[PATCH] Add btgpio driver - Kernel

This is a discussion on [PATCH] Add btgpio driver - Kernel ; This adds the btgpio driver. The purpose of the btgpio driver is to export all of the 24 GPIO pins available on Brooktree 8xx chips to the kernel GPIO infrastructure. This makes it possible to use a physically modified BT8xx ...

+ Reply to Thread
Results 1 to 7 of 7

Thread: [PATCH] Add btgpio driver

  1. [PATCH] Add btgpio driver

    This adds the btgpio driver.
    The purpose of the btgpio driver is to export all of the 24 GPIO pins
    available on Brooktree 8xx chips to the kernel GPIO infrastructure.

    This makes it possible to use a physically modified BT8xx card as
    cheap digital GPIO card.

    Signed-off-by: Michael Buesch

    ---

    Andrew, can we queue this for inclusion into 2.6.27?
    I'm not sure how linux-next works, yet. My favourite web search engine
    also didn't find anything useful on how to submit stuff for linux-next.
    What are the gateway people and mailinglists for linux-next?

    A patch adding a Documentation/ file with some hardware descriptions
    will follow this one (once I got to write it

    I could not find a GPIO maintainer. Neither in the MAINTAINERS file
    nor in any GPIO source file. So I didn't CC any GPIO guy, as I don't
    know who that is.


    Index: linux-2.6/drivers/gpio/Kconfig
    ================================================== =================
    --- linux-2.6.orig/drivers/gpio/Kconfig 2008-07-01 01:53:19.000000000 +0200
    +++ linux-2.6/drivers/gpio/Kconfig 2008-07-01 01:53:29.000000000 +0200
    @@ -61,6 +61,24 @@ config GPIO_PCF857X
    This driver provides an in-kernel interface to those GPIOs using
    platform-neutral GPIO calls.

    +comment "PCI GPIO expanders:"
    +
    +config GPIO_BT8XX
    + tristate "BT8XX GPIO abuser"
    + depends on PCI && VIDEO_BT848=n
    + help
    + The BT8xx frame grabber chip has 24 GPIO pins than can be abused
    + as a cheap PCI GPIO card.
    +
    + This chip can be found on Miro, Hauppauge and STB TV-cards.
    +
    + The card needs to be physically altered for using it as a
    + GPIO card. For more information on how to build a GPIO card
    + from a BT8xx TV card, see the following link:
    + http://bu3sch.de/btgpio.php
    +
    + If unsure, say N.
    +
    comment "SPI GPIO expanders:"

