Hi

I am running mdk 9.2 with a upgraded kernel 2.4.25.
My problem is related to the USB: only one port is detected on 3.

Output of dmesg:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 07:52:37 Mar 2 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:10.0
PCI: Setting latency timer of device 00:10.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1020, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: No IRQ known for interrupt pin B of device 00:10.1.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS
settings!
PCI: No IRQ known for interrupt pin C of device 00:10.2.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS
settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Adding Swap: 506008k swap-space (priority -1)
hub.c: new USB device 00:10.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x4fc/0x3) is not claimed by any active
driver.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VS04
Type: CD-ROM ANSI SCSI revision: 02
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
usb.c: registered new driver hiddev
usb.c: registered new driver hid
usb-uhci.c: interrupt, status 3, frame# 713
input: USB HID v1.00 Mouse [04fc:0003] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver

unfortunately the phoenix bios doesn't allow me to tune the settings
(option pci=biosirq given at boot)

output of lspci:

00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP]
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0e.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
00:0e.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
00:0e.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
(rev 02)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev
06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537
[AC97 Modem] (rev 80)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4
420 Go] (rev a3)


I don't know what I can do!!

PLEASE HELP

Regards, Brice