Re: if_re is broken on RELENG_7 ? - FreeBSD

This is a discussion on Re: if_re is broken on RELENG_7 ? - FreeBSD ; On Thu, Oct 02, 2008 at 10:26:00AM +0300, Sergey V. Dyatko wrote: > Hi list, > I have ASUS a6m laptop with integrated RTL8168/8111 PCI-E Gigabit > Ethernet NIC, long time ago (7.0-CURRENT - 7.0-prerelease) I used it. > Than ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Re: if_re is broken on RELENG_7 ?

  1. Re: if_re is broken on RELENG_7 ?

    On Thu, Oct 02, 2008 at 10:26:00AM +0300, Sergey V. Dyatko wrote:
    > Hi list,
    > I have ASUS a6m laptop with integrated RTL8168/8111 PCI-E Gigabit
    > Ethernet NIC, long time ago (7.0-CURRENT - 7.0-prerelease) I used it.
    > Than I started to enjoy BCM43XX wi-fi adapter and now I recently
    > decided to revert to the use of realtek adapter. But it doesn't work.
    > I'm just not running a network card or at all does not work?
    >
    > some additional information:
    > ifconfig shows such information, regardless of whether the cable is
    > connected:
    >
    > %ifconfig re0
    > re0: flags=8802 metric 0 mtu 1500
    > options=389b
    > ether 00:1a:92:ca:b3:bc
    > media: Ethernet autoselect (10baseT/UTP )
    > status: no carrier
    >
    > [tiger@notebook]~%pciconf -lv | grep re0 -A 4
    > re0@pci0:2:0:0: class=0x020000 card=0x11f51043 chip=0x816810ec rev=0x01
    > hdr=0x00 vendor = 'Realtek Semiconductor'
    > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    > class = network
    > subclass = ethernet
    > dmesg output: http://tiger.byfly.by/files/dmesg.boot
    > kernel config: http://tiger.byfly.by/files/tiger-asus-a6m
    >
    > p.s.: Excuse me for my English


    Looks like link isn't being established, and autoselect is resorting to
    10BT/half.

    Can you provide pciconf -lv output?

    CC'ing PYUN Yong-Hyeon (surname Pyun), who helps maintain this driver.
    He might have some patches for you.

    --
    | Jeremy Chadwick jdc at parodius.com |
    | Parodius Networking http://www.parodius.com/ |
    | UNIX Systems Administrator Mountain View, CA, USA |
    | Making life hard for others since 1977. PGP: 4BD6C0CB |

    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/lis...freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"


  2. Re: if_re is broken on RELENG_7 ?

    Thu, 2 Oct 2008 01:08:27 -0700
    Jeremy Chadwick wrote:

    > On Thu, Oct 02, 2008 at 10:26:00AM +0300, Sergey V. Dyatko wrote:
    > > Hi list,
    > > I have ASUS a6m laptop with integrated RTL8168/8111 PCI-E Gigabit
    > > Ethernet NIC, long time ago (7.0-CURRENT - 7.0-prerelease) I used
    > > it. Than I started to enjoy BCM43XX wi-fi adapter and now I recently
    > > decided to revert to the use of realtek adapter. But it doesn't
    > > work. I'm just not running a network card or at all does not work?
    > >
    > > some additional information:
    > > ifconfig shows such information, regardless of whether the cable is
    > > connected:
    > >
    > > %ifconfig re0
    > > re0: flags=8802 metric 0 mtu 1500
    > > options=389b
    > > ether 00:1a:92:ca:b3:bc
    > > media: Ethernet autoselect (10baseT/UTP )
    > > status: no carrier
    > >
    > > [tiger@notebook]~%pciconf -lv | grep re0 -A 4
    > > re0@pci0:2:0:0: class=0x020000 card=0x11f51043 chip=0x816810ec
    > > rev=0x01 hdr=0x00 vendor = 'Realtek Semiconductor'
    > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    > > class = network
    > > subclass = ethernet
    > > dmesg output: http://tiger.byfly.by/files/dmesg.boot
    > > kernel config: http://tiger.byfly.by/files/tiger-asus-a6m
    > >
    > > p.s.: Excuse me for my English

    >
    > Looks like link isn't being established, and autoselect is resorting
    > to 10BT/half.
    >
    > Can you provide pciconf -lv output?
    >


    sure, http://tiger.byfly.by/files/pciconf.txt


    > CC'ing PYUN Yong-Hyeon (surname Pyun), who helps maintain this driver.
    > He might have some patches for you.
    >





    --
    wbr, tiger
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/lis...freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"


+ Reply to Thread