    config GPIO_MCP23S08
    Index: linux-2.6/drivers/gpio/Makefile
    ================================================== =================
    --- linux-2.6.orig/drivers/gpio/Makefile 2008-07-01 01:53:19.000000000 +0200
    +++ linux-2.6/drivers/gpio/Makefile 2008-07-01 01:53:29.000000000 +0200
    @@ -7,3 +7,4 @@ obj-$(CONFIG_HAVE_GPIO_LIB) += gpiolib.o
    obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
    obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
    obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
    +obj-$(CONFIG_GPIO_BT8XX) += btgpio.o
    Index: linux-2.6/drivers/gpio/btgpio.c
    ================================================== =================
    --- /dev/null 1970-01-01 00:00:00.000000000 +0000
    +++ linux-2.6/drivers/gpio/btgpio.c 2008-07-01 01:53:29.000000000 +0200
    @@ -0,0 +1,346 @@
    +/*
    +
    + bt8xx GPIO abuser
    +
    + Copyright (C) 2008 Michael Buesch
    +
    + Please do _only_ contact the people listed _above_ with issues related to this driver.
    + All the other people listed below are not related to this driver. Their names
    + are only here, because this driver is derived from the bt848 driver.
    +
    +
    + Derived from the bt848 driver:
    +
    + Copyright (C) 1996,97,98 Ralph Metzler
    + & Marcus Metzler
    + (c) 1999-2002 Gerd Knorr
    +
    + some v4l2 code lines are taken from Justin's bttv2 driver which is
    + (c) 2000 Justin Schoeman
    +
    + V4L1 removal from:
    + (c) 2005-2006 Nickolay V. Shmyrev
    +
    + Fixes to be fully V4L2 compliant by
    + (c) 2006 Mauro Carvalho Chehab
    +
    + Cropping and overscan support
    + Copyright (C) 2005, 2006 Michael H. Schimek
    + Sponsored by OPQ Systems AB
    +
    + This program is free software; you can redistribute it and/or modify
    + it under the terms of the GNU General Public License as published by
    + the Free Software Foundation; either version 2 of the License, or
    + (at your option) any later version.
    +
    + This program is distributed in the hope that it will be useful,
    + but WITHOUT ANY WARRANTY; without even the implied warranty of
    + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    + GNU General Public License for more details.
    +
    + You should have received a copy of the GNU General Public License
    + along with this program; if not, write to the Free Software
    + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
    +*/
    +
    +#include
    +#include
    +#include
    +#include
    +
    +/* Steal the hardware definitions from the bttv driver. */
    +#include "../media/video/bt8xx/bt848.h"
    +
    +
    +#define BTGPIO_NR_GPIOS 24 /* We have 24 GPIO pins */
    +
    +
    +struct btgpio {
    + spinlock_t lock;
    +
    + void __iomem *mmio;
    + struct pci_dev *pdev;
    + struct gpio_chip gpio;
    +
    +#ifdef CONFIG_PM
    + u32 saved_outen;
    + u32 saved_data;
    +#endif
    +};
    +
    +#define bgwrite(dat,adr) writel((dat), bg->mmio+(adr))
    +#define bgread(adr) readl(bg->mmio+(adr))
    +
    +
    +static int modparam_gpiobase = -1/* dynamic */;
    +module_param_named(gpiobase, modparam_gpiobase, int, 0444);
    +MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
    +
    +
    +static int btgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
    +{
    + struct btgpio *bg = container_of(gpio, struct btgpio, gpio);
    + unsigned long flags;
    + u32 outen, data;
    +
    + spin_lock_irqsave(&bg->lock, flags);
    +
    + data = bgread(BT848_GPIO_DATA);
    + data &= ~(1 << nr);
    + bgwrite(data, BT848_GPIO_DATA);
    +
    + outen = bgread(BT848_GPIO_OUT_EN);
    + outen &= ~(1 << nr);
    + bgwrite(outen, BT848_GPIO_OUT_EN);
    +
    + spin_unlock_irqrestore(&bg->lock, flags);
    +
    + return 0;
    +}
    +
    +static int btgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
    +{
    + struct btgpio *bg = container_of(gpio, struct btgpio, gpio);
    + unsigned long flags;
    + u32 val;
    +
    + spin_lock_irqsave(&bg->lock, flags);
    + val = bgread(BT848_GPIO_DATA);
    + spin_unlock_irqrestore(&bg->lock, flags);
    +
    + return !!(val & (1 << nr));
    +}
    +
    +static int btgpio_gpio_direction_output(struct gpio_chip *gpio,
    + unsigned nr, int val)
    +{
    + struct btgpio *bg = container_of(gpio, struct btgpio, gpio);
    + unsigned long flags;
    + u32 outen, data;
    +
    + spin_lock_irqsave(&bg->lock, flags);
    +
    + outen = bgread(BT848_GPIO_OUT_EN);
    + outen |= (1 << nr);
    + bgwrite(outen, BT848_GPIO_OUT_EN);
    +
    + data = bgread(BT848_GPIO_DATA);
    + if (val)
    + data |= (1 << nr);
    + else
    + data &= ~(1 << nr);
    + bgwrite(data, BT848_GPIO_DATA);
    +
    + spin_unlock_irqrestore(&bg->lock, flags);
    +
    + return 0;
    +}
    +
    +static void btgpio_gpio_set(struct gpio_chip *gpio,
    + unsigned nr, int val)
    +{
    + struct btgpio *bg = container_of(gpio, struct btgpio, gpio);
    + unsigned long flags;
    + u32 data;
    +
    + spin_lock_irqsave(&bg->lock, flags);
    +
    + data = bgread(BT848_GPIO_DATA);
    + if (val)
    + data |= (1 << nr);
    + else
    + data &= ~(1 << nr);
    + bgwrite(data, BT848_GPIO_DATA);
    +
    + spin_unlock_irqrestore(&bg->lock, flags);
    +}
    +
    +static void btgpio_gpio_setup(struct btgpio *bg)
    +{
    + struct gpio_chip *c = &bg->gpio;
    +
    + c->label = bg->pdev->dev.bus_id;
