the final part:

- remove broken Etrax IDE driver (Adrian Bunk)

- add ->input_data and ->output_data methods

- add ->tf_load and ->tf_read methods

- and more (detailed changelog below)


Linus, please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/

to receive the following updates:

arch/arm/Kconfig | 15 +-
drivers/ide/Kconfig | 34 --
drivers/ide/Makefile | 2 +-
drivers/ide/arm/icside.c | 2 +-
drivers/ide/arm/palm_bk3710.c | 1 +
drivers/ide/arm/rapide.c | 1 +
drivers/ide/cris/Makefile | 3 -
drivers/ide/cris/ide-cris.c | 1086 -------------------------------------
drivers/ide/h8300/ide-h8300.c | 108 ++++-
drivers/ide/ide-cd.c | 32 +-
drivers/ide/ide-dma.c | 11 +-
drivers/ide/ide-floppy.c | 27 +-
drivers/ide/ide-io.c | 68 +--
drivers/ide/ide-iops.c | 344 +++++++-----
drivers/ide/ide-lib.c | 2 +-
drivers/ide/ide-probe.c | 8 +-
drivers/ide/ide-tape.c | 19 +-
drivers/ide/ide-taskfile.c | 70 +--
drivers/ide/legacy/falconide.c | 26 +
drivers/ide/legacy/ide_platform.c | 4 +-
drivers/ide/legacy/q40ide.c | 24 +
drivers/ide/mips/au1xxx-ide.c | 17 +-
drivers/ide/mips/swarm.c | 1 +
drivers/ide/pci/ns87415.c | 44 ++
drivers/ide/pci/pdc202xx_new.c | 8 +-
drivers/ide/pci/piix.c | 1 +
drivers/ide/pci/scc_pata.c | 196 ++++++-
drivers/ide/pci/sgiioc4.c | 1 +
drivers/ide/pci/siimage.c | 539 +++++++++----------
drivers/ide/ppc/pmac.c | 1 +
drivers/pcmcia/Kconfig | 1 -
drivers/scsi/ide-scsi.c | 38 +-
include/linux/ide.h | 53 +--
33 files changed, 961 insertions(+), 1826 deletions(-)
delete mode 100644 drivers/ide/cris/Makefile
delete mode 100644 drivers/ide/cris/ide-cris.c


Adrian Bunk (2):
remove the broken ETRAX_IDE driver
ARM: always select HAVE_IDE

Alexander Smal (1):
ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]

Bartlomiej Zolnierkiewicz (29):
ide: fix au1xxx-ide breakage
falconide/q40ide: add ->atapi_*put_bytes and ->ata_*put_data methods (take 2)
ide: merge ->atapi_*put_bytes and ->ata_*put_data methods
scc_pata: add ->{in,out}put_data methods (take 2)
au1xxx-ide: add ->{in,out}put_data methods (take 2)
ide-h8300: add ->{in,out}put_data methods (take 2)
ide: add IDE_HFLAG_MMIO host flag (take 2)
ide: remove ->INS{W,L} and ->OUTS{W,L} methods
siimage: do clocking register posting earlier in setup_mmio_siimage()
siimage: add sil_* I/O ops
siimage: remove proc_reports_siimage()
ide: always use ->OUTBSYNC method for executing commands
ide-{floppy,tape,scsi}: 400ns delay is required after executing the command
ide: add ide_execute_pkt_cmd() helper
ide: factor out debugging code from ide_tf_load()
ide: move ide_tf_{load,read} to ide-iops.c
ide: add ->tf_load and ->tf_read methods
ide-cris: add ->tf_{load,read} methods
ide-h8300: add ->tf_{load,read} methods
scc_pata: add ->tf_{load,read} methods
ns87415: add ->tf_read method
ide: use IDE I/O helpers directly in ide_tf_{load,read}()
ide: remove ->INW and ->OUTW methods
ide: add ide_pad_transfer() helper
ide: skip "VLB sync" if host uses MMIO
scc_pata: add ->dma_host_set and ->dma_start methods
ide: remove ->dma_vendor{1,3} fields from ide_hwif_t
ide: remove ->dma_prdtable field from ide_hwif_t
piix: add Asus Eee 701 controller to short cable list

Roel Kluin (2):
ide-cd: fix test unsigned var < 0
ide-cd: clean up cdrom_analyze_sense_data()

Sergei Shtylyov (1):
siimage: coding style cleanup (take 2)


diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d8d2532..b786e68 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration"
config ARM
bool
default y
+ select HAVE_IDE
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
@@ -223,7 +224,6 @@ config ARCH_CLPS7500
select TIMER_ACORN
select ISA
select NO_IOPORT
- select HAVE_IDE
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.

@@ -236,7 +236,6 @@ config ARCH_CO285
bool "Co-EBSA285"
select FOOTBRIDGE
select FOOTBRIDGE_ADDIN
- select HAVE_IDE
help
Support for Intel's EBSA285 companion chip.

@@ -262,7 +261,6 @@ config ARCH_EP93XX
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
- select HAVE_IDE
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -301,7 +299,6 @@ config ARCH_IOP32X
depends on MMU
select PLAT_IOP
select PCI
- select HAVE_IDE
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
@@ -311,14 +308,12 @@ config ARCH_IOP33X
depends on MMU
select PLAT_IOP
select PCI
- select HAVE_IDE
help
Support for Intel's IOP33X (XScale) family of processors.

config ARCH_IXP23XX
bool "IXP23XX-based"
depends on MMU
- select HAVE_IDE
select PCI
help
Support for Intel's IXP23xx (XScale) family of processors.
@@ -336,14 +331,12 @@ config ARCH_IXP4XX
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select HAVE_IDE
help
Support for Intel's IXP4XX (XScale) family of processors.

config ARCH_L7200
bool "LinkUp-L7200"
select FIQ
- select HAVE_IDE
help
Say Y here if you intend to run this kernel on a LinkUp Systems
L7200 Software Development Board which uses an ARM720T processor.
@@ -400,7 +393,6 @@ config ARCH_PXA
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
- select HAVE_IDE
select HAVE_GPIO_LIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
@@ -416,7 +408,6 @@ config ARCH_RPC
select ARCH_MAY_HAVE_PC_FDC
select ISA_DMA_API
select NO_IOPORT
- select HAVE_IDE
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -432,7 +423,6 @@ config ARCH_SA1100
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
- select HAVE_IDE
select HAVE_GPIO_LIB
help
Support for StrongARM 11x0 based boards.
@@ -440,7 +430,6 @@ config ARCH_SA1100
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
- select HAVE_IDE
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (), the IPAQ 1940 or
@@ -448,7 +437,6 @@ config ARCH_S3C2410

config ARCH_SHARK
bool "Shark"
- select HAVE_IDE
select ISA
select ISA_DMA
select PCI
@@ -458,7 +446,6 @@ config ARCH_SHARK

config ARCH_LH7A40X
bool "Sharp LH7A40X"
- select HAVE_IDE
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3f9e100..f702f91 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -862,40 +862,6 @@ config BLK_DEV_IDE_BAST
Say Y here if you want to support the onboard IDE channels on the
Simtec BAST or the Thorcom VR1000

-config ETRAX_IDE
- tristate "ETRAX IDE support"
- depends on CRIS && BROKEN
- select BLK_DEV_IDEDMA
- help
- Enables the ETRAX IDE driver.
-
- You can't use parallel ports or SCSI ports at the same time.
-
-config ETRAX_IDE_DELAY
- int "Delay for drives to regain consciousness"
- depends on ETRAX_IDE && ETRAX_ARCH_V10
- default 15
- help
- Number of seconds to wait for IDE drives to spin up after an IDE
- reset.
-
-choice
- prompt "IDE reset pin"
- depends on ETRAX_IDE && ETRAX_ARCH_V10
- default ETRAX_IDE_PB7_RESET
-
-config ETRAX_IDE_PB7_RESET
- bool "Port_PB_Bit_7"
- help
- IDE reset on pin 7 on port B
-
-config ETRAX_IDE_G27_RESET
- bool "Port_G_Bit_27"
- help
- IDE reset on pin 27 on port G
-
-endchoice
-
config IDE_H8300
tristate "H8300 IDE support"
depends on H8300
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 571544c..f94b679 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -35,7 +35,7 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y)
obj-y += cmd640-core.o
endif

-obj-$(CONFIG_BLK_DEV_IDE) += cris/ ppc/
+obj-$(CONFIG_BLK_DEV_IDE) += ppc/
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 65038ca..0614569 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -483,7 +483,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = {
.init_dma = icside_dma_off_init,
.port_ops = &icside_v6_no_dma_port_ops,
.dma_ops = &icside_v6_dma_ops,
- .host_flags = IDE_HFLAG_SERIALIZE,
+ .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
.mwdma_mask = ATA_MWDMA2,
.swdma_mask = ATA_SWDMA2,
};
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index aaf3254..96378eb 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -342,6 +342,7 @@ static const struct ide_port_ops palm_bk3710_ports_ops = {
static const struct ide_port_info __devinitdata palm_bk3710_port_info = {
.init_dma = palm_bk3710_init_dma,
.port_ops = &palm_bk3710_ports_ops,
+ .host_flags = IDE_HFLAG_MMIO,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA4, /* (input clk 99MHz) */
.mwdma_mask = ATA_MWDMA2,
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index babc1a5..1747b23 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -53,6 +53,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)

ide_init_port_hw(hwif, &hw);

+ hwif->host_flags = IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);

