While at it:

* Apply small fixes to messages (s/dma/DMA/, remove trailing '.', etc).

* Fix printk() call in ide_setup_pci_baseregs() to use KERN_INFO.

* Move printk() call from ide_pci_clear_simplex() to the caller.

* Cleanup do_ide_setup_pci_device() a bit.

* amd74xx.c: remove superfluous PCI device revision information.

* hpt366.c: fix two printk() calls in ->init_chipset to use KERN_INFO.

* pdc202xx_new.c: fix printk() call in ->init_chipset to use KERN_INFO.

* pdc202xx_old.c: fix driver message in pdc202xx_init_one().

* via82cxxx.c: fix driver warning message in via_init_one().

Signed-off-by: Bartlomiej Zolnierkiewicz
---
against ide tree

drivers/ide/pci/amd74xx.c | 11 ++--
drivers/ide/pci/generic.c | 4 -
drivers/ide/pci/hpt366.c | 31 +++++++-----
drivers/ide/pci/it821x.c | 11 ++--
drivers/ide/pci/pdc202xx_new.c | 21 ++++----
drivers/ide/pci/pdc202xx_old.c | 9 ++-
drivers/ide/pci/serverworks.c | 3 -
drivers/ide/pci/siimage.c | 7 +-
drivers/ide/pci/sis5513.c | 17 ++++---
drivers/ide/pci/trm290.c | 4 -
drivers/ide/pci/via82cxxx.c | 13 ++---
drivers/ide/setup-pci.c | 99 +++++++++++++++++++++++------------------
12 files changed, 131 insertions(+), 99 deletions(-)

Index: b/drivers/ide/pci/amd74xx.c
================================================== =================
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -129,9 +129,9 @@ static void __devinit amd7411_cable_dete
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
- printk(KERN_WARNING "%s: BIOS didn't set cable bits "
- "correctly. Enabling workaround.\n",
- name);
+ printk(KERN_WARNING "%s %s: BIOS didn't set cable bits "
+ "correctly. Enabling workaround.\n",
+ name, pci_name(dev));
amd_80w |= (1 << (1 - (i >> 4)));
}
}
@@ -280,9 +280,8 @@ static int __devinit amd74xx_probe(struc
d.udma_mask = ATA_UDMA5;
}

- printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
- d.name, pci_name(dev), dev->revision,
- amd_dma[fls(d.udma_mask) - 1]);
+ printk(KERN_INFO "%s %s: UDMA%s controller\n",
+ d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);

/*
* Determine the system bus clock.
Index: b/drivers/ide/pci/generic.c
================================================== =================
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -134,8 +134,8 @@ static int __devinit generic_init_one(st
u16 command;
pci_read_config_word(dev, PCI_COMMAND, &command);
if (!(command & PCI_COMMAND_IO)) {
- printk(KERN_INFO "Skipping disabled %s IDE "
- "controller.\n", d->name);
+ printk(KERN_INFO "%s %s: skipping disabled "
+ "controller\n", d->name, pci_name(dev));
goto out;
}
}
Index: b/drivers/ide/pci/hpt366.c
================================================== =================
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1044,8 +1044,8 @@ static unsigned int __devinit init_chips
if ((temp & 0xFFFFF000) != 0xABCDE000) {
int i;

- printk(KERN_WARNING "%s: no clock data saved by BIOS\n",
- name);
+ printk(KERN_WARNING "%s %s: no clock data saved by "
+ "BIOS\n", name, pci_name(dev));

/* Calculate the average value of f_CNT. */
for (temp = i = 0; i < 128; i++) {
@@ -1070,8 +1070,9 @@ static unsigned int __devinit init_chips
else
pci_clk = 66;

- printk(KERN_INFO "%s: DPLL base: %d MHz, f_CNT: %d, "
- "assuming %d MHz PCI\n", name, dpll_clk, f_cnt, pci_clk);
+ printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, "
+ "assuming %d MHz PCI\n", name, pci_name(dev),
+ dpll_clk, f_cnt, pci_clk);
} else {
u32 itr1 = 0;

