Bug#499934: software-raid, full encrypted system, lvm - Debian

This is a discussion on Bug#499934: software-raid, full encrypted system, lvm - Debian ; Package: installation-reports Boot method: CD (IDE cd-rom) Image version: http://cdimage.debian.org/cdimage/da...64-netinst.iso Daily-Build: "Sat Sep 20 09:01:29 UTC 2008" "Binary-1 20080920-09:00" md5 = "3292bf5fc49bbed9cf53d4f0dc945fed" Date: 2008-09-20 Machine: Processor: AMD Athlon(tm) Dual Core Processor 4850e (2x 2,5 GHz) Mainboard: Gigabyte GA-MA78GM-S2H (BIOS version: ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Bug#499934: software-raid, full encrypted system, lvm

  1. Bug#499934: software-raid, full encrypted system, lvm

    Package: installation-reports

    Boot method: CD (IDE cd-rom)

    Image version: http://cdimage.debian.org/cdimage/da...64-netinst.iso
    Daily-Build: "Sat Sep 20 09:01:29 UTC 2008"
    "Binary-1 20080920-09:00"
    md5 = "3292bf5fc49bbed9cf53d4f0dc945fed"

    Date: 2008-09-20


    Machine:
    Processor: AMD Athlon(tm) Dual Core Processor 4850e (2x 2,5 GHz)
    Mainboard: Gigabyte GA-MA78GM-S2H (BIOS version: F5)
    Memory: Kingston KVR800D2N5K2/4G (4 GB, DDR2-800, Kingston ValueRAM)
    HDD: 4x Western Digital WD1000FYPS (1 TB, SATA) (ahci)


    Partitions:
    /dev/mapper/vglenny-lvlenny ext3 6732764 678892 5711856 11% /
    tmpfs tmpfs 1966588 0 1966588 0% /lib/init/rw
    udev tmpfs 10240 196 10044 2% /dev
    tmpfs tmpfs 1966588 0 1966588 0% /dev/shm
    /dev/md0 ext3 233225 16845 204339 8% /boot
    /dev/mapper/vgsrv-lvsrv ext3 2865558976 2122709744 71373683275% /srv


    Output of lspci -knn:
    00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
    00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602]
    Kernel modules: shpchp
    00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609]
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp
    00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391]
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd
    00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller [1002:4398]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd
    00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
    00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd
    00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller [1002:4398]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd
    00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd
    00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
    Kernel driver in use: piix4_smbus
    Kernel modules: i2c-piix4
    00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c]
    Kernel driver in use: ATIIXP_IDE
    Kernel modules: atiixp, ide-pci-generic, ata_generic
    00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
    00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
    00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd
    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Kernel driver in use: k8temp
    Kernel modules: k8temp
    01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3200 Graphics [1002:9610]
    01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f]
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
    Kernel driver in use: r8169
    Kernel modules: r8169


    Base System Installation Checklist:
    [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

    Initial boot: [O]
    Detect network card: [O]
    Configure network: [O]
    Detect CD: [O]
    Load installer modules: [O]
    Detect hard drives: [O]
    Partition hard drives: [O]
    Install base system: [O]
    Clock/timezone setup: [O]
    User/password setup: [O]
    Install tasks: [O]
    Install boot loader: [O]
    Overall install: [O]


    Comments/Problems:

    ## 1) language bug

    I choose german for the installation and i discover english messages duringthe raid-config.
    ("The RAID1 array will consist of both..." & "You have choosen to create a RAID1...")

    But, I tried it again with the Daily Build of today (Tue Sep 23 09:33:05 UTC 2008) and there was everything in german. (I tested the i386-Version. I can't check the amd64-version.)


