pnpacpi: exceeded the max number of IO resources: 24 - Kernel

This is a discussion on pnpacpi: exceeded the max number of IO resources: 24 - Kernel ; During boot with v2.6.24-rc6-125-g5356f66 on my Toshiba Satellite A40 laptop, I suddenly get the following message (repeated 22 times!): pnpacpi: exceeded the max number of IO resources: 24 Last time I tested 2.6.24 on that box was after the initial ...

+ Reply to Thread
Results 1 to 5 of 5

Thread: pnpacpi: exceeded the max number of IO resources: 24

  1. pnpacpi: exceeded the max number of IO resources: 24

    During boot with v2.6.24-rc6-125-g5356f66 on my Toshiba Satellite A40
    laptop, I suddenly get the following message (repeated 22 times!):
    pnpacpi: exceeded the max number of IO resources: 24

    Last time I tested 2.6.24 on that box was after the initial merge, but
    before -rc1. Then those lines were not present.

    Looks like the messages originate from a7839e96 by Zhao Yakui and that
    patch just adds the kernel messages so it was probably a hidden issue
    before, but I cannot determine if I should be worried or not.


    Possibly unrelated and harmless, but there's also a major change in reported
    iomem/ioport ranges (first 5 lines basically identical, rest new):
    -pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
    -pnp: 00:00: iomem range 0xe0000-0xeffff could not be reserved
    -pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
    -pnp: 00:00: iomem range 0x100000-0x1ef3ffff could not be reserved
    +system 00:00: iomem range 0x0-0x9ffff could not be reserved
    +system 00:00: iomem range 0xe0000-0xeffff could not be reserved
    +system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    +system 00:00: iomem range 0x100000-0x1ef3ffff could not be reserved
    +system 00:00: iomem range 0x1ef40000-0x1ef4ffff could not be reserved
    +system 00:00: iomem range 0x1ef50000-0x1effffff could not be reserved
    +system 00:00: iomem range 0xfec10000-0xfec1ffff could not be reserved
    +system 00:00: iomem range 0xfeda0000-0xfedbffff could not be reserved
    +system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
    +system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
    +system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
    +system 00:00: iomem range 0xffe80000-0xffffffff could not be reserved
    +system 00:08: ioport range 0x1e0-0x1ef has been reserved
    +system 00:08: ioport range 0x480-0x48f has been reserved
    +system 00:08: ioport range 0x680-0x6ff has been reserved
    +system 00:08: ioport range 0x800-0x80f has been reserved
    +system 00:08: ioport range 0xd800-0xd87f has been reserved
    +system 00:08: ioport range 0xd880-0xd89f has been reserved
    +system 00:08: ioport range 0xd8a0-0xd8bf has been reserved
    +system 00:08: ioport range 0xe000-0xe07f has been reserved
    +system 00:08: ioport range 0xe080-0xe0ff has been reserved
    +system 00:08: ioport range 0xe400-0xe47f has been reserved
    +system 00:08: ioport range 0xe480-0xe4ff has been reserved
    +system 00:08: ioport range 0xe800-0xe87f has been reserved
    +system 00:08: ioport range 0xe880-0xe8ff has been reserved
    +system 00:08: ioport range 0xec00-0xec7f has been reserved
    +system 00:08: ioport range 0xec80-0xecff has been reserved
    +system 00:08: ioport range 0xeeac-0xeeac has been reserved

    Full dmesg and config attached.

    Processor: Mobile Intel Pentium 4 (2.8GHz)
    lspci:
    00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
    00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
    00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
    00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
    00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03)
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03)
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03)
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
    00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03)
    00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
    00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03)
    01:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller [8086:103d] (rev 83)
    01:0b.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support [1179:0617] (rev 33)


    Linux version 2.6.24-rc6 (root@faramir) (gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4)) #1 SMP Mon Dec 24 04:24:37 CET 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
    BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
    BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001ef40000 (usable)
    BIOS-e820: 000000001ef40000 - 000000001ef50000 (ACPI data)
    BIOS-e820: 000000001ef50000 - 000000001f000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
    BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    495MB LOWMEM available.
    Entering add_active_range(0, 0, 126784) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 126784
    HighMem 126784 -> 126784
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 126784
    On node 0 totalpages: 126784
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 958 pages used for memmap
    Normal zone: 121730 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F0180, 0014 (r0 TOSHIB)
    ACPI: RSDT 1EF40000, 0038 (r1 TOSHIB 750 970814 TASM 4010000)
    ACPI: FACP 1EF40060, 0084 (r2 TOSHIB 750 20030101 TASM 4010000)
    ACPI: DSDT 1EF40558, 4B72 (r1 TOSHIB A000C 20031216 MSFT 100000E)
    ACPI: FACS 000EEE00, 0040
    ACPI: SSDT 1EF402CA, 0082 (r1 TOSHIB A000C 20030917 MSFT 100000E)
    ACPI: DBGP 1EF400E4, 0034 (r1 TOSHIB 750 970814 TASM 4010000)
    ACPI: BOOT 1EF40038, 0028 (r1 TOSHIB 750 970814 TASM 4010000)
    ACPI: APIC 1EF40118, 0062 (r1 TOSHIB 750 970814 TASM 4010000)
    ACPI: PM-Timer IO Port: 0xd808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 20000000 (gap: 1f000000:dfc00000)
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
    swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000ee000
    swsusp: Registered nosave memory region: 00000000000ee000 - 00000000000ef000
    swsusp: Registered nosave memory region: 00000000000ef000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125794
    Kernel command line: root=/dev/hda3 resume=/dev/hda6 ro vga=791 netconsole=@10.19.66.11/,@10.19.66.12/
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 2793.077 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 496396k/507136k available (1680k kernel code, 10148k reserved, 671k data, 216k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xdf800000 - 0xff7fe000 ( 511 MB)
    lowmem : 0xc0000000 - 0xdef40000 ( 495 MB)
    .init : 0xc0353000 - 0xc0389000 ( 216 kB)
    .data : 0xc02a43d8 - 0xc034c124 ( 671 kB)
    .text : 0xc0100000 - 0xc02a43d8 (1680 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 5590.71 BogoMIPS (lpj=11181434)
    Security Framework initialized
    SELinux: Disabled at boot.
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Hyper-Threading is disabled
    CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 11k freed
    ACPI: Core revision 20070126
    CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
    Total of 1 processors activated (5590.71 BogoMIPS).
    ENABLING IO-APIC IRQs
    ...TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    Brought up 1 CPUs
    CPU0 attaching sched-domain:
    domain 0: span 01
    groups: 01
    net_namespace: 64 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd2fe, last bus=3
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region eec0-eeff claimed by ICH4 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
    ACPI: Power Resource [PFAN] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnpacpi: exceeded the max number of IO resources: 24
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    PnPBIOS: Disabled by ACPI PNP
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Cannot allocate resource region 4 of device 0000:00:1d.0
    PCI: Cannot allocate resource region 4 of device 0000:00:1d.1
    ACPI: RTC can wake from S4
    Time: tsc clocksource has been installed.
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xe0000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x1ef3ffff could not be reserved
    system 00:00: iomem range 0x1ef40000-0x1ef4ffff could not be reserved
    system 00:00: iomem range 0x1ef50000-0x1effffff could not be reserved
    system 00:00: iomem range 0xfec10000-0xfec1ffff could not be reserved
    system 00:00: iomem range 0xfeda0000-0xfedbffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
    system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
    system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
    system 00:00: iomem range 0xffe80000-0xffffffff could not be reserved
    system 00:08: ioport range 0x1e0-0x1ef has been reserved
    system 00:08: ioport range 0x480-0x48f has been reserved
    system 00:08: ioport range 0x680-0x6ff has been reserved
    system 00:08: ioport range 0x800-0x80f has been reserved
    system 00:08: ioport range 0xd800-0xd87f has been reserved
    system 00:08: ioport range 0xd880-0xd89f has been reserved
    system 00:08: ioport range 0xd8a0-0xd8bf has been reserved
    system 00:08: ioport range 0xe000-0xe07f has been reserved
    system 00:08: ioport range 0xe080-0xe0ff has been reserved
    system 00:08: ioport range 0xe400-0xe47f has been reserved
    system 00:08: ioport range 0xe480-0xe4ff has been reserved
    system 00:08: ioport range 0xe800-0xe87f has been reserved
    system 00:08: ioport range 0xe880-0xe8ff has been reserved
    system 00:08: ioport range 0xec00-0xec7f has been reserved
    system 00:08: ioport range 0xec80-0xecff has been reserved
    system 00:08: ioport range 0xeeac-0xeeac has been reserved
    PCI: Bus 2, cardbus bridge: 0000:01:0b.0
    IO window: 0000c000-0000c0ff
    IO window: 0000c400-0000c4ff
    PREFETCH window: 30000000-33ffffff
    MEM window: 34000000-37ffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: c000-cfff
    MEM window: cff00000-cfffffff
    PREFETCH window: disabled.
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    PCI: Enabling device 0000:01:0b.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 18 (level, low) -> IRQ 16
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 2805k freed
    Simple Boot Flag at 0x7c set to 0x1
    audit: initializing netlink socket (disabled)
    audit(1198470240.492:1): initialized
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:00:02.0
    PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
    vesafb: framebuffer at 0xd8000000, mapped to 0xdf880000, using 3072k, total 16192k
    vesafb: mode is 1024x768x16, linelength=2048, pages=9
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    Switched to high resolution mode on CPU 0
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI interrupt for device 0000:00:1f.6 disabled
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 18
    e100: eth0: e100_probe: addr 0xcffff000, irq 18, MAC addr 00:08:0d:17:bf:f5
    netconsole: local port 6665
    netconsole: local IP 10.19.66.11
    netconsole: interface eth0
    netconsole: remote port 6666
    netconsole: remote IP 10.19.66.12
    netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
    netconsole: device eth0 not up yet, forcing it
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    netconsole: carrier detect appears untrustworthy, waiting 4 seconds
    console [netcon0] enabled
    netconsole: network logging started
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 216k freed
    input: AT Translated Set 2 keyboard as /class/input/input0
    ACPI: Fan [FAN] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Thermal Zone [THRM] (33 C)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 19, io base 0x000018c0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 20, io base 0x000018e0
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    Marking TSC unstable due to: TSC halts in idle.
    Time: acpi_pm clocksource has been installed.
    PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 21, io mem 0x28000000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH4: IDE controller (0x8086:0x24ca rev 0x03) at PCI slot 0000:00:1f.1
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
    ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hdaMA, hdbio
    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdcMA, hddio
    Probing IDE interface ide0...
    usb 1-2: new low speed USB device using uhci_hcd and address 2
    usb 1-2: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    hda: HTS541080G9AT00, ATA DISK drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hda: UDMA/100 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive
    hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hdc: UDMA/33 mode selected
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 512KiB
    hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63
    hda: cache flushes supported
    hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
    hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
    Attempting manual resume
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Real Time Clock Driver v1.12ac
    input: PC Speaker as /class/input/input2
    Linux agpgart interface v0.102
    agpgart: Detected an Intel 855GM Chipset.
    agpgart: Detected 16252K stolen memory.
    agpgart: AGP aperture is 128M @ 0xd8000000
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Power Button (CM) as /class/input/input5
    ACPI: Power Button (CM) [PWRB]
    ACPI: AC Adapter [ADP1] (on-line)
    ACPI: Battery Slot [BAT1] (battery present)
    input: Video Bus as /class/input/input6
    ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
    Yenta: CardBus bridge found at 0000:01:0b.0 [1179:0001]
    Yenta: ISA IRQ mask 0x04b8, PCI irq 16
    Socket status: 30000007
    pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
    cs: IO port probe 0xc000-0xcfff: clean.
    pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1f.6 to 64
    PCI: Enabling device 0000:00:1f.5 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    input: PS/2 Mouse as /class/input/input7
    input: AlpsPS/2 ALPS GlidePoint as /class/input/input8
    iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    parport_pc 00:09: activated
    parport_pc 00:09: reported by Plug and Play ACPI
    parport_pc 00:09: disabled
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    intel_rng: FWH not detected
    intel8x0_measure_ac97_clock: measured 55397 usecs
    intel8x0: clocking to 48000
    Adding 554200k swap on /dev/hda6. Priority:-1 extents:1 across:554200k
    EXT3 FS on hda3, internal journal
    toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
    toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
    fuse init (API version 7.9)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Clocksource tsc unstable (delta = -68660348 ns)
    eth0: no IPv6 routers present

    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.24-rc6
    # Mon Dec 24 04:21:26 2007
    #
    # CONFIG_64BIT is not set
    CONFIG_X86_32=y
    # CONFIG_X86_64 is not set
    CONFIG_X86=y
    CONFIG_GENERIC_TIME=y
    CONFIG_GENERIC_CMOS_UPDATE=y
    CONFIG_CLOCKSOURCE_WATCHDOG=y
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_SEMAPHORE_SLEEPERS=y
    CONFIG_MMU=y
    CONFIG_ZONE_DMA=y
    CONFIG_QUICKLIST=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    CONFIG_GENERIC_BUG=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_DMI=y
    # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    # CONFIG_ARCH_HAS_ILOG2_U32 is not set
    # CONFIG_ARCH_HAS_ILOG2_U64 is not set
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    # CONFIG_GENERIC_TIME_VSYSCALL is not set
    CONFIG_ARCH_SUPPORTS_OPROFILE=y
    # CONFIG_ZONE_DMA32 is not set
    CONFIG_ARCH_POPULATES_NODE_MAP=y
    # CONFIG_AUDIT_ARCH is not set
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_GENERIC_PENDING_IRQ=y
    CONFIG_X86_SMP=y
    CONFIG_X86_HT=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_X86_TRAMPOLINE=y
    CONFIG_KTIME_SCALAR=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

