PROBLEM: Kernel panic - Kernel

This is a discussion on PROBLEM: Kernel panic - Kernel ; Hi, I have no idea where to report and didnt find the REPORTING-BUGS file in kernel tree so i send here. Hope it helps in some way. - Svein - Kernel panic Linux version 2.6.9-55.ELsmp (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 3.4.6 20060404 ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: PROBLEM: Kernel panic

  1. PROBLEM: Kernel panic

    Hi, I have no idea where to report and didnt find the REPORTING-BUGS
    file in kernel tree so i send here. Hope it helps in some way.

    - Svein

    - Kernel panic

    Linux version 2.6.9-55.ELsmp (brewbuilder@ls20-bc2-14.build.redhat.com)
    (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20
    17:03:35 EDT 2007

    Jul 2 07:52:56 web kernel: ------------[ cut here ]------------
    Jul 2 07:52:56 web kernel: kernel BUG at fs/jbd/journal.c:576!
    Jul 2 07:52:56 web kernel: invalid operand: 0000 [#1]
    Jul 2 07:52:56 web kernel: SMP
    Jul 2 07:52:56 web kernel: Modules linked in: autofs4 i2c_dev i2c_core
    sunrpc ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables sr_mod
    ide_scsi md5 ipv6 joydev button battery ac
    uhci_hcd ehci_hcd hw_random shpchp e1000(U) floppy ata_piix libata sg
    dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod megaraid_mbox megaraid_mm
    sd_mod scsi_mod
    Jul 2 07:52:56 web kernel: CPU: 3
    Jul 2 07:52:56 web kernel: EIP: 0060:[] Not tainted VLI
    Jul 2 07:52:56 web kernel: EFLAGS: 00010216 (2.6.9-55.ELsmp)
    Jul 2 07:52:56 web kernel: EIP is at journal_next_log_block+0x39/0x83 [jbd]
    Jul 2 07:52:56 web kernel: eax: 00000060 ebx: f7e00800 ecx:
    d1a8edcc edx: f8887205
    Jul 2 07:52:56 web kernel: esi: d87d418c edi: f7e00814 ebp:
    d1a8ee14 esp: d1a8edc8
    Jul 2 07:52:56 web kernel: ds: 007b es: 007b ss: 0068
    Jul 2 07:52:56 web kernel: Process kjournald (pid: 2762,
    threadinfo=d1a8e000 task=f6c4c2b0)
    Jul 2 07:52:56 web kernel: Stack: f8887205 f888602f f88871f4 00000240
    f888728f f7e00800 d87d418c ca53e23c
    Jul 2 07:52:56 web kernel: f7d6f900 f888190f 00000000 00000000
    00000e6c d87d4194 00000000 00000030
    Jul 2 07:52:56 web kernel: dc6c917c f7e00800 e45187dc 00001a2e
    00000000 f6c4c2b0 c012052d d1a8ee44
    Jul 2 07:52:56 web kernel: Call Trace:
    Jul 2 07:52:56 web kernel: []
    journal_commit_transaction+0x6d0/0xfd5 [jbd]
    Jul 2 07:52:56 web kernel: [] autoremove_wake_function+0x0/0x2d
    Jul 2 07:52:56 web kernel: [] autoremove_wake_function+0x0/0x2d
    Jul 2 07:52:56 web kernel: [] kjournald+0xc7/0x219 [jbd]
    Jul 2 07:52:56 web kernel: [] autoremove_wake_function+0x0/0x2d
    Jul 2 07:52:56 web kernel: [] autoremove_wake_function+0x0/0x2d
    Jul 2 07:52:56 web kernel: [] schedule_tail+0x31/0xae
    Jul 2 07:52:56 web kernel: [] commit_timeout+0x0/0x5 [jbd]
    Jul 2 07:52:56 web kernel: [] kjournald+0x0/0x219 [jbd]
    Jul 2 07:52:56 web kernel: [] kernel_thread_helper+0x5/0xb
    Jul 2 07:52:56 web kernel: Code: 51 03 a5 c7 83 bb c4 00 00 00 01 77 29
    68 8f 72 88 f8 68 40 02 00 00 68 f4 71 88 f8 68 2f 60 88 f8 68 05 72 88
    f8 e8 01 e2 89 c7 <0f> 0b 40 02 f4 71 88 f8 83 c4 14 ff 8b c4 00 00 00
    8b b3 bc 00
    Jul 2 07:52:56 web kernel: <0>Fatal exception: panic in 5 seconds