idx[0] = hwif->index;
diff --git a/drivers/ide/cris/Makefile b/drivers/ide/cris/Makefile
deleted file mode 100644
index 20b9596..0000000
--- a/drivers/ide/cris/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-EXTRA_CFLAGS += -Idrivers/ide
-
-obj-$(CONFIG_IDE_ETRAX) += ide-cris.o
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
deleted file mode 100644
index 9df2685..0000000
--- a/drivers/ide/cris/ide-cris.c
+++ /dev/null
@@ -1,1086 +0,0 @@
-/*
- * Etrax specific IDE functions, like init and PIO-mode setting etc.
- * Almost the entire ide.c is used for the rest of the Etrax ATA driver.
- * Copyright (c) 2000-2005 Axis Communications AB
- *
- * Authors: Bjorn Wesen (initial version)
- * Mikael Starvik (crisv32 port)
- */
-
-/* Regarding DMA:
- *
- * There are two forms of DMA - "DMA handshaking" between the interface and the drive,
- * and DMA between the memory and the interface. We can ALWAYS use the latter, since it's
- * something built-in in the Etrax. However only some drives support the DMA-mode handshaking
- * on the ATA-bus. The normal PC driver and Triton interface disables memory-if DMA when the
- * device can't do DMA handshaking for some stupid reason. We don't need to do that.
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-
-/* number of DMA descriptors */
-#define MAX_DMA_DESCRS 64
-
-/* number of times to retry busy-flags when reading/writing IDE-registers
- * this can't be too high because a hung harddisk might cause the watchdog
- * to trigger (sometimes INB and OUTB are called with irq's disabled)
- */
-
-#define IDE_REGISTER_TIMEOUT 300
-
-#define LOWDB(x)
-#define D(x)
-
-enum /* Transfer types */
-{
- TYPE_PIO,
- TYPE_DMA,
- TYPE_UDMA
-};
-
-/* CRISv32 specifics */
-#ifdef CONFIG_ETRAX_ARCH_V32
-#include
-#include
-#include
-#include
-
-#define ATA_UDMA2_CYC 2
-#define ATA_UDMA2_DVS 3
-#define ATA_UDMA1_CYC 2
-#define ATA_UDMA1_DVS 4
-#define ATA_UDMA0_CYC 4
-#define ATA_UDMA0_DVS 6
-#define ATA_DMA2_STROBE 7
-#define ATA_DMA2_HOLD 1
-#define ATA_DMA1_STROBE 8
-#define ATA_DMA1_HOLD 3
-#define ATA_DMA0_STROBE 25
-#define ATA_DMA0_HOLD 19
-#define ATA_PIO4_SETUP 3
-#define ATA_PIO4_STROBE 7
-#define ATA_PIO4_HOLD 1
-#define ATA_PIO3_SETUP 3
-#define ATA_PIO3_STROBE 9
-#define ATA_PIO3_HOLD 3
-#define ATA_PIO2_SETUP 3
-#define ATA_PIO2_STROBE 13
-#define ATA_PIO2_HOLD 5
-#define ATA_PIO1_SETUP 5
-#define ATA_PIO1_STROBE 23
-#define ATA_PIO1_HOLD 9
-#define ATA_PIO0_SETUP 9
-#define ATA_PIO0_STROBE 39
-#define ATA_PIO0_HOLD 9
-
-int
-cris_ide_ack_intr(ide_hwif_t* hwif)
-{
- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int,
- hwif->io_ports.data_addr);
- REG_WR_INT(ata, regi_ata, rw_ack_intr, 1 << ctrl2.sel);
- return 1;
-}
-
-static inline int
-cris_ide_busy(void)
-{
- reg_ata_rs_stat_data stat_data;
- stat_data = REG_RD(ata, regi_ata, rs_stat_data);
- return stat_data.busy;
-}
-
-static inline int
-cris_ide_ready(void)
-{
- return !cris_ide_busy();
-}
-
-static inline int
-cris_ide_data_available(unsigned short* data)
-{
- reg_ata_rs_stat_data stat_data;
- stat_data = REG_RD(ata, regi_ata, rs_stat_data);
- *data = stat_data.data;
- return stat_data.dav;
-}
-
-static void
-cris_ide_write_command(unsigned long command)
-{
- REG_WR_INT(ata, regi_ata, rw_ctrl2, command); /* write data to the drive's register */
-}
-
-static void
-cris_ide_set_speed(int type, int setup, int strobe, int hold)
-{
- reg_ata_rw_ctrl0 ctrl0 = REG_RD(ata, regi_ata, rw_ctrl0);
- reg_ata_rw_ctrl1 ctrl1 = REG_RD(ata, regi_ata, rw_ctrl1);
-
- if (type == TYPE_PIO) {
- ctrl0.pio_setup = setup;
- ctrl0.pio_strb = strobe;
- ctrl0.pio_hold = hold;
- } else if (type == TYPE_DMA) {
- ctrl0.dma_strb = strobe;
- ctrl0.dma_hold = hold;
- } else if (type == TYPE_UDMA) {
- ctrl1.udma_tcyc = setup;
- ctrl1.udma_tdvs = strobe;
- }
- REG_WR(ata, regi_ata, rw_ctrl0, ctrl0);
- REG_WR(ata, regi_ata, rw_ctrl1, ctrl1);
-}
-
-static unsigned long
-cris_ide_base_address(int bus)
-{
- reg_ata_rw_ctrl2 ctrl2 = {0};
- ctrl2.sel = bus;
- return REG_TYPE_CONV(int, reg_ata_rw_ctrl2, ctrl2);
-}
-
-static unsigned long
-cris_ide_reg_addr(unsigned long addr, int cs0, int cs1)
-{
- reg_ata_rw_ctrl2 ctrl2 = {0};
- ctrl2.addr = addr;
- ctrl2.cs1 = cs1;
- ctrl2.cs0 = cs0;
- return REG_TYPE_CONV(int, reg_ata_rw_ctrl2, ctrl2);
-}
-
-static __init void
-cris_ide_reset(unsigned val)
-{
- reg_ata_rw_ctrl0 ctrl0 = {0};
- ctrl0.rst = val ? regk_ata_active : regk_ata_inactive;
- REG_WR(ata, regi_ata, rw_ctrl0, ctrl0);
-}
-
-static __init void
-cris_ide_init(void)
-{
- reg_ata_rw_ctrl0 ctrl0 = {0};
- reg_ata_rw_intr_mask intr_mask = {0};
-
- ctrl0.en = regk_ata_yes;
- REG_WR(ata, regi_ata, rw_ctrl0, ctrl0);
-
- intr_mask.bus0 = regk_ata_yes;
- intr_mask.bus1 = regk_ata_yes;
- intr_mask.bus2 = regk_ata_yes;
- intr_mask.bus3 = regk_ata_yes;
-
- REG_WR(ata, regi_ata, rw_intr_mask, intr_mask);
-
- crisv32_request_dma(2, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata);
- crisv32_request_dma(3, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata);
-
- crisv32_pinmux_alloc_fixed(pinmux_ata);
- crisv32_pinmux_alloc_fixed(pinmux_ata0);
- crisv32_pinmux_alloc_fixed(pinmux_ata1);
- crisv32_pinmux_alloc_fixed(pinmux_ata2);
- crisv32_pinmux_alloc_fixed(pinmux_ata3);
-
- DMA_RESET(regi_dma2);
- DMA_ENABLE(regi_dma2);
- DMA_RESET(regi_dma3);
- DMA_ENABLE(regi_dma3);
-
- DMA_WR_CMD (regi_dma2, regk_dma_set_w_size2);
- DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2);
-}
-
-static dma_descr_context mycontext __attribute__ ((__aligned__(32)));
-
-#define cris_dma_descr_type dma_descr_data
-#define cris_pio_read regk_ata_rd
-#define cris_ultra_mask 0x7
-#define MAX_DESCR_SIZE 0xffffffffUL
-
-static unsigned long
-cris_ide_get_reg(unsigned long reg)
-{
- return (reg & 0x0e000000) >> 25;
-}
-
-static void
-cris_ide_fill_descriptor(cris_dma_descr_type *d, void* buf, unsigned int len, int last)
-{
- d->buf = (char*)virt_to_phys(buf);
- d->after = d->buf + len;
- d->eol = last;
-}
-
-static void
-cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir,int type,int len)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int,
- hwif->io_ports.data_addr);
- reg_ata_rw_trf_cnt trf_cnt = {0};
-
- mycontext.saved_data = (dma_descr_data*)virt_to_phys(d);
- mycontext.saved_data_buf = d->buf;
- /* start the dma channel */
- DMA_START_CONTEXT(dir ? regi_dma3 : regi_dma2, virt_to_phys(&mycontext));
-
- /* initiate a multi word dma read using PIO handshaking */
- trf_cnt.cnt = len >> 1;
- /* Due to a "feature" the transfer count has to be one extra word for UDMA. */
- if (type == TYPE_UDMA)
- trf_cnt.cnt++;
- REG_WR(ata, regi_ata, rw_trf_cnt, trf_cnt);
-
- ctrl2.rw = dir ? regk_ata_rd : regk_ata_wr;
- ctrl2.trf_mode = regk_ata_dma;
- ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio :
- type == TYPE_DMA ? regk_ata_dma : regk_ata_udma;
- ctrl2.multi = regk_ata_yes;
- ctrl2.dma_size = regk_ata_word;
- REG_WR(ata, regi_ata, rw_ctrl2, ctrl2);
-}
-
-static void
-cris_ide_wait_dma(int dir)
-{
- reg_dma_rw_stat status;
- do
- {
- status = REG_RD(dma, dir ? regi_dma3 : regi_dma2, rw_stat);
- } while(status.list_state != regk_dma_data_at_eol);
-}
-
-static int cris_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- int intr = REG_RD_INT(ata, regi_ata, r_intr);
-
- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int,
- hwif->io_ports.data_addr);
-
- return intr & (1 << ctrl2.sel) ? 1 : 0;
-}
-
-static void cris_ide_initialize_dma(int dir)
-{
-}
-
-#else
-/* CRISv10 specifics */
-#include
-#include
-
-/* PIO timing (in R_ATA_CONFIG)
- *
- * _____________________________
- * ADDRESS : ________/
- *
- * _______________
- * DIOR : ____________/ \__________
- *
- * _______________
- * DATA : XXXXXXXXXXXXXXXX_______________XXXXXXXX
- *
- *
- * DIOR is unbuffered while address and data is buffered.
- * This creates two problems:
- * 1. The DIOR pulse is to early (because it is unbuffered)
- * 2. The rise time of DIOR is long
- *
- * There are at least three different plausible solutions
- * 1. Use a pad capable of larger currents in Etrax
- * 2. Use an external buffer
- * 3. Make the strobe pulse longer
- *
- * Some of the strobe timings below are modified to compensate
- * for this. This implies a slight performance decrease.
- *
- * THIS SHOULD NEVER BE CHANGED!
- *
- * TODO: Is this true for the latest LX boards still ?
- */
-
-#define ATA_UDMA2_CYC 0 /* No UDMA supported, just to make it compile. */
-#define ATA_UDMA2_DVS 0
-#define ATA_UDMA1_CYC 0
-#define ATA_UDMA1_DVS 0
-#define ATA_UDMA0_CYC 0
-#define ATA_UDMA0_DVS 0
-#define ATA_DMA2_STROBE 4
-#define ATA_DMA2_HOLD 0
-#define ATA_DMA1_STROBE 4
-#define ATA_DMA1_HOLD 1
-#define ATA_DMA0_STROBE 12
-#define ATA_DMA0_HOLD 9
-#define ATA_PIO4_SETUP 1
-#define ATA_PIO4_STROBE 5
-#define ATA_PIO4_HOLD 0
-#define ATA_PIO3_SETUP 1
-#define ATA_PIO3_STROBE 5
-#define ATA_PIO3_HOLD 1
-#define ATA_PIO2_SETUP 1
-#define ATA_PIO2_STROBE 6
-#define ATA_PIO2_HOLD 2
-#define ATA_PIO1_SETUP 2
-#define ATA_PIO1_STROBE 11
-#define ATA_PIO1_HOLD 4
-#define ATA_PIO0_SETUP 4
-#define ATA_PIO0_STROBE 19
-#define ATA_PIO0_HOLD 4
-
-int
-cris_ide_ack_intr(ide_hwif_t* hwif)
-{
- return 1;
-}
-
-static inline int
-cris_ide_busy(void)
-{
- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ;
-}
-
-static inline int
-cris_ide_ready(void)
-{
- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ;
-}
-
-static inline int
-cris_ide_data_available(unsigned short* data)
-{
- unsigned long status = *R_ATA_STATUS_DATA;
- *data = (unsigned short)status;
- return status & IO_MASK(R_ATA_STATUS_DATA, dav);
-}
-
-static void
-cris_ide_write_command(unsigned long command)
-{
- *R_ATA_CTRL_DATA = command;
-}
-
-static void
-cris_ide_set_speed(int type, int setup, int strobe, int hold)
-{
- static int pio_setup = ATA_PIO4_SETUP;
- static int pio_strobe = ATA_PIO4_STROBE;
- static int pio_hold = ATA_PIO4_HOLD;
- static int dma_strobe = ATA_DMA2_STROBE;
- static int dma_hold = ATA_DMA2_HOLD;
-
- if (type == TYPE_PIO) {
- pio_setup = setup;
- pio_strobe = strobe;
- pio_hold = hold;
- } else if (type == TYPE_DMA) {
- dma_strobe = strobe;
- dma_hold = hold;
- }
- *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ) |
- IO_FIELD( R_ATA_CONFIG, dma_strobe, dma_strobe ) |
- IO_FIELD( R_ATA_CONFIG, dma_hold, dma_hold ) |
- IO_FIELD( R_ATA_CONFIG, pio_setup, pio_setup ) |
- IO_FIELD( R_ATA_CONFIG, pio_strobe, pio_strobe ) |
- IO_FIELD( R_ATA_CONFIG, pio_hold, pio_hold ) );
-}
-
-static unsigned long
-cris_ide_base_address(int bus)
-{
- return IO_FIELD(R_ATA_CTRL_DATA, sel, bus);
-}
-
-static unsigned long
-cris_ide_reg_addr(unsigned long addr, int cs0, int cs1)
-{
- return IO_FIELD(R_ATA_CTRL_DATA, addr, addr) |
- IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0) |
- IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1);
-}
-
-static __init void
-cris_ide_reset(unsigned val)
-{
-#ifdef CONFIG_ETRAX_IDE_G27_RESET
- REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, 27, val);
-#endif
-#ifdef CONFIG_ETRAX_IDE_PB7_RESET
- port_pb_dir_shadow = port_pb_dir_shadow |
- IO_STATE(R_PORT_PB_DIR, dir7, output);
- *R_PORT_PB_DIR = port_pb_dir_shadow;
- REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 7, val);
-#endif
-}
-
-static __init void
-cris_ide_init(void)
-{
- volatile unsigned int dummy;
-
- *R_ATA_CTRL_DATA = 0;
- *R_ATA_TRANSFER_CNT = 0;
- *R_ATA_CONFIG = 0;
-
- if (cris_request_io_interface(if_ata, "ETRAX100LX IDE")) {
- printk(KERN_CRIT "ide: Failed to get IO interface\n");
- return;
- } else if (cris_request_dma(ATA_TX_DMA_NBR,
- "ETRAX100LX IDE TX",
- DMA_VERBOSE_ON_ERROR,
- dma_ata)) {
- cris_free_io_interface(if_ata);
- printk(KERN_CRIT "ide: Failed to get Tx DMA channel\n");
- return;
- } else if (cris_request_dma(ATA_RX_DMA_NBR,
- "ETRAX100LX IDE RX",
- DMA_VERBOSE_ON_ERROR,
- dma_ata)) {
- cris_free_dma(ATA_TX_DMA_NBR, "ETRAX100LX IDE Tx");
- cris_free_io_interface(if_ata);
- printk(KERN_CRIT "ide: Failed to get Rx DMA channel\n");
- return;
- }
-
- /* make a dummy read to set the ata controller in a proper state */
- dummy = *R_ATA_STATUS_DATA;
-
- *R_ATA_CONFIG = ( IO_FIELD( R_ATA_CONFIG, enable, 1 ));
- *R_ATA_CTRL_DATA = ( IO_STATE( R_ATA_CTRL_DATA, rw, read) |
- IO_FIELD( R_ATA_CTRL_DATA, addr, 1 ) );
-
- while(*R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy)); /* wait for busy flag*/
-
- *R_IRQ_MASK0_SET = ( IO_STATE( R_IRQ_MASK0_SET, ata_irq0, set ) |
- IO_STATE( R_IRQ_MASK0_SET, ata_irq1, set ) |
- IO_STATE( R_IRQ_MASK0_SET, ata_irq2, set ) |
- IO_STATE( R_IRQ_MASK0_SET, ata_irq3, set ) );
-
- /* reset the dma channels we will use */
-
- RESET_DMA(ATA_TX_DMA_NBR);
- RESET_DMA(ATA_RX_DMA_NBR);
- WAIT_DMA(ATA_TX_DMA_NBR);
- WAIT_DMA(ATA_RX_DMA_NBR);
-}
-
-#define cris_dma_descr_type etrax_dma_descr
-#define cris_pio_read IO_STATE(R_ATA_CTRL_DATA, rw, read)
-#define cris_ultra_mask 0x0
-#define MAX_DESCR_SIZE 0x10000UL
-
-static unsigned long
-cris_ide_get_reg(unsigned long reg)
-{
- return (reg & 0x0e000000) >> 25;
-}
-
-static void
-cris_ide_fill_descriptor(cris_dma_descr_type *d, void* buf, unsigned int len, int last)
-{
- d->buf = virt_to_phys(buf);
- d->sw_len = len == MAX_DESCR_SIZE ? 0 : len;
- if (last)
- d->ctrl |= d_eol;
-}
-
-static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir, int type, int len)
-{
- unsigned long cmd;
-
- if (dir) {
- /* need to do this before RX DMA due to a chip bug
- * it is enough to just flush the part of the cache that
- * corresponds to the buffers we start, but since HD transfers
- * usually are more than 8 kB, it is easier to optimize for the
- * normal case and just flush the entire cache. its the only
- * way to be sure! (OB movie quote)
- */
- flush_etrax_cache();
- *R_DMA_CH3_FIRST = virt_to_phys(d);
- *R_DMA_CH3_CMD = IO_STATE(R_DMA_CH3_CMD, cmd, start);
-
- } else {
- *R_DMA_CH2_FIRST = virt_to_phys(d);
- *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, start);
- }
-
- /* initiate a multi word dma read using DMA handshaking */
-
- *R_ATA_TRANSFER_CNT =
- IO_FIELD(R_ATA_TRANSFER_CNT, count, len >> 1);
-
- cmd = dir ? IO_STATE(R_ATA_CTRL_DATA, rw, read) : IO_STATE(R_ATA_CTRL_DATA, rw, write);
- cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) :
- IO_STATE(R_ATA_CTRL_DATA, handsh, dma);
- *R_ATA_CTRL_DATA =
- cmd |
- IO_FIELD(R_ATA_CTRL_DATA, data,
- drive->hwif->io_ports.data_addr) |
- IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) |
- IO_STATE(R_ATA_CTRL_DATA, multi, on) |
- IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
-}
-
-static void
-cris_ide_wait_dma(int dir)
-{
- if (dir)
- WAIT_DMA(ATA_RX_DMA_NBR);
- else
- WAIT_DMA(ATA_TX_DMA_NBR);
-}
-
-static int cris_dma_test_irq(ide_drive_t *drive)
-{
- int intr = *R_IRQ_MASK0_RD;
- int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel,
- drive->hwif->io_ports.data_addr);
-
- return intr & (1 << (bus + IO_BITNR(R_IRQ_MASK0_RD, ata_irq0))) ? 1 : 0;
-}
-
-
-static void cris_ide_initialize_dma(int dir)
-{
- if (dir)
- {
- RESET_DMA(ATA_RX_DMA_NBR); /* sometimes the DMA channel get stuck so we need to do this */
- WAIT_DMA(ATA_RX_DMA_NBR);
- }
- else
- {
- RESET_DMA(ATA_TX_DMA_NBR); /* sometimes the DMA channel get stuck so we need to do this */
- WAIT_DMA(ATA_TX_DMA_NBR);
- }
-}
-
-#endif
-
-void
-cris_ide_outw(unsigned short data, unsigned long reg) {
- int timeleft;
-
- LOWDB(printk("ow: data 0x%x, reg 0x%x\n", data, reg));
-
- /* note the lack of handling any timeouts. we stop waiting, but we don't
- * really notify anybody.
- */
-
- timeleft = IDE_REGISTER_TIMEOUT;
- /* wait for busy flag */
- do {
- timeleft--;
- } while(timeleft && cris_ide_busy());
-
- /*
- * Fall through at a timeout, so the ongoing command will be
- * aborted by the write below, which is expected to be a dummy
- * command to the command register. This happens when a faulty
- * drive times out on a command. See comment on timeout in
- * INB.
- */
- if(!timeleft)
- printk("ATA timeout reg 0x%lx := 0x%x\n", reg, data);
-
- cris_ide_write_command(reg|data); /* write data to the drive's register */
-
- timeleft = IDE_REGISTER_TIMEOUT;
- /* wait for transmitter ready */
- do {
- timeleft--;
- } while(timeleft && !cris_ide_ready());
-}
-
-void
-cris_ide_outb(unsigned char data, unsigned long reg)
-{
- cris_ide_outw(data, reg);
-}
-
-void
-cris_ide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port)
-{
- cris_ide_outw(addr, port);
-}
-
-unsigned short
-cris_ide_inw(unsigned long reg) {
- int timeleft;
- unsigned short val;
-
- timeleft = IDE_REGISTER_TIMEOUT;
- /* wait for busy flag */
- do {
- timeleft--;
- } while(timeleft && cris_ide_busy());
-
- if(!timeleft) {
- /*
- * If we're asked to read the status register, like for
- * example when a command does not complete for an
- * extended time, but the ATA interface is stuck in a
- * busy state at the *ETRAX* ATA interface level (as has
- * happened repeatedly with at least one bad disk), then
- * the best thing to do is to pretend that we read
- * "busy" in the status register, so the IDE driver will
- * time-out, abort the ongoing command and perform a
- * reset sequence. Note that the subsequent OUT_BYTE
- * call will also timeout on busy, but as long as the
- * write is still performed, everything will be fine.
- */
- if (cris_ide_get_reg(reg) == 7)
- return BUSY_STAT;
- else
- /* For other rare cases we assume 0 is good enough. */
- return 0;
- }
-
- cris_ide_write_command(reg | cris_pio_read);
-
- timeleft = IDE_REGISTER_TIMEOUT;
- /* wait for available */
- do {
- timeleft--;
- } while(timeleft && !cris_ide_data_available(&val));
-
- if(!timeleft)
- return 0;
-
- LOWDB(printk("inb: 0x%x from reg 0x%x\n", val & 0xff, reg));
-
- return val;
-}
-
-unsigned char
-cris_ide_inb(unsigned long reg)
-{
- return (unsigned char)cris_ide_inw(reg);
-}
-
-static void cris_ide_input_data (ide_drive_t *drive, void *, unsigned int);
-static void cris_ide_output_data (ide_drive_t *drive, void *, unsigned int);
-static void cris_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int);
-static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int);
-
-static void cris_dma_host_set(ide_drive_t *drive, int on)
-{
-}
-
-static void cris_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- int setup, strobe, hold;
-
- switch(pio)
- {
- case 0:
- setup = ATA_PIO0_SETUP;
- strobe = ATA_PIO0_STROBE;
- hold = ATA_PIO0_HOLD;
- break;
- case 1:
- setup = ATA_PIO1_SETUP;
- strobe = ATA_PIO1_STROBE;
- hold = ATA_PIO1_HOLD;
- break;
- case 2:
- setup = ATA_PIO2_SETUP;
- strobe = ATA_PIO2_STROBE;
- hold = ATA_PIO2_HOLD;
- break;
- case 3:
- setup = ATA_PIO3_SETUP;
- strobe = ATA_PIO3_STROBE;
- hold = ATA_PIO3_HOLD;
- break;
- case 4:
- setup = ATA_PIO4_SETUP;
- strobe = ATA_PIO4_STROBE;
- hold = ATA_PIO4_HOLD;
- break;
- default:
- return;
- }
-
- cris_ide_set_speed(TYPE_PIO, setup, strobe, hold);
-}
-
-static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- int cyc = 0, dvs = 0, strobe = 0, hold = 0;
-
- switch(speed)
- {
- case XFER_UDMA_0:
- cyc = ATA_UDMA0_CYC;
- dvs = ATA_UDMA0_DVS;
- break;
- case XFER_UDMA_1:
- cyc = ATA_UDMA1_CYC;
- dvs = ATA_UDMA1_DVS;
- break;
- case XFER_UDMA_2:
- cyc = ATA_UDMA2_CYC;
- dvs = ATA_UDMA2_DVS;
- break;
- case XFER_MW_DMA_0:
- strobe = ATA_DMA0_STROBE;
- hold = ATA_DMA0_HOLD;
- break;
- case XFER_MW_DMA_1:
- strobe = ATA_DMA1_STROBE;
- hold = ATA_DMA1_HOLD;
- break;
- case XFER_MW_DMA_2:
- strobe = ATA_DMA2_STROBE;
- hold = ATA_DMA2_HOLD;
- break;
- }
-
- if (speed >= XFER_UDMA_0)
- cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0);
- else
- cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
-}
-
-static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base)
-{
- int i;
-
- memset(hw, 0, sizeof(*hw));
-
- for (i = 0; i <= 7; i++)
- hw->io_ports_array[i] = base + cris_ide_reg_addr(i, 0, 1);
-
- /*
- * the IDE control register is at ATA address 6,
- * with CS1 active instead of CS0
- */
- hw->io_ports.ctl_addr = base + cris_ide_reg_addr(6, 1, 0);
-
- hw->irq = ide_default_irq(0);
- hw->ack_intr = cris_ide_ack_intr;
-}
-
-static const struct ide_port_ops cris_port_ops = {
- .set_pio_mode = cris_set_pio_mode,
- .set_dma_mode = cris_set_dma_mode,
-};
-
-static const struct ide_dma_ops cris_dma_ops;
-
-static const struct ide_port_info cris_port_info __initdata = {
- .chipset = ide_etrax100,
- .port_ops = &cris_port_ops,
- .dma_ops = &cris_dma_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_NO_DMA, /* no SFF-style DMA */
- .pio_mask = ATA_PIO4,
- .udma_mask = cris_ultra_mask,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int __init init_e100_ide(void)
-{
- hw_regs_t hw;
- int h;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-
- printk("ide: ETRAX FS built-in ATA DMA controller\n");
-
- for (h = 0; h < 4; h++) {
- ide_hwif_t *hwif = NULL;
-
- cris_setup_ports(&hw, cris_ide_base_address(h));
-
- hwif = ide_find_port();
- if (hwif == NULL)
- continue;
- ide_init_port_data(hwif, hwif->index);
- ide_init_port_hw(hwif, &hw);
-
- hwif->ata_input_data = &cris_ide_input_data;
- hwif->ata_output_data = &cris_ide_output_data;
- hwif->atapi_input_bytes = &cris_atapi_input_bytes;
- hwif->atapi_output_bytes = &cris_atapi_output_bytes;
- hwif->OUTB = &cris_ide_outb;
- hwif->OUTW = &cris_ide_outw;
- hwif->OUTBSYNC = &cris_ide_outbsync;
- hwif->INB = &cris_ide_inb;
- hwif->INW = &cris_ide_inw;
- hwif->cbl = ATA_CBL_PATA40;
-
- idx[h] = hwif->index;
- }
-
- /* Reset pulse */
- cris_ide_reset(0);
- udelay(25);
- cris_ide_reset(1);
-
- cris_ide_init();
-
- cris_ide_set_speed(TYPE_PIO, ATA_PIO4_SETUP, ATA_PIO4_STROBE, ATA_PIO4_HOLD);
- cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD);
- cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
-
- ide_device_add(idx, &cris_port_info);
-
- return 0;
-}
-
-static cris_dma_descr_type mydescr __attribute__ ((__aligned__(16)));
-
-/*
- * The following routines are mainly used by the ATAPI drivers.
- *
- * These routines will round up any request for an odd number of bytes,
- * so if an odd bytecount is specified, be sure that there's at least one
- * extra byte allocated for the buffer.
- */
-static void
-cris_atapi_input_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount)
-{
- D(printk("atapi_input_bytes, buffer 0x%x, count %d\n",
- buffer, bytecount));
-
- if(bytecount & 1) {
- printk("warning, odd bytecount in cdrom_in_bytes = %d.\n", bytecount);
- bytecount++; /* to round off */
- }
-
- /* setup DMA and start transfer */
-
- cris_ide_fill_descriptor(&mydescr, buffer, bytecount, 1);
- cris_ide_start_dma(drive, &mydescr, 1, TYPE_PIO, bytecount);
-
- /* wait for completion */
- LED_DISK_READ(1);
- cris_ide_wait_dma(1);
- LED_DISK_READ(0);
-}
-
-static void
-cris_atapi_output_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount)
-{
- D(printk("atapi_output_bytes, buffer 0x%x, count %d\n",
- buffer, bytecount));
-
- if(bytecount & 1) {
- printk("odd bytecount %d in atapi_out_bytes!\n", bytecount);
- bytecount++;
- }
-
- cris_ide_fill_descriptor(&mydescr, buffer, bytecount, 1);
- cris_ide_start_dma(drive, &mydescr, 0, TYPE_PIO, bytecount);
-
- /* wait for completion */
-
- LED_DISK_WRITE(1);
- LED_DISK_READ(1);
- cris_ide_wait_dma(0);
- LED_DISK_WRITE(0);
-}
-
-/*
- * This is used for most PIO data transfers *from* the IDE interface
- */
-static void
-cris_ide_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
-{
- cris_atapi_input_bytes(drive, buffer, wcount << 2);
-}
-
-/*
- * This is used for most PIO data transfers *to* the IDE interface
- */
-static void
-cris_ide_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
-{
- cris_atapi_output_bytes(drive, buffer, wcount << 2);
-}
-
-/* we only have one DMA channel on the chip for ATA, so we can keep these statically */
-static cris_dma_descr_type ata_descrs[MAX_DMA_DESCRS] __attribute__ ((__aligned__(16)));
-static unsigned int ata_tot_size;
-
-/*
- * cris_ide_build_dmatable() prepares a dma request.
- * Returns 0 if all went okay, returns 1 otherwise.
- */
-static int cris_ide_build_dmatable (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct scatterlist* sg;
- struct request *rq = drive->hwif->hwgroup->rq;
- unsigned long size, addr;
- unsigned int count = 0;
- int i = 0;
-
- sg = hwif->sg_table;
-
- ata_tot_size = 0;
-
- ide_map_sg(drive, rq);
- i = hwif->sg_nents;
-
- while(i) {
- /*
- * Determine addr and size of next buffer area. We assume that
- * individual virtual buffers are always composed linearly in
- * physical memory. For example, we assume that any 8kB buffer
- * is always composed of two adjacent physical 4kB pages rather
- * than two possibly non-adjacent physical 4kB pages.
- */
- /* group sequential buffers into one large buffer */
- addr = sg_phys(sg);
- size = sg_dma_len(sg);
- while (--i) {
- sg = sg_next(sg);
- if ((addr + size) != sg_phys(sg))
- break;
- size += sg_dma_len(sg);
- }
-
- /* did we run out of descriptors? */
-
- if(count >= MAX_DMA_DESCRS) {
- printk("%s: too few DMA descriptors\n", drive->name);
- return 1;
- }
-
- /* however, this case is more difficult - rw_trf_cnt cannot be more
- than 65536 words per transfer, so in that case we need to either
- 1) use a DMA interrupt to re-trigger rw_trf_cnt and continue with
- the descriptors, or
- 2) simply do the request here, and get dma_intr to only ide_end_request on
- those blocks that were actually set-up for transfer.
- */
-
- if(ata_tot_size + size > 131072) {
- printk("too large total ATA DMA request, %d + %d!\n", ata_tot_size, (int)size);
- return 1;
- }
-
- /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. Since we
- don't handle size > 131072 only one split is necessary */
-
- if(size > MAX_DESCR_SIZE) {
- cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, MAX_DESCR_SIZE, 0);
- count++;
- ata_tot_size += MAX_DESCR_SIZE;
- size -= MAX_DESCR_SIZE;
- addr += MAX_DESCR_SIZE;
- }
-
- cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, size,i ? 0 : 1);
- count++;
- ata_tot_size += size;
- }
-
- if (count) {
- /* return and say all is ok */
- return 0;
- }
-
- printk("%s: empty DMA table?\n", drive->name);
- return 1; /* let the PIO routines handle this weirdness */
-}
-
-/*
- * cris_dma_intr() is the handler for disk read/write DMA interrupts
- */
-static ide_startstop_t cris_dma_intr (ide_drive_t *drive)
-{
- LED_DISK_READ(0);
- LED_DISK_WRITE(0);
-
- return ide_dma_intr(drive);
-}
-
-/*
- * Functions below initiates/aborts DMA read/write operations on a drive.
- *
- * The caller is assumed to have selected the drive and programmed the drive's
- * sector address using CHS or LBA. All that remains is to prepare for DMA
- * and then issue the actual read/write DMA/PIO command to the drive.
- *
- * For ATAPI devices, we just prepare for DMA and return. The caller should
- * then issue the packet command to the drive and call us again with
- * cris_dma_start afterwards.
- *
- * Returns 0 if all went well.
- * Returns 1 if DMA read/write could not be started, in which case
- * the caller should revert to PIO for the current request.
- */
-
-static int cris_dma_end(ide_drive_t *drive)
-{
- drive->waiting_for_dma = 0;
- return 0;
-}
-
-static int cris_dma_setup(ide_drive_t *drive)
-{
- struct request *rq = drive->hwif->hwgroup->rq;
-
- cris_ide_initialize_dma(!rq_data_dir(rq));
- if (cris_ide_build_dmatable (drive)) {
- ide_map_sg(drive, rq);
- return 1;
- }
-
- drive->waiting_for_dma = 1;
- return 0;
-}
-
-static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command)
-{
- ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL);
-}
-
-static void cris_dma_start(ide_drive_t *drive)
-{
- struct request *rq = drive->hwif->hwgroup->rq;
- int writing = rq_data_dir(rq);
- int type = TYPE_DMA;
-
- if (drive->current_speed >= XFER_UDMA_0)
- type = TYPE_UDMA;
-
- cris_ide_start_dma(drive, &ata_descrs[0], writing ? 0 : 1, type, ata_tot_size);
-
- if (writing) {
- LED_DISK_WRITE(1);
- } else {
- LED_DISK_READ(1);
- }
-}
-
-static const struct ide_dma_ops cris_dma_ops = {
- .dma_host_set = cris_dma_host_set,
- .dma_setup = cris_dma_setup,
- .dma_exec_cmd = cris_dma_exec_cmd,
- .dma_start = cris_dma_start,
- .dma_end = cris_dma_end,
- .dma_test_irq = cris_dma_test_irq,
-};
-
-module_init(init_e100_ide);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index fd23f12..ecf53bb 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -42,6 +42,91 @@ static u16 mm_inw(unsigned long a)
return r;
}