    #
    # General setup
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_LOCALVERSION=""
    # CONFIG_LOCALVERSION_AUTO is not set
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_BSD_PROCESS_ACCT_V3=y
    # CONFIG_TASKSTATS is not set
    # CONFIG_USER_NS is not set
    # CONFIG_PID_NS is not set
    CONFIG_AUDIT=y
    # CONFIG_AUDITSYSCALL is not set
    # CONFIG_IKCONFIG is not set
    CONFIG_LOG_BUF_SHIFT=15
    # CONFIG_CGROUPS is not set
    CONFIG_FAIR_GROUP_SCHED=y
    CONFIG_FAIR_USER_SCHED=y
    # CONFIG_FAIR_CGROUP_SCHED is not set
    CONFIG_SYSFS_DEPRECATED=y
    # CONFIG_RELAY is not set
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_CC_OPTIMIZE_FOR_SIZE=y
    CONFIG_SYSCTL=y
    # CONFIG_EMBEDDED is not set
    CONFIG_UID16=y
    CONFIG_SYSCTL_SYSCALL=y
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_ANON_INODES=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_SLAB=y
    # CONFIG_SLUB is not set
    # CONFIG_SLOB is not set
    CONFIG_RT_MUTEXES=y
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_MODVERSIONS=y
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y
    CONFIG_BLOCK=y
    CONFIG_LBD=y
    # CONFIG_BLK_DEV_IO_TRACE is not set
    CONFIG_LSF=y
    # CONFIG_BLK_DEV_BSG is not set

    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_DEFAULT_AS is not set
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"

    #
    # Processor type and features
    #
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ=y
    CONFIG_HIGH_RES_TIMERS=y
    CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
    CONFIG_SMP=y
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_X86_VSMP is not set
    CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
    # CONFIG_PARAVIRT_GUEST is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    CONFIG_M686=y
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MGEODEGX1 is not set
    # CONFIG_MGEODE_LX is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_MVIAC7 is not set
    # CONFIG_MPSC is not set
    # CONFIG_MCORE2 is not set
    # CONFIG_GENERIC_CPU is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_L1_CACHE_SHIFT=5
    CONFIG_X86_XADD=y
    CONFIG_X86_PPRO_FENCE=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_TSC=y
    CONFIG_X86_CMOV=y
    CONFIG_X86_MINIMUM_CPU_FAMILY=4
    CONFIG_HPET_TIMER=y
    CONFIG_NR_CPUS=8
    CONFIG_SCHED_SMT=y
    CONFIG_SCHED_MC=y
    CONFIG_PREEMPT_NONE=y
    # CONFIG_PREEMPT_VOLUNTARY is not set
    # CONFIG_PREEMPT is not set
    # CONFIG_PREEMPT_BKL is not set
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=m
    CONFIG_X86_MCE_P4THERMAL=y
    CONFIG_VM86=y
    CONFIG_TOSHIBA=m
    # CONFIG_I8K is not set
    # CONFIG_X86_REBOOTFIXUPS is not set
    CONFIG_MICROCODE=m
    CONFIG_MICROCODE_OLD_INTERFACE=y
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m
    # CONFIG_NOHIGHMEM is not set
    CONFIG_HIGHMEM4G=y
    # CONFIG_HIGHMEM64G is not set
    CONFIG_PAGE_OFFSET=0xC0000000
    CONFIG_HIGHMEM=y
    CONFIG_ARCH_FLATMEM_ENABLE=y
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    # CONFIG_DISCONTIGMEM_MANUAL is not set
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    CONFIG_SPARSEMEM_STATIC=y
    # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
    CONFIG_SPLIT_PTLOCK_CPUS=4
    # CONFIG_RESOURCES_64BIT is not set
    CONFIG_ZONE_DMA_FLAG=1
    CONFIG_BOUNCE=y
    CONFIG_NR_QUICK=1
    CONFIG_VIRT_TO_BUS=y
    # CONFIG_HIGHPTE is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    CONFIG_EFI=y
    # CONFIG_IRQBALANCE is not set
    CONFIG_BOOT_IOREMAP=y
    # CONFIG_SECCOMP is not set
    # CONFIG_HZ_100 is not set
    CONFIG_HZ_250=y
    # CONFIG_HZ_300 is not set
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=250
    CONFIG_KEXEC=y
    # CONFIG_CRASH_DUMP is not set
    CONFIG_PHYSICAL_START=0x100000
    # CONFIG_RELOCATABLE is not set
    CONFIG_PHYSICAL_ALIGN=0x100000
    CONFIG_HOTPLUG_CPU=y
    CONFIG_COMPAT_VDSO=y
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

    #
    # Power management options
    #
    CONFIG_PM=y
    CONFIG_PM_LEGACY=y
    # CONFIG_PM_DEBUG is not set
    CONFIG_PM_SLEEP_SMP=y
    CONFIG_PM_SLEEP=y
    CONFIG_SUSPEND_SMP_POSSIBLE=y
    CONFIG_SUSPEND=y
    CONFIG_HIBERNATION_SMP_POSSIBLE=y
    CONFIG_HIBERNATION=y
    CONFIG_PM_STD_PARTITION=""
    CONFIG_ACPI=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_PROCFS=y
    CONFIG_ACPI_PROCFS_POWER=y
    CONFIG_ACPI_PROC_EVENT=y
    CONFIG_ACPI_AC=m
    CONFIG_ACPI_BATTERY=m
    CONFIG_ACPI_BUTTON=m
    CONFIG_ACPI_VIDEO=m
    CONFIG_ACPI_FAN=m
    CONFIG_ACPI_DOCK=m
    CONFIG_ACPI_BAY=m
    CONFIG_ACPI_PROCESSOR=m
    CONFIG_ACPI_HOTPLUG_CPU=y
    CONFIG_ACPI_THERMAL=m
    # CONFIG_ACPI_ASUS is not set
    CONFIG_ACPI_TOSHIBA=m
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=m
    # CONFIG_ACPI_SBS is not set
    # CONFIG_APM is not set

    #
    # CPU Frequency scaling
    #
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=m
    # CONFIG_CPU_FREQ_DEBUG is not set
    CONFIG_CPU_FREQ_STAT=m
    # CONFIG_CPU_FREQ_STAT_DETAILS is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=m
    CONFIG_CPU_FREQ_GOV_ONDEMAND=m
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

    #
    # CPUFreq processor drivers
    #
    CONFIG_X86_ACPI_CPUFREQ=m
    CONFIG_X86_POWERNOW_K6=m
    CONFIG_X86_POWERNOW_K7=m
    CONFIG_X86_POWERNOW_K7_ACPI=y
    CONFIG_X86_POWERNOW_K8=m
    CONFIG_X86_POWERNOW_K8_ACPI=y
    CONFIG_X86_GX_SUSPMOD=m
    CONFIG_X86_SPEEDSTEP_CENTRINO=m
    CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
    CONFIG_X86_SPEEDSTEP_ICH=m
    CONFIG_X86_SPEEDSTEP_SMI=m
    CONFIG_X86_P4_CLOCKMOD=m
    CONFIG_X86_CPUFREQ_NFORCE2=m
    CONFIG_X86_LONGRUN=m
    CONFIG_X86_LONGHAUL=m
    CONFIG_X86_E_POWERSAVER=m

    #
    # shared options
    #
    # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
    CONFIG_X86_SPEEDSTEP_LIB=m
    CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
    CONFIG_CPU_IDLE=y
    CONFIG_CPU_IDLE_GOV_LADDER=y
    CONFIG_CPU_IDLE_GOV_MENU=y

    #
    # Bus options (PCI etc.)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCI_DOMAINS=y
    # CONFIG_PCIEPORTBUS is not set
    CONFIG_ARCH_SUPPORTS_MSI=y
    CONFIG_PCI_MSI=y
    CONFIG_PCI_LEGACY=y
    # CONFIG_PCI_DEBUG is not set
    CONFIG_HT_IRQ=y
    CONFIG_ISA_DMA_API=y
    CONFIG_ISA=y
    # CONFIG_EISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set
    CONFIG_PCCARD=m
    # CONFIG_PCMCIA_DEBUG is not set
    CONFIG_PCMCIA=m
    CONFIG_PCMCIA_LOAD_CIS=y
    CONFIG_PCMCIA_IOCTL=y
    CONFIG_CARDBUS=y

    #
    # PC-card bridges
    #
    CONFIG_YENTA=m
    CONFIG_YENTA_O2=y
    CONFIG_YENTA_RICOH=y
    CONFIG_YENTA_TI=y
    CONFIG_YENTA_ENE_TUNE=y
    CONFIG_YENTA_TOSHIBA=y
    CONFIG_PD6729=m
    CONFIG_I82092=m
    CONFIG_I82365=m
    CONFIG_TCIC=m
    CONFIG_PCMCIA_PROBE=y
    CONFIG_PCCARD_NONSTATIC=m
    CONFIG_HOTPLUG_PCI=m
    CONFIG_HOTPLUG_PCI_FAKE=m
    CONFIG_HOTPLUG_PCI_COMPAQ=m
    # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
    CONFIG_HOTPLUG_PCI_IBM=m
    CONFIG_HOTPLUG_PCI_ACPI=m
    CONFIG_HOTPLUG_PCI_ACPI_IBM=m
    CONFIG_HOTPLUG_PCI_CPCI=y
    CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
    CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
    CONFIG_HOTPLUG_PCI_SHPC=m

    #
    # Executable file formats / Emulations
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=m
    CONFIG_BINFMT_MISC=m

    #
    # Networking
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_UNIX=y
    CONFIG_XFRM=y
    CONFIG_XFRM_USER=m
    # CONFIG_XFRM_SUB_POLICY is not set
    # CONFIG_XFRM_MIGRATE is not set
    CONFIG_NET_KEY=m
    # CONFIG_NET_KEY_MIGRATE is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_ASK_IP_FIB_HASH=y
    # CONFIG_IP_FIB_TRIE is not set
    CONFIG_IP_FIB_HASH=y
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    CONFIG_IP_ROUTE_VERBOSE=y
    # CONFIG_IP_PNP is not set
    CONFIG_NET_IPIP=m
    CONFIG_NET_IPGRE=m
    CONFIG_NET_IPGRE_BROADCAST=y
    CONFIG_IP_MROUTE=y
    CONFIG_IP_PIMSM_V1=y
    CONFIG_IP_PIMSM_V2=y
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m
    CONFIG_INET_XFRM_TUNNEL=m
    CONFIG_INET_TUNNEL=m
    CONFIG_INET_XFRM_MODE_TRANSPORT=m
    CONFIG_INET_XFRM_MODE_TUNNEL=m
    CONFIG_INET_XFRM_MODE_BEET=m
    CONFIG_INET_LRO=m
    CONFIG_INET_DIAG=m
    CONFIG_INET_TCP_DIAG=m
    CONFIG_TCP_CONG_ADVANCED=y
    CONFIG_TCP_CONG_BIC=y
    CONFIG_TCP_CONG_CUBIC=m
    CONFIG_TCP_CONG_WESTWOOD=m
    CONFIG_TCP_CONG_HTCP=m
    CONFIG_TCP_CONG_HSTCP=m
    CONFIG_TCP_CONG_HYBLA=m
    CONFIG_TCP_CONG_VEGAS=m
    CONFIG_TCP_CONG_SCALABLE=m
    CONFIG_TCP_CONG_LP=m
    CONFIG_TCP_CONG_VENO=m
    CONFIG_TCP_CONG_YEAH=m
    CONFIG_TCP_CONG_ILLINOIS=m
    CONFIG_DEFAULT_BIC=y
    # CONFIG_DEFAULT_CUBIC is not set
    # CONFIG_DEFAULT_HTCP is not set
    # CONFIG_DEFAULT_VEGAS is not set
    # CONFIG_DEFAULT_WESTWOOD is not set
    # CONFIG_DEFAULT_RENO is not set
    CONFIG_DEFAULT_TCP_CONG="bic"
    # CONFIG_TCP_MD5SIG is not set
    CONFIG_IP_VS=m
    # CONFIG_IP_VS_DEBUG is not set
    CONFIG_IP_VS_TAB_BITS=12

    #
    # IPVS transport protocol load balancing support
    #
    CONFIG_IP_VS_PROTO_TCP=y
    CONFIG_IP_VS_PROTO_UDP=y
    CONFIG_IP_VS_PROTO_ESP=y
    CONFIG_IP_VS_PROTO_AH=y

    #
    # IPVS scheduler
    #
    CONFIG_IP_VS_RR=m
    CONFIG_IP_VS_WRR=m
    CONFIG_IP_VS_LC=m
    CONFIG_IP_VS_WLC=m
    CONFIG_IP_VS_LBLC=m
    CONFIG_IP_VS_LBLCR=m
    CONFIG_IP_VS_DH=m
    CONFIG_IP_VS_SH=m
    CONFIG_IP_VS_SED=m
    CONFIG_IP_VS_NQ=m