    ## 2) softreset failed (device not ready)

    At the boot of Debian i got "softreset failed..." messages:

    ....
    [ 3.732525] scsi0 : ahci
    [ 3.732525] scsi1 : ahci
    [ 3.732525] scsi2 : ahci
    [ 3.732526] scsi3 : ahci
    [ 3.732526] scsi4 : ahci
    [ 3.732526] scsi5 : ahci
    [ 3.732526] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 1277
    [ 3.732526] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 1277
    [ 3.732526] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 1277
    [ 3.732526] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 1277
    [ 3.732526] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 1277
    [ 3.732526] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 1277
    [ 4.326434] ata1: softreset failed (device not ready)
    [ 4.326526] ata1: failed due to HW bug, retry pmp=0
    [ 4.490430] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 4.496603] ata1.00: HPA detected: current 1953523055, native 1953525168
    [ 4.496603] ata1.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
    [ 4.496603] ata1.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [ 4.496603] ata1.00: configured for UDMA/133
    [ 5.098073] ata2: softreset failed (device not ready)
    [ 5.098158] ata2: failed due to HW bug, retry pmp=0
    [ 5.261922] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 5.276979] ata2.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
    [ 5.276979] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [ 5.276979] ata2.00: configured for UDMA/133
    [ 5.898067] ata3: softreset failed (device not ready)
    [ 5.898153] ata3: failed due to HW bug, retry pmp=0
    [ 6.114055] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 6.129385] ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
    [ 6.129385] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [ 6.129385] ata3.00: configured for UDMA/133
    [ 6.614048] ata4: softreset failed (device not ready)
    [ 6.614134] ata4: failed due to HW bug, retry pmp=0
    [ 6.778065] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 6.793658] ata4.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
    [ 6.793658] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [ 6.793658] ata4.00: configured for UDMA/133
    [ 7.234041] ata5: SATA link down (SStatus 0 SControl 300)
    [ 7.556940] ata6: SATA link down (SStatus 0 SControl 300)
    [ 7.556916] scsi 0:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02..0 PQ: 0 ANSI: 5
    [ 7.556916] scsi 1:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02..0 PQ: 0 ANSI: 5
    [ 7.556916] scsi 2:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02..0 PQ: 0 ANSI: 5
    [ 7.556916] scsi 3:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02..0 PQ: 0 ANSI: 5
    ....

    /proc/version
    Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008

    With the Kernel "2.6.25" i didn't get these messages.

    I uploaded about 2 TB of data on this machine and I don't get a soft-reset during the upload. I discover this only at the boot.


    ## 3) raid resync

    Is it necessary to resync the new raid _at_ the installation? It took more than 12 hours to check my software-raid.

    Sep 20 20:41:43 mdcfg: mdadm: array /dev/md2 started.
    Sep 21 08:54:00 kernel: [50499.929621] md: md2: resync done.

    (Normally I don't wait at the installation until the raid resync is done.)


    ## 4)

    At the boot of Debian i got this warning (?):

    ....
    Aperture pointing to e820 RAM. Ignoring.
    Your BIOS doesn't leave a aperture memory hole
    Please enable the IOMMU option in the BIOS setup
    This costs you 64 MB of RAM
    ....


    ####


    If you need more informations, please contact me. Thank you!

    --
    http://kaoso.org/impressum.xhtml

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.9 (GNU/Linux)

    iEYEABECAAYFAkjZOr0ACgkQeqhihpkOly+DOQCgmL6dhl26g2 1kvFBS2eMFRtAq
    5T4An31pNmAMblu1nW/P+Lxjc8+1EmRz
    =t+Ts
    -----END PGP SIGNATURE-----


  2. Bug#499934: software-raid, full encrypted system, lvm

    also sprach Matthias Köhne [2008.09.23.2051 +0200]:
    > Is it necessary to resync the new raid _at_ the installation? It
    > took more than 12 hours to check my software-raid.
    >
    > Sep 20 20:41:43 mdcfg: mdadm: array /dev/md2 started.
    > Sep 21 08:54:00 kernel: [50499.929621] md: md2: resync done.
    >
    > (Normally I don't wait at the installation until the raid resync is done.)


    You don't have to. Just go on doing what you are doing.

    http://www.spinics.net/lists/raid/msg14089.html has more information
    on this topic.

    --
    .''`. martin f. krafft
    : :' : proud Debian developer, author, administrator, and user
    `. `'` http://people.debian.org/~madduck - http://debiansystem.info
    `- Debian - when you have better things to do than fixing systems

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.9 (GNU/Linux)

    iEYEARECAAYFAkjaI3gACgkQIgvIgzMMSnU1FQCeP5vYf1VprV oq9gaWTPYZlRY3
    PwwAoN4jtPUq4eugMgJhFAByMwk94K2Q
    =XHla
    -----END PGP SIGNATURE-----


+ Reply to Thread