Re: FAILURE FLUSHCACHE48 time out - FreeBSD

This is a discussion on Re: FAILURE FLUSHCACHE48 time out - FreeBSD ; On Mon, Jun 23, 2008 at 2:56 PM, Vladimir Ermakov wrote: > Hello > > description of my trouble: > > > uname > =========================================== > FreeBSD spectrum 8.0-CURRENT FreeBSD 8.0-CURRENT #8: Sun Jun 22 > 17:15:01 MSD 2008 root@spectrum:/usr/obj/usr/src/sys/SPECTRUM ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Re: FAILURE FLUSHCACHE48 time out

  1. Re: FAILURE FLUSHCACHE48 time out

    On Mon, Jun 23, 2008 at 2:56 PM, Vladimir Ermakov wrote:
    > Hello
    >
    > description of my trouble:
    >
    >
    > uname
    > ===========================================
    > FreeBSD spectrum 8.0-CURRENT FreeBSD 8.0-CURRENT #8: Sun Jun 22
    > 17:15:01 MSD 2008 root@spectrum:/usr/obj/usr/src/sys/SPECTRUM
    > i386
    > ============================================
    >
    >
    > dmesg
    > ============================================
    > Copyright (c) 1992-2008 The FreeBSD Project.
    > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    > The Regents of the University of California. All rights reserved.
    > FreeBSD is a registered trademark of The FreeBSD Foundation.
    > FreeBSD 8.0-CURRENT #8: Sun Jun 22 17:15:01 MSD 2008
    > root@spectrum:/usr/obj/usr/src/sys/SPECTRUM
    > Timecounter "i8254" frequency 1193182 Hz quality 0
    > CPU: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz (2394.02-MHz 686-class CPU)
    > Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
    > Features=0xbfebfbff
    > Features2=0x8e3bd>
    > AMD Features=0x20000000
    > AMD Features2=0x1
    > Cores per package: 2
    > real memory = 2129330176 (2030 MB)
    > avail memory = 2071609344 (1975 MB)
    > ACPI APIC Table:
    > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
    > cpu0 (BSP): APIC ID: 0
    > cpu1 (AP): APIC ID: 1
    > ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero
    > address or length: 0 102C/0 [20070320]
    > ioapic0: Changing APIC ID to 1
    > ioapic0 irqs 0-23 on motherboard
    > kbd1 at kbdmux0
    > acpi0: on motherboard
    > acpi0: [ITHREAD]
    > acpi_ec0: port 0x62,0x66 on acpi0
    > acpi0: Power Button (fixed)
    > acpi0: reservation of 0, a0000 (3) failed
    > acpi0: reservation of 100000, 7ef00000 (3) failed
    > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
    > pcib0: port 0xcf8-0xcff on acpi0
    > pci0: on pcib0
    > pcib1: irq 16 at device 1.0 on pci0
    > pci1: on pcib1
    > vgapci0: port 0x2000-0x207f mem
    > 0xd6000000-0xd6ffffff,0xe0000000-0xefffffff,0xd4000000-0xd5ffffff irq
    > 16 at device 0.0 on pci1
    > acpi_video0: on vgapci0
    > nvidia0: on vgapci0
    > vgapci0: child nvidia0 requested pci_enable_busmaster
    > vgapci0: child nvidia0 requested pci_enable_io
    > nvidia0: [GIANT-LOCKED]
    > nvidia0: [ITHREAD]
    > em0: port 0x1840-0x185f
    > mem 0xfe200000-0xfe21ffff,0xfe225000-0xfe225fff irq 20 at device 25.0
    > on pci0
    > em0: Using MSI interrupt
    > em0: [FILTER]
    > em0: Ethernet address: 00:1c:25:76:92:48
    > pci0: at device 26.0 (no driver attached)
    > pci0: at device 26.1 (no driver attached)
    > pci0: at device 26.7 (no driver attached)
    > pcm0: mem
    > 0xfe220000-0xfe223fff irq 17 at device 27.0 on pci0
    > pcm0: [ITHREAD]
    > pcib2: irq 20 at device 28.0 on pci0
    > pci2: on pcib2
    > pcib3: irq 21 at device 28.1 on pci0
    > pci3: on pcib3
    > iwn0: mem 0xdf2fe000-0xdf2fffff irq 17
    > at device 0.0 on pci3
    > iwn0: Reg Domain: MoW2, address 00:1d:e0:9b:ba:89
    > iwn0: [ITHREAD]
    > iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    > iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    > iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
    > 24Mbps 36Mbps 48Mbps 54Mbps
    > iwn0: 11na MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps
    > 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
    > iwn0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps
    > 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
    > pcib4: irq 22 at device 28.2 on pci0
    > pci4: on pcib4
    > pcib5: irq 23 at device 28.3 on pci0
    > pci5: on pcib5
    > pcib6: irq 20 at device 28.4 on pci0
    > pci13: on pcib6
    > pci0: at device 29.0 (no driver attached)
    > pci0: at device 29.1 (no driver attached)
