Re: The POSiX Animal On An MPE Box - Hewlett Packard

This is a discussion on Re: The POSiX Animal On An MPE Box - Hewlett Packard ; I'm not hardcoding these values -- I get these values from the input file(a bytestream file) and use it's attributes for the temporary file. And thatis what is causing the problem. So I guess I will just build the temp ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Re: The POSiX Animal On An MPE Box

  1. Re: The POSiX Animal On An MPE Box

    I'm not hardcoding these values -- I get these values from the input file(a
    bytestream file) and use it's attributes for the temporary file. And thatis
    what is causing the problem. So I guess I will just build the temp file with
    a smaller flimit.


    Brian.


    On Thu, 14 Aug 2008 21:59:00 -0500, Denys Beauchemin wrote:

    >I think that if you multiply 8192 by 147,483,647 all will be explained. The
    >message is misleading, you are in fact trying to create a 1,208,186,036,244
    >byte file. I think that's rather large. If I read that right, and it's
    >very late where I am, that's a 1.2 terabyte file. You will need a bigger
    >disk. :-)
    >
    >The other file you show is a 2GB byte stream file, which I believe is the
    >default maximum size. Change your REC specifications.
    >
    >Denys
    >
    >-----Original Message-----
    >From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf
    >Of Brian Donaldson
    >Sent: Thursday, August 14, 2008 9:17 PM
    >To: HP3000-L@RAVEN.UTC.EDU
    >Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >
    >Now I see what my error is --
    >
    >BUILD /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2
    >700;REC=-8192,0001,V,ASCII;DISC=147483647;ULABEL=027
    >
    >====>>> EXTENT SIZE EXCEEDS MAXIMUM (FSERR 106) ====<<<
    >
    >Build of file "/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history" failed..
    >(CIERR
    > 279)
    >
    >However, I am not specifying extents on the build command.
    >
    >The temp file is being built with the same FLIMIT as the perm file and that
    >is causing the extents size error.
    >
    > FILE: /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history
    >
    > FILE CODE : 0 FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    > BLK FACTOR: 1 OWNER : MGR.DEV
    > REC SIZE: 1(BYTES) GROUP ID: DEV
    > BLK SIZE: 1(BYTES) SECURITY--READ :
    > EXT SIZE: 0(SECT) WRITE :
    > NUM REC: 52 APPEND :
    > NUM SEC: 16 LOCK :
    > NUM EXT: 1 EXECUTE :
    > MAX REC: 2147483647 **SECURITY IS ON
    > FLAGS : NO ACCESSORS
    > NUM LABELS: 0 CREATED : WED, AUG 13, 2008, 7:34 PM
    > MAX LABELS: 0 MODIFIED: WED, AUG 13, 2008, 7:35 PM
    > DISC DEV #: 2 ACCESSED: THU, AUG 14, 2008, 7:13 PM
    > SEC OFFSET: 0 LABEL ADDR: $0000005E.$005A9920
    > VOLCLASS : MPEXL_SYSTEM_VOLUME_SETISC
    >
    >Apart from building the temp file with a smaller flimit, how do I get out of
    >this one?
    >
    >
    >TIA,
    >Brian.
    >
    >On Thu, 14 Aug 2008 20:20:40 -0500, Denys Beauchemin
    >wrote:
    >
    >>I'm sorry, I mistyped. I meant CIERROR 279.
    >>
    >>:build ./denys/test1;temp
    >>COMPONENT OF PATH DOES NOT EXIST (FSERR 457)
    >>Build of file "./denys/test1" failed. (CIERR 279)
    >>:
    >>
    >>
    >>-----Original Message-----
    >>From: Brian Donaldson [mailto:bmdinsocal@AOL.COM]
    >>Sent: Thursday, August 14, 2008 8:17 PM
    >>To: HP3000 List; Denys Beauchemin
    >>Subject: Re: The POSiX Animal On An MPE Box
    >>
    >><>
    >>
    >>A cierror 273 on a build means the file was not built, for whatever reason.
    >>What is important to get is the FSERROR. I my case, I got a CIERROR 273
    >>when I created a temp POSIX file in a dummy directory, but the FSERROR is
    >>457, which is critical.
    >>
    >><>
    >>
    >>Your 273 = 273 Expected record format of F, V, or U. (CIERR 273)
    >>Your 457 = 457 COMPONENT OF PATH DOES NOT EXIST (FSERR 457)
    >>
    >>(I got both of these errors from catalog.pub.sys)
    >>
    >>However, the error I am getting is a 279 (Build of file "!" failed. (CIERR
    >>279))
    >>
    >>The file actually exists even though the prior PURGE command gave me a -383
    >>error code.
    >>
    >> FILE: /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history
    >>
    >> FILE CODE : 0 FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    >> BLK FACTOR: 1 OWNER : MGR.DEV
    >> REC SIZE: 1(BYTES) GROUP ID: DEV
    >> BLK SIZE: 1(BYTES) SECURITY--READ :
    >> EXT SIZE: 0(SECT) WRITE :
    >> NUM REC: 52 APPEND :
    >> NUM SEC: 16 LOCK :
    >> NUM EXT: 1 EXECUTE :
    >> MAX REC: 2147483647 **SECURITY IS ON
    >> FLAGS : NO ACCESSORS
    >> NUM LABELS: 0 CREATED : WED, AUG 13, 2008, 7:34 PM
    >> MAX LABELS: 0 MODIFIED: WED, AUG 13, 2008, 7:35 PM
    >> DISC DEV #: 2 ACCESSED: THU, AUG 14, 2008, 6:07 PM
    >> SEC OFFSET: 0 LABEL ADDR: $0000005E.$005A9920
    >> VOLCLASS : MPEXL_SYSTEM_VOLUME_SETISC
    >>
    >>Brian.
    >>
    >>
    >>On Thu, 14 Aug 2008 19:53:49 -0500, Denys Beauchemin
    >>wrote:
    >>
    >>>I'm a little confused. I can certainly create a temporary POSIX file and
    >>>view it with listfile ;temp, as donna explained.
    >>>
    >>>But I cannot create a temporary POSIX file in a dummy directory. CIERROR
    >>>-383, a warning, simply means the temp file was not found, for whatever
    >>>reason.
    >>>
    >>>A cierror 273 on a build means the file was not built, for whatever

