Bug#497623: linux-image-2.6.26: randomly crashes without traces - Debian

This is a discussion on Bug#497623: linux-image-2.6.26: randomly crashes without traces - Debian ; Package: linux-image-2.6.26-1-686 Version: 2.6.26-3 Severity: grave File: linux-image-2.6.26 Justification: renders package unusable Dear maintainers, I got really serious situations several times since using 2.6.26: somehow my system just crashes. It happens while browsing (no flash in use at that moment) ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: Bug#497623: linux-image-2.6.26: randomly crashes without traces

  1. Bug#497623: linux-image-2.6.26: randomly crashes without traces

    Package: linux-image-2.6.26-1-686
    Version: 2.6.26-3
    Severity: grave
    File: linux-image-2.6.26
    Justification: renders package unusable

    Dear maintainers,

    I got really serious situations several times since using 2.6.26:
    somehow my system just crashes. It happens while browsing (no flash in
    use at that moment) or just editing OOo documents. The screen turns sort
    of black and, well, that's it... no shortcuts working, even magic keys
    don't do anything. A cold reset is needed.
    Unfortunately logs don't seem to get the crash, either. Syslog ended
    last time with --MARK-- and so did /var/log/messages.
    Below is the standard information collected by reportbug. If you want me
    to do anything to help debugging whatever happens, just tell me.

    Cheers,
    Hauke

    -- Package-specific info:
    ** Version:
    Linux version 2.6.26-1-686 (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 12:56:41 UTC 2008

    ** Command line:
    root=UUID=ab37a766-ecfe-4ffd-97ea-9323129412cb ro vga=791

    ** Tainted: P (1)

    ** Kernel log:
    [ 5.421200] ohci_hcd 0000:00:13.4: OHCI Host Controller
    [ 5.423769] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
    [ 5.426361] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
    [ 5.484067] usb usb5: configuration #1 chosen from 1 choice
    [ 5.486638] hub 5-0:1.0: USB hub found
    [ 5.489207] hub 5-0:1.0: 2 ports detected
    [ 5.592072] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [ 5.594631] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 5.597189] usb usb5: Product: OHCI Host Controller
    [ 5.599730] usb usb5: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
    [ 5.602302] usb usb5: SerialNumber: 0000:00:13.4
    [ 5.606839] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
    [ 5.608825] ehci_hcd 0000:00:13.5: EHCI Host Controller
    [ 5.611403] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
    [ 5.614524] ehci_hcd 0000:00:13.5: debug port 1
    [ 5.617074] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
    [ 5.630222] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [ 5.632007] usb usb6: configuration #1 chosen from 1 choice
    [ 5.634595] hub 6-0:1.0: USB hub found
    [ 5.637132] hub 6-0:1.0: 10 ports detected
    [ 5.740074] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
    [ 5.742637] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 5.745206] usb usb6: Product: EHCI Host Controller
    [ 5.747736] usb usb6: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
    [ 5.750267] usb usb6: SerialNumber: 0000:00:13.5
    [ 5.754853] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
    [ 5.756753] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
    [ 5.759320] SB600_PATA: not 100% native mode: will probe irqs later
    [ 5.762474] ide0: BM-DMA at 0xe400-0xe407
    [ 5.765082] Probing IDE interface ide0...
    [ 6.500347] hda: ATAPI DVD D DH16D2P, ATAPI CD/DVD-ROM drive
    [ 7.284347] hdb: HL-DT-STDVD-RAM GSA-H58N, ATAPI CD/DVD-ROM drive
    [ 7.340033] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    [ 7.340312] hda: UDMA/33 mode selected
    [ 7.343329] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    [ 7.343540] hdb: UDMA/66 mode selected
    [ 7.346480] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    [ 7.423173] Driver 'sd' needs updating - please use bus_type methods
    [ 7.426082] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 7.430004] sd 0:0:0:0: [sda] Write Protect is off
    [ 7.432791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 7.432821] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7.446643] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 7.448006] sd 0:0:0:0: [sda] Write Protect is off
    [ 7.450825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 7.450857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7.453800] sda: sda1 sda2 <<6>hda: ATAPI 48X DVD-ROM drive, 198kB Cache
    [ 7.475630] Uniform CD-ROM driver Revision: 3.20
    [ 7.483915] sda5<6>hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
    [ 7.488966] sda6 >
    [ 7.492184] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 7.800588] PM: Starting manual resume from disk
    [ 7.829655] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
    [ 7.834110] SGI XFS Quota Management subsystem
    [ 7.860623] XFS mounting filesystem sda1
    [ 7.924008] Ending clean XFS mount for filesystem: sda1
    [ 9.109622] udevd version 125 started
    [ 10.248007] input: PC Speaker as /class/input/input1
    [ 10.834746] parport_pc 00:09: reported by Plug and Play ACPI
    [ 10.838132] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 10.925142] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 10.934347] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 11.078391] Linux agpgart interface v0.103
    [ 11.121069] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
    [ 11.142775] Error: Driver 'pcspkr' is already registered, aborting...
    [ 11.221149] input: Power Button (FF) as /class/input/input2
    [ 11.252299] ACPI: Power Button (FF) [PWRF]
    [ 11.255653] input: Power Button (CM) as /class/input/input3
    [ 11.288857] ACPI: Power Button (CM) [PWRB]
    [ 11.714248] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
    [ 11.806785] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
    [ 12.959502] Adding 2634620k swap on /dev/sda5. Priority:-1 extents:1 across:2634620k
    [ 13.276005] loop: module loaded
    [ 13.328010] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [ 13.400010] ndiswrapper: driver wg311v3 (NETGEAR,02/22/2005,3.1.1.7) loaded
    [ 13.409098] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21
    [ 13.413719] ndiswrapper: using IRQ 21
    [ 13.676092] wlan0: ethernet device 00:1e:2a:3e:6b:16 using NDIS driver: wg311v3, version: 0x3000036, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
    [ 13.683176] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
    [ 13.687209] usbcore: registered new interface driver ndiswrapper
    [ 13.732011] powernow-k8: Found 1 AMD Athlon(tm) Processor LE-1620 processors (1 cpu cores) (version 2.20.00)
    [ 13.769282] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xc
    [ 13.773251] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xe
    [ 13.776860] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x10
    [ 13.780377] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x10
    [ 13.783812] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
    [ 13.916951] device-mapper: uevent: version 1.0.3
    [ 13.921262] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
    [ 14.136008] XFS mounting filesystem sda6
    [ 14.240038] Ending clean XFS mount for filesystem: sda6
    [ 15.736011] r8169: eth0: link up
    [ 15.750174] r8169: eth0: link up
    [ 19.781497] lp0: using parport0 (interrupt-driven).
    [ 19.807213] ppdev: user-space parallel port driver
    [ 21.000018] Clocksource tsc unstable (delta = -135294650 ns)
    [ 21.888780] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    [ 22.070170] NET: Registered protocol family 10
    [ 22.077506] lo: Disabled Privacy Extensions
    [ 25.326420] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 43.544013] eth0: no IPv6 routers present

