Yes, the card is set to forced 100/full in NMMGR. Very frustrating. It's got to be a setting in NMMGR that I'm just missing (or have forgotten afterall these years).


Steve Davidek
Operations & Systems Administrator
City of Sparks, Nevada
775.353.1671
sdavidek@cityofsparks.us


-----Original Message-----
From: mark@pro3k.com [mailto:mark@pro3k.com]
Sent: Monday, October 20, 2008 7:00 AM
To: Davidek, Steve; HP3000-L@RAVEN.UTC.EDU
Cc: mark@pro3k.com
Subject: Re: [HP3000-L] Slow printing

Steve,

I know you meantioned that the switch was set to be forced full
duplex and 100Mb/sec, but is the HP3000 set that way in NMMGR LINK
configuration?

Mark Ranft
(612) 804-2774
mark@pro3k.com

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

Davidek, Steve wrote:
> Yes, the card is set to forced 100/full in NMMGR. Very frustrating. It's got to be a setting in NMMGR that I'm just missing (or have forgotten after all these years).

What about the printer? Is it an older half-duplex 10Mbps JetDirect?
Does you network switch match it's port in speed/duplex?

Jeff

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

Steve,

In order to 'see' how the HP3000 is set,

:LINKCONTROL @,a

-Craig

--- On Mon, 10/20/08, Mark Ranft wrote:
From: Mark Ranft
Subject: Re: Slow printing
To: HP3000-L@RAVEN.UTC.EDU
Date: Monday, October 20, 2008, 8:59 AM

Steve,

I know you meantioned that the switch was set to be forced full
duplex and 100Mb/sec, but is the HP3000 set that way in NMMGR LINK
configuration?

Mark Ranft
(612) 804-2774
mark@pro3k.com

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

Here is the screen shot of my linkcontrol. Anyone see anything I've missed? What is happening is that for example, while printing paychecks, about 20 print, pause for 2 minutes or so and print more. Reports sometimes are fast. Mostly print, pause, print...

Steve

9:41 AM : linkcontrol @,a
Linkname: DTSLINK Linktype: HP-PB IEEE8023 Linkstate: CONNECTED
Physical Path: 10/4/0
Current Station Address: 08-00-09-7B-4E-BB
Default Station Address: 08-00-09-7B-4E-BB
Current Receive Filter: broad(1) any(0) k_pckts(1) x_pckts(0)
Current Multicast Addresses:
09-00-09-00-00-01 09-00-09-00-00-03 09-00-09-00-00-04
09-00-09-00-00-06
Transmits no error 0 Receives no error 0
Transmit byte count 0 Receive byte count 0
Transmits error 0 Receives error 0
Transmits deferred 0 Carrier losses 0
Transmits 1 retry 0 CRC errors 0
Transmits >1 retry 0 Frame losses 0
Trans 16 collisions 0 Whole byte errors 0
Trans late collision 0 Size range errors 0
802 chip restarts 0 Receives dropped 0
Heartbeat losses 0 Receives broadcast 0
Receives multicast 0

Linkname: LANLINK Linktype: HP-PB 100BT Linkstate: CONNECTED
Physical Path: 10/4/4
Current Station Address: 08-00-09-DA-00-72
Default Station Address: 08-00-09-DA-00-72
Current Multicast Addresses:
09-00-09-00-00-01

Transmit bytes 276074 Receive bytes 2349353
Transmits 1465 Receives 805
Transmits no error 1465 Receives broadcast 28045
Transmits dropped 0 Receives multicast 9
Transmits deferred 0 Receives no error 30273
Transmits 1 retry 0 CRC or Maxsize error 0
Transmits >1 retry 0 Code or Align error 0
Trans 16 collisions 0 Recv dropped: addr 1385
Trans late collision 0 Recv dropped: buffer 0
Trans underruns 0 Recv dropped: dma 0
Carrier losses 0 Recv dropped: other 29
Link disconnects 0 Recv deferred 0
Link speed 100 Recv overruns 0
Link duplex Full Link auto sensed No
Link mode 100Base-TX Secs since clear 1717


-----Original Message-----
From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Craig Lalley
Sent: Monday, October 20, 2008 9:06 AM
To: HP3000-L@RAVEN.UTC.EDU
Subject: Re: [HP3000-L] Slow printing

Steve,

In order to 'see' how the HP3000 is set,

:LINKCONTROL @,a

-Craig

--- On Mon, 10/20/08, Mark Ranft wrote:
From: Mark Ranft
Subject: Re: Slow printing
To: HP3000-L@RAVEN.UTC.EDU
Date: Monday, October 20, 2008, 8:59 AM

Steve,

I know you meantioned that the switch was set to be forced full
duplex and 100Mb/sec, but is the HP3000 set that way in NMMGR LINK
configuration?