+static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+ u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+ if (task->tf_flags & IDE_TFLAG_FLAGGED)
+ HIHI = 0xFF;
+
+ ide_set_irq(drive, 1);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DATA)
+ mm_outw((tf->hob_data << 8) | tf->data, io_ports->data_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+ outb(tf->hob_feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+ outb(tf->hob_nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+ outb(tf->hob_lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+ outb(tf->hob_lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+ outb(tf->hob_lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+ outb(tf->feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+ outb(tf->nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+ outb(tf->lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+ outb(tf->lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+ outb(tf->lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+ outb((tf->device & HIHI) | drive->select.all,
+ io_ports->device_addr);
+}
+
+static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+
+ if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+ u16 data = mm_inw(io_ports->data_addr);
+
+ tf->data = data & 0xff;
+ tf->hob_data = (data >> 8) & 0xff;
+ }
+
+ /* be sure we're looking at the low order bits */
+ outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+ tf->nsect = inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+ tf->lbal = inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+ tf->lbam = inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+ tf->lbah = inb(io_ports->lbah_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+ tf->device = inb(io_ports->device_addr);
+
+ if (task->tf_flags & IDE_TFLAG_LBA48) {
+ outb(drive->ctl | 0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+ tf->hob_feature = inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+ tf->hob_nsect = inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+ tf->hob_lbal = inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+ tf->hob_lbam = inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+ tf->hob_lbah = inb(io_ports->lbah_addr);
+ }
+}
+
static void mm_outsw(unsigned long addr, void *buf, u32 len)
{
unsigned short *bp = (unsigned short *)buf;
@@ -56,6 +141,18 @@ static void mm_insw(unsigned long addr, void *buf, u32 len)
*bp = bswap(*(volatile u16 *)addr);
}

