Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device. - Debian

This is a discussion on Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device. - Debian ; Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-4 Severity: normal # mkudffs --udfrev=0x0150 --spartable=2 --media-type=dvdrw /dev/pktcdvd/0 Error opening device: Read-only file system 2.6.25-2-amd64 works. So there it is something broken in 2.6.26-1-amd64. -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (waldi@debian.org) (gcc ...

+ Reply to Thread
Results 1 to 5 of 5

Thread: Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device.

  1. Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device.

    Package: linux-image-2.6.26-1-amd64
    Version: 2.6.26-4
    Severity: normal


    # mkudffs --udfrev=0x0150 --spartable=2 --media-type=dvdrw /dev/pktcdvd/0
    Error opening device: Read-only file system

    2.6.25-2-amd64 works. So there it is something broken in 2.6.26-1-amd64.

    -- Package-specific info:
    ** Version:
    Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008

    ** Command line:
    root=/dev/mapper/sala-juuri ro vga=0x318

    ** Not tainted

    ** Kernel log:
    [ 48.946103] input: Power Button (FF) as /class/input/input5
    [ 48.992436] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
    [ 49.001878] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
    [ 49.082257] pnp: the driver 'parport_pc' has been registered
    [ 49.082260] parport_pc 00:0b: reported by Plug and Play ACPI
    [ 49.090356] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
    [ 49.114900] parport0: Legacy device
    [ 49.123722] parport_pc 00:0b: driver attached
    [ 49.127770] Linux video capture interface: v2.00
    [ 49.164611] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    [ 49.176660] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
    [ 49.185548] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 49.199683] ACPI: Power Button (FF) [PWRF]
    [ 49.208677] input: Power Button (CM) as /class/input/input6
    [ 49.220611] pwc: Philips webcam module version 10.0.13 loaded.
    [ 49.228629] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
    [ 49.238349] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
    [ 49.248367] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
    [ 49.260128] pwc: Philips SPC 900NC USB webcam detected.
    [ 49.298740] pwc: Registered as /dev/video0.
    [ 49.312937] usbcore: registered new interface driver Philips webcam
    [ 49.320986] ACPI: Power Button (CM) [PWRB]
    [ 49.464466] Error: Driver 'pcspkr' is already registered, aborting...
    [ 49.516302] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    [ 49.524301] PCI: Setting latency timer of device 0000:00:1b.0 to 64
    [ 49.840928] usbcore: registered new interface driver snd-usb-audio
    [ 88.299530] loop: module loaded
    [ 88.600001] vboxdrv: Trying to deactivate the NMI watchdog permanently...
    [ 88.600003] vboxdrv: Successfully done.
    [ 88.600004] vboxdrv: Found 2 processor cores.
    [ 88.600015] vboxdrv: fAsync=0 u64DiffCores=810.
    [ 88.600037] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 88.609279] vboxdrv: Successfully loaded version 1.6.2_OSE (interface 0x00070002).
    [ 88.671890] w83627ehf: Found W83627DHG chip at 0x290
    [ 88.704210] coretemp coretemp.0: Using relative temperature scale!
    [ 88.712237] coretemp coretemp.1: Using relative temperature scale!
    [ 95.512299] fuse init (API version 7.9)
    [ 95.539494] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
    [ 95.548087] ReiserFS: sda1: using ordered data mode
    [ 95.560774] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 95.578624] ReiserFS: sda1: checking transaction log (sda1)
    [ 95.600837] ReiserFS: sda1: Using r5 hash to sort names
    [ 95.660027] Adding 5242872k swap on /dev/mapper/sala-swappi. Priority:-1 extents:1 across:5242872k
    [ 96.428929] r8169: eth0: link up
    [ 96.437613] r8169: eth0: link up
    [ 97.947612] eth1: Link is Up 100 Mbps Full Duplex, Flow Control: None
    [ 97.947616] eth1: 10/100 speed: disabling TSO
    [ 101.712059] lp0: using parport0 (interrupt-driven).
    [ 101.738804] ppdev: user-space parallel port driver
    [ 102.439698] NET: Registered protocol family 10
    [ 102.449461] lo: Disabled Privacy Extensions
    [ 104.210345] cdrom: This disc doesn't have any tracks I recognize!
    [ 104.232191] pktcdvd: writer pktcdvd0 mapped to hda
    [ 104.809231] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    [ 113.124430] eth0: no IPv6 routers present
    [ 113.604082] eth1: no IPv6 routers present
    [ 265.581480] cdrom: This disc doesn't have any tracks I recognize!
    [ 382.804061] UDF-fs INFO UDF: Mounting volume 'LinuxUDF', timestamp 2008/09/05 10:46 (10b4)
    [ 480.284544] npviewer.bin[4499]: segfault at f5b98030 ip f78c34c0 sp ff85174c error 4 in libpthread-2.7.so[f78bc000+13000]
    [ 503.034691] npviewer.bin[4563]: segfault at f5c39030 ip f79644c0 sp ffef39bc error 4 in libpthread-2.7.so[f795d000+13000]
    [ 2341.480775] pktcdvd: writer pktcdvd0 unmapped
    [ 3106.375296] cdrom: This disc doesn't have any tracks I recognize!
    [ 3106.386919] pktcdvd: writer pktcdvd0 mapped to hda
    [ 3904.607581] cdrom: This disc doesn't have any tracks I recognize!
    [ 3925.327155] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 3925.327155] ISOFS: changing to secondary root
    [ 4119.978827] hda: irq timeout: status=0xd0 { Busy }
    [ 4119.978832] ide: failed opcode was: unknown
    [ 4146.946132] cdrom: This disc doesn't have any tracks I recognize!
    [ 7060.157247] hda: irq timeout: status=0xd0 { Busy }
    [ 7060.157252] ide: failed opcode was: unknown
    [ 9029.951906] cdrom: This disc doesn't have any tracks I recognize!
    [ 9157.521015] hda: irq timeout: status=0xd0 { Busy }
    [ 9157.521021] ide: failed opcode was: unknown
    [ 9191.140555] cdrom: This disc doesn't have any tracks I recognize!
    [ 9264.315440] hda: irq timeout: status=0xd0 { Busy }
    [ 9264.315445] ide: failed opcode was: unknown
    [ 9337.438921] cdrom: This disc doesn't have any tracks I recognize!
    [ 9620.522490] cdrom: This disc doesn't have any tracks I recognize!
    [11049.235504] hda: irq timeout: status=0xd0 { Busy }
    [11049.235509] ide: failed opcode was: unknown
    [11052.732000] hda: irq timeout: status=0xd0 { Busy }
    [11052.732006] ide: failed opcode was: unknown
    [11069.042162] cdrom: This disc doesn't have any tracks I recognize!
    [11094.378361] hda: irq timeout: status=0xd0 { Busy }
    [11094.378367] ide: failed opcode was: unknown
    [11185.973425] pktcdvd: writer pktcdvd0 unmapped
    [11193.121069] cdrom: This disc doesn't have any tracks I recognize!
    [11193.138141] pktcdvd: writer pktcdvd0 mapped to hda
    [11217.464665] cdrom: This disc doesn't have any tracks I recognize!
    [11335.918500] pktcdvd: writer pktcdvd0 unmapped
    [11388.693738] cdrom: This disc doesn't have any tracks I recognize!
    [11388.696613] pktcdvd: writer pktcdvd0 mapped to hda
    [11479.747072] cdrom: This disc doesn't have any tracks I recognize!
    [11491.457865] pktcdvd: writer pktcdvd0 unmapped
    [11499.858138] cdrom: This disc doesn't have any tracks I recognize!
    [11499.865687] pktcdvd: writer pktcdvd0 mapped to hda
    [11526.466714] pktcdvd: writer pktcdvd0 unmapped
    [11546.943582] cdrom: This disc doesn't have any tracks I recognize!
    [11546.949324] pktcdvd: writer pktcdvd0 mapped to hda

