This is a discussion on Re: CFT: vr(4) - FreeBSD ; On Mon, Feb 18, 2008 at 05:18:01PM +0900, To Milan Obuch wrote: > On Sun, Feb 17, 2008 at 03:17:26PM +0100, Milan Obuch wrote: > > On Sunday 17 February 2008, Milan Obuch wrote: > > > On Sunday 17 ...
On Mon, Feb 18, 2008 at 05:18:01PM +0900, To Milan Obuch wrote:
> On Sun, Feb 17, 2008 at 03:17:26PM +0100, Milan Obuch wrote:
> > On Sunday 17 February 2008, Milan Obuch wrote:
> > > On Sunday 17 February 2008, Robert Watson wrote:
> > > > On Sat, 16 Feb 2008, Milan Obuch wrote:
> > > > >> I have tested 4-port Rhine III(6105LOM) and I never seen this hangs.
> > > > >> Does this also happen on other network interface too? When the system
> > > > >> hangs, would you break into DDB and show me the output of 'show
> > > > >> alllocks' and 'ps'?
> > > > >
> > > > > I need some tests with another box. I was not able to break into DDB.
> > > > > Ctrl-Alt-Esc worked until hang. Hang was really hard, Ctrl-Alt-Esc did
> > > > > not invoke DDB. I do not feel if_vr is culprit here, more probably PCI
> > > > > bus got somehow locked, but I have no idea how could I test it
> > > > > currently.
> > > >
> > > > FYI, there are known issues with the effectiveness of syscons
> > > > ctrl-alt-esc to get into the debugger -- if you haven't tried with a
> > > > serial break on a serial console, you might want to do so. This is
> > > > because syscons's interrupt handler acquires the Giant lock in an
> > > > ithread, requiring a lot more things to be happy to succeed. In
> > > > constrast, sio (and friends) use fast interrupt handlers and no Giant
> > > > lock on the way to processing the break request. It may well be that a
> > > > serial break doesn't get into DDB for you, but it's worth trying...
> > > >
> > > > Robert N M Watson
> > > > Computer Laboratory
> > > > University of Cambridge
> > >
> > > You are right, after rebuilding kernel with BREAK_TO_DEBUGGER I am able to
> > > get requested data. BTW, I can't find just now what ALT_BREAK_TO_DEBUGGER
> > > means...
> > >
> > > After kldload if_vr, dhclient vr0 and ping -f
in a minute
> > > system freezes.
> > >
> > Correction... as I moved cable from on-board re0 to vr0, system remembered arp
> > table entry and did not actually try to use vr0. Now I repeated it, but boot
> > system with cable in vr0. This time it hangs right after ping <>, and break
> > does not enter debugger... hard hang. I tried it twice, the same result...
> > So no data to check, actually, only hard hang.
> I've put up a new version under the old URL.
> It's not tested in sparc64 but it seems to work on i386.
> Would you give it spin?
Any progress here? Does the updated one works on your box?
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "email@example.com"