    + c->owner = THIS_MODULE;
    + c->direction_input = btgpio_gpio_direction_input;
    + c->get = btgpio_gpio_get;
    + c->direction_output = btgpio_gpio_direction_output;
    + c->set = btgpio_gpio_set;
    + c->dbg_show = NULL;
    + c->base = modparam_gpiobase;
    + c->ngpio = BTGPIO_NR_GPIOS;
    + c->can_sleep = 0;
    +}
    +
    +static int btgpio_probe(struct pci_dev *dev,
    + const struct pci_device_id *pci_id)
    +{
    + struct btgpio *bg;
    + int err;
    +
    + bg = kzalloc(sizeof(*bg), GFP_KERNEL);
    + if (!bg)
    + return -ENOMEM;
    +
    + bg->pdev = dev;
    + spin_lock_init(&bg->lock);
    +
    + err = pci_enable_device(dev);
    + if (err) {
    + printk(KERN_ERR "btgpio: Can't enable device.\n");
    + goto err_freebg;
    + }
    + if (!request_mem_region(pci_resource_start(dev, 0),
    + pci_resource_len(dev, 0),
    + "btgpio")) {
    + printk(KERN_WARNING "btgpio: Can't request iomem (0x%llx).\n",
    + (unsigned long long)pci_resource_start(dev, 0));
    + err = -EBUSY;
    + goto err_disable;
    + }
    + pci_set_master(dev);
    + pci_set_drvdata(dev, bg);
    +
    + bg->mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
    + if (!bg->mmio) {
    + printk(KERN_ERR "btgpio: ioremap() failed\n");
    + err = -EIO;
    + goto err_release_mem;
    + }
    +
    + /* Disable interrupts */
    + bgwrite(0, BT848_INT_MASK);
    +
    + /* gpio init */
    + bgwrite(0, BT848_GPIO_DMA_CTL);
    + bgwrite(0, BT848_GPIO_REG_INP);
    + bgwrite(0, BT848_GPIO_OUT_EN);
    +
    + btgpio_gpio_setup(bg);
    + err = gpiochip_add(&bg->gpio);
    + if (err) {
    + printk(KERN_ERR "btgpio: Failed to register GPIOs\n");
    + goto err_release_mem;
    + }
    +
    + printk(KERN_INFO "btgpio: Abusing BT8xx card for GPIOs %d to %d\n",
    + bg->gpio.base, bg->gpio.base + BTGPIO_NR_GPIOS - 1);
    +
    + return 0;
    +
    +err_release_mem:
    + release_mem_region(pci_resource_start(dev, 0),
    + pci_resource_len(dev, 0));
    + pci_set_drvdata(dev, NULL);
    +err_disable:
    + pci_disable_device(dev);
    +err_freebg:
    + kfree(bg);
    +
    + return err;
    +}
    +
    +static void btgpio_remove(struct pci_dev *pdev)
    +{
    + struct btgpio *bg = pci_get_drvdata(pdev);
    +
    + gpiochip_remove(&bg->gpio);
    +
    + bgwrite(0, BT848_INT_MASK);
    + bgwrite(~0x0, BT848_INT_STAT);
    + bgwrite(0x0, BT848_GPIO_OUT_EN);
    +
    + iounmap(bg->mmio);
    + release_mem_region(pci_resource_start(pdev,0),
    + pci_resource_len(pdev,0));
    + pci_disable_device(pdev);
    +
    + pci_set_drvdata(pdev, NULL);
    + kfree(bg);
    +}
    +
    +#ifdef CONFIG_PM
    +static int btgpio_suspend(struct pci_dev *pdev, pm_message_t state)
    +{
    + struct btgpio *bg = pci_get_drvdata(pdev);
    + unsigned long flags;
    +
    + spin_lock_irqsave(&bg->lock, flags);
    +
    + bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
    + bg->saved_data = bgread(BT848_GPIO_DATA);
    +
    + bgwrite(0, BT848_INT_MASK);
    + bgwrite(~0x0, BT848_INT_STAT);
    + bgwrite(0x0, BT848_GPIO_OUT_EN);
    +
    + spin_unlock_irqrestore(&bg->lock, flags);
    +
    + pci_save_state(pdev);
    + pci_disable_device(pdev);
    + pci_set_power_state(pdev, pci_choose_state(pdev, state));
    +
    + return 0;
    +}
    +
    +static int btgpio_resume(struct pci_dev *pdev)
    +{
    + struct btgpio *bg = pci_get_drvdata(pdev);
    + unsigned long flags;
    + int err;
    +
    + pci_set_power_state(pdev, 0);
    + err = pci_enable_device(pdev);
    + if (err)
    + return err;
    + pci_restore_state(pdev);
    +
    + spin_lock_irqsave(&bg->lock, flags);
    +
    + bgwrite(0, BT848_INT_MASK);
    + bgwrite(0, BT848_GPIO_DMA_CTL);
    + bgwrite(0, BT848_GPIO_REG_INP);
    + bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
    + bgwrite(bg->saved_data & bg->saved_outen,
    + BT848_GPIO_DATA);
    +
    + spin_unlock_irqrestore(&bg->lock, flags);
    +
    + return 0;
    +}
    +#endif /* CONFIG_PM */
    +
    +static struct pci_device_id btgpio_pci_tbl[] = {
    + { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
    + { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
    + { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
    + { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
    + { 0, },
    +};
    +MODULE_DEVICE_TABLE(pci, btgpio_pci_tbl);
    +
    +static struct pci_driver btgpio_pci_driver = {
    + .name = "btgpio",
    + .id_table = btgpio_pci_tbl,
    + .probe = btgpio_probe,
    + .remove = btgpio_remove,
    +#ifdef CONFIG_PM
    + .suspend = btgpio_suspend,
    + .resume = btgpio_resume,
    +#endif
    +};
    +
    +static int btgpio_init(void)
    +{
    + return pci_register_driver(&btgpio_pci_driver);
    +}
    +module_init(btgpio_init)
    +
    +static void btgpio_exit(void)
    +{
    + pci_unregister_driver(&btgpio_pci_driver);
    +}
    +module_exit(btgpio_exit)
    +
    +MODULE_LICENSE("GPL");
    +MODULE_AUTHOR("Michael Buesch");
    +MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");
    Index: linux-2.6/MAINTAINERS
    ================================================== =================
    --- linux-2.6.orig/MAINTAINERS 2008-06-22 18:29:48.000000000 +0200
    +++ linux-2.6/MAINTAINERS 2008-07-01 01:56:02.000000000 +0200
    @@ -1012,6 +1012,12 @@ M: fujita.tomonori@lab.ntt.co.jp
    L: linux-scsi@vger.kernel.org
    S: Supported