    > pci0: at device 29.2 (no driver attached)
    > pci0: at device 29.7 (no driver attached)
    > pcib7: at device 30.0 on pci0
    > pci21: on pcib7
    > pci21: at device 0.0 (no driver attached)
    > pci21: at device 0.1 (no driver attached)
    > pci21: at device 0.2 (no driver attached)
    > pci21: at device 0.3 (no driver attached)
    > pci21: at device 0.4 (no driver attached)
    > pci21: at device 0.5 (no driver attached)
    > isab0: at device 31.0 on pci0
    > isa0: on isab0
    > atapci0: port
    > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1830-0x183f at device 31.1 on
    > pci0
    > ata0: on atapci0
    > ata0: [ITHREAD]
    > ata1: on atapci0
    > ata1: [ITHREAD]
    > atapci1: port
    > 0x1c48-0x1c4f,0x1c1c-0x1c1f,0x1c40-0x1c47,0x1c18-0x1c1b,0x1c20-0x1c3f
    > mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0
    > atapci1: [ITHREAD]
    > atapci1: AHCI Version 01.10 controller with 3 ports PM not supported
    > ata2: on atapci1
    > ata2: [ITHREAD]
    > ata3: on atapci1
    > ata3: port not implemented
    > ata3: [ITHREAD]
    > ata4: on atapci1
    > ata4: [ITHREAD]
    > pci0: at device 31.3 (no driver attached)
    > acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0
    > Timecounter "HPET" frequency 14318180 Hz quality 900
    > cpu0: on acpi0
    > est0: on cpu0
    > p4tcc0: on cpu0
    > cpu1: on acpi0
    > est1: on cpu1
    > p4tcc1: on cpu1
    > acpi_lid0: on acpi0
    > acpi_button0: on acpi0
    > acpi_tz0: on acpi0
    > acpi_tz1: on acpi0
    > atrtc0: port 0x70-0x71 irq 8 on acpi0
    > atkbdc0: port 0x60,0x64 irq 1 on acpi0
    > atkbd0: irq 1 on atkbdc0
    > kbd0 at atkbd0
    > atkbd0: [GIANT-LOCKED]
    > atkbd0: [ITHREAD]
    > psm0: irq 12 on atkbdc0
    > psm0: [GIANT-LOCKED]
    > psm0: [ITHREAD]
    > psm0: model Generic PS/2 mouse, device ID 0
    > battery0: on acpi0
    > acpi_acad0: on acpi0
    > acpi_ibm0: on acpi0
    > pmtimer0 on isa0
    > orm0: at iomem 0xc0000-0xcefff,0xe0000-0xeffff pnpid
    > ORM0000 on isa0
    > sc0: at flags 0x100 on isa0
    > sc0: VGA <16 virtual consoles, flags=0x300>
    > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    > Timecounters tick every 1.000 msec
    > ad4: 152627MB at ata2-master SATA150
    > pcm0:
    > pcm0:
    > unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
    > unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
    > cd0 at ata0 bus 0 target 0 lun 0
    > cd0: Removable CD-ROM SCSI-0 device
    > cd0: 3.300MB/s transfers
    > cd0: Attempt to query device size failed: NOT READY, Medium not present
    > SMP: AP CPU #1 Launched!
    > Trying to mount root from ufs:/dev/ad4s1a
    > wlan0: Ethernet address: 00:1d:e0:9b:ba:89
    > wlan0: link state changed to UP
    > iwn0: need multicast update callback
    > iwn0: need multicast update callback
    > iwn0: need multicast update callback
    > iwn0: need multicast update callback
    > link_elf: symbol dev2unit undefined
    > ===========================================
    >
    >
    > end of system reboot procedure
    > ======================================
    > ad4: FAILURE FLUSHCACHE48 time out
    > Rebuting ...
    > ======================================
    >
    > please, any solution?
    >
    > /Vladimir Ermakov


    If you've just recompiled your kernel, I'd also recompile world too.

    Or were you running the Linux compat by chance?

    -Garrett
    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/lis...reebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"


  2. Re: FAILURE FLUSHCACHE48 time out

    Garrett Cooper wrote:
    > On Mon, Jun 23, 2008 at 2:56 PM, Vladimir Ermakov wrote:
    >
    >>
    >>
    >> end of system reboot procedure
    >> ======================================
    >> ad4: FAILURE FLUSHCACHE48 time out
    >> Rebuting ...
    >> ======================================
    >>
    >> please, any solution?
    >>
    >> /Vladimir Ermakov
    >>

    >
    > If you've just recompiled your kernel, I'd also recompile world too.
    >
    > Or were you running the Linux compat by chance?
    >
    > -Garrett
    >
    >


    Linux compat

    /Vladimir Ermakov

    _______________________________________________
    freebsd-current@freebsd.org mailing list
    http://lists.freebsd.org/mailman/lis...reebsd-current
    To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"


+ Reply to Thread