Nvidia sata 2.4 - Hardware

This is a discussion on Nvidia sata 2.4 - Hardware ; Dear all, we have a a computer Tyan K8SE . with 4 cpus and 4G RAM, and SATA disk. The kernel is 2.4.32 . sometimes (about once a month) the computer stops responding with following message: ata1: command 0x35 timeout, ...

+ Reply to Thread
Results 1 to 6 of 6

Thread: Nvidia sata 2.4

  1. Nvidia sata 2.4


    Dear all,

    we have a a computer Tyan K8SE .
    with 4 cpus and 4G RAM, and SATA disk.
    The kernel is 2.4.32 .
    sometimes (about once a month) the computer stops responding with
    following message:

    ata1: command 0x35 timeout, stat 0xd0 host_stat 0x21
    ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
    ata1: status=0xd0 { Busy }
    SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 8000002
    Current sd08:03: sense key Aborted Command
    Additional sense indicates Scsi parity error
    I/O error: dev 08:03, sector 5367736
    ATA: abnormal status 0xD0 on port 0x1447
    ATA: abnormal status 0xD0 on port 0x1447
    ATA: abnormal status 0xD0 on port 0x1447

    The driver of sata is sata_nv (Nvidia).
    We assume that hardware is ok (we have another 10 computers with same
    config and same issue).

    I need to reproduce and fix this bug.

    Here - http://readlist.com/lists/vger.kerne...30/154602.html
    we had seen similar discussion, but they talk about 2.6 kernel, and the
    patches which solved their problem are already applied on our machine.

    I am ready to add to kernel any debug messages to get more info of this
    problem. I would appreciate any help very much.

    Thanks!
    Vitaly

    This is a dmesg output:
    -----------------------
    CPU: After generic, caps: 178bfbff e3d3fbff 00000000 00000000
    CPU: Common caps: 178bfbff e3d3fbff 00000000 00000000
    CPU1: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02
    Booting processor 2/2 eip 3000
    Initializing CPU#2
    masked ExtINT on CPU#2
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Calibrating delay loop... 4358.14 BogoMIPS
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU: After generic, caps: 178bfbff e3d3fbff 00000000 00000000
    CPU: Common caps: 178bfbff e3d3fbff 00000000 00000000
    CPU2: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02
    Booting processor 3/3 eip 3000
    Initializing CPU#3
    masked ExtINT on CPU#3
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Calibrating delay loop... 4341.76 BogoMIPS
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU: After generic, caps: 178bfbff e3d3fbff 00000000 00000000
    CPU: Common caps: 178bfbff e3d3fbff 00000000 00000000
    CPU3: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02
    Total of 4 processors activated (17465.34 BogoMIPS).
    ENABLING IO-APIC IRQs
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23,
    5-0, 5-1,
    5-2, 5-3, 6-0, 6-1, 6-2, 6-3 not connected.
    ...TIMER: vector=0x31 pin1=0 pin2=-1
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ...... CPU clock speed is 2209.1584 MHz.
    ...... host bus clock speed is 200.1780 MHz.
    cpu: 0, clocks: 401780, slice: 80356
    CPU0
    cpu: 3, clocks: 401780, slice: 80356
    cpu: 1, clocks: 401780, slice: 80356
    cpu: 2, clocks: 401780, slice: 80356
    CPU1
    CPU2
    CPU3
    checking TSC synchronization across CPUs: passed.
    migration_task 0 on cpu=0
    migration_task 1 on cpu=1
    migration_task 2 on cpu=2
    migration_task 3 on cpu=3
    ACPI: Subsystem revision 20040326
    PCI: PCI BIOS revision 2.10 entry at 0xfd741, last bus=26
    PCI: Using configuration type 1
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: System [ACPI] (supports S0 S1 S4 S5)
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    Transparent bridge - PCI device 10de:005c (nVidia Corporation)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
    ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
    ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
    ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
    ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Root Bridge [PCI2] (00:18)
    PCI: Probing PCI hardware (bus 18)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
    PCI: Probing PCI hardware
    ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 23
    00:00:01[A] -> 4-23 -> IRQ 23 level high
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
    00:00:02[A] -> 4-22 -> IRQ 22 level high
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
    00:00:02[B] -> 4-21 -> IRQ 21 level high
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
    00:00:0a[A] -> 4-20 -> IRQ 20 level high
    ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23
    ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22
    ACPI: PCI Interrupt Link [LPID] enabled at IRQ 21
    ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
    ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 23
    ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19
    00:01:06[A] -> 4-19 -> IRQ 19 level high
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 18
    00:01:04[A] -> 4-18 -> IRQ 18 level high
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 17
    00:01:04[B] -> 4-17 -> IRQ 17 level high
    ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 16
    00:01:04[D] -> 4-16 -> IRQ 16 level high
    00:19:02[A] -> 5-2 -> IRQ 26 level low
    00:19:02[B] -> 5-3 -> IRQ 27 level low
    00:19:02[C] -> 5-0 -> IRQ 24 level low
    00:19:02[D] -> 5-1 -> IRQ 25 level low
    00:1a:03[A] -> 6-2 -> IRQ 30 level low
    00:1a:03[B] -> 6-3 -> IRQ 31 level low
    00:1a:03[C] -> 6-0 -> IRQ 28 level low
    00:1a:03[D] -> 6-1 -> IRQ 29 level low
    number of MP IRQ sources: 16.
    number of IO-APIC #4 registers: 24.
    number of IO-APIC #5 registers: 4.
    number of IO-APIC #6 registers: 4.
    testing the IO APIC.......................

    IO APIC #4......
    ..... register #00: 04000000
    ........ : physical APIC id: 04
    ........ : Delivery Type: 0
    ........ : LTS : 0
    ..... register #01: 00170011
    ........ : max redirection entries: 0017
    ........ : PRQ implemented: 0
    ........ : IO APIC version: 0011
    ..... register #02: 04000000
    ........ : arbitration: 04
    ..... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 00F 0F 0 0 0 0 0 1 1 31
    01 00F 0F 0 0 0 0 0 1 1 39
    02 00F 0F 0 0 0 0 0 1 1 41
    03 00F 0F 0 0 0 0 0 1 1 49
    04 00F 0F 0 0 0 0 0 1 1 51
    05 00F 0F 0 0 0 0 0 1 1 59
    06 00F 0F 0 0 0 0 0 1 1 61
    07 00F 0F 1 0 0 0 0 1 1 69
    08 00F 0F 0 0 0 0 0 1 1 71
    09 00F 0F 0 1 0 1 0 1 1 79
    0a 00F 0F 0 0 0 0 0 1 1 81
    0b 00F 0F 0 0 0 0 0 1 1 89
    0c 00F 0F 0 0 0 0 0 1 1 91
    0d 00F 0F 0 0 0 0 0 1 1 99
    0e 00F 0F 0 0 0 0 0 1 1 A1
    0f 00F 0F 0 0 0 0 0 1 1 A9
    10 00F 0F 1 1 0 0 0 1 1 E9
    11 00F 0F 1 1 0 0 0 1 1 E1
    12 00F 0F 1 1 0 0 0 1 1 D9
    13 00F 0F 1 1 0 0 0 1 1 D1
    14 00F 0F 1 1 0 0 0 1 1 C9
    15 00F 0F 1 1 0 0 0 1 1 C1
    16 00F 0F 1 1 0 0 0 1 1 B9
    17 00F 0F 1 1 0 0 0 1 1 B1

    IO APIC #5......
    ..... register #00: 05000000
    ........ : physical APIC id: 05
    ........ : Delivery Type: 0
    ........ : LTS : 0
    ..... register #01: 00030011
    ........ : max redirection entries: 0003
    An unexpected IO-APIC was found. If this kernel release is less than
    three months old please report this to linux-smp@vger.kernel.org
    ........ : PRQ implemented: 0
    ........ : IO APIC version: 0011
    ..... register #02: 00000000
    ........ : arbitration: 00
    ..... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 00F 0F 1 1 0 1 0 1 1 42
    01 00F 0F 1 1 0 1 0 1 1 4A
    02 00F 0F 1 1 0 1 0 1 1 32
    03 00F 0F 1 1 0 1 0 1 1 3A

    IO APIC #6......
    ..... register #00: 06000000
    ........ : physical APIC id: 06
    ........ : Delivery Type: 0
    ........ : LTS : 0
    ..... register #01: 00030011
    ........ : max redirection entries: 0003
    An unexpected IO-APIC was found. If this kernel release is less than
    three months old please report this to linux-smp@vger.kernel.org
    ........ : PRQ implemented: 0
    ........ : IO APIC version: 0011
    ..... register #02: 00000000
    ........ : arbitration: 00
    ..... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 00F 0F 1 1 0 1 0 1 1 62
    01 00F 0F 1 1 0 1 0 1 1 6A
    02 00F 0F 1 1 0 1 0 1 1 52
    03 00F 0F 1 1 0 1 0 1 1 5A
    IRQ to pin mappings:
    IRQ0 -> 0:0
    IRQ1 -> 0:1
    IRQ2 -> 0:2
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    IRQ16 -> 0:16
    IRQ17 -> 0:17
    IRQ18 -> 0:18
    IRQ19 -> 0:19
    IRQ20 -> 0:20
    IRQ21 -> 0:21
    IRQ22 -> 0:22
    IRQ23 -> 0:23
    IRQ24 -> 1:0
    IRQ25 -> 1:1
    IRQ26 -> 1:2
    IRQ27 -> 1:3
    IRQ28 -> 2:0
    IRQ29 -> 2:1
    IRQ30 -> 2:2
    IRQ31 -> 2:3
    ..................................... done.
    :
    PCI: Using ACPI for IRQ routing
    PCI: Cannot allocate resource region 4 of device 00:01.1
    PCI: Cannot allocate resource region 5 of device 00:01.1
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    apm: BIOS not found.
    Starting kswapd
    allocated 32 pages and 32 bhs reserved for the highmem bounces
    VFS: Disk quotas vdquot_6.5.1
    Journalled Block Device driver loaded
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    udf: registering filesystem
    ACPI: Power Button (FF) [PWRF]
    Detected PS/2 Mouse Port.
    pty: 256 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
    SERIAL_PCI IS
    APNP enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    [f7fcc000] /dev/epoll: driver installed.
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    loop: loaded (max 8 devices)
    Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 8962M
    agpgart: no supported devices found.
    [drm] Initialized tdfx 1.0.0 20010216 on minor 0
    [drm] Initialized r128 2.2.0 20010917 on minor 1
    [drm] Initialized radeon 1.7.0 20020828 on minor 2
    [drm:drm_init] *ERROR* Cannot initialize the agpgart module.
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    keyboard: Timeout - AT keyboard not present?(ed)
    keyboard: Timeout - AT keyboard not present?(f4)
    SCSI subsystem driver Revision: 1.00
    libata version 1.20 loaded.
    PCI(00:07.0): version 0.8
    PCI: Setting latency timer of device 00:07.0 to 64
    PCI: Setting latency timer of device 00:08.0 to 64
    ata1: SATA max UDMA/133 cmd 0x1440 ctl 0x1436 bmdma 0x1410 irq 20
    ata2: SATA max UDMA/133 cmd 0x1438 ctl 0x1432 bmdma 0x1418 irq 20
    ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4063 85:7469 86:3d41 87:4063
    88:407f
    ata1: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48
    ata1: dev 0 configured for UDMA/133
    ata2: no device found (phy stat 00000000)
    ata3: SATA max UDMA/133 cmd 0x1458 ctl 0x144E bmdma 0x1420 irq 23
    ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x144A bmdma 0x1428 irq 23
    ata3: no device found (phy stat 00000000)
    ata4: no device found (phy stat 00000000)
    scsi0 : sata_nv
    scsi1 : sata_nv
    scsi2 : sata_nv
    scsi3 : sata_nv
    Vendor: ATA Model: WDC WD2500YS-01S Rev: 20.0
    Type: Direct-Access ANSI SCSI revision: 05
    Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
    Partition check:
    sda: sda1 sda2 sda3
    Linux Kernel Card Services 3.1.22
    options: [pci] [cardbus] [pm]
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    PCI: Setting latency timer of device 00:02.1 to 64
    ehci_hcd 00:02.1: PCI device 10de:005b (nVidia Corporation)
    ehci_hcd 00:02.1: irq 21, pci mem f880e000
    usb.c: new USB bus registered, assigned bus number 1
    ehci_hcd 00:02.1: BIOS handoff failed (160, 1010001)
    PCI: cache line size of 64 is not supported by device 00:02.1
    ehci_hcd 00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    hub.c: USB hub found
    hub.c: 10 ports detected
    PCI: Setting latency timer of device 00:02.0 to 64
    host/usb-ohci.c: USB OHCI at membase 0xf8810000, IRQ 22
    host/usb-ohci.c: usb-00:02.0, PCI device 10de:005a (nVidia Corporation)
    usb.c: new USB bus registered, assigned bus number 2
    hub.c: USB hub found
    hub.c: 10 ports detected
    usb.c: registered new driver usblcd
    usblcd.c: USBLCD Driver Version 1.03 (C) Adams IT Services
    http://www.usblcd.de
    usblcd.c: USBLCD support registered.
    usb.c: registered new driver serial
    usbserial.c: USB Serial Driver core v1.4
    usbserial.c: USB Serial support registered for FTDI SIO
    usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
    usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
    usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
    usbserial.c: USB Serial support registered for Home-Electronics TIRA-1
    IR Transc
    eiver
    ftdi_sio.c: v1.3.5:USB FTDI Serial Converters Driver
    IPv6 v0.8 for NET4.0
    IPv6 over IPv4 tunneling driver
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 131072 buckets, 1024Kbytes
    TCP: Hash tables configured (established 262144 bind 65536)
    IPv4 over IPv4 tunneling driver
    GRE over IPv4 tunneling driver
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    ds: no socket drivers loaded!
    RAMDISK: Compressed image found at block 0
    Freeing initrd memory: 62k freed
    VFS: Mounted root (ext2 filesystem).
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Freeing unused kernel memory: 144k freed
    EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
    Swap area shorter than signature indicates
    kjournald starting. Commit interval 5 seconds
    EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Swap area shorter than signature indicates
    keyboard: Timeout - AT keyboard not present?(f4)
    Cavium Driver --- 0.99-k
    N1 Device found at Bus 25 Slot 3
    bar 0: 3400
    bar 2: 3000
    Local Mem size 8000000
    Number of banks 1
    DDR size : 0x08000000
    mem base: 4194304 max 130023424
    Finished Initializing this device
    MAX 1 N1 Devices supported
    Ignoring other N1 devices
    Total Number of N1/N1-Lite Devices: 1
    Completion Addr c7d50000
    Completion Bus Addr 7d50000
    Starting poll_thread
    device count = 1
    Registeration is a success The major device number is 125
    if you want to talk to the device driver,
    I suggest you use:
    mknod pkp_drv c 125 0


  2. Re: Nvidia sata 2.4

    vitaly wrote:
    >
    > Dear all,
    >
    > we have a a computer Tyan K8SE .
    > with 4 cpus and 4G RAM, and SATA disk.
    > The kernel is 2.4.32 .
    > sometimes (about once a month) the computer stops responding with
    > following message:


    I have a similar config... different mb... but also using
    the Nvidia Pro 2200 chipset... can you do an lspci and see if
    your SATA info matches mine?

    00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
    00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
    00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)

    My machine is dual 275's with 4G.... very similar to your config.

    But I have never seen that message (but willing to say my machine
    isn't on 24x7).

  3. Re: Nvidia sata 2.4

    Hi,
    Thanks for response !
    This my lspci output:

    00:00.0 Memory controller: nVidia Corporation: Unknown device 005e (rev a3)
    00:01.0 ISA bridge: nVidia Corporation: Unknown device 0051 (rev a3)
    00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
    00:02.0 USB Controller: nVidia Corporation: Unknown device 005a (rev a2)
    00:02.1 USB Controller: nVidia Corporation: Unknown device 005b (rev a3)
    00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
    00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
    00:08.0 IDE interface: nVidia Corporation: Unknown device 0055 (rev f3)
    00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
    00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
    00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)

    I think it is same as your's.
    What kernel you use? How much RAM?

    Thanks,
    Vitaly


    Chris Cox wrote:
    > vitaly wrote:
    >>
    >> Dear all,
    >>
    >> we have a a computer Tyan K8SE .
    >> with 4 cpus and 4G RAM, and SATA disk.
    >> The kernel is 2.4.32 .
    >> sometimes (about once a month) the computer stops responding with
    >> following message:

    >
    > I have a similar config... different mb... but also using
    > the Nvidia Pro 2200 chipset... can you do an lspci and see if
    > your SATA info matches mine?
    >
    > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
    > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    > (rev a3)
    > 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    > (rev a3)
    >
    > My machine is dual 275's with 4G.... very similar to your config.
    >
    > But I have never seen that message (but willing to say my machine
    > isn't on 24x7).


  4. Re: Nvidia sata 2.4

    vitaly wrote:
    > Hi,
    > Thanks for response !
    > This my lspci output:
    >
    > 00:00.0 Memory controller: nVidia Corporation: Unknown device 005e (rev a3)
    > 00:01.0 ISA bridge: nVidia Corporation: Unknown device 0051 (rev a3)
    > 00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
    > 00:02.0 USB Controller: nVidia Corporation: Unknown device 005a (rev a2)
    > 00:02.1 USB Controller: nVidia Corporation: Unknown device 005b (rev a3)
    > 00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
    > 00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
    > 00:08.0 IDE interface: nVidia Corporation: Unknown device 0055 (rev f3)
    > 00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
    > 00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
    > 00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
    >
    > I think it is same as your's.
    > What kernel you use? How much RAM?


    I'm running openSUSE 10.3 and I have 4G.

    ccox@leviathan:~> uname -a
    Linux leviathan 2.6.22.17-0.1-default #1 SMP 2008/02/10 20:01:04 UTC x86_64 x86_64 x86_64 GNU/Linux
    ccox@leviathan:~> free
    total used free shared buffers cached
    Mem: 4051076 2501168 1549908 0 67504 918480
    -/+ buffers/cache: 1515184 2535892
    Swap: 4200988 0 4200988

    My motherboard is closest to being a Iwill DK8ES, it's actually a
    fairly rare variant in a SFF design known as the ZmaxD2. About
    the only thing strangely different is only one process accesses
    memory, but they added an extra hypertransport to increase
    the throughput.

    Not why your nVidia devices are showing up as Unknown device. Mine
    are known.... and just reading the specs on the Tyan K8SE, it
    seems to have the CK804 controller like mine...

    # lspci | grep nVidia
    00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
    00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
    00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
    00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
    00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
    00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
    00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
    00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
    00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
    00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
    00:0a.0 Ethernet controller: nVidia Corporation CK804 Ethernet Controller (rev a3)
    00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GS] (rev a1)


    >
    > Thanks,
    > Vitaly
    >
    >
    > Chris Cox wrote:
    >> vitaly wrote:
    >>>
    >>> Dear all,
    >>>
    >>> we have a a computer Tyan K8SE .
    >>> with 4 cpus and 4G RAM, and SATA disk.
    >>> The kernel is 2.4.32 .
    >>> sometimes (about once a month) the computer stops responding with
    >>> following message:

    >>
    >> I have a similar config... different mb... but also using
    >> the Nvidia Pro 2200 chipset... can you do an lspci and see if
    >> your SATA info matches mine?
    >>
    >> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
    >> 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    >> (rev a3)
    >> 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    >> (rev a3)
    >>
    >> My machine is dual 275's with 4G.... very similar to your config.
    >>
    >> But I have never seen that message (but willing to say my machine
    >> isn't on 24x7).


  5. Re: Nvidia sata 2.4

    Thanks!
    Probably the problem is our kernel - it is 2.4 .
    Unfortunately we can not upgrade.
    But it is nice to know that in 2.6 the problem does not exist.

    Best Regards,
    Vitaly

    Chris Cox wrote:
    > vitaly wrote:
    >> Hi,
    >> Thanks for response !
    >> This my lspci output:
    >>
    >> 00:00.0 Memory controller: nVidia Corporation: Unknown device 005e
    >> (rev a3)
    >> 00:01.0 ISA bridge: nVidia Corporation: Unknown device 0051 (rev a3)
    >> 00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
    >> 00:02.0 USB Controller: nVidia Corporation: Unknown device 005a (rev a2)
    >> 00:02.1 USB Controller: nVidia Corporation: Unknown device 005b (rev a3)
    >> 00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
    >> 00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
    >> 00:08.0 IDE interface: nVidia Corporation: Unknown device 0055 (rev f3)
    >> 00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
    >> 00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
    >> 00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
    >>
    >> I think it is same as your's.
    >> What kernel you use? How much RAM?

    >
    > I'm running openSUSE 10.3 and I have 4G.
    >
    > ccox@leviathan:~> uname -a
    > Linux leviathan 2.6.22.17-0.1-default #1 SMP 2008/02/10 20:01:04 UTC
    > x86_64 x86_64 x86_64 GNU/Linux
    > ccox@leviathan:~> free
    > total used free shared buffers cached
    > Mem: 4051076 2501168 1549908 0 67504 918480
    > -/+ buffers/cache: 1515184 2535892
    > Swap: 4200988 0 4200988
    >
    > My motherboard is closest to being a Iwill DK8ES, it's actually a
    > fairly rare variant in a SFF design known as the ZmaxD2. About
    > the only thing strangely different is only one process accesses
    > memory, but they added an extra hypertransport to increase
    > the throughput.
    >
    > Not why your nVidia devices are showing up as Unknown device. Mine
    > are known.... and just reading the specs on the Tyan K8SE, it
    > seems to have the CK804 controller like mine...
    >
    > # lspci | grep nVidia
    > 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller
    > (rev a3)
    > 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
    > 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
    > 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
    > 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
    > 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97
    > Audio Controller (rev a2)
    > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
    > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    > (rev a3)
    > 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    > (rev a3)
    > 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
    > 00:0a.0 Ethernet controller: nVidia Corporation CK804 Ethernet
    > Controller (rev a3)
    > 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    > 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    > 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    > 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    > 01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600
    > GS] (rev a1)
    >
    >
    >>
    >> Thanks,
    >> Vitaly
    >>
    >>
    >> Chris Cox wrote:
    >>> vitaly wrote:
    >>>>
    >>>> Dear all,
    >>>>
    >>>> we have a a computer Tyan K8SE .
    >>>> with 4 cpus and 4G RAM, and SATA disk.
    >>>> The kernel is 2.4.32 .
    >>>> sometimes (about once a month) the computer stops responding with
    >>>> following message:
    >>>
    >>> I have a similar config... different mb... but also using
    >>> the Nvidia Pro 2200 chipset... can you do an lspci and see if
    >>> your SATA info matches mine?
    >>>
    >>> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
    >>> 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    >>> (rev a3)
    >>> 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    >>> (rev a3)
    >>>
    >>> My machine is dual 275's with 4G.... very similar to your config.
    >>>
    >>> But I have never seen that message (but willing to say my machine
    >>> isn't on 24x7).


  6. Re: Nvidia sata 2.4

    On Mon, 2008-02-25 at 22:46 +0200, vitaly wrote:
    > Thanks!
    > Probably the problem is our kernel - it is 2.4 .
    > Unfortunately we can not upgrade.
    > But it is nice to know that in 2.6 the problem does not exist.


    Yes.. in 2.6, libata is king... not so in 2.4. A lot
    of things change in 2.6. Are you running the latest 2.4?
    Just curious if that would handle things albeit the old way.

    Regardless... the lack of device recognition if the foremost
    issue. Try the latest 2.4 and see if that helps.

    >
    > Best Regards,
    > Vitaly
    >
    > Chris Cox wrote:
    > > vitaly wrote:
    > >> Hi,
    > >> Thanks for response !
    > >> This my lspci output:
    > >>
    > >> 00:00.0 Memory controller: nVidia Corporation: Unknown device 005e
    > >> (rev a3)
    > >> 00:01.0 ISA bridge: nVidia Corporation: Unknown device 0051 (rev a3)
    > >> 00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
    > >> 00:02.0 USB Controller: nVidia Corporation: Unknown device 005a (rev a2)
    > >> 00:02.1 USB Controller: nVidia Corporation: Unknown device 005b (rev a3)
    > >> 00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
    > >> 00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
    > >> 00:08.0 IDE interface: nVidia Corporation: Unknown device 0055 (rev f3)
    > >> 00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
    > >> 00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
    > >> 00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
    > >>
    > >> I think it is same as your's.
    > >> What kernel you use? How much RAM?

    > >
    > > I'm running openSUSE 10.3 and I have 4G.
    > >
    > > ccox@leviathan:~> uname -a
    > > Linux leviathan 2.6.22.17-0.1-default #1 SMP 2008/02/10 20:01:04 UTC
    > > x86_64 x86_64 x86_64 GNU/Linux
    > > ccox@leviathan:~> free
    > > total used free shared buffers cached
    > > Mem: 4051076 2501168 1549908 0 67504 918480
    > > -/+ buffers/cache: 1515184 2535892
    > > Swap: 4200988 0 4200988
    > >
    > > My motherboard is closest to being a Iwill DK8ES, it's actually a
    > > fairly rare variant in a SFF design known as the ZmaxD2. About
    > > the only thing strangely different is only one process accesses
    > > memory, but they added an extra hypertransport to increase
    > > the throughput.
    > >
    > > Not why your nVidia devices are showing up as Unknown device. Mine
    > > are known.... and just reading the specs on the Tyan K8SE, it
    > > seems to have the CK804 controller like mine...
    > >
    > > # lspci | grep nVidia
    > > 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller
    > > (rev a3)
    > > 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
    > > 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
    > > 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
    > > 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
    > > 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97
    > > Audio Controller (rev a2)
    > > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
    > > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    > > (rev a3)
    > > 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    > > (rev a3)
    > > 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
    > > 00:0a.0 Ethernet controller: nVidia Corporation CK804 Ethernet
    > > Controller (rev a3)
    > > 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    > > 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    > > 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    > > 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
    > > 01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600
    > > GS] (rev a1)
    > >
    > >
    > >>
    > >> Thanks,
    > >> Vitaly
    > >>
    > >>
    > >> Chris Cox wrote:
    > >>> vitaly wrote:
    > >>>>
    > >>>> Dear all,
    > >>>>
    > >>>> we have a a computer Tyan K8SE .
    > >>>> with 4 cpus and 4G RAM, and SATA disk.
    > >>>> The kernel is 2.4.32 .
    > >>>> sometimes (about once a month) the computer stops responding with
    > >>>> following message:
    > >>>
    > >>> I have a similar config... different mb... but also using
    > >>> the Nvidia Pro 2200 chipset... can you do an lspci and see if
    > >>> your SATA info matches mine?
    > >>>
    > >>> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
    > >>> 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    > >>> (rev a3)
    > >>> 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
    > >>> (rev a3)
    > >>>
    > >>> My machine is dual 275's with 4G.... very similar to your config.
    > >>>
    > >>> But I have never seen that message (but willing to say my machine
    > >>> isn't on 24x7).



+ Reply to Thread