=m
    CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

    #
    # IP: Netfilter Configuration
    #
    CONFIG_NF_CONNTRACK_IPV4=m
    # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
    CONFIG_IP_NF_QUEUE=m
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_RECENT=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_AH=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_MATCH_ADDRTYPE=m
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_NF_NAT=m
    CONFIG_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    CONFIG_NF_NAT_SNMP_BASIC=m
    CONFIG_NF_NAT_PROTO_DCCP=m
    CONFIG_NF_NAT_PROTO_GRE=m
    CONFIG_NF_NAT_PROTO_UDPLITE=m
    CONFIG_NF_NAT_PROTO_SCTP=m
    CONFIG_NF_NAT_FTP=m
    CONFIG_NF_NAT_IRC=m
    CONFIG_NF_NAT_TFTP=m
    CONFIG_NF_NAT_AMANDA=m
    CONFIG_NF_NAT_PPTP=m
    CONFIG_NF_NAT_H323=m
    CONFIG_NF_NAT_SIP=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_TTL=m
    CONFIG_IP_NF_TARGET_CLUSTERIP=m
    CONFIG_IP_NF_RAW=m
    CONFIG_IP_NF_SECURITY=m
    CONFIG_IP_NF_ARPTABLES=m
    CONFIG_IP_NF_ARPFILTER=m
    CONFIG_IP_NF_ARP_MANGLE=m

    #
    # IPv6: Netfilter Configuration
    #
    CONFIG_NF_CONNTRACK_IPV6=m
    CONFIG_IP6_NF_QUEUE=m
    CONFIG_IP6_NF_IPTABLES=m
    CONFIG_IP6_NF_MATCH_RT=m
    CONFIG_IP6_NF_MATCH_OPTS=m
    CONFIG_IP6_NF_MATCH_FRAG=m
    CONFIG_IP6_NF_MATCH_HL=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=m
    CONFIG_IP6_NF_MATCH_AH=m
    CONFIG_IP6_NF_MATCH_MH=m
    CONFIG_IP6_NF_MATCH_EUI64=m
    CONFIG_IP6_NF_FILTER=m
    CONFIG_IP6_NF_TARGET_LOG=m
    CONFIG_IP6_NF_TARGET_REJECT=m
    CONFIG_IP6_NF_MANGLE=m
    CONFIG_IP6_NF_TARGET_HL=m
    CONFIG_IP6_NF_RAW=m
    CONFIG_IP6_NF_SECURITY=m

    #
    # DECnet: Netfilter Configuration
    #
    # CONFIG_DECNET_NF_GRABULATOR is not set

    #
    # Bridge: Netfilter Configuration
    #
    CONFIG_BRIDGE_NF_EBTABLES=m
    CONFIG_BRIDGE_EBT_BROUTE=m
    CONFIG_BRIDGE_EBT_T_FILTER=m
    CONFIG_BRIDGE_EBT_T_NAT=m
    CONFIG_BRIDGE_EBT_802_3=m
    CONFIG_BRIDGE_EBT_AMONG=m
    CONFIG_BRIDGE_EBT_ARP=m
    CONFIG_BRIDGE_EBT_IP=m
    CONFIG_BRIDGE_EBT_IP6=m
    CONFIG_BRIDGE_EBT_LIMIT=m
    CONFIG_BRIDGE_EBT_MARK=m
    CONFIG_BRIDGE_EBT_PKTTYPE=m
    CONFIG_BRIDGE_EBT_STP=m
    CONFIG_BRIDGE_EBT_VLAN=m
    CONFIG_BRIDGE_EBT_ARPREPLY=m
    CONFIG_BRIDGE_EBT_DNAT=m
    CONFIG_BRIDGE_EBT_MARK_T=m
    CONFIG_BRIDGE_EBT_REDIRECT=m
    CONFIG_BRIDGE_EBT_SNAT=m
    CONFIG_BRIDGE_EBT_LOG=m
    CONFIG_BRIDGE_EBT_ULOG=m
    CONFIG_BRIDGE_EBT_NFLOG=m
    CONFIG_IP_DCCP=m
    CONFIG_INET_DCCP_DIAG=m
    CONFIG_IP_DCCP_ACKVEC=y

    #
    # DCCP CCIDs Configuration (EXPERIMENTAL)
    #
    CONFIG_IP_DCCP_CCID2=m
    # CONFIG_IP_DCCP_CCID2_DEBUG is not set
    CONFIG_IP_DCCP_CCID3=m
    # CONFIG_IP_DCCP_CCID3_DEBUG is not set
    CONFIG_IP_DCCP_CCID3_RTO=100
    CONFIG_IP_DCCP_TFRC_LIB=m

    #
    # DCCP Kernel Hacking
    #
    # CONFIG_IP_DCCP_DEBUG is not set
    # CONFIG_NET_DCCPPROBE is not set
    CONFIG_IP_SCTP=m
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    # CONFIG_SCTP_HMAC_SHA1 is not set
    CONFIG_SCTP_HMAC_MD5=y
    # CONFIG_TIPC is not set
    CONFIG_ATM=m
    CONFIG_ATM_CLIP=m
    # CONFIG_ATM_CLIP_NO_ICMP is not set
    CONFIG_ATM_LANE=m
    CONFIG_ATM_MPOA=m
    CONFIG_ATM_BR2684=m
    # CONFIG_ATM_BR2684_IPFILTER is not set
    CONFIG_STP=m
    CONFIG_GARP=m
    CONFIG_BRIDGE=m
    CONFIG_VLAN_8021Q=m
    CONFIG_VLAN_8021Q_GVRP=y
    CONFIG_DECNET=m
    # CONFIG_DECNET_ROUTER is not set
    CONFIG_LLC=y
    CONFIG_LLC2=m
    CONFIG_IPX=m
    CONFIG_IPX_INTERN=y
    CONFIG_ATALK=m
    CONFIG_DEV_APPLETALK=m
    CONFIG_IPDDP=m
    CONFIG_IPDDP_ENCAP=y
    CONFIG_IPDDP_DECAP=y
    CONFIG_X25=m
    CONFIG_LAPB=m
    CONFIG_ECONET=m
    # CONFIG_ECONET_AUNUDP is not set
    # CONFIG_ECONET_NATIVE is not set
    CONFIG_WAN_ROUTER=m
    CONFIG_NET_SCHED=y

    #
    # Queueing/Scheduling
    #
    CONFIG_NET_SCH_CBQ=m
    CONFIG_NET_SCH_HTB=m
    CONFIG_NET_SCH_HFSC=m
    CONFIG_NET_SCH_ATM=m
    CONFIG_NET_SCH_PRIO=m
    CONFIG_NET_SCH_RED=m
    CONFIG_NET_SCH_SFQ=m
    CONFIG_NET_SCH_TEQL=m
    CONFIG_NET_SCH_TBF=m
    CONFIG_NET_SCH_GRED=m
    CONFIG_NET_SCH_DSMARK=m
    CONFIG_NET_SCH_NETEM=m
    CONFIG_NET_SCH_INGRESS=m

    #
    # Classification
    #
    CONFIG_NET_CLS=y
    CONFIG_NET_CLS_BASIC=m
    CONFIG_NET_CLS_TCINDEX=m
    CONFIG_NET_CLS_ROUTE4=m
    CONFIG_NET_CLS_ROUTE=y
    CONFIG_NET_CLS_FW=m
    CONFIG_NET_CLS_U32=m
    CONFIG_CLS_U32_PERF=y
    CONFIG_CLS_U32_MARK=y
    CONFIG_NET_CLS_RSVP=m
    CONFIG_NET_CLS_RSVP6=m
    CONFIG_NET_CLS_FLOW=m
    CONFIG_NET_EMATCH=y
    CONFIG_NET_EMATCH_STACK=32
    CONFIG_NET_EMATCH_CMP=m
    CONFIG_NET_EMATCH_NBYTE=m
    CONFIG_NET_EMATCH_U32=m
    CONFIG_NET_EMATCH_META=m
    CONFIG_NET_EMATCH_TEXT=m
    CONFIG_NET_CLS_ACT=y
    CONFIG_NET_ACT_POLICE=m
    CONFIG_NET_ACT_GACT=m
    CONFIG_GACT_PROB=y
    CONFIG_NET_ACT_MIRRED=m
    CONFIG_NET_ACT_IPT=m
    CONFIG_NET_ACT_NAT=m
    CONFIG_NET_ACT_PEDIT=m
    CONFIG_NET_ACT_SIMP=m
    # CONFIG_NET_CLS_IND is not set
    CONFIG_NET_SCH_FIFO=y

    #
    # Network testing
    #
    CONFIG_NET_PKTGEN=m
    CONFIG_NET_TCPPROBE=m
    CONFIG_HAMRADIO=y

    #
    # Packet Radio protocols
    #
    CONFIG_AX25=m
    CONFIG_AX25_DAMA_SLAVE=y
    CONFIG_NETROM=m
    CONFIG_ROSE=m

    #
    # AX.25 network device drivers
    #
    CONFIG_MKISS=m
    CONFIG_6PACK=m
    CONFIG_BPQETHER=m
    CONFIG_BAYCOM_SER_FDX=m
    CONFIG_BAYCOM_SER_HDX=m
    CONFIG_BAYCOM_PAR=m
    CONFIG_YAM=m
    CONFIG_CAN=m
    CONFIG_CAN_RAW=m
    CONFIG_CAN_BCM=m

    #
    # CAN Device Drivers
    #
    CONFIG_CAN_VCAN=m
    # CONFIG_CAN_DEBUG_DEVICES is not set
    CONFIG_IRDA=m

    #
    # IrDA protocols
    #
    CONFIG_IRLAN=m
    CONFIG_IRNET=m
    CONFIG_IRCOMM=m
    CONFIG_IRDA_ULTRA=y

    #
    # IrDA options
    #
    CONFIG_IRDA_CACHE_LAST_LSAP=y
    # CONFIG_IRDA_FAST_RR is not set
    # CONFIG_IRDA_DEBUG is not set

    #
    # Infrared-port device drivers
    #

    #
    # SIR device drivers
    #
    CONFIG_IRTTY_SIR=m

    #
    # Dongle support
    #
    CONFIG_DONGLE=y
    CONFIG_ESI_DONGLE=m
    CONFIG_ACTISYS_DONGLE=m
    CONFIG_TEKRAM_DONGLE=m
    CONFIG_TOIM3232_DONGLE=m
    CONFIG_LITELINK_DONGLE=m
    CONFIG_MA600_DONGLE=m
    CONFIG_GIRBIL_DONGLE=m
    CONFIG_MCP2120_DONGLE=m
    CONFIG_OLD_BELKIN_DONGLE=m
    CONFIG_ACT200L_DONGLE=m
    CONFIG_KINGSUN_DONGLE=m
    CONFIG_KSDAZZLE_DONGLE=m
    CONFIG_KS959_DONGLE=m

    #
    # FIR device drivers
    #
    CONFIG_USB_IRDA=m
    CONFIG_SIGMATEL_FIR=m
    CONFIG_NSC_FIR=m
    CONFIG_WINBOND_FIR=m
    CONFIG_SMC_IRCC_FIR=m
    CONFIG_ALI_FIR=m
    CONFIG_VLSI_FIR=m
    CONFIG_VIA_FIR=m
    CONFIG_MCS_FIR=m
    CONFIG_BT=m
    CONFIG_BT_L2CAP=m
    CONFIG_BT_SCO=m
    CONFIG_BT_RFCOMM=m
    CONFIG_BT_RFCOMM_TTY=y
    CONFIG_BT_BNEP=m
    CONFIG_BT_BNEP_MC_FILTER=y
    CONFIG_BT_BNEP_PROTO_FILTER=y
    CONFIG_BT_CMTP=m
    CONFIG_BT_HIDP=m

    #
    # Bluetooth device drivers
    #
    CONFIG_BT_HCIUSB=m
    CONFIG_BT_HCIUSB_SCO=y
    CONFIG_BT_HCIBTSDIO=m
    CONFIG_BT_HCIUART=m
    CONFIG_BT_HCIUART_H4=y
    CONFIG_BT_HCIUART_BCSP=y
    CONFIG_BT_HCIUART_LL=y
    CONFIG_BT_HCIBCM203X=m
    CONFIG_BT_HCIBPA10X=m
    CONFIG_BT_HCIBFUSB=m
    CONFIG_BT_HCIDTL1=m
    CONFIG_BT_HCIBT3C=m
    CONFIG_BT_HCIBLUECARD=m
    CONFIG_BT_HCIBTUART=m
    CONFIG_BT_HCIVHCI=m
    CONFIG_AF_RXRPC=m
    # CONFIG_AF_RXRPC_DEBUG is not set
    CONFIG_RXKAD=m
    CONFIG_FIB_RULES=y

    #
    # Wireless
    #
    CONFIG_CFG80211=m
    CONFIG_NL80211=y
    CONFIG_WIRELESS_EXT=y
    CONFIG_WIRELESS_EXT_SYSFS=y
    CONFIG_MAC80211=m
    CONFIG_MAC80211_QOS=y

    #
    # Rate control algorithm selection
    #
    CONFIG_MAC80211_RC_PID=y
    CONFIG_MAC80211_RC_DEFAULT_PID=y
    CONFIG_MAC80211_RC_DEFAULT="pid"
    CONFIG_MAC80211_MESH=y
    CONFIG_MAC80211_LEDS=y
    CONFIG_MAC80211_DEBUGFS=y
    # CONFIG_MAC80211_DEBUG_MENU is not set
    CONFIG_IEEE80211=m
    # CONFIG_IEEE80211_DEBUG is not set
    CONFIG_IEEE80211_CRYPT_WEP=m
    CONFIG_IEEE80211_CRYPT_CCMP=m
    CONFIG_IEEE80211_CRYPT_TKIP=m
    CONFIG_RFKILL=m
    CONFIG_RFKILL_INPUT=m
    CONFIG_RFKILL_LEDS=y
    CONFIG_NET_9P=m
    CONFIG_NET_9P_VIRTIO=m
    # CONFIG_NET_9P_DEBUG is not set

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    CONFIG_UEVENT_HELPER_PATH=""
    # CONFIG_STANDALONE is not set
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    CONFIG_FIRMWARE_IN_KERNEL=y
    CONFIG_EXTRA_FIRMWARE=""
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    # CONFIG_SYS_HYPERVISOR is not set
    CONFIG_CONNECTOR=y
    CONFIG_PROC_EVENTS=y
    CONFIG_MTD=m
    # CONFIG_MTD_DEBUG is not set
    CONFIG_MTD_CONCAT=m
    CONFIG_MTD_PARTITIONS=y
    CONFIG_MTD_REDBOOT_PARTS=m
    CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
    # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
    # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
    CONFIG_MTD_AR7_PARTS=m

    #
    # User Modules And Translation Layers
    #
    CONFIG_MTD_CHAR=m
    CONFIG_MTD_BLKDEVS=m
    CONFIG_MTD_BLOCK=m
    # CONFIG_MTD_BLOCK_RO is not set
    # CONFIG_FTL is not set
    # CONFIG_NFTL is not set
    # CONFIG_INFTL is not set
    CONFIG_RFD_FTL=m
    # CONFIG_SSFDC is not set
    CONFIG_MTD_OOPS=m

    #
    # RAM/ROM/Flash chip drivers
    #
    CONFIG_MTD_CFI=m
    CONFIG_MTD_JEDECPROBE=m
    CONFIG_MTD_GEN_PROBE=m
    CONFIG_MTD_CFI_ADV_OPTIONS=y
    CONFIG_MTD_CFI_NOSWAP=y
    # CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
    # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
    # CONFIG_MTD_CFI_GEOMETRY is not set
    CONFIG_MTD_MAP_BANK_WIDTH_1=y
    CONFIG_MTD_MAP_BANK_WIDTH_2=y
    CONFIG_MTD_MAP_BANK_WIDTH_4=y
    # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
    CONFIG_MTD_CFI_I1=y
    CONFIG_MTD_CFI_I2=y
    # CONFIG_MTD_CFI_I4 is not set
    # CONFIG_MTD_CFI_I8 is not set
    # CONFIG_MTD_OTP is not set
    CONFIG_MTD_CFI_INTELEXT=m
    CONFIG_MTD_CFI_AMDSTD=m
    CONFIG_MTD_CFI_STAA=m
    CONFIG_MTD_CFI_UTIL=m
    # CONFIG_MTD_RAM is not set
    # CONFIG_MTD_ROM is not set
    CONFIG_MTD_ABSENT=m

    #
    # Mapping drivers for chip access
    #
    CONFIG_MTD_COMPLEX_MAPPINGS=y
    CONFIG_MTD_PHYSMAP=m
    CONFIG_MTD_PHYSMAP_START=0x8000000
    CONFIG_MTD_PHYSMAP_LEN=0x4000000
    CONFIG_MTD_PHYSMAP_BANKWIDTH=2
    # CONFIG_MTD_SC520CDP is not set
    # CONFIG_MTD_NETSC520 is not set
    CONFIG_MTD_TS5500=m
    # CONFIG_MTD_SBC_GXX is not set
    CONFIG_MTD_AMD76XROM=m
    CONFIG_MTD_ICHXROM=m
    CONFIG_MTD_ESB2ROM=m
    CONFIG_MTD_CK804XROM=m
    CONFIG_MTD_SCB2_FLASH=m
    # CONFIG_MTD_NETtel is not set
    # CONFIG_MTD_DILNETPC is not set
    # CONFIG_MTD_L440GX is not set
    CONFIG_MTD_PCI=m
    CONFIG_MTD_INTEL_VR_NOR=m
    # CONFIG_MTD_PLATRAM is not set

    #
    # Self-contained MTD device drivers
    #
    CONFIG_MTD_PMC551=m
    CONFIG_MTD_PMC551_BUGFIX=y
    # CONFIG_MTD_PMC551_DEBUG is not set
    # CONFIG_MTD_DATAFLASH is not set
    # CONFIG_MTD_M25P80 is not set
    CONFIG_MTD_SLRAM=m
    CONFIG_MTD_PHRAM=m
    CONFIG_MTD_MTDRAM=m
    CONFIG_MTDRAM_TOTAL_SIZE=4096
    CONFIG_MTDRAM_ERASE_SIZE=128
    CONFIG_MTD_BLOCK2MTD=m

    #
    # Disk-On-Chip Device Drivers
    #
    CONFIG_MTD_DOC2000=m
    CONFIG_MTD_DOC2001=m
    CONFIG_MTD_DOC2001PLUS=m
    CONFIG_MTD_DOCPROBE=m
    CONFIG_MTD_DOCECC=m
    CONFIG_MTD_DOCPROBE_ADVANCED=y
    CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
    CONFIG_MTD_DOCPROBE_HIGH=y
    CONFIG_MTD_DOCPROBE_55AA=y
    CONFIG_MTD_NAND=m
    # CONFIG_MTD_NAND_VERIFY_WRITE is not set
    CONFIG_MTD_NAND_ECC_SMC=y
    # CONFIG_MTD_NAND_MUSEUM_IDS is not set
    CONFIG_MTD_NAND_IDS=m
    CONFIG_MTD_NAND_DISKONCHIP=m
    # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
    CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
    CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
    CONFIG_MTD_NAND_CAFE=m
    CONFIG_MTD_NAND_NANDSIM=m
    CONFIG_MTD_NAND_PLATFORM=m
    CONFIG_MTD_ALAUDA=m
    CONFIG_MTD_ONENAND=m
    # CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
    CONFIG_MTD_ONENAND_OTP=y
    CONFIG_MTD_ONENAND_2X_PROGRAM=y
    CONFIG_MTD_ONENAND_SIM=m

    #
    # UBI - Unsorted block images
    #
    CONFIG_MTD_UBI=m
    CONFIG_MTD_UBI_WL_THRESHOLD=4096
    CONFIG_MTD_UBI_BEB_RESERVE=1
    # CONFIG_MTD_UBI_GLUEBI is not set

    #
    # UBI debugging options
    #
    # CONFIG_MTD_UBI_DEBUG is not set
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_SERIAL=m
    CONFIG_PARPORT_PC_FIFO=y
    CONFIG_PARPORT_PC_SUPERIO=y
    CONFIG_PARPORT_PC_PCMCIA=m
    # CONFIG_PARPORT_GSC is not set
    CONFIG_PARPORT_AX88796=m
    CONFIG_PARPORT_1284=y
    CONFIG_PARPORT_NOT_PC=y
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    CONFIG_PNPACPI=y
    CONFIG_BLK_DEV=y
    CONFIG_BLK_DEV_FD=m
    CONFIG_PARIDE=m

    #
    # Parallel IDE high-level drivers
    #
    CONFIG_PARIDE_PD=m
    CONFIG_PARIDE_PCD=m
    CONFIG_PARIDE_PF=m
    CONFIG_PARIDE_PT=m
    CONFIG_PARIDE_PG=m

    #
    # Parallel IDE protocol modules
    #
    CONFIG_PARIDE_ATEN=m
    CONFIG_PARIDE_BPCK=m
    CONFIG_PARIDE_COMM=m
    CONFIG_PARIDE_DSTR=m
    CONFIG_PARIDE_FIT2=m
    CONFIG_PARIDE_FIT3=m
    CONFIG_PARIDE_EPAT=m
    CONFIG_PARIDE_EPATC8=y
    CONFIG_PARIDE_EPIA=m
    CONFIG_PARIDE_FRIQ=m
    CONFIG_PARIDE_FRPW=m
    CONFIG_PARIDE_KBIC=m
    CONFIG_PARIDE_KTTI=m
    CONFIG_PARIDE_ON20=m
    CONFIG_PARIDE_ON26=m
    CONFIG_BLK_CPQ_DA=m
    CONFIG_BLK_CPQ_CISS_DA=m
    CONFIG_CISS_SCSI_TAPE=y
    CONFIG_BLK_DEV_DAC960=m
    CONFIG_BLK_DEV_UMEM=m
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    CONFIG_BLK_DEV_NBD=m
    CONFIG_BLK_DEV_SX8=m
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=m
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=128000
    CONFIG_BLK_DEV_XIP=y
    CONFIG_CDROM_PKTCDVD=m
    CONFIG_CDROM_PKTCDVD_BUFFERS=8
    CONFIG_CDROM_PKTCDVD_WCACHE=y
    CONFIG_ATA_OVER_ETH=m
    CONFIG_VIRTIO_BLK=m
    # CONFIG_BLK_DEV_HD is not set
    CONFIG_MISC_DEVICES=y
    CONFIG_IBM_ASM=m
    CONFIG_PHANTOM=m
    CONFIG_EEPROM_93CX6=m
    # CONFIG_SGI_IOC4 is not set
    CONFIG_TIFM_CORE=m
    CONFIG_TIFM_7XX1=m
    CONFIG_ACER_WMI=m
    CONFIG_ASUS_LAPTOP=m
    CONFIG_FUJITSU_LAPTOP=m
    # CONFIG_FUJITSU_LAPTOP_DEBUG is not set
    CONFIG_MSI_LAPTOP=m
    CONFIG_COMPAL_LAPTOP=m
    CONFIG_SONY_LAPTOP=m
    CONFIG_SONYPI_COMPAT=y
    CONFIG_THINKPAD_ACPI=m
    # CONFIG_THINKPAD_ACPI_DEBUG is not set
    CONFIG_THINKPAD_ACPI_BAY=y
    CONFIG_THINKPAD_ACPI_VIDEO=y
    CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
    CONFIG_INTEL_MENLOW=m
    CONFIG_EEEPC_LAPTOP=m
    CONFIG_ENCLOSURE_SERVICES=m
    CONFIG_HP_ILO=m
    CONFIG_HAVE_IDE=y
    CONFIG_IDE=m
    CONFIG_BLK_DEV_IDE=m

    #
    # Please see Documentation/ide/ide.txt for help/info on IDE drives
    #
    CONFIG_IDE_TIMINGS=y
    CONFIG_IDE_ATAPI=y
    # CONFIG_BLK_DEV_IDE_SATA is not set
    CONFIG_BLK_DEV_IDEDISK=m
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECS=m
    CONFIG_BLK_DEV_DELKIN=m
    CONFIG_BLK_DEV_IDECD=m
    CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
    CONFIG_BLK_DEV_IDETAPE=m
    CONFIG_BLK_DEV_IDEFLOPPY=m
    CONFIG_BLK_DEV_IDESCSI=m
    CONFIG_BLK_DEV_IDEACPI=y
    # CONFIG_IDE_TASK_IOCTL is not set
    CONFIG_IDE_PROC_FS=y

    #
    # IDE chipset support/bugfixes
    #
    CONFIG_IDE_GENERIC=m
    CONFIG_BLK_DEV_PLATFORM=m
    CONFIG_BLK_DEV_CMD640=m
    CONFIG_BLK_DEV_CMD640_ENHANCED=y
    CONFIG_BLK_DEV_IDEPNP=m
    CONFIG_BLK_DEV_IDEDMA_SFF=y