    #
    # IPVS application helper
    #
    CONFIG_IP_VS_FTP=m
    CONFIG_IPV6=m
    CONFIG_IPV6_PRIVACY=y
    # CONFIG_IPV6_ROUTER_PREF is not set
    # CONFIG_IPV6_OPTIMISTIC_DAD is not set
    CONFIG_INET6_AH=m
    CONFIG_INET6_ESP=m
    CONFIG_INET6_IPCOMP=m
    # CONFIG_IPV6_MIP6 is not set
    CONFIG_INET6_XFRM_TUNNEL=m
    CONFIG_INET6_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_TRANSPORT=m
    CONFIG_INET6_XFRM_MODE_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_BEET=m
    CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
    CONFIG_IPV6_SIT=m
    CONFIG_IPV6_TUNNEL=m
    # CONFIG_IPV6_MULTIPLE_TABLES is not set
    # CONFIG_NETLABEL is not set
    CONFIG_NETWORK_SECMARK=y
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set
    CONFIG_BRIDGE_NETFILTER=y

    #
    # Core Netfilter Configuration
    #
    CONFIG_NETFILTER_NETLINK=m
    CONFIG_NETFILTER_NETLINK_QUEUE=m
    CONFIG_NETFILTER_NETLINK_LOG=m
    CONFIG_NF_CONNTRACK_ENABLED=m
    CONFIG_NF_CONNTRACK=m
    CONFIG_NF_CT_ACCT=y
    CONFIG_NF_CONNTRACK_MARK=y
    CONFIG_NF_CONNTRACK_SECMARK=y
    CONFIG_NF_CONNTRACK_EVENTS=y
    CONFIG_NF_CT_PROTO_GRE=m
    CONFIG_NF_CT_PROTO_SCTP=m
    # CONFIG_NF_CT_PROTO_UDPLITE is not set
    CONFIG_NF_CONNTRACK_AMANDA=m
    CONFIG_NF_CONNTRACK_FTP=m
    CONFIG_NF_CONNTRACK_H323=m
    CONFIG_NF_CONNTRACK_IRC=m
    CONFIG_NF_CONNTRACK_NETBIOS_NS=m
    CONFIG_NF_CONNTRACK_PPTP=m
    CONFIG_NF_CONNTRACK_SANE=m
    CONFIG_NF_CONNTRACK_SIP=m
    CONFIG_NF_CONNTRACK_TFTP=m
    CONFIG_NF_CT_NETLINK=m
    CONFIG_NETFILTER_XTABLES=m
    CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
    CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
    CONFIG_NETFILTER_XT_TARGET_DSCP=m
    CONFIG_NETFILTER_XT_TARGET_MARK=m
    CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
    CONFIG_NETFILTER_XT_TARGET_NFLOG=m
    CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
    # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
    CONFIG_NETFILTER_XT_TARGET_SECMARK=m
    CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
    CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
    CONFIG_NETFILTER_XT_MATCH_COMMENT=m
    CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
    # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
    CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
    CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
    CONFIG_NETFILTER_XT_MATCH_DCCP=m
    CONFIG_NETFILTER_XT_MATCH_DSCP=m
    CONFIG_NETFILTER_XT_MATCH_ESP=m
    CONFIG_NETFILTER_XT_MATCH_HELPER=m
    CONFIG_NETFILTER_XT_MATCH_LENGTH=m
    CONFIG_NETFILTER_XT_MATCH_LIMIT=m
    CONFIG_NETFILTER_XT_MATCH_MAC=m
    CONFIG_NETFILTER_XT_MATCH_MARK=m
    CONFIG_NETFILTER_XT_MATCH_POLICY=m
    CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
    CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
    CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
    CONFIG_NETFILTER_XT_MATCH_QUOTA=m
    CONFIG_NETFILTER_XT_MATCH_REALM=m
    CONFIG_NETFILTER_XT_MATCH_SCTP=m
    CONFIG_NETFILTER_XT_MATCH_STATE=m
    CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
    CONFIG_NETFILTER_XT_MATCH_STRING=m
    CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
    CONFIG_NETFILTER_XT_MATCH_TIME=m
    # CONFIG_NETFILTER_XT_MATCH_U32 is not set
    CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

    #
    # IP: Netfilter Configuration
    #
    CONFIG_NF_CONNTRACK_IPV4=m
    CONFIG_NF_CONNTRACK_PROC_COMPAT=y
    CONFIG_IP_NF_QUEUE=m
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_IPRANGE=m
    CONFIG_IP_NF_MATCH_TOS=m
    CONFIG_IP_NF_MATCH_RECENT=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_AH=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_MATCH_OWNER=m
    CONFIG_IP_NF_MATCH_ADDRTYPE=m
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_NF_NAT=m
    CONFIG_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    CONFIG_IP_NF_TARGET_SAME=m
    CONFIG_NF_NAT_SNMP_BASIC=m
    CONFIG_NF_NAT_PROTO_GRE=m
    CONFIG_NF_NAT_FTP=m
    CONFIG_NF_NAT_IRC=m
    CONFIG_NF_NAT_TFTP=m
    CONFIG_NF_NAT_AMANDA=m
    CONFIG_NF_NAT_PPTP=m
    CONFIG_NF_NAT_H323=m
    CONFIG_NF_NAT_SIP=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_TOS=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_TTL=m
    CONFIG_IP_NF_TARGET_CLUSTERIP=m
    CONFIG_IP_NF_RAW=m
    CONFIG_IP_NF_ARPTABLES=m
    CONFIG_IP_NF_ARPFILTER=m
    CONFIG_IP_NF_ARP_MANGLE=m

    #
    # IPv6: Netfilter Configuration (EXPERIMENTAL)
    #
    CONFIG_NF_CONNTRACK_IPV6=m
    CONFIG_IP6_NF_QUEUE=m
    CONFIG_IP6_NF_IPTABLES=m
    CONFIG_IP6_NF_MATCH_RT=m
    CONFIG_IP6_NF_MATCH_OPTS=m
    CONFIG_IP6_NF_MATCH_FRAG=m
    CONFIG_IP6_NF_MATCH_HL=m
    CONFIG_IP6_NF_MATCH_OWNER=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=m
    CONFIG_IP6_NF_MATCH_AH=m
    CONFIG_IP6_NF_MATCH_MH=m
    CONFIG_IP6_NF_MATCH_EUI64=m
    CONFIG_IP6_NF_FILTER=m
    CONFIG_IP6_NF_TARGET_LOG=m
    CONFIG_IP6_NF_TARGET_REJECT=m
    CONFIG_IP6_NF_MANGLE=m
    CONFIG_IP6_NF_TARGET_HL=m
    CONFIG_IP6_NF_RAW=m

    #
    # Bridge: Netfilter Configuration
    #
    CONFIG_BRIDGE_NF_EBTABLES=m
    CONFIG_BRIDGE_EBT_BROUTE=m
    CONFIG_BRIDGE_EBT_T_FILTER=m
    CONFIG_BRIDGE_EBT_T_NAT=m
    CONFIG_BRIDGE_EBT_802_3=m
    CONFIG_BRIDGE_EBT_AMONG=m
    CONFIG_BRIDGE_EBT_ARP=m
    CONFIG_BRIDGE_EBT_IP=m
    CONFIG_BRIDGE_EBT_LIMIT=m
    CONFIG_BRIDGE_EBT_MARK=m
    CONFIG_BRIDGE_EBT_PKTTYPE=m
    CONFIG_BRIDGE_EBT_STP=m
    CONFIG_BRIDGE_EBT_VLAN=m
    CONFIG_BRIDGE_EBT_ARPREPLY=m
    CONFIG_BRIDGE_EBT_DNAT=m
    CONFIG_BRIDGE_EBT_MARK_T=m
    CONFIG_BRIDGE_EBT_REDIRECT=m
    CONFIG_BRIDGE_EBT_SNAT=m
    CONFIG_BRIDGE_EBT_LOG=m
    CONFIG_BRIDGE_EBT_ULOG=m
    # CONFIG_IP_DCCP is not set
    CONFIG_IP_SCTP=m
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    # CONFIG_SCTP_HMAC_SHA1 is not set
    CONFIG_SCTP_HMAC_MD5=y
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    CONFIG_BRIDGE=m
    CONFIG_VLAN_8021Q=m
    # CONFIG_DECNET is not set
    CONFIG_LLC=m
    CONFIG_LLC2=m
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    CONFIG_NET_SCHED=y

    #
    # Queueing/Scheduling
    #
    CONFIG_NET_SCH_CBQ=m
    CONFIG_NET_SCH_HTB=m
    CONFIG_NET_SCH_HFSC=m
    CONFIG_NET_SCH_PRIO=m
    # CONFIG_NET_SCH_RR is not set
    CONFIG_NET_SCH_RED=m
    CONFIG_NET_SCH_SFQ=m
    CONFIG_NET_SCH_TEQL=m
    CONFIG_NET_SCH_TBF=m
    CONFIG_NET_SCH_GRED=m
    CONFIG_NET_SCH_DSMARK=m
    CONFIG_NET_SCH_NETEM=m
    CONFIG_NET_SCH_INGRESS=m

    #
    # Classification
    #
    CONFIG_NET_CLS=y
    CONFIG_NET_CLS_BASIC=m
    CONFIG_NET_CLS_TCINDEX=m
    CONFIG_NET_CLS_ROUTE4=m
    CONFIG_NET_CLS_ROUTE=y
    CONFIG_NET_CLS_FW=m
    CONFIG_NET_CLS_U32=m
    CONFIG_CLS_U32_PERF=y
    CONFIG_CLS_U32_MARK=y
    CONFIG_NET_CLS_RSVP=m
    CONFIG_NET_CLS_RSVP6=m
    CONFIG_NET_EMATCH=y
    CONFIG_NET_EMATCH_STACK=32
    CONFIG_NET_EMATCH_CMP=m
    CONFIG_NET_EMATCH_NBYTE=m
    CONFIG_NET_EMATCH_U32=m
    CONFIG_NET_EMATCH_META=m
    CONFIG_NET_EMATCH_TEXT=m
    CONFIG_NET_CLS_ACT=y
    CONFIG_NET_ACT_POLICE=m
    CONFIG_NET_ACT_GACT=m
    CONFIG_GACT_PROB=y
    CONFIG_NET_ACT_MIRRED=m
    CONFIG_NET_ACT_IPT=m
    CONFIG_NET_ACT_NAT=m
    CONFIG_NET_ACT_PEDIT=m
    CONFIG_NET_ACT_SIMP=m
    # CONFIG_NET_CLS_POLICE is not set
    CONFIG_NET_CLS_IND=y
    CONFIG_NET_SCH_FIFO=y

    #
    # Network testing
    #
    CONFIG_NET_PKTGEN=m
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    CONFIG_AF_RXRPC=m
    # CONFIG_AF_RXRPC_DEBUG is not set
    CONFIG_RXKAD=m
    CONFIG_FIB_RULES=y

    #
    # Wireless
    #
    # CONFIG_CFG80211 is not set
    # CONFIG_WIRELESS_EXT is not set
    # CONFIG_MAC80211 is not set
    # CONFIG_IEEE80211 is not set
    CONFIG_RFKILL=m
    CONFIG_RFKILL_INPUT=m
    # CONFIG_NET_9P is not set

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=m
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    # CONFIG_SYS_HYPERVISOR is not set
    CONFIG_CONNECTOR=m
    CONFIG_MTD=m
    # CONFIG_MTD_DEBUG is not set
    CONFIG_MTD_CONCAT=m
    CONFIG_MTD_PARTITIONS=y
    CONFIG_MTD_REDBOOT_PARTS=m
    CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
    # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
    # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

    #
    # User Modules And Translation Layers
    #
    CONFIG_MTD_CHAR=m
    CONFIG_MTD_BLKDEVS=m
    CONFIG_MTD_BLOCK=m
    CONFIG_MTD_BLOCK_RO=m
    CONFIG_FTL=m
    CONFIG_NFTL=m
    CONFIG_NFTL_RW=y
    CONFIG_INFTL=m
    CONFIG_RFD_FTL=m
    CONFIG_SSFDC=m
    # CONFIG_MTD_OOPS is not set

    #
    # RAM/ROM/Flash chip drivers
    #
    CONFIG_MTD_CFI=m
    CONFIG_MTD_JEDECPROBE=m
    CONFIG_MTD_GEN_PROBE=m
    # CONFIG_MTD_CFI_ADV_OPTIONS is not set
    CONFIG_MTD_MAP_BANK_WIDTH_1=y
    CONFIG_MTD_MAP_BANK_WIDTH_2=y
    CONFIG_MTD_MAP_BANK_WIDTH_4=y
    # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
    CONFIG_MTD_CFI_I1=y
    CONFIG_MTD_CFI_I2=y
    # CONFIG_MTD_CFI_I4 is not set
    # CONFIG_MTD_CFI_I8 is not set
    CONFIG_MTD_CFI_INTELEXT=m
    CONFIG_MTD_CFI_AMDSTD=m
    CONFIG_MTD_CFI_STAA=m
    CONFIG_MTD_CFI_UTIL=m
    CONFIG_MTD_RAM=m
    CONFIG_MTD_ROM=m
    CONFIG_MTD_ABSENT=m

    #
    # Mapping drivers for chip access
    #
    CONFIG_MTD_COMPLEX_MAPPINGS=y
    CONFIG_MTD_PHYSMAP=m
    CONFIG_MTD_PHYSMAP_START=0x8000000
    CONFIG_MTD_PHYSMAP_LEN=0x4000000
    CONFIG_MTD_PHYSMAP_BANKWIDTH=2
    CONFIG_MTD_PNC2000=m
    CONFIG_MTD_SC520CDP=m
    CONFIG_MTD_NETSC520=m
    CONFIG_MTD_TS5500=m
    CONFIG_MTD_SBC_GXX=m
    # CONFIG_MTD_AMD76XROM is not set
    # CONFIG_MTD_ICHXROM is not set
    # CONFIG_MTD_ESB2ROM is not set
    # CONFIG_MTD_CK804XROM is not set
    # CONFIG_MTD_SCB2_FLASH is not set
    CONFIG_MTD_NETtel=m
    CONFIG_MTD_DILNETPC=m
    CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
    # CONFIG_MTD_L440GX is not set
    CONFIG_MTD_PCI=m
    # CONFIG_MTD_INTEL_VR_NOR is not set
    CONFIG_MTD_PLATRAM=m