+static void h8300_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ mm_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
+}
+
+static void h8300_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
+}
+
#define H8300_IDE_GAP (2)

static inline void hw_setup(hw_regs_t *hw)
@@ -74,12 +171,11 @@ static inline void hwif_setup(ide_hwif_t *hwif)
{
default_hwif_iops(hwif);

- hwif->OUTW = mm_outw;
- hwif->OUTSW = mm_outsw;
- hwif->INW = mm_inw;
- hwif->INSW = mm_insw;
- hwif->OUTSL = NULL;
- hwif->INSL = NULL;
+ hwif->tf_load = h8300_tf_load;
+ hwif->tf_read = h8300_tf_read;
+
+ hwif->input_data = h8300_input_data;
+ hwif->output_data = h8300_output_data;
}

static int __init h8300_ide_init(void)
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index b34fd2b..fe9df38 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -142,7 +142,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
{
unsigned long sector;
unsigned long bio_sectors;
- unsigned long valid;
struct cdrom_info *info = drive->driver_data;

if (!cdrom_log_sense(drive, failed_command, sense))
@@ -173,17 +172,13 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
(sense->information[2] << 8) |
(sense->information[3]);

- bio_sectors = bio_sectors(failed_command->bio);
- if (bio_sectors < 4)
- bio_sectors = 4;
if (drive->queue->hardsect_size == 2048)
/* device sector size is 2K */
sector <<= 2;
+
+ bio_sectors = max(bio_sectors(failed_command->bio), 4U);
sector &= ~(bio_sectors - 1);
- valid = (sector - failed_command->sector) << 9;

- if (valid < 0)
- valid = 0;
if (sector < get_capacity(info->disk) &&
drive->probed_capacity - sector < 4 * 75)
set_capacity(info->disk, sector);
@@ -555,14 +550,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
ATAPI_WAIT_PC, cdrom_timer_expiry);
return ide_started;
} else {
- unsigned long flags;
-
- /* packet command */
- spin_lock_irqsave(&ide_lock, flags);
- hwif->OUTBSYNC(drive, WIN_PACKETCMD,
- hwif->io_ports.command_addr);
- ndelay(400);
- spin_unlock_irqrestore(&ide_lock, flags);
+ ide_execute_pkt_cmd(drive);

return (*handler) (drive);
}
@@ -613,7 +601,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
cmd_len = ATAPI_MIN_CDB_BYTES;

/* send the command to the device */
- HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len);
+ hwif->output_data(drive, NULL, rq->cmd, cmd_len);

/* start the DMA if need be */
if (info->dma)
@@ -629,7 +617,7 @@ static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
{
while (len > 0) {
int dum = 0;
- xf(drive, &dum, sizeof(dum));
+ xf(drive, NULL, &dum, sizeof(dum));
len -= sizeof(dum);
}
}
@@ -639,7 +627,7 @@ static void ide_cd_drain_data(ide_drive_t *drive, int nsects)
while (nsects > 0) {
static char dum[SECTOR_SIZE];

- drive->hwif->atapi_input_bytes(drive, dum, sizeof(dum));
+ drive->hwif->input_data(drive, NULL, dum, sizeof(dum));
nsects--;
}
}
@@ -666,7 +654,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
drive->name, __func__);

- xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes;
+ xf = rw ? hwif->output_data : hwif->input_data;
ide_cd_pad_transfer(drive, xf, len);
} else if (rw == 0 && ireason == 1) {
/*
@@ -1019,10 +1007,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)

if (ireason == 0) {
write = 1;
- xferfunc = HWIF(drive)->atapi_output_bytes;
+ xferfunc = hwif->output_data;
} else {
write = 0;
- xferfunc = HWIF(drive)->atapi_input_bytes;
+ xferfunc = hwif->input_data;
}

/* transfer data */
@@ -1061,7 +1049,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
if (blen > thislen)
blen = thislen;

- xferfunc(drive, ptr, blen);
+ xferfunc(drive, NULL, ptr, blen);

thislen -= blen;
len -= blen;
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index c352cf2..653b1ad 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -464,9 +464,10 @@ int ide_dma_setup(ide_drive_t *drive)

/* PRD table */
if (hwif->mmio)
- writel(hwif->dmatable_dma, (void __iomem *)hwif->dma_prdtable);
+ writel(hwif->dmatable_dma,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
else
- outl(hwif->dmatable_dma, hwif->dma_prdtable);
+ outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);

/* specify r/w */
hwif->OUTB(reading, hwif->dma_command);
@@ -858,14 +859,8 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)

if (!hwif->dma_command)
hwif->dma_command = hwif->dma_base + 0;
- if (!hwif->dma_vendor1)
- hwif->dma_vendor1 = hwif->dma_base + 1;
if (!hwif->dma_status)
hwif->dma_status = hwif->dma_base + 2;
- if (!hwif->dma_vendor3)
- hwif->dma_vendor3 = hwif->dma_base + 3;
- if (!hwif->dma_prdtable)
- hwif->dma_prdtable = hwif->dma_base + 4;

hwif->dma_ops = &sff_dma_ops;
}
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 489079b..f05fbc2 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -231,6 +231,7 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount, int direction)
{
+ ide_hwif_t *hwif = drive->hwif;
struct request *rq = pc->rq;
struct req_iterator iter;
struct bio_vec *bvec;
@@ -246,9 +247,9 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,

data = bvec_kmap_irq(bvec, &flags);
if (direction)
- drive->hwif->atapi_output_bytes(drive, data, count);
+ hwif->output_data(drive, NULL, data, count);
else
- drive->hwif->atapi_input_bytes(drive, data, count);
+ hwif->input_data(drive, NULL, data, count);
bvec_kunmap_irq(data, &flags);

bcount -= count;
@@ -261,10 +262,7 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
if (bcount) {
printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
drive->name, __func__, bcount);
- if (direction)
- ide_atapi_write_zeros(drive, bcount);
- else
- ide_atapi_discard_data(drive, bcount);
+ ide_pad_transfer(drive, direction, bcount);
}
}

@@ -490,7 +488,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
printk(KERN_ERR "ide-floppy: The floppy wants "
"to send us more data than expected "
"- discarding data\n");
- ide_atapi_discard_data(drive, bcount);
+ ide_pad_transfer(drive, 0, bcount);

ide_set_handler(drive,
&idefloppy_pc_intr,
@@ -503,12 +501,12 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
}
}
if (pc->flags & PC_FLAG_WRITING)
- xferfunc = hwif->atapi_output_bytes;
+ xferfunc = hwif->output_data;
else
- xferfunc = hwif->atapi_input_bytes;
+ xferfunc = hwif->input_data;

if (pc->buf)
- xferfunc(drive, pc->cur_pos, bcount);
+ xferfunc(drive, NULL, pc->cur_pos, bcount);
else
ide_floppy_io_buffers(drive, pc, bcount,
!!(pc->flags & PC_FLAG_WRITING));
@@ -548,8 +546,10 @@ static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)

/* Set the interrupt routine */
ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
+
/* Send the actual packet */
- HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
+ hwif->output_data(drive, NULL, floppy->pc->c, 12);
+
return ide_started;
}

@@ -569,7 +569,8 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive)
idefloppy_floppy_t *floppy = drive->driver_data;

/* Send the actual packet */
- HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
+ drive->hwif->output_data(drive, NULL, floppy->pc->c, 12);
+
/* Timeout for the packet command */
return IDEFLOPPY_WAIT_CMD;
}
@@ -692,7 +693,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
return ide_started;
} else {
/* Issue the packet command */
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ ide_execute_pkt_cmd(drive);
return (*pkt_xfer_routine) (drive);
}
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 3a2d893..788783d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -295,49 +295,6 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
spin_unlock_irqrestore(&ide_lock, flags);
}

-void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &task->tf;
-
- if (task->tf_flags & IDE_TFLAG_IN_DATA) {
- u16 data = hwif->INW(io_ports->data_addr);
-
- tf->data = data & 0xff;
- tf->hob_data = (data >> 8) & 0xff;
- }
-
- /* be sure we're looking at the low order bits */
- hwif->OUTB(drive->ctl & ~0x80, io_ports->ctl_addr);
-
- if (task->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = hwif->INB(io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = hwif->INB(io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = hwif->INB(io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = hwif->INB(io_ports->lbah_addr);
- if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = hwif->INB(io_ports->device_addr);
-
- if (task->tf_flags & IDE_TFLAG_LBA48) {
- hwif->OUTB(drive->ctl | 0x80, io_ports->ctl_addr);
-
- if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
- tf->hob_feature = hwif->INB(io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = hwif->INB(io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = hwif->INB(io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = hwif->INB(io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = hwif->INB(io_ports->lbah_addr);
- }
-}
-
/**
* ide_end_drive_cmd - end an explicit drive command
* @drive: command
@@ -373,7 +330,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
tf->error = err;
tf->status = stat;

- ide_tf_read(drive, task);
+ drive->hwif->tf_read(drive, task);

if (task->tf_flags & IDE_TFLAG_DYN)
kfree(task);
@@ -422,7 +379,7 @@ static void try_to_flush_leftover_data (ide_drive_t *drive)
u32 wcount = (i > 16) ? 16 : i;

i -= wcount;
- HWIF(drive)->ata_input_data(drive, buffer, wcount);
+ drive->hwif->input_data(drive, NULL, buffer, wcount * 4);
}
}

@@ -502,7 +459,8 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u

if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->io_ports.command_addr);

if (rq->errors >= ERROR_MAX) {
ide_kill_rq(drive, rq);
@@ -1679,7 +1637,23 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
task.tf.lbam = bcount & 0xff;
task.tf.lbah = (bcount >> 8) & 0xff;

- ide_tf_load(drive, &task);
+ ide_tf_dump(drive->name, &task.tf);
+ drive->hwif->tf_load(drive, &task);
}

EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
+
+void ide_pad_transfer(ide_drive_t *drive, int write, int len)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 buf[4] = { 0 };
+
+ while (len > 0) {
+ if (write)
+ hwif->output_data(drive, NULL, buf, min(4, len));
+ else
+ hwif->input_data(drive, NULL, buf, min(4, len));
+ len -= 4;
+ }
+}
+EXPORT_SYMBOL_GPL(ide_pad_transfer);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 5425d30..57d9a9a 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -37,21 +37,6 @@ static u8 ide_inb (unsigned long port)
return (u8) inb(port);
}

-static u16 ide_inw (unsigned long port)
-{
- return (u16) inw(port);
-}
-
-static void ide_insw (unsigned long port, void *addr, u32 count)
-{
- insw(port, addr, count);
-}
-
-static void ide_insl (unsigned long port, void *addr, u32 count)
-{
- insl(port, addr, count);
-}
-
static void ide_outb (u8 val, unsigned long port)
{
outb(val, port);
@@ -62,32 +47,11 @@ static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port)
outb(addr, port);
}

-static void ide_outw (u16 val, unsigned long port)
-{
- outw(val, port);
-}
-
-static void ide_outsw (unsigned long port, void *addr, u32 count)
-{
- outsw(port, addr, count);
-}
-
-static void ide_outsl (unsigned long port, void *addr, u32 count)
-{
- outsl(port, addr, count);
-}
-
void default_hwif_iops (ide_hwif_t *hwif)
{
hwif->OUTB = ide_outb;
hwif->OUTBSYNC = ide_outbsync;
- hwif->OUTW = ide_outw;
- hwif->OUTSW = ide_outsw;
- hwif->OUTSL = ide_outsl;
hwif->INB = ide_inb;
- hwif->INW = ide_inw;
- hwif->INSW = ide_insw;
- hwif->INSL = ide_insl;
}

/*
@@ -99,21 +63,6 @@ static u8 ide_mm_inb (unsigned long port)
return (u8) readb((void __iomem *) port);
}

-static u16 ide_mm_inw (unsigned long port)
-{
- return (u16) readw((void __iomem *) port);
-}
-
-static void ide_mm_insw (unsigned long port, void *addr, u32 count)
-{
- __ide_mm_insw((void __iomem *) port, addr, count);
-}
-
-static void ide_mm_insl (unsigned long port, void *addr, u32 count)
-{
- __ide_mm_insl((void __iomem *) port, addr, count);
-}
-
static void ide_mm_outb (u8 value, unsigned long port)
{
writeb(value, (void __iomem *) port);
@@ -124,34 +73,13 @@ static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
writeb(value, (void __iomem *) port);
}

-static void ide_mm_outw (u16 value, unsigned long port)
-{
- writew(value, (void __iomem *) port);
-}
-
-static void ide_mm_outsw (unsigned long port, void *addr, u32 count)
-{
- __ide_mm_outsw((void __iomem *) port, addr, count);
-}
-
-static void ide_mm_outsl (unsigned long port, void *addr, u32 count)
-{
- __ide_mm_outsl((void __iomem *) port, addr, count);
-}
-
void default_hwif_mmiops (ide_hwif_t *hwif)
{
hwif->OUTB = ide_mm_outb;
/* Most systems will need to override OUTBSYNC, alas however
this one is controller specific! */
hwif->OUTBSYNC = ide_mm_outbsync;
- hwif->OUTW = ide_mm_outw;
- hwif->OUTSW = ide_mm_outsw;
- hwif->OUTSL = ide_mm_outsl;
hwif->INB = ide_mm_inb;
- hwif->INW = ide_mm_inw;
- hwif->INSW = ide_mm_insw;
- hwif->INSL = ide_mm_insl;
}

EXPORT_SYMBOL(default_hwif_mmiops);
@@ -175,6 +103,123 @@ void SELECT_MASK (ide_drive_t *drive, int mask)
port_ops->maskproc(drive, mask);
}

+static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+ void (*tf_outb)(u8 addr, unsigned long port);
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+ if (mmio)
+ tf_outb = ide_mm_outb;
+ else
+ tf_outb = ide_outb;
+
+ if (task->tf_flags & IDE_TFLAG_FLAGGED)
+ HIHI = 0xFF;
+
+ ide_set_irq(drive, 1);
+
+ if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0)
+ SELECT_MASK(drive, 0);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+ u16 data = (tf->hob_data << 8) | tf->data;
+
+ if (mmio)
+ writew(data, (void __iomem *)io_ports->data_addr);
+ else
+ outw(data, io_ports->data_addr);
+ }
+
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+ tf_outb(tf->hob_feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+ tf_outb(tf->hob_nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+ tf_outb(tf->hob_lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+ tf_outb(tf->hob_lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+ tf_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+ tf_outb(tf->feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+ tf_outb(tf->nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+ tf_outb(tf->lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+ tf_outb(tf->lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+ tf_outb(tf->lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+ tf_outb((tf->device & HIHI) | drive->select.all,
+ io_ports->device_addr);
+}
+
+static void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+ void (*tf_outb)(u8 addr, unsigned long port);
+ u8 (*tf_inb)(unsigned long port);
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+
+ if (mmio) {
+ tf_outb = ide_mm_outb;
+ tf_inb = ide_mm_inb;
+ } else {
+ tf_outb = ide_outb;
+ tf_inb = ide_inb;
+ }
+
+ if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+ u16 data;
+
+ if (mmio)
+ data = readw((void __iomem *)io_ports->data_addr);
+ else
+ data = inw(io_ports->data_addr);
+
+ tf->data = data & 0xff;
+ tf->hob_data = (data >> 8) & 0xff;
+ }
+
+ /* be sure we're looking at the low order bits */
+ tf_outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+ tf->nsect = tf_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+ tf->lbal = tf_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+ tf->lbam = tf_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+ tf->lbah = tf_inb(io_ports->lbah_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+ tf->device = tf_inb(io_ports->device_addr);
+
+ if (task->tf_flags & IDE_TFLAG_LBA48) {
+ tf_outb(drive->ctl | 0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+ tf->hob_feature = tf_inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+ tf->hob_nsect = tf_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+ tf->hob_lbal = tf_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+ tf->hob_lbam = tf_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+ tf->hob_lbah = tf_inb(io_ports->lbah_addr);
+ }
+}
+
/*
* Some localbus EIDE interfaces require a special access sequence
* when using 32-bit I/O instructions to transfer data. We call this
@@ -182,109 +227,112 @@ void SELECT_MASK (ide_drive_t *drive, int mask)
* of the sector count register location, with interrupts disabled
* to ensure that the reads all happen together.
*/
-static void ata_vlb_sync(ide_drive_t *drive, unsigned long port)
+static void ata_vlb_sync(unsigned long port)
{
- (void) HWIF(drive)->INB(port);
- (void) HWIF(drive)->INB(port);
- (void) HWIF(drive)->INB(port);
+ (void)inb(port);
+ (void)inb(port);
+ (void)inb(port);
}