    #
    # PCI IDE chipsets support
    #
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_BLK_DEV_OFFBOARD=y
    CONFIG_BLK_DEV_GENERIC=m
    # CONFIG_BLK_DEV_OPTI621 is not set
    CONFIG_BLK_DEV_RZ1000=m
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    CONFIG_BLK_DEV_AEC62XX=m
    CONFIG_BLK_DEV_ALI15X3=m
    CONFIG_BLK_DEV_AMD74XX=m
    CONFIG_BLK_DEV_ATIIXP=m
    CONFIG_BLK_DEV_CMD64X=m
    CONFIG_BLK_DEV_TRIFLEX=m
    CONFIG_BLK_DEV_CS5520=m
    CONFIG_BLK_DEV_CS5530=m
    CONFIG_BLK_DEV_HPT366=m
    CONFIG_BLK_DEV_JMICRON=m
    CONFIG_BLK_DEV_SC1200=m
    CONFIG_BLK_DEV_PIIX=m
    CONFIG_BLK_DEV_IT8213=m
    CONFIG_BLK_DEV_IT821X=m
    CONFIG_BLK_DEV_NS87415=m
    CONFIG_BLK_DEV_PDC202XX_OLD=m
    CONFIG_BLK_DEV_PDC202XX_NEW=m
    CONFIG_BLK_DEV_SVWKS=m
    CONFIG_BLK_DEV_SIIMAGE=m
    CONFIG_BLK_DEV_SIS5513=m
    CONFIG_BLK_DEV_SLC90E66=m
    # CONFIG_BLK_DEV_TRM290 is not set
    CONFIG_BLK_DEV_VIA82CXXX=m
    # CONFIG_BLK_DEV_TC86C001 is not set
    CONFIG_BLK_DEV_IDEDMA=y

    #
    # SCSI device support
    #
    CONFIG_RAID_ATTRS=m
    CONFIG_SCSI=m
    CONFIG_SCSI_DMA=y
    CONFIG_SCSI_TGT=m
    CONFIG_SCSI_NETLINK=y
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=m
    CONFIG_CHR_DEV_ST=m
    CONFIG_CHR_DEV_OSST=m
    CONFIG_BLK_DEV_SR=m
    # CONFIG_BLK_DEV_SR_VENDOR is not set
    CONFIG_CHR_DEV_SG=m
    CONFIG_CHR_DEV_SCH=m
    CONFIG_SCSI_ENCLOSURE=m

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    CONFIG_SCSI_MULTI_LUN=y
    CONFIG_SCSI_CONSTANTS=y
    CONFIG_SCSI_LOGGING=y
    # CONFIG_SCSI_SCAN_ASYNC is not set
    CONFIG_SCSI_WAIT_SCAN=m

    #
    # SCSI Transports
    #
    CONFIG_SCSI_SPI_ATTRS=m
    CONFIG_SCSI_FC_ATTRS=m
    CONFIG_SCSI_FC_TGT_ATTRS=y
    CONFIG_SCSI_ISCSI_ATTRS=m
    CONFIG_SCSI_SAS_ATTRS=m
    CONFIG_SCSI_SAS_LIBSAS=m
    CONFIG_SCSI_SAS_ATA=y
    CONFIG_SCSI_SAS_HOST_SMP=y
    CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
    CONFIG_SCSI_SRP_ATTRS=m
    CONFIG_SCSI_SRP_TGT_ATTRS=y
    CONFIG_SCSI_LOWLEVEL=y
    CONFIG_ISCSI_TCP=m
    CONFIG_BLK_DEV_3W_XXXX_RAID=m
    CONFIG_SCSI_3W_9XXX=m
    CONFIG_SCSI_ACARD=m
    CONFIG_SCSI_AACRAID=m
    CONFIG_SCSI_AIC7XXX=m
    CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
    CONFIG_AIC7XXX_RESET_DELAY_MS=5000
    # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
    CONFIG_AIC7XXX_DEBUG_MASK=0
    CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
    CONFIG_SCSI_AIC7XXX_OLD=m
    CONFIG_SCSI_AIC79XX=m
    CONFIG_AIC79XX_CMDS_PER_DEVICE=32
    CONFIG_AIC79XX_RESET_DELAY_MS=15000
    # CONFIG_AIC79XX_DEBUG_ENABLE is not set
    CONFIG_AIC79XX_DEBUG_MASK=0
    CONFIG_AIC79XX_REG_PRETTY_PRINT=y
    CONFIG_SCSI_AIC94XX=m
    CONFIG_AIC94XX_DEBUG=y
    CONFIG_SCSI_DPT_I2O=m
    CONFIG_SCSI_ADVANSYS=m
    CONFIG_SCSI_ARCMSR=m
    CONFIG_SCSI_ARCMSR_AER=y
    CONFIG_MEGARAID_NEWGEN=y
    CONFIG_MEGARAID_MM=m
    CONFIG_MEGARAID_MAILBOX=m
    CONFIG_MEGARAID_LEGACY=m
    CONFIG_MEGARAID_SAS=m
    CONFIG_SCSI_HPTIOP=m
    CONFIG_SCSI_BUSLOGIC=m
    CONFIG_SCSI_DMX3191D=m
    CONFIG_SCSI_EATA=m
    CONFIG_SCSI_EATA_TAGGED_QUEUE=y
    CONFIG_SCSI_EATA_LINKED_COMMANDS=y
    CONFIG_SCSI_EATA_MAX_TAGS=16
    CONFIG_SCSI_FUTURE_DOMAIN=m
    CONFIG_SCSI_GDTH=m
    CONFIG_SCSI_IPS=m
    CONFIG_SCSI_INITIO=m
    # CONFIG_SCSI_INIA100 is not set
    CONFIG_SCSI_PPA=m
    CONFIG_SCSI_IMM=m
    # CONFIG_SCSI_IZIP_EPP16 is not set
    # CONFIG_SCSI_IZIP_SLOW_CTR is not set
    CONFIG_SCSI_MVSAS=m
    CONFIG_SCSI_STEX=m
    CONFIG_SCSI_SYM53C8XX_2=m
    CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
    CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
    CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
    CONFIG_SCSI_SYM53C8XX_MMIO=y
    # CONFIG_SCSI_IPR is not set
    CONFIG_SCSI_QLOGIC_1280=m
    CONFIG_SCSI_QLA_FC=m
    CONFIG_SCSI_QLA_ISCSI=m
    CONFIG_SCSI_LPFC=m
    CONFIG_SCSI_DC395x=m
    CONFIG_SCSI_DC390T=m
    CONFIG_SCSI_DEBUG=m
    CONFIG_SCSI_SRP=m
    CONFIG_SCSI_LOWLEVEL_PCMCIA=y
    CONFIG_PCMCIA_FDOMAIN=m
    CONFIG_PCMCIA_QLOGIC=m
    CONFIG_PCMCIA_SYM53C500=m
    CONFIG_SCSI_DH=m
    CONFIG_SCSI_DH_RDAC=m
    CONFIG_SCSI_DH_HP_SW=m
    CONFIG_SCSI_DH_EMC=m
    CONFIG_ATA=m
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_ACPI=y
    CONFIG_SATA_PMP=y
    CONFIG_SATA_AHCI=m
    CONFIG_SATA_SIL24=m
    CONFIG_ATA_SFF=y
    CONFIG_SATA_SVW=m
    CONFIG_ATA_PIIX=m
    CONFIG_SATA_MV=m
    CONFIG_SATA_NV=m
    CONFIG_PDC_ADMA=m
    CONFIG_SATA_QSTOR=m
    CONFIG_SATA_PROMISE=m
    CONFIG_SATA_SX4=m
    CONFIG_SATA_SIL=m
    CONFIG_SATA_SIS=m
    CONFIG_SATA_ULI=m
    CONFIG_SATA_VIA=m
    CONFIG_SATA_VITESSE=m
    CONFIG_SATA_INIC162X=m
    CONFIG_PATA_ACPI=m
    CONFIG_PATA_ALI=m
    CONFIG_PATA_AMD=m
    CONFIG_PATA_ARTOP=m
    CONFIG_PATA_ATIIXP=m
    CONFIG_PATA_CMD640_PCI=m
    CONFIG_PATA_CMD64X=m
    CONFIG_PATA_CS5520=m
    CONFIG_PATA_CS5530=m
    CONFIG_PATA_CYPRESS=m
    CONFIG_PATA_EFAR=m
    CONFIG_ATA_GENERIC=m
    CONFIG_PATA_HPT366=m
    CONFIG_PATA_HPT37X=m
    CONFIG_PATA_HPT3X2N=m
    CONFIG_PATA_HPT3X3=m
    # CONFIG_PATA_HPT3X3_DMA is not set
    CONFIG_PATA_IT821X=m
    CONFIG_PATA_IT8213=m
    CONFIG_PATA_JMICRON=m
    CONFIG_PATA_TRIFLEX=m
    CONFIG_PATA_MARVELL=m
    CONFIG_PATA_MPIIX=m
    CONFIG_PATA_OLDPIIX=m
    CONFIG_PATA_NETCELL=m
    CONFIG_PATA_NINJA32=m
    CONFIG_PATA_NS87410=m
    CONFIG_PATA_NS87415=m
    CONFIG_PATA_OPTI=m
    CONFIG_PATA_OPTIDMA=m
    CONFIG_PATA_PCMCIA=m
    CONFIG_PATA_PDC_OLD=m
    CONFIG_PATA_RADISYS=m
    CONFIG_PATA_RZ1000=m
    CONFIG_PATA_SC1200=m
    CONFIG_PATA_SERVERWORKS=m
    CONFIG_PATA_PDC2027X=m
    CONFIG_PATA_SIL680=m
    CONFIG_PATA_SIS=m
    CONFIG_PATA_VIA=m
    CONFIG_PATA_WINBOND=m
    CONFIG_PATA_SCH=m
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=y
    CONFIG_MD_LINEAR=m
    CONFIG_MD_RAID0=m
    CONFIG_MD_RAID1=m
    CONFIG_MD_RAID10=m
    CONFIG_MD_RAID456=m
    CONFIG_MD_RAID5_RESHAPE=y
    CONFIG_MD_MULTIPATH=m
    CONFIG_MD_FAULTY=m
    CONFIG_BLK_DEV_DM=m
    # CONFIG_DM_DEBUG is not set
    CONFIG_DM_CRYPT=m
    CONFIG_DM_SNAPSHOT=m
    CONFIG_DM_MIRROR=m
    CONFIG_DM_ZERO=m
    CONFIG_DM_MULTIPATH=m
    CONFIG_DM_DELAY=m
    CONFIG_DM_UEVENT=y
    CONFIG_FUSION=y
    CONFIG_FUSION_SPI=m
    CONFIG_FUSION_FC=m
    CONFIG_FUSION_SAS=m
    CONFIG_FUSION_MAX_SGE=128
    CONFIG_FUSION_CTL=m
    CONFIG_FUSION_LAN=m
    # CONFIG_FUSION_LOGGING is not set

    #
    # IEEE 1394 (FireWire) support
    #

    #
    # Enable only one of the two stacks, unless you know what you are doing
    #
    # CONFIG_FIREWIRE is not set
    CONFIG_IEEE1394=m
    CONFIG_IEEE1394_OHCI1394=m
    CONFIG_IEEE1394_PCILYNX=m
    CONFIG_IEEE1394_SBP2=m
    # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
    CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
    CONFIG_IEEE1394_ETH1394=m
    CONFIG_IEEE1394_RAWIO=m
    CONFIG_IEEE1394_VIDEO1394=m
    CONFIG_IEEE1394_DV1394=m
    # CONFIG_IEEE1394_VERBOSEDEBUG is not set
    CONFIG_I2O=m
    CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
    CONFIG_I2O_EXT_ADAPTEC=y
    CONFIG_I2O_EXT_ADAPTEC_DMA64=y
    CONFIG_I2O_CONFIG=m
    CONFIG_I2O_CONFIG_OLD_IOCTL=y
    CONFIG_I2O_BUS=m
    CONFIG_I2O_BLOCK=m
    CONFIG_I2O_SCSI=m
    CONFIG_I2O_PROC=m
    # CONFIG_MACINTOSH_DRIVERS is not set
    CONFIG_NETDEVICES=y
    CONFIG_IFB=m
    CONFIG_DUMMY=m
    CONFIG_BONDING=m
    CONFIG_MACVLAN=m
    CONFIG_EQUALIZER=m
    CONFIG_TUN=m
    CONFIG_VETH=m
    # CONFIG_NET_SB1000 is not set
    CONFIG_ARCNET=m
    CONFIG_ARCNET_1201=m
    CONFIG_ARCNET_1051=m
    CONFIG_ARCNET_RAW=m
    CONFIG_ARCNET_CAP=m
    CONFIG_ARCNET_COM90xx=m
    CONFIG_ARCNET_COM90xxIO=m
    CONFIG_ARCNET_RIM_I=m
    # CONFIG_ARCNET_COM20020 is not set
    CONFIG_PHYLIB=m

    #
    # MII PHY device drivers
    #
    CONFIG_MARVELL_PHY=m
    CONFIG_DAVICOM_PHY=m
    CONFIG_QSEMI_PHY=m
    CONFIG_LXT_PHY=m
    CONFIG_CICADA_PHY=m
    CONFIG_VITESSE_PHY=m
    CONFIG_SMSC_PHY=m
    CONFIG_BROADCOM_PHY=m
    CONFIG_ICPLUS_PHY=m
    CONFIG_REALTEK_PHY=m
    CONFIG_MDIO_BITBANG=m
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=m
    CONFIG_HAPPYMEAL=m
    CONFIG_SUNGEM=m
    CONFIG_CASSINI=m
    CONFIG_NET_VENDOR_3COM=y
    CONFIG_VORTEX=m
    CONFIG_TYPHOON=m
    CONFIG_ENC28J60=m
    # CONFIG_ENC28J60_WRITEVERIFY is not set
    CONFIG_NET_TULIP=y
    CONFIG_DE2104X=m
    CONFIG_TULIP=m
    # CONFIG_TULIP_MWI is not set
    # CONFIG_TULIP_MMIO is not set
    CONFIG_TULIP_NAPI=y
    CONFIG_TULIP_NAPI_HW_MITIGATION=y
    CONFIG_DE4X5=m
    CONFIG_WINBOND_840=m
    CONFIG_DM9102=m
    CONFIG_ULI526X=m
    CONFIG_PCMCIA_XIRCOM=m
    CONFIG_HP100=m
    # CONFIG_IBM_NEW_EMAC_ZMII is not set
    # CONFIG_IBM_NEW_EMAC_RGMII is not set
    # CONFIG_IBM_NEW_EMAC_TAH is not set
    # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
    CONFIG_NET_PCI=y
    CONFIG_PCNET32=m
    CONFIG_AMD8111_ETH=m
    CONFIG_ADAPTEC_STARFIRE=m
    CONFIG_B44=m
    CONFIG_B44_PCI_AUTOSELECT=y
    CONFIG_B44_PCICORE_AUTOSELECT=y
    CONFIG_B44_PCI=y
    CONFIG_FORCEDETH=m
    CONFIG_FORCEDETH_NAPI=y
    CONFIG_EEPRO100=m
    CONFIG_E100=m
    CONFIG_FEALNX=m
    CONFIG_NATSEMI=m
    CONFIG_NE2K_PCI=m
    CONFIG_8139CP=m
    CONFIG_8139TOO=m
    # CONFIG_8139TOO_PIO is not set
    # CONFIG_8139TOO_TUNE_TWISTER is not set
    CONFIG_8139TOO_8129=y
    # CONFIG_8139_OLD_RX_RESET is not set
    CONFIG_R6040=m
    CONFIG_SIS900=m
    CONFIG_EPIC100=m
    CONFIG_SUNDANCE=m
    # CONFIG_SUNDANCE_MMIO is not set
    CONFIG_TLAN=m
    CONFIG_VIA_RHINE=m
    # CONFIG_VIA_RHINE_MMIO is not set
    CONFIG_SC92031=m
    # CONFIG_NET_POCKET is not set
    CONFIG_NETDEV_1000=y
    CONFIG_ACENIC=m
    # CONFIG_ACENIC_OMIT_TIGON_I is not set
    CONFIG_DL2K=m
    CONFIG_E1000=m
    CONFIG_E1000_NAPI=y
    # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
    CONFIG_E1000E=m
    CONFIG_IP1000=m
    CONFIG_IGB=m
    # CONFIG_IGB_LRO is not set
    CONFIG_NS83820=m
    CONFIG_HAMACHI=m
    CONFIG_YELLOWFIN=m
    CONFIG_R8169=m
    CONFIG_R8169_VLAN=y
    CONFIG_SIS190=m
    CONFIG_SKGE=m
    # CONFIG_SKGE_DEBUG is not set
    CONFIG_SKY2=m
    # CONFIG_SKY2_DEBUG is not set
    CONFIG_VIA_VELOCITY=m
    CONFIG_TIGON3=m
    CONFIG_BNX2=m
    CONFIG_QLA3XXX=m
    CONFIG_ATL1=m
    CONFIG_NETDEV_10000=y
    CONFIG_CHELSIO_T1=m
    CONFIG_CHELSIO_T1_1G=y
    CONFIG_CHELSIO_T3=m
    CONFIG_IXGBE=m
    CONFIG_IXGB=m
    CONFIG_S2IO=m
    CONFIG_MYRI10GE=m
    CONFIG_NETXEN_NIC=m
    CONFIG_NIU=m
    CONFIG_MLX4_CORE=m
    CONFIG_MLX4_DEBUG=y
    CONFIG_TEHUTI=m
    CONFIG_BNX2X=m
    CONFIG_SFC=m
    CONFIG_TR=y
    CONFIG_IBMOL=m
    CONFIG_3C359=m
    CONFIG_TMS380TR=m
    CONFIG_TMSPCI=m
    CONFIG_ABYSS=m

    #
    # Wireless LAN
    #
    CONFIG_WLAN_PRE80211=y
    CONFIG_PCMCIA_WAVELAN=m
    CONFIG_PCMCIA_NETWAVE=m
    CONFIG_WLAN_80211=y
    CONFIG_PCMCIA_RAYCS=m
    CONFIG_IPW2100=m
    CONFIG_IPW2100_MONITOR=y
    # CONFIG_IPW2100_DEBUG is not set
    CONFIG_IPW2200=m
    CONFIG_IPW2200_MONITOR=y
    CONFIG_IPW2200_RADIOTAP=y
    CONFIG_IPW2200_PROMISCUOUS=y
    CONFIG_IPW2200_QOS=y
    # CONFIG_IPW2200_DEBUG is not set
    CONFIG_LIBERTAS=m
    CONFIG_LIBERTAS_USB=m
    CONFIG_LIBERTAS_CS=m
    CONFIG_LIBERTAS_SDIO=m
    # CONFIG_LIBERTAS_DEBUG is not set
    CONFIG_AIRO=m
    CONFIG_HERMES=m
    CONFIG_PLX_HERMES=m
    CONFIG_TMD_HERMES=m
    CONFIG_NORTEL_HERMES=m
    CONFIG_PCI_HERMES=m
    CONFIG_PCMCIA_HERMES=m
    CONFIG_PCMCIA_SPECTRUM=m
    CONFIG_ATMEL=m
    CONFIG_PCI_ATMEL=m
    CONFIG_PCMCIA_ATMEL=m
    CONFIG_AIRO_CS=m
    CONFIG_PCMCIA_WL3501=m
    CONFIG_PRISM54=m
    CONFIG_USB_ZD1201=m
    CONFIG_USB_NET_RNDIS_WLAN=m
    CONFIG_RTL8180=m
    CONFIG_RTL8187=m
    CONFIG_ADM8211=m
    CONFIG_MAC80211_HWSIM=m
    CONFIG_P54_COMMON=m
    CONFIG_P54_USB=m
    CONFIG_P54_PCI=m
    CONFIG_ATH5K=m
    # CONFIG_ATH5K_DEBUG is not set
    CONFIG_IWLWIFI=m
    CONFIG_IWLCORE=m
    CONFIG_IWLWIFI_LEDS=y
    CONFIG_IWLWIFI_RFKILL=y
    CONFIG_IWL4965=m
    CONFIG_IWL4965_LEDS=y
    CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y
    # CONFIG_IWLWIFI_DEBUG is not set
    CONFIG_IWL5000=y
    CONFIG_IWL3945=m
    CONFIG_IWL3945_RFKILL=y
    CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
    CONFIG_IWL3945_LEDS=y
    # CONFIG_IWL3945_DEBUG is not set
    CONFIG_HOSTAP=m
    CONFIG_HOSTAP_FIRMWARE=y
    CONFIG_HOSTAP_FIRMWARE_NVRAM=y
    CONFIG_HOSTAP_PLX=m
    CONFIG_HOSTAP_PCI=m
    CONFIG_HOSTAP_CS=m
    CONFIG_B43=m
    CONFIG_B43_PCI_AUTOSELECT=y
    CONFIG_B43_PCICORE_AUTOSELECT=y
    CONFIG_B43_PCMCIA=y
    CONFIG_B43_PIO=y
    CONFIG_B43_LEDS=y
    CONFIG_B43_RFKILL=y
    # CONFIG_B43_DEBUG is not set
    CONFIG_B43LEGACY=m
    CONFIG_B43LEGACY_PCI_AUTOSELECT=y
    CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
    CONFIG_B43LEGACY_LEDS=y
    CONFIG_B43LEGACY_RFKILL=y
    # CONFIG_B43LEGACY_DEBUG is not set
    CONFIG_B43LEGACY_DMA=y
    CONFIG_B43LEGACY_PIO=y
    CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
    # CONFIG_B43LEGACY_DMA_MODE is not set
    # CONFIG_B43LEGACY_PIO_MODE is not set
    CONFIG_ZD1211RW=m
    # CONFIG_ZD1211RW_DEBUG is not set
    CONFIG_RT2X00=m
    CONFIG_RT2X00_LIB=m
    CONFIG_RT2X00_LIB_PCI=m
    CONFIG_RT2X00_LIB_USB=m
    CONFIG_RT2X00_LIB_FIRMWARE=y
    CONFIG_RT2X00_LIB_RFKILL=y
    CONFIG_RT2X00_LIB_LEDS=y
    CONFIG_RT2400PCI=m
    CONFIG_RT2400PCI_RFKILL=y
    CONFIG_RT2400PCI_LEDS=y
    CONFIG_RT2500PCI=m
    CONFIG_RT2500PCI_RFKILL=y
    CONFIG_RT2500PCI_LEDS=y
    CONFIG_RT61PCI=m
    CONFIG_RT61PCI_RFKILL=y
    CONFIG_RT61PCI_LEDS=y
    CONFIG_RT2500USB=m
    CONFIG_RT2500USB_LEDS=y
    CONFIG_RT73USB=m
    CONFIG_RT73USB_LEDS=y
    # CONFIG_RT2X00_LIB_DEBUGFS is not set
    # CONFIG_RT2X00_DEBUG is not set

