Re: Where are my kernel modules in the source tree ? - Help

This is a discussion on Re: Where are my kernel modules in the source tree ? - Help ; On Tue, 23 Dec 2003 05:25:01 GMT, PecanEater wrote: >you just need to edit the extraversion, so it's separated. > > >PecanEater Yeah, I didn't really want to do this. I am building a kernel for another machine. To do ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: Re: Where are my kernel modules in the source tree ?

  1. Re: Where are my kernel modules in the source tree ?

    On Tue, 23 Dec 2003 05:25:01 GMT, PecanEater
    wrote:

    >you just need to edit the extraversion, so it's separated.
    >
    >
    >PecanEater


    Yeah, I didn't really want to do this.

    I am building a kernel for another machine.

    To do a modules_install, I need to become root on the compile machine.

    I did not want to do this. I built the kernel as an ordinary user.

    I really do want the modules to install to a directory of my choosing.

    Thanks anyway !



  2. bttv not loading for Hauppauge WinTV 250 PCI


    I want to convert my VHS tapes to VCD so I installed
    a Hauppauge WinTV card.

    Everything goes fine until I get to bttv.

    bttv is failing to load with a "no such device" error,
    but lsmod is finding the PCI card. I not sure want bttv
    is looking for, and I don't see anything helpful in the syslog.

    any ideas would be helpful?

    thanks.


    Mandrake 9.2

    Kernel 2.4.22-10mdk


    # modprobe i2c-core

    # modprobe i2c-algo-bit

    # modprobe videodev

    # modprobe v4l2-common

    # modprobe tuner


    # modprobe bttv card=2 radio=0
    /lib/modules/2.4.22-10mdk/kernel/drivers/media/video/bttv.o.gz:
    init_module: No such device
    Hint: insmod errors can be caused by incorrect module parameters,
    including invalid IO or IRQ parameters.
    You may find more information in syslog or the output from dmesg
    modprobe: insmod
    /lib/modules/2.4.22-10mdk/kernel/drivers/media/video/bttv.o.gz failed
    modprobe: insmod bttv failed




    # tail -3 /var/log/syslog
    Dec 30 17:23:27 wn kernel: bttv: driver version 0.7.107 loaded
    Dec 30 17:23:27 wn kernel: bttv: using 4 buffers with 2080k (8320k
    total) for capture
    Dec 30 17:23:27 wn kernel: bttv: Host bridge is Silicon Integrated
    Systems [SiS] SiS 645xx


    # lsmod | egrep 'i2c|video|v4l|tune|bttv'
    tuner 11688 0 (unused)
    v4l2-common 4032 0 (unused)
    videodev 7936 0
    i2c-algo-bit 8552 0
    i2c-core 20484 0 [msp3400 tuner i2c-algo-bit]


    # lspci -v
    00:0b.0 Multimedia video controller: Internext Compression Inc: Unknown
    device 0016 (rev 01)
    Subsystem: Hauppauge computer works Inc.: Unknown device 4009
    Flags: bus master, medium devsel, latency 32, IRQ 3
    Memory at f4000000 (32-bit, prefetchable) [size=64M]
    Capabilities: [44] Power Management version 2



    01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP
    (rev 01) (prog-if 00 [VGA])
    Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at fc000000 (32-bit, prefetchable) [size=32M]
    Memory at ef800000 (32-bit, non-prefetchable) [size=16K]
    Memory at ef000000 (32-bit, non-prefetchable) [size=8M]
    Expansion ROM at fbfe0000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
    Capabilities: [f0] AGP version 2.0


  3. Re: bttv not loading for Hauppauge WinTV 250 PCI

    On Thu, 01 Jan 2004 13:32:30 -0500, LTĀ© wrote:

    > Everything goes fine until I get to bttv.


    Try MythTV. Oh, and please don't crosspost like that! It's
    anti-social and heavily frowned upon. Learn how to behave before you
    start posting all over the place.

    Sybren
    --
    (o_ Q: God, root, what is difference?
    //\ A: God can change the byte order on the CPU, root can't.
    V_/_



+ Reply to Thread