@@ -1137,7 +1138,8 @@ static unsigned int __devinit init_chips
}

if (info->timings->clock_table[clock] == NULL) {
- printk(KERN_ERR "%s: unknown bus timing!\n", name);
+ printk(KERN_ERR "%s %s: unknown bus timing!\n",
+ name, pci_name(dev));
return -EIO;
}

@@ -1163,16 +1165,19 @@ static unsigned int __devinit init_chips
f_low += adjust >> 1;
}
if (adjust == 8) {
- printk(KERN_ERR "%s: DPLL did not stabilize!\n", name);
+ printk(KERN_ERR "%s %s: DPLL did not stabilize!\n",
+ name, pci_name(dev));
return -EIO;
}

- printk("%s: using %d MHz DPLL clock\n", name, dpll_clk);
+ printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n",
+ name, pci_name(dev), dpll_clk);
} else {
/* Mark the fact that we're not using the DPLL. */
dpll_clk = 0;

- printk("%s: using %d MHz PCI clock\n", name, pci_clk);
+ printk(KERN_INFO "%s %s: using %d MHz PCI clock\n",
+ name, pci_name(dev), pci_clk);
}

/* Store the clock frequencies. */
@@ -1357,7 +1362,8 @@ static void __devinit hpt374_init(struct
if (dev2->irq != dev->irq) {
/* FIXME: we need a core pci_set_interrupt() */
dev2->irq = dev->irq;
- printk(KERN_INFO "HPT374: PCI config space interrupt fixed\n");
+ printk(KERN_INFO "HPT374 %s: PCI config space interrupt "
+ "fixed\n", pci_name(dev2));
}
}

@@ -1392,8 +1398,8 @@ static int __devinit hpt36x_init(struct
pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);

if (pin1 != pin2 && dev->irq == dev2->irq) {
- printk(KERN_INFO "HPT36x: onboard version of chipset, "
- "pin1=%d pin2=%d\n", pin1, pin2);
+ printk(KERN_INFO "HPT36x %s: onboard version of chipset, "
+ "pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
return 1;
}

@@ -1591,7 +1597,8 @@ static int __devinit hpt366_init_one(str

dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL);
if (dyn_info == NULL) {
- printk(KERN_ERR "%s: out of memory!\n", d.name);
+ printk(KERN_ERR "%s %s: out of memory!\n",
+ d.name, pci_name(dev));
pci_dev_put(dev2);
return -ENOMEM;
}
Index: b/drivers/ide/pci/it821x.c
================================================== =================
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -563,7 +563,8 @@ static void __devinit init_hwif_it821x(i
idev->timing10 = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
if (idev->smart == 0)
- printk(KERN_WARNING "it821x: Revision 0x10, workarounds activated.\n");
+ printk(KERN_WARNING "it821x %s: revision 0x10, "
+ "workarounds activated\n", pci_name(dev));
}

if (idev->smart == 0) {
@@ -603,11 +604,13 @@ static unsigned int __devinit init_chips

/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
- printk(KERN_INFO "it8212: forcing bypass mode.\n");
+ printk(KERN_INFO "it821x %s: forcing bypass mode\n",
+ pci_name(dev));
it8212_disable_raid(dev);
}
pci_read_config_byte(dev, 0x50, &conf);
- printk(KERN_INFO "it821x: controller in %s mode.\n", mode[conf & 1]);
+ printk(KERN_INFO "it821x %s: controller in %s mode\n",
+ pci_name(dev), mode[conf & 1]);
return 0;
}

@@ -648,7 +651,7 @@ static int __devinit it821x_init_one(str

itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL);
if (itdevs == NULL) {
- printk(KERN_ERR "it821x: out of memory\n");
+ printk(KERN_ERR "it821x %s: out of memory\n", pci_name(dev));
return -ENOMEM;
}

