GP2X 3.0 Op System
Linux trash ....
I will flash my GP2X 3.0
back to the old Linux , which
was not as crippled .
I can see what i have
on my older GP2X , it has all
the same JPG and MP-3 and
it shows NAND flash and the
systems settings are avail .
But not 3.0 !! NAND is greyed out
and ADVANCED is greyed out ...
So i go to INFO , and all i get
is a GPH advert !
The EXT connector is microscopic ,
and is far too close spaced for high
speed signals .
I have 10 Nintendo DS Lites , im hacking .
They have 802.11b WIFI and the
BIOS is easy ! Moonshell OpSystem is
crash every other keystroke .
attach a KeyBoard
to GBA port , plus a 100 GB HDD , and
start hacking ! But you'll need to get your
nieghbor to FlashMe2 the EEPRM ,
to "unlock" the protection ...
I bought a "M3-Simply " , but it tunnels
dynamically . I'll tunnel by permanantly
flashing the EEPROM , so i wont need
to use M3-Simply any more .
BTW I have a 49G+ .
Its worthless . Everything i type ,
in is wrong , because of the bad
formware keyboard routines .
You repeatedly MUL a constant
and it does it correct , but repeat
and take your eyes off the LCD ,
and it deletes a number , and MUL
the wrong number .
Hewlett Packard is garbage ..