Re: The POSiX Animal On An MPE Box - Hewlett Packard

This is a discussion on Re: The POSiX Animal On An MPE Box - Hewlett Packard ; Now I see what my error is -- BUILD /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2 700;REC=-8192,0001,V,ASCII;DISC=147483647;ULABEL=027 ====>>> EXTENT SIZE EXCEEDS MAXIMUM (FSERR 106) ==== Build of file "/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history" failed.(CIERR 279) However, I am not specifying extents on the build command. The temp file is being ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Re: The POSiX Animal On An MPE Box

  1. Re: The POSiX Animal On An MPE Box

    Now I see what my error is --

    BUILD /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2
    700;REC=-8192,0001,V,ASCII;DISC=147483647;ULABEL=027

    ====>>> EXTENT SIZE EXCEEDS MAXIMUM (FSERR 106) ====<<<

    Build of file "/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history" failed.(CIERR
    279)

    However, I am not specifying extents on the build command.

    The temp file is being built with the same FLIMIT as the perm file and that
    is causing the extents size error.

    FILE: /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history

    FILE CODE : 0 FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    BLK FACTOR: 1 OWNER : MGR.DEV
    REC SIZE: 1(BYTES) GROUP ID: DEV
    BLK SIZE: 1(BYTES) SECURITY--READ :
    EXT SIZE: 0(SECT) WRITE :
    NUM REC: 52 APPEND :
    NUM SEC: 16 LOCK :
    NUM EXT: 1 EXECUTE :
    MAX REC: 2147483647 **SECURITY IS ON
    FLAGS : NO ACCESSORS
    NUM LABELS: 0 CREATED : WED, AUG 13, 2008, 7:34 PM
    MAX LABELS: 0 MODIFIED: WED, AUG 13, 2008, 7:35 PM
    DISC DEV #: 2 ACCESSED: THU, AUG 14, 2008, 7:13 PM
    SEC OFFSET: 0 LABEL ADDR: $0000005E.$005A9920
    VOLCLASS : MPEXL_SYSTEM_VOLUME_SETISC

    Apart from building the temp file with a smaller flimit, how do I get outof
    this one?


    TIA,
    Brian.

    On Thu, 14 Aug 2008 20:20:40 -0500, Denys Beauchemin wrote:

    >I'm sorry, I mistyped. I meant CIERROR 279.
    >
    >:build ./denys/test1;temp
    >COMPONENT OF PATH DOES NOT EXIST (FSERR 457)
    >Build of file "./denys/test1" failed. (CIERR 279)
    >:
    >
    >
    >-----Original Message-----
    >From: Brian Donaldson [mailto:bmdinsocal@AOL.COM]
    >Sent: Thursday, August 14, 2008 8:17 PM
    >To: HP3000 List; Denys Beauchemin
    >Subject: Re: The POSiX Animal On An MPE Box
    >
    ><>
    >
    >A cierror 273 on a build means the file was not built, for whatever reason.
    >What is important to get is the FSERROR. I my case, I got a CIERROR 273
    >when I created a temp POSIX file in a dummy directory, but the FSERROR is
    >457, which is critical.
    >
    ><>
    >
    >Your 273 = 273 Expected record format of F, V, or U. (CIERR 273)
    >Your 457 = 457 COMPONENT OF PATH DOES NOT EXIST (FSERR 457)
    >
    >(I got both of these errors from catalog.pub.sys)
    >
    >However, the error I am getting is a 279 (Build of file "!" failed. (CIERR
    >279))
    >
    >The file actually exists even though the prior PURGE command gave me a -383
    >error code.
    >
    > FILE: /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history
    >
    > FILE CODE : 0 FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    > BLK FACTOR: 1 OWNER : MGR.DEV
    > REC SIZE: 1(BYTES) GROUP ID: DEV
    > BLK SIZE: 1(BYTES) SECURITY--READ :
    > EXT SIZE: 0(SECT) WRITE :
    > NUM REC: 52 APPEND :
    > NUM SEC: 16 LOCK :
    > NUM EXT: 1 EXECUTE :
    > MAX REC: 2147483647 **SECURITY IS ON
    > FLAGS : NO ACCESSORS
    > NUM LABELS: 0 CREATED : WED, AUG 13, 2008, 7:34 PM
    > MAX LABELS: 0 MODIFIED: WED, AUG 13, 2008, 7:35 PM
    > DISC DEV #: 2 ACCESSED: THU, AUG 14, 2008, 6:07 PM
    > SEC OFFSET: 0 LABEL ADDR: $0000005E.$005A9920
    > VOLCLASS : MPEXL_SYSTEM_VOLUME_SETISC
    >
    >Brian.
    >
    >
    >On Thu, 14 Aug 2008 19:53:49 -0500, Denys Beauchemin
    >wrote:
    >
    >>I'm a little confused. I can certainly create a temporary POSIX file and
    >>view it with listfile ;temp, as donna explained.
    >>
    >>But I cannot create a temporary POSIX file in a dummy directory. CIERROR
    >>-383, a warning, simply means the temp file was not found, for whatever
    >>reason.
    >>
    >>A cierror 273 on a build means the file was not built, for whatever reason.
    >>What is important to get is the FSERROR. I my case, I got a CIERROR 273
    >>when I created a temp POSIX file in a dummy directory, but the FSERROR is
    >>457, which is critical.
    >>
    >>Just do a showjcw and see what the fserror is and let us know.
    >>
    >>Denys
    >>
    >>-----Original Message-----
    >>From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf
    >>Of Brian Donaldson
    >>Sent: Thursday, August 14, 2008 7:29 PM
    >>To: HP3000-L@RAVEN.UTC.EDU
    >>Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>
    >>Then why is my code not working? --
    >>
    >>
    >>Back to my original posting --
    >>
    >><< In my program I am purging a file in the temp domain and then building

    >it
    >>again in the temp domain (possibly has different parms on the build
    >>statement, that is why I am purging the old one first)
    >>
    >>>-0383>-0007>PURGE

    >>/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history,TEMP;NOCONFIRM
    >>
    >>The -383 is telling me the purge failed because the file does not existin
    >>the temp domain, which is just fine.
    >>
    >>So further down in the logic I am building the file in the temp domain.
    >>The build command fails.
    >>
    >>Works just fine on files in the MPE file space but obviously isn't working
    >>in the HFS POSiX space:
    >>
    >>
    >>
    >> <
    >>>+0279>+0106>BUILD

    >>/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2700;REC=-8192,

    >0
    >>001,V,ASCII
    >>;DISC=147483647;ULABEL=027
    >>
    >>
    >> <
    >>>>Build of file "!" failed. (CIERR 279)

    >>
    >> <<
    >>
    >>The +279 is the code returned when the file already exists in the temp
    >>domain.
    >>
    >>Can anyone tell me why this isn't working in the POSiX area but works fine
    >>in the MPE area?
    >>
    >>>>