    ** Loaded modules:
    Module Size Used by
    isofs 35880 0
    zlib_inflate 18944 1 isofs
    nls_utf8 6272 0
    udf 75944 0
    nls_base 12932 3 isofs,nls_utf8,udf
    crc_itu_t 6528 1 udf
    pktcdvd 33296 1
    ipv6 288200 32
    ppdev 11656 0
    lp 14724 0
    video 24084 0
    output 7808 1 video
    ac 9352 0
    battery 16904 0
    acpi_cpufreq 11792 1
    cpufreq_powersave 6400 0
    cpufreq_stats 9120 0
    cpufreq_userspace 8452 0
    cpufreq_ondemand 11792 1
    cpufreq_conservative 11784 0
    freq_table 9344 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
    fuse 53184 1
    coretemp 11008 0
    w83627ehf 26512 0
    hwmon_vid 7296 1 w83627ehf
    vboxdrv 1658672 0
    loop 19468 0
    snd_usb_audio 91296 1
    snd_usb_lib 20224 1 snd_usb_audio
    snd_seq_dummy 7428 0
    snd_seq_oss 33152 0
    snd_seq_midi 11072 0
    snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
    snd_seq 54304 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
    snd_rawmidi 26784 2 snd_usb_lib,snd_seq_midi
    snd_hda_intel 434776 1
    snd_seq_device 11668 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd _rawmidi
    snd_hwdep 12040 1 snd_usb_audio
    snd_pcm_oss 41760 0
    snd_mixer_oss 18816 1 snd_pcm_oss
    snd_pcm 81800 3 snd_usb_audio,snd_hda_intel,snd_pcm_oss
    snd_timer 25744 2 snd_seq,snd_pcm
    snd 63688 15 snd_usb_audio,snd_seq_oss,snd_seq,snd_rawmidi,snd_ hda_intel,snd_seq_device,snd_hwdep,snd_pcm_oss,snd _mixer_oss,snd_pcm,snd_timer
    pwc 86208 0
    iTCO_wdt 15696 0
    compat_ioctl32 12288 1 pwc
    videodev 35840 2 pwc,compat_ioctl32
    parport_pc 31016 1
    parport 41776 3 ppdev,lp,parport_pc
    soundcore 12064 1 snd
    v4l1_compat 17284 1 videodev
    i2c_i801 13596 0
    i2c_core 27936 1 i2c_i801
    snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
    button 11680 0
    intel_agp 31728 0
    evdev 14208 4
    pcspkr 7040 0
    reiserfs 211072 2
    sha256_generic 13696 0
    aes_x86_64 12416 2
    aes_generic 32552 1 aes_x86_64
    cbc 7936 1
    dm_crypt 17032 1
    crypto_blkcipher 21636 3 cbc,dm_crypt
    dm_mirror 20608 0
    dm_log 13956 1 dm_mirror
    dm_snapshot 19400 0
    dm_mod 58864 11 dm_crypt,dm_mirror,dm_log,dm_snapshot
    ide_cd_mod 36360 1
    cdrom 37928 2 pktcdvd,ide_cd_mod
    sg 36448 0
    jmicron 6912 0 [permanent]
    usbhid 45792 0
    hid 41792 1 usbhid
    ff_memless 9224 1 usbhid
    ide_pci_generic 9220 0 [permanent]
    ide_core 128284 3 ide_cd_mod,jmicron,ide_pci_generic
    usb_storage 94400 0
    floppy 61672 0
    aic7xxx 141020 0
    scsi_transport_spi 29568 1 aic7xxx
    r8169 31492 0
    ata_generic 10116 0
    e1000e 99748 0
    ehci_hcd 36108 0
    uhci_hcd 25760 0
    sd_mod 29376 3
    thermal 22688 1
    processor 42304 2 acpi_cpufreq,thermal
    fan 9352 1
    thermal_sys 17728 4 video,thermal,processor,fan
    ahci 32520 2
    libata 165472 2 ata_generic,ahci
    scsi_mod 160760 6 sg,usb_storage,aic7xxx,scsi_transport_spi,sd_mod,l ibata
    dock 14112 1 libata

