Hello,

Pyun YongHyeon wrote:
> On Tue, Oct 30, 2007 at 04:01:04PM +0200, Oleg Lomaka wrote:
>
> [...]
>
> > I had RxFIFO overrun again
> > from dmest:
> > msk0: Rx FIFO overrun!

>
> [...]
>
> Please try attached patch again. Sorry for the trouble.
> After applying the patch show me verbosed dmesg output related with
> msk(4)/PHY driver.
>
> Thanks for testing.
>

pcib1: irq 16 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: no prefetched decode
pci2: on pcib1
pci2: domain=0, physical bus=2
found-> vendor=0x11ab, dev=0x4352, revid=0x14
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type Memory, range 64, base 0xd0100000, size 14, enabled
pcib1: requested memory range 0xd0100000-0xd0103fff: good
map[18]: type I/O Port, range 32, base 0x2000, size 8, enabled
pcib1: requested I/O range 0x2000-0x20ff: in range
pcib1: slot 0 INTA routed to irq 16
mskc0: port 0x2000-0x20ff mem
0xd0100000-0xd0103fff irq 16 at device 0.0 on pci2
mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd0100000
mskc0: MSI count : 2
mskc0: RAM buffer size : 4KB
mskc0: Port 0 : Rx Queue 2KB(0x00000000:0x000007ff)
mskc0: Port 0 : Tx Queue 2KB(0x00000800:0x00000fff)
msk0: on mskc0
msk0: bpf attached
msk0: Ethernet address: 00:1b:24:0e:bc:26
miibus0: on msk0
e1000phy0: PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
mskc0: [MPSAFE]
mskc0: [FILTER]

_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/lis...freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"