Index: b/drivers/ide/pci/pdc202xx_new.c
================================================== =================
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -358,12 +358,13 @@ static unsigned int __devinit init_chips
* registers setting.
*/
pll_input = detect_pll_input_clock(dma_base);
- printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000);
+ printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n",
+ name, pci_name(dev), pll_input / 1000);

/* Sanity check */
if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
- printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n",
- name, pll_input);
+ printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!"
+ "\n", name, pci_name(dev), pll_input);
goto out;
}

@@ -399,7 +400,8 @@ static unsigned int __devinit init_chips
r = 0x00;
} else {
/* Invalid ratio */
- printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio);
+ printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n",
+ name, pci_name(dev), ratio);
goto out;
}

@@ -409,7 +411,8 @@ static unsigned int __devinit init_chips

if (unlikely(f < 0 || f > 127)) {
/* Invalid F */
- printk(KERN_ERR "%s: F[%d] invalid!\n", name, f);
+ printk(KERN_ERR "%s %s: F[%d] invalid!\n",
+ name, pci_name(dev), f);
goto out;
}

@@ -455,8 +458,8 @@ static struct pci_dev * __devinit pdc202

if (dev2->irq != dev->irq) {
dev2->irq = dev->irq;
- printk(KERN_INFO "PDC20270: PCI config space "
- "interrupt fixed\n");
+ printk(KERN_INFO "PDC20270 %s: PCI config space "
+ "interrupt fixed\n", pci_name(dev));
}

return dev2;
@@ -535,8 +538,8 @@ static int __devinit pdc202new_init_one(
bridge->vendor == PCI_VENDOR_ID_INTEL &&
(bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
- printk(KERN_INFO "PDC20276: attached to I2O RAID controller, "
- "skipping\n");
+ printk(KERN_INFO "PDC20276 %s: attached to I2O RAID controller,"
+ " skipping\n", pci_name(dev));
return -ENODEV;
}

Index: b/drivers/ide/pci/pdc202xx_old.c
================================================== =================
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -304,8 +304,8 @@ static void __devinit pdc202ata4_fixup_i
if (irq != irq2) {
pci_write_config_byte(dev,
(PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */
- printk(KERN_INFO "%s: PCI config space interrupt "
- "mirror fixed\n", name);
+ printk(KERN_INFO "%s %s: PCI config space interrupt "
+ "mirror fixed\n", name, pci_name(dev));
}
}
}
@@ -406,8 +406,9 @@ static int __devinit pdc202xx_init_one(s
bridge->vendor == PCI_VENDOR_ID_INTEL &&
(bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
- printk(KERN_INFO "ide: Skipping Promise PDC20265 "
- "attached to I2O RAID controller\n");
+ printk(KERN_INFO "pdc202xx_old %s: skipping Promise "
+ "PDC20265 attached to I2O RAID controller\n",
+ pci_name(dev));
return -ENODEV;
}
}
Index: b/drivers/ide/pci/serverworks.c
================================================== =================
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -188,7 +188,8 @@ static unsigned int __devinit init_chips
pci_read_config_dword(isa_dev, 0x64, &reg);
reg &= ~0x00002000; /* disable 600ns interrupt mask */
if(!(reg & 0x00004000))
- printk(KERN_DEBUG "%s: UDMA not BIOS enabled.\n", name);
+ printk(KERN_DEBUG "%s %s: UDMA not BIOS "
+ "enabled.\n", name, pci_name(dev));
reg |= 0x00004000; /* enable UDMA/33 support */
pci_write_config_dword(isa_dev, 0x64, reg);
}
Index: b/drivers/ide/pci/siimage.c
================================================== =================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -539,7 +539,8 @@ static unsigned int __devinit init_chips
{ "== 100", "== 133", "== 2X PCI", "DISABLED!" };

tmp >>= 4;
- printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]);
+ printk(KERN_INFO "%s %s: BASE CLOCK %s\n",
+ name, pci_name(dev), clk_str[tmp & 3]);
}