/*
* This is used for most PIO data transfers *from* the IDE interface
+ *
+ * These routines will round up any request for an odd number of bytes,
+ * so if an odd len is specified, be sure that there's at least one
+ * extra byte allocated for the buffer.
*/
-static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount)
+static void ata_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
+ unsigned long data_addr = io_ports->data_addr;
u8 io_32bit = drive->io_32bit;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+
+ len++;

if (io_32bit) {
- if (io_32bit & 2) {
- unsigned long flags;
+ unsigned long uninitialized_var(flags);

+ if ((io_32bit & 2) && !mmio) {
local_irq_save(flags);
- ata_vlb_sync(drive, io_ports->nsect_addr);
- hwif->INSL(io_ports->data_addr, buffer, wcount);
+ ata_vlb_sync(io_ports->nsect_addr);
+ }
+
+ if (mmio)
+ __ide_mm_insl((void __iomem *)data_addr, buf, len / 4);
+ else
+ insl(data_addr, buf, len / 4);
+
+ if ((io_32bit & 2) && !mmio)
local_irq_restore(flags);
- } else
- hwif->INSL(io_ports->data_addr, buffer, wcount);
- } else
- hwif->INSW(io_ports->data_addr, buffer, wcount << 1);
+
+ if ((len & 3) >= 2) {
+ if (mmio)
+ __ide_mm_insw((void __iomem *)data_addr,
+ (u8 *)buf + (len & ~3), 1);
+ else
+ insw(data_addr, (u8 *)buf + (len & ~3), 1);
+ }
+ } else {
+ if (mmio)
+ __ide_mm_insw((void __iomem *)data_addr, buf, len / 2);
+ else
+ insw(data_addr, buf, len / 2);
+ }
}

/*
* This is used for most PIO data transfers *to* the IDE interface
*/
-static void ata_output_data(ide_drive_t *drive, void *buffer, u32 wcount)
+static void ata_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
+ unsigned long data_addr = io_ports->data_addr;
u8 io_32bit = drive->io_32bit;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;

if (io_32bit) {
- if (io_32bit & 2) {
- unsigned long flags;
+ unsigned long uninitialized_var(flags);

+ if ((io_32bit & 2) && !mmio) {
local_irq_save(flags);
- ata_vlb_sync(drive, io_ports->nsect_addr);
- hwif->OUTSL(io_ports->data_addr, buffer, wcount);
- local_irq_restore(flags);
- } else
- hwif->OUTSL(io_ports->data_addr, buffer, wcount);
- } else
- hwif->OUTSW(io_ports->data_addr, buffer, wcount << 1);
-}
-
-/*
- * The following routines are mainly used by the ATAPI drivers.
- *
- * These routines will round up any request for an odd number of bytes,
- * so if an odd bytecount is specified, be sure that there's at least one
- * extra byte allocated for the buffer.
- */
-
-static void atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
-{
- ide_hwif_t *hwif = HWIF(drive);
+ ata_vlb_sync(io_ports->nsect_addr);
+ }

- ++bytecount;
-#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
- if (MACH_IS_ATARI || MACH_IS_Q40) {
- /* Atari has a byte-swapped IDE interface */
- insw_swapw(hwif->io_ports.data_addr, buffer, bytecount / 2);
- return;
- }
-#endif /* CONFIG_ATARI || CONFIG_Q40 */
- hwif->ata_input_data(drive, buffer, bytecount / 4);
- if ((bytecount & 0x03) >= 2)
- hwif->INSW(hwif->io_ports.data_addr,
- (u8 *)buffer + (bytecount & ~0x03), 1);
-}
+ if (mmio)
+ __ide_mm_outsl((void __iomem *)data_addr, buf, len / 4);
+ else
+ outsl(data_addr, buf, len / 4);

-static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
-{
- ide_hwif_t *hwif = HWIF(drive);
+ if ((io_32bit & 2) && !mmio)
+ local_irq_restore(flags);

- ++bytecount;
-#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
- if (MACH_IS_ATARI || MACH_IS_Q40) {
- /* Atari has a byte-swapped IDE interface */
- outsw_swapw(hwif->io_ports.data_addr, buffer, bytecount / 2);
- return;
+ if ((len & 3) >= 2) {
+ if (mmio)
+ __ide_mm_outsw((void __iomem *)data_addr,
+ (u8 *)buf + (len & ~3), 1);
+ else
+ outsw(data_addr, (u8 *)buf + (len & ~3), 1);
+ }
+ } else {
+ if (mmio)
+ __ide_mm_outsw((void __iomem *)data_addr, buf, len / 2);
+ else
+ outsw(data_addr, buf, len / 2);
}
-#endif /* CONFIG_ATARI || CONFIG_Q40 */
- hwif->ata_output_data(drive, buffer, bytecount / 4);
- if ((bytecount & 0x03) >= 2)
- hwif->OUTSW(hwif->io_ports.data_addr,
- (u8 *)buffer + (bytecount & ~0x03), 1);
}

void default_hwif_transport(ide_hwif_t *hwif)
{
- hwif->ata_input_data = ata_input_data;
- hwif->ata_output_data = ata_output_data;
- hwif->atapi_input_bytes = atapi_input_bytes;
- hwif->atapi_output_bytes = atapi_output_bytes;
+ hwif->tf_load = ide_tf_load;
+ hwif->tf_read = ide_tf_read;
+
+ hwif->input_data = ata_input_data;
+ hwif->output_data = ata_output_data;
}

void ide_fix_driveid (struct hd_driveid *id)
@@ -577,6 +625,8 @@ static const struct drive_list_entry ivb_list[] = {
{ "TSSTcorp CDDVDW SH-S202J" , "SB01" },
{ "TSSTcorp CDDVDW SH-S202N" , "SB00" },
{ "TSSTcorp CDDVDW SH-S202N" , "SB01" },
+ { "TSSTcorp CDDVDW SH-S202H" , "SB00" },
+ { "TSSTcorp CDDVDW SH-S202H" , "SB01" },
{ NULL , NULL }
};

@@ -641,7 +691,7 @@ int ide_driveid_update(ide_drive_t *drive)
SELECT_MASK(drive, 1);
ide_set_irq(drive, 1);
msleep(50);
- hwif->OUTB(WIN_IDENTIFY, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr);
timeout = jiffies + WAIT_WORSTCASE;
do {
if (time_after(jiffies, timeout)) {
@@ -668,7 +718,7 @@ int ide_driveid_update(ide_drive_t *drive)
local_irq_restore(flags);
return 0;
}
- hwif->ata_input_data(drive, id, SECTOR_WORDS);
+ hwif->input_data(drive, NULL, id, SECTOR_SIZE);
(void)ide_read_status(drive); /* clear drive IRQ */
local_irq_enable();
local_irq_restore(flags);
@@ -849,9 +899,19 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);
}
-
EXPORT_SYMBOL(ide_execute_command);

+void ide_execute_pkt_cmd(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD, hwif->io_ports.command_addr);
+ ndelay(400);
+ spin_unlock_irqrestore(&ide_lock, flags);
+}
+EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd);

/* needed below */
static ide_startstop_t do_reset1 (ide_drive_t *, int);
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 6f04ea3..47af80d 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -487,7 +487,7 @@ static void ide_dump_sector(ide_drive_t *drive)
else
task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE;

- ide_tf_read(drive, &task);
+ drive->hwif->tf_read(drive, &task);

if (lba48 || (tf->device & ATA_LBA))
printk(", LBAsect=%llu",
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 862f026..099a0fe 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -124,7 +124,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)

id = drive->id;
/* read 512 bytes of id info */
- hwif->ata_input_data(drive, id, SECTOR_WORDS);
+ hwif->input_data(drive, NULL, id, SECTOR_SIZE);

drive->id_read = 1;
local_irq_enable();
@@ -293,7 +293,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
hwif->OUTB(0, io_ports->feature_addr);

/* ask drive for ID */
- hwif->OUTB(cmd, io_ports->command_addr);
+ hwif->OUTBSYNC(drive, cmd, io_ports->command_addr);

timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
@@ -480,7 +480,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
msleep(50);
hwif->OUTB(drive->select.all, io_ports->device_addr);
msleep(50);
- hwif->OUTB(WIN_SRST, io_ports->command_addr);
+ hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
@@ -516,7 +516,7 @@ static void enable_nest (ide_drive_t *drive)
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);

if (ide_busy_sleep(hwif)) {
printk(KERN_CONT "failed (timeout)\n");
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 29870c4..54a43b0 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -395,13 +395,13 @@ static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_input_buffers\n");
- ide_atapi_discard_data(drive, bcount);
+ ide_pad_transfer(drive, 0, bcount);
return;
}
count = min(
(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
bcount);
- HWIF(drive)->atapi_input_bytes(drive, bh->b_data +
+ drive->hwif->input_data(drive, NULL, bh->b_data +
atomic_read(&bh->b_count), count);
bcount -= count;
atomic_add(count, &bh->b_count);
@@ -427,7 +427,7 @@ static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
return;
}
count = min((unsigned int)pc->b_count, (unsigned int)bcount);
- HWIF(drive)->atapi_output_bytes(drive, pc->b_data, count);
+ drive->hwif->output_data(drive, NULL, pc->b_data, count);
bcount -= count;
pc->b_data += count;
pc->b_count -= count;
@@ -871,7 +871,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
printk(KERN_ERR "ide-tape: The tape wants to "
"send us more data than expected "
"- discarding data\n");
- ide_atapi_discard_data(drive, bcount);
+ ide_pad_transfer(drive, 0, bcount);
ide_set_handler(drive, &idetape_pc_intr,
IDETAPE_WAIT_CMD, NULL);
return ide_started;
@@ -880,16 +880,16 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
"data than expected - allowing transfer\n");
}
iobuf = &idetape_input_buffers;
- xferfunc = hwif->atapi_input_bytes;
+ xferfunc = hwif->input_data;
} else {
iobuf = &idetape_output_buffers;
- xferfunc = hwif->atapi_output_bytes;
+ xferfunc = hwif->output_data;
}

if (pc->bh)
iobuf(drive, pc, bcount);
else
- xferfunc(drive, pc->cur_pos, bcount);
+ xferfunc(drive, NULL, pc->cur_pos, bcount);

/* Update the current position */
pc->xferred += bcount;
@@ -979,7 +979,8 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
hwif->dma_ops->dma_start(drive);
#endif
/* Send the actual packet */
- HWIF(drive)->atapi_output_bytes(drive, pc->c, 12);
+ hwif->output_data(drive, NULL, pc->c, 12);
+
return ide_started;
}

@@ -1055,7 +1056,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
IDETAPE_WAIT_CMD, NULL);
return ide_started;
} else {
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ ide_execute_pkt_cmd(drive);
return idetape_transfer_pc(drive);
}
}
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 9f9ad9f..9a846a0 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -33,60 +33,18 @@
#include
#include

-void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+void ide_tf_dump(const char *s, struct ide_taskfile *tf)
{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &task->tf;
- u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
-
- if (task->tf_flags & IDE_TFLAG_FLAGGED)
- HIHI = 0xFF;
-
#ifdef DEBUG
printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x "
"lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n",
- drive->name, tf->feature, tf->nsect, tf->lbal,
+ s, tf->feature, tf->nsect, tf->lbal,
tf->lbam, tf->lbah, tf->device, tf->command);
printk("%s: hob: nsect 0x%02x lbal 0x%02x "
"lbam 0x%02x lbah 0x%02x\n",
- drive->name, tf->hob_nsect, tf->hob_lbal,
+ s, tf->hob_nsect, tf->hob_lbal,
tf->hob_lbam, tf->hob_lbah);
#endif
-
- ide_set_irq(drive, 1);
-
- if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0)
- SELECT_MASK(drive, 0);
-
- if (task->tf_flags & IDE_TFLAG_OUT_DATA)
- hwif->OUTW((tf->hob_data << 8) | tf->data, io_ports->data_addr);
-
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- hwif->OUTB(tf->hob_feature, io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- hwif->OUTB(tf->hob_nsect, io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- hwif->OUTB(tf->hob_lbal, io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- hwif->OUTB(tf->hob_lbam, io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- hwif->OUTB(tf->hob_lbah, io_ports->lbah_addr);
-
- if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
- hwif->OUTB(tf->feature, io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
- hwif->OUTB(tf->nsect, io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
- hwif->OUTB(tf->lbal, io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
- hwif->OUTB(tf->lbam, io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
- hwif->OUTB(tf->lbah, io_ports->lbah_addr);
-
- if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- hwif->OUTB((tf->device & HIHI) | drive->select.all,
- io_ports->device_addr);
}

int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf)
@@ -149,8 +107,10 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
if (task->tf_flags & IDE_TFLAG_FLAGGED)
task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS;

- if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0)
- ide_tf_load(drive, task);
+ if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
+ ide_tf_dump(drive->name, tf);
+ hwif->tf_load(drive, task);
+ }

switch (task->data_phase) {
case TASKFILE_MULTI_OUT:
@@ -283,7 +243,8 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
return stat;
}

-static void ide_pio_sector(ide_drive_t *drive, unsigned int write)
+static void ide_pio_sector(ide_drive_t *drive, struct request *rq,
+ unsigned int write)
{
ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;
@@ -323,9 +284,9 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write)

/* do the actual data transfer */
if (write)
- hwif->ata_output_data(drive, buf, SECTOR_WORDS);
+ hwif->output_data(drive, rq, buf, SECTOR_SIZE);
else
- hwif->ata_input_data(drive, buf, SECTOR_WORDS);
+ hwif->input_data(drive, rq, buf, SECTOR_SIZE);

kunmap_atomic(buf, KM_BIO_SRC_IRQ);
#ifdef CONFIG_HIGHMEM
@@ -333,13 +294,14 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write)
#endif
}

-static void ide_pio_multi(ide_drive_t *drive, unsigned int write)
+static void ide_pio_multi(ide_drive_t *drive, struct request *rq,
+ unsigned int write)
{
unsigned int nsect;

nsect = min_t(unsigned int, drive->hwif->nleft, drive->mult_count);
while (nsect--)
- ide_pio_sector(drive, write);
+ ide_pio_sector(drive, rq, write);
}

static void ide_pio_datablock(ide_drive_t *drive, struct request *rq,
@@ -362,10 +324,10 @@ static void ide_pio_datablock(ide_drive_t *drive, struct request *rq,
switch (drive->hwif->data_phase) {
case TASKFILE_MULTI_IN:
case TASKFILE_MULTI_OUT:
- ide_pio_multi(drive, write);
+ ide_pio_multi(drive, rq, write);
break;
default:
- ide_pio_sector(drive, write);
+ ide_pio_sector(drive, rq, write);
break;
}

diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 56cdaa0..83555ca 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -44,6 +44,28 @@
int falconide_intr_lock;
EXPORT_SYMBOL(falconide_intr_lock);

