Evgen L wrote:
> Hi all
>
> I have a problem with my Intel SR1550 server (S5000PAL motheboard,
> SATA/SAS controller, 5 SATA HDD Seagate ST9120822AS ).
> The four drivers are in two md raid1, which striping by lvm and one
> drive used separately. I have problem like below with two different
> drives (ata3 or ata4) and ata5. I look problem like this with RedHat
> 2.6.18-53 kernel, 2.6.24-rc8, and today 2.6.24-git5. I reading about any
> problems like this in lkml.org. There can be this message will help to
> fix this issue.
> The complete dmesg in attachment.
>
> md: bind
> RAID1 conf printout:
> --- wd:1 rd:2
> disk 0, wo:0, o:1, dev:sdc1
> disk 1, wo:1, o:1, dev:sdd1
> md: recovery of RAID array md2
> md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
> md: using maximum available idle IO bandwidth (but not more than 200000
> KB/sec) for recovery.
> md: using 128k window, over a total of 117218176 blocks.
> ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata4.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata4.00: status: { DRDY }
> ata4: hard resetting link
> ata4: port is slow to respond, please be patient (Status 0x80)
> ata4: softreset failed (device not ready)
> ata4: hard resetting link
> ata4: port is slow to respond, please be patient (Status 0x80)
> ata4: softreset failed (device not ready)
> ata4: hard resetting link
> ata4: port is slow to respond, please be patient (Status 0x80)
> ata4: softreset failed (device not ready)
> ata4: limiting SATA link speed to 1.5 Gbps
> ata4: hard resetting link
> ata4: softreset failed (device not ready)
> ata4: reset failed, giving up
> ata4.00: disabled


Are you sure this is not a hardware problem (bad disk, cable, etc?) Is
it always ata4 that fails?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/