Re: Help choosing a good PCI PIDE controller
On Wed, Mar 12, 2008 at 12:36:19PM +0200, Anton - Valqk wrote:[color=blue]
> Hi there group,
> I have a P 233MHZ machine running as rouer,
> I have attached a second drive for a storage but the IDE controller on the
> mother board is very old and slow (UDMA33).
> The disk is new and have 16MB cache, but the IDE is very slow and have very
> bad performace - about 1.3MB/s.
> I want to attach a PCI PATA IDE controller (I'm running 6.3) that will be
> rock solid.
> can you please recommend me a good card?[/color]
Many people have had good success (while within a limited budget) with
PATA and SATA cards from Promise Technologies.
1) Their RAID controllers *also* do JBOD (non-RAID), which means you can
use them as a standard non-RAID disks (they'll appear in FreeBSD as adX
2) Their Ultra133 TX2 card works fine on 33MHz PCI bus machines; don't
worry about the card being 66MHz, it will downthrottle correctly.
| Jeremy Chadwick jdc at parodius.com |
| Parodius Networking [url]http://www.parodius.com/[/url] |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |
[email]firstname.lastname@example.org[/email] mailing list
To unsubscribe, send any mail to "email@example.com"