    #
    # Self-contained MTD device drivers
    #
    CONFIG_MTD_PMC551=m
    # CONFIG_MTD_PMC551_BUGFIX is not set
    # CONFIG_MTD_PMC551_DEBUG is not set
    CONFIG_MTD_SLRAM=m
    CONFIG_MTD_PHRAM=m
    CONFIG_MTD_MTDRAM=m
    CONFIG_MTDRAM_TOTAL_SIZE=4096
    CONFIG_MTDRAM_ERASE_SIZE=128
    CONFIG_MTD_BLOCK2MTD=m

    #
    # Disk-On-Chip Device Drivers
    #
    CONFIG_MTD_DOC2000=m
    CONFIG_MTD_DOC2001=m
    CONFIG_MTD_DOC2001PLUS=m
    CONFIG_MTD_DOCPROBE=m
    CONFIG_MTD_DOCECC=m
    # CONFIG_MTD_DOCPROBE_ADVANCED is not set
    CONFIG_MTD_DOCPROBE_ADDRESS=0
    CONFIG_MTD_NAND=m
    # CONFIG_MTD_NAND_VERIFY_WRITE is not set
    # CONFIG_MTD_NAND_ECC_SMC is not set
    # CONFIG_MTD_NAND_MUSEUM_IDS is not set
    CONFIG_MTD_NAND_IDS=m
    CONFIG_MTD_NAND_DISKONCHIP=m
    # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
    CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
    # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
    CONFIG_MTD_NAND_CAFE=m
    CONFIG_MTD_NAND_CS553X=m
    # CONFIG_MTD_NAND_NANDSIM is not set
    CONFIG_MTD_NAND_PLATFORM=m
    # CONFIG_MTD_ALAUDA is not set
    CONFIG_MTD_ONENAND=m
    CONFIG_MTD_ONENAND_VERIFY_WRITE=y
    # CONFIG_MTD_ONENAND_OTP is not set
    # CONFIG_MTD_ONENAND_2X_PROGRAM is not set
    # CONFIG_MTD_ONENAND_SIM is not set

    #
    # UBI - Unsorted block images
    #
    CONFIG_MTD_UBI=m
    CONFIG_MTD_UBI_WL_THRESHOLD=4096
    CONFIG_MTD_UBI_BEB_RESERVE=1
    # CONFIG_MTD_UBI_GLUEBI is not set

    #
    # UBI debugging options
    #
    # CONFIG_MTD_UBI_DEBUG is not set
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_SERIAL=m
    CONFIG_PARPORT_PC_FIFO=y
    # CONFIG_PARPORT_PC_SUPERIO is not set
    CONFIG_PARPORT_PC_PCMCIA=m
    # CONFIG_PARPORT_GSC is not set
    CONFIG_PARPORT_AX88796=m
    CONFIG_PARPORT_1284=y
    CONFIG_PARPORT_NOT_PC=y
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    CONFIG_ISAPNP=y
    CONFIG_PNPBIOS=y
    CONFIG_PNPBIOS_PROC_FS=y
    CONFIG_PNPACPI=y
    CONFIG_BLK_DEV=y
    CONFIG_BLK_DEV_FD=m
    CONFIG_BLK_DEV_XD=m
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=8192
    CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
    CONFIG_CDROM_PKTCDVD=m
    CONFIG_CDROM_PKTCDVD_BUFFERS=8
    # CONFIG_CDROM_PKTCDVD_WCACHE is not set
    # CONFIG_ATA_OVER_ETH is not set
    # CONFIG_MISC_DEVICES is not set
    CONFIG_IDE=m
    CONFIG_BLK_DEV_IDE=m

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=m
    # CONFIG_IDEDISK_MULTI_MODE is not set
    # CONFIG_BLK_DEV_IDECS is not set
    CONFIG_BLK_DEV_DELKIN=m
    CONFIG_BLK_DEV_IDECD=m
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    # CONFIG_BLK_DEV_IDESCSI is not set
    # CONFIG_BLK_DEV_IDEACPI is not set
    # CONFIG_IDE_TASK_IOCTL is not set
    CONFIG_IDE_PROC_FS=y

    #
    # IDE chipset support/bugfixes
    #
    CONFIG_IDE_GENERIC=m
    CONFIG_BLK_DEV_PLATFORM=m
    CONFIG_BLK_DEV_CMD640=y
    # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
    CONFIG_BLK_DEV_IDEPNP=y

    #
    # PCI IDE chipsets support
    #
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_IDEPCI_PCIBUS_ORDER is not set
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=m
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_CS5535 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_JMICRON is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    CONFIG_BLK_DEV_PIIX=m
    # CONFIG_BLK_DEV_IT8213 is not set
    # CONFIG_BLK_DEV_IT821X is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_BLK_DEV_TC86C001 is not set
    # CONFIG_IDE_ARM is not set

    #
    # Other IDE chipsets support
    #

    #
    # Note: most of these also require special kernel boot parameters
    #
    # CONFIG_BLK_DEV_4DRIVES is not set
    # CONFIG_BLK_DEV_ALI14XX is not set
    # CONFIG_BLK_DEV_DTC2278 is not set
    # CONFIG_BLK_DEV_HT6560B is not set
    # CONFIG_BLK_DEV_QD65XX is not set
    # CONFIG_BLK_DEV_UMC8672 is not set
    CONFIG_BLK_DEV_IDEDMA=y
    CONFIG_IDE_ARCH_OBSOLETE_INIT=y
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    CONFIG_RAID_ATTRS=m
    CONFIG_SCSI=m
    CONFIG_SCSI_DMA=y
    CONFIG_SCSI_TGT=m
    CONFIG_SCSI_NETLINK=y
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=m
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=m
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=m
    CONFIG_CHR_DEV_SCH=m

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    CONFIG_SCSI_MULTI_LUN=y
    CONFIG_SCSI_CONSTANTS=y
    CONFIG_SCSI_LOGGING=y
    CONFIG_SCSI_SCAN_ASYNC=y
    CONFIG_SCSI_WAIT_SCAN=m

    #
    # SCSI Transports
    #
    CONFIG_SCSI_SPI_ATTRS=m
    CONFIG_SCSI_FC_ATTRS=m
    # CONFIG_SCSI_FC_TGT_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    CONFIG_SCSI_SAS_ATTRS=m
    # CONFIG_SCSI_SAS_LIBSAS is not set
    # CONFIG_SCSI_SRP_ATTRS is not set
    # CONFIG_SCSI_LOWLEVEL is not set
    # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
    CONFIG_ATA=m
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_ACPI=y
    CONFIG_SATA_AHCI=m
    # CONFIG_SATA_SVW is not set
    CONFIG_ATA_PIIX=m
    # CONFIG_SATA_MV is not set
    # CONFIG_SATA_NV is not set
    # CONFIG_PDC_ADMA is not set
    # CONFIG_SATA_QSTOR is not set
    # CONFIG_SATA_PROMISE is not set
    # CONFIG_SATA_SX4 is not set
    # CONFIG_SATA_SIL is not set
    # CONFIG_SATA_SIL24 is not set
    # CONFIG_SATA_SIS is not set
    # CONFIG_SATA_ULI is not set
    # CONFIG_SATA_VIA is not set
    # CONFIG_SATA_VITESSE is not set
    # CONFIG_SATA_INIC162X is not set
    # CONFIG_PATA_ACPI is not set
    # CONFIG_PATA_ALI is not set
    # CONFIG_PATA_AMD is not set
    # CONFIG_PATA_ARTOP is not set
    # CONFIG_PATA_ATIIXP is not set
    # CONFIG_PATA_CMD640_PCI is not set
    # CONFIG_PATA_CMD64X is not set
    # CONFIG_PATA_CS5520 is not set
    # CONFIG_PATA_CS5530 is not set
    # CONFIG_PATA_CS5535 is not set
    # CONFIG_PATA_CS5536 is not set
    # CONFIG_PATA_CYPRESS is not set
    # CONFIG_PATA_EFAR is not set
    CONFIG_ATA_GENERIC=m
    # CONFIG_PATA_HPT366 is not set
    # CONFIG_PATA_HPT37X is not set
    # CONFIG_PATA_HPT3X2N is not set
    # CONFIG_PATA_HPT3X3 is not set
    CONFIG_PATA_ISAPNP=m
    # CONFIG_PATA_IT821X is not set
    # CONFIG_PATA_IT8213 is not set
    # CONFIG_PATA_JMICRON is not set
    CONFIG_PATA_LEGACY=m
    # CONFIG_PATA_TRIFLEX is not set
    CONFIG_PATA_MARVELL=m
    # CONFIG_PATA_MPIIX is not set
    # CONFIG_PATA_OLDPIIX is not set
    # CONFIG_PATA_NETCELL is not set
    # CONFIG_PATA_NS87410 is not set
    # CONFIG_PATA_NS87415 is not set
    # CONFIG_PATA_OPTI is not set
    # CONFIG_PATA_OPTIDMA is not set
    # CONFIG_PATA_PCMCIA is not set
    # CONFIG_PATA_PDC_OLD is not set
    # CONFIG_PATA_QDI is not set
    # CONFIG_PATA_RADISYS is not set
    # CONFIG_PATA_RZ1000 is not set
    # CONFIG_PATA_SC1200 is not set
    # CONFIG_PATA_SERVERWORKS is not set
    # CONFIG_PATA_PDC2027X is not set
    # CONFIG_PATA_SIL680 is not set
    # CONFIG_PATA_SIS is not set
    # CONFIG_PATA_VIA is not set
    # CONFIG_PATA_WINBOND is not set
    # CONFIG_PATA_WINBOND_VLB is not set
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=m
    CONFIG_MD_LINEAR=m
    CONFIG_MD_RAID0=m
    CONFIG_MD_RAID1=m
    CONFIG_MD_RAID10=m
    CONFIG_MD_RAID456=m
    CONFIG_MD_RAID5_RESHAPE=y
    CONFIG_MD_MULTIPATH=m
    CONFIG_MD_FAULTY=m
    CONFIG_BLK_DEV_DM=m
    # CONFIG_DM_DEBUG is not set
    CONFIG_DM_CRYPT=m
    CONFIG_DM_SNAPSHOT=m
    CONFIG_DM_MIRROR=m
    CONFIG_DM_ZERO=m
    CONFIG_DM_MULTIPATH=m
    CONFIG_DM_MULTIPATH_EMC=m
    # CONFIG_DM_MULTIPATH_RDAC is not set
    # CONFIG_DM_MULTIPATH_HP is not set
    CONFIG_DM_DELAY=m
    # CONFIG_DM_UEVENT is not set
    CONFIG_FUSION=y
    CONFIG_FUSION_SPI=m
    CONFIG_FUSION_FC=m
    CONFIG_FUSION_SAS=m
    CONFIG_FUSION_MAX_SGE=40
    CONFIG_FUSION_CTL=m
    # CONFIG_FUSION_LOGGING is not set

    #
    # IEEE 1394 (FireWire) support
    #
    CONFIG_FIREWIRE=m
    CONFIG_FIREWIRE_OHCI=m
    CONFIG_FIREWIRE_SBP2=m
    # CONFIG_IEEE1394 is not set
    CONFIG_I2O=m
    CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
    CONFIG_I2O_EXT_ADAPTEC=y
    CONFIG_I2O_CONFIG=m
    CONFIG_I2O_CONFIG_OLD_IOCTL=y
    CONFIG_I2O_BUS=m
    CONFIG_I2O_BLOCK=m
    CONFIG_I2O_SCSI=m
    CONFIG_I2O_PROC=m
    # CONFIG_MACINTOSH_DRIVERS is not set
    CONFIG_NETDEVICES=y
    # CONFIG_NETDEVICES_MULTIQUEUE is not set
    CONFIG_IFB=m
    CONFIG_DUMMY=m
    CONFIG_BONDING=m
    # CONFIG_MACVLAN is not set
    CONFIG_EQUALIZER=m
    CONFIG_TUN=m
    CONFIG_VETH=m
    # CONFIG_NET_SB1000 is not set
    # CONFIG_IP1000 is not set
    # CONFIG_ARCNET is not set
    # CONFIG_PHYLIB is not set
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_CASSINI is not set
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set
    # CONFIG_NET_TULIP is not set
    # CONFIG_AT1700 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_HP100 is not set
    # CONFIG_NET_ISA is not set
    # CONFIG_IBM_NEW_EMAC_ZMII is not set
    # CONFIG_IBM_NEW_EMAC_RGMII is not set
    # CONFIG_IBM_NEW_EMAC_TAH is not set
    # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
    CONFIG_NET_PCI=y
    CONFIG_PCNET32=m
    # CONFIG_PCNET32_NAPI is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_AC3200 is not set
    # CONFIG_APRICOT is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_CS89x0 is not set
    # CONFIG_EEPRO100 is not set
    CONFIG_E100=y
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    # CONFIG_8139TOO is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_SC92031 is not set
    # CONFIG_NET_POCKET is not set
    # CONFIG_NETDEV_1000 is not set
    # CONFIG_NETDEV_10000 is not set
    # CONFIG_TR is not set