    >>
    >>
    >>Brian.
    >>
    >>
    >>On Thu, 14 Aug 2008 15:12:11 -0700, donna hofmeister
    >>wrote:
    >>
    >>>temporary posix files are quite possible:
    >>>
    >>>: build ./foo;temp
    >>>: listfile ./@,2;temp
    >>>
    >>> TEMPORARY FILES FOR MGR.DONNA
    >>>
    >>> PATH= /DONNA/PUB/
    >>>
    >>> CODE ------------LOGICAL RECORD----------- ----SPACE---- FILENAME
    >>> SIZE TYP EOF LIMIT R/B SECTORS #X MX
    >>>
    >>> 128W FB 0 1023 1 0 0 * foo
    >>>
    >>>(I do believe, I do believe)
    >>>
    >>> - donna
    >>>
    >>>---
    >>>Donna Hofmeister
    >>>Allegro Consultants, Inc.
    >>>408-252-2330
    >>>
    >>>
    >>>> -----Original Message-----
    >>>> From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On
    >>>> Behalf Of Johnson, Tracy
    >>>> Sent: Thursday, August 14, 2008 6:36 AM
    >>>> To: HP3000-L@RAVEN.UTC.EDU
    >>>> Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>>
    >>>> I always believed you cannot have TEMP files in the POSIX space, they
    >>>> only exist in MPE space.
    >>>>
    >>>>
    >>>> Tracy Johnson
    >>>> Measurement Specialties Inc.
    >>>> BT
    >>>>
    >>>>
    >>>>
    >>>>
    >>>>
    >>>>
    >>>> NNNN
    >>>>
    >>>> > -----Original Message-----
    >>>> > From: HP-3000 Systems Discussion
    >>>> > [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Brian Donaldson
    >>>> > Sent: Thursday, August 14, 2008 2:10 AM
    >>>> > To: HP3000-L@RAVEN.UTC.EDU
    >>>> > Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>> >
    >>>> > The POSiX saga continues.
    >>>> >
    >>>> > In my program I am purging a file in the temp domain and then
    >>>> > building it
    >>>> > again in the temp domain (possibly has different parms on the build
    >>>> > statement, that is why I am purging the old one first)
    >>>> >
    >>>> >
    >>>> >
    >>>> > >-0383>-0007>PURGE
    >>>> > /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history,TEMP;NOCONFI
    >>>> > RM
    >>>> >
    >>>> >
    >>>> >
    >>>> > The -383 is telling me the purge failed because the file does
    >>>> > not exist in
    >>>> > the temp domain, which is just fine.
    >>>> >
    >>>> > So further down in the logic I am building the file in the
    >>>> > temp domain.
    >>>> > The build command fails.
    >>>> >
    >>>> > Works just fine on files in the MPE file space but obviously
    >>>> > isn't working
    >>>> > in the HFS POSiX space:
    >>>> >
    >>>> >
    >>>> >
    >>>> > <
    >>>> > >+0279>+0106>BUILD
    >>>> > /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=27
    >>>> > 00;REC=-8192,0001,V,ASCII
    >>>> > ;DISC=1474
    >>>> > 83647;ULABEL=027
    >>>> >
    >>>> >
    >>>> > <
    >>>> > >>Build of file "!" failed. (CIERR 279)
    >>>> >
    >>>> > <<
    >>>> >
    >>>> > The +279 is the code returned when the file already exists in
    >>>> > the temp domain.
    >>>> >
    >>>> > Can anyone tell me why this isn't working in the POSiX area
    >>>> > but works fine
    >>>> > in the MPE area?
    >>>> >
    >>>> > Something I am doing wrong, I know but I am clueless as to
    >>>> > what my error
    >>>> > is........
    >>>> >
    >>>> > TIA,
    >>>> > Brian.
    >>>> >
    >>>> > * To join/leave the list, search archives, change list settings, *
    >>>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>> >
    >>>>
    >>>> * To join/leave the list, search archives, change list settings, *
    >>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>
    >>>* To join/leave the list, search archives, change list settings, *
    >>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

    >>
    >>* To join/leave the list, search archives, change list settings, *
    >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>No virus found in this incoming message.
    >>Checked by AVG - http://www.avg.com
    >>Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >>6:43 AM
    >>
    >>* To join/leave the list, search archives, change list settings, *
    >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

    >
    >
    >No virus found in this incoming message.
    >Checked by AVG - http://www.avg.com
    >Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >6:43 AM
    >
    >* To join/leave the list, search archives, change list settings, *
    >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


    * To join/leave the list, search archives, change list settings, *
    * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


  2. Re: The POSiX Animal On An MPE Box

    I think that if you multiply 8192 by 147,483,647 all will be explained. The
    message is misleading, you are in fact trying to create a 1,208,186,036,244
    byte file. I think that's rather large. If I read that right, and it's
    very late where I am, that's a 1.2 terabyte file. You will need a bigger
    disk. :-)

    The other file you show is a 2GB byte stream file, which I believe is the
    default maximum size. Change your REC specifications.