    #
    # USB Network Adapters
    #
    CONFIG_USB_CATC=m
    CONFIG_USB_KAWETH=m
    CONFIG_USB_PEGASUS=m
    CONFIG_USB_RTL8150=m
    CONFIG_USB_USBNET=m
    CONFIG_USB_NET_AX8817X=m
    CONFIG_USB_HSO=m
    CONFIG_USB_NET_CDCETHER=m
    CONFIG_USB_NET_DM9601=m
    CONFIG_USB_NET_GL620A=m
    CONFIG_USB_NET_NET1080=m
    CONFIG_USB_NET_PLUSB=m
    CONFIG_USB_NET_MCS7830=m
    CONFIG_USB_NET_RNDIS_HOST=m
    CONFIG_USB_NET_CDC_SUBSET=m
    CONFIG_USB_ALI_M5632=y
    CONFIG_USB_AN2720=y
    CONFIG_USB_BELKIN=y
    CONFIG_USB_ARMLINUX=y
    CONFIG_USB_EPSON2888=y
    CONFIG_USB_KC2190=y
    CONFIG_USB_NET_ZAURUS=m
    CONFIG_NET_PCMCIA=y
    CONFIG_PCMCIA_3C589=m
    CONFIG_PCMCIA_3C574=m
    CONFIG_PCMCIA_FMVJ18X=m
    CONFIG_PCMCIA_PCNET=m
    CONFIG_PCMCIA_NMCLAN=m
    CONFIG_PCMCIA_SMC91C92=m
    CONFIG_PCMCIA_XIRC2PS=m
    CONFIG_PCMCIA_AXNET=m
    # CONFIG_WAN is not set
    CONFIG_ATM_DRIVERS=y
    CONFIG_ATM_DUMMY=m
    CONFIG_ATM_TCP=m
    CONFIG_ATM_LANAI=m
    CONFIG_ATM_ENI=m
    # CONFIG_ATM_ENI_DEBUG is not set
    # CONFIG_ATM_ENI_TUNE_BURST is not set
    CONFIG_ATM_FIRESTREAM=m
    CONFIG_ATM_ZATM=m
    # CONFIG_ATM_ZATM_DEBUG is not set
    CONFIG_ATM_IDT77252=m
    # CONFIG_ATM_IDT77252_DEBUG is not set
    # CONFIG_ATM_IDT77252_RCV_ALL is not set
    CONFIG_ATM_IDT77252_USE_SUNI=y
    CONFIG_ATM_AMBASSADOR=m
    # CONFIG_ATM_AMBASSADOR_DEBUG is not set
    CONFIG_ATM_HORIZON=m
    # CONFIG_ATM_HORIZON_DEBUG is not set
    CONFIG_ATM_IA=m
    # CONFIG_ATM_IA_DEBUG is not set
    CONFIG_ATM_FORE200E=m
    CONFIG_ATM_FORE200E_USE_TASKLET=y
    CONFIG_ATM_FORE200E_TX_RETRY=16
    CONFIG_ATM_FORE200E_DEBUG=0
    CONFIG_ATM_HE=m
    CONFIG_ATM_HE_USE_SUNI=y
    CONFIG_FDDI=y
    # CONFIG_DEFXX is not set
    CONFIG_SKFP=m
    CONFIG_HIPPI=y
    CONFIG_ROADRUNNER=m
    CONFIG_ROADRUNNER_LARGE_RINGS=y
    CONFIG_PLIP=m
    CONFIG_PPP=m
    CONFIG_PPP_MULTILINK=y
    CONFIG_PPP_FILTER=y
    CONFIG_PPP_ASYNC=m
    CONFIG_PPP_SYNC_TTY=m
    CONFIG_PPP_DEFLATE=m
    CONFIG_PPP_BSDCOMP=m
    CONFIG_PPP_MPPE=m
    CONFIG_PPPOE=m
    CONFIG_PPPOATM=m
    CONFIG_PPPOL2TP=m
    CONFIG_SLIP=m
    CONFIG_SLIP_COMPRESSED=y
    CONFIG_SLHC=m
    CONFIG_SLIP_SMART=y
    CONFIG_SLIP_MODE_SLIP6=y
    CONFIG_NET_FC=y
    CONFIG_NETCONSOLE=m
    CONFIG_NETCONSOLE_DYNAMIC=y
    CONFIG_NETPOLL=y
    CONFIG_NETPOLL_TRAP=y
    CONFIG_NET_POLL_CONTROLLER=y
    CONFIG_VIRTIO_NET=m
    CONFIG_ISDN=m
    CONFIG_ISDN_I4L=m
    CONFIG_ISDN_PPP=y
    CONFIG_ISDN_PPP_VJ=y
    CONFIG_ISDN_MPP=y
    CONFIG_IPPP_FILTER=y
    CONFIG_ISDN_PPP_BSDCOMP=m
    CONFIG_ISDN_AUDIO=y
    CONFIG_ISDN_TTY_FAX=y
    CONFIG_ISDN_X25=y

    #
    # ISDN feature submodules
    #
    CONFIG_ISDN_DIVERSION=m

    #
    # ISDN4Linux hardware drivers
    #

    #
    # Passive cards
    #
    CONFIG_ISDN_DRV_HISAX=m

    #
    # D-channel protocol features
    #
    CONFIG_HISAX_EURO=y
    CONFIG_DE_AOC=y
    # CONFIG_HISAX_NO_SENDCOMPLETE is not set
    # CONFIG_HISAX_NO_LLC is not set
    # CONFIG_HISAX_NO_KEYPAD is not set
    CONFIG_HISAX_1TR6=y
    CONFIG_HISAX_NI1=y
    CONFIG_HISAX_MAX_CARDS=8

    #
    # HiSax supported cards
    #
    CONFIG_HISAX_16_3=y
    CONFIG_HISAX_TELESPCI=y
    CONFIG_HISAX_S0BOX=y
    CONFIG_HISAX_FRITZPCI=y
    CONFIG_HISAX_AVM_A1_PCMCIA=y
    CONFIG_HISAX_ELSA=y
    CONFIG_HISAX_DIEHLDIVA=y
    CONFIG_HISAX_SEDLBAUER=y
    CONFIG_HISAX_NETJET=y
    CONFIG_HISAX_NETJET_U=y
    CONFIG_HISAX_NICCY=y
    CONFIG_HISAX_BKM_A4T=y
    CONFIG_HISAX_SCT_QUADRO=y
    CONFIG_HISAX_GAZEL=y
    CONFIG_HISAX_HFC_PCI=y
    CONFIG_HISAX_W6692=y
    CONFIG_HISAX_HFC_SX=y
    CONFIG_HISAX_ENTERNOW_PCI=y
    CONFIG_HISAX_DEBUG=y

    #
    # HiSax PCMCIA card service modules
    #
    CONFIG_HISAX_SEDLBAUER_CS=m
    CONFIG_HISAX_ELSA_CS=m
    CONFIG_HISAX_AVM_A1_CS=m
    CONFIG_HISAX_TELES_CS=m

    #
    # HiSax sub driver modules
    #
    CONFIG_HISAX_ST5481=m
    CONFIG_HISAX_HFCUSB=m
    CONFIG_HISAX_HFC4S8S=m
    CONFIG_HISAX_FRITZ_PCIPNP=m
    CONFIG_HISAX_HDLC=y

    #
    # Active cards
    #
    CONFIG_HYSDN=m
    CONFIG_HYSDN_CAPI=y
    CONFIG_ISDN_DRV_GIGASET=m
    CONFIG_GIGASET_BASE=m
    CONFIG_GIGASET_M105=m
    CONFIG_GIGASET_M101=m
    # CONFIG_GIGASET_DEBUG is not set
    CONFIG_GIGASET_UNDOCREQ=y
    CONFIG_ISDN_CAPI=m
    CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
    CONFIG_CAPI_TRACE=y
    CONFIG_ISDN_CAPI_MIDDLEWARE=y
    CONFIG_ISDN_CAPI_CAPI20=m
    CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
    CONFIG_ISDN_CAPI_CAPIFS=m
    CONFIG_ISDN_CAPI_CAPIDRV=m

    #
    # CAPI hardware drivers
    #
    CONFIG_CAPI_AVM=y
    CONFIG_ISDN_DRV_AVMB1_B1PCI=m
    CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
    CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
    CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
    CONFIG_ISDN_DRV_AVMB1_T1PCI=m
    CONFIG_ISDN_DRV_AVMB1_C4=m
    # CONFIG_CAPI_EICON is not set
    CONFIG_PHONE=m
    CONFIG_PHONE_IXJ=m
    CONFIG_PHONE_IXJ_PCMCIA=m

    #
    # Input device support
    #
    CONFIG_INPUT=y
    CONFIG_INPUT_FF_MEMLESS=m
    CONFIG_INPUT_POLLDEV=m

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=m
    CONFIG_INPUT_EVDEV=y
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    CONFIG_KEYBOARD_SUNKBD=m
    # CONFIG_KEYBOARD_LKKBD is not set
    CONFIG_KEYBOARD_XTKBD=m
    CONFIG_KEYBOARD_NEWTON=m
    # CONFIG_KEYBOARD_STOWAWAY is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_MOUSE_PS2_ALPS=y
    CONFIG_MOUSE_PS2_LOGIPS2PP=y
    CONFIG_MOUSE_PS2_SYNAPTICS=y
    CONFIG_MOUSE_PS2_LIFEBOOK=y
    CONFIG_MOUSE_PS2_TRACKPOINT=y
    # CONFIG_MOUSE_PS2_TOUCHKIT is not set
    CONFIG_MOUSE_SERIAL=m
    CONFIG_MOUSE_APPLETOUCH=m
    # CONFIG_MOUSE_VSXXXAA is not set
    CONFIG_INPUT_JOYSTICK=y
    CONFIG_JOYSTICK_ANALOG=m
    CONFIG_JOYSTICK_A3D=m
    CONFIG_JOYSTICK_ADI=m
    CONFIG_JOYSTICK_COBRA=m
    CONFIG_JOYSTICK_GF2K=m
    CONFIG_JOYSTICK_GRIP=m
    CONFIG_JOYSTICK_GRIP_MP=m
    CONFIG_JOYSTICK_GUILLEMOT=m
    CONFIG_JOYSTICK_INTERACT=m
    CONFIG_JOYSTICK_SIDEWINDER=m
    CONFIG_JOYSTICK_TMDC=m
    CONFIG_JOYSTICK_IFORCE=m
    CONFIG_JOYSTICK_IFORCE_USB=y
    CONFIG_JOYSTICK_IFORCE_232=y
    CONFIG_JOYSTICK_WARRIOR=m
    CONFIG_JOYSTICK_MAGELLAN=m
    CONFIG_JOYSTICK_SPACEORB=m
    CONFIG_JOYSTICK_SPACEBALL=m
    CONFIG_JOYSTICK_STINGER=m
    CONFIG_JOYSTICK_TWIDJOY=m
    CONFIG_JOYSTICK_ZHENHUA=m
    CONFIG_JOYSTICK_DB9=m
    CONFIG_JOYSTICK_GAMECON=m
    CONFIG_JOYSTICK_TURBOGRAFX=m
    CONFIG_JOYSTICK_JOYDUMP=m
    CONFIG_JOYSTICK_XPAD=m
    CONFIG_JOYSTICK_XPAD_FF=y
    CONFIG_JOYSTICK_XPAD_LEDS=y
    CONFIG_INPUT_TABLET=y
    CONFIG_TABLET_USB_ACECAD=m
    CONFIG_TABLET_USB_AIPTEK=m
    CONFIG_TABLET_USB_GTCO=m
    CONFIG_TABLET_USB_KBTAB=m
    CONFIG_TABLET_USB_WACOM=m
    CONFIG_INPUT_TOUCHSCREEN=y
    CONFIG_TOUCHSCREEN_ADS7846=m
    CONFIG_TOUCHSCREEN_FUJITSU=m
    CONFIG_TOUCHSCREEN_GUNZE=m
    CONFIG_TOUCHSCREEN_ELO=m
    CONFIG_TOUCHSCREEN_MTOUCH=m
    CONFIG_TOUCHSCREEN_INEXIO=m
    CONFIG_TOUCHSCREEN_MK712=m
    CONFIG_TOUCHSCREEN_PENMOUNT=m
    CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
    CONFIG_TOUCHSCREEN_TOUCHWIN=m
    CONFIG_TOUCHSCREEN_UCB1400=m
    CONFIG_TOUCHSCREEN_WM97XX=m
    CONFIG_TOUCHSCREEN_WM9705=y
    CONFIG_TOUCHSCREEN_WM9712=y
    CONFIG_TOUCHSCREEN_WM9713=y
    CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
    CONFIG_TOUCHSCREEN_USB_EGALAX=y
    CONFIG_TOUCHSCREEN_USB_PANJIT=y
    CONFIG_TOUCHSCREEN_USB_3M=y
    CONFIG_TOUCHSCREEN_USB_ITM=y
    CONFIG_TOUCHSCREEN_USB_ETURBO=y
    CONFIG_TOUCHSCREEN_USB_GUNZE=y
    CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
    CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
    CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
    CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
    CONFIG_TOUCHSCREEN_USB_GOTOP=y
    CONFIG_TOUCHSCREEN_TOUCHIT213=m
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=m
    CONFIG_INPUT_APANEL=m
    CONFIG_INPUT_ATLAS_BTNS=m
    CONFIG_INPUT_ATI_REMOTE=m
    CONFIG_INPUT_ATI_REMOTE2=m
    CONFIG_INPUT_KEYSPAN_REMOTE=m
    CONFIG_INPUT_POWERMATE=m
    # CONFIG_INPUT_YEALINK is not set
    CONFIG_INPUT_UINPUT=m

    #
    # Hardware I/O ports
    #
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    CONFIG_SERIO_SERPORT=m
    CONFIG_SERIO_CT82C710=m
    CONFIG_SERIO_PARKBD=m
    CONFIG_SERIO_PCIPS2=m
    CONFIG_SERIO_LIBPS2=y
    CONFIG_SERIO_RAW=m
    CONFIG_GAMEPORT=m
    CONFIG_GAMEPORT_NS558=m
    CONFIG_GAMEPORT_L4=m
    CONFIG_GAMEPORT_EMU10K1=m
    CONFIG_GAMEPORT_FM801=m

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_CONSOLE_TRANSLATIONS=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    CONFIG_VT_HW_CONSOLE_BINDING=y
    CONFIG_DEVKMEM=y
    CONFIG_SERIAL_NONSTANDARD=y
    CONFIG_COMPUTONE=m
    CONFIG_ROCKETPORT=m
    CONFIG_CYCLADES=m
    # CONFIG_CYZ_INTR is not set
    CONFIG_DIGIEPCA=m
    CONFIG_MOXA_INTELLIO=m
    CONFIG_MOXA_SMARTIO=m
    CONFIG_ISI=m
    CONFIG_SYNCLINK=m
    CONFIG_SYNCLINKMP=m
    CONFIG_SYNCLINK_GT=m
    CONFIG_N_HDLC=m
    CONFIG_RISCOM8=m
    CONFIG_SPECIALIX=m
    # CONFIG_SPECIALIX_RTSCTS is not set
    CONFIG_SX=m
    CONFIG_RIO=m
    CONFIG_RIO_OLDPCI=y
    CONFIG_STALDRV=y
    CONFIG_NOZOMI=m

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_FIX_EARLYCON_MEM=y
    CONFIG_SERIAL_8250_PCI=y
    CONFIG_SERIAL_8250_PNP=y
    CONFIG_SERIAL_8250_CS=m
    CONFIG_SERIAL_8250_NR_UARTS=4
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_SERIAL_JSM=m
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=0
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    CONFIG_PPDEV=m
    CONFIG_HVC_DRIVER=y
    CONFIG_VIRTIO_CONSOLE=m
    CONFIG_IPMI_HANDLER=m
    CONFIG_IPMI_PANIC_EVENT=y
    # CONFIG_IPMI_PANIC_STRING is not set
    CONFIG_IPMI_DEVICE_INTERFACE=m
    CONFIG_IPMI_SI=m
    CONFIG_IPMI_WATCHDOG=m
    CONFIG_IPMI_POWEROFF=m
    CONFIG_HW_RANDOM=y
    CONFIG_HW_RANDOM_INTEL=m
    CONFIG_HW_RANDOM_AMD=m
    CONFIG_HW_RANDOM_VIRTIO=m
    CONFIG_NVRAM=y
    CONFIG_R3964=m
    CONFIG_APPLICOM=m

    #
    # PCMCIA character devices
    #
    CONFIG_SYNCLINK_CS=m
    CONFIG_CARDMAN_4000=m
    CONFIG_CARDMAN_4040=m
    CONFIG_IPWIRELESS=m
    # CONFIG_MWAVE is not set
    CONFIG_PC8736x_GPIO=m
    CONFIG_NSC_GPIO=m
    CONFIG_RAW_DRIVER=m
    CONFIG_MAX_RAW_DEVS=4096
    CONFIG_HPET=y
    CONFIG_HPET_MMAP=y
    CONFIG_HANGCHECK_TIMER=m
    CONFIG_TCG_TPM=m
    CONFIG_TCG_TIS=m
    CONFIG_TCG_NSC=m
    CONFIG_TCG_ATMEL=m
    CONFIG_TCG_INFINEON=m
    CONFIG_TELCLOCK=m
    CONFIG_DEVPORT=y
    CONFIG_I2C=m
    CONFIG_I2C_BOARDINFO=y
    CONFIG_I2C_CHARDEV=m
    CONFIG_I2C_ALGOBIT=m
    CONFIG_I2C_ALGOPCA=m

    #
    # I2C Hardware Bus support
    #

    #
    # PC SMBus host controller drivers
    #
    CONFIG_I2C_ALI1535=m
    CONFIG_I2C_ALI1563=m
    CONFIG_I2C_ALI15X3=m
    CONFIG_I2C_AMD756=m
    CONFIG_I2C_AMD756_S4882=m
    CONFIG_I2C_AMD8111=m
    CONFIG_I2C_I801=m
    CONFIG_I2C_ISCH=m
    CONFIG_I2C_PIIX4=m
    CONFIG_I2C_NFORCE2=m
    CONFIG_I2C_NFORCE2_S4985=m
    CONFIG_I2C_SIS5595=m
    CONFIG_I2C_SIS630=m
    CONFIG_I2C_SIS96X=m
    CONFIG_I2C_VIA=m
    CONFIG_I2C_VIAPRO=m

    #
    # I2C system bus drivers (mostly embedded / system-on-chip)
    #
    CONFIG_I2C_OCORES=m
    CONFIG_I2C_SIMTEC=m

    #
    # External I2C/SMBus adapter drivers
    #
    CONFIG_I2C_PARPORT=m
    CONFIG_I2C_PARPORT_LIGHT=m
    CONFIG_I2C_TAOS_EVM=m
    CONFIG_I2C_TINY_USB=m

    #
    # Graphics adapter I2C/DDC channel drivers
    #
    CONFIG_I2C_VOODOO3=m

    #
    # Other I2C/SMBus bus drivers
    #
    CONFIG_I2C_PCA_PLATFORM=m
    CONFIG_I2C_STUB=m

    #
    # Miscellaneous I2C Chip support
    #
    CONFIG_DS1682=m
    CONFIG_AT24=m
    CONFIG_SENSORS_EEPROM=m
    CONFIG_SENSORS_PCF8574=m
    CONFIG_PCF8575=m
    # CONFIG_SENSORS_PCA9539 is not set
    CONFIG_SENSORS_PCF8591=m
    CONFIG_SENSORS_MAX6875=m
    CONFIG_SENSORS_TSL2550=m
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set
    CONFIG_SPI=y
    CONFIG_SPI_DEBUG=y
    CONFIG_SPI_MASTER=y

    #
    # SPI Master Controller Drivers
    #
    CONFIG_SPI_BITBANG=m
    CONFIG_SPI_BUTTERFLY=m
    CONFIG_SPI_LM70_LLP=m

    #
    # SPI Protocol Masters
    #
    CONFIG_SPI_AT25=m
    CONFIG_SPI_SPIDEV=m
    CONFIG_SPI_TLE62X0=m
    CONFIG_W1=m
    CONFIG_W1_CON=y

    #
    # 1-wire Bus Masters
    #
    CONFIG_W1_MASTER_MATROX=m
    CONFIG_W1_MASTER_DS2490=m
    CONFIG_W1_MASTER_DS2482=m

    #
    # 1-wire Slaves
    #
    CONFIG_W1_SLAVE_THERM=m
    CONFIG_W1_SLAVE_SMEM=m
    CONFIG_W1_SLAVE_DS2433=m
    CONFIG_W1_SLAVE_DS2433_CRC=y
    CONFIG_W1_SLAVE_DS2760=m
    CONFIG_POWER_SUPPLY=y
    # CONFIG_POWER_SUPPLY_DEBUG is not set
    CONFIG_PDA_POWER=m
    CONFIG_BATTERY_DS2760=m
    CONFIG_HWMON=y
    CONFIG_HWMON_VID=m
    CONFIG_SENSORS_ABITUGURU=m
    CONFIG_SENSORS_ABITUGURU3=m
    CONFIG_SENSORS_AD7418=m
    CONFIG_SENSORS_ADM1021=m
    CONFIG_SENSORS_ADM1025=m
    CONFIG_SENSORS_ADM1026=m
    CONFIG_SENSORS_ADM1029=m
    CONFIG_SENSORS_ADM1031=m
    CONFIG_SENSORS_ADM9240=m
    CONFIG_SENSORS_ADT7470=m
    CONFIG_SENSORS_ADT7473=m
    CONFIG_SENSORS_K8TEMP=m
    CONFIG_SENSORS_ASB100=m
    CONFIG_SENSORS_ATXP1=m
    CONFIG_SENSORS_DS1621=m
    CONFIG_SENSORS_I5K_AMB=m
    CONFIG_SENSORS_F71805F=m
    CONFIG_SENSORS_F71882FG=m
    CONFIG_SENSORS_F75375S=m
    CONFIG_SENSORS_FSCHER=m
    CONFIG_SENSORS_FSCPOS=m
    CONFIG_SENSORS_FSCHMD=m
    CONFIG_SENSORS_GL518SM=m
    CONFIG_SENSORS_GL520SM=m
    CONFIG_SENSORS_CORETEMP=m
    CONFIG_SENSORS_IBMAEM=m
    CONFIG_SENSORS_IBMPEX=m
    CONFIG_SENSORS_IT87=m
    CONFIG_SENSORS_LM63=m
    CONFIG_SENSORS_LM70=m
    CONFIG_SENSORS_LM75=m
    CONFIG_SENSORS_LM77=m
    CONFIG_SENSORS_LM78=m
    CONFIG_SENSORS_LM80=m
    CONFIG_SENSORS_LM83=m
    CONFIG_SENSORS_LM85=m
    CONFIG_SENSORS_LM87=m
    CONFIG_SENSORS_LM90=m
    CONFIG_SENSORS_LM92=m
    CONFIG_SENSORS_LM93=m
    CONFIG_SENSORS_MAX1619=m
    CONFIG_SENSORS_MAX6650=m
    CONFIG_SENSORS_PC87360=m
    CONFIG_SENSORS_PC87427=m
    CONFIG_SENSORS_SIS5595=m
    CONFIG_SENSORS_DME1737=m
    CONFIG_SENSORS_SMSC47M1=m
    CONFIG_SENSORS_SMSC47M192=m
    CONFIG_SENSORS_SMSC47B397=m
    CONFIG_SENSORS_ADS7828=m
    CONFIG_SENSORS_THMC50=m
    CONFIG_SENSORS_VIA686A=m
    CONFIG_SENSORS_VT1211=m
    CONFIG_SENSORS_VT8231=m
    CONFIG_SENSORS_W83781D=m
    CONFIG_SENSORS_W83791D=m
    CONFIG_SENSORS_W83792D=m
    CONFIG_SENSORS_W83793=m
    CONFIG_SENSORS_W83L785TS=m
    CONFIG_SENSORS_W83L786NG=m
    CONFIG_SENSORS_W83627HF=m
    CONFIG_SENSORS_W83627EHF=m
    CONFIG_SENSORS_HDAPS=m
    CONFIG_SENSORS_APPLESMC=m
    # CONFIG_HWMON_DEBUG_CHIP is not set
    CONFIG_THERMAL=y
    CONFIG_THERMAL_HWMON=y
    CONFIG_WATCHDOG=y
    # CONFIG_WATCHDOG_NOWAYOUT is not set

    #
    # Watchdog Device Drivers
    #
    CONFIG_SOFT_WATCHDOG=m
    CONFIG_ACQUIRE_WDT=m
    CONFIG_ADVANTECH_WDT=m
    CONFIG_ALIM1535_WDT=m
    CONFIG_ALIM7101_WDT=m
    CONFIG_SC520_WDT=m
    CONFIG_EUROTECH_WDT=m
    CONFIG_IB700_WDT=m
    CONFIG_IBMASR=m
    CONFIG_WAFER_WDT=m
    CONFIG_I6300ESB_WDT=m
    CONFIG_ITCO_WDT=m
    CONFIG_ITCO_VENDOR_SUPPORT=y
    CONFIG_IT8712F_WDT=m
    CONFIG_HP_WATCHDOG=m
    CONFIG_SC1200_WDT=m
    CONFIG_PC87413_WDT=m
    CONFIG_60XX_WDT=m
    CONFIG_SBC8360_WDT=m
    CONFIG_CPU5_WDT=m
    CONFIG_SMSC37B787_WDT=m
    CONFIG_W83627HF_WDT=m
    CONFIG_W83697HF_WDT=m
    CONFIG_W83877F_WDT=m
    CONFIG_W83977F_WDT=m
    CONFIG_MACHZ_WDT=m
    CONFIG_SBC_EPX_C3_WATCHDOG=m

    #
    # PCI-based Watchdog Cards
    #
    CONFIG_PCIPCWATCHDOG=m
    CONFIG_WDTPCI=m
    CONFIG_WDT_501_PCI=y

    #
    # USB-based Watchdog Cards
    #
    CONFIG_USBPCWATCHDOG=m

    #
    # Sonics Silicon Backplane
    #
    CONFIG_SSB_POSSIBLE=y
    CONFIG_SSB=m
    CONFIG_SSB_SPROM=y
    CONFIG_SSB_BLOCKIO=y
    CONFIG_SSB_PCIHOST_POSSIBLE=y
    CONFIG_SSB_PCIHOST=y
    CONFIG_SSB_B43_PCI_BRIDGE=y
    CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
    CONFIG_SSB_PCMCIAHOST=y
    # CONFIG_SSB_DEBUG is not set
    CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
    CONFIG_SSB_DRIVER_PCICORE=y

    #
    # Multifunction device drivers
    #
    # CONFIG_MFD_CORE is not set
    CONFIG_MFD_SM501=m
    CONFIG_HTC_PASIC3=m

    #
    # Multimedia devices
    #

    #
    # Multimedia core support
    #
    CONFIG_VIDEO_DEV=m
    CONFIG_VIDEO_V4L2_COMMON=m
    # CONFIG_VIDEO_ALLOW_V4L1 is not set
    CONFIG_VIDEO_V4L1_COMPAT=y
    CONFIG_DVB_CORE=m
    CONFIG_VIDEO_MEDIA=m