    #
    # Wireless LAN
    #
    # CONFIG_WLAN_PRE80211 is not set
    # CONFIG_WLAN_80211 is not set

    #
    # USB Network Adapters
    #
    CONFIG_USB_CATC=m
    CONFIG_USB_KAWETH=m
    CONFIG_USB_PEGASUS=m
    CONFIG_USB_RTL8150=m
    CONFIG_USB_USBNET=m
    CONFIG_USB_NET_AX8817X=m
    CONFIG_USB_NET_CDCETHER=m
    CONFIG_USB_NET_DM9601=m
    CONFIG_USB_NET_GL620A=m
    CONFIG_USB_NET_NET1080=m
    CONFIG_USB_NET_PLUSB=m
    CONFIG_USB_NET_MCS7830=m
    CONFIG_USB_NET_RNDIS_HOST=m
    CONFIG_USB_NET_CDC_SUBSET=m
    CONFIG_USB_ALI_M5632=y
    CONFIG_USB_AN2720=y
    CONFIG_USB_BELKIN=y
    CONFIG_USB_ARMLINUX=y
    CONFIG_USB_EPSON2888=y
    CONFIG_USB_KC2190=y
    CONFIG_USB_NET_ZAURUS=m
    # CONFIG_NET_PCMCIA is not set
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    CONFIG_PLIP=m
    CONFIG_PPP=m
    CONFIG_PPP_MULTILINK=y
    CONFIG_PPP_FILTER=y
    CONFIG_PPP_ASYNC=m
    CONFIG_PPP_SYNC_TTY=m
    CONFIG_PPP_DEFLATE=m
    CONFIG_PPP_BSDCOMP=m
    CONFIG_PPP_MPPE=m
    CONFIG_PPPOE=m
    # CONFIG_PPPOL2TP is not set
    CONFIG_SLIP=m
    CONFIG_SLIP_COMPRESSED=y
    CONFIG_SLHC=m
    CONFIG_SLIP_SMART=y
    CONFIG_SLIP_MODE_SLIP6=y
    # CONFIG_NET_FC is not set
    CONFIG_SHAPER=m
    CONFIG_NETCONSOLE=y
    CONFIG_NETCONSOLE_DYNAMIC=y
    CONFIG_NETPOLL=y
    # CONFIG_NETPOLL_TRAP is not set
    CONFIG_NET_POLL_CONTROLLER=y
    # CONFIG_ISDN is not set
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y
    CONFIG_INPUT_FF_MEMLESS=m
    CONFIG_INPUT_POLLDEV=m

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=m
    CONFIG_INPUT_EVDEV=m
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    CONFIG_KEYBOARD_SUNKBD=m
    CONFIG_KEYBOARD_LKKBD=m
    CONFIG_KEYBOARD_XTKBD=m
    CONFIG_KEYBOARD_NEWTON=m
    CONFIG_KEYBOARD_STOWAWAY=m
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=m
    CONFIG_MOUSE_PS2_ALPS=y
    CONFIG_MOUSE_PS2_LOGIPS2PP=y
    CONFIG_MOUSE_PS2_SYNAPTICS=y
    CONFIG_MOUSE_PS2_LIFEBOOK=y
    CONFIG_MOUSE_PS2_TRACKPOINT=y
    # CONFIG_MOUSE_PS2_TOUCHKIT is not set
    CONFIG_MOUSE_SERIAL=m
    CONFIG_MOUSE_APPLETOUCH=m
    CONFIG_MOUSE_INPORT=m
    # CONFIG_MOUSE_ATIXL is not set
    CONFIG_MOUSE_LOGIBM=m
    CONFIG_MOUSE_PC110PAD=m
    CONFIG_MOUSE_VSXXXAA=m
    CONFIG_INPUT_JOYSTICK=y
    CONFIG_JOYSTICK_ANALOG=m
    CONFIG_JOYSTICK_A3D=m
    CONFIG_JOYSTICK_ADI=m
    CONFIG_JOYSTICK_COBRA=m
    CONFIG_JOYSTICK_GF2K=m
    CONFIG_JOYSTICK_GRIP=m
    CONFIG_JOYSTICK_GRIP_MP=m
    CONFIG_JOYSTICK_GUILLEMOT=m
    CONFIG_JOYSTICK_INTERACT=m
    CONFIG_JOYSTICK_SIDEWINDER=m
    CONFIG_JOYSTICK_TMDC=m
    CONFIG_JOYSTICK_IFORCE=m
    CONFIG_JOYSTICK_IFORCE_USB=y
    CONFIG_JOYSTICK_IFORCE_232=y
    CONFIG_JOYSTICK_WARRIOR=m
    CONFIG_JOYSTICK_MAGELLAN=m
    CONFIG_JOYSTICK_SPACEORB=m
    CONFIG_JOYSTICK_SPACEBALL=m
    CONFIG_JOYSTICK_STINGER=m
    CONFIG_JOYSTICK_TWIDJOY=m
    CONFIG_JOYSTICK_DB9=m
    CONFIG_JOYSTICK_GAMECON=m
    CONFIG_JOYSTICK_TURBOGRAFX=m
    CONFIG_JOYSTICK_JOYDUMP=m
    CONFIG_JOYSTICK_XPAD=m
    # CONFIG_JOYSTICK_XPAD_FF is not set
    # CONFIG_JOYSTICK_XPAD_LEDS is not set
    CONFIG_INPUT_TABLET=y
    CONFIG_TABLET_USB_ACECAD=m
    CONFIG_TABLET_USB_AIPTEK=m
    CONFIG_TABLET_USB_GTCO=m
    CONFIG_TABLET_USB_KBTAB=m
    CONFIG_TABLET_USB_WACOM=m
    CONFIG_INPUT_TOUCHSCREEN=y
    # CONFIG_TOUCHSCREEN_FUJITSU is not set
    CONFIG_TOUCHSCREEN_GUNZE=m
    CONFIG_TOUCHSCREEN_ELO=m
    CONFIG_TOUCHSCREEN_MTOUCH=m
    CONFIG_TOUCHSCREEN_MK712=m
    CONFIG_TOUCHSCREEN_PENMOUNT=m
    CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
    CONFIG_TOUCHSCREEN_TOUCHWIN=m
    CONFIG_TOUCHSCREEN_UCB1400=m
    CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
    CONFIG_TOUCHSCREEN_USB_EGALAX=y
    CONFIG_TOUCHSCREEN_USB_PANJIT=y
    CONFIG_TOUCHSCREEN_USB_3M=y
    CONFIG_TOUCHSCREEN_USB_ITM=y
    CONFIG_TOUCHSCREEN_USB_ETURBO=y
    CONFIG_TOUCHSCREEN_USB_GUNZE=y
    CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
    CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
    CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
    CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
    CONFIG_TOUCHSCREEN_USB_GOTOP=y
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=m
    CONFIG_INPUT_WISTRON_BTNS=m
    CONFIG_INPUT_ATLAS_BTNS=m
    CONFIG_INPUT_ATI_REMOTE=m
    CONFIG_INPUT_ATI_REMOTE2=m
    CONFIG_INPUT_KEYSPAN_REMOTE=m
    CONFIG_INPUT_POWERMATE=m
    CONFIG_INPUT_YEALINK=m
    CONFIG_INPUT_UINPUT=m

    #
    # Hardware I/O ports
    #
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    CONFIG_SERIO_SERPORT=m
    CONFIG_SERIO_CT82C710=m
    CONFIG_SERIO_PARKBD=m
    CONFIG_SERIO_PCIPS2=m
    CONFIG_SERIO_LIBPS2=y
    CONFIG_SERIO_RAW=m
    CONFIG_GAMEPORT=m
    CONFIG_GAMEPORT_NS558=m
    CONFIG_GAMEPORT_L4=m
    CONFIG_GAMEPORT_EMU10K1=m
    CONFIG_GAMEPORT_FM801=m

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_VT_HW_CONSOLE_BINDING is not set
    CONFIG_SERIAL_NONSTANDARD=y
    # CONFIG_COMPUTONE is not set
    # CONFIG_ROCKETPORT is not set
    # CONFIG_CYCLADES is not set
    # CONFIG_DIGIEPCA is not set
    # CONFIG_ESPSERIAL is not set
    # CONFIG_MOXA_INTELLIO is not set
    # CONFIG_MOXA_SMARTIO is not set
    # CONFIG_MOXA_SMARTIO_NEW is not set
    # CONFIG_ISI is not set
    # CONFIG_SYNCLINK is not set
    # CONFIG_SYNCLINKMP is not set
    # CONFIG_SYNCLINK_GT is not set
    # CONFIG_N_HDLC is not set
    # CONFIG_SPECIALIX is not set
    # CONFIG_SX is not set
    # CONFIG_RIO is not set
    # CONFIG_STALDRV is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_FIX_EARLYCON_MEM=y
    CONFIG_SERIAL_8250_PCI=y
    CONFIG_SERIAL_8250_PNP=y
    CONFIG_SERIAL_8250_CS=m
    CONFIG_SERIAL_8250_NR_UARTS=16
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    CONFIG_SERIAL_8250_EXTENDED=y
    CONFIG_SERIAL_8250_MANY_PORTS=y
    CONFIG_SERIAL_8250_FOURPORT=m
    CONFIG_SERIAL_8250_ACCENT=m
    CONFIG_SERIAL_8250_BOCA=m
    CONFIG_SERIAL_8250_EXAR_ST16C554=m
    CONFIG_SERIAL_8250_HUB6=m
    CONFIG_SERIAL_8250_SHARE_IRQ=y
    # CONFIG_SERIAL_8250_DETECT_IRQ is not set
    CONFIG_SERIAL_8250_RSA=y

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_SERIAL_JSM=m
    CONFIG_UNIX98_PTYS=y
    # CONFIG_LEGACY_PTYS is not set
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    CONFIG_PPDEV=m
    CONFIG_IPMI_HANDLER=m
    # CONFIG_IPMI_PANIC_EVENT is not set
    CONFIG_IPMI_DEVICE_INTERFACE=m
    CONFIG_IPMI_SI=m
    CONFIG_IPMI_WATCHDOG=m
    CONFIG_IPMI_POWEROFF=m
    CONFIG_HW_RANDOM=y
    CONFIG_HW_RANDOM_INTEL=m
    CONFIG_HW_RANDOM_AMD=m
    CONFIG_HW_RANDOM_GEODE=m
    CONFIG_HW_RANDOM_VIA=m
    CONFIG_NVRAM=m
    CONFIG_RTC=m
    CONFIG_GEN_RTC=m
    CONFIG_GEN_RTC_X=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    CONFIG_APPLICOM=m
    # CONFIG_SONYPI is not set

    #
    # PCMCIA character devices
    #
    # CONFIG_SYNCLINK_CS is not set
    # CONFIG_CARDMAN_4000 is not set
    # CONFIG_CARDMAN_4040 is not set
    # CONFIG_MWAVE is not set
    # CONFIG_PC8736x_GPIO is not set
    # CONFIG_NSC_GPIO is not set
    # CONFIG_CS5535_GPIO is not set
    CONFIG_RAW_DRIVER=m
    CONFIG_MAX_RAW_DEVS=256
    CONFIG_HPET=y
    # CONFIG_HPET_RTC_IRQ is not set
    CONFIG_HPET_MMAP=y
    CONFIG_HANGCHECK_TIMER=m
    # CONFIG_TCG_TPM is not set
    CONFIG_TELCLOCK=m
    CONFIG_DEVPORT=y
    CONFIG_I2C=m
    CONFIG_I2C_BOARDINFO=y
    CONFIG_I2C_CHARDEV=m

    #
    # I2C Algorithms
    #
    CONFIG_I2C_ALGOBIT=m
    CONFIG_I2C_ALGOPCF=m
    CONFIG_I2C_ALGOPCA=m

    #
    # I2C Hardware Bus support
    #
    CONFIG_I2C_ALI1535=m
    CONFIG_I2C_ALI1563=m
    CONFIG_I2C_ALI15X3=m
    CONFIG_I2C_AMD756=m
    CONFIG_I2C_AMD756_S4882=m
    CONFIG_I2C_AMD8111=m
    CONFIG_I2C_I801=m
    CONFIG_I2C_I810=m
    CONFIG_I2C_PIIX4=m
    CONFIG_I2C_NFORCE2=m
    CONFIG_I2C_OCORES=m
    CONFIG_I2C_PARPORT=m
    CONFIG_I2C_PARPORT_LIGHT=m
    CONFIG_I2C_PROSAVAGE=m
    CONFIG_I2C_SAVAGE4=m
    CONFIG_I2C_SIMTEC=m
    CONFIG_SCx200_ACB=m
    CONFIG_I2C_SIS5595=m
    CONFIG_I2C_SIS630=m
    CONFIG_I2C_SIS96X=m
    # CONFIG_I2C_TAOS_EVM is not set
    CONFIG_I2C_STUB=m
    CONFIG_I2C_TINY_USB=m
    CONFIG_I2C_VIA=m
    CONFIG_I2C_VIAPRO=m
    CONFIG_I2C_VOODOO3=m
    CONFIG_I2C_PCA_ISA=m

    #
    # Miscellaneous I2C Chip support
    #
    CONFIG_SENSORS_DS1337=m
    CONFIG_SENSORS_DS1374=m
    # CONFIG_DS1682 is not set
    CONFIG_SENSORS_EEPROM=m
    CONFIG_SENSORS_PCF8574=m
    CONFIG_SENSORS_PCA9539=m
    CONFIG_SENSORS_PCF8591=m
    CONFIG_SENSORS_MAX6875=m
    # CONFIG_SENSORS_TSL2550 is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set

