Compaq BD01874554 (HP) disk drive jumpering diagram - Hewlett Packard

This is a discussion on Compaq BD01874554 (HP) disk drive jumpering diagram - Hewlett Packard ; I've had no luck finding such information on this drive -- I'd like to get it to spin up when power is applied rather than waiting for a SCSI Start Unit command and I'd prefer not to experiment. The mfr. ...

+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 24

Thread: Compaq BD01874554 (HP) disk drive jumpering diagram

  1. Compaq BD01874554 (HP) disk drive jumpering diagram

    I've had no luck finding such
    information on this drive --
    I'd like to get it to spin up
    when power is applied rather
    than waiting for a SCSI Start
    Unit command and I'd prefer
    not to experiment. The mfr.
    of record is HP, don't know
    the actual company of origin
    but I'm pretty sure the HP
    part number is 232574-003.
    Thanks in advance for any
    help or hints.



    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


  2. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    post a link to an image ... its likely either a seagate, quantum or western
    digital.

    - LC

    "Bruce Morgen" wrote in message
    news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    > I've had no luck finding such
    > information on this drive --
    > I'd like to get it to spin up
    > when power is applied rather
    > than waiting for a SCSI Start
    > Unit command and I'd prefer
    > not to experiment. The mfr.
    > of record is HP, don't know
    > the actual company of origin
    > but I'm pretty sure the HP
    > part number is 232574-003.
    > Thanks in advance for any
    > help or hints.
    >
    >
    >
    > .................................................. ..............
    > Posted via TITANnews - Uncensored Newsgroups Access
    > >>>> at http://www.TitanNews.com <<<<

    > -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
    >




  3. Re: Compaq BD01874554 (HP) disk drive jumpering diagram


    Can't find a decent one
    on the web -- might have
    to remove it and scan it
    on the label side. It's
    working fine as a data
    drive now, but because
    it's *so* much quieter
    on seeks than my ancient
    half-height Cheetah I
    want to swap their
    roles in system, hence
    the wish for immediate
    spin-up.

    "NuTCrAcKeR" wrote:

    >post a link to an image ... its likely either a seagate, quantum or western
    >digital.
    >
    >- LC
    >
    >"Bruce Morgen" wrote in message
    >news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >> I've had no luck finding such
    >> information on this drive --
    >> I'd like to get it to spin up
    >> when power is applied rather
    >> than waiting for a SCSI Start
    >> Unit command and I'd prefer
    >> not to experiment. The mfr.
    >> of record is HP, don't know
    >> the actual company of origin
    >> but I'm pretty sure the HP
    >> part number is 232574-003.
    >> Thanks in advance for any
    >> help or hints.
    >>
    >>
    >>
    >> .................................................. ..............
    >> Posted via TITANnews - Uncensored Newsgroups Access
    >> >>>> at http://www.TitanNews.com <<<<

    >> -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
    >>

    >





    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


  4. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    In message , Bruce Morgen
    writes

    apropos of nothing...
    >
    >Can't find a decent one
    >on the web -- might have
    >to remove it and scan it
    >on the label side. It's
    >working fine as a data
    >drive now, but because
    >it's *so* much quieter
    >on seeks than my ancient
    >half-height Cheetah I
    >want to swap their
    >roles in system, hence
    >the wish for immediate
    >spin-up.
    >
    >"NuTCrAcKeR" wrote:
    >
    >>post a link to an image ... its likely either a seagate, quantum or western
    >>digital.
    >>
    >>- LC
    >>
    >>"Bruce Morgen" wrote in message
    >>news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >>> I've had no luck finding such
    >>> information on this drive --
    >>> I'd like to get it to spin up
    >>> when power is applied rather
    >>> than waiting for a SCSI Start
    >>> Unit command and I'd prefer
    >>> not to experiment. The mfr.
    >>> of record is HP, don't know
    >>> the actual company of origin
    >>> but I'm pretty sure the HP
    >>> part number is 232574-003.
    >>> Thanks in advance for any
    >>> help or hints.
    >>>
    >>>
    >>>
    >>> .................................................. ..............
    >>> Posted via TITANnews - Uncensored Newsgroups Access
    >>> >>>> at http://www.TitanNews.com <<<<
    >>> -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
    >>>

    >>

    >
    >
    >
    >
    >.................................................. ..............
    > Posted via TITANnews - Uncensored Newsgroups Access
    > >>>> at http://www.TitanNews.com <<<<

    >-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
    >


    --
    Jeremy Boden

  5. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    "Jeremy Boden" wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    > In message , Bruce Morgen writes
    >
    > apropos of nothing...


    Yup, starts to stink more and more of a troll.

    > >
    > > Can't find a decent one
    > > on the web -- might have
    > > to remove it and scan it
    > > on the label side. It's
    > > working fine as a data
    > > drive now, but because
    > > it's *so* much quieter
    > > on seeks than my ancient
    > > half-height Cheetah I
    > > want to swap their
    > > roles in system, hence
    > > the wish for immediate
    > > spin-up.
    > >
    > > "NuTCrAcKeR" wrote:
    > >
    > > > post a link to an image ... its likely either a seagate, quantum or western digital.
    > > >
    > > > - LC
    > > >
    > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    > > > > I've had no luck finding such
    > > > > information on this drive --
    > > > > I'd like to get it to spin up
    > > > > when power is applied rather
    > > > > than waiting for a SCSI Start
    > > > > Unit command and I'd prefer
    > > > > not to experiment. The mfr.
    > > > > of record is HP, don't know
    > > > > the actual company of origin
    > > > > but I'm pretty sure the HP
    > > > > part number is 232574-003.
    > > > > Thanks in advance for any
    > > > > help or hints.
    > > > >



  6. Re: Compaq BD01874554 (HP) disk drive jumpering diagram


    Drop dead, Folkert --
    then again, live another
    century just as miserable
    as you've always been,
    that's a far more
    appropriate and richly
    deserved fate.


    "Folkert Rienstra" wrote:

    >"Jeremy Boden" wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >> In message , Bruce Morgen writes
    >>
    >> apropos of nothing...

    >
    >Yup, starts to stink more and more of a troll.
    >
    >> >
    >> > Can't find a decent one
    >> > on the web -- might have
    >> > to remove it and scan it
    >> > on the label side. It's
    >> > working fine as a data
    >> > drive now, but because
    >> > it's *so* much quieter
    >> > on seeks than my ancient
    >> > half-height Cheetah I
    >> > want to swap their
    >> > roles in system, hence
    >> > the wish for immediate
    >> > spin-up.
    >> >
    >> > "NuTCrAcKeR" wrote:
    >> >
    >> > > post a link to an image ... its likely either a seagate, quantum or western digital.
    >> > >
    >> > > - LC
    >> > >
    >> > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >> > > > I've had no luck finding such
    >> > > > information on this drive --
    >> > > > I'd like to get it to spin up
    >> > > > when power is applied rather
    >> > > > than waiting for a SCSI Start
    >> > > > Unit command and I'd prefer
    >> > > > not to experiment. The mfr.
    >> > > > of record is HP, don't know
    >> > > > the actual company of origin
    >> > > > but I'm pretty sure the HP
    >> > > > part number is 232574-003.
    >> > > > Thanks in advance for any
    >> > > > help or hints.
    >> > > >





    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


  7. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    the troll message was not directed toward you, bruce. get a clue before you
    rip somebody.

    -LC

    "Bruce Morgen" wrote in message
    news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >
    > Drop dead, Folkert --
    > then again, live another
    > century just as miserable
    > as you've always been,
    > that's a far more
    > appropriate and richly
    > deserved fate.
    >
    >
    > "Folkert Rienstra" wrote:
    >
    >>"Jeremy Boden" wrote in message
    >>news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >>> In message , Bruce Morgen
    >>> writes
    >>>
    >>> apropos of nothing...