+static void falconide_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+ if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
+ return insw(data_addr, buf, (len + 1) / 2);
+
+ insw_swapw(data_addr, buf, (len + 1) / 2);
+}
+
+static void falconide_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+ if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
+ return outsw(data_adr, buf, (len + 1) / 2);
+
+ outsw_swapw(data_addr, buf, (len + 1) / 2);
+}
+
static void __init falconide_setup_ports(hw_regs_t *hw)
{
int i;
@@ -90,6 +112,10 @@ static int __init falconide_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);

+ /* Atari has a byte-swapped IDE interface */
+ hwif->input_data = falconide_input_data;
+ hwif->output_data = falconide_output_data;
+
ide_get_lock(NULL, NULL);
ide_device_add(idx, NULL);
ide_release_lock();
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index 8279dc7..d3bc3f2 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -101,8 +101,10 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)

ide_init_port_hw(hwif, &hw);

- if (mmio)
+ if (mmio) {
+ hwif->host_flags = IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
+ }

idx[0] = hwif->index;

diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index f921045..6f535d0 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -72,7 +72,27 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
hw->ack_intr = ack_intr;
}

+static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+ if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
+ return insw(data_addr, buf, (len + 1) / 2);

+ insw_swapw(data_addr, buf, (len + 1) / 2);
+}
+
+static void q40ide_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+ if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
+ return outsw(data_addr, buf, (len + 1) / 2);
+
+ outsw_swapw(data_addr, buf, (len + 1) / 2);
+}

/*
* the static array is needed to have the name reported in /proc/ioports,
@@ -123,6 +143,10 @@ static int __init q40ide_init(void)
ide_init_port_data(hwif, hwif->index);
ide_init_port_hw(hwif, &hw);

+ /* Q40 has a byte-swapped IDE interface */
+ hwif->input_data = q40ide_input_data;
+ hwif->output_data = q40ide_output_data;
+
idx[i] = hwif->index;
}
}
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index e0cf5e2..1a6c27b 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -48,8 +48,6 @@

static _auide_hwif auide_hwif;

-static int auide_ddma_init(_auide_hwif *auide);
-
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)

void auide_insw(unsigned long port, void *addr, u32 count)
@@ -88,6 +86,17 @@ void auide_outsw(unsigned long port, void *addr, u32 count)
ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
}

+static void au1xxx_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ auide_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
+}
+
+static void au1xxx_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ auide_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
+}
#endif

static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -598,8 +607,8 @@ static int au_ide_probe(struct device *dev)
*/

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
- hwif->INSW = auide_insw;
- hwif->OUTSW = auide_outsw;
+ hwif->input_data = au1xxx_input_data;
+ hwif->output_data = au1xxx_output_data;
#endif
hwif->select_data = 0; /* no chipset-specific code */
hwif->config_data = 0; /* no chipset-specific code */
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index 6894762..712d17b 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -109,6 +109,7 @@ static int __devinit swarm_ide_probe(struct device *dev)
base = ioremap(offset, size);

/* Setup MMIO ops. */
+ hwif->host_flags = IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);

hwif->chipset = ide_generic;
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index c13e299..fec4955 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -63,6 +63,48 @@ static u8 superio_ide_inb (unsigned long port)
return inb(port);
}

+static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+ struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+
+ if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+ u16 data = inw(io_ports->data_addr);
+
+ tf->data = data & 0xff;
+ tf->hob_data = (data >> 8) & 0xff;
+ }
+
+ /* be sure we're looking at the low order bits */
+ outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+ tf->nsect = inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+ tf->lbal = inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+ tf->lbam = inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+ tf->lbah = inb(io_ports->lbah_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+ tf->device = superio_ide_inb(io_ports->device_addr);
+
+ if (task->tf_flags & IDE_TFLAG_LBA48) {
+ outb(drive->ctl | 0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+ tf->hob_feature = inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+ tf->hob_nsect = inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+ tf->hob_lbal = inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+ tf->hob_lbam = inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+ tf->hob_lbah = inb(io_ports->lbah_addr);
+ }
+}
+
static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
@@ -80,6 +122,8 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
tmp = superio_ide_inb(superio_ide_dma_status[port]);
outb(tmp | 0x66, superio_ide_dma_status[port]);

+ hwif->tf_read = superio_tf_read;
+
/* We need to override inb to workaround a SuperIO errata */
hwif->INB = superio_ide_inb;
}
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index ec9bd7b..070df8a 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -83,8 +83,8 @@ static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
{
u8 value;

- outb(index, hwif->dma_vendor1);
- value = inb(hwif->dma_vendor3);
+ outb(index, hwif->dma_base + 1);
+ value = inb(hwif->dma_base + 3);

DBG("index[%02X] value[%02X]\n", index, value);
return value;
@@ -97,8 +97,8 @@ static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
*/
static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
{
- outb(index, hwif->dma_vendor1);
- outb(value, hwif->dma_vendor3);
+ outb(index, hwif->dma_base + 1);
+ outb(value, hwif->dma_base + 3);
DBG("index[%02X] value[%02X]\n", index, value);
}

diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 21c5dd2..f04738d 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -250,6 +250,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
+ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
{ 0, }
};
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index ad7cdf9..910fb00 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -126,12 +126,6 @@ static u8 scc_ide_inb(unsigned long port)
return (u8)data;
}

-static u16 scc_ide_inw(unsigned long port)
-{
- u32 data = in_be32((void*)port);
- return (u16)data;
-}
-
static void scc_ide_insw(unsigned long port, void *addr, u32 count)
{
u16 *ptr = (u16 *)addr;
@@ -154,11 +148,6 @@ static void scc_ide_outb(u8 addr, unsigned long port)
out_be32((void*)port, addr);
}

-static void scc_ide_outw(u16 addr, unsigned long port)
-{
- out_be32((void*)port, addr);
-}
-
static void
scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
{
@@ -271,6 +260,20 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
out_be32((void __iomem *)udenvt_port, reg);
}

+static void scc_dma_host_set(ide_drive_t *drive, int on)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 unit = (drive->select.b.unit & 0x01);
+ u8 dma_stat = scc_ide_inb(hwif->dma_status);
+
+ if (on)
+ dma_stat |= (1 << (5 + unit));
+ else
+ dma_stat &= ~(1 << (5 + unit));
+
+ scc_ide_outb(dma_stat, hwif->dma_status);
+}
+
/**
* scc_ide_dma_setup - begin a DMA phase
* @drive: target device
@@ -301,7 +304,7 @@ static int scc_dma_setup(ide_drive_t *drive)
}

/* PRD table */
- out_be32((void __iomem *)hwif->dma_prdtable, hwif->dmatable_dma);
+ out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);

/* specify r/w */
out_be32((void __iomem *)hwif->dma_command, reading);
@@ -315,13 +318,45 @@ static int scc_dma_setup(ide_drive_t *drive)
return 0;
}

+static void scc_dma_start(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_cmd = scc_ide_inb(hwif->dma_command);
+
+ /* start DMA */
+ scc_ide_outb(dma_cmd | 1, hwif->dma_command);
+ hwif->dma = 1;
+ wmb();
+}
+
+static int __scc_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_stat, dma_cmd;
+
+ drive->waiting_for_dma = 0;
+ /* get DMA command mode */
+ dma_cmd = scc_ide_inb(hwif->dma_command);
+ /* stop DMA */
+ scc_ide_outb(dma_cmd & ~1, hwif->dma_command);
+ /* get DMA status */
+ dma_stat = scc_ide_inb(hwif->dma_status);
+ /* clear the INTR & ERROR bits */
+ scc_ide_outb(dma_stat | 6, hwif->dma_status);
+ /* purge DMA mappings */
+ ide_destroy_dmatable(drive);
+ /* verify good DMA status */
+ hwif->dma = 0;
+ wmb();
+ return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
+}

/**
* scc_dma_end - Stop DMA
* @drive: IDE drive
*
* Check and clear INT Status register.
- * Then call __ide_dma_end().
+ * Then call __scc_dma_end().
*/

static int scc_dma_end(ide_drive_t *drive)
@@ -425,7 +460,7 @@ static int scc_dma_end(ide_drive_t *drive)
break;
}

- dma_stat = __ide_dma_end(drive);
+ dma_stat = __scc_dma_end(drive);
if (data_loss)
dma_stat |= 2; /* emulate DMA error (to retry command) */
return dma_stat;
@@ -618,6 +653,122 @@ static int __devinit init_setup_scc(struct pci_dev *dev,
return rc;
}

+static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+ struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+ u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+ if (task->tf_flags & IDE_TFLAG_FLAGGED)
+ HIHI = 0xFF;
+
+ ide_set_irq(drive, 1);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DATA)
+ out_be32((void *)io_ports->data_addr,
+ (tf->hob_data << 8) | tf->data);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+ scc_ide_outb(tf->hob_feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+ scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+ scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+ scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+ scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+ scc_ide_outb(tf->feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+ scc_ide_outb(tf->nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+ scc_ide_outb(tf->lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+ scc_ide_outb(tf->lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+ scc_ide_outb(tf->lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+ scc_ide_outb((tf->device & HIHI) | drive->select.all,
+ io_ports->device_addr);
+}
+
+static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+ struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+
+ if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+ u16 data = (u16)in_be32((void *)io_ports->data_addr);
+
+ tf->data = data & 0xff;
+ tf->hob_data = (data >> 8) & 0xff;
+ }
+
+ /* be sure we're looking at the low order bits */
+ scc_ide_outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+ tf->nsect = scc_ide_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+ tf->lbal = scc_ide_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+ tf->lbam = scc_ide_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+ tf->lbah = scc_ide_inb(io_ports->lbah_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+ tf->device = scc_ide_inb(io_ports->device_addr);
+
+ if (task->tf_flags & IDE_TFLAG_LBA48) {
+ scc_ide_outb(drive->ctl | 0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+ tf->hob_feature = scc_ide_inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+ tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+ tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+ tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+ tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr);
+ }
+}
+
+static void scc_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+ len++;
+
+ if (drive->io_32bit) {
+ scc_ide_insl(data_addr, buf, len / 4);
+
+ if ((len & 3) >= 2)
+ scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
+ } else
+ scc_ide_insw(data_addr, buf, len / 2);
+}
+
+static void scc_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+ len++;
+
+ if (drive->io_32bit) {
+ scc_ide_outsl(data_addr, buf, len / 4);
+
+ if ((len & 3) >= 2)
+ scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
+ } else
+ scc_ide_outsw(data_addr, buf, len / 2);
+}
+
/**
* init_mmio_iops_scc - set up the iops for MMIO
* @hwif: interface to set up
@@ -632,15 +783,15 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)

ide_set_hwifdata(hwif, ports);

+ hwif->tf_load = scc_tf_load;
+ hwif->tf_read = scc_tf_read;
+
+ hwif->input_data = scc_input_data;
+ hwif->output_data = scc_output_data;
+
hwif->INB = scc_ide_inb;
- hwif->INW = scc_ide_inw;
- hwif->INSW = scc_ide_insw;
- hwif->INSL = scc_ide_insl;
hwif->OUTB = scc_ide_outb;
hwif->OUTBSYNC = scc_ide_outbsync;
- hwif->OUTW = scc_ide_outw;
- hwif->OUTSW = scc_ide_outsw;
- hwif->OUTSL = scc_ide_outsl;

hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
@@ -687,7 +838,6 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)

hwif->dma_command = hwif->dma_base;
hwif->dma_status = hwif->dma_base + 0x04;
- hwif->dma_prdtable = hwif->dma_base + 0x08;

/* PTERADD */
out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
@@ -706,10 +856,10 @@ static const struct ide_port_ops scc_port_ops = {
};

static const struct ide_dma_ops scc_dma_ops = {
- .dma_host_set = ide_dma_host_set,
+ .dma_host_set = scc_dma_host_set,
.dma_setup = scc_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
+ .dma_start = scc_dma_start,
.dma_end = scc_dma_end,
.dma_test_irq = scc_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 63e28f4..16a0bce 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -573,6 +573,7 @@ static const struct ide_port_info sgiioc4_port_info __devinitdata = {
.init_dma = ide_dma_sgiioc4,
.port_ops = &sgiioc4_port_ops,
.dma_ops = &sgiioc4_dma_ops,
+ .host_flags = IDE_HFLAG_MMIO,
.mwdma_mask = ATA_MWDMA2_ONLY,
};

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index c2040a0..4cf8fc5 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,8 +1,8 @@
/*
* Copyright (C) 2001-2002 Andre Hedrick
* Copyright (C) 2003 Red Hat
- * Copyright (C) 2007 MontaVista Software, Inc.
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2007-2008 MontaVista Software, Inc.
+ * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
@@ -17,10 +17,10 @@
*
* FAQ Items:
* If you are using Marvell SATA-IDE adapters with Maxtor drives
- * ensure the system is set up for ATA100/UDMA5 not UDMA6.
+ * ensure the system is set up for ATA100/UDMA5, not UDMA6.
*
* If you are using WD drives with SATA bridges you must set the
- * drive to "Single". "Master" will hang
+ * drive to "Single". "Master" will hang.
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
@@ -42,25 +42,24 @@
#include
#include
#include
-
-#include
+#include

/**
* pdev_is_sata - check if device is SATA
* @pdev: PCI device to check
- *
+ *
* Returns true if this is a SATA controller
*/
-
+
static int pdev_is_sata(struct pci_dev *pdev)
{
#ifdef CONFIG_BLK_DEV_IDE_SATA
- switch(pdev->device) {
- case PCI_DEVICE_ID_SII_3112:
- case PCI_DEVICE_ID_SII_1210SA:
- return 1;
- case PCI_DEVICE_ID_SII_680:
- return 0;
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_SII_3112:
+ case PCI_DEVICE_ID_SII_1210SA:
+ return 1;
+ case PCI_DEVICE_ID_SII_680:
+ return 0;
}
BUG();
#endif
@@ -70,10 +69,10 @@ static int pdev_is_sata(struct pci_dev *pdev)
/**
* is_sata - check if hwif is SATA
* @hwif: interface to check
- *
+ *
* Returns true if this is a SATA controller
*/
-
+
static inline int is_sata(ide_hwif_t *hwif)
{
return pdev_is_sata(to_pci_dev(hwif->dev));
@@ -86,21 +85,22 @@ static inline int is_sata(ide_hwif_t *hwif)
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
- * Thankfully this is a configuration operation so isnt performance
- * criticial.
+ * Thankfully this is a configuration operation, so isn't performance
+ * critical.
*/
-
+
static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
{
unsigned long base = (unsigned long)hwif->hwif_data;
+
base += 0xA0 + r;
- if(hwif->mmio)
- base += (hwif->channel << 6);
+ if (hwif->mmio)
+ base += hwif->channel << 6;
else
- base += (hwif->channel << 4);
+ base += hwif->channel << 4;
return base;
}
-
+
/**
* siimage_seldev - return register base
* @hwif: interface
@@ -110,20 +110,69 @@ static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
* PCI space or MMIO space to access the control register in question
* including accounting for the unit shift.
*/
-
+
static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned long base = (unsigned long)hwif->hwif_data;
+ unsigned long base = (unsigned long)hwif->hwif_data;
+
base += 0xA0 + r;
- if(hwif->mmio)
- base += (hwif->channel << 6);
+ if (hwif->mmio)
+ base += hwif->channel << 6;
else
- base += (hwif->channel << 4);
+ base += hwif->channel << 4;
base |= drive->select.b.unit << drive->select.b.unit;
return base;
}

