This is a discussion on boot0: Unable to boot DOS slices/partitions - FreeBSD ; I've been working for the past 2-3 days on a Wiki entry describing how to get two versions or architecture types of FreeBSD, and MS-DOS, all on a USB stick. The intended goal is to allow an administrator to install ...
I've been working for the past 2-3 days on a Wiki entry describing how
to get two versions or architecture types of FreeBSD, and MS-DOS, all on
a USB stick. The intended goal is to allow an administrator to install
FreeBSD i386 or FreeBSD amd64 from a USB stick, while also providing the
ability to boot DOS for BIOS upgrades and so forth.
Please note the below is a complete mess, due to the fact that I have
spent the past 9 hours editing things off and on.
So far, I've had great success with the FreeBSD part of it -- no issues
or oddities. The problem I'm running into is the DOS part.
I've been completely unable to get boot0 to boot MS-DOS 6.22 (on a FAT16
slice), MS-DOS 7.10 (on a FAT16 or FAT32 slice), or FreeDOS 1.0 (on a
FAT16 or FAT32 slice). With MS-DOS, COMMAND.COM, IO.SYS, and MSDOS.SYS
are all copied on to the slice. With FreeDOS, COMMAND.COM and
KERNEL.SYS are all copied on to the slice.
boot0 shows "F1 DOS" as a choice, but depending upon where I formatted
the slice (on Windows XP or via newfs_msdos), I get one of the following
two error messages from the bootstraps installed on /dev/da0s1:
I've even gone so far to try using FAT32LBA.BIN from the FreeDOS
project as the bootstrap, e.g. newfs_msdos -B FAT32LBA.BIN /dev/da0s1
which just causes a hard-lock.
Enabling packet mode in boot0cfg makes no difference.
What *does* work, however, is using FAT32LBA.BIN and SYSLINUX together
as the actual boot loader itself (e.g. at sector 0). I can successfully
boot FreeDOS using this method.
I'd advocate using SYSLINUX entirely, but it doesn't appear possible to
get SYSLINUX to boot a slice/partition, only refer to actual files on
the FAT16/FAT32 partition.
I'd try GRUB, except that all of my BSD boxes at home are amd64 (sans
the one I'm trying to boot the USB stick on, but that doesn't have
FreeBSD installed on it), and sysutils/grub only builds on i386.
DISK Geometry: 977 cyls/255 heads/63 sectors = 15695505 sectors (7663MB)
Offset Size(KB) End Name PType Desc Subtype Flags
0 31 62 - 12 unused 0
63 5759271 11518604 da0s1 4 fat (32-bit,LBA) 12 A
11518605 1044225 13607054 da0s2 8 freebsd 165
13607055 1044225 15695504 da0s3 8 freebsd 165
15695505 183 15695870 - 12 unused 0
I don't have boot0cfg output immediately on hand, but can get it if need
| Jeremy Chadwick jdc at parodius.com |
| Parodius Networking http://www.parodius.com/ |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "email@example.com"