    >>
    >>Yup, starts to stink more and more of a troll.
    >>
    >>> >
    >>> > Can't find a decent one
    >>> > on the web -- might have
    >>> > to remove it and scan it
    >>> > on the label side. It's
    >>> > working fine as a data
    >>> > drive now, but because
    >>> > it's *so* much quieter
    >>> > on seeks than my ancient
    >>> > half-height Cheetah I
    >>> > want to swap their
    >>> > roles in system, hence
    >>> > the wish for immediate
    >>> > spin-up.
    >>> >
    >>> > "NuTCrAcKeR" wrote:
    >>> >
    >>> > > post a link to an image ... its likely either a seagate, quantum or
    >>> > > western digital.
    >>> > >
    >>> > > - LC
    >>> > >
    >>> > > "Bruce Morgen" editor@juno.com> wrote in message
    >>> > > news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >>> > > > I've had no luck finding such
    >>> > > > information on this drive --
    >>> > > > I'd like to get it to spin up
    >>> > > > when power is applied rather
    >>> > > > than waiting for a SCSI Start
    >>> > > > Unit command and I'd prefer
    >>> > > > not to experiment. The mfr.
    >>> > > > of record is HP, don't know
    >>> > > > the actual company of origin
    >>> > > > but I'm pretty sure the HP
    >>> > > > part number is 232574-003.
    >>> > > > Thanks in advance for any
    >>> > > > help or hints.
    >>> > > >

    >
    >
    >
    >
    > .................................................. ..............
    > Posted via TITANnews - Uncensored Newsgroups Access
    > >>>> at http://www.TitanNews.com <<<<

    > -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
    >




  8. Re: Compaq BD01874554 (HP) disk drive jumpering diagram


    Well, in that case I
    apologize -- I'm sorry,
    Folkert, but you're still
    a very nasty (if very
    knowledgeable) poster.
    Moreover, Jeremy was
    right in that what I
    posted wasn't relevant,
    at least not directly --
    I was just trying to
    explain why I hadn't
    supplied the requested
    photo link and bothered
    the group(s) with my
    question in the first
    place. Mea culpa.

    "Nut Cracker" wrote:

    >the troll message was not directed toward you, bruce. get a clue before you
    >rip somebody.
    >
    >-LC
    >
    >"Bruce Morgen" wrote in message
    >news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >>
    >> Drop dead, Folkert --
    >> then again, live another
    >> century just as miserable
    >> as you've always been,
    >> that's a far more
    >> appropriate and richly
    >> deserved fate.
    >>
    >>
    >> "Folkert Rienstra" wrote:
    >>
    >>>"Jeremy Boden" wrote in message
    >>>news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >>>> In message , Bruce Morgen
    >>>> writes
    >>>>
    >>>> apropos of nothing...
    >>>
    >>>Yup, starts to stink more and more of a troll.
    >>>
    >>>> >
    >>>> > Can't find a decent one
    >>>> > on the web -- might have
    >>>> > to remove it and scan it
    >>>> > on the label side. It's
    >>>> > working fine as a data
    >>>> > drive now, but because
    >>>> > it's *so* much quieter
    >>>> > on seeks than my ancient
    >>>> > half-height Cheetah I
    >>>> > want to swap their
    >>>> > roles in system, hence
    >>>> > the wish for immediate
    >>>> > spin-up.
    >>>> >
    >>>> > "NuTCrAcKeR" wrote:
    >>>> >
    >>>> > > post a link to an image ... its likely either a seagate, quantum or
    >>>> > > western digital.
    >>>> > >
    >>>> > > - LC
    >>>> > >
    >>>> > > "Bruce Morgen" editor@juno.com> wrote in message
    >>>> > > news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >>>> > > > I've had no luck finding such
    >>>> > > > information on this drive --
    >>>> > > > I'd like to get it to spin up
    >>>> > > > when power is applied rather
    >>>> > > > than waiting for a SCSI Start
    >>>> > > > Unit command and I'd prefer
    >>>> > > > not to experiment. The mfr.
    >>>> > > > of record is HP, don't know
    >>>> > > > the actual company of origin
    >>>> > > > but I'm pretty sure the HP
    >>>> > > > part number is 232574-003.
    >>>> > > > Thanks in advance for any
    >>>> > > > help or hints.
    >>>> > > >

    >>
    >>
    >>
    >>
    >> .................................................. ..............
    >> Posted via TITANnews - Uncensored Newsgroups Access
    >> >>>> at http://www.TitanNews.com <<<<

    >> -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
    >>

    >





    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


  9. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    "Bruce Morgen" wrote in message news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    > Well, in that case I apologize -- I'm sorry, Folkert, but you're
    > still a very nasty (if very knowledgeable) poster.


    It wasn't a troll. It was a comment in agreement with Jeremy
    although very likely for different reasons.
    It's only a troll if you make it out as bait and hook yourself on it.

    > Moreover, Jeremy was right in that what I posted wasn't relevant,


    Your intention to post the label side, *that* was irrelevant.
    That won't help anything unless you deliberately lied about
    what there was to be gained from that label in your OP.

    > at least not directly -- I was just trying to explain why I hadn't
    > supplied the requested photo link


    > and bothered the group(s) with my question in the first place.


    Yes. It stinks an hour in the wind.
    Either you are to bloody lazy to look up the docs on hp.com -using
    the model number and partnumber (what else do you need) yourself-
    or you tried that already and know that that is going nowhere, but
    decided not to tell about it, and now laughing your head off knowing
    how the poor schlobs eager to please are now frantically trying to do
    what you already know doesn't work.

    Now that is the textbook definition of a real troll.

    > Mea culpa.


    Yeah right.

    >
    > "Nut Cracker" wrote:
    >
    > > the troll message was not directed toward you, bruce. get a clue before you
    > > rip somebody.
    > >
    > > -LC
    > >
    > > "Bruce Morgen" editor@juno.com> wrote in message news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    > > >
    > > > Drop dead, Folkert -- then again, live another century just as miserable
    > > > as you've always been, that's a far more appropriate and richly deserved fate.
    > > >
    > > > "Folkert Rienstra" wrote:
    > > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    > > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce Morgen writes
    > > > > >
    > > > > > apropos of nothing...
    > > > >
    > > > > Yup, starts to stink more and more of a troll.
    > > > >
    > > > > > >
    > > > > > > Can't find a decent one on the web -- might have to remove it and scan
    > > > > > > it on the label side. It's working fine as a data drive now, but because
    > > > > > > it's *so* much quieter on seeks than my ancient half-height Cheetah I
    > > > > > > want to swap their roles in system, hence the wish for immediate spin-up.
    > > > > > >
    > > > > > > "NuTCrAcKeR" wrote:
    > > > > > >
    > > > > > > > post a link to an image ... its likely either a seagate, quantum or
    > > > > > > > western digital.
    > > > > > > >
    > > > > > > > - LC
    > > > > > > >
    > > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    > > > > > > > > I've had no luck finding such information on this drive --
    > > > > > > > > I'd like to get it to spin up when power is applied rather
    > > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    > > > > > > > > not to experiment. The mfr. of record is HP, don't know
    > > > > > > > > the actual company of origin but I'm pretty sure the HP
    > > > > > > > > part number is 232574-003. Thanks in advance for any
    > > > > > > > > help or hints.
    > > > > > > > >
    > > >
    > > >



  10. Re: Compaq BD01874554 (HP) disk drive jumpering diagram


    You really figure hp.com
    would have such a diagram?
    That's a perfectly useful
    answer -- thanks, my luck
    at that site has been
    spotty at best, but I'll
    give it a try.