    #
    # Multimedia drivers
    #
    CONFIG_VIDEO_SAA7146=m
    CONFIG_VIDEO_SAA7146_VV=m
    CONFIG_MEDIA_ATTACH=y
    CONFIG_MEDIA_TUNER=m
    # CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
    CONFIG_MEDIA_TUNER_SIMPLE=m
    CONFIG_MEDIA_TUNER_TDA8290=m
    CONFIG_MEDIA_TUNER_TDA827X=m
    CONFIG_MEDIA_TUNER_TDA18271=m
    CONFIG_MEDIA_TUNER_TDA9887=m
    CONFIG_MEDIA_TUNER_TEA5761=m
    CONFIG_MEDIA_TUNER_TEA5767=m
    CONFIG_MEDIA_TUNER_MT20XX=m
    CONFIG_MEDIA_TUNER_MT2060=m
    CONFIG_MEDIA_TUNER_MT2266=m
    CONFIG_MEDIA_TUNER_MT2131=m
    CONFIG_MEDIA_TUNER_QT1010=m
    CONFIG_MEDIA_TUNER_XC2028=m
    CONFIG_MEDIA_TUNER_XC5000=m
    CONFIG_MEDIA_TUNER_MXL5005S=m
    CONFIG_VIDEO_V4L2=m
    CONFIG_VIDEOBUF_GEN=m
    CONFIG_VIDEOBUF_DMA_SG=m
    CONFIG_VIDEOBUF_VMALLOC=m
    CONFIG_VIDEOBUF_DVB=m
    CONFIG_VIDEO_BTCX=m
    CONFIG_VIDEO_IR_I2C=m
    CONFIG_VIDEO_IR=m
    CONFIG_VIDEO_TVEEPROM=m
    CONFIG_VIDEO_TUNER=m
    CONFIG_VIDEO_CAPTURE_DRIVERS=y
    # CONFIG_VIDEO_ADV_DEBUG is not set
    CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
    CONFIG_VIDEO_TVAUDIO=m
    CONFIG_VIDEO_TDA7432=m
    CONFIG_VIDEO_TDA9875=m
    CONFIG_VIDEO_MSP3400=m
    CONFIG_VIDEO_CS5345=m
    CONFIG_VIDEO_CS53L32A=m
    CONFIG_VIDEO_WM8775=m
    CONFIG_VIDEO_OV7670=m
    CONFIG_VIDEO_SAA711X=m
    CONFIG_VIDEO_TVP5150=m
    CONFIG_VIDEO_CX25840=m
    CONFIG_VIDEO_CX2341X=m
    CONFIG_VIDEO_VIVI=m
    CONFIG_VIDEO_BT848=m
    CONFIG_VIDEO_BT848_DVB=y
    CONFIG_VIDEO_SAA6588=m
    CONFIG_VIDEO_SAA5246A=m
    CONFIG_VIDEO_SAA5249=m
    CONFIG_VIDEO_SAA7134=m
    CONFIG_VIDEO_SAA7134_ALSA=m
    CONFIG_VIDEO_SAA7134_DVB=m
    CONFIG_VIDEO_HEXIUM_ORION=m
    CONFIG_VIDEO_HEXIUM_GEMINI=m
    CONFIG_VIDEO_CX88=m
    CONFIG_VIDEO_CX88_ALSA=m
    CONFIG_VIDEO_CX88_BLACKBIRD=m
    CONFIG_VIDEO_CX88_DVB=m
    CONFIG_VIDEO_CX88_VP3054=m
    CONFIG_VIDEO_CX23885=m
    CONFIG_VIDEO_AU0828=m
    CONFIG_VIDEO_CX18=m
    CONFIG_VIDEO_CAFE_CCIC=m
    CONFIG_V4L_USB_DRIVERS=y
    CONFIG_USB_VIDEO_CLASS=m
    CONFIG_USB_GSPCA=m
    CONFIG_VIDEO_PVRUSB2=m
    CONFIG_VIDEO_PVRUSB2_SYSFS=y
    CONFIG_VIDEO_PVRUSB2_DVB=y
    # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
    CONFIG_VIDEO_EM28XX=m
    CONFIG_VIDEO_EM28XX_ALSA=m
    CONFIG_VIDEO_EM28XX_DVB=m
    CONFIG_VIDEO_USBVISION=m
    CONFIG_USB_ET61X251=m
    CONFIG_USB_SN9C102=m
    CONFIG_USB_ZC0301=m
    CONFIG_USB_ZR364XX=m
    CONFIG_USB_STKWEBCAM=m
    CONFIG_USB_S2255=m
    CONFIG_SOC_CAMERA=m
    CONFIG_SOC_CAMERA_MT9M001=m
    CONFIG_SOC_CAMERA_MT9V022=m
    CONFIG_RADIO_ADAPTERS=y
    CONFIG_RADIO_GEMTEK_PCI=m
    CONFIG_RADIO_MAXIRADIO=m
    CONFIG_RADIO_MAESTRO=m
    CONFIG_USB_DSBR=m
    CONFIG_USB_SI470X=m
    CONFIG_DVB_CAPTURE_DRIVERS=y

    #
    # Supported SAA7146 based PCI Adapters
    #
    CONFIG_TTPCI_EEPROM=m
    CONFIG_DVB_AV7110=m
    CONFIG_DVB_AV7110_OSD=y
    CONFIG_DVB_BUDGET_CORE=m
    CONFIG_DVB_BUDGET=m
    CONFIG_DVB_BUDGET_CI=m
    CONFIG_DVB_BUDGET_AV=m
    CONFIG_DVB_BUDGET_PATCH=m

    #
    # Supported USB Adapters
    #
    CONFIG_DVB_USB=m
    # CONFIG_DVB_USB_DEBUG is not set
    CONFIG_DVB_USB_A800=m
    CONFIG_DVB_USB_DIBUSB_MB=m
    # CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
    CONFIG_DVB_USB_DIBUSB_MC=m
    CONFIG_DVB_USB_DIB0700=m
    CONFIG_DVB_USB_UMT_010=m
    CONFIG_DVB_USB_CXUSB=m
    CONFIG_DVB_USB_M920X=m
    CONFIG_DVB_USB_GL861=m
    CONFIG_DVB_USB_AU6610=m
    CONFIG_DVB_USB_DIGITV=m
    CONFIG_DVB_USB_VP7045=m
    CONFIG_DVB_USB_VP702X=m
    CONFIG_DVB_USB_GP8PSK=m
    CONFIG_DVB_USB_NOVA_T_USB2=m
    CONFIG_DVB_USB_TTUSB2=m
    CONFIG_DVB_USB_DTT200U=m
    CONFIG_DVB_USB_OPERA1=m
    CONFIG_DVB_USB_AF9005=m
    CONFIG_DVB_USB_AF9005_REMOTE=m
    CONFIG_DVB_USB_ANYSEE=m
    CONFIG_DVB_TTUSB_BUDGET=m
    CONFIG_DVB_TTUSB_DEC=m
    CONFIG_DVB_CINERGYT2=m
    # CONFIG_DVB_CINERGYT2_TUNING is not set
    CONFIG_DVB_SIANO_SMS1XXX=m
    CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y

    #
    # Supported FlexCopII (B2C2) Adapters
    #
    CONFIG_DVB_B2C2_FLEXCOP=m
    CONFIG_DVB_B2C2_FLEXCOP_PCI=m
    CONFIG_DVB_B2C2_FLEXCOP_USB=m
    # CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

    #
    # Supported BT878 Adapters
    #
    CONFIG_DVB_BT8XX=m

    #
    # Supported Pluto2 Adapters
    #
    CONFIG_DVB_PLUTO2=m

    #
    # Supported DVB Frontends
    #

    #
    # Customise DVB Frontends
    #
    # CONFIG_DVB_FE_CUSTOMISE is not set

    #
    # DVB-S (satellite) frontends
    #
    CONFIG_DVB_CX24110=m
    CONFIG_DVB_CX24123=m
    CONFIG_DVB_MT312=m
    CONFIG_DVB_S5H1420=m
    CONFIG_DVB_STV0299=m
    CONFIG_DVB_TDA8083=m
    CONFIG_DVB_TDA10086=m
    CONFIG_DVB_VES1X93=m
    CONFIG_DVB_TUNER_ITD1000=m
    CONFIG_DVB_TDA826X=m
    CONFIG_DVB_TUA6100=m

    #
    # DVB-T (terrestrial) frontends
    #
    CONFIG_DVB_SP8870=m
    CONFIG_DVB_SP887X=m
    CONFIG_DVB_CX22700=m
    CONFIG_DVB_CX22702=m
    CONFIG_DVB_DRX397XD=m
    CONFIG_DVB_L64781=m
    CONFIG_DVB_TDA1004X=m
    CONFIG_DVB_NXT6000=m
    CONFIG_DVB_MT352=m
    CONFIG_DVB_ZL10353=m
    CONFIG_DVB_DIB3000MB=m
    CONFIG_DVB_DIB3000MC=m
    CONFIG_DVB_DIB7000M=m
    CONFIG_DVB_DIB7000P=m
    CONFIG_DVB_TDA10048=m

    #
    # DVB-C (cable) frontends
    #
    CONFIG_DVB_VES1820=m
    CONFIG_DVB_TDA10021=m
    CONFIG_DVB_TDA10023=m
    CONFIG_DVB_STV0297=m

    #
    # ATSC (North American/Korean Terrestrial/Cable DTV) frontends
    #
    CONFIG_DVB_NXT200X=m
    CONFIG_DVB_OR51211=m
    CONFIG_DVB_OR51132=m
    CONFIG_DVB_BCM3510=m
    CONFIG_DVB_LGDT330X=m
    CONFIG_DVB_S5H1409=m
    CONFIG_DVB_AU8522=m
    CONFIG_DVB_S5H1411=m

    #
    # Digital terrestrial only tuners/PLL
    #
    CONFIG_DVB_PLL=m
    CONFIG_DVB_TUNER_DIB0070=m

    #
    # SEC control devices for DVB-S
    #
    CONFIG_DVB_LNBP21=m
    CONFIG_DVB_ISL6405=m
    CONFIG_DVB_ISL6421=m
    CONFIG_DAB=y
    CONFIG_USB_DABUSB=m

    #
    # Graphics support
    #
    CONFIG_AGP=y
    CONFIG_AGP_AMD64=y
    CONFIG_AGP_INTEL=m
    CONFIG_AGP_SIS=m
    CONFIG_AGP_VIA=m
    CONFIG_DRM=m
    CONFIG_DRM_TDFX=m
    CONFIG_DRM_R128=m
    CONFIG_DRM_RADEON=m
    CONFIG_DRM_I810=m
    # CONFIG_DRM_I830 is not set
    CONFIG_DRM_I915=m
    CONFIG_DRM_MGA=m
    CONFIG_DRM_SIS=m
    CONFIG_DRM_VIA=m
    CONFIG_DRM_SAVAGE=m
    CONFIG_VGASTATE=m
    CONFIG_VIDEO_OUTPUT_CONTROL=m
    CONFIG_FB=y
    CONFIG_FIRMWARE_EDID=y
    CONFIG_FB_DDC=m
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
    CONFIG_FB_SYS_FILLRECT=m
    CONFIG_FB_SYS_COPYAREA=m
    CONFIG_FB_SYS_IMAGEBLIT=m
    # CONFIG_FB_FOREIGN_ENDIAN is not set
    CONFIG_FB_SYS_FOPS=m
    CONFIG_FB_DEFERRED_IO=y
    CONFIG_FB_HECUBA=m
    CONFIG_FB_SVGALIB=m
    # CONFIG_FB_MACMODES is not set
    CONFIG_FB_BACKLIGHT=y
    CONFIG_FB_MODE_HELPERS=y
    CONFIG_FB_TILEBLITTING=y

    #
    # Frame buffer hardware drivers
    #
    CONFIG_FB_CIRRUS=m
    # CONFIG_FB_PM2 is not set
    CONFIG_FB_CYBER2000=m
    CONFIG_FB_ARC=m
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    CONFIG_FB_VGA16=m
    CONFIG_FB_UVESA=m
    CONFIG_FB_VESA=y
    CONFIG_FB_EFI=y
    CONFIG_FB_IMAC=y
    CONFIG_FB_N411=m
    CONFIG_FB_HGA=m
    CONFIG_FB_HGA_ACCEL=y
    CONFIG_FB_S1D13XXX=m
    CONFIG_FB_NVIDIA=m
    CONFIG_FB_NVIDIA_I2C=y
    # CONFIG_FB_NVIDIA_DEBUG is not set
    CONFIG_FB_NVIDIA_BACKLIGHT=y
    CONFIG_FB_RIVA=m
    CONFIG_FB_RIVA_I2C=y
    # CONFIG_FB_RIVA_DEBUG is not set
    CONFIG_FB_RIVA_BACKLIGHT=y
    CONFIG_FB_LE80578=m
    CONFIG_FB_CARILLO_RANCH=m
    CONFIG_FB_INTEL=m
    # CONFIG_FB_INTEL_DEBUG is not set
    CONFIG_FB_INTEL_I2C=y
    CONFIG_FB_MATROX=m
    CONFIG_FB_MATROX_MILLENIUM=y
    CONFIG_FB_MATROX_MYSTIQUE=y
    CONFIG_FB_MATROX_G=y
    CONFIG_FB_MATROX_I2C=m
    CONFIG_FB_MATROX_MAVEN=m
    CONFIG_FB_MATROX_MULTIHEAD=y
    CONFIG_FB_RADEON=m
    CONFIG_FB_RADEON_I2C=y
    CONFIG_FB_RADEON_BACKLIGHT=y
    # CONFIG_FB_RADEON_DEBUG is not set
    CONFIG_FB_ATY128=m
    CONFIG_FB_ATY128_BACKLIGHT=y
    CONFIG_FB_ATY=m
    CONFIG_FB_ATY_CT=y
    CONFIG_FB_ATY_GENERIC_LCD=y
    CONFIG_FB_ATY_GX=y
    CONFIG_FB_ATY_BACKLIGHT=y
    # CONFIG_FB_S3 is not set
    CONFIG_FB_SAVAGE=m
    CONFIG_FB_SAVAGE_I2C=y
    CONFIG_FB_SAVAGE_ACCEL=y
    CONFIG_FB_SIS=m
    CONFIG_FB_SIS_300=y
    CONFIG_FB_SIS_315=y
    CONFIG_FB_NEOMAGIC=m
    CONFIG_FB_KYRO=m
    CONFIG_FB_3DFX=m
    CONFIG_FB_3DFX_ACCEL=y
    CONFIG_FB_VOODOO1=m
    CONFIG_FB_VT8623=m
    CONFIG_FB_TRIDENT=m
    CONFIG_FB_TRIDENT_ACCEL=y
    CONFIG_FB_ARK=m
    CONFIG_FB_PM3=m
    CONFIG_FB_GEODE=y
    CONFIG_FB_GEODE_LX=m
    CONFIG_FB_GEODE_GX=m
    CONFIG_FB_GEODE_GX1=m
    CONFIG_FB_SM501=m
    CONFIG_FB_VIRTUAL=m
    CONFIG_BACKLIGHT_LCD_SUPPORT=y
    CONFIG_LCD_CLASS_DEVICE=m
    CONFIG_LCD_LTV350QV=m
    CONFIG_BACKLIGHT_CLASS_DEVICE=y
    CONFIG_BACKLIGHT_CORGI=m
    CONFIG_BACKLIGHT_PROGEAR=m
    CONFIG_BACKLIGHT_CARILLO_RANCH=m
    CONFIG_BACKLIGHT_MBP_NVIDIA=m

    #
    # Display device support
    #
    CONFIG_DISPLAY_SUPPORT=m

    #
    # Display hardware drivers
    #

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    CONFIG_VGACON_SOFT_SCROLLBACK=y
    CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
    CONFIG_VIDEO_SELECT=y
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
    CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
    # CONFIG_FONTS is not set
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y
    # CONFIG_LOGO is not set

    #
    # Bootsplash configuration
    #
    CONFIG_SOUND=m
    CONFIG_SND=m
    CONFIG_SND_TIMER=m
    CONFIG_SND_PCM=m
    CONFIG_SND_HWDEP=m
    CONFIG_SND_RAWMIDI=m
    CONFIG_SND_SEQUENCER=m
    CONFIG_SND_SEQ_DUMMY=m
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_PCM_OSS_PLUGINS=y
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_DYNAMIC_MINORS=y
    CONFIG_SND_SUPPORT_OLD_API=y
    CONFIG_SND_VERBOSE_PROCFS=y
    CONFIG_SND_VERBOSE_PRINTK=y
    CONFIG_SND_DEBUG=y
    # CONFIG_SND_DEBUG_VERBOSE is not set
    # CONFIG_SND_PCM_XRUN_DEBUG is not set
    CONFIG_SND_VMASTER=y
    CONFIG_SND_MPU401_UART=m
    CONFIG_SND_OPL3_LIB=m
    CONFIG_SND_VX_LIB=m
    CONFIG_SND_AC97_CODEC=m
    CONFIG_SND_DRIVERS=y
    # CONFIG_SND_PCSP is not set
    CONFIG_SND_DUMMY=m
    CONFIG_SND_VIRMIDI=m
    CONFIG_SND_MTPAV=m
    CONFIG_SND_MTS64=m
    CONFIG_SND_SERIAL_U16550=m
    CONFIG_SND_MPU401=m
    CONFIG_SND_PORTMAN2X4=m
    CONFIG_SND_AC97_POWER_SAVE=y
    CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
    CONFIG_SND_SB_COMMON=m
    CONFIG_SND_SB16_DSP=m
    CONFIG_SND_PCI=y
    CONFIG_SND_AD1889=m
    CONFIG_SND_ALS300=m
    CONFIG_SND_ALS4000=m
    CONFIG_SND_ALI5451=m
    CONFIG_SND_ATIIXP=m
    CONFIG_SND_ATIIXP_MODEM=m
    CONFIG_SND_AU8810=m
    CONFIG_SND_AU8820=m
    CONFIG_SND_AU8830=m
    CONFIG_SND_AW2=m
    CONFIG_SND_AZT3328=m
    CONFIG_SND_BT87X=m
    # CONFIG_SND_BT87X_OVERCLOCK is not set
    CONFIG_SND_CA0106=m
    CONFIG_SND_CMIPCI=m
    CONFIG_SND_OXYGEN_LIB=m
    CONFIG_SND_OXYGEN=m
    CONFIG_SND_CS4281=m
    CONFIG_SND_CS46XX=m
    CONFIG_SND_CS46XX_NEW_DSP=y
    CONFIG_SND_CS5530=m
    CONFIG_SND_DARLA20=m
    CONFIG_SND_GINA20=m
    CONFIG_SND_LAYLA20=m
    CONFIG_SND_DARLA24=m
    CONFIG_SND_GINA24=m
    CONFIG_SND_LAYLA24=m
    CONFIG_SND_MONA=m
    CONFIG_SND_MIA=m
    CONFIG_SND_ECHO3G=m
    CONFIG_SND_INDIGO=m
    CONFIG_SND_INDIGOIO=m
    CONFIG_SND_INDIGODJ=m
    CONFIG_SND_EMU10K1=m
    CONFIG_SND_EMU10K1X=m
    CONFIG_SND_ENS1370=m
    CONFIG_SND_ENS1371=m
    CONFIG_SND_ES1938=m
    CONFIG_SND_ES1968=m
    CONFIG_SND_FM801=m
    CONFIG_SND_HDA_INTEL=m
    # CONFIG_SND_HDA_HWDEP is not set
    CONFIG_SND_HDA_CODEC_REALTEK=y
    CONFIG_SND_HDA_CODEC_ANALOG=y
    CONFIG_SND_HDA_CODEC_SIGMATEL=y
    CONFIG_SND_HDA_CODEC_VIA=y
    CONFIG_SND_HDA_CODEC_ATIHDMI=y
    CONFIG_SND_HDA_CODEC_CONEXANT=y
    CONFIG_SND_HDA_CODEC_CMEDIA=y
    CONFIG_SND_HDA_CODEC_SI3054=y
    CONFIG_SND_HDA_GENERIC=y
    CONFIG_SND_HDA_POWER_SAVE=y
    CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
    CONFIG_SND_HDSP=m
    CONFIG_SND_HDSPM=m
    CONFIG_SND_HIFIER=m
    CONFIG_SND_ICE1712=m
    CONFIG_SND_ICE1724=m
    CONFIG_SND_INTEL8X0=m
    CONFIG_SND_INTEL8X0M=m
    CONFIG_SND_KORG1212=m
    CONFIG_SND_MAESTRO3=m
    CONFIG_SND_MIXART=m
    CONFIG_SND_NM256=m
    CONFIG_SND_PCXHR=m
    CONFIG_SND_RIPTIDE=m
    CONFIG_SND_RME32=m
    CONFIG_SND_RME96=m
    CONFIG_SND_RME9652=m
    CONFIG_SND_SONICVIBES=m
    CONFIG_SND_TRIDENT=m
    CONFIG_SND_VIA82XX=m
    CONFIG_SND_VIA82XX_MODEM=m
    CONFIG_SND_VIRTUOSO=m
    CONFIG_SND_VX222=m
    CONFIG_SND_YMFPCI=m
    CONFIG_SND_SPI=y
    CONFIG_SND_USB=y
    CONFIG_SND_USB_AUDIO=m
    CONFIG_SND_USB_USX2Y=m
    CONFIG_SND_USB_CAIAQ=m
    CONFIG_SND_USB_CAIAQ_INPUT=y
    CONFIG_SND_PCMCIA=y
    CONFIG_SND_VXPOCKET=m
    CONFIG_SND_PDAUDIOCF=m
    # CONFIG_SND_SOC is not set
    CONFIG_SOUND_PRIME=m
    CONFIG_SOUND_TRIDENT=m
    CONFIG_SOUND_OSS=m
    CONFIG_SOUND_TRACEINIT=y
    CONFIG_SOUND_DMAP=y
    CONFIG_SOUND_SSCAPE=m
    CONFIG_SOUND_VMIDI=m
    CONFIG_SOUND_TRIX=m
    CONFIG_SOUND_MSS=m
    CONFIG_SOUND_MPU401=m
    CONFIG_SOUND_PAS=m
    CONFIG_SOUND_PSS=m
    CONFIG_PSS_MIXER=y
    # CONFIG_PSS_HAVE_BOOT is not set
    # CONFIG_SOUND_SB is not set
    CONFIG_SOUND_YM3812=m
    CONFIG_SOUND_UART6850=m
    CONFIG_SOUND_AEDSP16=m
    CONFIG_SC6600=y
    CONFIG_SC6600_JOY=y
    CONFIG_SC6600_CDROM=4
    CONFIG_SC6600_CDROMBASE=0x0
    CONFIG_AEDSP16_MSS=y
    # CONFIG_AEDSP16_SBPRO is not set
    CONFIG_AC97_BUS=m
    CONFIG_HID_SUPPORT=y
    CONFIG_HID=m
    # CONFIG_HID_DEBUG is not set
    CONFIG_HIDRAW=y

    #
    # USB Input Devices
    #
    CONFIG_USB_HID=m
    CONFIG_USB_HIDINPUT_POWERBOOK=y
    CONFIG_HID_FF=y
    CONFIG_HID_PID=y
    CONFIG_LOGITECH_FF=y
    # CONFIG_LOGIRUMBLEPAD2_FF is not set
    CONFIG_PANTHERLORD_FF=y
    CONFIG_THRUSTMASTER_FF=y
    CONFIG_ZEROPLUS_FF=y
    CONFIG_USB_HIDDEV=y

    #
    # USB HID Boot Protocol drivers
    #
    # CONFIG_USB_KBD is not set
    # CONFIG_USB_MOUSE is not set
    CONFIG_USB_SUPPORT=y
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB_ARCH_HAS_EHCI=y
    CONFIG_USB=m
    # CONFIG_USB_DEBUG is not set
    CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_DEVICE_CLASS is not set
    # CONFIG_USB_DYNAMIC_MINORS is not set
    CONFIG_USB_SUSPEND=y
    # CONFIG_USB_OTG is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_C67X00_HCD=m
    CONFIG_USB_EHCI_HCD=m
    CONFIG_USB_EHCI_ROOT_HUB_TT=y
    CONFIG_USB_EHCI_TT_NEWSCHED=y
    CONFIG_USB_ISP116X_HCD=m
    CONFIG_USB_ISP1760_HCD=m
    CONFIG_USB_ISP1760_PCI=y
    CONFIG_USB_OHCI_HCD=m
    # CONFIG_USB_OHCI_HCD_SSB is not set
    # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
    # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
    CONFIG_USB_OHCI_LITTLE_ENDIAN=y
    CONFIG_USB_UHCI_HCD=m
    # CONFIG_USB_U132_HCD is not set
    CONFIG_USB_SL811_HCD=m
    CONFIG_USB_SL811_CS=m
    CONFIG_USB_R8A66597_HCD=m