    * /proc/cpuinfo:
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 15
    model : 4
    model name : Intel(R) Xeon(TM) CPU 3.40GHz
    stepping : 10
    cpu MHz : 3392.243
    cache size : 2048 KB
    physical id : 0
    siblings : 2
    core id : 0
    cpu cores : 1
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 5
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
    pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
    constant_tsc pni monitor ds_cpl est cid xtpr
    bogomips : 6787.31

    processor : 1
    vendor_id : GenuineIntel
    cpu family : 15
    model : 4
    model name : Intel(R) Xeon(TM) CPU 3.40GHz
    stepping : 10
    cpu MHz : 3392.243
    cache size : 2048 KB
    physical id : 0
    siblings : 2
    core id : 0
    cpu cores : 1
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 5
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
    pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
    constant_tsc pni monitor ds_cpl est cid xtpr
    bogomips : 6783.48

    processor : 2
    vendor_id : GenuineIntel
    cpu family : 15
    model : 4
    model name : Intel(R) Xeon(TM) CPU 3.40GHz
    stepping : 10
    cpu MHz : 3392.243
    cache size : 2048 KB
    physical id : 3
    siblings : 2
    core id : 3
    cpu cores : 1
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 5
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
    pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
    constant_tsc pni monitor ds_cpl est cid xtpr
    bogomips : 6783.76

    processor : 3
    vendor_id : GenuineIntel
    cpu family : 15
    model : 4
    model name : Intel(R) Xeon(TM) CPU 3.40GHz
    stepping : 10
    cpu MHz : 3392.243
    cache size : 2048 KB
    physical id : 3
    siblings : 2
    core id : 3
    cpu cores : 1
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 5
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
    pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
    constant_tsc pni monitor ds_cpl est cid xtpr
    bogomips : 6783.50

    */proc/modules:
    autofs4 25285 0 - Live 0xf8b93000
    i2c_dev 14529 0 - Live 0xf8b8e000
    i2c_core 26049 1 i2c_dev, Live 0xf8b86000
    sunrpc 143909 1 - Live 0xf8ba5000
    ipt_REJECT 10689 1 - Live 0xf8a11000
    ipt_state 5953 25 - Live 0xf8a09000
    ip_conntrack 46085 1 ipt_state, Live 0xf8a15000
    iptable_filter 6977 1 - Live 0xf8870000
    ip_tables 22721 3 ipt_REJECT,ipt_state,iptable_filter, Live 0xf89f7000
    sr_mod 20965 0 - Live 0xf89b8000
    ide_scsi 20553 0 [permanent], Live 0xf89b1000
    md5 8129 1 - Live 0xf88e5000
    ipv6 243425 69 - Live 0xf8a3f000
    joydev 14465 0 - Live 0xf88f2000
    button 10705 0 - Live 0xf88dd000
    battery 12997 0 - Live 0xf88f7000
    ac 8901 0 - Live 0xf88e1000
    uhci_hcd 33241 0 - Live 0xf88e8000
    ehci_hcd 32325 0 - Live 0xf88aa000
    hw_random 9685 0 - Live 0xf889c000
    shpchp 85061 0 - Live 0xf89e1000
    e1000 95060 0 - Live 0xf8927000
    floppy 58193 0 - Live 0xf8917000
    ata_piix 19141 0 - Live 0xf88a4000
    libata 106141 1 ata_piix, Live 0xf88fc000
    sg 38369 0 - Live 0xf88d2000
    dm_snapshot 21093 0 - Live 0xf888f000
    dm_zero 6337 0 - Live 0xf886b000
    dm_mirror 31173 0 - Live 0xf8876000
    ext3 119113 8 - Live 0xf88b3000
    jbd 59609 1 ext3, Live 0xf887f000
    dm_mod 64617 17 dm_snapshot,dm_zero,dm_mirror, Live 0xf882f000
    megaraid_mbox 37329 4 - Live 0xf8860000
    megaraid_mm 17777 1 megaraid_mbox, Live 0xf8829000
    sd_mod 20545 7 - Live 0xf8822000
    scsi_mod 119757 6 sr_mod,ide_scsi,libata,sg,megaraid_mbox,sd_mod, Live
    0xf8841000