    However, my tentative
    offer to scan the label
    side was not a troll --
    someone more familiar with
    what various mfrs. drives
    look like might well be
    able to make an educated
    guess at an equivalent
    model for which there was
    a jumpering diagram by
    looking at it.

    Oh, and you're still a
    cranky old bastard, albeit
    a knowledgeable one.

    "Folkert Rienstra" wrote:

    >"Bruce Morgen" wrote in message news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    >> Well, in that case I apologize -- I'm sorry, Folkert, but you're
    >> still a very nasty (if very knowledgeable) poster.

    >
    >It wasn't a troll. It was a comment in agreement with Jeremy
    >although very likely for different reasons.
    >It's only a troll if you make it out as bait and hook yourself on it.
    >
    >> Moreover, Jeremy was right in that what I posted wasn't relevant,

    >
    >Your intention to post the label side, *that* was irrelevant.
    >That won't help anything unless you deliberately lied about
    >what there was to be gained from that label in your OP.
    >
    >> at least not directly -- I was just trying to explain why I hadn't
    >> supplied the requested photo link

    >
    >> and bothered the group(s) with my question in the first place.

    >
    >Yes. It stinks an hour in the wind.
    >Either you are to bloody lazy to look up the docs on hp.com -using
    >the model number and partnumber (what else do you need) yourself-
    >or you tried that already and know that that is going nowhere, but
    >decided not to tell about it, and now laughing your head off knowing
    >how the poor schlobs eager to please are now frantically trying to do
    >what you already know doesn't work.
    >
    >Now that is the textbook definition of a real troll.
    >
    >> Mea culpa.

    >
    >Yeah right.
    >
    >>
    >> "Nut Cracker" wrote:
    >>
    >> > the troll message was not directed toward you, bruce. get a clue before you
    >> > rip somebody.
    >> >
    >> > -LC
    >> >
    >> > "Bruce Morgen" editor@juno.com> wrote in message news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >> > >
    >> > > Drop dead, Folkert -- then again, live another century just as miserable
    >> > > as you've always been, that's a far more appropriate and richly deserved fate.
    >> > >
    >> > > "Folkert Rienstra" wrote:
    >> > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >> > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce Morgen writes
    >> > > > >
    >> > > > > apropos of nothing...
    >> > > >
    >> > > > Yup, starts to stink more and more of a troll.
    >> > > >
    >> > > > > >
    >> > > > > > Can't find a decent one on the web -- might have to remove it and scan
    >> > > > > > it on the label side. It's working fine as a data drive now, but because
    >> > > > > > it's *so* much quieter on seeks than my ancient half-height Cheetah I
    >> > > > > > want to swap their roles in system, hence the wish for immediate spin-up.
    >> > > > > >
    >> > > > > > "NuTCrAcKeR" wrote:
    >> > > > > >
    >> > > > > > > post a link to an image ... its likely either a seagate, quantum or
    >> > > > > > > western digital.
    >> > > > > > >
    >> > > > > > > - LC
    >> > > > > > >
    >> > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >> > > > > > > > I've had no luck finding such information on this drive --
    >> > > > > > > > I'd like to get it to spin up when power is applied rather
    >> > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    >> > > > > > > > not to experiment. The mfr. of record is HP, don't know
    >> > > > > > > > the actual company of origin but I'm pretty sure the HP
    >> > > > > > > > part number is 232574-003. Thanks in advance for any
    >> > > > > > > > help or hints.
    >> > > > > > > >
    >> > >
    >> > >





    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


  11. Re: Compaq BD01874554 (HP) disk drive jumpering diagram


    Just to follow up, just
    as I figured, there's
    no jumper information
    available via hp.com.

    "Folkert Rienstra" wrote:

    >"Bruce Morgen" wrote in message news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    >> Well, in that case I apologize -- I'm sorry, Folkert, but you're
    >> still a very nasty (if very knowledgeable) poster.

    >
    >It wasn't a troll. It was a comment in agreement with Jeremy
    >although very likely for different reasons.
    >It's only a troll if you make it out as bait and hook yourself on it.
    >
    >> Moreover, Jeremy was right in that what I posted wasn't relevant,

    >
    >Your intention to post the label side, *that* was irrelevant.
    >That won't help anything unless you deliberately lied about
    >what there was to be gained from that label in your OP.
    >
    >> at least not directly -- I was just trying to explain why I hadn't
    >> supplied the requested photo link

    >
    >> and bothered the group(s) with my question in the first place.

    >
    >Yes. It stinks an hour in the wind.
    >Either you are to bloody lazy to look up the docs on hp.com -using
    >the model number and partnumber (what else do you need) yourself-
    >or you tried that already and know that that is going nowhere, but
    >decided not to tell about it, and now laughing your head off knowing
    >how the poor schlobs eager to please are now frantically trying to do
    >what you already know doesn't work.
    >
    >Now that is the textbook definition of a real troll.
    >
    >> Mea culpa.

    >
    >Yeah right.
    >
    >>
    >> "Nut Cracker" wrote:
    >>
    >> > the troll message was not directed toward you, bruce. get a clue before you
    >> > rip somebody.
    >> >
    >> > -LC
    >> >
    >> > "Bruce Morgen" editor@juno.com> wrote in message news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >> > >
    >> > > Drop dead, Folkert -- then again, live another century just as miserable
    >> > > as you've always been, that's a far more appropriate and richly deserved fate.
    >> > >
    >> > > "Folkert Rienstra" wrote:
    >> > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >> > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce Morgen writes
    >> > > > >
    >> > > > > apropos of nothing...
    >> > > >
    >> > > > Yup, starts to stink more and more of a troll.
    >> > > >
    >> > > > > >
    >> > > > > > Can't find a decent one on the web -- might have to remove it and scan
    >> > > > > > it on the label side. It's working fine as a data drive now, but because
    >> > > > > > it's *so* much quieter on seeks than my ancient half-height Cheetah I
    >> > > > > > want to swap their roles in system, hence the wish for immediate spin-up.
    >> > > > > >
    >> > > > > > "NuTCrAcKeR" wrote:
    >> > > > > >
    >> > > > > > > post a link to an image ... its likely either a seagate, quantum or
    >> > > > > > > western digital.
    >> > > > > > >
    >> > > > > > > - LC
    >> > > > > > >
    >> > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >> > > > > > > > I've had no luck finding such information on this drive --
    >> > > > > > > > I'd like to get it to spin up when power is applied rather
    >> > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    >> > > > > > > > not to experiment. The mfr. of record is HP, don't know
    >> > > > > > > > the actual company of origin but I'm pretty sure the HP
    >> > > > > > > > part number is 232574-003. Thanks in advance for any
    >> > > > > > > > help or hints.
    >> > > > > > > >
    >> > >
    >> > >





    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


  12. Re: Compaq BD01874554 (HP) disk drive jumpering diagram


    Best photo I could find, and
    none to great:



    Any and all help appreciated!


    Bruce Morgen wrote:

    >
    >Just to follow up, just
    >as I figured, there's
    >no jumper information
    >available via hp.com.
    >
    >"Folkert Rienstra" wrote:
    >
    >>"Bruce Morgen" wrote in message news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    >>> Well, in that case I apologize -- I'm sorry, Folkert, but you're
    >>> still a very nasty (if very knowledgeable) poster.