    ** PCI devices:
    00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ea]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Capabilities:
    Kernel modules: intel-agp

    00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00008000-00008fff
    Memory behind bridge: f8600000-fe6fffff
    Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 4: I/O ports at e000 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 4: I/O ports at e080 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=1K]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 22
    Region 0: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
    Capabilities:
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel

    00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: fe900000-fe9fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: fe800000-fe8fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00009000-00009fff
    Memory behind bridge: fe700000-fe7fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 4: I/O ports at d800 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at d880 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at dc00 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci-hcd

    00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=1K]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: fea00000-feafffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:

    00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Capabilities:
    Kernel modules: iTCO_wdt

    00:1f.2 SATA controller [0106]: Intel Corporation 82801HB (ICH8) 4 port SATA AHCI Controller [8086:2824] (rev 02) (prog-if 01)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 1274
    Region 0: I/O ports at ec00 [size=8]
    Region 1: I/O ports at e880 [size=4]
    Region 2: I/O ports at e800 [size=8]
    Region 3: I/O ports at e480 [size=4]
    Region 4: I/O ports at e400 [size=32]
    Region 5: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
    Capabilities:
    Kernel driver in use: ahci
    Kernel modules: ahci

    00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ec]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 18
    Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at 0400 [size=32]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801

    01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8800 GT [10de:0611] (rev a2)
    Subsystem: XFX Pine Group Inc. Device [1682:2330]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
    Region 5: I/O ports at 8c00 [size=128]
    Expansion ROM at fe6e0000 [disabled] [size=128K]
    Capabilities:
    Kernel modules: nvidiafb

    02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 01)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 16
    Region 5: Memory at fe7fe000 (32-bit, non-prefetchable) [size=8K]
    Expansion ROM at fe7e0000 [disabled] [size=64K]
    Capabilities:
    Kernel driver in use: ahci
    Kernel modules: ahci

    02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 0: I/O ports at 9c00 [size=8]
    Region 1: I/O ports at 9880 [size=4]
    Region 2: I/O ports at 9800 [size=8]
    Region 3: I/O ports at 9480 [size=4]
    Region 4: I/O ports at 9400 [size=16]
    Capabilities:
    Kernel driver in use: JMicron IDE
    Kernel modules: ata_generic, ide-pci-generic, jmicron

