This is a discussion on Re: CFT: vr(4) - FreeBSD ; On Monday 03 March 2008, Pyun YongHyeon wrote: > On Sat, Mar 01, 2008 at 11:53:41AM -0500, Mike Tancsa wrote: > > Sorry for late handling. I wanted to solve Milan Obuch's issue first > before committing vr(4). But it ...
On Monday 03 March 2008, Pyun YongHyeon wrote:
> On Sat, Mar 01, 2008 at 11:53:41AM -0500, Mike Tancsa wrote:
> Sorry for late handling. I wanted to solve Milan Obuch's issue first
> before committing vr(4). But it seems that it's not easy to fix
> Milan's issue. :-(
Well, I see some progress there... Today I was able to do some tests again,
and I was able to ping -f another box on the same network for some time. I
tried then csup sources and I got hard hang, again, this time with following
lines on console:
vr0: PCI bus error -- resetting
And no ability to enter kdb, either.
Just for record, I am getting following when kldload'ing if_vr:
port 0x9c00-0x9cff mem
0xfceff000-0xfceff0ff irq 18 at device 8.0 on pci3
vr0: Quirks: 0x6
vr0: Revision: 0x96
PHY 1 on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
(one out of four devices shown)
> > At 07:30 PM 2/27/2008, Pyun YongHyeon wrote:
> > >I never thought this kind of testing. It's good to hear vr(4)
> > >recovers from the abrupt link change events. I guess this also
> > >indicates the overhauled vr(4) can close lots of PR for vr(4).
> > BTW, any chance of these fixes being backported to RELENG_7 and
> > RELENG_6 ? Its not just media speed changes that causes the nic to
> I'm sure I'll MFC the change to RELENG_7 but not sure it could be
> done on RELENG_6 due to lack of spare time.
In my eyes, if new vr works for others and no regression was found, it should
go in. I did not encountered a regression - it did not work with old driver,
it does not work (yet) with the new... but I hope we can get this one
Address this mail is sent from is used only for this mailing list.
Do not send any messages to it directly as a response, reply only
to mailing list. For mail to me personally, use milan in address instead.
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "email@example.com"