    >>
    >>It wasn't a troll. It was a comment in agreement with Jeremy
    >>although very likely for different reasons.
    >>It's only a troll if you make it out as bait and hook yourself on it.
    >>
    >>> Moreover, Jeremy was right in that what I posted wasn't relevant,

    >>
    >>Your intention to post the label side, *that* was irrelevant.
    >>That won't help anything unless you deliberately lied about
    >>what there was to be gained from that label in your OP.
    >>
    >>> at least not directly -- I was just trying to explain why I hadn't
    >>> supplied the requested photo link

    >>
    >>> and bothered the group(s) with my question in the first place.

    >>
    >>Yes. It stinks an hour in the wind.
    >>Either you are to bloody lazy to look up the docs on hp.com -using
    >>the model number and partnumber (what else do you need) yourself-
    >>or you tried that already and know that that is going nowhere, but
    >>decided not to tell about it, and now laughing your head off knowing
    >>how the poor schlobs eager to please are now frantically trying to do
    >>what you already know doesn't work.
    >>
    >>Now that is the textbook definition of a real troll.
    >>
    >>> Mea culpa.

    >>
    >>Yeah right.
    >>
    >>>
    >>> "Nut Cracker" wrote:
    >>>
    >>> > the troll message was not directed toward you, bruce. get a clue before you
    >>> > rip somebody.
    >>> >
    >>> > -LC
    >>> >
    >>> > "Bruce Morgen" editor@juno.com> wrote in message news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >>> > >
    >>> > > Drop dead, Folkert -- then again, live another century just as miserable
    >>> > > as you've always been, that's a far more appropriate and richly deserved fate.
    >>> > >
    >>> > > "Folkert Rienstra" wrote:
    >>> > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >>> > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce Morgen writes
    >>> > > > >
    >>> > > > > apropos of nothing...
    >>> > > >
    >>> > > > Yup, starts to stink more and more of a troll.
    >>> > > >
    >>> > > > > >
    >>> > > > > > Can't find a decent one on the web -- might have to remove it and scan
    >>> > > > > > it on the label side. It's working fine as a data drive now, but because
    >>> > > > > > it's *so* much quieter on seeks than my ancient half-height Cheetah I
    >>> > > > > > want to swap their roles in system, hence the wish for immediate spin-up.
    >>> > > > > >
    >>> > > > > > "NuTCrAcKeR" wrote:
    >>> > > > > >
    >>> > > > > > > post a link to an image ... its likely either a seagate, quantum or
    >>> > > > > > > western digital.
    >>> > > > > > >
    >>> > > > > > > - LC
    >>> > > > > > >
    >>> > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >>> > > > > > > > I've had no luck finding such information on this drive --
    >>> > > > > > > > I'd like to get it to spin up when power is applied rather
    >>> > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    >>> > > > > > > > not to experiment. The mfr. of record is HP, don't know
    >>> > > > > > > > the actual company of origin but I'm pretty sure the HP
    >>> > > > > > > > part number is 232574-003. Thanks in advance for any
    >>> > > > > > > > help or hints.
    >>> > > > > > > >
    >>> > >
    >>> > >

    >
    >
    >
    >
    >.................................................. ..............
    > Posted via TITANnews - Uncensored Newsgroups Access
    > >>>> at http://www.TitanNews.com <<<<

    >-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-





    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


  13. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    "Bruce Morgen" wrote in message news:qbhdv1tleepg76adqaoqgvojn1fn2unb0k@4ax.com
    > Best photo I could find,


    And even there you didn't take a lousy 10 minutes or you would have easily found this one:

    http://imagehost.vendio.com/bin/view...0c5-d0af1&sp=1

    You can almost read the label word for word.

    > and none to great:


    But good enough to call you a lying and desceiving TROLL.

    >
    >
    >
    > Any and all help appreciated!


    That's clearly a Seagate and it has the standard jumper diagrams
    -as with all Seagate drives whether COMPAQ or IBM OEMs-
    clearly printed on the label.

    Nothing like: " I've had no luck finding such information on this drive "

    It very clearly says on the left diagram in no uncertain terms

    MOTOR START ENABLE for the 3rd jumper from below.

    It doesn't take a rocket scientist to find out what that jum-
    per does or whether is should be jumpered or unjumpered.
    If jumpered then unjumper, if unjumpered, then jumper for
    the desired result.

    How bloody difficult can it be.

    >
    >
    > Bruce Morgen wrote:
    >
    > >
    > > Just to follow up, just as I figured, there's
    > > no jumper information available via hp.com.


    Yes, that's what I said, didn't I.

    But thanks for confirming that you are indeed god
    awful lazy and that your post was indeed a troll.

    > >
    > > "Folkert Rienstra" wrote:
    > >
    > > > "Bruce Morgen" wrote in message news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    > > > > Well, in that case I apologize -- I'm sorry, Folkert, but you're
    > > > > still a very nasty (if very knowledgeable) poster.
    > > >
    > > > It wasn't a troll. It was a comment in agreement with Jeremy
    > > > although very likely for different reasons.
    > > > It's only a troll if you make it out as bait and hook yourself on it.
    > > >
    > > > > Moreover, Jeremy was right in that what I posted wasn't relevant,
    > > >
    > > > Your intention to post the label side, *that* was irrelevant.
    > > > That won't help anything unless you deliberately lied about
    > > > what there was to be gained from that label in your OP.


    So I will now officially call you a LIAR and TROLL.

    > > >
    > > > > at least not directly -- I was just trying to explain why I hadn't
    > > > > supplied the requested photo link
    > > >
    > > > > and bothered the group(s) with my question in the first place.
    > > >
    > > > Yes. It stinks an hour in the wind.
    > > > Either you are to bloody lazy to look up the docs on hp.com -using
    > > > the model number and partnumber (what else do you need) yourself-
    > > > or you tried that already and know that that is going nowhere, but
    > > > decided not to tell about it, and now laughing your head off knowing
    > > > how the poor schlobs eager to please are now frantically trying to do
    > > > what you already know doesn't work.
    > > >
    > > > Now that is the textbook definition of a real troll.
    > > >
    > > > > Mea culpa.
    > > >
    > > > Yeah right.
    > > >
    > > > >
    > > > > "Nut Cracker" wrote:
    > > > >
    > > > > > the troll message was not directed toward you, bruce. get a clue before you
    > > > > > rip somebody.
    > > > > >
    > > > > > -LC
    > > > > >
    > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    > > > > > >
    > > > > > > Drop dead, Folkert -- then again, live another century just as miserable
    > > > > > > as you've always been, that's a far more appropriate and richly deserved fate.
    > > > > > >
    > > > > > > "Folkert Rienstra" wrote:
    > > > > > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    > > > > > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce Morgen writes
    > > > > > > > >
    > > > > > > > > apropos of nothing...
    > > > > > > >
    > > > > > > > Yup, starts to stink more and more of a troll.
    > > > > > > >
    > > > > > > > > >
    > > > > > > > > > Can't find a decent one on the web -- might have to remove it and scan
    > > > > > > > > > it on the label side. It's working fine as a data drive now, but because
    > > > > > > > > > it's *so* much quieter on seeks than my ancient half-height Cheetah I
    > > > > > > > > > want to swap their roles in system, hence the wish for immediate spin-up.
    > > > > > > > > >
    > > > > > > > > > "NuTCrAcKeR" wrote:
    > > > > > > > > >
    > > > > > > > > > > post a link to an image ... its likely either a seagate, quantum or
    > > > > > > > > > > western digital.
    > > > > > > > > > >
    > > > > > > > > > > - LC
    > > > > > > > > > >
    > > > > > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    > > > > > > > > > > > I've had no luck finding such information on this drive --
    > > > > > > > > > > > I'd like to get it to spin up when power is applied rather
    > > > > > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    > > > > > > > > > > > not to experiment. The mfr. of record is HP, don't know
    > > > > > > > > > > > the actual company of origin but I'm pretty sure the HP
    > > > > > > > > > > > part number is 232574-003. Thanks in advance for any
    > > > > > > > > > > > help or hints.
    > > > > > > > > > > >
    > > > > > >
    > > > > > >



  14. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    Bruce, if yours has the same label on the top as the one in the picture,
    then you have your dumpering diagram you have been asking for. its printed
    right on the label.

    im starting to think yer a douche bag ...