    #
    # USB Device Class drivers
    #
    CONFIG_USB_ACM=m
    CONFIG_USB_PRINTER=m
    CONFIG_USB_WDM=m

    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    #

    #
    # may also be needed; see USB_STORAGE Help for more information
    #
    CONFIG_USB_STORAGE=m
    # CONFIG_USB_STORAGE_DEBUG is not set
    CONFIG_USB_STORAGE_DATAFAB=y
    CONFIG_USB_STORAGE_FREECOM=y
    CONFIG_USB_STORAGE_ISD200=y
    CONFIG_USB_STORAGE_DPCM=y
    CONFIG_USB_STORAGE_USBAT=y
    CONFIG_USB_STORAGE_SDDR09=y
    CONFIG_USB_STORAGE_SDDR55=y
    CONFIG_USB_STORAGE_JUMPSHOT=y
    CONFIG_USB_STORAGE_ALAUDA=y
    CONFIG_USB_STORAGE_ONETOUCH=y
    CONFIG_USB_STORAGE_KARMA=y
    CONFIG_USB_STORAGE_CYPRESS_ATACB=y
    # CONFIG_USB_LIBUSUAL is not set

    #
    # USB Imaging devices
    #
    CONFIG_USB_MDC800=m
    CONFIG_USB_MICROTEK=m
    CONFIG_USB_MON=y

    #
    # USB port drivers
    #
    CONFIG_USB_USS720=m
    CONFIG_USB_SERIAL=m
    CONFIG_USB_EZUSB=y
    CONFIG_USB_SERIAL_GENERIC=y
    CONFIG_USB_SERIAL_AIRCABLE=m
    CONFIG_USB_SERIAL_ARK3116=m
    CONFIG_USB_SERIAL_BELKIN=m
    CONFIG_USB_SERIAL_CH341=m
    CONFIG_USB_SERIAL_WHITEHEAT=m
    CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
    CONFIG_USB_SERIAL_CP2101=m
    CONFIG_USB_SERIAL_CYPRESS_M8=m
    CONFIG_USB_SERIAL_EMPEG=m
    CONFIG_USB_SERIAL_FTDI_SIO=m
    CONFIG_USB_SERIAL_FUNSOFT=m
    CONFIG_USB_SERIAL_VISOR=m
    CONFIG_USB_SERIAL_IPAQ=m
    CONFIG_USB_SERIAL_IR=m
    CONFIG_USB_SERIAL_EDGEPORT=m
    CONFIG_USB_SERIAL_EDGEPORT_TI=m
    CONFIG_USB_SERIAL_GARMIN=m
    CONFIG_USB_SERIAL_IPW=m
    CONFIG_USB_SERIAL_IUU=m
    CONFIG_USB_SERIAL_KEYSPAN_PDA=m
    CONFIG_USB_SERIAL_KEYSPAN=m
    CONFIG_USB_SERIAL_KEYSPAN_MPR=y
    CONFIG_USB_SERIAL_KEYSPAN_USA28=y
    CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
    CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
    CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
    CONFIG_USB_SERIAL_KEYSPAN_USA19=y
    CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
    CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
    CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
    CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
    CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
    CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
    CONFIG_USB_SERIAL_KLSI=m
    CONFIG_USB_SERIAL_KOBIL_SCT=m
    CONFIG_USB_SERIAL_MCT_U232=m
    CONFIG_USB_SERIAL_MOS7720=m
    CONFIG_USB_SERIAL_MOS7840=m
    CONFIG_USB_SERIAL_MOTOROLA=m
    CONFIG_USB_SERIAL_NAVMAN=m
    CONFIG_USB_SERIAL_PL2303=m
    CONFIG_USB_SERIAL_OTI6858=m
    CONFIG_USB_SERIAL_SPCP8X5=m
    CONFIG_USB_SERIAL_HP4X=m
    CONFIG_USB_SERIAL_SAFE=m
    CONFIG_USB_SERIAL_SAFE_PADDED=y
    CONFIG_USB_SERIAL_SIERRAWIRELESS=m
    CONFIG_USB_SERIAL_TI=m
    CONFIG_USB_SERIAL_TI_FIRMWARE=y
    CONFIG_USB_SERIAL_CYBERJACK=m
    CONFIG_USB_SERIAL_XIRCOM=m
    CONFIG_USB_SERIAL_OPTION=m
    CONFIG_USB_SERIAL_OMNINET=m
    CONFIG_USB_SERIAL_DEBUG=m

    #
    # USB Miscellaneous drivers
    #
    CONFIG_USB_EMI62=m
    CONFIG_USB_EMI26=m
    CONFIG_USB_ADUTUX=m
    CONFIG_USB_AUERSWALD=m
    CONFIG_USB_RIO500=m
    CONFIG_USB_LEGOTOWER=m
    CONFIG_USB_LCD=m
    CONFIG_USB_BERRY_CHARGE=m
    CONFIG_USB_LED=m
    CONFIG_USB_CYPRESS_CY7C63=m
    CONFIG_USB_CYTHERM=m
    CONFIG_USB_PHIDGET=m
    CONFIG_USB_PHIDGETKIT=m
    CONFIG_USB_PHIDGETMOTORCONTROL=m
    CONFIG_USB_PHIDGETSERVO=m
    CONFIG_USB_IDMOUSE=m
    CONFIG_USB_FTDI_ELAN=m
    CONFIG_USB_APPLEDISPLAY=m
    CONFIG_USB_SISUSBVGA=m
    CONFIG_USB_SISUSBVGA_CON=y
    CONFIG_USB_LD=m
    CONFIG_USB_TRANCEVIBRATOR=m
    CONFIG_USB_IOWARRIOR=m
    # CONFIG_USB_TEST is not set
    CONFIG_USB_ISIGHTFW=m
    CONFIG_USB_GOTEMP=m
    CONFIG_USB_ATM=m
    CONFIG_USB_SPEEDTOUCH=m
    CONFIG_USB_CXACRU=m
    CONFIG_USB_UEAGLEATM=m
    CONFIG_USB_XUSBATM=m
    # CONFIG_USB_GADGET is not set
    CONFIG_MMC=m
    # CONFIG_MMC_DEBUG is not set
    # CONFIG_MMC_UNSAFE_RESUME is not set

    #
    # MMC/SD Card Drivers
    #
    CONFIG_MMC_BLOCK=m
    CONFIG_MMC_BLOCK_BOUNCE=y
    CONFIG_SDIO_UART=m
    CONFIG_MMC_TEST=m

    #
    # MMC/SD Host Controller Drivers
    #
    CONFIG_MMC_SDHCI=m
    CONFIG_MMC_SDHCI_PCI=m
    CONFIG_MMC_RICOH_MMC=m
    CONFIG_MMC_WBSD=m
    CONFIG_MMC_TIFM_SD=m
    CONFIG_MMC_SPI=m
    CONFIG_MMC_SDRICOH_CS=m
    CONFIG_MEMSTICK=m
    # CONFIG_MEMSTICK_DEBUG is not set

    #
    # MemoryStick drivers
    #
    # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
    CONFIG_MSPRO_BLOCK=m

    #
    # MemoryStick Host Controller Drivers
    #
    CONFIG_MEMSTICK_TIFM_MS=m
    CONFIG_MEMSTICK_JMICRON_38X=m
    CONFIG_NEW_LEDS=y
    CONFIG_LEDS_CLASS=m

    #
    # LED drivers
    #
    CONFIG_LEDS_PCA9532=m
    CONFIG_LEDS_CLEVO_MAIL=m

    #
    # LED Triggers
    #
    CONFIG_LEDS_TRIGGERS=y
    CONFIG_LEDS_TRIGGER_TIMER=m
    CONFIG_LEDS_TRIGGER_IDE_DISK=y
    CONFIG_LEDS_TRIGGER_HEARTBEAT=m
    CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
    # CONFIG_ACCESSIBILITY is not set
    CONFIG_INFINIBAND=m
    CONFIG_INFINIBAND_USER_MAD=m
    CONFIG_INFINIBAND_USER_ACCESS=m
    CONFIG_INFINIBAND_USER_MEM=y
    CONFIG_INFINIBAND_ADDR_TRANS=y
    CONFIG_INFINIBAND_MTHCA=m
    CONFIG_INFINIBAND_MTHCA_DEBUG=y
    CONFIG_INFINIBAND_IPATH=m
    CONFIG_INFINIBAND_AMSO1100=m
    # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
    CONFIG_INFINIBAND_CXGB3=m
    # CONFIG_INFINIBAND_CXGB3_DEBUG is not set
    CONFIG_MLX4_INFINIBAND=m
    CONFIG_INFINIBAND_NES=m
    # CONFIG_INFINIBAND_NES_DEBUG is not set
    CONFIG_INFINIBAND_IPOIB=m
    CONFIG_INFINIBAND_IPOIB_CM=y
    CONFIG_INFINIBAND_IPOIB_DEBUG=y
    # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
    CONFIG_INFINIBAND_SRP=m
    CONFIG_INFINIBAND_ISER=m
    CONFIG_EDAC=y

    #
    # Reporting subsystems
    #
    # CONFIG_EDAC_DEBUG is not set
    CONFIG_EDAC_MM_EDAC=m
    CONFIG_EDAC_E752X=m
    CONFIG_EDAC_I82975X=m
    CONFIG_EDAC_I3000=m
    CONFIG_EDAC_I5000=m
    CONFIG_RTC_LIB=m
    CONFIG_RTC_CLASS=m

    #
    # RTC interfaces
    #
    CONFIG_RTC_INTF_SYSFS=y
    CONFIG_RTC_INTF_PROC=y
    CONFIG_RTC_INTF_DEV=y
    CONFIG_RTC_INTF_DEV_UIE_EMUL=y
    CONFIG_RTC_DRV_TEST=m

    #
    # I2C RTC drivers
    #
    CONFIG_RTC_DRV_DS1307=m
    CONFIG_RTC_DRV_DS1374=m
    CONFIG_RTC_DRV_DS1672=m
    CONFIG_RTC_DRV_MAX6900=m
    CONFIG_RTC_DRV_RS5C372=m
    CONFIG_RTC_DRV_ISL1208=m
    CONFIG_RTC_DRV_X1205=m
    CONFIG_RTC_DRV_PCF8563=m
    CONFIG_RTC_DRV_PCF8583=m
    CONFIG_RTC_DRV_M41T80=m
    CONFIG_RTC_DRV_M41T80_WDT=y
    CONFIG_RTC_DRV_S35390A=m
    CONFIG_RTC_DRV_FM3130=m

    #
    # SPI RTC drivers
    #
    CONFIG_RTC_DRV_MAX6902=m
    CONFIG_RTC_DRV_R9701=m
    CONFIG_RTC_DRV_RS5C348=m

    #
    # Platform RTC drivers
    #
    CONFIG_RTC_DRV_CMOS=m
    CONFIG_RTC_DRV_DS1511=m
    CONFIG_RTC_DRV_DS1553=m
    CONFIG_RTC_DRV_DS1742=m
    CONFIG_RTC_DRV_STK17TA8=m
    CONFIG_RTC_DRV_M48T86=m
    CONFIG_RTC_DRV_M48T59=m
    CONFIG_RTC_DRV_V3020=m

    #
    # on-CPU RTC drivers
    #
    CONFIG_DMADEVICES=y

    #
    # DMA Devices
    #
    CONFIG_INTEL_IOATDMA=m
    CONFIG_DMA_ENGINE=y

    #
    # DMA Clients
    #
    CONFIG_NET_DMA=y
    CONFIG_DMATEST=m
    CONFIG_DCA=m
    CONFIG_AUXDISPLAY=y
    # CONFIG_KS0108 is not set
    CONFIG_UIO=m
    CONFIG_UIO_CIF=m
    CONFIG_UIO_PDRV=m
    CONFIG_UIO_SMX=m

    #
    # Firmware Drivers
    #
    CONFIG_EDD=m
    # CONFIG_EDD_OFF is not set
    CONFIG_FIRMWARE_MEMMAP=y
    CONFIG_EFI_VARS=m
    CONFIG_DELL_RBU=m
    CONFIG_DCDBAS=m
    CONFIG_DMIID=y
    CONFIG_ISCSI_IBFT_FIND=y
    CONFIG_ISCSI_IBFT=m

    #
    # File systems
    #
    CONFIG_EXT2_FS=m
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    # CONFIG_EXT2_FS_XIP is not set
    CONFIG_EXT3_FS=m
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_EXT4DEV_FS=m
    CONFIG_EXT4DEV_FS_XATTR=y
    CONFIG_EXT4DEV_FS_POSIX_ACL=y
    CONFIG_EXT4DEV_FS_SECURITY=y
    CONFIG_JBD=m
    CONFIG_JBD_DEBUG=y
    CONFIG_JBD2=m
    CONFIG_JBD2_DEBUG=y
    CONFIG_FS_MBCACHE=m
    CONFIG_REISERFS_FS=m
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    CONFIG_REISERFS_FS_XATTR=y
    CONFIG_REISERFS_FS_POSIX_ACL=y
    CONFIG_REISERFS_FS_SECURITY=y
    CONFIG_JFS_FS=m
    CONFIG_JFS_POSIX_ACL=y
    CONFIG_JFS_SECURITY=y
    # CONFIG_JFS_DEBUG is not set
    CONFIG_JFS_STATISTICS=y
    CONFIG_FS_POSIX_ACL=y
    CONFIG_XFS_FS=m
    CONFIG_XFS_QUOTA=y
    CONFIG_XFS_POSIX_ACL=y
    CONFIG_XFS_RT=y
    # CONFIG_XFS_DEBUG is not set
    CONFIG_GFS2_FS=m
    CONFIG_GFS2_FS_LOCKING_DLM=m
    CONFIG_OCFS2_FS=m
    CONFIG_OCFS2_FS_O2CB=m
    CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
    CONFIG_OCFS2_FS_STATS=y
    # CONFIG_OCFS2_DEBUG_MASKLOG is not set
    # CONFIG_OCFS2_DEBUG_FS is not set
    CONFIG_DNOTIFY=y
    CONFIG_INOTIFY=y
    CONFIG_INOTIFY_USER=y
    CONFIG_QUOTA=y
    CONFIG_QUOTA_NETLINK_INTERFACE=y
    CONFIG_PRINT_QUOTA_WARNING=y
    CONFIG_QFMT_V1=m
    CONFIG_QFMT_V2=m
    CONFIG_QUOTACTL=y
    CONFIG_AUTOFS_FS=m
    CONFIG_AUTOFS4_FS=m
    CONFIG_FUSE_FS=m
    CONFIG_GENERIC_ACL=y

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_UDF_FS=m
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=m
    # CONFIG_NTFS_DEBUG is not set
    CONFIG_NTFS_RW=y

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_PROC_VMCORE=y
    CONFIG_PROC_SYSCTL=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    CONFIG_TMPFS_POSIX_ACL=y
    CONFIG_HUGETLBFS=y
    CONFIG_HUGETLB_PAGE=y
    CONFIG_CONFIGFS_FS=m

    #
    # Miscellaneous filesystems
    #
    CONFIG_ADFS_FS=m
    # CONFIG_ADFS_FS_RW is not set
    CONFIG_AFFS_FS=m
    CONFIG_ECRYPT_FS=m
    CONFIG_HFS_FS=m
    CONFIG_HFSPLUS_FS=m
    CONFIG_BEFS_FS=m
    # CONFIG_BEFS_DEBUG is not set
    CONFIG_BFS_FS=m
    CONFIG_EFS_FS=m
    CONFIG_JFFS2_FS=m
    CONFIG_JFFS2_FS_DEBUG=0
    CONFIG_JFFS2_FS_WRITEBUFFER=y
    # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
    CONFIG_JFFS2_SUMMARY=y
    CONFIG_JFFS2_FS_XATTR=y
    CONFIG_JFFS2_FS_POSIX_ACL=y
    CONFIG_JFFS2_FS_SECURITY=y
    CONFIG_JFFS2_COMPRESSION_OPTIONS=y
    CONFIG_JFFS2_ZLIB=y
    # CONFIG_JFFS2_LZO is not set
    CONFIG_JFFS2_RTIME=y
    # CONFIG_JFFS2_RUBIN is not set
    # CONFIG_JFFS2_CMODE_NONE is not set
    CONFIG_JFFS2_CMODE_PRIORITY=y
    # CONFIG_JFFS2_CMODE_SIZE is not set
    # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
    CONFIG_UBIFS_FS=m
    CONFIG_UBIFS_FS_XATTR=y
    CONFIG_UBIFS_FS_ADVANCED_COMPR=y
    CONFIG_UBIFS_FS_LZO=y
    CONFIG_UBIFS_FS_ZLIB=y
    # CONFIG_UBIFS_FS_DEBUG is not set
    CONFIG_CRAMFS=m
    CONFIG_VXFS_FS=m
    CONFIG_MINIX_FS=y
    CONFIG_HPFS_FS=m
    CONFIG_QNX4FS_FS=m
    CONFIG_ROMFS_FS=m
    CONFIG_SYSV_FS=m
    CONFIG_UFS_FS=m
    CONFIG_UFS_FS_WRITE=y
    # CONFIG_UFS_DEBUG is not set
    CONFIG_NETWORK_FILESYSTEMS=y
    CONFIG_NFS_FS=m
    CONFIG_NFS_V3=y
    CONFIG_NFS_V3_ACL=y
    CONFIG_NFS_V4=y
    CONFIG_NFSD=m
    CONFIG_NFSD_V2_ACL=y
    CONFIG_NFSD_V3=y
    CONFIG_NFSD_V3_ACL=y
    CONFIG_NFSD_V4=y
    CONFIG_LOCKD=m
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=m
    CONFIG_NFS_ACL_SUPPORT=m
    CONFIG_NFS_COMMON=y
    CONFIG_SUNRPC=m
    CONFIG_SUNRPC_GSS=m
    CONFIG_SUNRPC_XPRT_RDMA=m
    CONFIG_RPCSEC_GSS_KRB5=m
    CONFIG_RPCSEC_GSS_SPKM3=m
    # CONFIG_SMB_FS is not set
    CONFIG_CIFS=m
    CONFIG_CIFS_STATS=y
    CONFIG_CIFS_STATS2=y
    CONFIG_CIFS_WEAK_PW_HASH=y
    CONFIG_CIFS_XATTR=y
    CONFIG_CIFS_POSIX=y
    # CONFIG_CIFS_DEBUG2 is not set
    # CONFIG_CIFS_EXPERIMENTAL is not set
    CONFIG_NCP_FS=m
    CONFIG_NCPFS_PACKET_SIGNING=y
    CONFIG_NCPFS_IOCTL_LOCKING=y
    CONFIG_NCPFS_STRONG=y
    CONFIG_NCPFS_NFS_NS=y
    CONFIG_NCPFS_OS2_NS=y
    CONFIG_NCPFS_SMALLDOS=y
    CONFIG_NCPFS_NLS=y
    CONFIG_NCPFS_EXTRAS=y
    CONFIG_CODA_FS=m
    # CONFIG_CODA_FS_OLD_API is not set
    CONFIG_AFS_FS=m
    # CONFIG_AFS_DEBUG is not set
    CONFIG_9P_FS=m

    #
    # Partition Types
    #
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    CONFIG_OSF_PARTITION=y
    # CONFIG_AMIGA_PARTITION is not set
    CONFIG_ATARI_PARTITION=y
    CONFIG_MAC_PARTITION=y
    CONFIG_MSDOS_PARTITION=y
    CONFIG_BSD_DISKLABEL=y
    # CONFIG_MINIX_SUBPARTITION is not set
    CONFIG_SOLARIS_X86_PARTITION=y
    CONFIG_UNIXWARE_DISKLABEL=y
    CONFIG_LDM_PARTITION=y
    # CONFIG_LDM_DEBUG is not set
    CONFIG_SGI_PARTITION=y
    CONFIG_ULTRIX_PARTITION=y
    CONFIG_SUN_PARTITION=y
    CONFIG_KARMA_PARTITION=y
    CONFIG_EFI_PARTITION=y
    CONFIG_SYSV68_PARTITION=y
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="utf8"
    CONFIG_NLS_CODEPAGE_437=m
    CONFIG_NLS_CODEPAGE_737=m
    CONFIG_NLS_CODEPAGE_775=m
    CONFIG_NLS_CODEPAGE_850=m
    CONFIG_NLS_CODEPAGE_852=m
    CONFIG_NLS_CODEPAGE_855=m
    CONFIG_NLS_CODEPAGE_857=m
    CONFIG_NLS_CODEPAGE_860=m
    CONFIG_NLS_CODEPAGE_861=m
    CONFIG_NLS_CODEPAGE_862=m
    CONFIG_NLS_CODEPAGE_863=m
    CONFIG_NLS_CODEPAGE_864=m
    CONFIG_NLS_CODEPAGE_865=m
    CONFIG_NLS_CODEPAGE_866=m
    CONFIG_NLS_CODEPAGE_869=m
    CONFIG_NLS_CODEPAGE_936=m
    CONFIG_NLS_CODEPAGE_950=m
    CONFIG_NLS_CODEPAGE_932=m
    CONFIG_NLS_CODEPAGE_949=m
    CONFIG_NLS_CODEPAGE_874=m
    CONFIG_NLS_ISO8859_8=m
    CONFIG_NLS_CODEPAGE_1250=m
    CONFIG_NLS_CODEPAGE_1251=m
    CONFIG_NLS_ASCII=m
    CONFIG_NLS_ISO8859_1=m
    CONFIG_NLS_ISO8859_2=m
    CONFIG_NLS_ISO8859_3=m
    CONFIG_NLS_ISO8859_4=m
    CONFIG_NLS_ISO8859_5=m
    CONFIG_NLS_ISO8859_6=m
    CONFIG_NLS_ISO8859_7=m
    CONFIG_NLS_ISO8859_9=m
    CONFIG_NLS_ISO8859_13=m
    CONFIG_NLS_ISO8859_14=m
    CONFIG_NLS_ISO8859_15=m
    CONFIG_NLS_KOI8_R=m
    CONFIG_NLS_KOI8_U=m
    CONFIG_NLS_UTF8=m
    CONFIG_DLM=m
    # CONFIG_DLM_DEBUG is not set

    #
    # Kernel hacking
    #
    CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    # CONFIG_PRINTK_TIME is not set
    CONFIG_ENABLE_WARN_DEPRECATED=y
    # CONFIG_ENABLE_MUST_CHECK is not set
    CONFIG_FRAME_WARN=1024
    CONFIG_MAGIC_SYSRQ=y
    CONFIG_UNUSED_SYMBOLS=y
    CONFIG_DEBUG_FS=y
    # CONFIG_HEADERS_CHECK is not set
    CONFIG_DEBUG_KERNEL=y
    # CONFIG_DEBUG_SHIRQ is not set
    # CONFIG_DETECT_SOFTLOCKUP is not set
    CONFIG_SCHED_DEBUG=y
    CONFIG_SCHEDSTATS=y
    CONFIG_TIMER_STATS=y
    # CONFIG_DEBUG_OBJECTS is not set
    # CONFIG_SLUB_DEBUG_ON is not set
    # CONFIG_SLUB_STATS is not set
    # CONFIG_DEBUG_RT_MUTEXES is not set
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_MUTEXES is not set
    # CONFIG_DEBUG_LOCK_ALLOC is not set
    # CONFIG_PROVE_LOCKING is not set
    # CONFIG_LOCK_STAT is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    CONFIG_STACKTRACE=y
    # CONFIG_DEBUG_KOBJECT is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    # CONFIG_DEBUG_INFO is not set
    # CONFIG_DEBUG_VM is not set
    # CONFIG_DEBUG_WRITECOUNT is not set
    # CONFIG_DEBUG_LIST is not set
    # CONFIG_DEBUG_SG is not set
    CONFIG_FRAME_POINTER=y
    # CONFIG_BOOT_PRINTK_DELAY is not set
    # CONFIG_FAULT_INJECTION is not set
    CONFIG_LATENCYTOP=y
    CONFIG_HAVE_FTRACE=y
    CONFIG_HAVE_DYNAMIC_FTRACE=y
    CONFIG_TRACING=y
    # CONFIG_FTRACE is not set
    # CONFIG_IRQSOFF_TRACER is not set
    # CONFIG_SYSPROF_TRACER is not set
    # CONFIG_SCHED_TRACER is not set
    # CONFIG_CONTEXT_SWITCH_TRACER is not set
    # CONFIG_FTRACE_STARTUP_TEST is not set
    CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
    # CONFIG_SAMPLES is not set
    CONFIG_HAVE_ARCH_KGDB=y
    # CONFIG_KGDB is not set
    # CONFIG_KERNEL_TESTS is not set
    CONFIG_NONPROMISC_DEVMEM=y
    CONFIG_X86_VERBOSE_BOOTUP=y
    CONFIG_EARLY_PRINTK=y
    # CONFIG_DEBUG_STACKOVERFLOW is not set
    # CONFIG_DEBUG_STACK_USAGE is not set
    # CONFIG_DEBUG_PAGEALLOC is not set
    # CONFIG_DEBUG_PER_CPU_MAPS is not set
    # CONFIG_X86_PTDUMP is not set
    CONFIG_DEBUG_RODATA=y
    # CONFIG_DIRECT_GBPAGES is not set
    # CONFIG_DEBUG_RODATA_TEST is not set
    # CONFIG_DEBUG_NX_TEST is not set
    # CONFIG_IOMMU_DEBUG is not set
    CONFIG_MMIOTRACE_HOOKS=y
    CONFIG_MMIOTRACE=y
    # CONFIG_MMIOTRACE_TEST is not set
    CONFIG_IO_DELAY_TYPE_0X80=0
    CONFIG_IO_DELAY_TYPE_0XED=1
    CONFIG_IO_DELAY_TYPE_UDELAY=2
    CONFIG_IO_DELAY_TYPE_NONE=3
    CONFIG_IO_DELAY_0X80=y
    # CONFIG_IO_DELAY_0XED is not set
    # CONFIG_IO_DELAY_UDELAY is not set
    # CONFIG_IO_DELAY_NONE is not set
    CONFIG_DEFAULT_IO_DELAY_TYPE=0
    # CONFIG_DEBUG_BOOT_PARAMS is not set
    # CONFIG_CPA_DEBUG is not set