    ** Loaded modules:
    Module Size Used by
    ipv6 235172 18
    ppdev 6468 0
    lp 8164 0
    video 16400 0
    output 2912 1 video
    ac 3264 0
    battery 6272 0
    cpufreq_stats 3776 0
    cpufreq_conservative 5960 0
    dm_snapshot 14340 0
    dm_mirror 15104 0
    dm_log 8452 1 dm_mirror
    dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
    cpufreq_userspace 3172 0
    cpufreq_ondemand 6476 1
    cpufreq_powersave 1856 0
    powernow_k8 12036 0
    freq_table 4224 3 cpufreq_stats,cpufreq_ondemand,powernow_k8
    ndiswrapper 152412 0
    loop 12748 0
    snd_hda_intel 324248 0
    snd_seq_dummy 2660 0
    snd_seq_oss 24992 0
    button 6064 0
    snd_seq_midi 5728 0
    snd_rawmidi 18560 1 snd_seq_midi
    snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
    snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
    i2c_piix4 7216 0
    psmouse 32336 0
    ati_agp 6220 0
    agpgart 28776 1 ati_agp
    snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
    evdev 8000 3
    k8temp 4064 0
    snd_pcm_oss 32800 0
    snd_mixer_oss 12320 1 snd_pcm_oss
    i2c_core 19828 1 i2c_piix4
    shpchp 25528 0
    pci_hotplug 23460 1 shpchp
    serio_raw 4740 0
    parport_pc 22500 1
    parport 30988 3 ppdev,lp,parport_pc
    snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
    snd_timer 17800 2 snd_seq,snd_pcm
    snd 45604 9 snd_hda_intel,snd_seq_oss,snd_rawmidi,snd_seq,snd_ seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_t imer
    soundcore 6368 1 snd
    snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
    pcspkr 2432 0
    xfs 458040 2
    ide_cd_mod 27684 0
    cdrom 30176 1 ide_cd_mod
    sd_mod 22200 4
    ata_generic 4676 0
    ide_pci_generic 3908 0 [permanent]
    atiixp 3396 0 [permanent]
    ide_core 92628 3 ide_cd_mod,ide_pci_generic,atiixp
    ehci_hcd 28428 0
    ahci 23176 3
    ohci_hcd 18500 0
    usbcore 118160 4 ndiswrapper,ehci_hcd,ohci_hcd
    libata 140416 2 ata_generic,ahci
    scsi_mod 129356 2 sd_mod,libata
    dock 8272 1 libata
    r8169 23716 0
    thermal 15228 0
    processor 32576 2 powernow_k8,thermal
    fan 4164 0
    thermal_sys 10856 4 video,thermal,processor,fan