    #
    # SPI support
    #
    # CONFIG_SPI is not set
    # CONFIG_SPI_MASTER is not set
    # CONFIG_W1 is not set
    CONFIG_POWER_SUPPLY=m
    # CONFIG_POWER_SUPPLY_DEBUG is not set
    # CONFIG_PDA_POWER is not set
    # CONFIG_BATTERY_DS2760 is not set
    CONFIG_HWMON=y
    CONFIG_HWMON_VID=m
    CONFIG_SENSORS_ABITUGURU=m
    # CONFIG_SENSORS_ABITUGURU3 is not set
    CONFIG_SENSORS_AD7418=m
    CONFIG_SENSORS_ADM1021=m
    CONFIG_SENSORS_ADM1025=m
    CONFIG_SENSORS_ADM1026=m
    CONFIG_SENSORS_ADM1029=m
    CONFIG_SENSORS_ADM1031=m
    CONFIG_SENSORS_ADM9240=m
    CONFIG_SENSORS_ADT7470=m
    CONFIG_SENSORS_K8TEMP=m
    CONFIG_SENSORS_ASB100=m
    CONFIG_SENSORS_ATXP1=m
    CONFIG_SENSORS_DS1621=m
    CONFIG_SENSORS_I5K_AMB=m
    CONFIG_SENSORS_F71805F=m
    CONFIG_SENSORS_F71882FG=m
    CONFIG_SENSORS_F75375S=m
    CONFIG_SENSORS_FSCHER=m
    CONFIG_SENSORS_FSCPOS=m
    CONFIG_SENSORS_FSCHMD=m
    CONFIG_SENSORS_GL518SM=m
    CONFIG_SENSORS_GL520SM=m
    CONFIG_SENSORS_CORETEMP=m
    CONFIG_SENSORS_IBMPEX=m
    CONFIG_SENSORS_IT87=m
    CONFIG_SENSORS_LM63=m
    CONFIG_SENSORS_LM75=m
    CONFIG_SENSORS_LM77=m
    CONFIG_SENSORS_LM78=m
    CONFIG_SENSORS_LM80=m
    CONFIG_SENSORS_LM83=m
    CONFIG_SENSORS_LM85=m
    CONFIG_SENSORS_LM87=m
    CONFIG_SENSORS_LM90=m
    CONFIG_SENSORS_LM92=m
    # CONFIG_SENSORS_LM93 is not set
    CONFIG_SENSORS_MAX1619=m
    CONFIG_SENSORS_MAX6650=m
    CONFIG_SENSORS_PC87360=m
    CONFIG_SENSORS_PC87427=m
    CONFIG_SENSORS_SIS5595=m
    # CONFIG_SENSORS_DME1737 is not set
    CONFIG_SENSORS_SMSC47M1=m
    CONFIG_SENSORS_SMSC47M192=m
    CONFIG_SENSORS_SMSC47B397=m
    # CONFIG_SENSORS_THMC50 is not set
    CONFIG_SENSORS_VIA686A=m
    CONFIG_SENSORS_VT1211=m
    CONFIG_SENSORS_VT8231=m
    CONFIG_SENSORS_W83781D=m
    CONFIG_SENSORS_W83791D=m
    CONFIG_SENSORS_W83792D=m
    CONFIG_SENSORS_W83793=m
    CONFIG_SENSORS_W83L785TS=m
    CONFIG_SENSORS_W83627HF=m
    CONFIG_SENSORS_W83627EHF=m
    CONFIG_SENSORS_HDAPS=m
    CONFIG_SENSORS_APPLESMC=m
    # CONFIG_HWMON_DEBUG_CHIP is not set
    CONFIG_WATCHDOG=y
    # CONFIG_WATCHDOG_NOWAYOUT is not set

    #
    # Watchdog Device Drivers
    #
    CONFIG_SOFT_WATCHDOG=m
    CONFIG_ACQUIRE_WDT=m
    CONFIG_ADVANTECH_WDT=m
    CONFIG_ALIM1535_WDT=m
    CONFIG_ALIM7101_WDT=m
    CONFIG_SC520_WDT=m
    CONFIG_EUROTECH_WDT=m
    CONFIG_IB700_WDT=m
    CONFIG_IBMASR=m
    CONFIG_WAFER_WDT=m
    CONFIG_I6300ESB_WDT=m
    CONFIG_ITCO_WDT=m
    # CONFIG_ITCO_VENDOR_SUPPORT is not set
    # CONFIG_IT8712F_WDT is not set
    CONFIG_SC1200_WDT=m
    CONFIG_PC87413_WDT=m
    CONFIG_60XX_WDT=m
    CONFIG_SBC8360_WDT=m
    # CONFIG_SBC7240_WDT is not set
    CONFIG_CPU5_WDT=m
    CONFIG_SMSC37B787_WDT=m
    CONFIG_W83627HF_WDT=m
    CONFIG_W83697HF_WDT=m
    CONFIG_W83877F_WDT=m
    CONFIG_W83977F_WDT=m
    CONFIG_MACHZ_WDT=m
    CONFIG_SBC_EPX_C3_WATCHDOG=m

    #
    # ISA-based Watchdog Cards
    #
    CONFIG_PCWATCHDOG=m
    CONFIG_MIXCOMWD=m
    CONFIG_WDT=m
    CONFIG_WDT_501=y

    #
    # PCI-based Watchdog Cards
    #
    CONFIG_PCIPCWATCHDOG=m
    CONFIG_WDTPCI=m
    CONFIG_WDT_501_PCI=y

    #
    # USB-based Watchdog Cards
    #
    CONFIG_USBPCWATCHDOG=m

    #
    # Sonics Silicon Backplane
    #
    CONFIG_SSB_POSSIBLE=y
    # CONFIG_SSB is not set

    #
    # Multifunction device drivers
    #
    # CONFIG_MFD_SM501 is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set
    # CONFIG_DVB_CORE is not set
    # CONFIG_DAB is not set

    #
    # Graphics support
    #
    CONFIG_AGP=m
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_ATI is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    CONFIG_AGP_INTEL=m
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    CONFIG_DRM=m
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_R128 is not set
    # CONFIG_DRM_RADEON is not set
    CONFIG_DRM_I810=m
    CONFIG_DRM_I830=m
    CONFIG_DRM_I915=m
    # CONFIG_DRM_MGA is not set
    # CONFIG_DRM_SIS is not set
    # CONFIG_DRM_VIA is not set
    # CONFIG_DRM_SAVAGE is not set
    CONFIG_VGASTATE=m
    CONFIG_VIDEO_OUTPUT_CONTROL=m
    CONFIG_FB=y
    CONFIG_FIRMWARE_EDID=y
    CONFIG_FB_DDC=m
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
    # CONFIG_FB_SYS_FILLRECT is not set
    # CONFIG_FB_SYS_COPYAREA is not set
    # CONFIG_FB_SYS_IMAGEBLIT is not set
    # CONFIG_FB_SYS_FOPS is not set
    CONFIG_FB_DEFERRED_IO=y
    # CONFIG_FB_SVGALIB is not set
    # CONFIG_FB_MACMODES is not set
    # CONFIG_FB_BACKLIGHT is not set
    CONFIG_FB_MODE_HELPERS=y
    CONFIG_FB_TILEBLITTING=y

    #
    # Frame buffer hardware drivers
    #
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ARC is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    CONFIG_FB_VGA16=m
    # CONFIG_FB_UVESA is not set
    CONFIG_FB_VESA=y
    # CONFIG_FB_EFI is not set
    # CONFIG_FB_IMAC is not set
    # CONFIG_FB_HECUBA is not set
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_S1D13XXX is not set
    # CONFIG_FB_NVIDIA is not set
    # CONFIG_FB_RIVA is not set
    CONFIG_FB_I810=m
    # CONFIG_FB_I810_GTF is not set
    # CONFIG_FB_LE80578 is not set
    CONFIG_FB_INTEL=m
    # CONFIG_FB_INTEL_DEBUG is not set
    CONFIG_FB_INTEL_I2C=y
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_S3 is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_VT8623 is not set
    # CONFIG_FB_CYBLA is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_ARK is not set
    # CONFIG_FB_PM3 is not set
    # CONFIG_FB_GEODE is not set
    # CONFIG_FB_VIRTUAL is not set
    CONFIG_BACKLIGHT_LCD_SUPPORT=y
    # CONFIG_LCD_CLASS_DEVICE is not set
    CONFIG_BACKLIGHT_CLASS_DEVICE=y
    # CONFIG_BACKLIGHT_CORGI is not set
    CONFIG_BACKLIGHT_PROGEAR=m

    #
    # Display device support
    #
    CONFIG_DISPLAY_SUPPORT=m

    #
    # Display hardware drivers
    #

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_VGACON_SOFT_SCROLLBACK is not set
    CONFIG_VIDEO_SELECT=y
    CONFIG_MDA_CONSOLE=m
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
    CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
    # CONFIG_FONTS is not set
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y
    # CONFIG_LOGO is not set

    #
    # Sound
    #
    CONFIG_SOUND=m

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=m
    CONFIG_SND_TIMER=m
    CONFIG_SND_PCM=m
    CONFIG_SND_RAWMIDI=m
    CONFIG_SND_SEQUENCER=m
    CONFIG_SND_SEQ_DUMMY=m
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_PCM_OSS_PLUGINS=y
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_RTCTIMER=m
    CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
    # CONFIG_SND_DYNAMIC_MINORS is not set
    CONFIG_SND_SUPPORT_OLD_API=y
    CONFIG_SND_VERBOSE_PROCFS=y
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    CONFIG_SND_MPU401_UART=m
    CONFIG_SND_AC97_CODEC=m
    CONFIG_SND_DUMMY=m
    CONFIG_SND_VIRMIDI=m
    CONFIG_SND_MTPAV=m
    CONFIG_SND_MTS64=m
    CONFIG_SND_SERIAL_U16550=m
    CONFIG_SND_MPU401=m
    CONFIG_SND_PORTMAN2X4=m

    #
    # ISA devices
    #
    # CONFIG_SND_ADLIB is not set
    # CONFIG_SND_AD1816A is not set
    # CONFIG_SND_AD1848 is not set
    # CONFIG_SND_ALS100 is not set
    # CONFIG_SND_AZT2320 is not set
    # CONFIG_SND_CMI8330 is not set
    # CONFIG_SND_CS4231 is not set
    # CONFIG_SND_CS4232 is not set
    # CONFIG_SND_CS4236 is not set
    # CONFIG_SND_DT019X is not set
    # CONFIG_SND_ES968 is not set
    # CONFIG_SND_ES1688 is not set
    # CONFIG_SND_ES18XX is not set
    # CONFIG_SND_SC6000 is not set
    # CONFIG_SND_GUSCLASSIC is not set
    # CONFIG_SND_GUSEXTREME is not set
    # CONFIG_SND_GUSMAX is not set
    # CONFIG_SND_INTERWAVE is not set
    # CONFIG_SND_INTERWAVE_STB is not set
    # CONFIG_SND_OPL3SA2 is not set
    # CONFIG_SND_OPTI92X_AD1848 is not set
    # CONFIG_SND_OPTI92X_CS4231 is not set
    # CONFIG_SND_OPTI93X is not set
    # CONFIG_SND_MIRO is not set
    # CONFIG_SND_SB8 is not set
    # CONFIG_SND_SB16 is not set
    # CONFIG_SND_SBAWE is not set
    # CONFIG_SND_SGALAXY is not set
    # CONFIG_SND_SSCAPE is not set
    # CONFIG_SND_WAVEFRONT is not set

    #
    # PCI devices
    #
    # CONFIG_SND_AD1889 is not set
    # CONFIG_SND_ALS300 is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS5530 is not set
    # CONFIG_SND_CS5535AUDIO is not set
    # CONFIG_SND_DARLA20 is not set
    # CONFIG_SND_GINA20 is not set
    # CONFIG_SND_LAYLA20 is not set
    # CONFIG_SND_DARLA24 is not set
    # CONFIG_SND_GINA24 is not set
    # CONFIG_SND_LAYLA24 is not set
    # CONFIG_SND_MONA is not set
    # CONFIG_SND_MIA is not set
    # CONFIG_SND_ECHO3G is not set
    # CONFIG_SND_INDIGO is not set
    # CONFIG_SND_INDIGOIO is not set
    # CONFIG_SND_INDIGODJ is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_HDA_INTEL is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_HDSPM is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    CONFIG_SND_INTEL8X0=m
    CONFIG_SND_INTEL8X0M=m
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_PCXHR is not set
    # CONFIG_SND_RIPTIDE is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VIA82XX_MODEM is not set
    # CONFIG_SND_VX222 is not set
    # CONFIG_SND_YMFPCI is not set
    CONFIG_SND_AC97_POWER_SAVE=y
    CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

    #
    # USB devices
    #
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set
    # CONFIG_SND_USB_CAIAQ is not set

    #
    # PCMCIA devices
    #
    # CONFIG_SND_VXPOCKET is not set
    # CONFIG_SND_PDAUDIOCF is not set

    #
    # System on Chip audio support
    #
    # CONFIG_SND_SOC is not set

    #
    # SoC Audio support for SuperH
    #

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set
    CONFIG_AC97_BUS=m
    CONFIG_HID_SUPPORT=y
    CONFIG_HID=m
    # CONFIG_HID_DEBUG is not set
    # CONFIG_HIDRAW is not set

    #
    # USB Input Devices
    #
    CONFIG_USB_HID=m
    CONFIG_USB_HIDINPUT_POWERBOOK=y
    # CONFIG_HID_FF is not set
    CONFIG_USB_HIDDEV=y

