Bug#500758: linux-image-2.6.26-1-amd64: Module budget-ci has no effect - Digital cable TV not supported? - Debian

This is a discussion on Bug#500758: linux-image-2.6.26-1-amd64: Module budget-ci has no effect - Digital cable TV not supported? - Debian ; Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-5 Severity: important -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a DVB-C TV card, the TechnoTrend Budget CVB-C C-1500. Programs like xawtv and scantv don't work. The lspci -vnn output is: ..... 05:04.0 Multimedia controller [0480]: ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: Bug#500758: linux-image-2.6.26-1-amd64: Module budget-ci has no effect - Digital cable TV not supported?

  1. Bug#500758: linux-image-2.6.26-1-amd64: Module budget-ci has no effect - Digital cable TV not supported?

    Package: linux-image-2.6.26-1-amd64
    Version: 2.6.26-5
    Severity: important

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    I have a DVB-C TV card, the TechnoTrend Budget CVB-C C-1500.

    Programs like xawtv and scantv don't work.

    The lspci -vnn output is:

    .....

    05:04.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01)
    Subsystem: Technotrend Systemtechnik GmbH Device [13c2:1010]
    Flags: bus master, medium devsel, latency 32, IRQ 17
    Memory at d4001000 (32-bit, non-prefetchable) [size=512]
    Kernel driver in use: budget_ci dvb
    Kernel modules: budget-ci

    .....

    Is it necessary to install another kernel module?

    Is cable digital supported at all?

    David

    - -- Package-specific info:
    ** Version:
    Linux version 2.6.26-1-amd64 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 15:31:12 UTC 2008