    #
    # Security options
    #
    CONFIG_KEYS=y
    CONFIG_KEYS_DEBUG_PROC_KEYS=y
    CONFIG_SECURITY=y
    CONFIG_SECURITY_NETWORK=y
    # CONFIG_SECURITY_NETWORK_XFRM is not set
    CONFIG_SECURITY_FILE_CAPABILITIES=y
    CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
    # CONFIG_SECURITY_SELINUX is not set
    CONFIG_XOR_BLOCKS=m
    CONFIG_ASYNC_CORE=m
    CONFIG_ASYNC_MEMCPY=m
    CONFIG_ASYNC_XOR=m
    CONFIG_CRYPTO=y

    #
    # Crypto core or helper
    #
    CONFIG_CRYPTO_ALGAPI=y
    CONFIG_CRYPTO_AEAD=m
    CONFIG_CRYPTO_BLKCIPHER=m
    CONFIG_CRYPTO_HASH=y
    CONFIG_CRYPTO_MANAGER=y
    CONFIG_CRYPTO_GF128MUL=m
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_CRYPTD=m
    CONFIG_CRYPTO_AUTHENC=m
    CONFIG_CRYPTO_TEST=m

    #
    # Authenticated Encryption with Associated Data
    #
    CONFIG_CRYPTO_CCM=m
    CONFIG_CRYPTO_GCM=m
    CONFIG_CRYPTO_SEQIV=m

    #
    # Block modes
    #
    CONFIG_CRYPTO_CBC=m
    CONFIG_CRYPTO_CTR=m
    CONFIG_CRYPTO_CTS=m
    CONFIG_CRYPTO_ECB=m
    CONFIG_CRYPTO_LRW=m
    CONFIG_CRYPTO_PCBC=m
    CONFIG_CRYPTO_XTS=m

    #
    # Hash modes
    #
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_XCBC=m

    #
    # Digest
    #
    CONFIG_CRYPTO_CRC32C=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=m
    CONFIG_CRYPTO_MICHAEL_MIC=m
    CONFIG_CRYPTO_RMD128=m
    CONFIG_CRYPTO_RMD160=m
    CONFIG_CRYPTO_RMD256=m
    CONFIG_CRYPTO_RMD320=m
    CONFIG_CRYPTO_SHA1=m
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_TGR192=m
    CONFIG_CRYPTO_WP512=m

    #
    # Ciphers
    #
    CONFIG_CRYPTO_AES=m
    CONFIG_CRYPTO_AES_X86_64=m
    CONFIG_CRYPTO_ANUBIS=m
    CONFIG_CRYPTO_ARC4=m
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_CAMELLIA=m
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    CONFIG_CRYPTO_DES=m
    CONFIG_CRYPTO_FCRYPT=m
    CONFIG_CRYPTO_KHAZAD=m
    CONFIG_CRYPTO_SALSA20=m
    CONFIG_CRYPTO_SALSA20_X86_64=m
    CONFIG_CRYPTO_SEED=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_TEA=m
    # CONFIG_CRYPTO_TWOFISH is not set
    CONFIG_CRYPTO_TWOFISH_COMMON=m
    CONFIG_CRYPTO_TWOFISH_X86_64=m

    #
    # Compression
    #
    CONFIG_CRYPTO_DEFLATE=m
    CONFIG_CRYPTO_LZO=m
    CONFIG_CRYPTO_HW=y
    CONFIG_CRYPTO_DEV_HIFN_795X=m
    CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
    CONFIG_HAVE_KVM=y
    CONFIG_VIRTUALIZATION=y
    CONFIG_KVM=m
    CONFIG_KVM_INTEL=m
    CONFIG_KVM_AMD=m
    CONFIG_VIRTIO=m
    CONFIG_VIRTIO_RING=m
    CONFIG_VIRTIO_PCI=m
    CONFIG_VIRTIO_BALLOON=m

    #
    # Library routines
    #
    CONFIG_BITREVERSE=y
    CONFIG_GENERIC_FIND_FIRST_BIT=y
    CONFIG_GENERIC_FIND_NEXT_BIT=y
    CONFIG_CRC_CCITT=m
    CONFIG_CRC16=m
    CONFIG_CRC_T10DIF=m
    CONFIG_CRC_ITU_T=m
    CONFIG_CRC32=y
    CONFIG_CRC7=m
    CONFIG_LIBCRC32C=m
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_LZO_COMPRESS=m
    CONFIG_LZO_DECOMPRESS=m
    CONFIG_GENERIC_ALLOCATOR=y
    CONFIG_REED_SOLOMON=m
    CONFIG_REED_SOLOMON_DEC16=y
    CONFIG_TEXTSEARCH=y
    CONFIG_TEXTSEARCH_KMP=m
    CONFIG_TEXTSEARCH_BM=m
    CONFIG_TEXTSEARCH_FSM=m
    CONFIG_PLIST=y
    CONFIG_HAS_IOMEM=y
    CONFIG_HAS_IOPORT=y
    CONFIG_HAS_DMA=y
    CONFIG_CHECK_SIGNATURE=y
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  3. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    On Wednesday, 16 of July 2008, Stephen Rothwell wrote:
    > Hi all,
    >
    > Changes since next-20080715:
    >
    > Temporarily dropped tree: ttydev (it gets too many patch failures).
    >
    > Most of the differences were conflicts moving from tree to tree as some
    > of the trees are now merged into Linus' tree. Most have been inflicted
    > on the driver-core and usb trees. I have not notified these separately.
    >
    > Because of the moving of conflicts around it is difficult to tell when
    > they are going away (though I assume some are).
    >
    > The usb.current tree lost its conflict against Linus' tree.
    >
    > The usb tree gained a conflict against Linus' tree.
    >
    > The cpus4096 tree gained a conflict against Linus' tree.
    >
    > The pci tree lost one of its build fix patches.
    >
    > The i2c tree lost a conflict against Linus' tree.
    >
    > The ide tree gained a lot of conflicts against Linus' tree because part
    > of it was merged into Linus' tree but the remaining pat modified many of
    > the same files further.
    >
    > The acpi tree gained a conflict against Linus' tree.
    >
    > The net tree gained a conflict against each of Linus' tree and the
    > powerpc tree.
    >
    > The sparc tree gained conflicts against Linus' tree and the ide and
    > sparc-current trees.
    >
    > The rr tree gained conflict against the net tree.
    >
    > The semaphore tree gained a conflict against the sparc tree.
    >
    > The generic-ipi tree gained a conflict against the powerpc tree.
    >
    > The ttydev series had many patches fail to apply, so it was dropped for
    > today.
    >
    > I have also applied the following patches for known problems:
    >
    > sparc64: sysdev API change fallout
    >
    > Patches no longer necessary:
    >
    > s390: fix compile error due to smp_call_function
    > powerpc: mman.h export fixups
    > powerpc/stacktrace: EXPORT SYMBOL_GPL needs module.h
    >
    > This tree fails to build for ARCH=sparc (i.e. 32bit) with a 64bit gcc
    > v3.4.5 - it tries to use the 64bit header files. This may be an artifact
    > of one of my merge fixups, but I don't actually think so.
    >
    > ----------------------------------------------------------------------------


    Crashes during boot on a box with Phenom X4 and AMD 790-based mainboard.
    AFAICS, the Linus' tree is unaffected and linux-next from yesterday was fine
    on the same box with the same .config.

    Full dmesg: http://www.sisk.pl/kernel/debug/next...-M3A32-MVP.log
    Kernel config: http://www.sisk.pl/kernel/debug/next...A32-MVP-config

    scsi scan: INQUIRY result too short (5), using 36
    scsi 2:0:0:0: Direct-Access PQ: 0 ANSI: 0
    ------------[ cut here ]------------
    kernel BUG at /home/rafael/src/linux-next/mm/slab.c:2822!
    invalid opcode: 0000 [1] SMP
    last sysfs file:
    CPU 0
    Modules linked in:
    Pid: 1, comm: swapper Not tainted 2.6.26-next #51
    RIP: 0010:[] [] cache_free_debugcheck+0x288/0x2b0
    RSP: 0018:ffff880127c81880 EFLAGS: 00010016
    RAX: 00da9803898590c8 RBX: ffff880127c01880 RCX: 204a483235324448
    RDX: 0000000000da9803 RSI: ffff880124488810 RDI: ffff880127c01880
    RBP: ffff880127c818b0 R08: 0000000000000058 R09: 2222222222222222
    R10: 2222222222222222 R11: 2222222222222222 R12: ffff880124488810
    R13: 09f911029d74e35b R14: 09f911029d74e35b R15: ffff880124488000
    FS: 0000000000000000(0000) GS:ffffffff806b7f40(0000) knlGS:0000000000000000
    CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
    CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process swapper (pid: 1, threadinfo ffff880127c80000, task ffff880127c7e040)
    Stack: ffffffff803f9bcb ffff880127c01880 ffff880127c0bad0 ffff880124488818
    0000000000000282 ffff880124460000 ffff880127c818e0 ffffffff802b5c16
    0000000000000000 0000000000000002 ffffffff80627d9b 0000000000000000
    Call Trace:
    [] ? scsi_probe_and_add_lun+0x86b/0xc20
    [] kfree+0xd6/0x160
    [] scsi_probe_and_add_lun+0x86b/0xc20
    [] __scsi_add_device+0xff/0x110
    [] ata_scsi_scan_host+0xdb/0x2b0
    [] ata_host_register+0x243/0x2a0
    [] ? ahci_interrupt+0x0/0x530
    [] ata_host_activate+0xa4/0x110
    [] ahci_init_one+0x9a8/0xc60
    [] pci_device_probe+0x79/0xa0
    [] driver_probe_device+0x9b/0x1a0
    [] __driver_attach+0x86/0x90
    [] ? __driver_attach+0x0/0x90
    [] bus_for_each_dev+0x5d/0x90
    [] driver_attach+0x1c/0x20
    [] bus_add_driver+0xc5/0x250
    [] driver_register+0x5f/0x140
    [] __pci_register_driver+0x7d/0xc0
    [] ? ahci_init+0x0/0x20
    [] ahci_init+0x19/0x20
    [] kernel_init+0x128/0x310
    [] ? trace_hardirqs_on_caller+0xbf/0x150
    [] ? trace_hardirqs_on+0xd/0x10
    [] ? _spin_unlock_irq+0x2b/0x40
    [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    [] ? trace_hardirqs_on_caller+0xbf/0x150
    [] child_rip+0xa/0x11
    [] ? restore_args+0x0/0x30
    [] ? kernel_init+0x0/0x310
    [] ? child_rip+0x0/0x11


    Code: 48 8b 40 10 48 8b 08 f6 c5 40 0f 84 06 fe ff ff 48 8b 40 10 48 8b 08 e9 fa fd ff ff 0f 1f 80 00 00 00 00 0f 0b eb fe 0f 0b eb fe <0f> 0b eb fe 0f 1f 40 00 48
    RIP [] cache_free_debugcheck+0x288/0x2b0
    RSP
    ---[ end trace c69efc8b7b1131cd ]---
    Kernel panic - not syncing: Attempted to kill init!
    Pid: 1, comm: swapper Tainted: G D 2.6.26-next #51

    Call Trace:
    [] panic+0xa0/0x190
    [] ? up+0x19/0x50
    [] ? printk+0x67/0x70
    [] ? account+0xc2/0x100
    [] ? extract_entropy+0x7e/0xa0
    [] do_exit+0x8bf/0x8d0
    [] ? get_random_bytes+0x1b/0x20
    [] oops_end+0x85/0x90
    [] die+0x5e/0x90
    [] do_trap+0x130/0x150
    [] do_invalid_op+0x9c/0xc0
    [] ? cache_free_debugcheck+0x288/0x2b0
    [] ? sysfs_ilookup_test+0x0/0x20
    [] ? _spin_unlock+0x26/0x30
    [] ? attribute_container_device_trigger+0x27/0xd0
    [] error_exit+0x0/0xa9
    [] ? cache_free_debugcheck+0x288/0x2b0
    [] ? scsi_probe_and_add_lun+0x86b/0xc20
    [] kfree+0xd6/0x160
    [] scsi_probe_and_add_lun+0x86b/0xc20
    [] __scsi_add_device+0xff/0x110
    [] ata_scsi_scan_host+0xdb/0x2b0
    [] ata_host_register+0x243/0x2a0
    [] ? ahci_interrupt+0x0/0x530
    [] ata_host_activate+0xa4/0x110
    [] ahci_init_one+0x9a8/0xc60
    [] pci_device_probe+0x79/0xa0
    [] driver_probe_device+0x9b/0x1a0
    [] __driver_attach+0x86/0x90
    [] ? __driver_attach+0x0/0x90
    [] bus_for_each_dev+0x5d/0x90
    [] driver_attach+0x1c/0x20
    [] bus_add_driver+0xc5/0x250
    [] driver_register+0x5f/0x140
    [] __pci_register_driver+0x7d/0xc0
    [] ? ahci_init+0x0/0x20
    [] ahci_init+0x19/0x20
    [] kernel_init+0x128/0x310
    [] ? trace_hardirqs_on_caller+0xbf/0x150
    [] ? trace_hardirqs_on+0xd/0x10
    [] ? _spin_unlock_irq+0x2b/0x40
    [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    [] ? trace_hardirqs_on_caller+0xbf/0x150
    [] child_rip+0xa/0x11
    [] ? restore_args+0x0/0x30
    [] ? kernel_init+0x0/0x310
    [] ? child_rip+0x0/0x11

    ------------[ cut here ]------------
    WARNING: at /home/rafael/src/linux-next/kernel/smp.c:288 smp_call_function_mask+0x198/0x1a0()
    Modules linked in:
    Pid: 1, comm: swapper Tainted: G D 2.6.26-next #51

    Call Trace:
    [] warn_on_slowpath+0x5f/0x80
    [] ? child_rip+0x0/0x11
    [] ? up+0x19/0x50
    [] ? printk+0x67/0x70
    [] smp_call_function_mask+0x198/0x1a0
    [] ? dump_trace+0x373/0x400
    [] ? show_trace+0x5e/0x80
    [] smp_call_function+0x1b/0x20
    [] native_smp_send_stop+0x30/0x60
    [] panic+0xad/0x190
    [] ? up+0x19/0x50
    [] ? printk+0x67/0x70
    [] ? account+0xc2/0x100
    [] ? extract_entropy+0x7e/0xa0
    [] do_exit+0x8bf/0x8d0
    [] ? get_random_bytes+0x1b/0x20
    [] oops_end+0x85/0x90
    [] die+0x5e/0x90
    [] do_trap+0x130/0x150
    [] do_invalid_op+0x9c/0xc0
    [] ? cache_free_debugcheck+0x288/0x2b0
    [] ? sysfs_ilookup_test+0x0/0x20
    [] ? _spin_unlock+0x26/0x30
    [] ? attribute_container_device_trigger+0x27/0xd0
    [] error_exit+0x0/0xa9
    [] ? cache_free_debugcheck+0x288/0x2b0
    [] ? scsi_probe_and_add_lun+0x86b/0xc20
    [] kfree+0xd6/0x160
    [] scsi_probe_and_add_lun+0x86b/0xc20
    [] __scsi_add_device+0xff/0x110
    [] ata_scsi_scan_host+0xdb/0x2b0
    [] ata_host_register+0x243/0x2a0
    [] ? ahci_interrupt+0x0/0x530
    [] ata_host_activate+0xa4/0x110
    [] ahci_init_one+0x9a8/0xc60
    [] pci_device_probe+0x79/0xa0
    [] driver_probe_device+0x9b/0x1a0
    [] __driver_attach+0x86/0x90
    [] ? __driver_attach+0x0/0x90
    [] bus_for_each_dev+0x5d/0x90
    [] driver_attach+0x1c/0x20
    [] bus_add_driver+0xc5/0x250
    [] driver_register+0x5f/0x140
    [] __pci_register_driver+0x7d/0xc0
    [] ? ahci_init+0x0/0x20
    [] ahci_init+0x19/0x20
    [] kernel_init+0x128/0x310
    [] ? trace_hardirqs_on_caller+0xbf/0x150
    [] ? trace_hardirqs_on+0xd/0x10
    [] ? _spin_unlock_irq+0x2b/0x40
    [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    [] ? trace_hardirqs_on_caller+0xbf/0x150
    [] child_rip+0xa/0x11
    [] ? restore_args+0x0/0x30
    [] ? kernel_init+0x0/0x310
    [] ? child_rip+0x0/0x11

    ---[ end trace c69efc8b7b1131cd ]---
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  4. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    On Thursday, 17 of July 2008, James Bottomley wrote:
    > On Thu, 2008-07-17 at 00:53 +0200, Rafael J. Wysocki wrote:
    > > On Wednesday, 16 of July 2008, Stephen Rothwell wrote:
    > > > Hi all,
    > > >
    > > > Changes since next-20080715:
    > > >
    > > > Temporarily dropped tree: ttydev (it gets too many patch failures).
    > > >
    > > > Most of the differences were conflicts moving from tree to tree as some
    > > > of the trees are now merged into Linus' tree. Most have been inflicted
    > > > on the driver-core and usb trees. I have not notified these separately.
    > > >
    > > > Because of the moving of conflicts around it is difficult to tell when
    > > > they are going away (though I assume some are).
    > > >
    > > > The usb.current tree lost its conflict against Linus' tree.
    > > >
    > > > The usb tree gained a conflict against Linus' tree.
    > > >
    > > > The cpus4096 tree gained a conflict against Linus' tree.
    > > >
    > > > The pci tree lost one of its build fix patches.
    > > >
    > > > The i2c tree lost a conflict against Linus' tree.
    > > >
    > > > The ide tree gained a lot of conflicts against Linus' tree because part
    > > > of it was merged into Linus' tree but the remaining pat modified many of
    > > > the same files further.
    > > >
    > > > The acpi tree gained a conflict against Linus' tree.
    > > >
    > > > The net tree gained a conflict against each of Linus' tree and the
    > > > powerpc tree.
    > > >
    > > > The sparc tree gained conflicts against Linus' tree and the ide and
    > > > sparc-current trees.
    > > >
    > > > The rr tree gained conflict against the net tree.
    > > >
    > > > The semaphore tree gained a conflict against the sparc tree.
    > > >
    > > > The generic-ipi tree gained a conflict against the powerpc tree.
    > > >
    > > > The ttydev series had many patches fail to apply, so it was dropped for
    > > > today.
    > > >
    > > > I have also applied the following patches for known problems:
    > > >
    > > > sparc64: sysdev API change fallout
    > > >
    > > > Patches no longer necessary:
    > > >
    > > > s390: fix compile error due to smp_call_function
    > > > powerpc: mman.h export fixups
    > > > powerpc/stacktrace: EXPORT SYMBOL_GPL needs module.h
    > > >
    > > > This tree fails to build for ARCH=sparc (i.e. 32bit) with a 64bit gcc
    > > > v3.4.5 - it tries to use the 64bit header files. This may be an artifact
    > > > of one of my merge fixups, but I don't actually think so.
    > > >
    > > > ----------------------------------------------------------------------------

    > >
    > > Crashes during boot on a box with Phenom X4 and AMD 790-based mainboard.
    > > AFAICS, the Linus' tree is unaffected and linux-next from yesterday was fine
    > > on the same box with the same .config.

    >
    > OK, that means that all the current SCSI patches were merged and it was
    > still OK (they're all in linus and I haven't put together the next slice
    > yet). I'd suspect something in drivers/ata (cc ide list added).
    >
    > James


    OK, let's ask Tejun and Jeff too.

    I suspect the AHCI driver, because the same kernel works on my other boxes
    with different SATA controllers.