    +BT8XX GPIO DRIVER (BTGPIO)
    +P: Michael Buesch
    +M: mb@bu3sch.de
    +W: http://bu3sch.de/btgpio.php
    +S: Maintained
    +
    BTTV VIDEO4LINUX DRIVER
    P: Mauro Carvalho Chehab
    M: mchehab@infradead.org

    --
    Greetings Michael.
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  2. Re: [PATCH] Add btgpio driver

    On Tue, Jul 01, 2008 at 02:06:38AM +0200, Michael Buesch wrote:
    > This adds the btgpio driver.
    > The purpose of the btgpio driver is to export all of the 24 GPIO pins
    > available on Brooktree 8xx chips to the kernel GPIO infrastructure.
    >
    > This makes it possible to use a physically modified BT8xx card as
    > cheap digital GPIO card.
    >
    > Signed-off-by: Michael Buesch


    How one is supposed to test this driver? I am unable to switch on
    the GIPO lib support in my config. I tried also allyesconfig but no
    trace of gpio lib stuff.

    thanks,
    Domenico

    -----[ Domenico Andreoli, aka cavok
    --[ http://www.dandreoli.com/gpgkey.asc
    ---[ 3A0F 2F80 F79C 678A 8936 4FEE 0677 9033 A20E BC50
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  3. Re: [PATCH] Add btgpio driver

    Hi Michael,

    > This adds the btgpio driver.
    > The purpose of the btgpio driver is to export all of the 24 GPIO pins
    > available on Brooktree 8xx chips to the kernel GPIO infrastructure.
    >
    > This makes it possible to use a physically modified BT8xx card as
    > cheap digital GPIO card.


    do you mind calling the driver bt8xxgpio. I am a little bit worried that
    we otherwise clash with a potential Bluetooth GPIO driver at some point.
    The new generation of generic Bluetooth drivers are using bt* as names
    (like btsdio, btusb etc.).