    ** Command line:
    root=/dev/hdb2 ro quiet

    ** Not tainted

    ** Kernel log:
    [ 4.707996] usb-storage: device found at 2
    [ 4.707999] usb-storage: waiting for device to settle before scanning
    [ 4.852010] ata1: SATA link down (SStatus 0 SControl 300)
    [ 5.172014] ata2: SATA link down (SStatus 0 SControl 300)
    [ 5.172500] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
    [ 5.172503] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
    [ 5.172555] PCI: Setting latency timer of device 0000:00:08.0 to 64
    [ 5.172603] scsi3 : sata_nv
    [ 5.172663] scsi4 : sata_nv
    [ 5.172809] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
    [ 5.172811] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
    [ 5.492010] ata3: SATA link down (SStatus 0 SControl 300)
    [ 5.796111] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000064f599]
    [ 5.812012] ata4: SATA link down (SStatus 0 SControl 300)
    [ 5.836922] PM: Starting manual resume from disk
    [ 5.873111] kjournald starting. Commit interval 5 seconds
    [ 5.873122] EXT3-fs: mounted filesystem with ordered data mode.
    [ 7.932009] udevd version 125 started
    [ 9.008248] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
    [ 9.008267] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
    [ 9.124158] input: Power Button (FF) as /class/input/input2
    [ 9.155497] ACPI: Power Button (FF) [PWRF]
    [ 9.155569] input: Power Button (CM) as /class/input/input3
    [ 9.181263] ACPI: Power Button (CM) [PWRB]
    [ 9.705334] usb-storage: device scan complete
    [ 9.714326] scsi 2:0:0:0: Direct-Access GENERIC USB Storage-SMC I19B PQ: 0 ANSI: 0 CCS
    [ 9.721314] scsi 2:0:0:1: Direct-Access GENERIC USB Storage-CFC I19B PQ: 0 ANSI: 0 CCS
    [ 9.728333] scsi 2:0:0:2: Direct-Access GENERIC USB Storage-SDC I19B PQ: 0 ANSI: 0 CCS
    [ 9.735337] scsi 2:0:0:3: Direct-Access GENERIC USB Storage-MSC I19B PQ: 0 ANSI: 0 CCS
    [ 9.787406] Linux video capture interface: v2.00
    [ 9.867882] uvcvideo: Found UVC 1.00 device (041e:4058)
    [ 9.869617] input: UVC Camera (041e:4058) as /class/input/input4
    [ 9.880212] usbcore: registered new interface driver uvcvideo
    [ 9.880216] USB Video Class driver (v0.1.0)
    [ 10.043572] usbcore: registered new interface driver snd-usb-audio
    [ 10.368719] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
    [ 10.368723] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
    [ 10.368742] PCI: Setting latency timer of device 0000:00:04.0 to 64
    [ 10.414580] saa7146: register extension 'budget_ci dvb'.
    [ 10.497746] input: PC Speaker as /class/input/input5
    [ 10.525251] Error: Driver 'pcspkr' is already registered, aborting...
    [ 10.692083] intel8x0_measure_ac97_clock: measured 54785 usecs
    [ 10.692087] intel8x0: clocking to 46959
    [ 10.698040] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    [ 10.698048] ACPI: PCI Interrupt 0000:05:04.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
    [ 10.698082] saa7146: found saa7146 @ mem ffffc200001e8000 (revision 1, irq 17) (0x13c2,0x1010).
    [ 10.698089] saa7146 (0): dma buffer size 192512
    [ 10.698092] DVB: registering new adapter (TT-Budget-C-CI PCI)
    [ 10.732973] adapter has MAC addr = 00:d0:5c:68:39:b2
    [ 10.733303] input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input6
    [ 10.812039] DVB: registering frontend 0 (ST STV0297 DVB-C)...
    [ 10.813403] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    [ 10.813411] ACPI: PCI Interrupt 0000:05:05.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    [ 10.822751] input: PS/2 Logitech Mouse as /class/input/input7
    [ 10.850899] pnp: the driver 'parport_pc' has been registered
    [ 10.850918] parport_pc 00:08: reported by Plug and Play ACPI
    [ 10.850941] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 10.914811] parport0: Printer, HEWLETT-PACKARD DESKJET 940C
    [ 10.914875] parport_pc 00:08: driver attached
    [ 10.991778] Driver 'sd' needs updating - please use bus_type methods
    [ 11.001418] sd 2:0:0:0: [sda] Attached SCSI removable disk
    [ 11.012430] sd 2:0:0:1: [sdb] Attached SCSI removable disk
    [ 11.023414] sd 2:0:0:2: [sdc] Attached SCSI removable disk
    [ 11.034411] sd 2:0:0:3: [sdd] Attached SCSI removable disk
    [ 13.268787] Adding 979924k swap on /dev/hdb1. Priority:-1 extents:1 across:979924k
    [ 13.632312] EXT3 FS on hdb2, internal journal
    [ 14.392014] loop: module loaded
    [ 17.525378] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
    [ 17.525413] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
    [ 17.525415] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
    [ 17.525417] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
    [ 17.525419] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
    [ 20.495445] lp0: using parport0 (interrupt-driven).
    [ 20.516604] ppdev: user-space parallel port driver
    [ 20.744149] Marking TSC unstable due to cpufreq changes
    [ 21.272014] Clocksource tsc unstable (delta = -272725522 ns)
    [ 21.397064] NET: Registered protocol family 10
    [ 21.397507] lo: Disabled Privacy Extensions
    [ 24.064630] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    [ 41.168014] eth0: no IPv6 routers present
    [ 44.701625] NTFS driver 2.1.29 [Flags: R/W MODULE].
    [ 45.168781] NTFS volume version 3.1.
    [ 1296.476194] saa7146: register extension 'budget dvb'.
    [ 1321.424313] saa7146: unregister extension 'budget_ci dvb'.
    [ 1321.448629] ACPI: PCI interrupt for device 0000:05:04.0 disabled
    [ 1375.208271] saa7146: unregister extension 'budget dvb'.
    [ 1385.637816] saa7146: register extension 'budget_ci dvb'.
    [ 1385.640037] ACPI: PCI Interrupt 0000:05:04.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
    [ 1385.640057] saa7146: found saa7146 @ mem ffffc200001e8000 (revision 1, irq 17) (0x13c2,0x1010).
    [ 1385.640064] saa7146 (0): dma buffer size 192512
    [ 1385.640066] DVB: registering new adapter (TT-Budget-C-CI PCI)
    [ 1385.644815] adapter has MAC addr = 00:d0:5c:68:39:b2
    [ 1385.645119] input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input8
    [ 1385.676320] DVB: registering frontend 0 (ST STV0297 DVB-C)...
    [ 1412.957386] usbcore: deregistering interface driver uvcvideo
    [ 1420.852400] Linux video capture interface: v2.00
    [ 1420.877762] uvcvideo: Found UVC 1.00 device (041e:4058)
    [ 1420.885376] input: UVC Camera (041e:4058) as /class/input/input9
    [ 1420.900090] usbcore: registered new interface driver uvcvideo
    [ 1420.900095] USB Video Class driver (v0.1.0)

