--nextPart2916183.KU7U9Qqipb
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

On Friday 09 November 2007, Benjamin Close wrote:
> Rene Ladan wrote:
> > 2007/11/8, Rene Ladan :
> >> Alexandre "Sunny" Kovalenko schreef:
> >>> On Wed, 2007-11-07 at 22:13 +0100, Rene Ladan wrote:
> >>>> Bachilo Dmitry schreef:
> >>>>> Hello all.
> >>>>> I always used USB cardreaders and had no problem with it, but now
> >>>>> in my notebook I have a cardreader, that appears to be onboard
> >>>>> PCI device. And so FreeBSD sees it as this:
> >>>>> pci6: at device 4.1 (no driver attached)
> >>>>> pci6: at device 4.2 (no driver attached)
> >>>>> pci6: at device 4.3 (no driver attached)
> >>>>> pci6: at device 4.4 (no driver attached)
> >>>>>
> >>>>>
> >>>>> That's even more odd because three are recognized as flash and
> >>>>> one is not. pciconf -lv shows this:
> >>>>>
> >>>>> none13@pci6:4:1: class=3D0x050100 card=3D0x009f1025
> >>>>> chip=3D0x05301524 rev=3D0x01 hdr=3D0x00
> >>>>> vendor =3D 'ENE Technology Inc'
> >>>>> device =3D 'PCI Memory Stick Card Reader Controller'
> >>>>> class =3D memory
> >>>>> subclass =3D flash
> >>>>>
> >>>>> Well, in 7.0-CURRENT it showed all four devices and now in BETA-2
> >>>>> only this one.
> >>>>
> >>>> On my 8.0-CURRENT box (20071105) it shows all four devices:
> >>>>
> >>>> cbb0@pci0:4:1:0: class=3D0x060700 card=3D0x14371043
> >>>> chip=3D0x04761180 rev=3D0xb3 hdr=3D0x02 vendor =3D 'Ricoh Compan=

y,
> >>>> Ltd.'
> >>>> device =3D 'unknown Ricoh R/RL/5C476(II)'
> >>>> class =3D bridge
> >>>> subclass =3D PCI-CardBus
> >>>> fwohci0@pci0:4:1:1: class=3D0x0c0010 card=3D0x14371043
> >>>> chip=3D0x05521180 rev=3D0x08 hdr=3D0x00 vendor =3D 'Ricoh Compan=

y,
> >>>> Ltd.'
> >>>> device =3D 'RL5c552 IEEE-1394 Controller'
> >>>> class =3D serial bus
> >>>> subclass =3D FireWire
> >>>> none0@pci0:4:1:2: class=3D0x080500 card=3D0x14371043
> >>>> chip=3D0x08221180 rev=3D0x17 hdr=3D0x00 vendor =3D 'Ricoh Compan=

y,
> >>>> Ltd.'
> >>>> device =3D 'R5C832, R5C843 SDA Standard Compliant SD Host
> >>>> Controller' class =3D base peripheral
> >>>> none1@pci0:4:1:3: class=3D0x088000 card=3D0x14371043
> >>>> chip=3D0x05921180 rev=3D0x08 hdr=3D0x00 vendor =3D 'Ricoh Compan=

y,
> >>>> Ltd.'
> >>>> device =3D '13871043 Ricoh Memory Stick Host Controller'
> >>>> class =3D base peripheral
> >>>>
> >>>>> Is there any way I can make them work?
> >>>>
> >>>> You can add these lines to your kernel configuration:
> >>>>
> >>>> device mmc
> >>>> device mmcsd
> >>>>
> >>>> But don't expect any magic. mmc(4) and mmcsd(4) tell that nothing
> >>>> currently works, which seems to be true on my Asus A6JE (using a
> >>>> Kingston micro-SD card with adapter).
> >>>>
> >>>> imp@ is the last person who touched the driver which lives in
> >>>> /usr/src/sys/dev/mmc/
> >>>
> >>> Thing below is on my list to try out when I get enough breathing
> >>> room (or when I would have a dire need to read SD cards on my
> >>> ThinkPad X60 . Did you, by any chance, try it? Any experiences to
> >>> share?
> >>>
> >>> http://www.freebsd.org/cgi/getmsg.cg...=3D17399+21119
> >>> +/usr/local/www/db/text/2007/freebsd-mobile/20070916.freebsd-mobile
> >>
> >> Not yet, I didn't see the message until now since I'm not (yet) on
> >> the mobile list. A quick try showed that it does not compile on my
> >> box. I'll investigate why. The author did not leave an email
> >> address in the files.

> >
> > The short story is bus_setup_intr() gained some parameters, I'll
> > figure out which. According to a blog at bsdimp.blogspot.com, Ricoh
> > based readers should work with this driver

>
> The attached patch gets it compiling but I think there might be some
> locking issues still as I got an immediate panic at module load. Not
> sure who put up the tar.gz but I know Max has done some work porting it
> from OpenBSD in p4:
>
> http://perforce.freebsd.org/changeLi...C=3D//depot/u=

se
>r/mlaier/sdmmc/sys/...


Nah, that's crap. Never got anywhere. Just me toying around.

>
> diff -ur sdmmc-20070627/dev/sdmmc/sdshc.c
> sdmmc-20070627-devel/dev/sdmmc/sdshc.c
> --- sdmmc-20070627/dev/sdmmc/sdshc.c 2007-06-25 19:55:52.000000000
> +0930 +++ sdmmc-20070627-devel/dev/sdmmc/sdshc.c 2007-11-09
> 11:45:00.779789122 +1030
> @@ -42,6 +42,8 @@
> #include
> #include
> #include
> +#include
> +#include
>
> #include
> #include
> @@ -342,7 +344,7 @@
> * Hook our interrupt after all initialization is complete.
> */
> LOG(0x10, (dev, "Setup Intr\n"));
> - error =3D bus_setup_intr(dev, sc->irq, INTR_TYPE_NET|INTR_MPSAFE ,
> + error =3D bus_setup_intr(dev, sc->irq, INTR_TYPE_NET|INTR_MPSAFE ,
> NULL, sdshc_intr, sc, &sc->ih);
> if (error !=3D 0) {
> MSG((dev, "could not set up interrupt\n"));
> diff -ur sdmmc-20070627/dev/sdmmc/sdshcbus.c
> sdmmc-20070627-devel/dev/sdmmc/sdshcbus.c
> --- sdmmc-20070627/dev/sdmmc/sdshcbus.c 2007-06-20 03:12:28.000000000
> +0930 +++ sdmmc-20070627-devel/dev/sdmmc/sdshcbus.c 2007-11-09
> 11:49:18.706315189 +1030
> @@ -41,6 +41,8 @@
> #include
> #include
> #include
> +#include
> +#include
>
> #include "sdbus_if.h"




=2D-=20
/"\ Best regards, | mlaier@freebsd.org
\ / Max Laier | ICQ #67774661
X http://pf4freebsd.love2party.net/ | mlaier@EFnet
/ \ ASCII Ribbon Campaign | Against HTML Mail and News

--nextPart2916183.KU7U9Qqipb
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part.

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.4 (FreeBSD)

iD8DBQBHM7shXyyEoT62BG0RAmWsAJkBZbXkX8vFAuO2Da3wUw UbQSgGiACdH5p7
e9CKfIvD9Na+2eZKEAZr34Q=
=nOh4
-----END PGP SIGNATURE-----

--nextPart2916183.KU7U9Qqipb--