In message: <49131109.2020601@FreeBSD.org>
Alexander Motin writes:
: Lars Engels wrote:
: > 1. How can I tune the PCI configuration? With pciconf -w or so?
:
: Yes. `pciconf -r -b device addr` to read and `pciconf -w -b device addr
: value` to write.

I have changes that almost make my TI card do it.

: > 2. Unfortunately the sysctl did not change a thing with regard to the
: > Card reader.
:
: Have you added it to the loader.conf and rebooted?
:
: > 3. I added the chip ID and the second device is now recognized as a
: > sdhci device but still does not see any card inserted:
: >
: > Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't specify base
: > clock frequency.
: > Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't specify
: > timeout clock frequency.
: > Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't report any
: > support voltages.
:
: Looks like it is not enough compatible, or even not compatible.

Chances are good that you need to the workaround to turn on these
things.

Warner
_______________________________________________
freebsd-mobile@freebsd.org mailing list
http://lists.freebsd.org/mailman/lis...freebsd-mobile
To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org"