Firewall routing for P2P routers - Firewalls

This is a discussion on Firewall routing for P2P routers - Firewalls ; I recently had to reset to factory defaults on my watchguard SOHO 6 firewall and lost all my routes I had setup for two P2P locations. I thought I remembered how this was setup before but cant' seem to figure ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: Firewall routing for P2P routers

  1. Firewall routing for P2P routers

    I recently had to reset to factory defaults on my watchguard SOHO 6
    firewall and lost all my routes I had setup for two P2P locations. I
    thought I remembered how this was setup before but cant' seem to
    figure it out.

    Here is our current setup.

    Main Location --> LAN IP Address - 192.168.111.3/24
    Serial 0/0 IP - 172.16.2.1/30 (P2P Location #1)
    Serial 0/1 IP - 172.16.3.1/30 (P2P Location #2)
    IP Address Range - 192.168.111.1-254
    Subnet - 255.255.255.0
    Gateway Address - 192.168.111.1 (Firewall)


    P2P Location #1 --> LAN IP Address - 192.168.1.2/24
    Serial 0 IP - 172.16.2.2/30
    IP Gateway Address - 192.168.1.2
    IP Address Range - 192.168.1.1-254
    Subnet - 255.255.255.0

    P2P Location #2 --> LAN IP Address - 192.168.3.1/24
    Serial 1 IP - 172.16.3.2/30
    IP Gateway Address - 192.168.2.1
    IP Address Range - 192.168.2.1-254
    Subnet - 255.255.255.0

    All P2P routers are configured correctly and up and running. I believe
    it is just the firewall blocking the connection to the main location.
    Thank you in advance for your help.


  2. Re: Firewall routing for P2P routers

    On Apr 8, 5:10 am, "jeff" wrote:
    > I recently had to reset to factory defaults on my watchguard SOHO 6
    > firewall and lost all my routes I had setup for two P2P locations. I
    > thought I remembered how this was setup before but cant' seem to
    > figure it out.
    >
    > Here is our current setup.
    >
    > Main Location --> LAN IP Address - 192.168.111.3/24
    > Serial 0/0 IP - 172.16.2.1/30 (P2P Location #1)
    > Serial 0/1 IP - 172.16.3.1/30 (P2P Location #2)
    > IP Address Range - 192.168.111.1-254
    > Subnet - 255.255.255.0
    > Gateway Address - 192.168.111.1 (Firewall)
    >
    > P2P Location #1 --> LAN IP Address - 192.168.1.2/24
    > Serial 0 IP - 172.16.2.2/30
    > IP Gateway Address - 192.168.1.2
    > IP Address Range - 192.168.1.1-254
    > Subnet - 255.255.255.0
    >
    > P2P Location #2 --> LAN IP Address - 192.168.3.1/24
    > Serial 1 IP - 172.16.3.2/30
    > IP Gateway Address - 192.168.2.1
    > IP Address Range - 192.168.2.1-254
    > Subnet - 255.255.255.0
    >
    > All P2P routers are configured correctly and up and running. I believe
    > it is just the firewall blocking the connection to the main location.
    > Thank you in advance for your help.


    so what is the problem you are having? no traffic getting through to
    the main site?? what are the results of a traceroute?

    Flamer.


  3. Re: Firewall routing for P2P routers

    On Apr 9, 11:34 pm, "flamer die.s...@hotmail.com"
    wrote:
    > On Apr 8, 5:10 am, "jeff" wrote:
    >
    >
    >
    >
    >
    > > I recently had to reset to factory defaults on my watchguard SOHO 6
    > > firewall and lost all my routes I had setup for two P2P locations. I
    > > thought I remembered how this was setup before but cant' seem to
    > > figure it out.

    >
    > > Here is our current setup.

    >
    > > Main Location --> LAN IP Address - 192.168.111.3/24
    > > Serial 0/0 IP - 172.16.2.1/30 (P2P Location #1)
    > > Serial 0/1 IP - 172.16.3.1/30 (P2P Location #2)
    > > IP Address Range - 192.168.111.1-254
    > > Subnet - 255.255.255.0
    > > Gateway Address - 192.168.111.1 (Firewall)

    >
    > > P2P Location #1 --> LAN IP Address - 192.168.1.2/24
    > > Serial 0 IP - 172.16.2.2/30
    > > IP Gateway Address - 192.168.1.2
    > > IP Address Range - 192.168.1.1-254
    > > Subnet - 255.255.255.0

    >
    > > P2P Location #2 --> LAN IP Address - 192.168.3.1/24
    > > Serial 1 IP - 172.16.3.2/30
    > > IP Gateway Address - 192.168.2.1
    > > IP Address Range - 192.168.2.1-254
    > > Subnet - 255.255.255.0

    >
    > > All P2P routers are configured correctly and up and running. I believe
    > > it is just the firewall blocking the connection to the main location.
    > > Thank you in advance for your help.

    >
    > so what is the problem you are having? no traffic getting through to
    > the main site?? what are the results of a traceroute?
    >
    > Flamer.- Hide quoted text -
    >
    > - Show quoted text -


    correct...figured it out yesterday. setup host routes on the firewall
    like these:

    192.168.1.2 --> 192.168.111.3
    192.168.2.1 --> 192.168.111.3
    192.168.111.3 --> 192.168.1.2
    192.168.111.3 --> 192.168.2.1


+ Reply to Thread