    >reason.
    >>>What is important to get is the FSERROR. I my case, I got a CIERROR 273
    >>>when I created a temp POSIX file in a dummy directory, but the FSERRORis
    >>>457, which is critical.
    >>>
    >>>Just do a showjcw and see what the fserror is and let us know.
    >>>
    >>>Denys
    >>>
    >>>-----Original Message-----
    >>>From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf
    >>>Of Brian Donaldson
    >>>Sent: Thursday, August 14, 2008 7:29 PM
    >>>To: HP3000-L@RAVEN.UTC.EDU
    >>>Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>
    >>>Then why is my code not working? --
    >>>
    >>>
    >>>Back to my original posting --
    >>>
    >>><< In my program I am purging a file in the temp domain and then building

    >>it
    >>>again in the temp domain (possibly has different parms on the build
    >>>statement, that is why I am purging the old one first)
    >>>
    >>>>-0383>-0007>PURGE
    >>>/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history,TEMP;NOCONFIRM
    >>>
    >>>The -383 is telling me the purge failed because the file does not exist in
    >>>the temp domain, which is just fine.
    >>>
    >>>So further down in the logic I am building the file in the temp domain..
    >>>The build command fails.
    >>>
    >>>Works just fine on files in the MPE file space but obviously isn't working
    >>>in the HFS POSiX space:
    >>>
    >>>
    >>>
    >>> <
    >>>>+0279>+0106>BUILD
    >>>/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2700;REC=-8192