    Regards

    Marcel


    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  4. Re: [PATCH] Add btgpio driver

    On Wed, 2 Jul 2008, Domenico Andreoli wrote:

    > On Tue, Jul 01, 2008 at 03:04:15AM +0200, Domenico Andreoli wrote:
    > > On Tue, Jul 01, 2008 at 02:06:38AM +0200, Michael Buesch wrote:
    > > > This adds the btgpio driver.
    > > > The purpose of the btgpio driver is to export all of the 24 GPIO pins
    > > > available on Brooktree 8xx chips to the kernel GPIO infrastructure.
    > > >
    > > > This makes it possible to use a physically modified BT8xx card as
    > > > cheap digital GPIO card.
    > > >
    > > > Signed-off-by: Michael Buesch

    > >
    > > How one is supposed to test this driver? I am unable to switch on
    > > the GIPO lib support in my config. I tried also allyesconfig but no
    > > trace of gpio lib stuff.

    >
    > Really, GPIO menu is no present anywhere. While searching for GPIO
    > finds stuff, I am unable to locate and select it. I am using 2.6.26-rc8.


    For what $ARCH? GPIO menu says this:

    config HAVE_GPIO_LIB
    bool
    help
    Platforms select gpiolib if they use this infrastructure
    for all their GPIOs, usually starting with ones integrated
    into SOC processors.

    and then the arch-es that select HAVE_GPIO_LIB are these:

    ../arch/powerpc/platforms/52xx/Kconfig:50: select HAVE_GPIO_LIB
    ../arch/mips/Kconfig:803: select HAVE_GPIO_LIB
    ../arch/avr32/Kconfig:90: select HAVE_GPIO_LIB
    ../arch/avr32/Kconfig.orig:85: select HAVE_GPIO_LIB
    ../arch/arm/Kconfig:257: select HAVE_GPIO_LIB
    ../arch/arm/Kconfig:396: select HAVE_GPIO_LIB
    ../arch/arm/Kconfig:426: select HAVE_GPIO_LIB
    ../arch/arm/Kconfig:466: select HAVE_GPIO_LIB
    ../arch/arm/Kconfig.orig:401: select HAVE_GPIO_LIB

    so are you using one of those arches?

    --
    ~Randy
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  5. Re: [PATCH] Add btgpio driver

    On Tue, Jul 01, 2008 at 03:04:15AM +0200, Domenico Andreoli wrote:
    > On Tue, Jul 01, 2008 at 02:06:38AM +0200, Michael Buesch wrote:
    > > This adds the btgpio driver.
    > > The purpose of the btgpio driver is to export all of the 24 GPIO pins
    > > available on Brooktree 8xx chips to the kernel GPIO infrastructure.
    > >
    > > This makes it possible to use a physically modified BT8xx card as
    > > cheap digital GPIO card.
    > >
    > > Signed-off-by: Michael Buesch

    >
    > How one is supposed to test this driver? I am unable to switch on
    > the GIPO lib support in my config. I tried also allyesconfig but no
    > trace of gpio lib stuff.


    Really, GPIO menu is no present anywhere. While searching for GPIO
    finds stuff, I am unable to locate and select it. I am using 2.6.26-rc8.

    regards,
    Domenico

    -----[ Domenico Andreoli, aka cavok
    --[ http://www.dandreoli.com/gpgkey.asc
    ---[ 3A0F 2F80 F79C 678A 8936 4FEE 0677 9033 A20E BC50
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  6. Re: [PATCH] Add btgpio driver

    On Tuesday 01 July 2008, Domenico Andreoli wrote:
    >
    > > How one is supposed to test this driver? I am unable to switch on
    > > the GPIO lib support in my config. I tried also allyesconfig but no
    > > trace of gpio lib stuff.

    >
    > Really, GPIO menu is no present anywhere. While searching for GPIO
    > finds stuff, I am unable to locate and select it. I am using 2.6.26-rc8


    Appended is what I use on x86 PCs. It's not quite suitable for merge
    as-is since there's some x86 system with a nonstandard setup.

    - Dave

    ====== CUT HERE
    DEBUG ONLY -- make X86_PC use gpiolib.

    It's not clear to me how the various x86-ish platforms should
    be made to work here, since there seems to be no convention
    that each platform type has its own subdir.