    - LC

    "Bruce Morgen" wrote in message
    news:qbhdv1tleepg76adqaoqgvojn1fn2unb0k@4ax.com...
    >
    > Best photo I could find, and
    > none to great:
    >
    >
    >
    > Any and all help appreciated!
    >
    >
    > Bruce Morgen wrote:
    >
    >>
    >>Just to follow up, just
    >>as I figured, there's
    >>no jumper information
    >>available via hp.com.
    >>
    >>"Folkert Rienstra" wrote:
    >>
    >>>"Bruce Morgen" wrote in message
    >>>news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    >>>> Well, in that case I apologize -- I'm sorry, Folkert, but you're
    >>>> still a very nasty (if very knowledgeable) poster.
    >>>
    >>>It wasn't a troll. It was a comment in agreement with Jeremy
    >>>although very likely for different reasons.
    >>>It's only a troll if you make it out as bait and hook yourself on it.
    >>>
    >>>> Moreover, Jeremy was right in that what I posted wasn't relevant,
    >>>
    >>>Your intention to post the label side, *that* was irrelevant.
    >>>That won't help anything unless you deliberately lied about
    >>>what there was to be gained from that label in your OP.
    >>>
    >>>> at least not directly -- I was just trying to explain why I hadn't
    >>>> supplied the requested photo link
    >>>
    >>>> and bothered the group(s) with my question in the first place.
    >>>
    >>>Yes. It stinks an hour in the wind.
    >>>Either you are to bloody lazy to look up the docs on hp.com -using
    >>>the model number and partnumber (what else do you need) yourself-
    >>>or you tried that already and know that that is going nowhere, but
    >>>decided not to tell about it, and now laughing your head off knowing
    >>>how the poor schlobs eager to please are now frantically trying to do
    >>>what you already know doesn't work.
    >>>
    >>>Now that is the textbook definition of a real troll.
    >>>
    >>>> Mea culpa.
    >>>
    >>>Yeah right.
    >>>
    >>>>
    >>>> "Nut Cracker" wrote:
    >>>>
    >>>> > the troll message was not directed toward you, bruce. get a clue
    >>>> > before you
    >>>> > rip somebody.
    >>>> >
    >>>> > -LC
    >>>> >
    >>>> > "Bruce Morgen" editor@juno.com> wrote in message
    >>>> > news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >>>> > >
    >>>> > > Drop dead, Folkert -- then again, live another century just as
    >>>> > > miserable
    >>>> > > as you've always been, that's a far more appropriate and richly
    >>>> > > deserved fate.
    >>>> > >
    >>>> > > "Folkert Rienstra" wrote:
    >>>> > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message
    >>>> > > > news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >>>> > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce
    >>>> > > > > Morgen writes
    >>>> > > > >
    >>>> > > > > apropos of nothing...
    >>>> > > >
    >>>> > > > Yup, starts to stink more and more of a troll.
    >>>> > > >
    >>>> > > > > >
    >>>> > > > > > Can't find a decent one on the web -- might have to remove it
    >>>> > > > > > and scan
    >>>> > > > > > it on the label side. It's working fine as a data drive now,
    >>>> > > > > > but because
    >>>> > > > > > it's *so* much quieter on seeks than my ancient half-height
    >>>> > > > > > Cheetah I
    >>>> > > > > > want to swap their roles in system, hence the wish for
    >>>> > > > > > immediate spin-up.
    >>>> > > > > >
    >>>> > > > > > "NuTCrAcKeR" wrote:
    >>>> > > > > >
    >>>> > > > > > > post a link to an image ... its likely either a seagate,
    >>>> > > > > > > quantum or
    >>>> > > > > > > western digital.
    >>>> > > > > > >
    >>>> > > > > > > - LC
    >>>> > > > > > >
    >>>> > > > > > > "Bruce Morgen" editor@juno.com> wrote in message
    >>>> > > > > > > news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >>>> > > > > > > > I've had no luck finding such information on this
    >>>> > > > > > > > drive --
    >>>> > > > > > > > I'd like to get it to spin up when power is applied
    >>>> > > > > > > > rather
    >>>> > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    >>>> > > > > > > > not to experiment. The mfr. of record is HP, don't know
    >>>> > > > > > > > the actual company of origin but I'm pretty sure the HP
    >>>> > > > > > > > part number is 232574-003. Thanks in advance for any
    >>>> > > > > > > > help or hints.
    >>>> > > > > > > >
    >>>> > >
    >>>> > >

    >>
    >>
    >>
    >>
    >>.................................................. ..............
    >> Posted via TITANnews - Uncensored Newsgroups Access
    >> >>>> at http://www.TitanNews.com <<<<

    >>-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-

    >
    >
    >
    >
    > .................................................. ..............
    > Posted via TITANnews - Uncensored Newsgroups Access
    > >>>> at http://www.TitanNews.com <<<<

    > -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
    >




  15. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    I have nothing to say...I just wanted to jump in here somewhere.


  16. Re: Compaq BD01874554 (HP) disk drive jumpering diagram


    "Jeffrey Alsip" wrote in message
    news:1140286303.906287.137830@o13g2000cwo.googlegr oups.com...
    >I have nothing to say...I just wanted to jump in here somewhere.
    >


    Ah, welcome Jeffrey.

    Glad you could join us



  17. Re: Compaq BD01874554 (HP) disk drive jumpering diagram


    I wanted to know beforehand
    -- but it turns out I had to
    open the box anyway (to swap
    out a CD-R), and some jumper
    information was on the label,
    but with no indication of
    what the sense of that
    jumper was. However, since
    the drive wasn't spinning up
    and a jumper was in place,
    the obvious solution was to
    remove it, which worked fine.
    Problem solved, thanks for
    the help and the mockery,
    it's all grist for the mill.

    "NuTCrAcKeR" wrote:

