Best regards firewall list readers!

We have a Cisco pix 506E running software version 6.3 (5)

We also have a VOIP server on the internal network at 192.168.1.6.=A0 We ne=
ed to NAT a range of TCP ports to this VOIP server.=A0 The port range is 49=
152 through 49214.

The connections come in from the internet and need to be natted through the=
pix to this internal VOIP server.
We believe we already have the access list rules in place to allow the conn=
ections.=A0 We just need a translation rule to allow this group of ports.


The IP address of the internal interface on the pix is 192.168.1.2

The command that is not working is:

static (inside,outside) x.x.x.x 192.168.1.6

We are currently getting this error when trying to setup the rule.

WARNING: mapped-address conflict with existing static
tcp from inside:server/80 to outside:x.x.x.x/80 netmask 255.255.255.2
55
WARNING: mapped-address conflict with existing static
tcp from inside:server/25 to outside:x.x.x.x/25 netmask 255.255.255.2
55
WARNING: mapped-address conflict with existing static
tcp from inside:server/110 to outside:x.x.x.x/110 netmask 255.255.255
..255

Any insight is appreciated.
Thanks to all.
_______________________________________________
firewall-wizards mailing list
firewall-wizards@listserv.icsalabs.com
https://listserv.icsalabs.com/mailma...rewall-wizards