    ---
    arch/x86/Kconfig | 2 ++
    include/asm-x86/gpio.h | 20 +++++++++++++++++++-
    2 files changed, 21 insertions(+), 1 deletion(-)

    --- a/arch/x86/Kconfig 2008-06-30 16:44:30.000000000 -0700
    +++ b/arch/x86/Kconfig 2008-06-30 21:37:08.000000000 -0700
    @@ -236,6 +236,8 @@ choice

    config X86_PC
    bool "PC-compatible"
    + select GENERIC_GPIO
    + select HAVE_GPIO_LIB
    help
    Choose this option if your computer is a standard PC or compatible.

    --- a/include/asm-x86/gpio.h 2008-06-30 16:44:30.000000000 -0700
    +++ b/include/asm-x86/gpio.h 2008-06-30 21:37:08.000000000 -0700
    @@ -1,6 +1,24 @@
    #ifndef _ASM_I386_GPIO_H
    #define _ASM_I386_GPIO_H

    -#include
    +// #include
    +
    +#include
    +#include /* cansleep wrappers */
    +
    +#define gpio_get_value __gpio_get_value
    +#define gpio_set_value __gpio_set_value
    +#define gpio_cansleep __gpio_cansleep
    +
    +static inline int gpio_to_irq(unsigned gpio)
    +{
    + return -ENOSYS;
    +}
    +
    +static inline int irq_to_gpio(unsigned irq)
    +{
    + return -EINVAL;
    +}
    +

    #endif /* _ASM_I386_GPIO_H */
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  7. Re: [PATCH] Add btgpio driver

    On Tue, Jul 01, 2008 at 03:09:38PM -0700, Randy.Dunlap wrote:
    > On Wed, 2 Jul 2008, Domenico Andreoli wrote:
    >
    > > On Tue, Jul 01, 2008 at 03:04:15AM +0200, Domenico Andreoli wrote:
    > > > On Tue, Jul 01, 2008 at 02:06:38AM +0200, Michael Buesch wrote:
    > > > > This adds the btgpio driver.
    > > > > The purpose of the btgpio driver is to export all of the 24 GPIO pins
    > > > > available on Brooktree 8xx chips to the kernel GPIO infrastructure.
    > > > >
    > > > > This makes it possible to use a physically modified BT8xx card as
    > > > > cheap digital GPIO card.
    > > > >
    > > > > Signed-off-by: Michael Buesch
    > > >
    > > > How one is supposed to test this driver? I am unable to switch on
    > > > the GIPO lib support in my config. I tried also allyesconfig but no
    > > > trace of gpio lib stuff.

    > >
    > > Really, GPIO menu is no present anywhere. While searching for GPIO
    > > finds stuff, I am unable to locate and select it. I am using 2.6.26-rc8.

    >
    > For what $ARCH? GPIO menu says this:
    >
    > config HAVE_GPIO_LIB
    > bool
    > help
    > Platforms select gpiolib if they use this infrastructure
    > for all their GPIOs, usually starting with ones integrated
    > into SOC processors.
    >
    > and then the arch-es that select HAVE_GPIO_LIB are these:
    >
    > ./arch/powerpc/platforms/52xx/Kconfig:50: select HAVE_GPIO_LIB
    > ./arch/mips/Kconfig:803: select HAVE_GPIO_LIB
    > ./arch/avr32/Kconfig:90: select HAVE_GPIO_LIB
    > ./arch/avr32/Kconfig.orig:85: select HAVE_GPIO_LIB
    > ./arch/arm/Kconfig:257: select HAVE_GPIO_LIB
    > ./arch/arm/Kconfig:396: select HAVE_GPIO_LIB
    > ./arch/arm/Kconfig:426: select HAVE_GPIO_LIB
    > ./arch/arm/Kconfig:466: select HAVE_GPIO_LIB
    > ./arch/arm/Kconfig.orig:401: select HAVE_GPIO_LIB
    >
    > so are you using one of those arches?


    ah.. this explains, i am using x86_64. my Kconfig-foo is still too young.

    thanks,
    Domenico

    -----[ Domenico Andreoli, aka cavok
    --[ http://www.dandreoli.com/gpgkey.asc
    ---[ 3A0F 2F80 F79C 678A 8936 4FEE 0677 9033 A20E BC50
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

+ Reply to Thread