    #
    # USB HID Boot Protocol drivers
    #
    CONFIG_USB_KBD=m
    CONFIG_USB_MOUSE=m
    CONFIG_USB_SUPPORT=y
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB_ARCH_HAS_EHCI=y
    CONFIG_USB=m
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_DEVICE_CLASS=y
    # CONFIG_USB_DYNAMIC_MINORS is not set
    CONFIG_USB_SUSPEND=y
    # CONFIG_USB_PERSIST is not set
    # CONFIG_USB_OTG is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=m
    CONFIG_USB_EHCI_SPLIT_ISO=y
    CONFIG_USB_EHCI_ROOT_HUB_TT=y
    # CONFIG_USB_EHCI_TT_NEWSCHED is not set
    # CONFIG_USB_ISP116X_HCD is not set
    CONFIG_USB_OHCI_HCD=m
    # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
    # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
    CONFIG_USB_OHCI_LITTLE_ENDIAN=y
    CONFIG_USB_UHCI_HCD=m
    # CONFIG_USB_SL811_HCD is not set
    # CONFIG_USB_R8A66597_HCD is not set

    #
    # USB Device Class drivers
    #
    # CONFIG_USB_ACM is not set
    CONFIG_USB_PRINTER=m

    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    #

    #
    # may also be needed; see USB_STORAGE Help for more information
    #
    # CONFIG_USB_STORAGE is not set
    # CONFIG_USB_LIBUSUAL is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set
    CONFIG_USB_MON=y

    #
    # USB port drivers
    #
    CONFIG_USB_USS720=m

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_ADUTUX is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_BERRY_CHARGE is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYPRESS_CY7C63 is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGET is not set
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_FTDI_ELAN is not set
    # CONFIG_USB_APPLEDISPLAY is not set
    # CONFIG_USB_SISUSBVGA is not set
    # CONFIG_USB_LD is not set
    # CONFIG_USB_TRANCEVIBRATOR is not set
    # CONFIG_USB_IOWARRIOR is not set
    # CONFIG_USB_TEST is not set

    #
    # USB DSL modem support
    #

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set
    # CONFIG_MMC is not set
    CONFIG_NEW_LEDS=y
    CONFIG_LEDS_CLASS=m

    #
    # LED drivers
    #

    #
    # LED Triggers
    #
    # CONFIG_LEDS_TRIGGERS is not set
    # CONFIG_INFINIBAND is not set
    # CONFIG_EDAC is not set
    CONFIG_RTC_LIB=m
    CONFIG_RTC_CLASS=m

    #
    # RTC interfaces
    #
    CONFIG_RTC_INTF_SYSFS=y
    CONFIG_RTC_INTF_PROC=y
    CONFIG_RTC_INTF_DEV=y
    # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
    # CONFIG_RTC_DRV_TEST is not set

    #
    # I2C RTC drivers
    #
    CONFIG_RTC_DRV_DS1307=m
    CONFIG_RTC_DRV_DS1374=m
    CONFIG_RTC_DRV_DS1672=m
    CONFIG_RTC_DRV_MAX6900=m
    CONFIG_RTC_DRV_RS5C372=m
    CONFIG_RTC_DRV_ISL1208=m
    CONFIG_RTC_DRV_X1205=m
    CONFIG_RTC_DRV_PCF8563=m
    CONFIG_RTC_DRV_PCF8583=m
    # CONFIG_RTC_DRV_M41T80 is not set

    #
    # SPI RTC drivers
    #

    #
    # Platform RTC drivers
    #
    CONFIG_RTC_DRV_CMOS=m
    CONFIG_RTC_DRV_DS1553=m
    # CONFIG_RTC_DRV_STK17TA8 is not set
    CONFIG_RTC_DRV_DS1742=m
    CONFIG_RTC_DRV_M48T86=m
    # CONFIG_RTC_DRV_M48T59 is not set
    CONFIG_RTC_DRV_V3020=m

    #
    # on-CPU RTC drivers
    #
    # CONFIG_DMADEVICES is not set
    # CONFIG_AUXDISPLAY is not set
    # CONFIG_VIRTUALIZATION is not set

    #
    # Userspace I/O
    #
    # CONFIG_UIO is not set

    #
    # Firmware Drivers
    #
    CONFIG_EDD=m
    CONFIG_EFI_VARS=m
    CONFIG_DELL_RBU=m
    CONFIG_DCDBAS=m
    CONFIG_DMIID=y

    #
    # File systems
    #
    CONFIG_EXT2_FS=m
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    # CONFIG_EXT2_FS_XIP is not set
    CONFIG_EXT3_FS=m
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    # CONFIG_EXT4DEV_FS is not set
    CONFIG_JBD=m
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=m
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    CONFIG_FS_POSIX_ACL=y
    # CONFIG_XFS_FS is not set
    # CONFIG_GFS2_FS is not set
    # CONFIG_OCFS2_FS is not set
    # CONFIG_MINIX_FS is not set
    CONFIG_ROMFS_FS=m
    CONFIG_INOTIFY=y
    CONFIG_INOTIFY_USER=y
    CONFIG_QUOTA=y
    # CONFIG_QUOTA_NETLINK_INTERFACE is not set
    CONFIG_PRINT_QUOTA_WARNING=y
    CONFIG_QFMT_V1=m
    CONFIG_QFMT_V2=m
    CONFIG_QUOTACTL=y
    CONFIG_DNOTIFY=y
    CONFIG_AUTOFS_FS=m
    CONFIG_AUTOFS4_FS=m
    CONFIG_FUSE_FS=m
    CONFIG_GENERIC_ACL=y

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=m
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_UDF_FS=m
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=m
    # CONFIG_NTFS_DEBUG is not set
    CONFIG_NTFS_RW=y

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_PROC_SYSCTL=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    CONFIG_TMPFS_POSIX_ACL=y
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_CONFIGFS_FS=y

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_ECRYPT_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_JFFS2_FS is not set
    CONFIG_CRAMFS=y
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set
    CONFIG_NETWORK_FILESYSTEMS=y
    CONFIG_NFS_FS=m
    CONFIG_NFS_V3=y
    CONFIG_NFS_V3_ACL=y
    CONFIG_NFS_V4=y
    CONFIG_NFS_DIRECTIO=y
    # CONFIG_NFSD is not set
    CONFIG_LOCKD=m
    CONFIG_LOCKD_V4=y
    CONFIG_NFS_ACL_SUPPORT=m
    CONFIG_NFS_COMMON=y
    CONFIG_SUNRPC=m
    CONFIG_SUNRPC_GSS=m
    CONFIG_SUNRPC_BIND34=y
    CONFIG_RPCSEC_GSS_KRB5=m
    CONFIG_RPCSEC_GSS_SPKM3=m
    CONFIG_SMB_FS=m
    # CONFIG_SMB_NLS_DEFAULT is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    # CONFIG_MAC_PARTITION is not set
    CONFIG_MSDOS_PARTITION=y
    CONFIG_BSD_DISKLABEL=y
    CONFIG_MINIX_SUBPARTITION=y
    CONFIG_SOLARIS_X86_PARTITION=y
    CONFIG_UNIXWARE_DISKLABEL=y
    CONFIG_LDM_PARTITION=y
    # CONFIG_LDM_DEBUG is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    # CONFIG_KARMA_PARTITION is not set
    # CONFIG_EFI_PARTITION is not set
    # CONFIG_SYSV68_PARTITION is not set
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=m
    CONFIG_NLS_CODEPAGE_737=m
    CONFIG_NLS_CODEPAGE_775=m
    CONFIG_NLS_CODEPAGE_850=m
    CONFIG_NLS_CODEPAGE_852=m
    CONFIG_NLS_CODEPAGE_855=m
    CONFIG_NLS_CODEPAGE_857=m
    CONFIG_NLS_CODEPAGE_860=m
    CONFIG_NLS_CODEPAGE_861=m
    CONFIG_NLS_CODEPAGE_862=m
    CONFIG_NLS_CODEPAGE_863=m
    CONFIG_NLS_CODEPAGE_864=m
    CONFIG_NLS_CODEPAGE_865=m
    CONFIG_NLS_CODEPAGE_866=m
    CONFIG_NLS_CODEPAGE_869=m
    CONFIG_NLS_CODEPAGE_936=m
    CONFIG_NLS_CODEPAGE_950=m
    CONFIG_NLS_CODEPAGE_932=m
    CONFIG_NLS_CODEPAGE_949=m
    CONFIG_NLS_CODEPAGE_874=m
    CONFIG_NLS_ISO8859_8=m
    CONFIG_NLS_CODEPAGE_1250=m
    CONFIG_NLS_CODEPAGE_1251=m
    CONFIG_NLS_ASCII=m
    CONFIG_NLS_ISO8859_1=m
    CONFIG_NLS_ISO8859_2=m
    CONFIG_NLS_ISO8859_3=m
    CONFIG_NLS_ISO8859_4=m
    CONFIG_NLS_ISO8859_5=m
    CONFIG_NLS_ISO8859_6=m
    CONFIG_NLS_ISO8859_7=m
    CONFIG_NLS_ISO8859_9=m
    CONFIG_NLS_ISO8859_13=m
    CONFIG_NLS_ISO8859_14=m
    CONFIG_NLS_ISO8859_15=m
    CONFIG_NLS_KOI8_R=m
    CONFIG_NLS_KOI8_U=m
    CONFIG_NLS_UTF8=m
    CONFIG_DLM=m
    CONFIG_DLM_DEBUG=y
    CONFIG_INSTRUMENTATION=y
    # CONFIG_PROFILING is not set
    # CONFIG_KPROBES is not set
    # CONFIG_MARKERS is not set

    #
    # Kernel hacking
    #
    CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    # CONFIG_PRINTK_TIME is not set
    CONFIG_ENABLE_WARN_DEPRECATED=y
    CONFIG_ENABLE_MUST_CHECK=y
    CONFIG_MAGIC_SYSRQ=y
    CONFIG_UNUSED_SYMBOLS=y
    CONFIG_DEBUG_FS=y
    # CONFIG_HEADERS_CHECK is not set
    CONFIG_DEBUG_KERNEL=y
    # CONFIG_DEBUG_SHIRQ is not set
    CONFIG_DETECT_SOFTLOCKUP=y
    CONFIG_SCHED_DEBUG=y
    # CONFIG_SCHEDSTATS is not set
    CONFIG_TIMER_STATS=y
    # CONFIG_DEBUG_SLAB is not set
    # CONFIG_DEBUG_RT_MUTEXES is not set
    # CONFIG_RT_MUTEX_TESTER is not set
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_MUTEXES is not set
    # CONFIG_DEBUG_LOCK_ALLOC is not set
    # CONFIG_PROVE_LOCKING is not set
    # CONFIG_LOCK_STAT is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
    # CONFIG_DEBUG_KOBJECT is not set
    # CONFIG_DEBUG_HIGHMEM is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    # CONFIG_DEBUG_INFO is not set
    # CONFIG_DEBUG_VM is not set
    # CONFIG_DEBUG_LIST is not set
    # CONFIG_DEBUG_SG is not set
    # CONFIG_FRAME_POINTER is not set
    # CONFIG_FORCED_INLINING is not set
    # CONFIG_BOOT_PRINTK_DELAY is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_FAULT_INJECTION is not set
    # CONFIG_SAMPLES is not set
    CONFIG_EARLY_PRINTK=y
    # CONFIG_DEBUG_STACKOVERFLOW is not set
    # CONFIG_DEBUG_STACK_USAGE is not set

    #
    # Page alloc debug is incompatible with Software Suspend on i386
    #
    # CONFIG_DEBUG_RODATA is not set
    # CONFIG_4KSTACKS is not set
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    CONFIG_DOUBLEFAULT=y

    #
    # Security options
    #
    CONFIG_KEYS=y
    # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
    CONFIG_SECURITY=y
    CONFIG_SECURITY_NETWORK=y
    CONFIG_SECURITY_NETWORK_XFRM=y
    CONFIG_SECURITY_CAPABILITIES=y
    # CONFIG_SECURITY_FILE_CAPABILITIES is not set
    CONFIG_SECURITY_SELINUX=y
    CONFIG_SECURITY_SELINUX_BOOTPARAM=y
    CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
    CONFIG_SECURITY_SELINUX_DISABLE=y
    CONFIG_SECURITY_SELINUX_DEVELOP=y
    CONFIG_SECURITY_SELINUX_AVC_STATS=y
    CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
    # CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
    # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
    CONFIG_XOR_BLOCKS=m
    CONFIG_ASYNC_CORE=m
    CONFIG_ASYNC_MEMCPY=m
    CONFIG_ASYNC_XOR=m
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_ALGAPI=y
    CONFIG_CRYPTO_AEAD=m
    CONFIG_CRYPTO_BLKCIPHER=m
    CONFIG_CRYPTO_HASH=y
    CONFIG_CRYPTO_MANAGER=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_XCBC=m
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=y
    CONFIG_CRYPTO_SHA1=m
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_WP512=m
    CONFIG_CRYPTO_TGR192=m
    CONFIG_CRYPTO_GF128MUL=m
    CONFIG_CRYPTO_ECB=m
    CONFIG_CRYPTO_CBC=m
    CONFIG_CRYPTO_PCBC=m
    CONFIG_CRYPTO_LRW=m
    CONFIG_CRYPTO_XTS=m
    # CONFIG_CRYPTO_CRYPTD is not set
    CONFIG_CRYPTO_DES=m
    CONFIG_CRYPTO_FCRYPT=m
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_TWOFISH_COMMON=m
    CONFIG_CRYPTO_TWOFISH_586=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES=m
    CONFIG_CRYPTO_AES_586=m
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    CONFIG_CRYPTO_TEA=m
    CONFIG_CRYPTO_ARC4=m
    CONFIG_CRYPTO_KHAZAD=m
    CONFIG_CRYPTO_ANUBIS=m
    CONFIG_CRYPTO_SEED=m
    CONFIG_CRYPTO_DEFLATE=m
    CONFIG_CRYPTO_MICHAEL_MIC=m
    CONFIG_CRYPTO_CRC32C=m
    CONFIG_CRYPTO_CAMELLIA=m
    CONFIG_CRYPTO_TEST=m
    CONFIG_CRYPTO_AUTHENC=m
    CONFIG_CRYPTO_HW=y
    CONFIG_CRYPTO_DEV_PADLOCK=m
    CONFIG_CRYPTO_DEV_PADLOCK_AES=m
    CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
    CONFIG_CRYPTO_DEV_GEODE=m

    #
    # Library routines
    #
    CONFIG_BITREVERSE=y
    CONFIG_CRC_CCITT=m
    CONFIG_CRC16=m
    CONFIG_CRC_ITU_T=m
    CONFIG_CRC32=y
    # CONFIG_CRC7 is not set
    CONFIG_LIBCRC32C=m
    CONFIG_AUDIT_GENERIC=y
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_REED_SOLOMON=m
    CONFIG_REED_SOLOMON_DEC16=y
    CONFIG_TEXTSEARCH=y
    CONFIG_TEXTSEARCH_KMP=m
    CONFIG_TEXTSEARCH_BM=m
    CONFIG_TEXTSEARCH_FSM=m
    CONFIG_PLIST=y
    CONFIG_HAS_IOMEM=y
    CONFIG_HAS_IOPORT=y
    CONFIG_HAS_DMA=y
    CONFIG_CHECK_SIGNATURE=y


  2. Re: pnpacpi: exceeded the max number of IO resources: 24

    (Adding the kernel list back. Any reason you did not send the reply there?)

