Hi list

I have my routing rules as so

/sbin/ip route add 196.36.10.113 dev eth0 src 196.36.10.114 table IS
/sbin/ip route add default via 196.36.10.113 table IS

/sbin/ip route add 192.168.10.200 dev eth2 src 192.168.10.100 table TELKOM
/sbin/ip route add default via 192.168.10.200 table TELKOM

/sbin/ip route add 196.36.10.113 dev eth0 src 196.36.10.114
/sbin/ip route add 192.168.10.200 dev eth2 src 192.168.10.100

/sbin/ip route add default via 196.36.10.113

/sbin/ip rule add from 196.36.10.114 table IS
/sbin/ip rule add from 192.168.10.100 table TELKOM

/sbin/ip rule add fwmark 1 table TELKOM

apart from the rest of my firewall ruleset

I have an entry as :

$IPT -t nat -A PREROUTING -i eth1 -t mangle -p tcp --dport 80 -j MARK --set-mark 1
$IPT -t filter -A FORWARD -i eth1 -o eth2 -m multiport -p tcp --dport 80,443 -m state --state NEW -j ACCEPT

My browser cant seem to connect to a webserver.

Probally a routing issue, as I see that I dont get any messages in syslog of FORWARD complaining.

If anyone could help, it would be most appreciated.

Kind Regards
Brent Clark



_______________________________________________
firewall-wizards mailing list
firewall-wizards@honor.icsalabs.com
http://honor.icsalabs.com/mailman/li...rewall-wizards