    >Bruce, if yours has the same label on the top as the one in the picture,
    >then you have your dumpering diagram you have been asking for. its printed
    >right on the label.
    >
    >im starting to think yer a douche bag ...
    >
    >- LC
    >
    >"Bruce Morgen" wrote in message
    >news:qbhdv1tleepg76adqaoqgvojn1fn2unb0k@4ax.com...
    >>
    >> Best photo I could find, and
    >> none to great:
    >>
    >>
    >>
    >> Any and all help appreciated!
    >>
    >>
    >> Bruce Morgen wrote:
    >>
    >>>
    >>>Just to follow up, just
    >>>as I figured, there's
    >>>no jumper information
    >>>available via hp.com.
    >>>
    >>>"Folkert Rienstra" wrote:
    >>>
    >>>>"Bruce Morgen" wrote in message
    >>>>news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    >>>>> Well, in that case I apologize -- I'm sorry, Folkert, but you're
    >>>>> still a very nasty (if very knowledgeable) poster.
    >>>>
    >>>>It wasn't a troll. It was a comment in agreement with Jeremy
    >>>>although very likely for different reasons.
    >>>>It's only a troll if you make it out as bait and hook yourself on it.
    >>>>
    >>>>> Moreover, Jeremy was right in that what I posted wasn't relevant,
    >>>>
    >>>>Your intention to post the label side, *that* was irrelevant.
    >>>>That won't help anything unless you deliberately lied about
    >>>>what there was to be gained from that label in your OP.
    >>>>
    >>>>> at least not directly -- I was just trying to explain why I hadn't
    >>>>> supplied the requested photo link
    >>>>
    >>>>> and bothered the group(s) with my question in the first place.
    >>>>
    >>>>Yes. It stinks an hour in the wind.
    >>>>Either you are to bloody lazy to look up the docs on hp.com -using
    >>>>the model number and partnumber (what else do you need) yourself-
    >>>>or you tried that already and know that that is going nowhere, but
    >>>>decided not to tell about it, and now laughing your head off knowing
    >>>>how the poor schlobs eager to please are now frantically trying to do
    >>>>what you already know doesn't work.
    >>>>
    >>>>Now that is the textbook definition of a real troll.
    >>>>
    >>>>> Mea culpa.
    >>>>
    >>>>Yeah right.
    >>>>
    >>>>>
    >>>>> "Nut Cracker" wrote:
    >>>>>
    >>>>> > the troll message was not directed toward you, bruce. get a clue
    >>>>> > before you
    >>>>> > rip somebody.
    >>>>> >
    >>>>> > -LC
    >>>>> >
    >>>>> > "Bruce Morgen" editor@juno.com> wrote in message
    >>>>> > news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >>>>> > >
    >>>>> > > Drop dead, Folkert -- then again, live another century just as
    >>>>> > > miserable
    >>>>> > > as you've always been, that's a far more appropriate and richly
    >>>>> > > deserved fate.
    >>>>> > >
    >>>>> > > "Folkert Rienstra" wrote:
    >>>>> > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message
    >>>>> > > > news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >>>>> > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce
    >>>>> > > > > Morgen writes
    >>>>> > > > >
    >>>>> > > > > apropos of nothing...
    >>>>> > > >
    >>>>> > > > Yup, starts to stink more and more of a troll.
    >>>>> > > >
    >>>>> > > > > >
    >>>>> > > > > > Can't find a decent one on the web -- might have to remove it
    >>>>> > > > > > and scan
    >>>>> > > > > > it on the label side. It's working fine as a data drive now,
    >>>>> > > > > > but because
    >>>>> > > > > > it's *so* much quieter on seeks than my ancient half-height
    >>>>> > > > > > Cheetah I
    >>>>> > > > > > want to swap their roles in system, hence the wish for
    >>>>> > > > > > immediate spin-up.
    >>>>> > > > > >
    >>>>> > > > > > "NuTCrAcKeR" wrote:
    >>>>> > > > > >
    >>>>> > > > > > > post a link to an image ... its likely either a seagate,
    >>>>> > > > > > > quantum or
    >>>>> > > > > > > western digital.
    >>>>> > > > > > >
    >>>>> > > > > > > - LC
    >>>>> > > > > > >
    >>>>> > > > > > > "Bruce Morgen" editor@juno.com> wrote in message
    >>>>> > > > > > > news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >>>>> > > > > > > > I've had no luck finding such information on this
    >>>>> > > > > > > > drive --
    >>>>> > > > > > > > I'd like to get it to spin up when power is applied
    >>>>> > > > > > > > rather
    >>>>> > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    >>>>> > > > > > > > not to experiment. The mfr. of record is HP, don't know
    >>>>> > > > > > > > the actual company of origin but I'm pretty sure the HP
    >>>>> > > > > > > > part number is 232574-003. Thanks in advance for any
    >>>>> > > > > > > > help or hints.
    >>>>> > > > > > > >
    >>>>> > >
    >>>>> > >
    >>>
    >>>
    >>>
    >>>
    >>>.................................................. ..............
    >>> Posted via TITANnews - Uncensored Newsgroups Access
    >>> >>>> at http://www.TitanNews.com <<<<
    >>>-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-

    >>
    >>
    >>
    >>
    >> .................................................. ..............
    >> Posted via TITANnews - Uncensored Newsgroups Access
    >> >>>> at http://www.TitanNews.com <<<<

    >> -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
    >>

    >





    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


  18. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    Wow, almost two weeks to come up with such a lousy
    excuse and obvious lie. You are indeed a douche bag.

    "Bruce Morgen" wrote in message news:707c02hq5vqtchg2meiooimp03552grqq2@4ax.com
    >
    > I wanted to know beforehand but it turns out I had to
    > open the box anyway


    Like you wouldn't have to do that to look up the info on
    the label or to swap a jumper.

    > (to swap out a CD-R),


    > and some jumper information was on the label,


    So much for:
    "I've had no luck finding such information on this drive"

    > but with no indication of what the sense of that jumper was.


    Yes obviously there are 4 different ways to set it and 9 to remove.

    > However, since the drive wasn't spinning up and a jumper was in
    > place, the obvious solution was to remove it, which worked fine.


    No, really?

    > Problem solved, thanks for the help and the mockery,


    > it's all grist for the mill.


    Yup, other words for troll bait.

    >
    > "NuTCrAcKeR" wrote:
    >
    > > Bruce, if yours has the same label on the top as the one in the picture,
    > > then you have your jumpering diagram you have been asking for. its printed
    > > right on the label.
    > >
    > > im starting to think yer a douche bag ...
    > >
    > > - LC
    > >
    > > "Bruce Morgen" editor@juno.com> wrote in message news:qbhdv1tleepg76adqaoqgvojn1fn2unb0k@4ax.com...
    > > >
    > > > Best photo I could find, and none to great:
    > > >
    > > >
    > > >
    > > > Any and all help appreciated!
    > > >
    > > >
    > > > Bruce Morgen wrote:
    > > >
    > > > >
    > > > > Just to follow up, just as I figured, there's
    > > > > no jumper information available via hp.com.
    > > > >
    > > > > "Folkert Rienstra" wrote:
    > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    > > > > > > Well, in that case I apologize -- I'm sorry, Folkert, but you're
    > > > > > > still a very nasty (if very knowledgeable) poster.
    > > > > >
    > > > > > It wasn't a troll. It was a comment in agreement with Jeremy
    > > > > > although very likely for different reasons.
    > > > > > It's only a troll if you make it out as bait and hook yourself on it.
    > > > > >
    > > > > > > Moreover, Jeremy was right in that what I posted wasn't relevant,
    > > > > >
    > > > > > Your intention to post the label side, *that* was irrelevant.
    > > > > > That won't help anything unless you deliberately lied about
    > > > > > what there was to be gained from that label in your OP.
    > > > > >
    > > > > > > at least not directly -- I was just trying to explain why I hadn't
    > > > > > > supplied the requested photo link
    > > > > >
    > > > > > > and bothered the group(s) with my question in the first place.
    > > > > >
    > > > > > Yes. It stinks an hour in the wind.
    > > > > > Either you are to bloody lazy to look up the docs on hp.com -using
    > > > > > the model number and partnumber (what else do you need) yourself-
    > > > > > or you tried that already and know that that is going nowhere, but
    > > > > > decided not to tell about it, and now laughing your head off knowing
    > > > > > how the poor schlobs eager to please are now frantically trying to do
    > > > > > what you already know doesn't work.
    > > > > >
    > > > > > Now that is the textbook definition of a real troll.
    > > > > >
    > > > > > > Mea culpa.
    > > > > >
    > > > > > Yeah right.
    > > > > >
    > > > > > >
    > > > > > > "Nut Cracker" wrote:
    > > > > > >
    > > > > > > > the troll message was not directed toward you, bruce. get a clue
    > > > > > > > before you rip somebody.
    > > > > > > >
    > > > > > > > -LC
    > > > > > > >
    > > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    > > > > > > > >
    > > > > > > > > Drop dead, Folkert -- then again, live another century just as miserable
    > > > > > > > > as you've always been, that's a far more appropriate and richly deserved fate.
    > > > > > > > >
    > > > > > > > > "Folkert Rienstra" wrote:
    > > > > > > > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    > > > > > > > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce Morgen writes
    > > > > > > > > > >
    > > > > > > > > > > apropos of nothing...
    > > > > > > > > >
    > > > > > > > > > Yup, starts to stink more and more of a troll.
    > > > > > > > > >
    > > > > > > > > > > >
    > > > > > > > > > > > Can't find a decent one on the web -- might have to remove it and scan
    > > > > > > > > > > > it on the label side. It's working fine as a data drive now, but because
    > > > > > > > > > > > it's *so* much quieter on seeks than my ancient half-height Cheetah I
    > > > > > > > > > > > want to swap their roles in system, hence the wish for immediate spin-up.
    > > > > > > > > > > >
    > > > > > > > > > > > "NuTCrAcKeR" wrote:
    > > > > > > > > > > >
    > > > > > > > > > > > > post a link to an image ... its likely either a seagate, quantum or
    > > > > > > > > > > > > western digital.
    > > > > > > > > > > > >
    > > > > > > > > > > > > - LC
    > > > > > > > > > > > >
    > > > > > > > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    > > > > > > > > > > > > > I've had no luck finding such information on this drive --
    > > > > > > > > > > > > > I'd like to get it to spin up when power is applied rather
    > > > > > > > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    > > > > > > > > > > > > > not to experiment. The mfr. of record is HP, don't know
    > > > > > > > > > > > > > the actual company of origin but I'm pretty sure the HP
    > > > > > > > > > > > > > part number is 232574-003. Thanks in advance for any
    > > > > > > > > > > > > > help or hints.
    > > > > > > > > > > > > >
    > > > > > > > >