Mark Ranft
(612) 804-2774
mark@pro3k.com

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

The printers are a mix of LJ2430's, P3005's, LJ4350's. They did not have aproblem until I put the 100 MB card in the 3000. Configured 10/full or 100/full depending on the location.

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Jeff Kell
Sent: Monday, October 20, 2008 8:44 AM
To: HP3000-L@RAVEN.UTC.EDU
Subject: Re: [HP3000-L] Slow printing

Davidek, Steve wrote:
> Yes, the card is set to forced 100/full in NMMGR. Very frustrating. It's got to be a setting in NMMGR that I'm just missing (or have forgotten after all these years).

What about the printer? Is it an older half-duplex 10Mbps JetDirect?
Does you network switch match it's port in speed/duplex?

Jeff

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

Mixtures of auto sense and fixed speeds are not good things .....check the settings on the printers and the switch ports...
jp

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Davidek, Steve
Sent: Tuesday, 21 October 2008 3:41 AM
To: HP3000-L@RAVEN.UTC.EDU
Subject: Re: [HP3000-L] Slow printing

Here is the screen shot of my linkcontrol. Anyone see anything I've missed? What is happening is that for example, while printing paychecks, about 20 print, pause for 2 minutes or so and print more. Reports sometimes are fast. Mostly print, pause, print...

Steve

9:41 AM : linkcontrol @,a
Linkname: DTSLINK Linktype: HP-PB IEEE8023 Linkstate: CONNECTED
Physical Path: 10/4/0
Current Station Address: 08-00-09-7B-4E-BB
Default Station Address: 08-00-09-7B-4E-BB
Current Receive Filter: broad(1) any(0) k_pckts(1) x_pckts(0)
Current Multicast Addresses:
09-00-09-00-00-01 09-00-09-00-00-03 09-00-09-00-00-04
09-00-09-00-00-06
Transmits no error 0 Receives no error 0
Transmit byte count 0 Receive byte count 0
Transmits error 0 Receives error 0
Transmits deferred 0 Carrier losses 0
Transmits 1 retry 0 CRC errors 0
Transmits >1 retry 0 Frame losses 0
Trans 16 collisions 0 Whole byte errors 0
Trans late collision 0 Size range errors 0
802 chip restarts 0 Receives dropped 0
Heartbeat losses 0 Receives broadcast 0
Receives multicast 0

Linkname: LANLINK Linktype: HP-PB 100BT Linkstate: CONNECTED
Physical Path: 10/4/4
Current Station Address: 08-00-09-DA-00-72
Default Station Address: 08-00-09-DA-00-72
Current Multicast Addresses:
09-00-09-00-00-01

Transmit bytes 276074 Receive bytes 2349353
Transmits 1465 Receives 805
Transmits no error 1465 Receives broadcast 28045
Transmits dropped 0 Receives multicast 9
Transmits deferred 0 Receives no error 30273
Transmits 1 retry 0 CRC or Maxsize error 0
Transmits >1 retry 0 Code or Align error 0
Trans 16 collisions 0 Recv dropped: addr 1385
Trans late collision 0 Recv dropped: buffer 0
Trans underruns 0 Recv dropped: dma 0
Carrier losses 0 Recv dropped: other 29
Link disconnects 0 Recv deferred 0
Link speed 100 Recv overruns 0
Link duplex Full Link auto sensed No
Link mode 100Base-TX Secs since clear 1717


-----Original Message-----
From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Craig Lalley
Sent: Monday, October 20, 2008 9:06 AM
To: HP3000-L@RAVEN.UTC.EDU
Subject: Re: [HP3000-L] Slow printing

Steve,

In order to 'see' how the HP3000 is set,

:LINKCONTROL @,a

-Craig

--- On Mon, 10/20/08, Mark Ranft wrote:
From: Mark Ranft
Subject: Re: Slow printing
To: HP3000-L@RAVEN.UTC.EDU
Date: Monday, October 20, 2008, 8:59 AM

Steve,

I know you meantioned that the switch was set to be forced full
duplex and 100Mb/sec, but is the HP3000 set that way in NMMGR LINK
configuration?