    ** PCI devices:
    00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
    Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
    Kernel modules: ati-agp

    00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 99
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: fda00000-fdbfffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel modules: shpchp

    00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: fdf00000-fdffffff
    Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities:
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

    00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
    Interrupt: pin A routed to IRQ 22
    Region 0: I/O ports at fc00 [size=8]
    Region 1: I/O ports at f800 [size=4]
    Region 2: I/O ports at f400 [size=8]
    Region 3: I/O ports at f000 [size=4]
    Region 4: I/O ports at ec00 [size=16]
    Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
    Capabilities:
    Kernel driver in use: ahci
    Kernel modules: ahci

    00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

    00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin D routed to IRQ 19
    Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
    Capabilities:
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

    00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop+ ParErr+ Stepping+ SERR+ FastB2B+ DisINTx+
    Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ SERR+ Latency: 0
    Region 0: I/O ports at 0b00 [size=16]
    Capabilities:
    Kernel driver in use: piix4_smbus
    Kernel modules: i2c-piix4

    00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
    Interrupt: pin A routed to IRQ 16
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=1]
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374 [size=1]
    Region 4: I/O ports at e400 [size=16]
    Kernel driver in use: ATIIXP_IDE
    Kernel modules: atiixp

    00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383]
    Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin ? routed to IRQ 16
    Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
    Capabilities:
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel

    00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
    Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0

    00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: fde00000-fdefffff
    Prefetchable memory behind bridge: fdd00000-fddfffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities:

    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities:
    Kernel driver in use: k8temp
    Kernel modules: k8temp

    01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e]
    Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 3
    Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M]
    Region 2: Memory at fdbf0000 (64-bit, non-prefetchable) [size=64K]
    Region 4: I/O ports at cc00 [size=256]
    Region 5: Memory at fda00000 (32-bit, non-prefetchable) [size=1M]
    Capabilities:

    02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
    Subsystem: ASUSTeK Computer Inc. Device [1043:81aa]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 222
    Region 0: I/O ports at dc00 [size=256]
    Region 2: Memory at fdfff000 (64-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
    Capabilities:
    Kernel driver in use: r8169
    Kernel modules: r8169

    03:06.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa] (rev 03)
    Subsystem: Netgear Device [1385:6b00]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
    Region 1: Memory at fdee0000 (32-bit, non-prefetchable) [size=64K]
    Capabilities:
    Kernel driver in use: ndiswrapper



    -- System Information:
    Debian Release: lenny/sid
    APT prefers testing
    APT policy: (500, 'testing')
    Architecture: i386 (i686)

    Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
    Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
    Shell: /bin/sh linked to /bin/bash

    Versions of packages linux-image-2.6.26-1-686 depends on:
    ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
    ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
    ii module-init-tools 3.4-1 tools for managing Linux kernel mo

    Versions of packages linux-image-2.6.26-1-686 recommends:
    ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i

    Versions of packages linux-image-2.6.26-1-686 suggests:
    ii grub 0.97-46 GRand Unified Bootloader (Legacy v
    pn linux-doc-2.6.26 (no description available)

    -- debconf information:
    linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
    shared/kernel-image/really-run-bootloader: true
    linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
    linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
    linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
    linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
    linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
    linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
    linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
    linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
    linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
    linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
    linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
    linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
    linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
    linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
    linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
    linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
    linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
    linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
    linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  2. Bug#497623: linux-image-2.6.26: randomly crashes without traces

    Some additional info to this bug report:

    I just found #479709 which seems to be very similar, although...
    Users in #479709 found some relation to chrony which is not installed on
    my system. OTOH my system hung twice while booting at "setting system
    clock" which again leads to some clock or time problems...
    I don't know that much about kernel stuff but I thought this could help.

    Thanks for your time!
    Hauke



    --
    To UNSUBSCRIBE, email to debian-bugs-dist-REQUEST@lists.debian.org
    with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

  3. Bug#497623: marked as done (linux-image-2.6.26: randomly crashes without traces)


    Your message dated Sun, 9 Nov 2008 01:57:34 +0100
    with message-id <20081109005734.GA3908@galadriel.inutil.org>
    and subject line Re: Fixed in 2.6.26-9 (sid)
    has caused the Debian Bug report #497623,
    regarding linux-image-2.6.26: randomly crashes without traces
    to be marked as done.

    This means that you claim that the problem has been dealt with.
    If this is not the case it is now your responsibility to reopen the
    Bug report if necessary, and/or fix the problem forthwith.

    (NB: If you are a system administrator and have no idea what this
    message is talking about, this may indicate a serious mail system
    misconfiguration somewhere. Please contact owner@bugs.debian.org
    immediately.)


    --
    497623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=497623
    Debian Bug Tracking System
    Contact owner@bugs.debian.org with problems


+ Reply to Thread