    Denys

    -----Original Message-----
    From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf
    Of Brian Donaldson
    Sent: Thursday, August 14, 2008 9:17 PM
    To: HP3000-L@RAVEN.UTC.EDU
    Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box

    Now I see what my error is --

    BUILD /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2
    700;REC=-8192,0001,V,ASCII;DISC=147483647;ULABEL=027

    ====>>> EXTENT SIZE EXCEEDS MAXIMUM (FSERR 106) ====<<<

    Build of file "/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history" failed.
    (CIERR
    279)

    However, I am not specifying extents on the build command.

    The temp file is being built with the same FLIMIT as the perm file and that
    is causing the extents size error.

    FILE: /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history

    FILE CODE : 0 FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    BLK FACTOR: 1 OWNER : MGR.DEV
    REC SIZE: 1(BYTES) GROUP ID: DEV
    BLK SIZE: 1(BYTES) SECURITY--READ :
    EXT SIZE: 0(SECT) WRITE :
    NUM REC: 52 APPEND :
    NUM SEC: 16 LOCK :
    NUM EXT: 1 EXECUTE :
    MAX REC: 2147483647 **SECURITY IS ON
    FLAGS : NO ACCESSORS
    NUM LABELS: 0 CREATED : WED, AUG 13, 2008, 7:34 PM
    MAX LABELS: 0 MODIFIED: WED, AUG 13, 2008, 7:35 PM
    DISC DEV #: 2 ACCESSED: THU, AUG 14, 2008, 7:13 PM
    SEC OFFSET: 0 LABEL ADDR: $0000005E.$005A9920
    VOLCLASS : MPEXL_SYSTEM_VOLUME_SETISC

    Apart from building the temp file with a smaller flimit, how do I get out of
    this one?


    TIA,
    Brian.

    On Thu, 14 Aug 2008 20:20:40 -0500, Denys Beauchemin
    wrote:

    >I'm sorry, I mistyped. I meant CIERROR 279.
    >
    >:build ./denys/test1;temp
    >COMPONENT OF PATH DOES NOT EXIST (FSERR 457)
    >Build of file "./denys/test1" failed. (CIERR 279)
    >:
    >
    >
    >-----Original Message-----
    >From: Brian Donaldson [mailto:bmdinsocal@AOL.COM]
    >Sent: Thursday, August 14, 2008 8:17 PM
    >To: HP3000 List; Denys Beauchemin
    >Subject: Re: The POSiX Animal On An MPE Box
    >
    ><>
    >
    >A cierror 273 on a build means the file was not built, for whatever reason.
    >What is important to get is the FSERROR. I my case, I got a CIERROR 273
    >when I created a temp POSIX file in a dummy directory, but the FSERROR is
    >457, which is critical.
    >
    ><>
    >
    >Your 273 = 273 Expected record format of F, V, or U. (CIERR 273)
    >Your 457 = 457 COMPONENT OF PATH DOES NOT EXIST (FSERR 457)
    >
    >(I got both of these errors from catalog.pub.sys)
    >
    >However, the error I am getting is a 279 (Build of file "!" failed. (CIERR
    >279))
    >
    >The file actually exists even though the prior PURGE command gave me a -383
    >error code.
    >
    > FILE: /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history
    >
    > FILE CODE : 0 FOPTIONS: ASCII,BYTESTREAM,NOCCTL,STD
    > BLK FACTOR: 1 OWNER : MGR.DEV
    > REC SIZE: 1(BYTES) GROUP ID: DEV
    > BLK SIZE: 1(BYTES) SECURITY--READ :
    > EXT SIZE: 0(SECT) WRITE :
    > NUM REC: 52 APPEND :
    > NUM SEC: 16 LOCK :
    > NUM EXT: 1 EXECUTE :
    > MAX REC: 2147483647 **SECURITY IS ON
    > FLAGS : NO ACCESSORS
    > NUM LABELS: 0 CREATED : WED, AUG 13, 2008, 7:34 PM
    > MAX LABELS: 0 MODIFIED: WED, AUG 13, 2008, 7:35 PM
    > DISC DEV #: 2 ACCESSED: THU, AUG 14, 2008, 6:07 PM
    > SEC OFFSET: 0 LABEL ADDR: $0000005E.$005A9920
    > VOLCLASS : MPEXL_SYSTEM_VOLUME_SETISC
    >
    >Brian.
    >
    >
    >On Thu, 14 Aug 2008 19:53:49 -0500, Denys Beauchemin
    >wrote:
    >
    >>I'm a little confused. I can certainly create a temporary POSIX file and
    >>view it with listfile ;temp, as donna explained.
    >>
    >>But I cannot create a temporary POSIX file in a dummy directory. CIERROR
    >>-383, a warning, simply means the temp file was not found, for whatever
    >>reason.
    >>
    >>A cierror 273 on a build means the file was not built, for whatever