    */proc/ioports:
    0000-001f : dma1
    0020-0021 : pic1
    0040-0043 : timer0
    0050-0053 : timer1
    0060-006f : keyboard
    0070-0077 : rtc
    0080-008f : dma page reg
    00a0-00a1 : pic2
    00c0-00df : dma2
    00f0-00ff : fpu
    01f0-01f7 : ide2
    03c0-03df : vga+
    03f6-03f6 : ide2
    03f8-03ff : serial
    0800-087f : 0000:00:1f.0
    0800-0803 : PM1a_EVT_BLK
    0804-0805 : PM1a_CNT_BLK
    0808-080b : PM_TMR
    0828-082f : GPE0_BLK
    0880-08bf : 0000:00:1f.0
    bca0-bcbf : 0000:00:1d.2
    bca0-bcbf : uhci_hcd
    bcc0-bcdf : 0000:00:1d.1
    bcc0-bcdf : uhci_hcd
    bce0-bcff : 0000:00:1d.0
    bce0-bcff : uhci_hcd
    c800-c8ff : 0000:0b:0d.0
    cc70-cc7f : 0000:0b:06.0
    cc80-ccbf : 0000:0b:05.1
    cc80-cc87 : serial
    ccd0-ccd3 : 0000:0b:06.0
    ccd8-ccdf : 0000:0b:06.0
    cce4-cce7 : 0000:0b:06.0
    cce8-ccef : 0000:0b:05.0
    ccf0-ccf7 : 0000:0b:06.0
    ccf8-ccff : 0000:0b:05.0
    d000-efff : PCI Bus #05
    d000-dfff : PCI Bus #07
    dcc0-dcff : 0000:07:08.0
    dcc0-dcff : e1000
    e000-efff : PCI Bus #06
    ecc0-ecff : 0000:06:07.0
    ecc0-ecff : e1000
    fc00-fc0f : 0000:00:1f.1
    fc00-fc07 : ide2