    > > Full dmesg: http://www.sisk.pl/kernel/debug/next...-M3A32-MVP.log
    > > Kernel config: http://www.sisk.pl/kernel/debug/next...A32-MVP-config
    > >
    > > scsi scan: INQUIRY result too short (5), using 36
    > > scsi 2:0:0:0: Direct-Access PQ: 0 ANSI: 0
    > > ------------[ cut here ]------------
    > > kernel BUG at /home/rafael/src/linux-next/mm/slab.c:2822!
    > > invalid opcode: 0000 [1] SMP
    > > last sysfs file:
    > > CPU 0
    > > Modules linked in:
    > > Pid: 1, comm: swapper Not tainted 2.6.26-next #51
    > > RIP: 0010:[] [] cache_free_debugcheck+0x288/0x2b0
    > > RSP: 0018:ffff880127c81880 EFLAGS: 00010016
    > > RAX: 00da9803898590c8 RBX: ffff880127c01880 RCX: 204a483235324448
    > > RDX: 0000000000da9803 RSI: ffff880124488810 RDI: ffff880127c01880
    > > RBP: ffff880127c818b0 R08: 0000000000000058 R09: 2222222222222222
    > > R10: 2222222222222222 R11: 2222222222222222 R12: ffff880124488810
    > > R13: 09f911029d74e35b R14: 09f911029d74e35b R15: ffff880124488000
    > > FS: 0000000000000000(0000) GS:ffffffff806b7f40(0000) knlGS:0000000000000000
    > > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
    > > CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
    > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    > > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    > > Process swapper (pid: 1, threadinfo ffff880127c80000, task ffff880127c7e040)
    > > Stack: ffffffff803f9bcb ffff880127c01880 ffff880127c0bad0 ffff880124488818
    > > 0000000000000282 ffff880124460000 ffff880127c818e0 ffffffff802b5c16
    > > 0000000000000000 0000000000000002 ffffffff80627d9b 0000000000000000
    > > Call Trace:
    > > [] ? scsi_probe_and_add_lun+0x86b/0xc20
    > > [] kfree+0xd6/0x160
    > > [] scsi_probe_and_add_lun+0x86b/0xc20
    > > [] __scsi_add_device+0xff/0x110
    > > [] ata_scsi_scan_host+0xdb/0x2b0
    > > [] ata_host_register+0x243/0x2a0
    > > [] ? ahci_interrupt+0x0/0x530
    > > [] ata_host_activate+0xa4/0x110
    > > [] ahci_init_one+0x9a8/0xc60
    > > [] pci_device_probe+0x79/0xa0
    > > [] driver_probe_device+0x9b/0x1a0
    > > [] __driver_attach+0x86/0x90
    > > [] ? __driver_attach+0x0/0x90
    > > [] bus_for_each_dev+0x5d/0x90
    > > [] driver_attach+0x1c/0x20
    > > [] bus_add_driver+0xc5/0x250
    > > [] driver_register+0x5f/0x140
    > > [] __pci_register_driver+0x7d/0xc0
    > > [] ? ahci_init+0x0/0x20
    > > [] ahci_init+0x19/0x20
    > > [] kernel_init+0x128/0x310
    > > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > > [] ? trace_hardirqs_on+0xd/0x10
    > > [] ? _spin_unlock_irq+0x2b/0x40
    > > [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    > > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > > [] child_rip+0xa/0x11
    > > [] ? restore_args+0x0/0x30
    > > [] ? kernel_init+0x0/0x310
    > > [] ? child_rip+0x0/0x11
    > >
    > >
    > > Code: 48 8b 40 10 48 8b 08 f6 c5 40 0f 84 06 fe ff ff 48 8b 40 10 48 8b 08 e9 fa fd ff ff 0f 1f 80 00 00 00 00 0f 0b eb fe 0f 0b eb fe <0f> 0b eb fe 0f 1f 40 00 48
    > > RIP [] cache_free_debugcheck+0x288/0x2b0
    > > RSP
    > > ---[ end trace c69efc8b7b1131cd ]---
    > > Kernel panic - not syncing: Attempted to kill init!
    > > Pid: 1, comm: swapper Tainted: G D 2.6.26-next #51
    > >
    > > Call Trace:
    > > [] panic+0xa0/0x190
    > > [] ? up+0x19/0x50
    > > [] ? printk+0x67/0x70
    > > [] ? account+0xc2/0x100
    > > [] ? extract_entropy+0x7e/0xa0
    > > [] do_exit+0x8bf/0x8d0
    > > [] ? get_random_bytes+0x1b/0x20
    > > [] oops_end+0x85/0x90
    > > [] die+0x5e/0x90
    > > [] do_trap+0x130/0x150
    > > [] do_invalid_op+0x9c/0xc0
    > > [] ? cache_free_debugcheck+0x288/0x2b0
    > > [] ? sysfs_ilookup_test+0x0/0x20
    > > [] ? _spin_unlock+0x26/0x30
    > > [] ? attribute_container_device_trigger+0x27/0xd0
    > > [] error_exit+0x0/0xa9
    > > [] ? cache_free_debugcheck+0x288/0x2b0
    > > [] ? scsi_probe_and_add_lun+0x86b/0xc20
    > > [] kfree+0xd6/0x160
    > > [] scsi_probe_and_add_lun+0x86b/0xc20
    > > [] __scsi_add_device+0xff/0x110
    > > [] ata_scsi_scan_host+0xdb/0x2b0
    > > [] ata_host_register+0x243/0x2a0
    > > [] ? ahci_interrupt+0x0/0x530
    > > [] ata_host_activate+0xa4/0x110
    > > [] ahci_init_one+0x9a8/0xc60
    > > [] pci_device_probe+0x79/0xa0
    > > [] driver_probe_device+0x9b/0x1a0
    > > [] __driver_attach+0x86/0x90
    > > [] ? __driver_attach+0x0/0x90
    > > [] bus_for_each_dev+0x5d/0x90
    > > [] driver_attach+0x1c/0x20
    > > [] bus_add_driver+0xc5/0x250
    > > [] driver_register+0x5f/0x140
    > > [] __pci_register_driver+0x7d/0xc0
    > > [] ? ahci_init+0x0/0x20
    > > [] ahci_init+0x19/0x20
    > > [] kernel_init+0x128/0x310
    > > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > > [] ? trace_hardirqs_on+0xd/0x10
    > > [] ? _spin_unlock_irq+0x2b/0x40
    > > [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    > > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > > [] child_rip+0xa/0x11
    > > [] ? restore_args+0x0/0x30
    > > [] ? kernel_init+0x0/0x310
    > > [] ? child_rip+0x0/0x11
    > >
    > > ------------[ cut here ]------------
    > > WARNING: at /home/rafael/src/linux-next/kernel/smp.c:288 smp_call_function_mask+0x198/0x1a0()
    > > Modules linked in:
    > > Pid: 1, comm: swapper Tainted: G D 2.6.26-next #51
    > >
    > > Call Trace:
    > > [] warn_on_slowpath+0x5f/0x80
    > > [] ? child_rip+0x0/0x11
    > > [] ? up+0x19/0x50
    > > [] ? printk+0x67/0x70
    > > [] smp_call_function_mask+0x198/0x1a0
    > > [] ? dump_trace+0x373/0x400
    > > [] ? show_trace+0x5e/0x80
    > > [] smp_call_function+0x1b/0x20
    > > [] native_smp_send_stop+0x30/0x60
    > > [] panic+0xad/0x190
    > > [] ? up+0x19/0x50
    > > [] ? printk+0x67/0x70
    > > [] ? account+0xc2/0x100
    > > [] ? extract_entropy+0x7e/0xa0
    > > [] do_exit+0x8bf/0x8d0
    > > [] ? get_random_bytes+0x1b/0x20
    > > [] oops_end+0x85/0x90
    > > [] die+0x5e/0x90
    > > [] do_trap+0x130/0x150
    > > [] do_invalid_op+0x9c/0xc0
    > > [] ? cache_free_debugcheck+0x288/0x2b0
    > > [] ? sysfs_ilookup_test+0x0/0x20
    > > [] ? _spin_unlock+0x26/0x30
    > > [] ? attribute_container_device_trigger+0x27/0xd0
    > > [] error_exit+0x0/0xa9
    > > [] ? cache_free_debugcheck+0x288/0x2b0
    > > [] ? scsi_probe_and_add_lun+0x86b/0xc20
    > > [] kfree+0xd6/0x160
    > > [] scsi_probe_and_add_lun+0x86b/0xc20
    > > [] __scsi_add_device+0xff/0x110
    > > [] ata_scsi_scan_host+0xdb/0x2b0
    > > [] ata_host_register+0x243/0x2a0
    > > [] ? ahci_interrupt+0x0/0x530
    > > [] ata_host_activate+0xa4/0x110
    > > [] ahci_init_one+0x9a8/0xc60
    > > [] pci_device_probe+0x79/0xa0
    > > [] driver_probe_device+0x9b/0x1a0
    > > [] __driver_attach+0x86/0x90
    > > [] ? __driver_attach+0x0/0x90
    > > [] bus_for_each_dev+0x5d/0x90
    > > [] driver_attach+0x1c/0x20
    > > [] bus_add_driver+0xc5/0x250
    > > [] driver_register+0x5f/0x140
    > > [] __pci_register_driver+0x7d/0xc0
    > > [] ? ahci_init+0x0/0x20
    > > [] ahci_init+0x19/0x20
    > > [] kernel_init+0x128/0x310
    > > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > > [] ? trace_hardirqs_on+0xd/0x10
    > > [] ? _spin_unlock_irq+0x2b/0x40
    > > [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    > > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > > [] child_rip+0xa/0x11
    > > [] ? restore_args+0x0/0x30
    > > [] ? kernel_init+0x0/0x310
    > > [] ? child_rip+0x0/0x11
    > >
    > > ---[ end trace c69efc8b7b1131cd ]---
    > > --
    > > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
    > > the body of a message to majordomo@vger.kernel.org
    > > More majordomo info at http://vger.kernel.org/majordomo-info.html

    >
    >
    >



    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  5. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    On Thu, 2008-07-17 at 00:53 +0200, Rafael J. Wysocki wrote:
    > On Wednesday, 16 of July 2008, Stephen Rothwell wrote:
    > > Hi all,
    > >
    > > Changes since next-20080715:
    > >
    > > Temporarily dropped tree: ttydev (it gets too many patch failures).
    > >
    > > Most of the differences were conflicts moving from tree to tree as some
    > > of the trees are now merged into Linus' tree. Most have been inflicted
    > > on the driver-core and usb trees. I have not notified these separately.
    > >
    > > Because of the moving of conflicts around it is difficult to tell when
    > > they are going away (though I assume some are).
    > >
    > > The usb.current tree lost its conflict against Linus' tree.
    > >
    > > The usb tree gained a conflict against Linus' tree.
    > >
    > > The cpus4096 tree gained a conflict against Linus' tree.
    > >
    > > The pci tree lost one of its build fix patches.
    > >
    > > The i2c tree lost a conflict against Linus' tree.
    > >
    > > The ide tree gained a lot of conflicts against Linus' tree because part
    > > of it was merged into Linus' tree but the remaining pat modified many of
    > > the same files further.
    > >
    > > The acpi tree gained a conflict against Linus' tree.
    > >
    > > The net tree gained a conflict against each of Linus' tree and the
    > > powerpc tree.
    > >
    > > The sparc tree gained conflicts against Linus' tree and the ide and
    > > sparc-current trees.
    > >
    > > The rr tree gained conflict against the net tree.
    > >
    > > The semaphore tree gained a conflict against the sparc tree.
    > >
    > > The generic-ipi tree gained a conflict against the powerpc tree.
    > >
    > > The ttydev series had many patches fail to apply, so it was dropped for
    > > today.
    > >
    > > I have also applied the following patches for known problems:
    > >
    > > sparc64: sysdev API change fallout
    > >
    > > Patches no longer necessary:
    > >
    > > s390: fix compile error due to smp_call_function
    > > powerpc: mman.h export fixups
    > > powerpc/stacktrace: EXPORT SYMBOL_GPL needs module.h
    > >
    > > This tree fails to build for ARCH=sparc (i.e. 32bit) with a 64bit gcc
    > > v3.4.5 - it tries to use the 64bit header files. This may be an artifact
    > > of one of my merge fixups, but I don't actually think so.
    > >
    > > ----------------------------------------------------------------------------

    >
    > Crashes during boot on a box with Phenom X4 and AMD 790-based mainboard.
    > AFAICS, the Linus' tree is unaffected and linux-next from yesterday was fine
    > on the same box with the same .config.


    OK, that means that all the current SCSI patches were merged and it was
    still OK (they're all in linus and I haven't put together the next slice
    yet). I'd suspect something in drivers/ata (cc ide list added).

    James


    > Full dmesg: http://www.sisk.pl/kernel/debug/next...-M3A32-MVP.log
    > Kernel config: http://www.sisk.pl/kernel/debug/next...A32-MVP-config
    >
    > scsi scan: INQUIRY result too short (5), using 36
    > scsi 2:0:0:0: Direct-Access PQ: 0 ANSI: 0
    > ------------[ cut here ]------------
    > kernel BUG at /home/rafael/src/linux-next/mm/slab.c:2822!
    > invalid opcode: 0000 [1] SMP
    > last sysfs file:
    > CPU 0
    > Modules linked in:
    > Pid: 1, comm: swapper Not tainted 2.6.26-next #51
    > RIP: 0010:[] [] cache_free_debugcheck+0x288/0x2b0
    > RSP: 0018:ffff880127c81880 EFLAGS: 00010016
    > RAX: 00da9803898590c8 RBX: ffff880127c01880 RCX: 204a483235324448
    > RDX: 0000000000da9803 RSI: ffff880124488810 RDI: ffff880127c01880
    > RBP: ffff880127c818b0 R08: 0000000000000058 R09: 2222222222222222
    > R10: 2222222222222222 R11: 2222222222222222 R12: ffff880124488810
    > R13: 09f911029d74e35b R14: 09f911029d74e35b R15: ffff880124488000
    > FS: 0000000000000000(0000) GS:ffffffff806b7f40(0000) knlGS:0000000000000000
    > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
    > CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
    > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    > Process swapper (pid: 1, threadinfo ffff880127c80000, task ffff880127c7e040)
    > Stack: ffffffff803f9bcb ffff880127c01880 ffff880127c0bad0 ffff880124488818
    > 0000000000000282 ffff880124460000 ffff880127c818e0 ffffffff802b5c16
    > 0000000000000000 0000000000000002 ffffffff80627d9b 0000000000000000
    > Call Trace:
    > [] ? scsi_probe_and_add_lun+0x86b/0xc20
    > [] kfree+0xd6/0x160
    > [] scsi_probe_and_add_lun+0x86b/0xc20
    > [] __scsi_add_device+0xff/0x110
    > [] ata_scsi_scan_host+0xdb/0x2b0
    > [] ata_host_register+0x243/0x2a0
    > [] ? ahci_interrupt+0x0/0x530
    > [] ata_host_activate+0xa4/0x110
    > [] ahci_init_one+0x9a8/0xc60
    > [] pci_device_probe+0x79/0xa0
    > [] driver_probe_device+0x9b/0x1a0
    > [] __driver_attach+0x86/0x90
    > [] ? __driver_attach+0x0/0x90
    > [] bus_for_each_dev+0x5d/0x90
    > [] driver_attach+0x1c/0x20
    > [] bus_add_driver+0xc5/0x250
    > [] driver_register+0x5f/0x140
    > [] __pci_register_driver+0x7d/0xc0
    > [] ? ahci_init+0x0/0x20
    > [] ahci_init+0x19/0x20
    > [] kernel_init+0x128/0x310
    > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > [] ? trace_hardirqs_on+0xd/0x10
    > [] ? _spin_unlock_irq+0x2b/0x40
    > [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > [] child_rip+0xa/0x11
    > [] ? restore_args+0x0/0x30
    > [] ? kernel_init+0x0/0x310
    > [] ? child_rip+0x0/0x11
    >
    >
    > Code: 48 8b 40 10 48 8b 08 f6 c5 40 0f 84 06 fe ff ff 48 8b 40 10 48 8b 08 e9 fa fd ff ff 0f 1f 80 00 00 00 00 0f 0b eb fe 0f 0b eb fe <0f> 0b eb fe 0f 1f 40 00 48
    > RIP [] cache_free_debugcheck+0x288/0x2b0
    > RSP
    > ---[ end trace c69efc8b7b1131cd ]---
    > Kernel panic - not syncing: Attempted to kill init!
    > Pid: 1, comm: swapper Tainted: G D 2.6.26-next #51
    >
    > Call Trace:
    > [] panic+0xa0/0x190
    > [] ? up+0x19/0x50
    > [] ? printk+0x67/0x70
    > [] ? account+0xc2/0x100
    > [] ? extract_entropy+0x7e/0xa0
    > [] do_exit+0x8bf/0x8d0
    > [] ? get_random_bytes+0x1b/0x20
    > [] oops_end+0x85/0x90
    > [] die+0x5e/0x90
    > [] do_trap+0x130/0x150
    > [] do_invalid_op+0x9c/0xc0
    > [] ? cache_free_debugcheck+0x288/0x2b0
    > [] ? sysfs_ilookup_test+0x0/0x20
    > [] ? _spin_unlock+0x26/0x30
    > [] ? attribute_container_device_trigger+0x27/0xd0
    > [] error_exit+0x0/0xa9
    > [] ? cache_free_debugcheck+0x288/0x2b0
    > [] ? scsi_probe_and_add_lun+0x86b/0xc20
    > [] kfree+0xd6/0x160
    > [] scsi_probe_and_add_lun+0x86b/0xc20
    > [] __scsi_add_device+0xff/0x110
    > [] ata_scsi_scan_host+0xdb/0x2b0
    > [] ata_host_register+0x243/0x2a0
    > [] ? ahci_interrupt+0x0/0x530
    > [] ata_host_activate+0xa4/0x110
    > [] ahci_init_one+0x9a8/0xc60
    > [] pci_device_probe+0x79/0xa0
    > [] driver_probe_device+0x9b/0x1a0
    > [] __driver_attach+0x86/0x90
    > [] ? __driver_attach+0x0/0x90
    > [] bus_for_each_dev+0x5d/0x90
    > [] driver_attach+0x1c/0x20
    > [] bus_add_driver+0xc5/0x250
    > [] driver_register+0x5f/0x140
    > [] __pci_register_driver+0x7d/0xc0
    > [] ? ahci_init+0x0/0x20
    > [] ahci_init+0x19/0x20
    > [] kernel_init+0x128/0x310
    > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > [] ? trace_hardirqs_on+0xd/0x10
    > [] ? _spin_unlock_irq+0x2b/0x40
    > [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > [] child_rip+0xa/0x11
    > [] ? restore_args+0x0/0x30
    > [] ? kernel_init+0x0/0x310
    > [] ? child_rip+0x0/0x11
    >
    > ------------[ cut here ]------------
    > WARNING: at /home/rafael/src/linux-next/kernel/smp.c:288 smp_call_function_mask+0x198/0x1a0()
    > Modules linked in:
    > Pid: 1, comm: swapper Tainted: G D 2.6.26-next #51
    >
    > Call Trace:
    > [] warn_on_slowpath+0x5f/0x80
    > [] ? child_rip+0x0/0x11
    > [] ? up+0x19/0x50
    > [] ? printk+0x67/0x70
    > [] smp_call_function_mask+0x198/0x1a0
    > [] ? dump_trace+0x373/0x400
    > [] ? show_trace+0x5e/0x80
    > [] smp_call_function+0x1b/0x20
    > [] native_smp_send_stop+0x30/0x60
    > [] panic+0xad/0x190
    > [] ? up+0x19/0x50
    > [] ? printk+0x67/0x70
    > [] ? account+0xc2/0x100
    > [] ? extract_entropy+0x7e/0xa0
    > [] do_exit+0x8bf/0x8d0
    > [] ? get_random_bytes+0x1b/0x20
    > [] oops_end+0x85/0x90
    > [] die+0x5e/0x90
    > [] do_trap+0x130/0x150
    > [] do_invalid_op+0x9c/0xc0
    > [] ? cache_free_debugcheck+0x288/0x2b0
    > [] ? sysfs_ilookup_test+0x0/0x20
    > [] ? _spin_unlock+0x26/0x30
    > [] ? attribute_container_device_trigger+0x27/0xd0
    > [] error_exit+0x0/0xa9
    > [] ? cache_free_debugcheck+0x288/0x2b0
    > [] ? scsi_probe_and_add_lun+0x86b/0xc20
    > [] kfree+0xd6/0x160
    > [] scsi_probe_and_add_lun+0x86b/0xc20
    > [] __scsi_add_device+0xff/0x110
    > [] ata_scsi_scan_host+0xdb/0x2b0
    > [] ata_host_register+0x243/0x2a0
    > [] ? ahci_interrupt+0x0/0x530
    > [] ata_host_activate+0xa4/0x110
    > [] ahci_init_one+0x9a8/0xc60
    > [] pci_device_probe+0x79/0xa0
    > [] driver_probe_device+0x9b/0x1a0
    > [] __driver_attach+0x86/0x90
    > [] ? __driver_attach+0x0/0x90
    > [] bus_for_each_dev+0x5d/0x90
    > [] driver_attach+0x1c/0x20
    > [] bus_add_driver+0xc5/0x250
    > [] driver_register+0x5f/0x140
    > [] __pci_register_driver+0x7d/0xc0
    > [] ? ahci_init+0x0/0x20
    > [] ahci_init+0x19/0x20
    > [] kernel_init+0x128/0x310
    > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > [] ? trace_hardirqs_on+0xd/0x10
    > [] ? _spin_unlock_irq+0x2b/0x40
    > [] ? trace_hardirqs_on_thunk+0x3a/0x3f
    > [] ? trace_hardirqs_on_caller+0xbf/0x150
    > [] child_rip+0xa/0x11
    > [] ? restore_args+0x0/0x30
    > [] ? kernel_init+0x0/0x310
    > [] ? child_rip+0x0/0x11
    >
    > ---[ end trace c69efc8b7b1131cd ]---
    > --
    > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
    > the body of a message to majordomo@vger.kernel.org
    > More majordomo info at http://vger.kernel.org/majordomo-info.html


    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  6. Re: linux-next: Tree for July 16

    On Wed, Jul 16, 2008 at 20:15:50 +0200, Takashi Iwai wrote:

    [...]

    > On the older system, it's like
    > /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS0VTJ1DP401567-part6
    > and now it's like
    > /dev/disk/by-id/scsi-1ATA_SAMSUNG_HD160JJS0VTJ1DP401567-part6


    This is also mentioned in
    http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=490110, but I don't
    know if the page contains a solution.

    Regards,
    Tino
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  7. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    Hello,

    Rafael J. Wysocki wrote:
    >>> Crashes during boot on a box with Phenom X4 and AMD 790-based mainboard.
    >>> AFAICS, the Linus' tree is unaffected and linux-next from yesterday was fine
    >>> on the same box with the same .config.

    >> OK, that means that all the current SCSI patches were merged and it was
    >> still OK (they're all in linus and I haven't put together the next slice
    >> yet). I'd suspect something in drivers/ata (cc ide list added).
    >>
    >> James

    >
    > OK, let's ask Tejun and Jeff too.
    >
    > I suspect the AHCI driver, because the same kernel works on my other boxes
    > with different SATA controllers.
    >
    >>> Full dmesg: http://www.sisk.pl/kernel/debug/next...-M3A32-MVP.log
    >>> Kernel config: http://www.sisk.pl/kernel/debug/next...A32-MVP-config
    >>>
    >>> scsi scan: INQUIRY result too short (5), using 36
    >>> scsi 2:0:0:0: Direct-Access PQ: 0 ANSI: 0
    >>> ------------[ cut here ]------------
    >>> kernel BUG at /home/rafael/src/linux-next/mm/slab.c:2822!


    The offending commit was 83e7d317cef3ee624886f128401a72e414c0a99d
    which implements sg iterator but it forgot to add offset to the
    kmapped address and copy goes out of bounds. Takashi, this could also
    be the problem you were seeing if you don't have slab debugging turned
    on.

    The implemented iterator didn't look too pretty and the usage was
    quite awkward involving a callback and end condition check distributed
    between the callback and the outer user who runs the loop. For
    copying, end of buffer condition was tested by testing whether the
    callback returned 0 copied bytes for the iteration but AFAIK there's
    no restriction against zero length sg entry in the middle and it will
    terminate the copying prematurely.

    So, I implemented slightly different version which follows below.

    Subject: [PATCH next-20080716] sg: reimplement sg mapping iterator

    sg mapping iterator implemented by 83e7d317... had a bug and was a bit
    awkard to use. Reimplement it as more regular iterator with start,
    next and stop. As there's already an sg iterator which iterates over
    sg entries themselves, name this sg_mapping_iterator.

    Signed-off-by: Tejun Heo
    Cc: Pierre Ossman
    ---
    include/linux/scatterlist.h | 43 +++++++---
    lib/scatterlist.c | 186 ++++++++++++++++++++++----------------------
    2 files changed, 125 insertions(+), 104 deletions(-)

    diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
    index 93411a1..c9058b0 100644
    --- a/include/linux/scatterlist.h
    +++ b/include/linux/scatterlist.h
    @@ -13,12 +13,6 @@ struct sg_table {
    unsigned int orig_nents; /* original size of list */
    };

    -struct sg_iterator {
    - struct scatterlist *sg; /* current entry */
    - unsigned int nents; /* number of remaining entries */
    - unsigned int offset; /* offset within sg */
    -};
    -
    /*
    * Notes on SG table design.
    *
    @@ -219,12 +213,6 @@ int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int, gfp_t,
    sg_alloc_fn *);
    int sg_alloc_table(struct sg_table *, unsigned int, gfp_t);

    -typedef size_t (sg_iter_fn)(void *, size_t, struct page *, void *);
    -
    -void sg_iter_init(struct sg_iterator *iter, struct scatterlist *sgl,
    - unsigned int nents);
    -size_t sg_iterate(struct sg_iterator *iter, sg_iter_fn *fn, void *priv);
    -
    size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents,
    void *buf, size_t buflen);
    size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
    @@ -236,4 +224,35 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
    */
    #define SG_MAX_SINGLE_ALLOC (PAGE_SIZE / sizeof(struct scatterlist))

    +
    +/*
    + * Mapping sg iterator
    + *
    + * Iterates over sg entries mapping page-by-page. On each successful
    + * iteration, @miter->page points to the mapped page and
    + * @miter->length bytes of data can be accessed at @miter->addr. As
    + * long as an interation is enclosed between start and stop, the user
    + * is free to choose control structure and when to stop.
    + */
    +
    +#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */
    +
    +struct sg_mapping_iter {
    + /* the following three fields can be accessed directly */
    + struct page *page; /* currently mapped page */
    + void *addr; /* pointer to the mapped area */
    + size_t length; /* length of the mapped area */
    +
    + /* these are internal states, keep away */
    + struct scatterlist *__sg; /* current entry */
    + unsigned int __nents; /* nr of remaining entries */
    + unsigned int __offset; /* offset within sg */
    + unsigned int __flags;
    +};
    +
    +void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
    + unsigned int nents, unsigned int flags);
    +bool sg_miter_next(struct sg_mapping_iter *miter);
    +void sg_miter_stop(struct sg_mapping_iter *miter);
    +
    #endif /* _LINUX_SCATTERLIST_H */
    diff --git a/lib/scatterlist.c b/lib/scatterlist.c
    index ea8c3a1..6d51bd3 100644
    --- a/lib/scatterlist.c
    +++ b/lib/scatterlist.c
    @@ -295,115 +295,107 @@ int sg_alloc_table(struct sg_table *table, unsigned int nents, gfp_t gfp_mask)
    EXPORT_SYMBOL(sg_alloc_table);

    /**
    - * sg_iter_init - Initialize/reset an sg iterator structure
    - * @iter: The sg iterator structure
    - * @sgl: The sg list to iterate over
    - * @nents: Number of sg entries
    + * sg_miter_start - start mapping iteration over a sg list
    + * @miter: sg mapping iter to be started
    + * @sgl: sg list to iterate over
    + * @nents: number of sg entries
    *
    - * Description:
    - * Sets up the internal state of the sg iterator structure
    - * to the beginning of the given sg list.
    + * Description:
    + * Starts mapping iterator @miter.
    + *
    + * Context:
    + * Don't care.
    */
    -void sg_iter_init(struct sg_iterator *iter, struct scatterlist *sgl,
    - unsigned int nents)
    +void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
    + unsigned int nents, unsigned int flags)
    {
    - memset(iter, 0, sizeof(struct sg_iterator));
    + memset(miter, 0, sizeof(struct sg_mapping_iter));

    - iter->sg = sgl;
    - iter->nents = nents;
    - iter->offset = 0;
    + miter->__sg = sgl;
    + miter->__nents = nents;
    + miter->__offset = 0;
    + miter->__flags = flags;
    }
    -EXPORT_SYMBOL(sg_iter_init);
    +EXPORT_SYMBOL(sg_miter_start);