return 0;
@@ -779,8 +780,8 @@ static int __devinit siimage_init_one(st
* seem to get terminally confused in the PCI spaces.
*/
if (!request_mem_region(bar5, barsize, d.name)) {
- printk(KERN_WARNING "siimage: IDE controller MMIO "
- "ports not available.\n");
+ printk(KERN_WARNING "siimage %s: MMIO ports not "
+ "available\n", pci_name(dev));
} else {
ioaddr = ioremap(bar5, barsize);
if (ioaddr == NULL)
Index: b/drivers/ide/pci/sis5513.c
================================================== =================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -380,8 +380,9 @@ static int __devinit sis_find_family(str
}
pci_dev_put(host);

- printk(KERN_INFO "SIS5513: %s %s controller\n",
- SiSHostChipInfo[i].name, chipset_capability[chipset_family]);
+ printk(KERN_INFO "SIS5513 %s: %s %s controller\n",
+ pci_name(dev), SiSHostChipInfo[i].name,
+ chipset_capability[chipset_family]);
}

if (!chipset_family) { /* Belongs to pci-quirks */
@@ -396,7 +397,8 @@ static int __devinit sis_find_family(str
pci_write_config_dword(dev, 0x54, idemisc);

if (trueid == 0x5518) {
- printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n");
+ printk(KERN_INFO "SIS5513 %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
+ pci_name(dev));
chipset_family = ATA_133;

/* Check for 5513 compability mapping
@@ -405,7 +407,8 @@ static int __devinit sis_find_family(str
*/
if ((idemisc & 0x40000000) == 0) {
pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
- printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+ printk(KERN_INFO "SIS5513 %s: Switching to 5513 register mapping\n",
+ pci_name(dev));
}
}
}
@@ -429,10 +432,12 @@ static int __devinit sis_find_family(str
pci_dev_put(lpc_bridge);

if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
- printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
+ printk(KERN_INFO "SIS5513 %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
+ pci_name(dev));
chipset_family = ATA_133a;
} else {
- printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n");
+ printk(KERN_INFO "SIS5513 %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
+ pci_name(dev));
chipset_family = ATA_100;
}
}
Index: b/drivers/ide/pci/trm290.c
================================================== =================
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -245,10 +245,10 @@ static void __devinit init_hwif_trm290(i
u8 reg = 0;

if ((dev->class & 5) && cfg_base)
- printk(KERN_INFO "TRM290: chip");
+ printk(KERN_INFO "TRM290 %s: chip", pci_name(dev));
else {
cfg_base = 0x3df0;
- printk(KERN_INFO "TRM290: using default");
+ printk(KERN_INFO "TRM290 %s: using default", pci_name(dev));
}
printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
hwif->config_data = cfg_base;
Index: b/drivers/ide/pci/via82cxxx.c
================================================== =================
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -401,20 +401,19 @@ static int __devinit via_init_one(struct
*/
via_config = via_config_find(&isa);
if (!via_config->id) {
- printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
+ printk(KERN_WARNING "VP_IDE %s: unknown chipset, skipping\n",
+ pci_name(dev));
return -ENODEV;
}

/*
* Print the boot message.
*/
- printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
- "controller on pci%s\n",
- via_config->name, isa->revision,
+ printk(KERN_INFO "VP_IDE %s: VIA %s (rev %02x) IDE %sDMA%s\n",
+ pci_name(dev), via_config->name, isa->revision,
via_config->udma_mask ? "U" : "MW",
via_dma[via_config->udma_mask ?
- (fls(via_config->udma_mask) - 1) : 0],
- pci_name(dev));
+ (fls(via_config->udma_mask) - 1) : 0]);

pci_dev_put(isa);

@@ -454,7 +453,7 @@ static int __devinit via_init_one(struct

vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev) {
- printk(KERN_ERR "VP_IDE: out of memory \n");
+ printk(KERN_ERR "VP_IDE %s: out of memory \n", pci_name(dev));
return -ENOMEM;
}

Index: b/drivers/ide/setup-pci.c
================================================== =================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -39,17 +39,18 @@ static int ide_setup_pci_baseregs(struct
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
(progif & 5) != 5) {
if ((progif & 0xa) != 0xa) {
- printk(KERN_INFO "%s: device not capable of full "
- "native PCI mode\n", name);
+ printk(KERN_INFO "%s %s: device not capable of full "
+ "native PCI mode\n", name, pci_name(dev));
return -EOPNOTSUPP;
}
- printk("%s: placing both ports into native PCI mode\n", name);
+ printk(KERN_INFO "%s %s: placing both ports into native PCI "
+ "mode\n", name, pci_name(dev));
(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
(progif & 5) != 5) {
- printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted "
- "0x%04x, got 0x%04x\n",
- name, progif|5, progif);
+ printk(KERN_ERR "%s %s: rewrite of PROGIF failed, "
+ "wanted 0x%04x, got 0x%04x\n",
+ name, pci_name(dev), progif | 5, progif);
return -EOPNOTSUPP;
}
}
@@ -57,14 +58,14 @@ static int ide_setup_pci_baseregs(struct
}

#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
+static int ide_pci_clear_simplex(unsigned long dma_base, const char *name)
{
u8 dma_stat = inb(dma_base + 2);

outb(dma_stat & 0x60, dma_base + 2);
dma_stat = inb(dma_base + 2);
- if (dma_stat & 0x80)
- printk(KERN_INFO "%s: simplex device: DMA forced\n", name);
+
+ return (dma_stat & 0x80) ? 1 : 0;
}

/**
@@ -91,7 +92,8 @@ unsigned long ide_pci_dma_base(ide_hwif_
dma_base = pci_resource_start(dev, baridx);

if (dma_base == 0) {
- printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
+ printk(KERN_ERR "%s %s: DMA base is invalid\n",
+ d->name, pci_name(dev));
return 0;
}
}
@@ -105,13 +107,16 @@ EXPORT_SYMBOL_GPL(ide_pci_dma_base);

int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 dma_stat;

if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
goto out;

if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
- ide_pci_clear_simplex(hwif->dma_base, d->name);
+ if (ide_pci_clear_simplex(hwif->dma_base, d->name))
+ printk(KERN_INFO "%s %s: simplex device: DMA forced\n",
+ d->name, pci_name(dev));
goto out;
}

@@ -127,7 +132,8 @@ int ide_pci_check_simplex(ide_hwif_t *hw
*/
dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
- printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
+ printk(KERN_INFO "%s %s: simplex device: DMA disabled\n",
+ d->name, pci_name(dev));
return -1;
}
out:
@@ -149,8 +155,8 @@ int ide_pci_set_master(struct pci_dev *d

if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
(pcicmd & PCI_COMMAND_MASTER) == 0) {
- printk(KERN_ERR "%s: error updating PCICMD on %s\n",
- name, pci_name(dev));
+ printk(KERN_ERR "%s %s: error updating PCICMD\n",
+ name, pci_name(dev));
return -EIO;
}
}
@@ -162,9 +168,9 @@ EXPORT_SYMBOL_GPL(ide_pci_set_master);

void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
{
- printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at "
- " PCI slot %s\n", d->name, dev->vendor, dev->device,
- dev->revision, pci_name(dev));
+ printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n",
+ d->name, pci_name(dev),
+ dev->vendor, dev->device, dev->revision);
}
EXPORT_SYMBOL_GPL(ide_setup_pci_noise);

@@ -189,11 +195,12 @@ static int ide_pci_enable(struct pci_dev
if (pci_enable_device(dev)) {
ret = pci_enable_device_io(dev);
if (ret < 0) {
- printk(KERN_WARNING "%s: (ide_setup_pci_device "
- "Could not enable device.\n", d->name);
+ printk(KERN_WARNING "%s %s: couldn't enable device\n",
+ d->name, pci_name(dev));
goto out;
}
- printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name);
+ printk(KERN_WARNING "%s %s: BIOS configuration fixed\n",
+ d->name, pci_name(dev));
}