    * /proc/iomem:
    00000000-0009ffff : System RAM
    000a0000-000bffff : Video RAM area
    000c0000-000c7fff : Video ROM
    000cb000-000cbfff : Adapter ROM
    000cc000-000ccfff : Adapter ROM
    000cd000-000d0bff : Adapter ROM
    000d1000-000d31ff : Adapter ROM
    000d3800-000d3dff : Adapter ROM
    000f0000-000fffff : System ROM
    00100000-bffbffff : System RAM
    00100000-002d6bdb : Kernel code
    002d6bdc-0039537f : Kernel data
    bffc0000-bffcfbff : ACPI Tables
    bffcfc00-bfffefff : reserved
    c0000000-c00003ff : 0000:00:1f.1
    c8000000-cfffffff : 0000:0b:0d.0
    d7f00000-d7f7ffff : 0000:0b:05.1
    d7fff000-d7ffffff : 0000:0b:05.0
    d8000000-d80fffff : PCI Bus #01
    d8000000-d80fffff : PCI Bus #02
    d80f0000-d80fffff : 0000:02:0e.0
    d80f0000-d80fffff : MegaRAID: LSI Logic Corporation
    df4e0000-df4effff : 0000:0b:0d.0
    df4fec00-df4fecff : 0000:0b:06.0
    df4fec00-df4fecff : SiI680
    df4ff000-df4fffff : 0000:0b:05.1
    df600000-df6fffff : PCI Bus #08
    df700000-dfbfffff : PCI Bus #05
    df800000-df9fffff : PCI Bus #07
    df8e0000-df8fffff : 0000:07:08.0
    df8e0000-df8fffff : e1000
    dfa00000-dfbfffff : PCI Bus #06
    dfae0000-dfafffff : 0000:06:07.0
    dfae0000-dfafffff : e1000
    dfc00000-dfefffff : PCI Bus #01
    dfd00000-dfefffff : PCI Bus #02
    dfdc0000-dfdfffff : 0000:02:0e.0
    dfdc0000-dfdfffff : MegaRAID: LSI Logic Corporation
    dff00000-dff003ff : 0000:00:1d.7
    dff00000-dff003ff : ehci_hcd
    e0000000-fec8ffff : reserved
    fed00000-fed003ff : reserved
    fee00000-fee0ffff : reserved
    ffb00000-ffffffff : reserved

    *PCI Info:
    00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 09)
    Subsystem: Dell: Unknown device 016d
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0
    Capabilities: [40] Vendor Specific Information

    00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port
    A (rev 09) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: dfc00000-dfefffff
    Prefetchable memory behind bridge: 00000000d8000000-00000000d8000000
    Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
    Address: fee00000 Data: 0000
    Capabilities: [64] Express Root Port (Slot-) IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 2
    Link: Latency L0s <4us, L1 unlimited
    Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [100] Advanced Error Reporting

    00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B
    (rev 09) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
    Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
    Address: fee00000 Data: 0000
    Capabilities: [64] Express Root Port (Slot-) IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 4
    Link: Latency L0s <4us, L1 unlimited
    Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [100] Advanced Error Reporting
    00:05.0 PCI bridge: Intel Corporation E7520 PCI Express Port B1 (rev 09)
    (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
    I/O behind bridge: 0000d000-0000efff
    Memory behind bridge: df700000-dfbfffff
    Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
    Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
    Address: fee00000 Data: 0000
    Capabilities: [64] Express Root Port (Slot-) IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 5
    Link: Latency L0s <4us, L1 unlimited
    Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x4
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [100] Advanced Error Reporting

    00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 09)
    (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=00, secondary=08, subordinate=0a, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: df600000-df6fffff
    Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
    Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
    Address: fee00000 Data: 0000
    Capabilities: [64] Express Root Port (Slot-) IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 6
    Link: Latency L0s <4us, L1 unlimited
    Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [100] Advanced Error Reporting
    00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
    UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell: Unknown device 016d
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 0
    Interrupt: pin A routed to IRQ 169
    Region 4: I/O ports at bce0 [size=32]

    00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
    UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell: Unknown device 016d
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 0
    Interrupt: pin B routed to IRQ 177
    Region 4: I/O ports at bcc0 [size=32]

    00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
    UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell: Unknown device 016d
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 0
    Interrupt: pin C routed to IRQ 185
    Region 4: I/O ports at bca0 [size=32]

    00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
    EHCI Controller (rev 02) (prog-if 20 [EHCI])
    Subsystem: Dell: Unknown device 016d
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 0
    Interrupt: pin D routed to IRQ 193
    Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port

    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if
    00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0
    Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=32
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: df400000-df5fffff
    Prefetchable memory behind bridge: c8000000-d7ffffff
    Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

    00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
    Interface Bridge (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+
    Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 0