    ** Loaded modules:
    Module Size Used by
    uvcvideo 55432 0
    compat_ioctl32 12288 1 uvcvideo
    videodev 35840 2 uvcvideo,compat_ioctl32
    v4l1_compat 17284 2 uvcvideo,videodev
    budget_ci 21124 0
    firmware_class 12544 1 budget_ci
    budget_core 15236 1 budget_ci
    dvb_core 82740 2 budget_ci,budget_core
    saa7146 21384 2 budget_ci,budget_core
    ttpci_eeprom 6656 1 budget_core
    ir_common 47108 1 budget_ci
    nls_utf8 6272 1
    ntfs 188544 1
    nls_base 12932 2 nls_utf8,ntfs
    binfmt_misc 13580 1
    ipv6 288328 18
    ppdev 11656 0
    lp 14724 0
    video 24084 0
    output 7808 1 video
    ac 9352 0
    battery 16904 0
    powernow_k8 17156 0
    cpufreq_conservative 11784 0
    cpufreq_stats 9120 0
    cpufreq_powersave 6400 0
    cpufreq_userspace 8452 0
    cpufreq_ondemand 11792 1
    freq_table 9344 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
    loop 19468 0
    sd_mod 29376 0
    stv0297 11648 1
    parport_pc 31016 1
    parport 41776 3 ppdev,lp,parport_pc
    serio_raw 9860 0
    pcspkr 7040 0
    snd_cmipci 39744 1
    k8temp 9216 0
    psmouse 42268 0
    gameport 17040 1 snd_cmipci
    snd_opl3_lib 15104 1 snd_cmipci
    snd_intel8x0 36008 0
    snd_ac97_codec 115416 1 snd_intel8x0
    snd_mpu401_uart 11776 1 snd_cmipci
    ac97_bus 6272 1 snd_ac97_codec
    snd_usb_audio 91296 0
    snd_pcm_oss 41760 0
    snd_mixer_oss 18816 1 snd_pcm_oss
    snd_seq_dummy 7428 0
    snd_seq_oss 33152 0
    snd_pcm 81800 5 snd_cmipci,snd_intel8x0,snd_ac97_codec,snd_usb_aud io,snd_pcm_oss
    snd_usb_lib 20224 1 snd_usb_audio
    snd_hwdep 12040 2 snd_opl3_lib,snd_usb_audio
    snd_seq_midi 11072 0
    snd_rawmidi 26784 3 snd_mpu401_uart,snd_usb_lib,snd_seq_midi
    snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
    snd_seq 54304 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
    snd_timer 25744 3 snd_opl3_lib,snd_pcm,snd_seq
    snd_seq_device 11668 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_mid i,snd_rawmidi,snd_seq
    snd 63688 17 snd_cmipci,snd_opl3_lib,snd_intel8x0,snd_ac97_code c,snd_mpu401_uart,snd_usb_audio,snd_pcm_oss,snd_mi xer_oss,snd_seq_oss,snd_pcm,snd_hwdep,snd_rawmidi, snd_seq,snd_timer,snd_seq_device
    soundcore 12064 1 snd
    snd_page_alloc 13072 2 snd_intel8x0,snd_pcm
    button 11680 0
    i2c_nforce2 10752 0
    i2c_core 27936 5 budget_ci,budget_core,ttpci_eeprom,stv0297,i2c_nfo rce2
    evdev 14208 5
    ext3 124688 1
    jbd 51240 1 ext3
    mbcache 12804 1 ext3
    usb_storage 94400 0
    ide_cd_mod 36360 0
    cdrom 37928 1 ide_cd_mod
    ide_disk 16512 5
    sata_nv 27528 0
    ata_generic 10116 0
    libata 165472 2 sata_nv,ata_generic
    scsi_mod 160760 3 sd_mod,usb_storage,libata
    dock 14112 1 libata
    ohci1394 32564 0
    ieee1394 93816 1 ohci1394
    forcedeth 54032 0
    ide_pci_generic 9220 0 [permanent]
    amd74xx 13448 0 [permanent]
    ide_core 128284 4 ide_cd_mod,ide_disk,ide_pci_generic,amd74xx
    ehci_hcd 36108 0
    ohci_hcd 25092 0
    thermal 22688 0
    processor 42304 2 powernow_k8,thermal
    fan 9352 0
    thermal_sys 17728 4 video,thermal,processor,fan