    >,
    >>0
    >>>001,V,ASCII
    >>>;DISC=147483647;ULABEL=027
    >>>
    >>>
    >>> <
    >>>>>Build of file "!" failed. (CIERR 279)
    >>>
    >>> <<
    >>>
    >>>The +279 is the code returned when the file already exists in the temp
    >>>domain.
    >>>
    >>>Can anyone tell me why this isn't working in the POSiX area but works fine
    >>>in the MPE area?
    >>>
    >>>>>
    >>>
    >>>
    >>>Brian.
    >>>
    >>>
    >>>On Thu, 14 Aug 2008 15:12:11 -0700, donna hofmeister
    >>>wrote:
    >>>
    >>>>temporary posix files are quite possible:
    >>>>
    >>>>: build ./foo;temp
    >>>>: listfile ./@,2;temp
    >>>>
    >>>> TEMPORARY FILES FOR MGR.DONNA
    >>>>
    >>>> PATH= /DONNA/PUB/
    >>>>
    >>>> CODE ------------LOGICAL RECORD----------- ----SPACE---- FILENAME
    >>>> SIZE TYP EOF LIMIT R/B SECTORS #X MX
    >>>>
    >>>> 128W FB 0 1023 1 0 0 * foo
    >>>>
    >>>>(I do believe, I do believe)
    >>>>
    >>>> - donna
    >>>>
    >>>>---
    >>>>Donna Hofmeister
    >>>>Allegro Consultants, Inc.
    >>>>408-252-2330
    >>>>
    >>>>
    >>>>> -----Original Message-----
    >>>>> From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On
    >>>>> Behalf Of Johnson, Tracy
    >>>>> Sent: Thursday, August 14, 2008 6:36 AM
    >>>>> To: HP3000-L@RAVEN.UTC.EDU
    >>>>> Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>>>
    >>>>> I always believed you cannot have TEMP files in the POSIX space, they
    >>>>> only exist in MPE space.
    >>>>>
    >>>>>
    >>>>> Tracy Johnson
    >>>>> Measurement Specialties Inc.
    >>>>> BT
    >>>>>
    >>>>>
    >>>>>
    >>>>>
    >>>>>
    >>>>>
    >>>>> NNNN
    >>>>>
    >>>>> > -----Original Message-----
    >>>>> > From: HP-3000 Systems Discussion
    >>>>> > [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Brian Donaldson
    >>>>> > Sent: Thursday, August 14, 2008 2:10 AM
    >>>>> > To: HP3000-L@RAVEN.UTC.EDU
    >>>>> > Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>>> >
    >>>>> > The POSiX saga continues.
    >>>>> >
    >>>>> > In my program I am purging a file in the temp domain and then
    >>>>> > building it
    >>>>> > again in the temp domain (possibly has different parms on the build
    >>>>> > statement, that is why I am purging the old one first)
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>> > >-0383>-0007>PURGE
    >>>>> > /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history,TEMP;NOCONFI
    >>>>> > RM
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>> > The -383 is telling me the purge failed because the file does
    >>>>> > not exist in
    >>>>> > the temp domain, which is just fine.
    >>>>> >
    >>>>> > So further down in the logic I am building the file in the
    >>>>> > temp domain.
    >>>>> > The build command fails.
    >>>>> >
    >>>>> > Works just fine on files in the MPE file space but obviously
    >>>>> > isn't working
    >>>>> > in the HFS POSiX space:
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>> > <
    >>>>> > >+0279>+0106>BUILD
    >>>>> > /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=27
    >>>>> > 00;REC=-8192,0001,V,ASCII
    >>>>> > ;DISC=1474
    >>>>> > 83647;ULABEL=027
    >>>>> >
    >>>>> >
    >>>>> > <
    >>>>> > >>Build of file "!" failed. (CIERR 279)
    >>>>> >
    >>>>> > <<
    >>>>> >
    >>>>> > The +279 is the code returned when the file already exists in
    >>>>> > the temp domain.
    >>>>> >
    >>>>> > Can anyone tell me why this isn't working in the POSiX area
    >>>>> > but works fine
    >>>>> > in the MPE area?
    >>>>> >
    >>>>> > Something I am doing wrong, I know but I am clueless as to
    >>>>> > what my error
    >>>>> > is........
    >>>>> >
    >>>>> > TIA,
    >>>>> > Brian.
    >>>>> >
    >>>>> > * To join/leave the list, search archives, change list settings, *
    >>>>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>>> >
    >>>>>
    >>>>> * To join/leave the list, search archives, change list settings, *
    >>>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>>
    >>>>* To join/leave the list, search archives, change list settings, *
    >>>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>
    >>>* To join/leave the list, search archives, change list settings, *
    >>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>No virus found in this incoming message.
    >>>Checked by AVG - http://www.avg.com
    >>>Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >>>6:43 AM
    >>>
    >>>* To join/leave the list, search archives, change list settings, *
    >>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