    reason.
    >>What is important to get is the FSERROR. I my case, I got a CIERROR 273
    >>when I created a temp POSIX file in a dummy directory, but the FSERROR is
    >>457, which is critical.
    >>
    >>Just do a showjcw and see what the fserror is and let us know.
    >>
    >>Denys
    >>
    >>-----Original Message-----
    >>From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf
    >>Of Brian Donaldson
    >>Sent: Thursday, August 14, 2008 7:29 PM
    >>To: HP3000-L@RAVEN.UTC.EDU
    >>Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>
    >>Then why is my code not working? --
    >>
    >>
    >>Back to my original posting --
    >>
    >><< In my program I am purging a file in the temp domain and then building

    >it
    >>again in the temp domain (possibly has different parms on the build
    >>statement, that is why I am purging the old one first)
    >>
    >>>-0383>-0007>PURGE

    >>/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history,TEMP;NOCONFIRM
    >>
    >>The -383 is telling me the purge failed because the file does not exist in
    >>the temp domain, which is just fine.
    >>
    >>So further down in the logic I am building the file in the temp domain.
    >>The build command fails.
    >>
    >>Works just fine on files in the MPE file space but obviously isn't working
    >>in the HFS POSiX space:
    >>
    >>
    >>
    >> <
    >>>+0279>+0106>BUILD

    >>/DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=2700;REC=-8192

    ,
    >0
    >>001,V,ASCII
    >>;DISC=147483647;ULABEL=027
    >>
    >>
    >> <
    >>>>Build of file "!" failed. (CIERR 279)

    >>
    >> <<
    >>
    >>The +279 is the code returned when the file already exists in the temp
    >>domain.
    >>
    >>Can anyone tell me why this isn't working in the POSiX area but works fine
    >>in the MPE area?
    >>
    >>>>