  19. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    Twit!

    On Thu, 2 Mar 2006 00:10:08 +0100, "Folkert Rienstra"
    wrote:

    >Wow, almost two weeks to come up with such a lousy
    >excuse and obvious lie. You are indeed a douche bag.
    >
    >"Bruce Morgen" wrote in message news:707c02hq5vqtchg2meiooimp03552grqq2@4ax.com
    >>
    >> I wanted to know beforehand but it turns out I had to
    >> open the box anyway

    >
    >Like you wouldn't have to do that to look up the info on
    >the label or to swap a jumper.
    >
    >> (to swap out a CD-R),

    >
    >> and some jumper information was on the label,

    >
    >So much for:
    >"I've had no luck finding such information on this drive"
    >
    >> but with no indication of what the sense of that jumper was.

    >
    >Yes obviously there are 4 different ways to set it and 9 to remove.
    >
    >> However, since the drive wasn't spinning up and a jumper was in
    >> place, the obvious solution was to remove it, which worked fine.

    >
    >No, really?
    >
    >> Problem solved, thanks for the help and the mockery,

    >
    >> it's all grist for the mill.

    >
    >Yup, other words for troll bait.
    >
    >>
    >> "NuTCrAcKeR" wrote:
    >>
    >> > Bruce, if yours has the same label on the top as the one in the picture,
    >> > then you have your jumpering diagram you have been asking for. its printed
    >> > right on the label.
    >> >
    >> > im starting to think yer a douche bag ...
    >> >
    >> > - LC
    >> >
    >> > "Bruce Morgen" editor@juno.com> wrote in message news:qbhdv1tleepg76adqaoqgvojn1fn2unb0k@4ax.com...
    >> > >
    >> > > Best photo I could find, and none to great:
    >> > >
    >> > >
    >> > >
    >> > > Any and all help appreciated!
    >> > >
    >> > >
    >> > > Bruce Morgen wrote:
    >> > >
    >> > > >
    >> > > > Just to follow up, just as I figured, there's
    >> > > > no jumper information available via hp.com.
    >> > > >
    >> > > > "Folkert Rienstra" wrote:
    >> > > > > "Bruce Morgen" editor@juno.com> wrote in message news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    >> > > > > > Well, in that case I apologize -- I'm sorry, Folkert, but you're
    >> > > > > > still a very nasty (if very knowledgeable) poster.
    >> > > > >
    >> > > > > It wasn't a troll. It was a comment in agreement with Jeremy
    >> > > > > although very likely for different reasons.
    >> > > > > It's only a troll if you make it out as bait and hook yourself on it.
    >> > > > >
    >> > > > > > Moreover, Jeremy was right in that what I posted wasn't relevant,
    >> > > > >
    >> > > > > Your intention to post the label side, *that* was irrelevant.
    >> > > > > That won't help anything unless you deliberately lied about
    >> > > > > what there was to be gained from that label in your OP.
    >> > > > >
    >> > > > > > at least not directly -- I was just trying to explain why I hadn't
    >> > > > > > supplied the requested photo link
    >> > > > >
    >> > > > > > and bothered the group(s) with my question in the first place.
    >> > > > >
    >> > > > > Yes. It stinks an hour in the wind.
    >> > > > > Either you are to bloody lazy to look up the docs on hp.com -using
    >> > > > > the model number and partnumber (what else do you need) yourself-
    >> > > > > or you tried that already and know that that is going nowhere, but
    >> > > > > decided not to tell about it, and now laughing your head off knowing
    >> > > > > how the poor schlobs eager to please are now frantically trying to do
    >> > > > > what you already know doesn't work.
    >> > > > >
    >> > > > > Now that is the textbook definition of a real troll.
    >> > > > >
    >> > > > > > Mea culpa.
    >> > > > >
    >> > > > > Yeah right.
    >> > > > >
    >> > > > > >
    >> > > > > > "Nut Cracker" wrote:
    >> > > > > >
    >> > > > > > > the troll message was not directed toward you, bruce. get a clue
    >> > > > > > > before you rip somebody.
    >> > > > > > >
    >> > > > > > > -LC
    >> > > > > > >
    >> > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >> > > > > > > >
    >> > > > > > > > Drop dead, Folkert -- then again, live another century just as miserable
    >> > > > > > > > as you've always been, that's a far more appropriate and richly deserved fate.
    >> > > > > > > >
    >> > > > > > > > "Folkert Rienstra" wrote:
    >> > > > > > > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >> > > > > > > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce Morgen writes
    >> > > > > > > > > >
    >> > > > > > > > > > apropos of nothing...
    >> > > > > > > > >
    >> > > > > > > > > Yup, starts to stink more and more of a troll.
    >> > > > > > > > >
    >> > > > > > > > > > >
    >> > > > > > > > > > > Can't find a decent one on the web -- might have to remove it and scan
    >> > > > > > > > > > > it on the label side. It's working fine as a data drive now, but because
    >> > > > > > > > > > > it's *so* much quieter on seeks than my ancient half-height Cheetah I
    >> > > > > > > > > > > want to swap their roles in system, hence the wish for immediate spin-up.
    >> > > > > > > > > > >
    >> > > > > > > > > > > "NuTCrAcKeR" wrote:
    >> > > > > > > > > > >
    >> > > > > > > > > > > > post a link to an image ... its likely either a seagate, quantum or
    >> > > > > > > > > > > > western digital.
    >> > > > > > > > > > > >
    >> > > > > > > > > > > > - LC
    >> > > > > > > > > > > >
    >> > > > > > > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >> > > > > > > > > > > > > I've had no luck finding such information on this drive --
    >> > > > > > > > > > > > > I'd like to get it to spin up when power is applied rather
    >> > > > > > > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    >> > > > > > > > > > > > > not to experiment. The mfr. of record is HP, don't know
    >> > > > > > > > > > > > > the actual company of origin but I'm pretty sure the HP
    >> > > > > > > > > > > > > part number is 232574-003. Thanks in advance for any
    >> > > > > > > > > > > > > help or hints.
    >> > > > > > > > > > > > >
    >> > > > > > > >



  20. Re: Compaq BD01874554 (HP) disk drive jumpering diagram

    "Folkert Rienstra" wrote:

    >Wow, almost two weeks to come up with such a lousy
    >excuse and obvious lie. You are indeed a douche bag.