    >>
    >>
    >>No virus found in this incoming message.
    >>Checked by AVG - http://www.avg.com
    >>Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >>6:43 AM
    >>
    >>* To join/leave the list, search archives, change list settings, *
    >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

    >
    >* To join/leave the list, search archives, change list settings, *
    >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >No virus found in this incoming message.
    >Checked by AVG - http://www.avg.com
    >Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >6:43 AM
    >
    >* To join/leave the list, search archives, change list settings, *
    >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


    * To join/leave the list, search archives, change list settings, *
    * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


  2. Re: The POSiX Animal On An MPE Box

    Understood. Let me point out that the program doing the interpretation of
    the file information and then formatting the BUILD command with that
    information is doing a piss-poor job. If you look closely at your LISTF,2
    you will notice this:

    MAX REC: 2147483647
    REC SIZE: 1(BYTES)
    FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    FILE CODE : 0
    MAX LABELS: 0

    And from that it creates this BUILD command:

    BUILD
    .../.sh_history;TEMP;CODE=2700;REC=-8192,0001,V,ASCII;DISC=147483647;ULABEL=0
    27

    The MAX REC is 2,147,483,647, yet the build says 147,483,647; it's dropped
    the MSB of 2GB. Whoops.
    The REC SIZE is 1 byte, your BUILD says 8192.
    The file is ASCII, BYTESTREAM, your BUILD says ASCII, VARIABLE.
    The FILE CODE is 0, your BUILD says code=2700.
    The MAX LABELS is 0, your BUILD says 27.

    I think the file name is right.



    Denys...

    -----Original Message-----
    From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf
    Of Brian Donaldson
    Sent: Friday, August 15, 2008 8:03 AM
    To: HP3000-L@RAVEN.UTC.EDU
    Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box

    I'm not hardcoding these values -- I get these values from the input file (a
    bytestream file) and use it's attributes for the temporary file. And that is
    what is causing the problem. So I guess I will just build the temp file with
    a smaller flimit.


    Brian.


    On Thu, 14 Aug 2008 21:59:00 -0500, Denys Beauchemin
    wrote:

    >I think that if you multiply 8192 by 147,483,647 all will be explained.