    ** PCI devices:
    00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
    Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Capabilities:

    00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a3)
    Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0

    00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
    Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Interrupt: pin A routed to IRQ 10
    Region 0: I/O ports at e400 [size=32]
    Region 4: I/O ports at 4c00 [size=64]
    Region 5: I/O ports at 4c40 [size=64]
    Capabilities:
    Kernel driver in use: nForce2_smbus
    Kernel modules: i2c-nforce2

    00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10)
    Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at d4104000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20)
    Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 22
    Region 0: Memory at d4105000 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
    Subsystem: ASUSTeK Computer Inc. Device [1043:8166]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (500ns min, 1250ns max)
    Interrupt: pin A routed to IRQ 22
    Region 0: I/O ports at dc00 [size=256]
    Region 1: I/O ports at e000 [size=256]
    Region 2: Memory at d4103000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: Intel ICH
    Kernel modules: snd-intel8x0

    00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
    Region 4: I/O ports at f000 [size=16]
    Capabilities:
    Kernel driver in use: AMD_IDE
    Kernel modules: amd74xx, ide-pci-generic, ata_generic

    00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: I/O ports at 09f0 [size=8]
    Region 1: I/O ports at 0bf0 [size=4]
    Region 2: I/O ports at 0970 [size=8]
    Region 3: I/O ports at 0b70 [size=4]
    Region 4: I/O ports at d800 [size=16]
    Region 5: Memory at d4102000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: sata_nv
    Kernel modules: ide-pci-generic, ata_generic, sata_nv

    00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. Device [1043:815a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 23
    Region 0: I/O ports at 09e0 [size=8]
    Region 1: I/O ports at 0be0 [size=4]
    Region 2: I/O ports at 0960 [size=8]
    Region 3: I/O ports at 0b60 [size=4]
    Region 4: I/O ports at c400 [size=16]
    Region 5: Memory at d4101000 (32-bit, non-prefetchable) [size=4K]
    Capabilities:
    Kernel driver in use: sata_nv
    Kernel modules: ide-pci-generic, ata_generic, sata_nv

    00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=128
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: d4000000-d40fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

    00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
    Subsystem: ASUSTeK Computer Inc. Device [1043:816a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at d4100000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at b000 [size=8]
    Capabilities:
    Kernel driver in use: forcedeth
    Kernel modules: forcedeth

    00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00009000-00009fff
    Memory behind bridge: d0000000-d3ffffff
    Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities:

