FS: VAX gear, incl. SCSI Q-bus card - DEC

This is a discussion on FS: VAX gear, incl. SCSI Q-bus card - DEC ; Digital VAX 4000/300 (will break up for parts) BA440 pedestal enclosure 96 MB RAM (3 cards of 32 MB each) Q-bus cards: TSV05 tape drive interface (M7530-PA) TQK70 tape drive interface (M7559-00) SCSI to Q-bus adapter, CMD brand (view self-test ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: FS: VAX gear, incl. SCSI Q-bus card

  1. FS: VAX gear, incl. SCSI Q-bus card

    Digital VAX 4000/300 (will break up for parts)

    BA440 pedestal enclosure
    96 MB RAM (3 cards of 32 MB each)
    Q-bus cards:
    TSV05 tape drive interface (M7530-PA)
    TQK70 tape drive interface (M7559-00)
    SCSI to Q-bus adapter, CMD brand (view self-test log at
    )
    CXY08-M serial interface card (M3119-YA) and multi-port cable
    TK70 tape drive

    Digital VAXserver 3300

    BA215 pedestal enclosure
    RF72 - 1 GB DSSI hard disk
    Q-bus cards:
    16 MB RAM (for a total of 20 MB)
    KFQSA controller card


    Misc.

    LANcast 4320-11 Ethernet transceiver (AUI to 10Base-T)
    GDT PowerPrint Pro (LocalTalk to Parallel)
    iMix PCI Graphics Card
    on front: ASSY 9400-0023-00, REV-C0
    barcode label on reverse: 0023 1089
    in corner, on rear: PCB 8800-0023-02, 94V-0, LRC-3, 9550

    --
    M J Dowden
    PGP key:
    No Microsoft products were used in the preparation or
    transmission of this message

  2. Re: FS: VAX gear, incl. SCSI Q-bus card

    Hi!

    How much would the SCSI interface be? Would you ship to Germany?

    Thanks,


    Frank

    M J Dowden schrieb:
    >
    > Digital VAX 4000/300 (will break up for parts)
    >
    > BA440 pedestal enclosure
    > 96 MB RAM (3 cards of 32 MB each)
    > Q-bus cards:
    > TSV05 tape drive interface (M7530-PA)
    > TQK70 tape drive interface (M7559-00)
    > SCSI to Q-bus adapter, CMD brand (view self-test log at
    > )
    > CXY08-M serial interface card (M3119-YA) and multi-port cable
    > TK70 tape drive
    >
    > Digital VAXserver 3300
    >
    > BA215 pedestal enclosure
    > RF72 - 1 GB DSSI hard disk
    > Q-bus cards:
    > 16 MB RAM (for a total of 20 MB)
    > KFQSA controller card
    >
    >
    > Misc.
    >
    > LANcast 4320-11 Ethernet transceiver (AUI to 10Base-T)
    > GDT PowerPrint Pro (LocalTalk to Parallel)
    > iMix PCI Graphics Card
    > on front: ASSY 9400-0023-00, REV-C0
    > barcode label on reverse: 0023 1089
    > in corner, on rear: PCB 8800-0023-02, 94V-0, LRC-3, 9550
    >
    > --
    > M J Dowden
    > PGP key:
    > No Microsoft products were used in the preparation or
    > transmission of this message


  3. Re: VAX gear, incl. SCSI Q-bus card

    Where are you located?

    JaYmZ
    "M J Dowden" wrote in message
    news:mjdowden-C05DB6.21111924042005@news.east.cox.net...
    > Digital VAX 4000/300 (will break up for parts)
    >
    > BA440 pedestal enclosure
    > 96 MB RAM (3 cards of 32 MB each)
    > Q-bus cards:
    > TSV05 tape drive interface (M7530-PA)
    > TQK70 tape drive interface (M7559-00)
    > SCSI to Q-bus adapter, CMD brand (view self-test log at
    > )
    > CXY08-M serial interface card (M3119-YA) and multi-port cable
    > TK70 tape drive
    >
    > Digital VAXserver 3300
    >
    > BA215 pedestal enclosure
    > RF72 - 1 GB DSSI hard disk
    > Q-bus cards:
    > 16 MB RAM (for a total of 20 MB)
    > KFQSA controller card
    >
    >
    > Misc.
    >
    > LANcast 4320-11 Ethernet transceiver (AUI to 10Base-T)
    > GDT PowerPrint Pro (LocalTalk to Parallel)
    > iMix PCI Graphics Card
    > on front: ASSY 9400-0023-00, REV-C0
    > barcode label on reverse: 0023 1089
    > in corner, on rear: PCB 8800-0023-02, 94V-0, LRC-3, 9550
    >
    > --
    > M J Dowden
    > PGP key:
    > No Microsoft products were used in the preparation or
    > transmission of this message




+ Reply to Thread