Mike,

Take a look at Expect: http://en.wikipedia.org/wiki/Expect

I know it can be used to access many devices and make the same config =

change over and over. That may help automate your needed changes to all =

your sites.

Good Luck,
-d

Mike Davis wrote:
>
> This is my first posting so be gentle ;-)
>
> I have an environment that is all Cisco based firewalls for my edge =


> protection and site to site vpns. I have a little over 100 remote =


> sites running on ASA 5505=92s with an AES Tunnel to both the primary =


> (HQ) and secondary (DR ) sites. It is working quite nicely and has =


> been for years now but the problem I have is this=85 all my remote site =


> firewalls are not centrally managed in the sense that I can make one =


> change in a console and push it globally to all my remote firewalls so =


> that when a change is required, I have to log into each and every one =


> (I use SSH) and make the changes.
>
> I know that Cisco Security Manager will allow me to do that but at the =


> 100K pricetag I was quoted from Cisco with the blink of an eye=85 I just =


> cannot put that into my budget.
>
> Does anyone know of or can recommend any freeware or low-cost-ware =


> application that will allow me to monitor and make global config =


> changes without having to SSH to each one? The ability to segregate =


> into groups and manage based upon groups would certainly be a plus as =


> well but not a requirement.
>
> Thanks in advance!
>
> *Mike Davis*
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> firewall-wizards mailing list
> firewall-wizards@listserv.icsalabs.com
> https://listserv.icsalabs.com/mailma...rewall-wizards
> =


_______________________________________________
firewall-wizards mailing list
firewall-wizards@listserv.icsalabs.com
https://listserv.icsalabs.com/mailma...rewall-wizards