This is a discussion on Re: ICH7M limited to SATA-150? - FreeBSD ; On Thu, Oct 30, 2008 at 01:47:48PM -0700, Xin LI wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi, > > Michael Butler wrote: > > Recently, I upgraded the disk in my Toshiba A105 with a ...
On Thu, Oct 30, 2008 at 01:47:48PM -0700, Xin LI wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> Michael Butler wrote:
> > Recently, I upgraded the disk in my Toshiba A105 with a 7200rpm SATA-II
> > device but it seems to still talking at SATA-I speed :-(
> > atapci0:
> > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
> > [ .. snip .. ]
> > ad0: 305245MB
at ata0-master SATA150
> > acd0: DVDR
at ata1-master UDMA33
> > There don't appear to be any obvious 'compatibility jumpers' on the
> > drive, so I'm wondering what gives?
> > Is it possible this is hard-coded into the BIOS?
> Personally I don't really think ICH7M is capable to do SATA-300. Intel
> datasheet 307013, page 191 says:
> Supported Supported
> 3 Gb/s Transfer Rate
> (Desktop Only) (Desktop Only)
> My understanding is that ICH7- *M* does not support SATA-300 at all.
Xin Li is correct -- the mobile version doesn't do SATA300.
| Jeremy Chadwick jdc at parodius.com |
| Parodius Networking http://www.parodius.com/ |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "email@example.com"