Mark Ranft
(612) 804-2774
mark@pro3k.com

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

The printers are fixed 10/half. The card is fixed 100/full.

Steve

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of John Pitman
Sent: Monday, October 20, 2008 1:57 PM
To: HP3000-L@RAVEN.UTC.EDU
Subject: Re: [HP3000-L] Slow printing

Mixtures of auto sense and fixed speeds are not good things .....check the settings on the printers and the switch ports...
jp

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Davidek, Steve
Sent: Tuesday, 21 October 2008 3:41 AM
To: HP3000-L@RAVEN.UTC.EDU
Subject: Re: [HP3000-L] Slow printing

Here is the screen shot of my linkcontrol. Anyone see anything I've missed? What is happening is that for example, while printing paychecks, about 20 print, pause for 2 minutes or so and print more. Reports sometimes are fast. Mostly print, pause, print...

Steve

9:41 AM : linkcontrol @,a
Linkname: DTSLINK Linktype: HP-PB IEEE8023 Linkstate: CONNECTED
Physical Path: 10/4/0
Current Station Address: 08-00-09-7B-4E-BB
Default Station Address: 08-00-09-7B-4E-BB
Current Receive Filter: broad(1) any(0) k_pckts(1) x_pckts(0)
Current Multicast Addresses:
09-00-09-00-00-01 09-00-09-00-00-03 09-00-09-00-00-04
09-00-09-00-00-06
Transmits no error 0 Receives no error 0
Transmit byte count 0 Receive byte count 0
Transmits error 0 Receives error 0
Transmits deferred 0 Carrier losses 0
Transmits 1 retry 0 CRC errors 0
Transmits >1 retry 0 Frame losses 0
Trans 16 collisions 0 Whole byte errors 0
Trans late collision 0 Size range errors 0
802 chip restarts 0 Receives dropped 0
Heartbeat losses 0 Receives broadcast 0
Receives multicast 0

Linkname: LANLINK Linktype: HP-PB 100BT Linkstate: CONNECTED
Physical Path: 10/4/4
Current Station Address: 08-00-09-DA-00-72
Default Station Address: 08-00-09-DA-00-72
Current Multicast Addresses:
09-00-09-00-00-01

Transmit bytes 276074 Receive bytes 2349353
Transmits 1465 Receives 805
Transmits no error 1465 Receives broadcast 28045
Transmits dropped 0 Receives multicast 9
Transmits deferred 0 Receives no error 30273
Transmits 1 retry 0 CRC or Maxsize error 0
Transmits >1 retry 0 Code or Align error 0
Trans 16 collisions 0 Recv dropped: addr 1385
Trans late collision 0 Recv dropped: buffer 0
Trans underruns 0 Recv dropped: dma 0
Carrier losses 0 Recv dropped: other 29
Link disconnects 0 Recv deferred 0
Link speed 100 Recv overruns 0
Link duplex Full Link auto sensed No
Link mode 100Base-TX Secs since clear 1717


-----Original Message-----
From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Craig Lalley
Sent: Monday, October 20, 2008 9:06 AM
To: HP3000-L@RAVEN.UTC.EDU
Subject: Re: [HP3000-L] Slow printing

Steve,

In order to 'see' how the HP3000 is set,

:LINKCONTROL @,a

-Craig

--- On Mon, 10/20/08, Mark Ranft wrote:
From: Mark Ranft
Subject: Re: Slow printing
To: HP3000-L@RAVEN.UTC.EDU
Date: Monday, October 20, 2008, 8:59 AM

Steve,

I know you meantioned that the switch was set to be forced full
duplex and 100Mb/sec, but is the HP3000 set that way in NMMGR LINK
configuration?