    The
    >message is misleading, you are in fact trying to create a 1,208,186,036,244
    >byte file. I think that's rather large. If I read that right, and it's
    >very late where I am, that's a 1.2 terabyte file. You will need a bigger
    >disk. :-)
    >
    >The other file you show is a 2GB byte stream file, which I believe is the
    >default maximum size. Change your REC specifications.
    >
    >Denys
    >
    >-----Original Message-----
    >From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf
    >Of Brian Donaldson
    >Sent: Thursday, August 14, 2008 9:17 PM
    >To: HP3000-L@RAVEN.UTC.EDU
    >Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >
    >Now I see what my error is --
    >
    >BUILD /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2
    >700;REC=-8192,0001,V,ASCII;DISC=147483647;ULABEL=027
    >
    >====>>> EXTENT SIZE EXCEEDS MAXIMUM (FSERR 106) ====<<<
    >
    >Build of file "/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history" failed.
    >(CIERR
    > 279)
    >
    >However, I am not specifying extents on the build command.
    >
    >The temp file is being built with the same FLIMIT as the perm file and that
    >is causing the extents size error.
    >
    > FILE: /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history
    >
    > FILE CODE : 0 FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    > BLK FACTOR: 1 OWNER : MGR.DEV
    > REC SIZE: 1(BYTES) GROUP ID: DEV
    > BLK SIZE: 1(BYTES) SECURITY--READ :
    > EXT SIZE: 0(SECT) WRITE :
    > NUM REC: 52 APPEND :
    > NUM SEC: 16 LOCK :
    > NUM EXT: 1 EXECUTE :
    > MAX REC: 2147483647 **SECURITY IS ON
    > FLAGS : NO ACCESSORS
    > NUM LABELS: 0 CREATED : WED, AUG 13, 2008, 7:34 PM
    > MAX LABELS: 0 MODIFIED: WED, AUG 13, 2008, 7:35 PM
    > DISC DEV #: 2 ACCESSED: THU, AUG 14, 2008, 7:13 PM
    > SEC OFFSET: 0 LABEL ADDR: $0000005E.$005A9920
    > VOLCLASS : MPEXL_SYSTEM_VOLUME_SETISC
    >
    >Apart from building the temp file with a smaller flimit, how do I get out

    of
    >this one?
    >
    >
    >TIA,
    >Brian.
    >
    >On Thu, 14 Aug 2008 20:20:40 -0500, Denys Beauchemin
    >wrote:
    >
    >>I'm sorry, I mistyped. I meant CIERROR 279.
    >>
    >>:build ./denys/test1;temp
    >>COMPONENT OF PATH DOES NOT EXIST (FSERR 457)
    >>Build of file "./denys/test1" failed. (CIERR 279)
    >>:
    >>
    >>
    >>-----Original Message-----
    >>From: Brian Donaldson [mailto:bmdinsocal@AOL.COM]
    >>Sent: Thursday, August 14, 2008 8:17 PM
    >>To: HP3000 List; Denys Beauchemin
    >>Subject: Re: The POSiX Animal On An MPE Box
    >>
    >><>
    >>
    >>A cierror 273 on a build means the file was not built, for whatever

    reason.
    >>What is important to get is the FSERROR. I my case, I got a CIERROR 273
    >>when I created a temp POSIX file in a dummy directory, but the FSERROR is
    >>457, which is critical.
    >>
    >><>
    >>
    >>Your 273 = 273 Expected record format of F, V, or U. (CIERR 273)
    >>Your 457 = 457 COMPONENT OF PATH DOES NOT EXIST (FSERR 457)
    >>
    >>(I got both of these errors from catalog.pub.sys)
    >>
    >>However, the error I am getting is a 279 (Build of file "!" failed. (CIERR
    >>279))
    >>
    >>The file actually exists even though the prior PURGE command gave me a

    -383
    >>error code.
    >>
    >> FILE: /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history
    >>
    >> FILE CODE : 0 FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    >> BLK FACTOR: 1 OWNER : MGR.DEV
    >> REC SIZE: 1(BYTES) GROUP ID: DEV
    >> BLK SIZE: 1(BYTES) SECURITY--READ :
    >> EXT SIZE: 0(SECT) WRITE :
    >> NUM REC: 52 APPEND :
    >> NUM SEC: 16 LOCK :
    >> NUM EXT: 1 EXECUTE :
    >> MAX REC: 2147483647 **SECURITY IS ON
    >> FLAGS : NO ACCESSORS
    >> NUM LABELS: 0 CREATED : WED, AUG 13, 2008, 7:34 PM
    >> MAX LABELS: 0 MODIFIED: WED, AUG 13, 2008, 7:35 PM
    >> DISC DEV #: 2 ACCESSED: THU, AUG 14, 2008, 6:07 PM
    >> SEC OFFSET: 0 LABEL ADDR: $0000005E.$005A9920
    >> VOLCLASS : MPEXL_SYSTEM_VOLUME_SETISC
    >>
    >>Brian.
    >>
    >>
    >>On Thu, 14 Aug 2008 19:53:49 -0500, Denys Beauchemin
    >>wrote:
    >>
    >>>I'm a little confused. I can certainly create a temporary POSIX file and
    >>>view it with listfile ;temp, as donna explained.
    >>>
    >>>But I cannot create a temporary POSIX file in a dummy directory. CIERROR
    >>>-383, a warning, simply means the temp file was not found, for whatever
    >>>reason.
    >>>
    >>>A cierror 273 on a build means the file was not built, for whatever