    Sorry for the late reply: Christmas, New Year, the flue, etc.

    On Friday 28 December 2007, Zhao Yakui wrote:
    > On Mon, 2007-12-24 at 06:12 +0100, Frans Pop wrote:
    > > During boot with v2.6.24-rc6-125-g5356f66 on my Toshiba Satellite A40
    > > laptop, I suddenly get the following message (repeated 22 times!):
    > > pnpacpi: exceeded the max number of IO resources: 24
    > >
    > > Last time I tested 2.6.24 on that box was after the initial merge, but
    > > before -rc1. Then those lines were not present.
    > >
    > > Looks like the messages originate from a7839e96 by Zhao Yakui and that
    > > patch just adds the kernel messages so it was probably a hidden issue
    > > before, but I cannot determine if I should be worried or not.

    >
    > Thanks for caring this problem.


    And thank you for the reply, although I must admit that I'm still confused.

    > In the patch of a7839e96 the predefined PNP constant is changed. For
    > example: IO is changed from 8 to 24, Mem is changed from 4 to 12.
    > That means that more resources will be obtained from the PNP device
    > defined in ACPI table. So the system will print more message.


    OK. The change for Mem from 4 to 12 could explain the extra "iomem range"
    messages (although I don't quite understand why resources that "could not
    be reserved" still use a slot).
    I do not yet see how the "ioport range" messages increased from 0 to 16 is
    explained, but I'm not too worried about that.

    > At the same time another problem maybe happens. If the number of
    > resources defined in BIOS still exceeds the predefined PNP constant, it
    > will report that pnpacpi: exceeded the max number of IO resources: 24.
    > Although it can be fixed by changed the pnp constant bigger, it is
    > inappropriate because it will waste a lot of memory in most cases.
    >
    > Of course the above error message is harmless.


    Are the _errors_ really harmless?

    Your commit message was:
    "It brings that some resources can't be reserved and resource confilicts.
    This will cause PCI resources are assigned wrongly in some systems, and
    cause hang. This is a regression since we deleted ACPI motherboard driver
    and use PNP system driver."

    That text seems to indicate that not reserving the remaining resources _can_
    cause real problems. Do we know what PCI resources are now not being
    correctly reserved on my laptop (and other machines)? The fact that the
    message is repeated 22 times seems to indicate that in my case quite a lot
    of resources are being ignored.

    Should the memory allocation maybe be made dynamic instead of static if the
    memory waste is really such a problem? Apparently the number of PCI
    resources can vary wildly from one machine to another.

    If the error messages really are harmless, shouldn't they be changed from
    ERR to DEBUG? As it is, the messages are extremely ugly and will probably
    cause a lot of people to file bug reports as it _looks_ like there is an
    error.

    Cheers,
    Frans Pop
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  3. Re: pnpacpi: exceeded the max number of IO resources: 24

    (Mail below was sent to me privately, forwarding to the lists.)

    On Mon, 2008-01-07 at 00:48 +0100, Frans Pop wrote:
    > (Adding the kernel list back. Any reason you did not send the reply
    > there?)
    >
    > Sorry for the late reply: Christmas, New Year, the flue, etc.


    > Thank you for caring this problem.


    > On Friday 28 December 2007, Zhao Yakui wrote:
    > > On Mon, 2007-12-24 at 06:12 +0100, Frans Pop wrote:
    > > > During boot with v2.6.24-rc6-125-g5356f66 on my Toshiba Satellite
    > > > A40 laptop, I suddenly get the following message (repeated 22
    > > > times!): pnpacpi: exceeded the max number of IO resources: 24
    > > >
    > > > Last time I tested 2.6.24 on that box was after the initial merge,
    > > > but before -rc1. Then those lines were not present.
    > > >
    > > > Looks like the messages originate from a7839e96 by Zhao Yakui and
    > > > that patch just adds the kernel messages so it was probably a
    > > > hidden issue before, but I cannot determine if I should be worried
    > > > or not.

    > >
    > > Thanks for caring this problem.

    >
    > And thank you for the reply, although I must admit that I'm still
    > confused.
    >
    > > In the patch of a7839e96 the predefined PNP constant is changed. For
    > > example: IO is changed from 8 to 24, Mem is changed from 4 to 12.
    > > That means that more resources will be obtained from the PNP device
    > > defined in ACPI table. So the system will print more message.

    >
    > OK. The change for Mem from 4 to 12 could explain the extra "iomem
    > range" messages (although I don't quite understand why resources that
    > "could not be reserved" still use a slot).


    The resources of PNP device are obtained by calling the _CRS method.
    Maybe some resources has been reserved. For example: Some system will
    reserve the following resources.
    BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
    BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
    So the system will report that some resources can't be reserved.

    > I do not yet see how the "ioport range" messages increased from 0 to 16
    > is explained, but I'm not too worried about that.
    >
    > > At the same time another problem maybe happens. If the number of
    > > resources defined in BIOS still exceeds the predefined PNP constant,
    > > it will report that pnpacpi: exceeded the max number of IO resources:
    > > 24. Although it can be fixed by changed the pnp constant bigger, it
    > > is inappropriate because it will waste a lot of memory in most cases.
    > >
    > > Of course the above error message is harmless.

    >
    > Are the _errors_ really harmless?


    The error message is harmless. It only tells us that the resource
    definition of PNP device exceeds the predefined PNP constant and maybe
    there will be potential problem if some important resources can't be
    reserved. For example about 90 IOPORT resources are defined in some PNP
    device. So it will print the message. Of course it is more appropriate
    to change the message level from ERR to DEBUG.

    > Your commit message was:
    > "It brings that some resources can't be reserved and resource
    > confilicts. This will cause PCI resources are assigned wrongly in some
    > systems, and cause hang. This is a regression since we deleted ACPI
    > motherboard driver and use PNP system driver."
    >
    > That text seems to indicate that not reserving the remaining resources
    > _can_ cause real problems. Do we know what PCI resources are now not
    > being correctly reserved on my laptop (and other machines)? The fact
    > that the message is repeated 22 times seems to indicate that in my case
    > quite a lot of resources are being ignored.
    >
    > Should the memory allocation maybe be made dynamic instead of static if
    > the memory waste is really such a problem? Apparently the number of PCI
    > resources can vary wildly from one machine to another.


    It is more appropriate to use dynamic memory allocation for Pnp device
    than to increase the PNP constant bigger. Now Thomas is working on it.
    Maybe he will submit the patch very soon.

    > If the error messages really are harmless, shouldn't they be changed
    > from ERR to DEBUG? As it is, the messages are extremely ugly and will
    > probably cause a lot of people to file bug reports as it _looks_ like
    > there is an error.

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  4. Re: pnpacpi: exceeded the max number of IO resources: 24

    On Mon, 2008-01-07 at 00:48 +0100, Frans Pop wrote:
    > (Adding the kernel list back. Any reason you did not send the reply there?)
    >
    > Sorry for the late reply: Christmas, New Year, the flue, etc.

    Thank you for caring this problem.
    >
    > On Friday 28 December 2007, Zhao Yakui wrote:
    > > On Mon, 2007-12-24 at 06:12 +0100, Frans Pop wrote:
    > > > During boot with v2.6.24-rc6-125-g5356f66 on my Toshiba Satellite A40
    > > > laptop, I suddenly get the following message (repeated 22 times!):
    > > > pnpacpi: exceeded the max number of IO resources: 24
    > > >
    > > > Last time I tested 2.6.24 on that box was after the initial merge, but
    > > > before -rc1. Then those lines were not present.
    > > >
    > > > Looks like the messages originate from a7839e96 by Zhao Yakui and that
    > > > patch just adds the kernel messages so it was probably a hidden issue
    > > > before, but I cannot determine if I should be worried or not.

    > >
    > > Thanks for caring this problem.

    >
    > And thank you for the reply, although I must admit that I'm still confused.
    >
    > > In the patch of a7839e96 the predefined PNP constant is changed. For
    > > example: IO is changed from 8 to 24, Mem is changed from 4 to 12.
    > > That means that more resources will be obtained from the PNP device
    > > defined in ACPI table. So the system will print more message.

    >
    > OK. The change for Mem from 4 to 12 could explain the extra "iomem range"
    > messages (although I don't quite understand why resources that "could not
    > be reserved" still use a slot).

    The resources of PNP device are obtained by calling the _CRS method.
    Maybe some resources has been reserved. For example: Some system will
    reserve the following resources.
    BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
    BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
    So the system will report that some resources can't be reserved.

    > I do not yet see how the "ioport range" messages increased from 0 to 16 is
    > explained, but I'm not too worried about that.
    >
    > > At the same time another problem maybe happens. If the number of
    > > resources defined in BIOS still exceeds the predefined PNP constant, it
    > > will report that pnpacpi: exceeded the max number of IO resources: 24.
    > > Although it can be fixed by changed the pnp constant bigger, it is
    > > inappropriate because it will waste a lot of memory in most cases.
    > >
    > > Of course the above error message is harmless.

    >
    > Are the _errors_ really harmless?

    The error message is harmless. It only tells us that the resource
    definition of PNP device exceeds the predefined PNP constant and maybe
    there will be potential problem if some important resources can't be
    reserved. For example about 90 IOPORT resources are defined in some PNP
    device. So it will print the message. Of course it is more appropriate
    to change the message level from ERR to DEBUG.
    > Your commit message was:
    > "It brings that some resources can't be reserved and resource confilicts.
    > This will cause PCI resources are assigned wrongly in some systems, and
    > cause hang. This is a regression since we deleted ACPI motherboard driver
    > and use PNP system driver."
    >
    > That text seems to indicate that not reserving the remaining resources _can_
    > cause real problems. Do we know what PCI resources are now not being
    > correctly reserved on my laptop (and other machines)? The fact that the
    > message is repeated 22 times seems to indicate that in my case quite a lot
    > of resources are being ignored.
    >
    > Should the memory allocation maybe be made dynamic instead of static if the
    > memory waste is really such a problem? Apparently the number of PCI
    > resources can vary wildly from one machine to another.
    >

    It is more appropriate to use dynamic memory allocation for Pnp device
    than to increase the PNP constant bigger. Now Thomas is working on it.
    Maybe he will submit the patch very soon.
    > If the error messages really are harmless, shouldn't they be changed from
    > ERR to DEBUG? As it is, the messages are extremely ugly and will probably
    > cause a lot of people to file bug reports as it _looks_ like there is an
    > error.


    >
    > Cheers,
    > Frans Pop



    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  5. Re: pnpacpi: exceeded the max number of IO resources: 24

    On Mon, 07 Jan 2008 13:07:28 +0800, Zhao Yakui said:

    > The resources of PNP device are obtained by calling the _CRS method.
    > Maybe some resources has been reserved. For example: Some system will
    > reserve the following resources.
    > BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
    > BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
    > So the system will report that some resources can't be reserved.

    ....
    > The error message is harmless. It only tells us that the resource
    > definition of PNP device exceeds the predefined PNP constant and maybe
    > there will be potential problem if some important resources can't be
    > reserved. For example about 90 IOPORT resources are defined in some PNP
    > device. So it will print the message. Of course it is more appropriate
    > to change the message level from ERR to DEBUG.


    Is it possible to add some cookie crumbs to the currently non-informative
    message - things like "what address range", "what PNP devices' _CRS was
    asking for it", and so on?



    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.8 (GNU/Linux)
    Comment: Exmh version 2.5 07/13/2001

    iD8DBQFHgpp4cC3lWbTT17ARAlaVAKCIG+iyWB0Oibca8zc6Tc uvaW/RywCgnFG7
    d4m/t/CHsF554T1Kr/nfNHI=
    =gzmH
    -----END PGP SIGNATURE-----


+ Reply to Thread