    00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
    Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Dell: Unknown device 016d
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 0
    Interrupt: pin A routed to IRQ 0
    Region 0: I/O ports at
    Region 1: I/O ports at
    Region 2: I/O ports at
    Region 3: I/O ports at
    Region 4: I/O ports at fc00 [size=16]
    Region 5: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
    01:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor
    (A-Segment Bridge) (rev 06) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: dfd00000-dfefffff
    Prefetchable memory behind bridge: 00000000d8000000-00000000d8000000
    Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
    Link: Latency L0s unlimited, L1 unlimited
    Link: ASPM Disabled CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [6c] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d8] PCI-X bridge device.
    Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=133MHz
    Status: Bus=1 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
    : Upstream: Capacity=65535, Commitment Limit=65535
    : Downstream: Capacity=65535, Commitment Limit=65535
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [300] Power Budgeting

    01:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor
    (B-Segment Bridge) (rev 06) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=01, secondary=03, subordinate=03, sec-latency=64
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
    Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
    Link: Latency L0s unlimited, L1 unlimited
    Link: ASPM Disabled CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [6c] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d8] PCI-X bridge device.
    Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=133MHz
    Status: Bus=1 Dev=0 Func=2 64bit- 133MHz- SCD- USC-, SCO-, SRD-
    : Upstream: Capacity=65535, Commitment Limit=65535
    : Downstream: Capacity=65535, Commitment Limit=65535
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [300] Power Budgeting
    02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4
    (rev 06)
    Subsystem: Dell PowerEdge Expandable RAID Controller 4e/Di
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
    Stepping+ SERR+ FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 64 (32000ns min), Cache Line Size 10
    Interrupt: pin A routed to IRQ 201
    Region 0: Memory at d80f0000 (32-bit, prefetchable) [size=64K]
    Region 2: Memory at dfdc0000 (32-bit, non-prefetchable) [size=256K]
    Expansion ROM at dfe00000 [disabled] [size=128K]
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [e0] PCI-X non-bridge device.
    Command: DPERE- ERO- RBC=0 OST=3
    Status: Bus=2 Dev=14 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge,
    DMMRBC=1, DMOST=3, DMCRS=1, RSCEM-

    05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
    A (rev 09) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: dfa00000-dfbfffff
    Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
    Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
    Link: Latency L0s unlimited, L1 unlimited
    Link: ASPM Disabled CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [6c] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d8] PCI-X bridge device.
    Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=conv
    Status: Bus=5 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
    : Upstream: Capacity=65535, Commitment Limit=65535
    : Downstream: Capacity=65535, Commitment Limit=65535
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [300] Power Budgeting
    05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
    B (rev 09) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=05, secondary=07, subordinate=07, sec-latency=32
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: df800000-df9fffff
    Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
    Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
    Link: Latency L0s unlimited, L1 unlimited
    Link: ASPM Disabled CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [6c] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d8] PCI-X bridge device.
    Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=conv
    Status: Bus=5 Dev=0 Func=2 64bit- 133MHz- SCD- USC-, SCO-, SRD-
    : Upstream: Capacity=65535, Commitment Limit=65535
    : Downstream: Capacity=65535, Commitment Limit=65535
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [300] Power Budgeting

    06:07.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
    Controller (rev 05)
    Subsystem: Dell PowerEdge 1850
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
    Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 32 (63750ns min), Cache Line Size 10
    Interrupt: pin A routed to IRQ 209
    Region 0: Memory at dfae0000 (32-bit, non-prefetchable) [size=128K]
    Region 2: I/O ports at ecc0 [size=64]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [e4] PCI-X non-bridge device.
    Command: DPERE- ERO+ RBC=0 OST=0
    Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple,
    DMMRBC=2, DMOST=0, DMCRS=0, RSCEM-