    >reason.
    >>>What is important to get is the FSERROR. I my case, I got a CIERROR 273
    >>>when I created a temp POSIX file in a dummy directory, but the FSERROR is
    >>>457, which is critical.
    >>>
    >>>Just do a showjcw and see what the fserror is and let us know.
    >>>
    >>>Denys
    >>>
    >>>-----Original Message-----
    >>>From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On

    Behalf
    >>>Of Brian Donaldson
    >>>Sent: Thursday, August 14, 2008 7:29 PM
    >>>To: HP3000-L@RAVEN.UTC.EDU
    >>>Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>
    >>>Then why is my code not working? --
    >>>
    >>>
    >>>Back to my original posting --
    >>>
    >>><< In my program I am purging a file in the temp domain and then building

    >>it
    >>>again in the temp domain (possibly has different parms on the build
    >>>statement, that is why I am purging the old one first)
    >>>
    >>>>-0383>-0007>PURGE
    >>>/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history,TEMP;NOCONFIRM
    >>>
    >>>The -383 is telling me the purge failed because the file does not exist

    in
    >>>the temp domain, which is just fine.
    >>>
    >>>So further down in the logic I am building the file in the temp domain.
    >>>The build command fails.
    >>>
    >>>Works just fine on files in the MPE file space but obviously isn't

    working
    >>>in the HFS POSiX space:
    >>>
    >>>
    >>>
    >>> <
    >>>>+0279>+0106>BUILD
    >>>/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2700;REC=-819

    2
    >,
    >>0
    >>>001,V,ASCII
    >>>;DISC=147483647;ULABEL=027
    >>>
    >>>
    >>> <
    >>>>>Build of file "!" failed. (CIERR 279)
    >>>
    >>> <<
    >>>
    >>>The +279 is the code returned when the file already exists in the temp
    >>>domain.
    >>>
    >>>Can anyone tell me why this isn't working in the POSiX area but works