/*
@@ -203,7 +210,8 @@ static int ide_pci_enable(struct pci_dev
*/
ret = pci_set_dma_mask(dev, DMA_32BIT_MASK);
if (ret < 0) {
- printk(KERN_ERR "%s: can't set dma mask\n", d->name);
+ printk(KERN_ERR "%s %s: can't set DMA mask\n",
+ d->name, pci_name(dev));
goto out;
}

@@ -221,7 +229,8 @@ static int ide_pci_enable(struct pci_dev

ret = pci_request_selected_regions(dev, bars, d->name);
if (ret < 0)
- printk(KERN_ERR "%s: can't reserve resources\n", d->name);
+ printk(KERN_ERR "%s %s: can't reserve resources\n",
+ d->name, pci_name(dev));
out:
return ret;
}
@@ -247,15 +256,18 @@ static int ide_pci_configure(struct pci_
*/
if (ide_setup_pci_baseregs(dev, d->name) ||
pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) {
- printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name);
+ printk(KERN_INFO "%s %s: device disabled (BIOS)\n",
+ d->name, pci_name(dev));
return -ENODEV;
}
if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
- printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+ printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+ d->name, pci_name(dev));
return -EIO;
}
if (!(pcicmd & PCI_COMMAND_IO)) {
- printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name);
+ printk(KERN_ERR "%s %s: unable to enable IDE controller\n",
+ d->name, pci_name(dev));
return -ENXIO;
}
return 0;
@@ -311,8 +323,9 @@ static int ide_hw_configure(struct pci_d
if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
if (ide_pci_check_iomem(dev, d, 2 * port) ||
ide_pci_check_iomem(dev, d, 2 * port + 1)) {
- printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported "
- "as MEM for port %d!\n", d->name, port);
+ printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are "
+ "reported as MEM for port %d!\n",
+ d->name, pci_name(dev), port);
return -EINVAL;
}

@@ -325,8 +338,8 @@ static int ide_hw_configure(struct pci_d
}

if (!base || !ctl) {
- printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
- d->name, port);
+ printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n",
+ d->name, pci_name(dev), port);
return -EINVAL;
}

@@ -414,14 +427,16 @@ static int ide_setup_pci_controller(stru

ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
if (ret < 0) {
- printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+ printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+ d->name, pci_name(dev));
goto out;
}
if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */
ret = ide_pci_configure(dev, d);
if (ret < 0)
goto out;
- printk(KERN_INFO "%s: device enabled (Linux)\n", d->name);
+ printk(KERN_INFO "%s %s: device enabled (Linux)\n",
+ d->name, pci_name(dev));
}

out:
@@ -460,7 +475,8 @@ void ide_pci_setup_ports(struct pci_dev

if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
(tmp & e->mask) != e->val)) {
- printk(KERN_INFO "%s: IDE port disabled\n", d->name);
+ printk(KERN_INFO "%s %s: IDE port disabled\n",
+ d->name, pci_name(dev));
continue; /* port not enabled */
}

@@ -506,18 +522,15 @@ static int do_ide_setup_pci_device(struc
/* Is it an "IDE storage" device in non-PCI mode? */
if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) {
if (noisy)
- printk(KERN_INFO "%s: not 100%% native mode: "
- "will probe irqs later\n", d->name);
+ printk(KERN_INFO "%s %s: not 100%% native mode: will "
+ "probe irqs later\n", d->name, pci_name(dev));
pciirq = ret;
- } else if (!pciirq) {
- if (noisy)
- printk(KERN_WARNING "%s: bad irq (%d): will probe later\n",
- d->name, pciirq);
- pciirq = 0;
- } else {
- if (noisy)
- printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
- d->name, pciirq);
+ } else if (!pciirq && noisy) {
+ printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n",
+ d->name, pci_name(dev), pciirq);
+ } else if (noisy) {
+ printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n",
+ d->name, pci_name(dev), pciirq);
}

ret = pciirq;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/