+static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
+{
+ u8 tmp = 0;
+
+ if (pci_get_drvdata(dev))
+ tmp = readb((void __iomem *)addr);
+ else
+ pci_read_config_byte(dev, addr, &tmp);
+
+ return tmp;
+}
+
+static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
+{
+ u16 tmp = 0;
+
+ if (pci_get_drvdata(dev))
+ tmp = readw((void __iomem *)addr);
+ else
+ pci_read_config_word(dev, addr, &tmp);
+
+ return tmp;
+}
+
+static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
+{
+ if (pci_get_drvdata(dev))
+ writeb(val, (void __iomem *)addr);
+ else
+ pci_write_config_byte(dev, addr, val);
+}
+
+static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
+{
+ if (pci_get_drvdata(dev))
+ writew(val, (void __iomem *)addr);
+ else
+ pci_write_config_word(dev, addr, val);
+}
+
+static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
+{
+ if (pci_get_drvdata(dev))
+ writel(val, (void __iomem *)addr);
+ else
+ pci_write_config_dword(dev, addr, val);
+}
+
/**
* sil_udma_filter - compute UDMA mask
* @drive: IDE device
@@ -136,24 +185,26 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)

static u8 sil_pata_udma_filter(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = (unsigned long) hwif->hwif_data;
- u8 mask = 0, scsc = 0;
+ ide_hwif_t *hwif = drive->hwif;
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u8 scsc, mask = 0;

- if (hwif->mmio)
- scsc = hwif->INB(base + 0x4A);
- else
- pci_read_config_byte(dev, 0x8A, &scsc);
+ scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));

- if ((scsc & 0x30) == 0x10) /* 133 */
+ switch (scsc & 0x30) {
+ case 0x10: /* 133 */
mask = ATA_UDMA6;
- else if ((scsc & 0x30) == 0x20) /* 2xPCI */
+ break;
+ case 0x20: /* 2xPCI */
mask = ATA_UDMA6;
- else if ((scsc & 0x30) == 0x00) /* 100 */
+ break;
+ case 0x00: /* 100 */
mask = ATA_UDMA5;
- else /* Disabled ? */
+ break;
+ default: /* Disabled ? */
BUG();
+ }

return mask;
}
@@ -175,15 +226,16 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive)

static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
{
- const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
- const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
+ static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
+ static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };

ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
ide_drive_t *pair = ide_get_paired_drive(drive);
u32 speedt = 0;
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
- unsigned long tfaddr = siimage_selreg(hwif, 0x02);
+ unsigned long tfaddr = siimage_selreg(hwif, 0x02);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 tf_pio = pio;
u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84)
@@ -203,36 +255,20 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
speedp = data_speed[pio];
speedt = tf_speed[tf_pio];

- if (hwif->mmio) {
- hwif->OUTW(speedp, addr);
- hwif->OUTW(speedt, tfaddr);
- /* Now set up IORDY */
- if (pio > 2)
- hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
- else
- hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
-
- mode = hwif->INB(base + addr_mask);
- mode &= ~(unit ? 0x30 : 0x03);
- mode |= (unit ? 0x10 : 0x01);
- hwif->OUTB(mode, base + addr_mask);
- } else {
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- pci_write_config_word(dev, addr, speedp);
- pci_write_config_word(dev, tfaddr, speedt);
- pci_read_config_word(dev, tfaddr - 2, &speedp);
- speedp &= ~0x200;
- /* Set IORDY for mode 3 or 4 */
- if (pio > 2)
- speedp |= 0x200;
- pci_write_config_word(dev, tfaddr - 2, speedp);
-
- pci_read_config_byte(dev, addr_mask, &mode);
- mode &= ~(unit ? 0x30 : 0x03);
- mode |= (unit ? 0x10 : 0x01);
- pci_write_config_byte(dev, addr_mask, mode);
- }
+ sil_iowrite16(dev, speedp, addr);
+ sil_iowrite16(dev, speedt, tfaddr);
+
+ /* now set up IORDY */
+ speedp = sil_ioread16(dev, tfaddr - 2);
+ speedp &= ~0x200;
+ if (pio > 2)
+ speedp |= 0x200;
+ sil_iowrite16(dev, speedp, tfaddr - 2);
+
+ mode = sil_ioread8(dev, base + addr_mask);
+ mode &= ~(unit ? 0x30 : 0x03);
+ mode |= unit ? 0x10 : 0x01;
+ sil_iowrite8(dev, mode, base + addr_mask);
}

/**
@@ -245,59 +281,45 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)

static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
- u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
- u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
- u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
+ static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
+ static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
+ static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };

ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
- u8 scsc = 0, addr_mask = ((hwif->channel) ?
- ((hwif->mmio) ? 0xF4 : 0x84) :
- ((hwif->mmio) ? 0xB4 : 0x80));
-
+ u8 scsc = 0, addr_mask = hwif->channel ?
+ (hwif->mmio ? 0xF4 : 0x84) :
+ (hwif->mmio ? 0xB4 : 0x80);
unsigned long ma = siimage_seldev(drive, 0x08);
unsigned long ua = siimage_seldev(drive, 0x0C);

- if (hwif->mmio) {
- scsc = hwif->INB(base + 0x4A);
- mode = hwif->INB(base + addr_mask);
- multi = hwif->INW(ma);
- ultra = hwif->INW(ua);
- } else {
- pci_read_config_byte(dev, 0x8A, &scsc);
- pci_read_config_byte(dev, addr_mask, &mode);
- pci_read_config_word(dev, ma, &multi);
- pci_read_config_word(dev, ua, &ultra);
- }
+ scsc = sil_ioread8 (dev, base + (hwif->mmio ? 0x4A : 0x8A));
+ mode = sil_ioread8 (dev, base + addr_mask);
+ multi = sil_ioread16(dev, ma);
+ ultra = sil_ioread16(dev, ua);

- mode &= ~((unit) ? 0x30 : 0x03);
+ mode &= ~(unit ? 0x30 : 0x03);
ultra &= ~0x3F;
scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;

scsc = is_sata(hwif) ? 1 : scsc;

if (speed >= XFER_UDMA_0) {
- multi = dma[2];
- ultra |= (scsc ? ultra6[speed - XFER_UDMA_0] :
- ultra5[speed - XFER_UDMA_0]);
- mode |= (unit ? 0x30 : 0x03);
+ multi = dma[2];
+ ultra |= scsc ? ultra6[speed - XFER_UDMA_0] :
+ ultra5[speed - XFER_UDMA_0];
+ mode |= unit ? 0x30 : 0x03;
} else {
multi = dma[speed - XFER_MW_DMA_0];
- mode |= (unit ? 0x20 : 0x02);
+ mode |= unit ? 0x20 : 0x02;
}

- if (hwif->mmio) {
- hwif->OUTB(mode, base + addr_mask);
- hwif->OUTW(multi, ma);
- hwif->OUTW(ultra, ua);
- } else {
- pci_write_config_byte(dev, addr_mask, mode);
- pci_write_config_word(dev, ma, multi);
- pci_write_config_word(dev, ua, ultra);
- }
+ sil_iowrite8 (dev, mode, base + addr_mask);
+ sil_iowrite16(dev, multi, ma);
+ sil_iowrite16(dev, ultra, ua);
}

/* returns 1 if dma irq issued, 0 otherwise */
@@ -309,13 +331,14 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive)
unsigned long addr = siimage_selreg(hwif, 1);

/* return 1 if INTR asserted */
- if ((hwif->INB(hwif->dma_status) & 4) == 4)
+ if (hwif->INB(hwif->dma_status) & 4)
return 1;

/* return 1 if Device INTR asserted */
pci_read_config_byte(dev, addr, &dma_altstat);
if (dma_altstat & 8)
- return 0; //return 1;
+ return 0; /* return 1; */
+
return 0;
}

@@ -335,9 +358,9 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
= (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];

if (sata_error_addr) {
- unsigned long base = (unsigned long)hwif->hwif_data;
- u32 ext_stat = readl((void __iomem *)(base + 0x10));
- u8 watchdog = 0;
+ unsigned long base = (unsigned long)hwif->hwif_data;
+ u32 ext_stat = readl((void __iomem *)(base + 0x10));
+ u8 watchdog = 0;

if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
u32 sata_error = readl(sata_error_addr);
@@ -346,25 +369,22 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
watchdog = (sata_error & 0x00680000) ? 1 : 0;
printk(KERN_WARNING "%s: sata_error = 0x%08x, "
"watchdog = %d, %s\n",
- drive->name, sata_error, watchdog,
- __func__);
-
- } else {
+ drive->name, sata_error, watchdog, __func__);
+ } else
watchdog = (ext_stat & 0x8000) ? 1 : 0;
- }
- ext_stat >>= 16;

+ ext_stat >>= 16;
if (!(ext_stat & 0x0404) && !watchdog)
return 0;
}

/* return 1 if INTR asserted */
- if ((readb((void __iomem *)hwif->dma_status) & 0x04) == 0x04)
+ if (readb((void __iomem *)hwif->dma_status) & 0x04)
return 1;

/* return 1 if Device INTR asserted */
- if ((readb((void __iomem *)addr) & 8) == 8)
- return 0; //return 1;
+ if (readb((void __iomem *)addr) & 8)
+ return 0; /* return 1; */

return 0;
}
@@ -423,63 +443,33 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
}

/**
- * proc_reports_siimage - add siimage controller to proc
- * @dev: PCI device
- * @clocking: SCSC value
- * @name: controller name
- *
- * Report the clocking mode of the controller and add it to
- * the /proc interface layer
- */
-
-static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char *name)
-{
- if (!pdev_is_sata(dev)) {
- printk(KERN_INFO "%s: BASE CLOCK ", name);
- clocking &= 0x03;
- switch (clocking) {
- case 0x03: printk("DISABLED!\n"); break;
- case 0x02: printk("== 2X PCI\n"); break;
- case 0x01: printk("== 133\n"); break;
- case 0x00: printk("== 100\n"); break;
- }
- }
-}
-
-/**
- * setup_mmio_siimage - switch an SI controller into MMIO
+ * setup_mmio_siimage - switch controller into MMIO mode
* @dev: PCI device we are configuring
* @name: device name
*
- * Attempt to put the device into mmio mode. There are some slight
- * complications here with certain systems where the mmio bar isnt
- * mapped so we have to be sure we can fall back to I/O.
+ * Attempt to put the device into MMIO mode. There are some slight
+ * complications here with certain systems where the MMIO BAR isn't
+ * mapped, so we have to be sure that we can fall back to I/O.
*/
-
-static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
+
+static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name)
{
resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
- u8 tmpbyte = 0;
void __iomem *ioaddr;
- u32 tmp, irq_mask;

/*
- * Drop back to PIO if we can't map the mmio. Some
- * systems seem to get terminally confused in the PCI
- * spaces.
+ * Drop back to PIO if we can't map the MMIO. Some systems
+ * seem to get terminally confused in the PCI spaces.
*/
-
- if(!request_mem_region(bar5, barsize, name))
- {
- printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n");
+ if (!request_mem_region(bar5, barsize, name)) {
+ printk(KERN_WARNING "siimage: IDE controller MMIO ports not "
+ "available.\n");
return 0;
}
-
- ioaddr = ioremap(bar5, barsize);

- if (ioaddr == NULL)
- {
+ ioaddr = ioremap(bar5, barsize);
+ if (ioaddr == NULL) {
release_mem_region(bar5, barsize);
return 0;
}
@@ -487,62 +477,6 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
pci_set_master(dev);
pci_set_drvdata(dev, (void *) ioaddr);

- if (pdev_is_sata(dev)) {
- /* make sure IDE0/1 interrupts are not masked */
- irq_mask = (1 << 22) | (1 << 23);
- tmp = readl(ioaddr + 0x48);
- if (tmp & irq_mask) {
- tmp &= ~irq_mask;
- writel(tmp, ioaddr + 0x48);
- readl(ioaddr + 0x48); /* flush */
- }
- writel(0, ioaddr + 0x148);
- writel(0, ioaddr + 0x1C8);
- }
-
- writeb(0, ioaddr + 0xB4);
- writeb(0, ioaddr + 0xF4);
- tmpbyte = readb(ioaddr + 0x4A);
-
- switch(tmpbyte & 0x30) {
- case 0x00:
- /* In 100 MHz clocking, try and switch to 133 */
- writeb(tmpbyte|0x10, ioaddr + 0x4A);
- break;
- case 0x10:
- /* On 133Mhz clocking */
- break;
- case 0x20:
- /* On PCIx2 clocking */
- break;
- case 0x30:
- /* Clocking is disabled */
- /* 133 clock attempt to force it on */
- writeb(tmpbyte & ~0x20, ioaddr + 0x4A);
- break;
- }
-
- writeb( 0x72, ioaddr + 0xA1);
- writew( 0x328A, ioaddr + 0xA2);
- writel(0x62DD62DD, ioaddr + 0xA4);
- writel(0x43924392, ioaddr + 0xA8);
- writel(0x40094009, ioaddr + 0xAC);
- writeb( 0x72, ioaddr + 0xE1);
- writew( 0x328A, ioaddr + 0xE2);
- writel(0x62DD62DD, ioaddr + 0xE4);
- writel(0x43924392, ioaddr + 0xE8);
- writel(0x40094009, ioaddr + 0xEC);
-
- if (pdev_is_sata(dev)) {
- writel(0xFFFF0000, ioaddr + 0x108);
- writel(0xFFFF0000, ioaddr + 0x188);
- writel(0x00680000, ioaddr + 0x148);
- writel(0x00680000, ioaddr + 0x1C8);
- }
-
- tmpbyte = readb(ioaddr + 0x4A);
-
- proc_reports_siimage(dev, (tmpbyte>>4), name);
return 1;
}

@@ -552,55 +486,92 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
* @name: device name
*
* Perform the initial PCI set up for this device. Attempt to switch
- * to 133MHz clocking if the system isn't already set up to do it.
+ * to 133 MHz clocking if the system isn't already set up to do it.
*/

-static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
+ const char *name)
{
- u8 rev = dev->revision, tmpbyte = 0, BA5_EN = 0;
+ unsigned long base, scsc_addr;
+ void __iomem *ioaddr = NULL;
+ u8 rev = dev->revision, tmp, BA5_EN;

pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);

pci_read_config_byte(dev, 0x8A, &BA5_EN);
- if ((BA5_EN & 0x01) || (pci_resource_start(dev, 5))) {
- if (setup_mmio_siimage(dev, name)) {
- return 0;
+
+ if ((BA5_EN & 0x01) || pci_resource_start(dev, 5))
+ if (setup_mmio_siimage(dev, name))
+ ioaddr = pci_get_drvdata(dev);
+
+ base = (unsigned long)ioaddr;
+
+ if (ioaddr && pdev_is_sata(dev)) {
+ u32 tmp32, irq_mask;
+
+ /* make sure IDE0/1 interrupts are not masked */
+ irq_mask = (1 << 22) | (1 << 23);
+ tmp32 = readl(ioaddr + 0x48);
+ if (tmp32 & irq_mask) {
+ tmp32 &= ~irq_mask;
+ writel(tmp32, ioaddr + 0x48);
+ readl(ioaddr + 0x48); /* flush */
}
+ writel(0, ioaddr + 0x148);
+ writel(0, ioaddr + 0x1C8);
+ }
+
+ sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
+ sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
+
+ scsc_addr = base ? (base + 0x4A) : 0x8A;
+ tmp = sil_ioread8(dev, scsc_addr);
+
+ switch (tmp & 0x30) {
+ case 0x00:
+ /* On 100 MHz clocking, try and switch to 133 MHz */
+ sil_iowrite8(dev, tmp | 0x10, scsc_addr);
+ break;
+ case 0x30:
+ /* Clocking is disabled, attempt to force 133MHz clocking. */
+ sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
+ case 0x10:
+ /* On 133Mhz clocking. */
+ break;
+ case 0x20:
+ /* On PCIx2 clocking. */
+ break;
}