    /**
    - * sg_iterate - Process the next chunk of the sg list
    - * @iter: The sg iterator structure
    - * @fn: Function that will process the data
    - * @priv: Private data passed on to @fn@
    + * sg_miter_next - proceed mapping iterator to the next mapping
    + * @miter: sg mapping iter to proceed
    *
    - * Description:
    - * The main worker of sg list iteration. Each invokation will
    - * call @fn@ with a chunk of data that has been mapped into
    - * kernel reachable virtual memory. The function must return
    - * the number of bytes processed, which may be less than the
    - * total size of the current chunk.
    + * Description:
    + * Proceeds @miter@ to the next mapping. @miter@ should have been
    + * started using sg_miter_start(). On successful return,
    + * @miter@->page, @miter@->addr and @miter@->length point to the
    + * current mapping.
    *
    - * It is not required that @fn@ and @priv@ are identical between
    - * each invokation, allowing separate processing of different
    - * sections of the sg list.
    + * Context:
    + * IRQ disabled if SG_MITER_ATOMIC. IRQ must stay disabled till
    + * @miter@ is stopped. May sleep if !SG_MITER_ATOMIC.
    *
    - * The return value is that given by @fn@, or 0 if the end of
    - * the sg list has been reached.
    + * Returns:
    + * true if @miter contains the next mapping. false if end of sg
    + * list is reached.
    */
    -size_t sg_iterate(struct sg_iterator *iter, sg_iter_fn *fn, void *priv)
    +bool sg_miter_next(struct sg_mapping_iter *miter)
    {
    - struct page *page;
    - int n;
    - size_t buflen;
    - unsigned int sg_offset, sg_remain;
    -
    - void *buf;
    - size_t result;
    -
    - WARN_ON(!irqs_disabled());
    + unsigned int off, len;

    - if (iter->nents == 0)
    - return 0;
    + /* check for end and drop resources from the last iteration */
    + if (!miter->__nents)
    + return false;

    - sg_offset = iter->sg->offset + iter->offset;
    - sg_remain = iter->sg->length - iter->offset;
    + sg_miter_stop(miter);

    - n = sg_offset / PAGE_SIZE;
    - page = nth_page(sg_page(iter->sg), n);
    + /* map the next page */
    + off = miter->__sg->offset + miter->__offset;
    + len = miter->__sg->length - miter->__offset;

    - buflen = PAGE_SIZE - (sg_offset % PAGE_SIZE);
    - if (buflen > sg_remain)
    - buflen = sg_remain;
    + miter->page = nth_page(sg_page(miter->__sg), off >> PAGE_SHIFT);
    + off &= ~PAGE_MASK;
    + miter->length = min_t(unsigned int, len, PAGE_SIZE - off);

    - buf = kmap_atomic(page, KM_BIO_SRC_IRQ);
    - result = fn(buf, buflen, page, priv);
    - kunmap_atomic(buf, KM_BIO_SRC_IRQ);
    -
    - WARN_ON(result > buflen);
    -
    - iter->offset += result;
    + if (miter->__flags & SG_MITER_ATOMIC)
    + miter->addr = kmap_atomic(miter->page, KM_BIO_SRC_IRQ) + off;
    + else
    + miter->addr = kmap(miter->page) + off;

    - if (iter->offset == iter->sg->length) {
    - iter->nents--;
    - if (iter->nents)
    - iter->sg = sg_next(iter->sg);
    - iter->offset = 0;
    + /* proceed the iterator */
    + miter->__offset += miter->length;
    + if (miter->__offset == miter->__sg->length && --miter->__nents) {
    + miter->__sg = sg_next(miter->__sg);
    + miter->__offset = 0;
    }

    - return result;
    + return true;
    }
    -EXPORT_SYMBOL(sg_iterate);
    +EXPORT_SYMBOL(sg_miter_next);

    -struct sg_copy_state {
    - void *buf;
    - size_t offset, buflen;
    - int to_buffer;
    -};
    -
    -static size_t sg_copy_worker(void *buf, size_t buflen,
    - struct page *page, void *priv)
    +/**
    + * sg_miter_stop - stop mapping iteration
    + * @miter: sg mapping iter to be stopped
    + *
    + * Description:
    + * Stops mapping iterator @miter.
    + *
    + * Context:
    + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
    + */
    +void sg_miter_stop(struct sg_mapping_iter *miter)
    {
    - struct sg_copy_state *st = priv;
    -
    - if (buflen > (st->buflen - st->offset))
    - buflen = st->buflen - st->offset;
    + /* drop resources from the last iteration */
    + if (miter->addr) {
    + if (miter->__flags & SG_MITER_ATOMIC) {
    + WARN_ON(!irqs_disabled());
    + kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
    + } else
    + kunmap(miter->addr);

    - if (st->to_buffer)
    - memcpy(st->buf + st->offset, buf, buflen);
    - else {
    - memcpy(buf, st->buf + st->offset, buflen);
    - flush_kernel_dcache_page(page);
    + miter->page = NULL;
    + miter->addr = NULL;
    + miter->length = 0;
    }
    -
    - st->offset += buflen;
    -
    - return buflen;
    }
    +EXPORT_SYMBOL(sg_miter_stop);

    /**
    * sg_copy_buffer - Copy data between a linear buffer and an SG list
    @@ -420,19 +412,29 @@ static size_t sg_copy_worker(void *buf, size_t buflen,
    static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
    void *buf, size_t buflen, int to_buffer)
    {
    - struct sg_iterator iter;
    - struct sg_copy_state state;
    + unsigned int offset = 0;
    + struct sg_mapping_iter miter;
    +
    + sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
    +
    + while (sg_miter_next(&miter) && offset < buflen) {
    + unsigned int len;

    - sg_iter_init(&iter, sgl, nents);
    + len = min(miter.length, buflen - offset);

    - state.buf = buf;
    - state.offset = 0;
    - state.buflen = buflen;
    - state.to_buffer = to_buffer;
    + if (to_buffer)
    + memcpy(buf + offset, miter.addr, len);
    + else {
    + memcpy(miter.addr, buf + offset, len);
    + flush_kernel_dcache_page(miter.page);
    + }
    +
    + offset += len;
    + }

    - while (sg_iterate(&iter, sg_copy_worker, &state));
    + sg_miter_stop(&miter);

    - return state.offset;
    + return offset;
    }

    /**
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  8. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    On Fri, 18 Jul 2008 21:38:56 +0900
    Tejun Heo wrote:

    >
    > The offending commit was 83e7d317cef3ee624886f128401a72e414c0a99d
    > which implements sg iterator but it forgot to add offset to the
    > kmapped address and copy goes out of bounds. Takashi, this could also
    > be the problem you were seeing if you don't have slab debugging turned
    > on.
    >


    Oops, sorry. This thing wasn't supposed to go out and mess with anyone
    else's tree quite yet. I'll make sure to clean out my -next tree right
    away.

    > The implemented iterator didn't look too pretty and the usage was
    > quite awkward involving a callback and end condition check distributed
    > between the callback and the outer user who runs the loop. For
    > copying, end of buffer condition was tested by testing whether the
    > callback returned 0 copied bytes for the iteration but AFAIK there's
    > no restriction against zero length sg entry in the middle and it will
    > terminate the copying prematurely.
    >
    > So, I implemented slightly different version which follows below.
    >


    I just have one objection to your version, and that is that it cannot
    be used to nibble away at the sg list. The _next() call jumps an entire
    page, whereas you sometimes need to consume that page in two different
    sweeps. This could be handled by some external buffer that keeps the
    remainder of the page, but the point of these functions was to keep
    things simple for the callers.

    Rgds
    --
    -- Pierre Ossman

    WARNING: This correspondence is being monitored by the
    Swedish government. Make sure your server uses encryption
    for SMTP traffic and consider using PGP for end-to-end
    encryption.

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v2.0.9 (GNU/Linux)

    iEYEARECAAYFAkiBHYoACgkQ7b8eESbyJLjioACgq9/meiFFoM9mYVbZ+dUmHKbR
    YkQAniXrU9ByoRAnds3bxb4VqRUg1xaQ
    =Hk64
    -----END PGP SIGNATURE-----


  9. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    Pierre Ossman wrote:
    > I just have one objection to your version, and that is that it cannot
    > be used to nibble away at the sg list. The _next() call jumps an entire
    > page, whereas you sometimes need to consume that page in two different
    > sweeps. This could be handled by some external buffer that keeps the
    > remainder of the page, but the point of these functions was to keep
    > things simple for the callers.


    Well, I don't know how often such usages would be necessary. If it's a
    very common ops, you can add a param to the next function but frankly I
    think it's better to build a inside control structure for that. There's
    no need for external buffer, just an inner loop is sufficient.

    --
    tejun
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  10. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    On Sat, 19 Jul 2008 09:59:11 +0900
    Tejun Heo wrote:

    > Pierre Ossman wrote:
    > > I just have one objection to your version, and that is that it cannot
    > > be used to nibble away at the sg list. The _next() call jumps an entire
    > > page, whereas you sometimes need to consume that page in two different
    > > sweeps. This could be handled by some external buffer that keeps the
    > > remainder of the page, but the point of these functions was to keep
    > > things simple for the callers.

    >
    > Well, I don't know how often such usages would be necessary. If it's a
    > very common ops, you can add a param to the next function but frankly I
    > think it's better to build a inside control structure for that. There's
    > no need for external buffer, just an inner loop is sufficient.
    >


    I'm not sure how this can be solved by an inner loop. My primary use
    case is:

    1. Wait for interrupt
    2. Write n bytes
    3. goto 1

    n has no guarantee of being aligned to any page boundaries, so state
    needs to be kept between each invokation of writing a chunk of data. I
    doubt I'm alone in this use pattern (in fact, most device drivers using
    PIO should do something similar).

    --
    -- Pierre Ossman

    WARNING: This correspondence is being monitored by the
    Swedish government. Make sure your server uses encryption
    for SMTP traffic and consider using PGP for end-to-end
    encryption.

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v2.0.9 (GNU/Linux)

    iEYEARECAAYFAkiBQ84ACgkQ7b8eESbyJLh53QCg7qnc+iwa36 yyuiN8TlQ4A9Yj
    0WQAoLHgjuev75S9ngB8lO9/0neIaAvZ
    =Oe++
    -----END PGP SIGNATURE-----


  11. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    Pierre Ossman wrote:
    >> Well, I don't know how often such usages would be necessary. If it's a
    >> very common ops, you can add a param to the next function but frankly I
    >> think it's better to build a inside control structure for that. There's
    >> no need for external buffer, just an inner loop is sufficient.
    >>

    >
    > I'm not sure how this can be solved by an inner loop. My primary use
    > case is:
    >
    > 1. Wait for interrupt
    > 2. Write n bytes
    > 3. goto 1
    >
    > n has no guarantee of being aligned to any page boundaries, so state
    > needs to be kept between each invokation of writing a chunk of data. I
    > doubt I'm alone in this use pattern (in fact, most device drivers using
    > PIO should do something similar).


    Oh... I see. How about adding sg_miter_consume(@miter, @bytes)? If the
    function is never called, the whole chunk is assumed to be consumed. If
    the function is called only @bytes are consumed.

    --
    tejun
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  12. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    On Sat, 19 Jul 2008 11:12:17 +0900
    Tejun Heo wrote:

    >
    > Oh... I see. How about adding sg_miter_consume(@miter, @bytes)? If the
    > function is never called, the whole chunk is assumed to be consumed. If
    > the function is called only @bytes are consumed.
    >


    Sounds reasonable. Care to make an independent patch so that I can
    continue my PIO hacking adventures?

    Rgds
    --
    -- Pierre Ossman

    WARNING: This correspondence is being monitored by the
    Swedish government. Make sure your server uses encryption
    for SMTP traffic and consider using PGP for end-to-end
    encryption.

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v2.0.9 (GNU/Linux)

    iEYEARECAAYFAkiB2PgACgkQ7b8eESbyJLjB2QCg1KCslUIDEm rKFM9JVmIIIShK
    jfIAoPg5hu1NeLw/v+DiodxZY/bqK3pd
    =N4n4
    -----END PGP SIGNATURE-----


  13. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    Pierre Ossman wrote:
    > On Sat, 19 Jul 2008 11:12:17 +0900
    > Tejun Heo wrote:
    >
    >> Oh... I see. How about adding sg_miter_consume(@miter, @bytes)? If the
    >> function is never called, the whole chunk is assumed to be consumed. If
    >> the function is called only @bytes are consumed.
    >>

    >
    > Sounds reasonable. Care to make an independent patch so that I can
    > continue my PIO hacking adventures?


    Sure thing. Here you go. :-)

    Subject: [PATCH 2.6.26] sg: reimplement sg mapping iterator

    This is alternative implementation of sg content iterator introduced
    by commit 83e7d317... from Pierre Ossman in next-20080716. As there's
    already an sg iterator which iterates over sg entries themselves, name
    this sg_mapping_iterator.

    Slightly edited description from the original implementation follows.

    Iteration over a sg list is not that trivial when you take into
    account that memory pages might have to be mapped before being used.
    Unfortunately, that means that some parts of the kernel restrict
    themselves to directly accesible memory just to not have to deal with
    the mess.

    This patch adds a simple iterator system that allows any code to
    easily traverse an sg list and not have to deal with all the details.
    The user can decide to consume part of the iteration. Also, iteration
    can be stopped and resumed later if releasing the kmap between
    iteration steps is necessary. These features are useful to implement
    piecemeal sg copying for interrupt drive PIO for example.

    Signed-off-by: Tejun Heo
    Cc: Pierre Ossman
    ---
    include/linux/scatterlist.h | 38 +++++++++
    lib/scatterlist.c | 176 ++++++++++++++++++++++++++++++++------------
    2 files changed, 168 insertions(+), 46 deletions(-)

    diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
    index 71fc813..e599698 100644
    --- a/include/linux/scatterlist.h
    +++ b/include/linux/scatterlist.h
    @@ -224,4 +224,42 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
    */
    #define SG_MAX_SINGLE_ALLOC (PAGE_SIZE / sizeof(struct scatterlist))

    +
    +/*
    + * Mapping sg iterator
    + *
    + * Iterates over sg entries mapping page-by-page. On each successful
    + * iteration, @miter->page points to the mapped page and
    + * @miter->length bytes of data can be accessed at @miter->addr. As
    + * long as an interation is enclosed between start and stop, the user
    + * is free to choose control structure and when to stop.
    + *
    + * @miter->consumed is set to @miter->length on each iteration. It
    + * can be adjusted if the user can't consume all the bytes in one go.
    + * Also, a stopped iteration can be resumed by calling next on it.
    + * This is useful when iteration needs to release all resources and
    + * continue later (e.g. at the next interrupt).
    + */
    +
    +#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */
    +
    +struct sg_mapping_iter {
    + /* the following three fields can be accessed directly */
    + struct page *page; /* currently mapped page */
    + void *addr; /* pointer to the mapped area */
    + size_t length; /* length of the mapped area */
    + size_t consumed; /* number of consumed bytes */
    +
    + /* these are internal states, keep away */
    + struct scatterlist *__sg; /* current entry */
    + unsigned int __nents; /* nr of remaining entries */
    + unsigned int __offset; /* offset within sg */
    + unsigned int __flags;
    +};
    +
    +void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
    + unsigned int nents, unsigned int flags);
    +bool sg_miter_next(struct sg_mapping_iter *miter);
    +void sg_miter_stop(struct sg_mapping_iter *miter);
    +
    #endif /* _LINUX_SCATTERLIST_H */
    diff --git a/lib/scatterlist.c b/lib/scatterlist.c
    index b80c211..876ba6d 100644
    --- a/lib/scatterlist.c
    +++ b/lib/scatterlist.c
    @@ -295,6 +295,117 @@ int sg_alloc_table(struct sg_table *table, unsigned int nents, gfp_t gfp_mask)
    EXPORT_SYMBOL(sg_alloc_table);

    /**
    + * sg_miter_start - start mapping iteration over a sg list
    + * @miter: sg mapping iter to be started
    + * @sgl: sg list to iterate over
    + * @nents: number of sg entries
    + *
    + * Description:
    + * Starts mapping iterator @miter.
    + *
    + * Context:
    + * Don't care.
    + */
    +void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
    + unsigned int nents, unsigned int flags)
    +{
    + memset(miter, 0, sizeof(struct sg_mapping_iter));
    +
    + miter->__sg = sgl;
    + miter->__nents = nents;
    + miter->__offset = 0;
    + miter->__flags = flags;
    +}
    +EXPORT_SYMBOL(sg_miter_start);
    +
    +/**
    + * sg_miter_next - proceed mapping iterator to the next mapping
    + * @miter: sg mapping iter to proceed
    + *
    + * Description:
    + * Proceeds @miter@ to the next mapping. @miter@ should have been
    + * started using sg_miter_start(). On successful return,
    + * @miter@->page, @miter@->addr and @miter@->length point to the
    + * current mapping.
    + *
    + * Context:
    + * IRQ disabled if SG_MITER_ATOMIC. IRQ must stay disabled till
    + * @miter@ is stopped. May sleep if !SG_MITER_ATOMIC.
    + *
    + * Returns:
    + * true if @miter contains the next mapping. false if end of sg
    + * list is reached.
    + */
    +bool sg_miter_next(struct sg_mapping_iter *miter)
    +{
    + unsigned int off, len;
    +
    + /* check for end and drop resources from the last iteration */
    + if (!miter->__nents)
    + return false;
    +
    + sg_miter_stop(miter);
    +
    + /* get to the next sg if necessary. __offset is adjusted by stop */
    + if (miter->__offset == miter->__sg->length && --miter->__nents) {
    + miter->__sg = sg_next(miter->__sg);
    + miter->__offset = 0;
    + }
    +
    + /* map the next page */
    + off = miter->__sg->offset + miter->__offset;
    + len = miter->__sg->length - miter->__offset;
    +
    + miter->page = nth_page(sg_page(miter->__sg), off >> PAGE_SHIFT);
    + off &= ~PAGE_MASK;
    + miter->length = min_t(unsigned int, len, PAGE_SIZE - off);
    + miter->consumed = miter->length;
    +
    + if (miter->__flags & SG_MITER_ATOMIC)
    + miter->addr = kmap_atomic(miter->page, KM_BIO_SRC_IRQ) + off;
    + else
    + miter->addr = kmap(miter->page) + off;
    +
    + return true;
    +}
    +EXPORT_SYMBOL(sg_miter_next);
    +
    +/**
    + * sg_miter_stop - stop mapping iteration
    + * @miter: sg mapping iter to be stopped
    + *
    + * Description:
    + * Stops mapping iterator @miter. @miter should have been started
    + * started using sg_miter_start(). A stopped iteration can be
    + * resumed by calling sg_miter_next() on it. This is useful when
    + * resources (kmap) need to be released during iteration.
    + *
    + * Context:
    + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
    + */
    +void sg_miter_stop(struct sg_mapping_iter *miter)
    +{
    + WARN_ON(miter->consumed > miter->length);
    +
    + /* drop resources from the last iteration */
    + if (miter->addr) {
    + miter->__offset += miter->consumed;
    +
    + if (miter->__flags & SG_MITER_ATOMIC) {
    + WARN_ON(!irqs_disabled());
    + kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
    + } else
    + kunmap(miter->addr);
    +
    + miter->page = NULL;
    + miter->addr = NULL;
    + miter->length = 0;
    + miter->consumed = 0;
    + }
    +}
    +EXPORT_SYMBOL(sg_miter_stop);
    +
    +/**
    * sg_copy_buffer - Copy data between a linear buffer and an SG list
    * @sgl: The SG list
    * @nents: Number of SG entries
    @@ -309,56 +420,29 @@ EXPORT_SYMBOL(sg_alloc_table);
    static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
    void *buf, size_t buflen, int to_buffer)
    {
    - struct scatterlist *sg;
    - size_t buf_off = 0;
    - int i;
    -
    - WARN_ON(!irqs_disabled());
    -
    - for_each_sg(sgl, sg, nents, i) {
    - struct page *page;
    - int n = 0;
    - unsigned int sg_off = sg->offset;
    - unsigned int sg_copy = sg->length;
    -
    - if (sg_copy > buflen)
    - sg_copy = buflen;
    - buflen -= sg_copy;
    -
    - while (sg_copy > 0) {
    - unsigned int page_copy;
    - void *p;
    -
    - page_copy = PAGE_SIZE - sg_off;
    - if (page_copy > sg_copy)
    - page_copy = sg_copy;
    -
    - page = nth_page(sg_page(sg), n);
    - p = kmap_atomic(page, KM_BIO_SRC_IRQ);
    -
    - if (to_buffer)
    - memcpy(buf + buf_off, p + sg_off, page_copy);
    - else {
    - memcpy(p + sg_off, buf + buf_off, page_copy);
    - flush_kernel_dcache_page(page);
    - }
    -
    - kunmap_atomic(p, KM_BIO_SRC_IRQ);
    -
    - buf_off += page_copy;
    - sg_off += page_copy;
    - if (sg_off == PAGE_SIZE) {
    - sg_off = 0;
    - n++;
    - }
    - sg_copy -= page_copy;
    + unsigned int offset = 0;
    + struct sg_mapping_iter miter;
    +
    + sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
    +
    + while (sg_miter_next(&miter) && offset < buflen) {
    + unsigned int len;
    +
    + len = min(miter.length, buflen - offset);
    +
    + if (to_buffer)
    + memcpy(buf + offset, miter.addr, len);
    + else {
    + memcpy(miter.addr, buf + offset, len);
    + flush_kernel_dcache_page(miter.page);
    }

    - if (!buflen)
    - break;
    + offset += len;
    }

    - return buf_off;
    + sg_miter_stop(&miter);
    +
    + return offset;
    }

    /**

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  14. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    On Sat, 19 Jul 2008 23:03:35 +0900
    Tejun Heo wrote:

    > Pierre Ossman wrote:
    > > On Sat, 19 Jul 2008 11:12:17 +0900
    > > Tejun Heo wrote:
    > >
    > >> Oh... I see. How about adding sg_miter_consume(@miter, @bytes)? If the
    > >> function is never called, the whole chunk is assumed to be consumed. If
    > >> the function is called only @bytes are consumed.
    > >>

    > >
    > > Sounds reasonable. Care to make an independent patch so that I can
    > > continue my PIO hacking adventures?

    >
    > Sure thing. Here you go. :-)
    >
    > Subject: [PATCH 2.6.26] sg: reimplement sg mapping iterator
    >


    I've converted my code to use your implementation instead, and it seems
    to be working perfectly.

    How comfortable to you feel about your patch?
    This fixes a big problem in the sdhci driver where falling back on PIO
    (because of hw DMA bugs) would create lots of potential issues as the
    driver couldn't access highmem pages. I'd like to get this fix in for
    2.6.27, which means that your patch also needs to go in now.

    Rgds
    --
    -- Pierre Ossman

    WARNING: This correspondence is being monitored by the
    Swedish government. Make sure your server uses encryption
    for SMTP traffic and consider using PGP for end-to-end
    encryption.

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v2.0.9 (GNU/Linux)

    iEYEARECAAYFAkiDvuQACgkQ7b8eESbyJLjU/wCg8Fy/hfuE55g8HvUdDDtEKtui
    mWEAn1gDGsXeqGMD5chL1itu1ND1Rvrd
    =HwL4
    -----END PGP SIGNATURE-----


  15. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    Hello, Pierre.

    Pierre Ossman wrote:
    > I've converted my code to use your implementation instead, and it seems
    > to be working perfectly.


    Cool.

    > How comfortable to you feel about your patch?


    I think it should be okay (well, of course :-) and tested a few corner
    cases by modifying the copy function.

    > This fixes a big problem in the sdhci driver where falling back on PIO
    > (because of hw DMA bugs) would create lots of potential issues as the
    > driver couldn't access highmem pages. I'd like to get this fix in for
    > 2.6.27, which means that your patch also needs to go in now.


    I think it needs an ACK from Jens. Jens?

    --
    tejun
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  16. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    On Mon, 21 Jul 2008 09:38:36 +0900
    Tejun Heo wrote:

    >
    > I think it needs an ACK from Jens. Jens?
    >


    He seems to be on vacation. I sent him a review request for my original
    code a couple of weeks ago, and I haven't heard anything. marc.info
    also doesn't show anything since the 3rd. Odds are he won't be back
    during the merge window. :/

    --
    -- Pierre Ossman

    WARNING: This correspondence is being monitored by the
    Swedish government. Make sure your server uses encryption
    for SMTP traffic and consider using PGP for end-to-end
    encryption.

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v2.0.9 (GNU/Linux)

    iEYEARECAAYFAkiEc7sACgkQ7b8eESbyJLiuuQCcD7NCbqFggY tniBwAHBa8rL98
    gdQAoJ3NzNvWyflLOF4NoK6OkVCsSsUG
    =t/bj
    -----END PGP SIGNATURE-----


  17. Re: linux-next: Tree for July 16 (crash on quad core AMD)

    Pierre Ossman wrote:
    > On Mon, 21 Jul 2008 09:38:36 +0900
    > Tejun Heo wrote:
    >
    >> I think it needs an ACK from Jens. Jens?

    >
    > He seems to be on vacation. I sent him a review request for my original
    > code a couple of weeks ago, and I haven't heard anything. marc.info
    > also doesn't show anything since the 3rd. Odds are he won't be back
    > during the merge window. :/


    Right, I have a patchset waiting for his review too. Anyone knows when
    he'll be back?

    We can always back it out later but I don't think pushing stuff in w/o
    maintainer's ack is a good idea. :-(

    --
    tejun
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

+ Reply to Thread