    >>
    >>
    >>Brian.
    >>
    >>
    >>On Thu, 14 Aug 2008 15:12:11 -0700, donna hofmeister
    >>wrote:
    >>
    >>>temporary posix files are quite possible:
    >>>
    >>>: build ./foo;temp
    >>>: listfile ./@,2;temp
    >>>
    >>> TEMPORARY FILES FOR MGR.DONNA
    >>>
    >>> PATH= /DONNA/PUB/
    >>>
    >>> CODE ------------LOGICAL RECORD----------- ----SPACE---- FILENAME
    >>> SIZE TYP EOF LIMIT R/B SECTORS #X MX
    >>>
    >>> 128W FB 0 1023 1 0 0 * foo
    >>>
    >>>(I do believe, I do believe)
    >>>
    >>> - donna
    >>>
    >>>---
    >>>Donna Hofmeister
    >>>Allegro Consultants, Inc.
    >>>408-252-2330
    >>>
    >>>
    >>>> -----Original Message-----
    >>>> From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On
    >>>> Behalf Of Johnson, Tracy
    >>>> Sent: Thursday, August 14, 2008 6:36 AM
    >>>> To: HP3000-L@RAVEN.UTC.EDU
    >>>> Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>>
    >>>> I always believed you cannot have TEMP files in the POSIX space, they
    >>>> only exist in MPE space.
    >>>>
    >>>>
    >>>> Tracy Johnson
    >>>> Measurement Specialties Inc.
    >>>> BT
    >>>>
    >>>>
    >>>>
    >>>>
    >>>>
    >>>>
    >>>> NNNN
    >>>>
    >>>> > -----Original Message-----
    >>>> > From: HP-3000 Systems Discussion
    >>>> > [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Brian Donaldson
    >>>> > Sent: Thursday, August 14, 2008 2:10 AM
    >>>> > To: HP3000-L@RAVEN.UTC.EDU
    >>>> > Subject: Re: [HP3000-L] The POSiX Animal On An MPE Box
    >>>> >
    >>>> > The POSiX saga continues.
    >>>> >
    >>>> > In my program I am purging a file in the temp domain and then
    >>>> > building it
    >>>> > again in the temp domain (possibly has different parms on the build
    >>>> > statement, that is why I am purging the old one first)
    >>>> >
    >>>> >
    >>>> >
    >>>> > >-0383>-0007>PURGE
    >>>> > /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history,TEMP;NOCONFI
    >>>> > RM
    >>>> >
    >>>> >
    >>>> >
    >>>> > The -383 is telling me the purge failed because the file does
    >>>> > not exist in
    >>>> > the temp domain, which is just fine.
    >>>> >
    >>>> > So further down in the logic I am building the file in the
    >>>> > temp domain.
    >>>> > The build command fails.
    >>>> >
    >>>> > Works just fine on files in the MPE file space but obviously
    >>>> > isn't working
    >>>> > in the HFS POSiX space:
    >>>> >
    >>>> >
    >>>> >
    >>>> > <
    >>>> > >+0279>+0106>BUILD
    >>>> > /DEV/PUB/mama/papa/baby/bear/porridge/.sh_history;TEMP;CODE=27
    >>>> > 00;REC=-8192,0001,V,ASCII
    >>>> > ;DISC=1474
    >>>> > 83647;ULABEL=027
    >>>> >
    >>>> >
    >>>> > <
    >>>> > >>Build of file "!" failed. (CIERR 279)
    >>>> >
    >>>> > <<
    >>>> >
    >>>> > The +279 is the code returned when the file already exists in
    >>>> > the temp domain.
    >>>> >
    >>>> > Can anyone tell me why this isn't working in the POSiX area
    >>>> > but works fine
    >>>> > in the MPE area?
    >>>> >
    >>>> > Something I am doing wrong, I know but I am clueless as to
    >>>> > what my error
    >>>> > is........
    >>>> >
    >>>> > TIA,
    >>>> > Brian.
    >>>> >
    >>>> > * To join/leave the list, search archives, change list settings, *
    >>>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>> >
    >>>>
    >>>> * To join/leave the list, search archives, change list settings, *
    >>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>>
    >>>* To join/leave the list, search archives, change list settings, *
    >>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

    >>
    >>* To join/leave the list, search archives, change list settings, *
    >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    >>No virus found in this incoming message.
    >>Checked by AVG - http://www.avg.com
    >>Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >>6:43 AM
    >>
    >>* To join/leave the list, search archives, change list settings, *
    >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

    >
    >
    >No virus found in this incoming message.
    >Checked by AVG - http://www.avg.com
    >Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    >6:43 AM
    >
    >* To join/leave the list, search archives, change list settings, *
    >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


    * To join/leave the list, search archives, change list settings, *
    * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
    No virus found in this incoming message.
    Checked by AVG - http://www.avg.com
    Version: 8.0.138 / Virus Database: 270.6.2/1609 - Release Date: 8/13/2008
    6:43 AM

    * To join/leave the list, search archives, change list settings, *
    * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


+ Reply to Thread