    07:08.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
    Controller (rev 05)
    Subsystem: Dell PowerEdge 1850
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
    Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 32 (63750ns min), Cache Line Size 10
    Interrupt: pin A routed to IRQ 217
    Region 0: Memory at df8e0000 (32-bit, non-prefetchable) [size=128K]
    Region 2: I/O ports at dcc0 [size=64]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [e4] PCI-X non-bridge device.
    Command: DPERE- ERO+ RBC=0 OST=0
    Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple,
    DMMRBC=2, DMOST=0, DMCRS=0, RSCEM-
    08:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
    A (rev 09) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=08, secondary=09, subordinate=09, sec-latency=64
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
    Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
    Link: Latency L0s unlimited, L1 unlimited
    Link: ASPM Disabled CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [6c] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d8] PCI-X bridge device.
    Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=133MHz
    Status: Bus=8 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
    : Upstream: Capacity=65535, Commitment Limit=65535
    : Downstream: Capacity=65535, Commitment Limit=65535
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [300] Power Budgeting

    08:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
    B (rev 09) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    SERR- Latency: 0, Cache Line Size 10
    Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=64
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
    Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
    Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
    Link: Latency L0s unlimited, L1 unlimited
    Link: ASPM Disabled CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x8
    Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [6c] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [d8] PCI-X bridge device.
    Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=133MHz
    Status: Bus=8 Dev=0 Func=2 64bit- 133MHz- SCD- USC-, SCO-, SRD-
    : Upstream: Capacity=65535, Commitment Limit=65535
    : Downstream: Capacity=65535, Commitment Limit=65535
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [300] Power Budgeting
    0b:05.0 Class ff00: Dell Remote Access Card 4 Daughter Card
    Subsystem: Dell Remote Access Card 4 Daughter Card
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
    Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 32, Cache Line Size 10
    Interrupt: pin A routed to IRQ 225
    Region 0: Memory at d7fff000 (32-bit, prefetchable) [size=4K]
    Region 1: I/O ports at ccf8 [size=8]
    Region 2: I/O ports at cce8 [size=8]
    Expansion ROM at df500000 [disabled] [size=64K]
    Capabilities: [48] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0b:05.1 Class ff00: Dell Remote Access Card 4 Daughter Card Virtual UART
    Subsystem: Dell Remote Access Card 4 Daughter Card Virtual UART
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Interrupt: pin B routed to IRQ 233
    Region 0: Memory at df4ff000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at cc80 [size=64]
    Region 2: Memory at d7f00000 (32-bit, prefetchable) [size=512K]
    Capabilities: [48] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0b:05.2 Class ff00: Dell Remote Access Card 4 Daughter Card SMIC interface
    Subsystem: Dell Remote Access Card 4 Daughter Card SMIC interface
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Capabilities: [48] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0b:06.0 IDE interface: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host
    Controller (rev 02) (prog-if 85 [Master SecO PriO])
    Subsystem: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 32, Cache Line Size 01
    Interrupt: pin A routed to IRQ 193
    Region 0: I/O ports at ccf0 [size=8]
    Region 1: I/O ports at cce4 [size=4]
    Region 2: I/O ports at ccd8 [size=8]
    Region 3: I/O ports at ccd0 [size=4]
    Region 4: I/O ports at cc70 [size=16]
    Region 5: Memory at df4fec00 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at df500000 [disabled] [size=512K]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    0b:0d.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY
    [Radeon 7000/VE] (prog-if 00 [VGA])
    Subsystem: Dell: Unknown device 016d
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
    Stepping+ SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    SERR- Latency: 32 (2000ns min), Cache Line Size 10
    Interrupt: pin A routed to IRQ 185
    Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
    Region 1: I/O ports at c800 [size=256]
    Region 2: Memory at df4e0000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  2. Re: PROBLEM: Kernel panic

    On Wed, Jul 02, 2008 at 08:49:56AM +0200, Svein Larsen wrote:
    > Hi, I have no idea where to report and didnt find the REPORTING-BUGS file
    > in kernel tree so i send here. Hope it helps in some way.
    >
    > - Svein
    >
    > Linux version 2.6.9-55.ELsmp (brewbuilder@ls20-bc2-14.build.redhat.com)

    You should report this to Red Hat.

    Regards,
    Frederik
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

+ Reply to Thread