Yes thanks Lou, for the response. I actually had to stop and start the
server a coupled of time. Just one of those weird problems where something
happens that doesn't make sense. 30 min later is works after a couple of
restarts.

Thanks again.

Thanks,

----------------------------------------------------
Paul Amaral
MegaNet Communications
P: 508 646 0030
-----------------------------------------------------

> -----Original Message-----
> From: bind-users-bounce@isc.org [mailto:bind-users-bounce@isc.org] On
> Behalf Of Lou Goddard
> Sent: Thursday, December 09, 2004 12:19 PM
> To: Paul A; bind-users@isc.org
> Subject: RE: Non-authoritative problem
>
> Its working. Did you happen to /just/ fix it?
>
> -bash-2.05b$ dig @ns1.bos.ma.meganet.net. ci.malden.ma.us NS
>
> ; <<>> DiG 9.2.3 <<>> @ns1.bos.ma.meganet.net. ci.malden.ma.us NS
> ;; global options: printcmd
> ;; Got answer:
> ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 3348
> ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 3
>
> ;; QUESTION SECTION:
> ;ci.malden.ma.us. IN NS
>
> ;; ANSWER SECTION:
> ci.malden.ma.us. 86400 IN NS reuben.meganet.net.
> ci.malden.ma.us. 86400 IN NS ns1.bos.ma.meganet.net.
> ci.malden.ma.us. 86400 IN NS ns1.prv.ri.meganet.net.
>
> ;; ADDITIONAL SECTION:
> ns1.bos.ma.meganet.net. 86400 IN A 209.213.72.9
> ns1.prv.ri.meganet.net. 86400 IN A 209.213.80.9
> reuben.meganet.net. 86400 IN A 209.213.64.2
>
> ;; Query time: 41 msec
> ;; SERVER: 209.213.72.9#53(ns1.bos.ma.meganet.net.)
> ;; WHEN: Thu Dec 9 12:16:57 2004
> ;; MSG SIZE rcvd: 163
>
> -----Original Message-----
> From: bind-users-bounce@isc.org [mailto:bind-users-bounce@isc.org]On
> Behalf Of Paul A
> Sent: Thursday, December 09, 2004 11:54 AM
> To: bind-users@isc.org
> Subject: Non-authoritative problem
>
>
> I have a domain ci.malden.ma.us which I need to be authoritative for in
> order for the us nic to point the dns server to me.
>
> My dns server are=20
>
> Reuben.meganet.net
> Ns1.bos.ma.meganet.net
> Ns1.prv.ri.meganet.net
>
> I have created a primary zone in reuben and entered them as secondary in
> ns1.bos and ns1.prv. The zones get transferred from reuben to ns1.prv =
> and
> ns1.bos with no problem. The only problem is when I do a dig on =
> ns1.bos.ma I
> get a non-authoritative answer. For reuben and ns1.prv.ri its working =
> fine.
> I used rndc to flush and reload dns, I updated the serial and nothing on
> ns1.bos.ma. the named.conf file is the same on ns1.prv.ri (working) as =
> it is
> on ns1.bos.ma, not working.
>
> Any ideas.
>
> Thanks,
> =20
> ----------------------------------------------------
> Paul Amaral
> MegaNet Communications
> P: 508 646 0030
> -----------------------------------------------------
>
> > -----Original Message-----
> > From: bind-users-bounce@isc.org [mailto:bind-users-bounce@isc.org] On
> > Behalf Of Uwe Gansert
> > Sent: Thursday, December 09, 2004 7:59 AM
> > To: bind-users@isc.org
> > Subject: Re: nss_lwres and lwresd problem
> >=20
> > On Wednesday 01 December 2004 15:30, Uwe Gansert wrote:
> >=20
> > > I'm not able to make nss_lwres and lwresd work together.
> > > I've installed bind 9.3.0 and nss_lwres 0.93 on an i586 system. =

> In=3D3D20
> > > my /etc/nsswitch.conf I have=3D3D20
> > > hosts: files lwres dns

> >=20
> > BTW, in the meantime I found out that it helps to delete the
> > /etc/lwresd.co=3D
> > nf=3D20
> > file. I did not manage to configure a working version of =

> /etc/lwresd.conf
> > b=3D
> > ut=3D20
> > it seems to work with the built in defaults.
> > Is there some kind of magic in that file? Mine looked like this:
> >=20
> > options {
> > pid-file "/var/run/named/lwres.pid";
> > allow-query { any; };
> > allow-recursion { any; };
> > listen-on port 921 { 127.0.0.1; };
> > };
> >=20
> > logging {
> > channel default_debug {
> > file "/var/run/named/named.run";
> > severity dynamic;
> > };
> > category default {default_syslog; default_debug; };
> > };
> >=20
> > and starting lwresd shows no problems in the log file and it's =

> listening
> > on=3D
> > =3D20
> > 953 and 921.
> >=20
> > =3D2D-=3D20
> > ciao, Uwe Gansert
> >=20
> > Uwe Gansert, Server Technologies Team
> > SUSE LINUX Products GmbH, Maxfeldstrasse 5, D-90409 N=3DFCrnberg, =

> Germany
> > e-mail: uwe.gansert@suse.de, Tel: +49-(0)911-74053-0,
> > =3D46ax: +49-(0)911-74053-476, Web: http://www.suse.de =3D20

>
>
>