    03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81aa]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 1273
    Region 0: I/O ports at a800 [size=256]
    Region 2: Memory at fe8ff000 (64-bit, non-prefetchable) [size=4K]
    Expansion ROM at fe8c0000 [disabled] [size=128K]
    Capabilities:
    Kernel driver in use: r8169
    Kernel modules: r8169

    04:00.0 Ethernet controller [0200]: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) [8086:10b9] (rev 06)
    Subsystem: Intel Corporation Device [8086:1083]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 1272
    Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
    Region 1: Memory at fe9c0000 (32-bit, non-prefetchable) [size=128K]
    Region 2: I/O ports at bc00 [size=32]
    Expansion ROM at fe9a0000 [disabled] [size=128K]
    Capabilities:
    Kernel driver in use: e1000e
    Kernel modules: e1000e

    06:02.0 SCSI storage controller [0100]: Adaptec AHA-7850 [9004:5078] (rev 03)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 23
    Region 0: I/O ports at c800 [disabled] [size=256]
    Region 1: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: aic7xxx
    Kernel modules: aic7xxx



    -- System Information:
    Debian Release: lenny/sid
    APT prefers testing
    APT policy: (500, 'testing')
    Architecture: amd64 (x86_64)

    Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
    Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8)
    Shell: /bin/sh linked to /bin/bash

    Versions of packages linux-image-2.6.26-1-amd64 depends on:
    ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
    ii initramfs-tools [linux-initra 0.92g tools for generating an initramfs
    ii module-init-tools 3.4-1 tools for managing Linux kernel mo

    linux-image-2.6.26-1-amd64 recommends no packages.

    Versions of packages linux-image-2.6.26-1-amd64 suggests:
    ii grub 0.97-47 GRand Unified Bootloader (Legacy v
    pn linux-doc-2.6.26 (no description available)

    -- debconf information:
    linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
    shared/kernel-image/really-run-bootloader: true
    linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
    linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
    linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
    linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
    linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
    linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
    linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device.

    tags 497932 moreinfo
    thanks

    On Fri, Sep 05, 2008 at 04:46:59PM +0300, Jari Jylhä wrote:
    > # mkudffs --udfrev=0x0150 --spartable=2 --media-type=dvdrw /dev/pktcdvd/0
    > Error opening device: Read-only file system


    Why do you use /dev/pktcdvd/0 instead of /dev/hdX as the manpage say? My
    understanding is that the pktcdvd devices needs a valid filesystem/track
    on the medium.

    > [11546.943582] cdrom: This disc doesn't have any tracks I recognize!
    > [11546.949324] pktcdvd: writer pktcdvd0 mapped to hda


    Which this one clearly don't have.

    Bastian

    --
    A Vulcan can no sooner be disloyal than he can exist without breathing.
    -- Kirk, "The Menagerie", stardate 3012.4



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  3. Processed: Re: Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device.

    Processing commands for control@bugs.debian.org:

    > tags 497932 moreinfo

    Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device.
    There were no tags set.
    Tags added: moreinfo

    > thanks

    Stopping processing here.

    Please contact me if you need assistance.

    Debian bug tracking system administrator
    (administrator, Debian Bugs database)


    --
    To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  4. Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device.

    Bastian Blank kirjoitti:

    > Why do you use /dev/pktcdvd/0 instead of /dev/hdX as the manpage say? My
    > understanding is that the pktcdvd devices needs a valid filesystem/track
    > on the medium.


    I just followed orders in /usr/share/doc/udftools/README.Debian.gz

    dvd+rw-format -force /dev/hda
    growisofs -Z /dev/hda=/dev/zero
    mkudffs --udfrev=0x0150 --spartable=2 --media-type=dvdrw /dev/pktcdvd/0

    With 2.6.25-2-amd64 this works and with 2.6.26-1-amd64 fails.






    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  5. Bug#497932: marked as done (linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device.)


    Your message dated Sun, 21 Sep 2008 15:15:15 +0200
    with message-id <20080921131515.GB7717@wavehammer.waldi.eu.org>
    and subject line Re: Bug#497932: linux-image-2.6.26-1-amd64: /dev/pktcdvd/0is read only device.
    has caused the Debian Bug report #497932,
    regarding linux-image-2.6.26-1-amd64: /dev/pktcdvd/0 is read only device.
    to be marked as done.

    This means that you claim that the problem has been dealt with.
    If this is not the case it is now your responsibility to reopen the
    Bug report if necessary, and/or fix the problem forthwith.

    (NB: If you are a system administrator and have no idea what this
    message is talking about, this may indicate a serious mail system
    misconfiguration somewhere. Please contact owner@bugs.debian.org
    immediately.)


    --
    497932: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=497932
    Debian Bug Tracking System
    Contact owner@bugs.debian.org with problems


+ Reply to Thread