    fine
    >>>in the MPE area?
    >>>
    >>>>>
    >>>
    >>>
    >>>Brian.
    >>>
    >>>
    >>>On Thu, 14 Aug 2008 15:12:11 -0700, donna hofmeister
    >>>wrote:
    >>>
    >>>>temporary posix files are quite possible:
    >>>>
    >>>>: build ./foo;temp
    >>>>: listfile ./@,2;temp
    >>>>
    >>>> TEMPORARY FILES FOR MGR.DONNA
    >>>>
    >>>> PATH= /DONNA/PUB/
    >>>>
    >>>> CODE ------------LOGICAL RECORD----------- ----SPACE---- FILENAME
    >>>> SIZE TYP EOF LIMIT R/B SECTORS #X MX
    >>>>
    >>>> 128W FB 0 1023 1 0 0 * foo
    >>>>
    >>>>(I do believe, I do believe)
    >>>>
    >>>> - donna
    >>>>
    >>>>---
    >>>>Donna Hofmeister
    >>>>Allegro Consultants, Inc.
    >>>>408-252-2330
    >>>>
    >>>>
    >>>>> -----Original Message-----
    >>>>> From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On
    >>>>> Behalf Of Johnson, Tracy
    >>>>> Sent: Thursday, August 14, 2008 6:36 AM
    >>>>> To: HP3000-L@RAVEN.UTC.EDU
    >>>>> Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>>>
    >>>>> I always believed you cannot have TEMP files in the POSIX space, they
    >>>>> only exist in MPE space.
    >>>>>
    >>>>>
    >>>>> Tracy Johnson
    >>>>> Measurement Specialties Inc.
    >>>>> BT
    >>>>>
    >>>>>
    >>>>>
    >>>>>
    >>>>>
    >>>>>
    >>>>> NNNN
    >>>>>
    >>>>> > -----Original Message-----
    >>>>> > From: HP-3000 Systems Discussion
    >>>>> > [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Brian Donaldson
    >>>>> > Sent: Thursday, August 14, 2008 2:10 AM
    >>>>> > To: HP3000-L@RAVEN.UTC.EDU
    >>>>> > Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>>> >
    >>>>> > The POSiX saga continues.
    >>>>> >
    >>>>> > In my program I am purging a file in the temp domain and then
    >>>>> > building it
    >>>>> > again in the temp domain (possibly has different parms on the build
    >>>>> > statement, that is why I am purging the old one first)
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>> > >-0383>-0007>PURGE
    >>>>> > /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history,TEMP;NOCONFI
    >>>>> > RM
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>> > The -383 is telling me the purge failed because the file does
    >>>>> > not exist in
    >>>>> > the temp domain, which is just fine.
    >>>>> >
    >>>>> > So further down in the logic I am building the file in the
    >>>>> > temp domain.
    >>>>> > The build command fails.
    >>>>> >
    >>>>> > Works just fine on files in the MPE file space but obviously
    >>>>> > isn't working
    >>>>> > in the HFS POSiX space:
    >>>>> >
    >>>>> >
    >>>>> >
    >>>>> > <
    >>>>> > >+0279>+0106>BUILD
    >>>>> > /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=27
    >>>>> > 00;REC=-8192,0001,V,ASCII
    >>>>> > ;DISC=1474
    >>>>> > 83647;ULABEL=027
    >>>>> >
    >>>>> >
    >>>>> > <
    >>>>> > >>Build of file "!" failed. (CIERR 279)
    >>>>> >
    >>>>> > <<
    >>>>> >
    >>>>> > The +279 is the code returned when the file already exists in
    >>>>> > the temp domain.
    >>>>> >
    >>>>> > Can anyone tell me why this isn't working in the POSiX area
    >>>>> > but works fine
    >>>>> > in the MPE area?
    >>>>> >
    >>>>> > Something I am doing wrong, I know but I am clueless as to
    >>>>> > what my error
    >>>>> > is........
    >>>>> >
    >>>>> > TIA,
    >>>>> > Brian.
    >>>>> >
    >>>>> > * To join/leave the list, search archives, change list settings, *
    >>>>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>>> >
    >>>>>
    >>>>> * To join/leave the list, search archives, change list settings, *
    >>>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>>
    >>>>* To join/leave the list, search archives, change list settings, *
    >>>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>
    >>>* To join/leave the list, search archives, change list settings, *
    >>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>No virus found in this incoming message.
    >>>Checked by AVG - http://www.avg.com
    >>>Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >>>6:43 AM
    >>>
    >>>* To join/leave the list, search archives, change list settings, *
    >>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

    >>
    >>
    >>No virus found in this incoming message.
    >>Checked by AVG - http://www.avg.com
    >>Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >>6:43 AM
    >>
    >>* To join/leave the list, search archives, change list settings, *
    >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

    >
    >* To join/leave the list, search archives, change list settings, *
    >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >No virus found in this incoming message.
    >Checked by AVG - http://www.avg.com
    >Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >6:43 AM
    >
    >* To join/leave the list, search archives, change list settings, *
    >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


    * To join/leave the list, search archives, change list settings, *
    * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    No virus found in this incoming message.
    Checked by AVG - http://www.avg.com
    Version: 8.0.138 / Virus Database: 270.6.3/1613 - Release Date: 8/15/2008
    5:58 AM

    * To join/leave the list, search archives, change list settings, *
    * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


+ Reply to Thread