> Quick updates:
>
> 1. The marvel patch posted by Xi Lin reconizes PATA drives but doesn't
> fix the speed mismatch on SATA and/or the acd issues (I think that is
> the case for the second issue)... I have 2 PATA drives, 1 SATA HDD and a
> SATA DVD-RW all working fine now (the DVD still experiences the acd
> issues)
>
> --
> Aryeh M. Friedman
> Developer, not business, friendly
> http://www.flosoft-systems.com


I was following along on this discussion and noticed that my SATA drives
are also showing up as 150's. Attached is DMESG output since reboot.
This is an ASUS p5b deluxe motherboard with the ICH8 controller:



and the Micron controller:



Not sure if this is related to this discussion or not.


Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA2 #0: Sat Nov 3 17:13:14 CDT 2007
root@tethys.ringofsaturn.com:/usr/obj/usr/src/sys/SATURN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (2666.68-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff
Features2=0xe3bd
AMD Features=0x20100000
AMD Features2=0x1
Cores per package: 2
real memory = 2616786944 (2495 MB)
avail memory = 2552987648 (2434 MB)
MPTable:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic0 irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
cpu1 on motherboard
pcib0: pcibus 0 on motherboard
pci0: on pcib0
pcib1: irq 16 at device 1.0 on pci0
pci1: on pcib1
vgapci0: port 0x8c00-0x8c7f mem
0xfd000000-0xfdffffff,0xa0000000-0xbfffffff,0xfc000000-0xfcffffff irq 16
at device 0.0 on pci1
uhci0: port 0xdc00-0xdc1f irq 16 at device
26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: on uhci0
usb0: USB revision 1.0
uhub0: on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: port 0xe000-0xe01f irq 17 at device
26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: on uhci1
usb1: USB revision 1.0
uhub1: on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: mem 0xfebffc00-0xfebfffff irq
18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: on ehci0
usb2: USB revision 2.0
uhub2: on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0:
on uhub2
pcm0: mem
0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: irq 16 at device 28.0 on pci0
pci4: on pcib2
pcib3: irq 16 at device 28.4 on pci0
pci3: on pcib3
atapci0: port
0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem
0xfe9fe000-0xfe9fffff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: on atapci0
ata2: [ITHREAD]
ata3: on atapci0
ata3: [ITHREAD]
ata4: on atapci0
ata4: [ITHREAD]
pcib4: irq 17 at device 28.5 on pci0
pci2: on pcib4
mskc0: port 0x9800-0x98ff mem
0xfe8fc000-0xfe8fffff irq 17 at device 0.0 on pci2
msk0: on
mskc0
msk0: Ethernet address: 00:18:f3:b3:b6:bd
miibus0: on msk0
e1000phy0: PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
mskc0: [FILTER]
uhci2: port 0xd480-0xd49f irq 23 at device
29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: on uhci2
usb3: USB revision 1.0
uhub3: on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: port 0xd800-0xd81f irq 19 at device
29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: on uhci3
usb4: USB revision 1.0
uhub4: on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: port 0xd880-0xd89f irq 18 at device
29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: on uhci4
usb5: USB revision 1.0
uhub5: on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: mem 0xfebff800-0xfebffbff irq
23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: on ehci1
usb6: USB revision 2.0
uhub6: on usb6
uhub6: 6 ports with 6 removable, self powered
pcib5: at device 30.0 on pci0
pci5: on pcib5
fwohci0: mem
0xfeaff800-0xfeafffff,0xfeaf8000-0xfeafbfff irq 21 at device 3.0 on pci5
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:f5:92:3c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: on fwohci0
fwe0: on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:f5:92:3c
fwe0: Ethernet address: 02:11:d8:f5:92:3c
sbp0: on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
skc0: port 0xb800-0xb8ff mem
0xfeaf4000-0xfeaf7fff irq 19 at device 4.0 on pci5
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: on skc0
sk0: Ethernet address: 00:18:f3:b3:b2:7c
miibus1: on sk0
e1000phy1: PHY 0 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
skc0: [ITHREAD]
isab0: at device 31.0 on pci0
isa0: on isab0
atapci1: port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f
irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata5: on atapci1
ata5: [ITHREAD]
ata6: on atapci1
ata6: [ITHREAD]
pci0: at device 31.3 (no driver attached)
atapci2: port
0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f
irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata7: on atapci2
ata7: [ITHREAD]
ata8: on atapci2
ata8: [ITHREAD]
pmtimer0 on isa0
orm0: at iomem
0xcf000-0xd07ff,0xd0800-0xd37ff,0xd3800-0xd4fff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: at port 0x60,0x64 on isa0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
fdc0: [FILTER]
ppc0: parallel port not found.
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: can't assign resources (memory)
unknown: can't assign resources (port)
unknown: can't assign resources (port)
unknown: can't assign resources (memory)
uscanner0: on uhub4
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad10: 143089MB at ata5-master SATA150
ad12: 715404MB at ata6-master SATA150
acd0: DVDR at ata7-master SATA150
ad16: 715404MB at ata8-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
pcm0:
pcm0:
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
cd0 at ata7 bus 0 target 0 lun 0
cd0: Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
Trying to mount root from ufs:/dev/ad10s1a
sk0: link state changed to UP
msk0: link state changed to UP
pid 98970 (conftest), uid 0: exited on signal 12 (core dumped)
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 85051 used static ldt allocation.
See the i386_set_ldt man page for more info
free inode /usr/home/4499196 had 672 blocks
free inode /usr/home/4499219 had 328 blocks


_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/lis...reebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"