    **** you, Folkert --
    whatever I may be, I'm
    truly blessed not to be as
    miserable as you surely
    must be. As a matter of
    fact, it took two weeks
    until the CD-R failed --
    if you want proof, PayPal
    me $50 USD and I'll send
    the thing to you, it'll
    make a great paperweight.
    >
    >"Bruce Morgen" wrote in message news:707c02hq5vqtchg2meiooimp03552grqq2@4ax.com
    >>
    >> I wanted to know beforehand but it turns out I had to
    >> open the box anyway

    >
    >Like you wouldn't have to do that to look up the info on
    >the label or to swap a jumper.
    >
    >> (to swap out a CD-R),

    >
    >> and some jumper information was on the label,

    >
    >So much for:
    >"I've had no luck finding such information on this drive"
    >
    >> but with no indication of what the sense of that jumper was.

    >
    >Yes obviously there are 4 different ways to set it and 9 to remove.
    >
    >> However, since the drive wasn't spinning up and a jumper was in
    >> place, the obvious solution was to remove it, which worked fine.

    >
    >No, really?
    >
    >> Problem solved, thanks for the help and the mockery,

    >
    >> it's all grist for the mill.

    >
    >Yup, other words for troll bait.
    >
    >>
    >> "NuTCrAcKeR" wrote:
    >>
    >> > Bruce, if yours has the same label on the top as the one in the picture,
    >> > then you have your jumpering diagram you have been asking for. its printed
    >> > right on the label.
    >> >
    >> > im starting to think yer a douche bag ...
    >> >
    >> > - LC
    >> >
    >> > "Bruce Morgen" editor@juno.com> wrote in message news:qbhdv1tleepg76adqaoqgvojn1fn2unb0k@4ax.com...
    >> > >
    >> > > Best photo I could find, and none to great:
    >> > >
    >> > >
    >> > >
    >> > > Any and all help appreciated!
    >> > >
    >> > >
    >> > > Bruce Morgen wrote:
    >> > >
    >> > > >
    >> > > > Just to follow up, just as I figured, there's
    >> > > > no jumper information available via hp.com.
    >> > > >
    >> > > > "Folkert Rienstra" wrote:
    >> > > > > "Bruce Morgen" editor@juno.com> wrote in message news:kmv9v1pa5dou4pte0pdn8dlddv14eslc4t@4ax.com
    >> > > > > > Well, in that case I apologize -- I'm sorry, Folkert, but you're
    >> > > > > > still a very nasty (if very knowledgeable) poster.
    >> > > > >
    >> > > > > It wasn't a troll. It was a comment in agreement with Jeremy
    >> > > > > although very likely for different reasons.
    >> > > > > It's only a troll if you make it out as bait and hook yourself on it.
    >> > > > >
    >> > > > > > Moreover, Jeremy was right in that what I posted wasn't relevant,
    >> > > > >
    >> > > > > Your intention to post the label side, *that* was irrelevant.
    >> > > > > That won't help anything unless you deliberately lied about
    >> > > > > what there was to be gained from that label in your OP.
    >> > > > >
    >> > > > > > at least not directly -- I was just trying to explain why I hadn't
    >> > > > > > supplied the requested photo link
    >> > > > >
    >> > > > > > and bothered the group(s) with my question in the first place.
    >> > > > >
    >> > > > > Yes. It stinks an hour in the wind.
    >> > > > > Either you are to bloody lazy to look up the docs on hp.com -using
    >> > > > > the model number and partnumber (what else do you need) yourself-
    >> > > > > or you tried that already and know that that is going nowhere, but
    >> > > > > decided not to tell about it, and now laughing your head off knowing
    >> > > > > how the poor schlobs eager to please are now frantically trying to do
    >> > > > > what you already know doesn't work.
    >> > > > >
    >> > > > > Now that is the textbook definition of a real troll.
    >> > > > >
    >> > > > > > Mea culpa.
    >> > > > >
    >> > > > > Yeah right.
    >> > > > >
    >> > > > > >
    >> > > > > > "Nut Cracker" wrote:
    >> > > > > >
    >> > > > > > > the troll message was not directed toward you, bruce. get a clue
    >> > > > > > > before you rip somebody.
    >> > > > > > >
    >> > > > > > > -LC
    >> > > > > > >
    >> > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:mdp9v11rkq8m1182b628foss073ffe47s3@4ax.com...
    >> > > > > > > >
    >> > > > > > > > Drop dead, Folkert -- then again, live another century just as miserable
    >> > > > > > > > as you've always been, that's a far more appropriate and richly deserved fate.
    >> > > > > > > >
    >> > > > > > > > "Folkert Rienstra" wrote:
    >> > > > > > > > > "Jeremy Boden" jeremy@jboden.demon.co.uk> wrote in message news:gQhrDXAAe78DFwiS@jboden.demon.co.uk
    >> > > > > > > > > > In message hr67v1tnjhbj1ra0e92re1bemkph2g37fu@4ax.com>, Bruce Morgen writes
    >> > > > > > > > > >
    >> > > > > > > > > > apropos of nothing...
    >> > > > > > > > >
    >> > > > > > > > > Yup, starts to stink more and more of a troll.
    >> > > > > > > > >
    >> > > > > > > > > > >
    >> > > > > > > > > > > Can't find a decent one on the web -- might have to remove it and scan
    >> > > > > > > > > > > it on the label side. It's working fine as a data drive now, but because
    >> > > > > > > > > > > it's *so* much quieter on seeks than my ancient half-height Cheetah I
    >> > > > > > > > > > > want to swap their roles in system, hence the wish for immediate spin-up.
    >> > > > > > > > > > >
    >> > > > > > > > > > > "NuTCrAcKeR" wrote:
    >> > > > > > > > > > >
    >> > > > > > > > > > > > post a link to an image ... its likely either a seagate, quantum or
    >> > > > > > > > > > > > western digital.
    >> > > > > > > > > > > >
    >> > > > > > > > > > > > - LC
    >> > > > > > > > > > > >
    >> > > > > > > > > > > > "Bruce Morgen" editor@juno.com> wrote in message news:14c5v1df6ru5mugesdhobs0d3p3hdstkvv@4ax.com...
    >> > > > > > > > > > > > > I've had no luck finding such information on this drive --
    >> > > > > > > > > > > > > I'd like to get it to spin up when power is applied rather
    >> > > > > > > > > > > > > than waiting for a SCSI Start Unit command and I'd prefer
    >> > > > > > > > > > > > > not to experiment. The mfr. of record is HP, don't know
    >> > > > > > > > > > > > > the actual company of origin but I'm pretty sure the HP
    >> > > > > > > > > > > > > part number is 232574-003. Thanks in advance for any
    >> > > > > > > > > > > > > help or hints.
    >> > > > > > > > > > > > >
    >> > > > > > > >





    .................................................. ...............
    Posted via TITANnews - Uncensored Newsgroups Access
    >>>> at http://www.TitanNews.com <<<<

    -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-


+ Reply to Thread
Page 1 of 2 1 2 LastLast