    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: k8temp
    Kernel modules: k8temp

    01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS [10de:0422] (rev a1)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 5
    Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
    Region 5: I/O ports at 9000 [size=128]
    [virtual] Expansion ROM at d3000000 [disabled] [size=128K]
    Capabilities:
    Kernel modules: nvidiafb

    05:02.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 80) (prog-if 10)
    Subsystem: ASUSTeK Computer Inc. Device [1043:808a]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (8000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=2K]
    Region 1: I/O ports at a000 [size=128]
    Capabilities:
    Kernel driver in use: ohci1394
    Kernel modules: ohci1394

    05:04.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01)
    Subsystem: Technotrend Systemtechnik GmbH Device [13c2:1010]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (3750ns min, 9500ns max)
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at d4001000 (32-bit, non-prefetchable) [size=512]
    Kernel driver in use: budget_ci dvb
    Kernel modules: budget-ci

    05:05.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
    Subsystem: C-Media Electronics Inc CM8738 [13f6:0111]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (500ns min, 6000ns max)
    Interrupt: pin A routed to IRQ 18
    Region 0: I/O ports at a400 [size=256]
    Capabilities:
    Kernel driver in use: C-Media PCI
    Kernel modules: snd-cmipci



    - -- System Information:
    Debian Release: lenny/sid
    APT prefers testing
    APT policy: (500, 'testing')
    Architecture: amd64 (x86_64)

    Kernel: Linux 2.6.26-1-amd64 (SMP w/1 CPU core)
    Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
    Shell: /bin/sh linked to /bin/bash

    Versions of packages linux-image-2.6.26-1-amd64 depends on:
    ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
    ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
    ii module-init-tools 3.4-1 tools for managing Linux kernel mo

    linux-image-2.6.26-1-amd64 recommends no packages.

    Versions of packages linux-image-2.6.26-1-amd64 suggests:
    ii grub 0.97-47 GRand Unified Bootloader (Legacy v
    pn linux-doc-2.6.26 (no description available)

    - -- debconf information:
    linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
    shared/kernel-image/really-run-bootloader: true
    linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
    linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
    linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
    linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
    linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.9 (GNU/Linux)

    iEYEARECAAYFAkjjFWkACgkQWWyJUu7Z70v1cQCfbMG1g8Rb/L+bGWXRs0rC3H3p
    E70An2DpI/HrO1aYp4apktQwCiQnWMVv
    =EHGL
    -----END PGP SIGNATURE-----



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#500758: marked as done (linux-image-2.6.26-1-amd64: Module budget-ci has no effect - Digital cable TV not supported?)


    Your message dated Wed, 1 Oct 2008 14:20:12 +0200
    with message-id <20081001122012.GB26293@wavehammer.waldi.eu.org>
    and subject line Re: Bug#500758: linux-image-2.6.26-1-amd64: Module budget-ci has no effect - Digital cable TV not supported?
    has caused the Debian Bug report #500758,
    regarding linux-image-2.6.26-1-amd64: Module budget-ci has no effect - Digital cable TV not supported?
    to be marked as done.

    This means that you claim that the problem has been dealt with.
    If this is not the case it is now your responsibility to reopen the
    Bug report if necessary, and/or fix the problem forthwith.

    (NB: If you are a system administrator and have no idea what this
    message is talking about, this may indicate a serious mail system
    misconfiguration somewhere. Please contact owner@bugs.debian.org
    immediately.)


    --
    500758: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=500758
    Debian Bug Tracking System
    Contact owner@bugs.debian.org with problems


  3. Bug#500758: closed by Bastian Blank <waldi@debian.org> (Re: Bug#500758: linux-image-2.6.26-1-amd64: Module budget-ci has no effect - Digital cable TV not supported?)

    I found that application programs for the /dev/dvb devices are in
    package dvb-apps; now everything works fine.

    David



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

+ Reply to Thread