- pci_write_config_byte(dev, 0x80, 0x00);
- pci_write_config_byte(dev, 0x84, 0x00);
- pci_read_config_byte(dev, 0x8A, &tmpbyte);
- switch(tmpbyte & 0x30) {
- case 0x00:
- /* 133 clock attempt to force it on */
- pci_write_config_byte(dev, 0x8A, tmpbyte|0x10);
- case 0x30:
- /* if clocking is disabled */
- /* 133 clock attempt to force it on */
- pci_write_config_byte(dev, 0x8A, tmpbyte & ~0x20);
- case 0x10:
- /* 133 already */
- break;
- case 0x20:
- /* BIOS set PCI x2 clocking */
- break;
+ tmp = sil_ioread8(dev, scsc_addr);
+
+ sil_iowrite8 (dev, 0x72, base + 0xA1);
+ sil_iowrite16(dev, 0x328A, base + 0xA2);
+ sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
+ sil_iowrite32(dev, 0x43924392, base + 0xA8);
+ sil_iowrite32(dev, 0x40094009, base + 0xAC);
+ sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1);
+ sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2);
+ sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
+ sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
+ sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
+
+ if (base && pdev_is_sata(dev)) {
+ writel(0xFFFF0000, ioaddr + 0x108);
+ writel(0xFFFF0000, ioaddr + 0x188);
+ writel(0x00680000, ioaddr + 0x148);
+ writel(0x00680000, ioaddr + 0x1C8);
}

- pci_read_config_byte(dev, 0x8A, &tmpbyte);
+ /* report the clocking mode of the controller */
+ if (!pdev_is_sata(dev)) {
+ static const char *clk_str[] =
+ { "== 100", "== 133", "== 2X PCI", "DISABLED!" };

- pci_write_config_byte(dev, 0xA1, 0x72);
- pci_write_config_word(dev, 0xA2, 0x328A);
- pci_write_config_dword(dev, 0xA4, 0x62DD62DD);
- pci_write_config_dword(dev, 0xA8, 0x43924392);
- pci_write_config_dword(dev, 0xAC, 0x40094009);
- pci_write_config_byte(dev, 0xB1, 0x72);
- pci_write_config_word(dev, 0xB2, 0x328A);
- pci_write_config_dword(dev, 0xB4, 0x62DD62DD);
- pci_write_config_dword(dev, 0xB8, 0x43924392);
- pci_write_config_dword(dev, 0xBC, 0x40094009);
+ tmp >>= 4;
+ printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]);
+ }

- proc_reports_siimage(dev, (tmpbyte>>4), name);
return 0;
}

@@ -610,8 +581,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
*
* The basic setup here is fairly simple, we can use standard MMIO
* operations. However we do have to set the taskfile register offsets
- * by hand as there isnt a standard defined layout for them this
- * time.
+ * by hand as there isn't a standard defined layout for them this time.
*
* The hardware supports buffered taskfiles and also some rather nice
* extended PRD tables. For better SI3112 support use the libata driver
@@ -622,23 +592,20 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
struct pci_dev *dev = to_pci_dev(hwif->dev);
void *addr = pci_get_drvdata(dev);
u8 ch = hwif->channel;
- unsigned long base;
-
struct ide_io_ports *io_ports = &hwif->io_ports;
+ unsigned long base;

/*
- * Fill in the basic HWIF bits
+ * Fill in the basic hwif bits
*/
-
+ hwif->host_flags |= IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
- hwif->hwif_data = addr;
+ hwif->hwif_data = addr;

/*
- * Now set up the hw. We have to do this ourselves as
- * the MMIO layout isnt the same as the standard port
- * based I/O
+ * Now set up the hw. We have to do this ourselves as the
+ * MMIO layout isn't the same as the standard port based I/O.
*/
-
memset(io_ports, 0, sizeof(*io_ports));

base = (unsigned long)addr;
@@ -648,10 +615,9 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
base += 0x80;

/*
- * The buffered task file doesn't have status/control
- * so we can't currently use it sanely since we want to
- * use LBA48 mode.
- */
+ * The buffered task file doesn't have status/control, so we
+ * can't currently use it sanely since we want to use LBA48 mode.
+ */
io_ports->data_addr = base;
io_ports->error_addr = base + 1;
io_ports->nsect_addr = base + 2;
@@ -680,19 +646,17 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)

static int is_dev_seagate_sata(ide_drive_t *drive)
{
- const char *s = &drive->id->model[0];
- unsigned len;
-
- len = strnlen(s, sizeof(drive->id->model));
+ const char *s = &drive->id->model[0];
+ unsigned len = strnlen(s, sizeof(drive->id->model));

- if ((len > 4) && (!memcmp(s, "ST", 2))) {
+ if ((len > 4) && (!memcmp(s, "ST", 2)))
if ((!memcmp(s + len - 2, "AS", 2)) ||
(!memcmp(s + len - 3, "ASL", 3))) {
printk(KERN_INFO "%s: applying pessimistic Seagate "
"errata fix\n", drive->name);
return 1;
}
- }
+
return 0;
}

@@ -709,7 +673,7 @@ static void __devinit sil_quirkproc(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;

- /* Try and raise the rqsize */
+ /* Try and rise the rqsize */
if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
hwif->rqsize = 128;
}
@@ -743,20 +707,14 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
* sil_cable_detect - cable detection
* @hwif: interface to check
*
- * Check for the presence of an ATA66 capable cable on the
- * interface.
+ * Check for the presence of an ATA66 capable cable on the interface.
*/

static u8 __devinit sil_cable_detect(ide_hwif_t *hwif)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long addr = siimage_selreg(hwif, 0);
- u8 ata66 = 0;
-
- if (pci_get_drvdata(dev) == NULL)
- pci_read_config_byte(dev, addr, &ata66);
- else
- ata66 = hwif->INB(addr);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long addr = siimage_selreg(hwif, 0);
+ u8 ata66 = sil_ioread8(dev, addr);

return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
}
@@ -802,15 +760,16 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = {
};

/**
- * siimage_init_one - pci layer discovery entry
+ * siimage_init_one - PCI layer discovery entry
* @dev: PCI device
* @id: ident table entry
*
- * Called by the PCI code when it finds an SI680 or SI3112 controller.
+ * Called by the PCI code when it finds an SiI680 or SiI3112 controller.
* We then use the IDE PCI generic helper to do most of the work.
*/
-
-static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+
+static int __devinit siimage_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct ide_port_info d;
u8 idx = id->driver_data;
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 3cac6b2..48aa019 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -941,6 +941,7 @@ static const struct ide_port_info pmac_port_info = {
.port_ops = &pmac_ide_port_ops,
.host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_MMIO |
IDE_HFLAG_UNMASK_IRQS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 8d88526..1b0eb5a 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -38,7 +38,6 @@ config PCMCIA_DEBUG
config PCMCIA
tristate "16-bit PCMCIA support"
select CRC32
- select HAVE_IDE
default y
---help---
This option enables support for 16-bit PCMCIA cards. Most older
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 3255363..44d8d51 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -134,6 +134,7 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive)
static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount)
{
+ ide_hwif_t *hwif = drive->hwif;
int count;
char *buf;

@@ -145,14 +146,12 @@ static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
local_irq_save(flags);
buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
pc->sg->offset;
- drive->hwif->atapi_input_bytes(drive,
- buf + pc->b_count, count);
+ hwif->input_data(drive, NULL, buf + pc->b_count, count);
kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
local_irq_restore(flags);
} else {
buf = sg_virt(pc->sg);
- drive->hwif->atapi_input_bytes(drive,
- buf + pc->b_count, count);
+ hwif->input_data(drive, NULL, buf + pc->b_count, count);
}
bcount -= count; pc->b_count += count;
if (pc->b_count == pc->sg->length) {
@@ -165,13 +164,14 @@ static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,

if (bcount) {
printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n");
- ide_atapi_discard_data(drive, bcount);
+ ide_pad_transfer(drive, 0, bcount);
}
}

static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount)
{
+ ide_hwif_t *hwif = drive->hwif;
int count;
char *buf;

@@ -183,14 +183,12 @@ static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
local_irq_save(flags);
buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
pc->sg->offset;
- drive->hwif->atapi_output_bytes(drive,
- buf + pc->b_count, count);
+ hwif->output_data(drive, NULL, buf + pc->b_count, count);
kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
local_irq_restore(flags);
} else {
buf = sg_virt(pc->sg);
- drive->hwif->atapi_output_bytes(drive,
- buf + pc->b_count, count);
+ hwif->output_data(drive, NULL, buf + pc->b_count, count);
}
bcount -= count; pc->b_count += count;
if (pc->b_count == pc->sg->length) {
@@ -203,7 +201,7 @@ static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,

if (bcount) {
printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n");
- ide_atapi_write_zeros(drive, bcount);
+ ide_pad_transfer(drive, 1, bcount);
}
}

@@ -258,7 +256,8 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)

if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->io_ports.command_addr);

rq->errors++;

@@ -431,14 +430,15 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
idescsi_input_buffers(drive, pc,
temp);
else
- drive->hwif->atapi_input_bytes(drive, pc->cur_pos, temp);
+ hwif->input_data(drive, NULL,
+ pc->cur_pos, temp);
printk(KERN_ERR "ide-scsi: transferred"
" %d of %d bytes\n",
temp, bcount);
}
pc->xferred += temp;
pc->cur_pos += temp;
- ide_atapi_discard_data(drive, bcount - temp);
+ ide_pad_transfer(drive, 0, bcount - temp);
ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
return ide_started;
}
@@ -452,15 +452,13 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
if (pc->sg)
idescsi_input_buffers(drive, pc, bcount);
else
- hwif->atapi_input_bytes(drive, pc->cur_pos,
- bcount);
+ hwif->input_data(drive, NULL, pc->cur_pos, bcount);
} else {
pc->flags |= PC_FLAG_WRITING;
if (pc->sg)
idescsi_output_buffers(drive, pc, bcount);
else
- hwif->atapi_output_bytes(drive, pc->cur_pos,
- bcount);
+ hwif->output_data(drive, NULL, pc->cur_pos, bcount);
}
/* Update the current position */
pc->xferred += bcount;
@@ -493,8 +491,10 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
BUG_ON(HWGROUP(drive)->handler != NULL);
/* Set the interrupt routine */
ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
+
/* Send the actual packet */
- drive->hwif->atapi_output_bytes(drive, scsi->pc->c, 12);
+ hwif->output_data(drive, NULL, scsi->pc->c, 12);
+
if (pc->flags & PC_FLAG_DMA_OK) {
pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
hwif->dma_ops->dma_start(drive);
@@ -574,7 +574,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
return ide_started;
} else {
/* Issue the packet command */
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ ide_execute_pkt_cmd(drive);
return idescsi_transfer_pc(drive);
}
}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 32fd77b..b0135b0 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -427,6 +427,8 @@ struct ide_dma_ops {
void (*dma_timeout)(struct ide_drive_s *);
};

+struct ide_task_s;
+
typedef struct hwif_s {
struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
struct hwif_s *mate; /* other hwif from same PCI chip */
@@ -467,24 +469,18 @@ typedef struct hwif_s {
const struct ide_port_ops *port_ops;
const struct ide_dma_ops *dma_ops;

- void (*ata_input_data)(ide_drive_t *, void *, u32);
- void (*ata_output_data)(ide_drive_t *, void *, u32);
+ void (*tf_load)(ide_drive_t *, struct ide_task_s *);
+ void (*tf_read)(ide_drive_t *, struct ide_task_s *);

- void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
- void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
+ void (*input_data)(ide_drive_t *, struct request *, void *, unsigned);
+ void (*output_data)(ide_drive_t *, struct request *, void *, unsigned);

void (*ide_dma_clear_irq)(ide_drive_t *drive);

void (*OUTB)(u8 addr, unsigned long port);
void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
- void (*OUTW)(u16 addr, unsigned long port);
- void (*OUTSW)(unsigned long port, void *addr, u32 count);
- void (*OUTSL)(unsigned long port, void *addr, u32 count);

u8 (*INB)(unsigned long port);
- u16 (*INW)(unsigned long port);
- void (*INSW)(unsigned long port, void *addr, u32 count);
- void (*INSL)(unsigned long port, void *addr, u32 count);

/* dma physical region descriptor table (cpu view) */
unsigned int *dmatable_cpu;
@@ -509,10 +505,7 @@ typedef struct hwif_s {

unsigned long dma_base; /* base addr for dma ports */
unsigned long dma_command; /* dma command register */
- unsigned long dma_vendor1; /* dma vendor 1 register */
unsigned long dma_status; /* dma status register */
- unsigned long dma_vendor3; /* dma vendor 3 register */
- unsigned long dma_prdtable; /* actual prd table address */

unsigned long config_data; /* for use by chipset-specific code */
unsigned long select_data; /* for use by chipset-specific code */
@@ -547,7 +540,7 @@ typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
typedef int (ide_expiry_t)(ide_drive_t *);

/* used by ide-cd, ide-floppy, etc. */
-typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
+typedef void (xfer_func_t)(ide_drive_t *, struct request *rq, void *, unsigned);

typedef struct hwgroup_s {
/* irq handler, if active */
@@ -829,6 +822,10 @@ extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigne
void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int,
ide_expiry_t *);

+void ide_execute_pkt_cmd(ide_drive_t *);
+
+void ide_pad_transfer(ide_drive_t *, int, int);
+
ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);

ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
@@ -965,8 +962,7 @@ typedef struct ide_task_s {
void *special; /* valid_t generally */
} ide_task_t;

-void ide_tf_load(ide_drive_t *, ide_task_t *);
-void ide_tf_read(ide_drive_t *, ide_task_t *);
+void ide_tf_dump(const char *, struct ide_taskfile *);

extern void SELECT_DRIVE(ide_drive_t *);
extern void SELECT_MASK(ide_drive_t *, int);
@@ -1072,6 +1068,8 @@ enum {
IDE_HFLAG_NO_DMA = (1 << 14),
/* check if host is PCI IDE device before allowing DMA */
IDE_HFLAG_NO_AUTODMA = (1 << 15),
+ /* host uses MMIO */
+ IDE_HFLAG_MMIO = (1 << 16),
/* host is CS5510/CS5520 */
IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA,
/* no LBA48 */
@@ -1360,27 +1358,4 @@ static inline u8 ide_read_error(ide_drive_t *drive)

return hwif->INB(hwif->io_ports.error_addr);
}
-
-/*
- * Too bad. The drive wants to send us data which we are not ready to accept.
- * Just throw it away.
- */
-static inline void ide_atapi_discard_data(ide_drive_t *drive, unsigned bcount)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- /* FIXME: use ->atapi_input_bytes */
- while (bcount--)
- (void)hwif->INB(hwif->io_ports.data_addr);
-}
-
-static inline void ide_atapi_write_zeros(ide_drive_t *drive, unsigned bcount)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- /* FIXME: use ->atapi_output_bytes */
- while (bcount--)
- hwif->OUTB(0, hwif->io_ports.data_addr);
-}
-
#endif /* _IDE_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/