Mark Ranft
(612) 804-2774
mark@pro3k.com

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

since it seems that your 3000 is not having any other network issues, I
don't think you need to worry about any mpe network changes.

this is an issue that needs to be resolved by your network people. -
d

---
Donna Hofmeister
Allegro Consultants, Inc.
408-252-2330


> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On
> Behalf Of Davidek, Steve
> Sent: Monday, October 20, 2008 1:59 PM
> To: HP3000-L@RAVEN.UTC.EDU
> Subject: Re: [HP3000-L] Slow printing
>
> The printers are fixed 10/half. The card is fixed 100/full.
>
> Steve
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On
> Behalf Of John Pitman
> Sent: Monday, October 20, 2008 1:57 PM
> To: HP3000-L@RAVEN.UTC.EDU
> Subject: Re: [HP3000-L] Slow printing
>
> Mixtures of auto sense and fixed speeds are not good things .....check
> the settings on the printers and the switch ports...
> jp
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On
> Behalf Of Davidek, Steve
> Sent: Tuesday, 21 October 2008 3:41 AM
> To: HP3000-L@RAVEN.UTC.EDU
> Subject: Re: [HP3000-L] Slow printing
>
> Here is the screen shot of my linkcontrol. Anyone see anything I've
> missed? What is happening is that for example, while printing
> paychecks, about 20 print, pause for 2 minutes or so and print more.
> Reports sometimes are fast. Mostly print, pause, print...
>
> Steve
>
> 9:41 AM : linkcontrol @,a
> Linkname: DTSLINK Linktype: HP-PB IEEE8023 Linkstate: CONNECTED
> Physical Path: 10/4/0
> Current Station Address: 08-00-09-7B-4E-BB
> Default Station Address: 08-00-09-7B-4E-BB
> Current Receive Filter: broad(1) any(0) k_pckts(1) x_pckts(0)
> Current Multicast Addresses:
> 09-00-09-00-00-01 09-00-09-00-00-03 09-00-09-00-00-04
> 09-00-09-00-00-06
> Transmits no error 0 Receives no error 0
> Transmit byte count 0 Receive byte count 0
> Transmits error 0 Receives error 0
> Transmits deferred 0 Carrier losses 0
> Transmits 1 retry 0 CRC errors 0
> Transmits >1 retry 0 Frame losses 0
> Trans 16 collisions 0 Whole byte errors 0
> Trans late collision 0 Size range errors 0
> 802 chip restarts 0 Receives dropped 0
> Heartbeat losses 0 Receives broadcast 0
> Receives multicast 0
>
> Linkname: LANLINK Linktype: HP-PB 100BT Linkstate: CONNECTED
> Physical Path: 10/4/4
> Current Station Address: 08-00-09-DA-00-72
> Default Station Address: 08-00-09-DA-00-72
> Current Multicast Addresses:
> 09-00-09-00-00-01
>
> Transmit bytes 276074 Receive bytes
> 2349353
> Transmits 1465 Receives
> 805
> Transmits no error 1465 Receives broadcast
> 28045
> Transmits dropped 0 Receives multicast
> 9
> Transmits deferred 0 Receives no error
> 30273
> Transmits 1 retry 0 CRC or Maxsize error
> 0
> Transmits >1 retry 0 Code or Align error
> 0
> Trans 16 collisions 0 Recv dropped: addr
> 1385
> Trans late collision 0 Recv dropped: buffer
> 0
> Trans underruns 0 Recv dropped: dma
> 0
> Carrier losses 0 Recv dropped: other
> 29
> Link disconnects 0 Recv deferred
> 0
> Link speed 100 Recv overruns
> 0
> Link duplex Full Link auto sensed
> No
> Link mode 100Base-TX Secs since clear
> 1717
>
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On
> Behalf Of Craig Lalley
> Sent: Monday, October 20, 2008 9:06 AM
> To: HP3000-L@RAVEN.UTC.EDU
> Subject: Re: [HP3000-L] Slow printing
>
> Steve,
>
> In order to 'see' how the HP3000 is set,
>
> :LINKCONTROL @,a
>
> -Craig
>
> --- On Mon, 10/20/08, Mark Ranft wrote:
> From: Mark Ranft
> Subject: Re: Slow printing
> To: HP3000-L@RAVEN.UTC.EDU
> Date: Monday, October 20, 2008, 8:59 AM
>
> Steve,
>
> I know you meantioned that the switch was set to be forced full
> duplex and 100Mb/sec, but is the HP3000 set that way in NMMGR LINK
> configuration?
>
> Mark Ranft
> (612) 804-2774
> mark@pro3k.com
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *