nokia 9110 crash - GEOS

This is a discussion on nokia 9110 crash - GEOS ; nokia 9110 crash : my 9110 PDA screen is utterly blank 1s just after the boot, the PC software is connected and working but the usual reboot procedure (shift+tab+f when inserting the battery) ask for a reformating (on the PDA ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: nokia 9110 crash

  1. nokia 9110 crash

    nokia 9110 crash : my 9110 PDA screen is utterly blank 1s just after
    the boot, the PC software is connected and working but the usual
    reboot procedure (shift+tab+f when inserting the battery) ask for a
    reformating (on the PDA screen, which is correct) but doesn't work
    afterwards (the 9110 crash again while restarting).

    anybody has any information about how to correctly reboot that old
    GEOS piece of software ?

    gilles

  2. Re: nokia 9110 crash

    Your main processor seems to be broken. I was a service specialist for Nokia
    Communicators series for several years and my oppinion is the following:
    some of the soldering balls between processor (AMD 486/33) and PDA PCB are
    broken. This could be a total damage of this board...! Normally no
    service-center is able to rework the SPOCK (=9110) PCB. In the case of a
    (more simple) drop out error of Flash RAM you should give it to a service
    center for reflashing GEOS Firmware. Good luck.


    greetings from germany

    "depardieu" schrieb im Newsbeitrag
    news:e633a30c.0310010305.5ffae571@posting.google.c om...
    > nokia 9110 crash : my 9110 PDA screen is utterly blank 1s just after
    > the boot, the PC software is connected and working but the usual
    > reboot procedure (shift+tab+f when inserting the battery) ask for a
    > reformating (on the PDA screen, which is correct) but doesn't work
    > afterwards (the 9110 crash again while restarting).
    >
    > anybody has any information about how to correctly reboot that old
    > GEOS piece of software ?
    >
    > gilles




  3. Re: nokia 9110 crash

    On 1 Oct 2003 04:05:23 -0700, depardieu@ifrance.com (depardieu) wrote:

    >nokia 9110 crash : my 9110 PDA screen is utterly blank 1s just after
    >the boot, the PC software is connected and working but the usual
    >reboot procedure (shift+tab+f when inserting the battery) ask for a
    >reformating (on the PDA screen, which is correct) but doesn't work
    >afterwards (the 9110 crash again while restarting).
    >
    >anybody has any information about how to correctly reboot that old
    >GEOS piece of software ?


    The answer from the other poster ("processor broken") ssems to be a
    bit drastic.

    It may be a silly question, but did you remove the MMC memory card? It
    may have a corrupt file structure.

    Another common reason for a crash is that the GEOS.INI is broken. Try
    to put a backup copy into the NOKIA folder of the MMC card using a pc
    card reader.

    HTH,


    Holger

+ Reply to Thread