Printable View
Hello,
[color=blue]
>From my server (Ubuntu V7.04), I handle a tape recorder via SCSI.[/color]
The commande [code]mt -f /dev/nst0 <action>[/code] works fine until I
eject the recorde.
I eject the recorder via the command [code]mt -f /dev/nst0 eject[/
code] or via the hard button.
Then, when I put an other recorder, I've this :
[code]
mt -f /dev/nst0 status
mt : no such device or address
[/code]
After a reboot, all works correctely...
Is somebody can hel me on this topic ?
Thank you.
[email]pierre.duot@gmail.com[/email] staggered into the Black Sun and said:
Please don't use BBCode on Usenet. Fixed:
[color=blue]
> Ubuntu V7.04, I handle a tape recorder via SCSI. "mt -f /dev/nst0
> <action>" works fine until I eject the [tape]. I [use] "mt -f
> /dev/nst0 eject" or the button.
>
> Then, when I put an other recorder[/color]
You mean "another tape", right? What you wrote means "another tape
drive". Ecrivez en francais si vous preferez, je peux le lire.
(desolee, slrn n'aime pas les accents.)
[color=blue]
> mt -f /dev/nst0 status
> mt : no such device or address
> After a reboot, all works correctly. [Can] somebody help me on this
> topic?[/color]
What does dmesg say about the SCSI subsystem and the tape drive? If you
really plugged another tape drive in, did you do "echo
scsi-add-single-device X Y Z W > /proc/scsi/scsi", replacing X, Y, Z,
and W with the host, bus, ID, and LUN of the new drive you plugged in?
The drive could be doing weird things when a tape's been ejected, or
possibly the st module may get rmmod'ed for some reason. Make sure st
is present in lsmod's output after you've ejected a tape. Oh well, HTH
anyway,
--
I have had to deal with kangaroos, donkeys, cows, wild pigs
and some press leaks by former Vice President Cheney.
--MegaHAL, trained on ASR
Matt G|There is no Darkness in Eternity/But only Light too dim for us to see
On 11 juin, 17:02, Dances With Crows
<danSPANceswithTRAPcr...@gmail.com> wrote:[color=blue]
> pierre.d...@gmail.com staggered into the Black Sun and said:
>
> Please don't use BBCode on Usenet. Fixed:
>[color=green]
> > Ubuntu V7.04, I handle a tape recorder via SCSI. "mt -f /dev/nst0
> > <action>" works fine until I eject the [tape]. I [use] "mt -f
> > /dev/nst0 eject" or the button.[/color]
>[color=green]
> > Then, when I put an other recorder[/color]
>
> You mean "another tape", right? What you wrote means "another tape
> drive". Ecrivez en francais si vous preferez, je peux le lire.
> (desolee, slrn n'aime pas les accents.)
>[color=green]
> > mt -f /dev/nst0 status
> > mt : no such device or address
> > After a reboot, all works correctly. [Can] somebody help me on this
> > topic?[/color]
>
> What does dmesg say about the SCSI subsystem and the tape drive? If you
> really plugged another tape drive in, did you do "echo
> scsi-add-single-device X Y Z W > /proc/scsi/scsi", replacing X, Y, Z,
> and W with the host, bus, ID, and LUN of the new drive you plugged in?
> The drive could be doing weird things when a tape's been ejected, or
> possibly the st module may get rmmod'ed for some reason. Make sure st
> is present in lsmod's output after you've ejected a tape. Oh well, HTH
> anyway,
>
> --
> I have had to deal with kangaroos, donkeys, cows, wild pigs
> and some press leaks by former Vice President Cheney.
> --MegaHAL, trained on ASR
> Matt G|There is no Darkness in Eternity/But only Light too dim for us to see[/color]
Hello,
I tried to use scsi-add-single-device 0 1 6 0 > /proc/scsi/scsi" or
remove then add but without success.
Here is what I have :
/proc/scsi/scsi after reboot
---------------------------------------
Attached devices:
Host: scsi0 Channel: 01 Id: 06 Lun: 00
Vendor: SEAGATE Model: DAT 9SP40-000 Rev: 912L
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: CD-ROM SC-148A Rev: B409
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6L080M0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6L160M0 Rev: BACE
Type: Direct-Access ANSI SCSI revision: 05
root# mt -f /dev/nst0 status
---------------------------------------
drive type = Generic SCSI-2 tape
drive status = 637534720
sense key error = 0
residue count = 0
file number = 0
block number = 0
Tape block size 512 bytes. Density code 0x26 (unknown).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN
root# mt -f /dev/nst0 eject
root# mt -f /dev/nst0 status
mt: /dev/nst0: Input/output error
------> Normal !
-----> Insert tape (the same I ejected)
root# cat /proc/scsi/scsi
-------------------------
Attached devices:
Host: scsi0 Channel: 01 Id: 06 Lun: 00
Vendor: SEAGATE Model: DAT 9SP40-000 Rev: 912L
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: CD-ROM SC-148A Rev: B409
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6L080M0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6L160M0 Rev: BACE
Type: Direct-Access ANSI SCSI revision: 05
root# mt -f /dev/nst0 status
----------------------------
mt: /dev/nst0: No such device or address
------> Here, the solution is to boot the server !!!!
My lsmod :
-----------------
....
sg 35996 0
sr_mod 17060 0
st 40092 0
sd_mod 23300 5
cdrom 37536 1 sr_mod
generic 5124 0 [permanent]
ahci 22148 0
ata_generic 9092 0
atp870u 32768 0
e1000 126528 0
ehci_hcd 34572 0
ata_piix 15620 3
libata 125848 3 ahci,ata_generic,ata_piix
uhci_hcd 25488 0
usbcore 134408 3 ehci_hcd,uhci_hcd
scsi_mod 142220 6 sg,sr_mod,st,sd_mod,atp870u,libata
thermal 14856 0
....
Thank you for your help